I have been having lots of problems with my LAN.
COX cable. New Motorola SB1020 modem... new coax cabling
Netgear 314 Router
Belkin WAP
Latitude 233MX acting as a print and FTP server
Dlink 8 port 10/100 switch
Netgear USB Print server
I have a
In an old PC I have 4 HDs in RAID 0+1.
I want to modify the configuration and reduce the HDs
from 4 to 2 and the RAID from 0+1 to 1 (mirror only)
First problem is that I'm not sure which of the HDs are
dedicated to striping and which to mirror (they are
identical drives) so I cannot identify
This is worth a reprise, especially since the location changed:
http://mindprod.com/jgloss/unmain.html
Steve
Could be going bad. The last Linksys I lost did the same thing, as did
the D-Link before that..
Really frustrating. Intermittent, worked most of the time, had to reset
(power cycle) the DSL modem and router every 2-3 or 3-4 days. Reboot
PC's, etc.
Drove me nuts for a couple-three weeks.
At 10:59 AM 12/01/2006, JRS wrote:
Lost 2 of these cheap consumer routers in 3 years.
Interesting. I haven't seen that level of failure here at all. Are you
surge supressing your routers?
T
I recently replaced my Modem due to having to reset often, now the modem is
fine and a couple of time a week need to reset my fvs318, really hate the
thought of replacing it with something inferior.
Wish I could just have it reboot everyday at 3 AM or something. :-)
Internet/LAN seem fine when
At 10:13 AM 1/12/2006, you wrote:
I recently replaced my Modem due to having to reset often, now the modem
is fine and a couple of time a week need to reset
When I activated my new Modem, Cox told me not to feel so bad, they have
been supporting DOCsys 1.1 but pretty soon I was going to have
At 06:59 AM 1/12/2006, you wrote:
Could be going bad. The last Linksys I lost did the same thing, as did
the D-Link before that..
JRS [EMAIL PROTECTED]
This is good to know
What is the max length on SATA cables. I see Cyber guys has 19 inch ... and
39 inch!
Is 39 inch OK?
vpn router with some nice key word blocking ability built in but you may be
right, recently set up a dlink for a customer and it had the ability to check
itself for firmware updates. Router live update. :-)
fp
At 12:05 PM 1/12/2006, Winterlight Poked the stick with:
fvs ? I take it the 318 is
At 03:28 PM 12/01/2006, Winterlight wrote:
What is the max length on SATA cables. I see Cyber guys has 19 inch ...
and 39 inch!
Is 39 inch OK?
But this:
http://en.wikipedia.org/wiki/SATA
Says up to a metre.
T
At 03:28 PM 12/01/2006, Winterlight wrote:
What is the max length on SATA cables. I see Cyber guys has 19 inch ...
and 39 inch!
Is 39 inch OK?
According to this:
http://www.ata-atapi.com/sata.htm
SATA supports a single device per SATA cable. A SATA cable can be longer
than a parallel ATA
At 09:59 01/12/06, you wrote:
I finally ended up buying a new router for 60 bucks from Office Depot.
Problem solved. Lost 2 of these cheap consumer routers in 3 years.
I've had three power supplies go bad on Netgear PS105 8 port 10/100
switches.
These switch's work for a couple of years,
Can you go to jail for pixel flogging?
- Original Message -
From: Anthony Q. Martin [EMAIL PROTECTED]
To: The Hardware List hardware@hardwaregroup.com
Sent: Thursday, January 12, 2006 6:15 PM
Subject: Re: [H] would this be a good idea for THG
Jim Edwards wrote:
Power supply checks out OK on the meter and I don't see any flashing
lights, other then the constant flashing activity light. I did picked up a
new router today, but when I got home this evening everything is running
fine it's driving me nuts! When it goes south again I will try swapping
Billions of copycat pixel sites out there already. None make any money. The
few that generate any cash are, what else, porn pixel sites.
The kid did good.
From: Jim Edwards [EMAIL PROTECTED]
Reply-To: The Hardware List hardware@hardwaregroup.com
To: hardware@hardwaregroup.com
Subject: [H]
At 08:04 PM 1/12/2006, Jim Edwards typed:
http://www.theregister.co.uk/2006/01/12/million_pixels/
So it wouldn't be the first one but it could help to ensure THG and
the list stays around for a very long time. I donno... Just a thought.
At the price of machines today a million would be a
17 matches
Mail list logo