[Group.of.nepali.translators] [Bug 1753439] Re: Redpine: BLE scanning for nearby beacons per second is too low and result high loss rate.
This bug was fixed in the package linux-firmware - 1.157.18 --- linux-firmware (1.157.18) xenial; urgency=medium * Redpine: BLE scanning for nearby beacons per second is too low and result high loss rate (LP: #1753439) - UBUNTU: linux-firmware: update firmware images for Redpine 9113 chipset * Redpine: BLE radio lost issue (LP: #1757443) - UBUNTU: linux-firmware: update firmware images for Redpine 9113 chipset * Update firmware for 18.04 hwe kernel (LP: #1763823) - linux-firmware: liquidio: update firmware to v1.4.2 - linux-firmware: liquidio: update firmware to v1.5.1 - linux-firmware: liquidio: update firmware to v1.6.0 - firmware: tegra: Add VIC firmware - linux-firmware: liquidio: update firmware to v1.6.1 - rtlwifi: rtl8822be: Add firmware for new driver/device - linux-firmware/i915: Add Geminilake DMC version 1.04 - iwlwifi: add new firmware version 34 for 8000C and 8265 - linux-firmware: liquidio: update firmware to v1.7.0 - iwlwifi: add firmware version 34 for new 9000 series - amdgpu: add new CP firmware for polaris chips - Mellanox: Add new mlxsw_spectrum firmware 13.1530.152 - brcm: introduce firmware for bcm43430 revision 0 - amdgpu: add firmware for Raven - brcm: add CYW4373 firmwares and Cypress license file - amdgpu: update vcn firmware for raven - Revert "UBUNTU: Remove obsolete bnx2 firmware" - Revert "UBUNTU: Remove duplicate bnx2 firmware" - Revert "UBUNTU: Remove obsolete bnx2 firmware" - Revert "UBUNTU: Remove obsolete bnx2 firmware" - UBUNTU: update nic-firmware.lst for 18.04 hwe kernel * Update Qualcomm QCA6174-HMC (DW1820) to comply with CE-RED (Radio Emissions Directive) (LP: #1752044) - ath10k: QCA6174 hw3.0: update firmware-6.bin to WLAN.RM.4.4.1-00079-QCARMSWPZ-1 - ath10k: QCA6174 hw3.0: update board-2.bin -- Seth Forshee Tue, 24 Apr 2018 10:58:13 -0500 ** Changed in: linux-firmware (Ubuntu Xenial) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of नेपाली भाषा समायोजकहरुको समूह, which is subscribed to Xenial. Matching subscriptions: Ubuntu 16.04 Bugs https://bugs.launchpad.net/bugs/1753439 Title: Redpine: BLE scanning for nearby beacons per second is too low and result high loss rate. Status in linux package in Ubuntu: Confirmed Status in linux-firmware package in Ubuntu: Invalid Status in linux source package in Xenial: Fix Released Status in linux-firmware source package in Xenial: Fix Released Status in linux source package in Bionic: Confirmed Status in linux-firmware source package in Bionic: Invalid Bug description: SRU Justification Impact: BLE scanning for nearby beacons per second is too low and result high loss rate. Fix: Updated firmware. Test Case: Test on affected hardware using instructions below. Regression Potential: Limited to specific hardware. --- Steps to replicate the issue: 1. Power on the BT device, then change the terminal by "Ctil+F1" or open another putty to ssh SUT. 2.Use command below to discover BLE device. $ sudo stdbuf -i0-o0 -e0 /snap/bluez/current/usr/bin/hcitool lescan --duplicates --passive | perl -nle 'print scalar(localtime), " ",$_' 3. log as attachment. This bug is for tracking purposes only, do not triage. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1753439/+subscriptions ___ Mailing list: https://launchpad.net/~group.of.nepali.translators Post to : group.of.nepali.translators@lists.launchpad.net Unsubscribe : https://launchpad.net/~group.of.nepali.translators More help : https://help.launchpad.net/ListHelp
[Group.of.nepali.translators] [Bug 1753439] Re: Redpine: BLE scanning for nearby beacons per second is too low and result high loss rate.
This bug was fixed in the package linux - 4.4.0-119.143 --- linux (4.4.0-119.143) xenial; urgency=medium * linux: 4.4.0-119.143 -proposed tracker (LP: #1760327) * Dell XPS 13 9360 bluetooth scan can not detect any device (LP: #1759821) - Revert "Bluetooth: btusb: fix QCA Rome suspend/resume" linux (4.4.0-118.142) xenial; urgency=medium * linux: 4.4.0-118.142 -proposed tracker (LP: #1759607) * Kernel panic with AWS 4.4.0-1053 / 4.4.0-1015 (Trusty) (LP: #1758869) - x86/microcode/AMD: Do not load when running on a hypervisor * CVE-2018-8043 - net: phy: mdio-bcm-unimac: fix potential NULL dereference in unimac_mdio_probe() linux (4.4.0-117.141) xenial; urgency=medium * linux: 4.4.0-117.141 -proposed tracker (LP: #1755208) * Xenial update to 4.4.114 stable release (LP: #1754592) - x86/asm/32: Make sync_core() handle missing CPUID on all 32-bit kernels - usbip: prevent vhci_hcd driver from leaking a socket pointer address - usbip: Fix implicit fallthrough warning - usbip: Fix potential format overflow in userspace tools - x86/microcode/intel: Fix BDW late-loading revision check - x86/retpoline: Fill RSB on context switch for affected CPUs - sched/deadline: Use the revised wakeup rule for suspending constrained dl tasks - can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once - can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once - PM / sleep: declare __tracedata symbols as char[] rather than char - time: Avoid undefined behaviour in ktime_add_safe() - timers: Plug locking race vs. timer migration - Prevent timer value 0 for MWAITX - drivers: base: cacheinfo: fix x86 with CONFIG_OF enabled - drivers: base: cacheinfo: fix boot error message when acpi is enabled - PCI: layerscape: Add "fsl,ls2085a-pcie" compatible ID - PCI: layerscape: Fix MSG TLP drop setting - mmc: sdhci-of-esdhc: add/remove some quirks according to vendor version - fs/select: add vmalloc fallback for select(2) - hwpoison, memcg: forcibly uncharge LRU pages - cma: fix calculation of aligned offset - mm, page_alloc: fix potential false positive in __zone_watermark_ok - ipc: msg, make msgrcv work with LONG_MIN - x86/ioapic: Fix incorrect pointers in ioapic_setup_resources() - ACPI / processor: Avoid reserving IO regions too early - ACPI / scan: Prefer devices without _HID/_CID for _ADR matching - ACPICA: Namespace: fix operand cache leak - netfilter: x_tables: speed up jump target validation - netfilter: arp_tables: fix invoking 32bit "iptable -P INPUT ACCEPT" failed in 64bit kernel - netfilter: nf_dup_ipv6: set again FLOWI_FLAG_KNOWN_NH at flowi6_flags - netfilter: nf_ct_expect: remove the redundant slash when policy name is empty - netfilter: nfnetlink_queue: reject verdict request from different portid - netfilter: restart search if moved to other chain - netfilter: nf_conntrack_sip: extend request line validation - netfilter: use fwmark_reflect in nf_send_reset - ext2: Don't clear SGID when inheriting ACLs - reiserfs: fix race in prealloc discard - reiserfs: don't preallocate blocks for extended attributes - reiserfs: Don't clear SGID when inheriting ACLs - fs/fcntl: f_setown, avoid undefined behaviour - scsi: libiscsi: fix shifting of DID_REQUEUE host byte - Input: trackpoint - force 3 buttons if 0 button is reported - usb: usbip: Fix possible deadlocks reported by lockdep - usbip: fix stub_rx: get_pipe() to validate endpoint number - usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input - usbip: prevent leaking socket pointer address in messages - um: link vmlinux with -no-pie - vsyscall: Fix permissions for emulate mode with KAISER/PTI - eventpoll.h: add missing epoll event masks - x86/microcode/intel: Extend BDW late-loading further with LLC size check - hrtimer: Reset hrtimer cpu base proper on CPU hotplug - dccp: don't restart ccid2_hc_tx_rto_expire() if sk in closed state - ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL - ipv6: fix udpv6 sendmsg crash caused by too small MTU - ipv6: ip6_make_skb() needs to clear cork.base.dst - lan78xx: Fix failure in USB Full Speed - net: igmp: fix source address check for IGMPv3 reports - tcp: __tcp_hdrlen() helper - net: qdisc_pkt_len_init() should be more robust - pppoe: take ->needed_headroom of lower device into account on xmit - r8169: fix memory corruption on retrieval of hardware statistics. - sctp: do not allow the v4 socket to bind a v4mapped v6 address - sctp: return error if the asoc has been peeled off in sctp_wait_for_sndbuf - vmxnet3: repair memory leak - net: Allow neigh contructor functions ability to modify the primary_key - ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY
[Group.of.nepali.translators] [Bug 1753439] Re: Redpine: BLE scanning for nearby beacons per second is too low and result high loss rate.
** Also affects: linux (Ubuntu Bionic) Importance: Medium Status: Confirmed ** Also affects: linux-firmware (Ubuntu Bionic) Importance: Undecided Status: Invalid -- You received this bug notification because you are a member of नेपाली भाषा समायोजकहरुको समूह, which is subscribed to Xenial. Matching subscriptions: Ubuntu 16.04 Bugs https://bugs.launchpad.net/bugs/1753439 Title: Redpine: BLE scanning for nearby beacons per second is too low and result high loss rate. Status in linux package in Ubuntu: Confirmed Status in linux-firmware package in Ubuntu: Invalid Status in linux source package in Xenial: Fix Committed Status in linux-firmware source package in Xenial: Fix Committed Status in linux source package in Bionic: Confirmed Status in linux-firmware source package in Bionic: Invalid Bug description: Steps to replicate the issue: 1. Power on the BT device, then change the terminal by "Ctil+F1" or open another putty to ssh SUT. 2.Use command below to discover BLE device. $ sudo stdbuf -i0-o0 -e0 /snap/bluez/current/usr/bin/hcitool lescan --duplicates --passive | perl -nle 'print scalar(localtime), " ",$_' 3. log as attachment. This bug is for tracking purposes only, do not triage. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1753439/+subscriptions ___ Mailing list: https://launchpad.net/~group.of.nepali.translators Post to : group.of.nepali.translators@lists.launchpad.net Unsubscribe : https://launchpad.net/~group.of.nepali.translators More help : https://help.launchpad.net/ListHelp
[Group.of.nepali.translators] [Bug 1753439] Re: Redpine: BLE scanning for nearby beacons per second is too low and result high loss rate.
** Also affects: linux-firmware (Ubuntu) Importance: Undecided Status: New ** Changed in: linux-firmware (Ubuntu) Status: New => Invalid ** Changed in: linux-firmware (Ubuntu Xenial) Status: New => Fix Committed -- You received this bug notification because you are a member of नेपाली भाषा समायोजकहरुको समूह, which is subscribed to Xenial. Matching subscriptions: Ubuntu 16.04 Bugs https://bugs.launchpad.net/bugs/1753439 Title: Redpine: BLE scanning for nearby beacons per second is too low and result high loss rate. Status in linux package in Ubuntu: Confirmed Status in linux-firmware package in Ubuntu: Invalid Status in linux source package in Xenial: Fix Committed Status in linux-firmware source package in Xenial: Fix Committed Bug description: Steps to replicate the issue: 1. Power on the BT device, then change the terminal by "Ctil+F1" or open another putty to ssh SUT. 2.Use command below to discover BLE device. $ sudo stdbuf -i0-o0 -e0 /snap/bluez/current/usr/bin/hcitool lescan --duplicates --passive | perl -nle 'print scalar(localtime), " ",$_' 3. log as attachment. This bug is for tracking purposes only, do not triage. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1753439/+subscriptions ___ Mailing list: https://launchpad.net/~group.of.nepali.translators Post to : group.of.nepali.translators@lists.launchpad.net Unsubscribe : https://launchpad.net/~group.of.nepali.translators More help : https://help.launchpad.net/ListHelp
[Group.of.nepali.translators] [Bug 1753439] Re: Redpine: BLE scanning for nearby beacons per second is too low and result high loss rate.
** Also affects: linux (Ubuntu Xenial) Importance: Undecided Status: New -- You received this bug notification because you are a member of नेपाली भाषा समायोजकहरुको समूह, which is subscribed to Xenial. Matching subscriptions: Ubuntu 16.04 Bugs https://bugs.launchpad.net/bugs/1753439 Title: Redpine: BLE scanning for nearby beacons per second is too low and result high loss rate. Status in linux package in Ubuntu: Confirmed Status in linux source package in Xenial: New Bug description: Steps to replicate the issue: 1. Power on the BT device, then change the terminal by "Ctil+F1" or open another putty to ssh SUT. 2.Use command below to discover BLE device. $ sudo stdbuf -i0-o0 -e0 /snap/bluez/current/usr/bin/hcitool lescan --duplicates --passive | perl -nle 'print scalar(localtime), " ",$_' 3. log as attachment. This bug is for tracking purposes only, do not triage. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1753439/+subscriptions ___ Mailing list: https://launchpad.net/~group.of.nepali.translators Post to : group.of.nepali.translators@lists.launchpad.net Unsubscribe : https://launchpad.net/~group.of.nepali.translators More help : https://help.launchpad.net/ListHelp