Hey guys, another quick question; hope you guys can steer me in the right
direction.
I've got an Dell Dimension XPS Gen3/4 circa 12/2004; it's a pretty beasty
machine still (top-of-the-line back then) with its own monster tower case
and dedicated power supply section on the bottom. I'm just
The latest Catalyst drivers have fan control so you can turn it down
manually. Also, check your CPU temps as your heat sink might be clogged
with dust causing the BIOS fan control to run full blast (that is if
it's 4 pin mobo connection). SpeedFan is the best utility for fan
control but only
if the run is fairly short.
(All other nics, etc, need to be 1G though...)
Rick Glazier
From: DHSinclair
Steve,
Understand your glitch with the new Gbit switch..
__ NOD32 3989 (20090406) Information __
This message was checked by NOD32 antivirus system.
http
Hey All,
Looking for a voodoo 3 to put in an Amiga4000. Someone in this group
might just have one. Any help?
TIA,
Al
How does anyone tolerate all that noise coming from a PC. End the PC noise!
http://www.endpcnoise.com
http://www.silentpcreview.com/
Get rid of the noise makers!
A good case will let you swap out the other 80mm fans with 120 mm ones.
Also, the various chipset fans can be loud. As can the
Hello Al,
Monday, April 6, 2009, 9:01:07 AM, you wrote:
Hey All,
Looking for a voodoo 3 to put in an Amiga4000. Someone in this group
might just have one. Any help?
TIA,
Al
I have a couple voodoo and a voodoo2 - no voodoo3
--
Regards,
joeuser - Still looking for the 'any' key...
Joe User wrote:
Hello Al,
I have a couple voodoo and a voodoo2 - no voodoo3
Thanks. I believe my quest has been answered.
Cheers,
Al
Yes, 1GHz and it also might have to be an unbalanced 4/0db if signal is weak.
Steve Tomporowski wrote:
Splitting the Video: One thing I haven't asked about on the list.
Wanted to split the cable line that goes to the modem so that I can
watch TV on one of the boxes (hauppauge
Hmm, ok on that note, what's the 1 Ghz for the splitter refer to-or the
4/0db unbalanced thing? I've got TW Cable at home and have it split 4 ways
(this is after it's split once to the bedroom and living room from the
junction box at the back of the apt) but the cable techs have tested the
signal
-Original Message-
From: Bino Gopal
Hmm, ok on that note, what's the 1 Ghz for the splitter refer
to-or the 4/0db unbalanced thing? I've got TW Cable at home and have
it split 4 ways
(this is after it's split once to the bedroom and living room from the
junction box at the back
During lunch I picked up a couple of CAT6 cables and a 1GHZ splitter.
So far, the splitter is working nicely, modem is happy. Next will be
the CAT6 cables, and, yes, both computers have gigabit network on
board. One cable run is the std 15ft but probably CAT5 or less (not
marked) and the
I guess you've already been inside the beast, so there is the
possibility that you can replace the fan/heatsink on the CPU to
something quieter and maybe cut down on the number of fans. My oldest
system was really over-blown with fans (pun intended), so when it got
too noisy, I just
Steve,
While this seems strange..(more below)
At 16:00 04/06/2009 -0500, Steve wrote:
snip
The absolute worst I've ever seen was *I think* an old Dell where there
was one, yes, one fan in the whole system that needed to cool
everything. They hung it on the wimpy power supply and
I wish to change the IP series I use on my home LAN.
Yes, I believe I know what this involves, but am willing to read alternate
thoughts.
For the past 2 yrs I have been using 192.168.x.x
I with to go back to 10.x.x.x.
I get way too much external FUTZ trying to get into 192.168.x.x. Perhaps I
It doesn't matter one bit. 192.x.x.x and 10.x.x.x are private only that
they are non-routable address ranges. That means by design, any packet with
a 10 or 192 header dropped on the internet will go nowhere. Which is why
everyone can use them in their internal LAN without needing to reserve
Actually that is the way I'd like to do it, with a distribution amp. My
old one was probably 20 years old and just not up to digital cable.
Anyways, mission accomplished on the network also. Plugged in CAT6
cables and both boxes are running at 1 gig. I like the fast transfer.
Also,
. Rain on my parade!
Thank you,
Duncan
__ NOD32 3990 (20090406) Information __
This message was checked by NOD32 antivirus system.
http://www.eset.com
deal at http://www.mjsales.net/. No connection other than
a satisfied customer.
Hope this help.
Jim Maki
jwm_maill...@comcast.net
__ NOD32 3990 (20090406) Information __
This message was checked by NOD32 antivirus system.
http://www.eset.com
__ NOD32 3990 (20090406) Information __
This message was checked by NOD32 antivirus system.
http://www.eset.com
.
Please. Rain on my parade!
Thank you,
Duncan
__ NOD32 3990 (20090406) Information __
This message was checked by NOD32 antivirus system.
http://www.eset.com
Well if no one knows of any that sync Contacts with Outlook, any
recommendations on good home phones based on the ones you guys have/have
used/read about? Pansonic seems to be the best from reading Amazon and
other sites, I'm just confused about which model to get unless someone has
heard
21 matches
Mail list logo
