tion.
10.3.4.12/13 (UEFI 2.8 spec) for IPv4/IPv6.
10.3.4.23 for URI.
(And 10.3.4.21 for iSCSI.)
But if you are only asking because you found the (NULLed-out) PXE
protocol implemented, then I would suggest we can ignore this for now.
I guess it could be useful for netbooting GRUB (the device p
.
Can GRUB already do the same when the EFI_PXE_BASE_CODE_PROTOCOL is not
present?
Yes. As of very recently (proper* DHCP support was only merged in
March 2019, so is included in 2.04 release, prior to that it
technically performed BOOTP).
SNP means you do your own networking - it gives you access
t; > Can GRUB already do the same when the EFI_PXE_BASE_CODE_PROTOCOL is not
> > present?
>
> Yes. As of very recently (proper* DHCP support was only merged in
> March 2019, so is included in 2.04 release, prior to that it
> technically performed BOOTP).
>
> SNP means you do y
+Peter Jones (sorry Peter)
On Tue, Aug 06, 2019 at 08:34:58AM +0200, Heinrich Schuchardt wrote:
> iPXE uses the EFI simple network protocol to execute DHCP.
OK.
> Can GRUB already do the same when the EFI_PXE_BASE_CODE_PROTOCOL is not
> present?
Yes. As of very recently (proper* DHC
Hello Leif,
iPXE uses the EFI simple network protocol to execute DHCP.
Can GRUB already do the same when the EFI_PXE_BASE_CODE_PROTOCOL is not
present?
What I do not understand about GRUB's grub_net_configure_by_dhcp_ack()
is that it silently assumes IPv4 being used without even checking
