Hello Everyone:
I am looking for some suggestions. We use Meditech Magic and we are trying to
interface with the Leica Cerebro system. We are trying to put the correct info
in the .hist section of Meditech so that Cerebro can pull the necessary info
for the labels.
My unsolved issue at the
Hi Everyone:We have issues with our requisitions not being filled in
specifically. I'm considering building a standardized Histo req for
Dermatology, Endo and the OR.Does anyone already have one in place that they
would like to share?
ThanksSheila
Hi Everyone:If anyone is using Mayers Haematoxylin progressively, can you
please share your HE protocol with me?Thanks:)Sheila
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
Hi Everyone:Can anyone reccommend a good way to ink esophageal biopsies without
using mercurochrome? ThanksSheila
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
Hi Everyone:
Can anyone tell me why some Alcian blue procedures say 30 min in Alcian Blue
and some say 10 min?Our control works well at 10 minutes but today I had a Dr.
say that he expected a small amount of cells to stain and they didn't in an
esophagus bx.So, now I'm wondering if b/c most of
Hi Everyone:I'm looking for opinions on cassette and slide labelling systems.
Please share your likes and dislikes.ThanksSheila
p.s Vendors Do Not call me over this email. That's very annoying
___
Histonet
We noticed for any tissues that have a tendency to float off:
Leave over night at room temp to air dryThe next day heat in a separate oven at
56 degrees for 15minAllow the slides to cool back down to room temp.Then stain
without using the oven on the stainer.Works great for fatty tissues
Of
Hello Everyone:
Does anyone use the RVG/1 tissue processor from Ideal?
Can you give me you opinions on this processor?
Thanks
Sheila
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
Hello:
Does anyone use the 2.5 gallon boxes of Deionized water? If so, can you send me
your vendor name?
We currently purchase the 5 gallon boxes and they are too heavy.
Thanks
___
Histonet mailing list
Hello:We are new Dako IHC users and we are experiencing an error with the
software telling us that the run is too complex.Dako says they are aware of the
software glitch but can't tell us what is causing it?Has anyone else
experienced this?ThanksSheila
Hi Everyone:
One of my pathologists wants me to look into Osmium Tetroxide for staining
lipids. From what I can gather on the internet, it looks like it is used in
Electron microscopy for fixation and staining.
Is anyone using this procedure for routine 4 micrometer sections?
Thanks
:)
Of Rene J Buesa
Sent: Friday, August 24, 2012 9:32 AM
To: Sheila Adey; histonet@lists.utsouthwestern.edu
Subject: Re: [Histonet] Osmium tetroxide staining for lipids
Osmium tetroxide is one of the most dangerous substances you can use in the
laboratory. Your pathologist probably read some article
Hello:We are looking for a new tissue processor. I've only ever used Sakura
products but the technology of the Leica ASP6025 looks like very good
technology.Has anyone used this processor? If so, can you give me your
opinion?Thanks :)Sheila
Hello Netters:
I am looking for some ideas regarding slide distribution amongst pathologists.
Currently one Dr. reads all the surgicals and one other reads the cytology and
bone marrows.
We now have 5 Dr.s and they are looking for ways to disperse the work evenly
per day.
Thanks
:)
Sheila
Hello:
I'm looking to purchase some gloves that are cut resistant during autopsy
cases.
Can anyone recommend a brand?
Thanks
Sheila
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
Hello netters:Does anyone have an example of a competency assessment form
designed for pathologists?Thanks in advance:)Sheila
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
Hello:Are any of the Meditech users having the pathologists order their levels
in the computer?We would like to implement this procedure. Any suggestions.
:)ThanksSheila
___
Histonet mailing list
Hello:Are any of the medi tech users having the OR order the pathology
specimens into the system before they arrive in the lab?:)Sheila
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
Hi Everyone:
I am looking for some opinions on the Pathos microwave processor.
Thanks
Sheila
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
As long as the specimen containers are being autoclaved or incinerated, there
will be nothing readable left of the labels.
From: thigg...@cddmedical.com
To: histonet@lists.utsouthwestern.edu
Date: Tue, 25 Oct 2011 08:28:04 -0500
Subject: [Histonet] DISPOSAL OF SPECIMENS
I have been in
You could buy some beef liver from the grocery store. Works great.
From: lpw...@sbcglobal.net
To: kjg...@gmail.com; histonet@lists.utsouthwestern.edu
Date: Sun, 23 Oct 2011 08:18:12 -0400
Subject: Re: [Histonet] Suggestions please...
CC:
Is there a slaughter house nearby? Call them,
Hello:
Can anyone tell me if they know how to assign QC's or Dr.s names to a batch of
cases? We have to go into each case to change a Dr.s name.
I'm also interested in assigning a QC number to a batch of cases with out
having to go into each case.
Thanks in advance.
Sheila
Hello:We are looking into purchasing a slide and cassette labeller system. Any
advice would be great. Also, if you know which system to stay away from, that
would be appreciated aswell.ThanksSheila
___
Histonet
Hello:
Is anyone using a computer system to have the OR submit their specimen requests
electronically? Also, I am interested in specimen tracking by having the
specimen scanned at the pick up point instead of using a paper log.
Any suggestions would be great
:)
Sheila
Hello netters,
Is anyone using a surgical pathology system called Picis???
Our OR is considering this system and we are wondering if it would benefit the
pathology side of things.
Any input is appreciated.
Thanks
:)
Sheila
Hello:
We currently change our processors every 5 runs.
I am thinking it would be more cost and time effective to count the number of
blocks before doing a change. If you count your blocks could you share with me
at what number you do a change. We run all types of tissues.
We use a gallon
Hello:
Has anyone used these prostate biopsy collection containers from Simport? It
looks like a petri dish and has 12 individual wells in it, each one labelled
with the location from the prostate.
We are going to trial them but I would like some opinions on them.
We currently get 10 to 12
Hello netters:
Looking for opinions on the Leica Bond immuno stainer please.
Thanks.
Sheila
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
I have a 60 yr old awesome tech in the grossing room. She is wonderful and is a
great teacher for the new younger techs. She works straight 9-5 everyday. I
value her experience and want to keep her work environment as accomodating as
possible. I also have a wonderful lady that only works in
I've never worked with goat knees, but we were experiencing lots of PIN4
prostate biopsies floating off during IHC staining with HEIR.
Since we started cutting the prostate bx's at 3 micons, huge difference. They
almost never float off. :)
Date: Mon, 16 May 2011 13:23:02 -0700
From:
Hello Everyone:
I am looking for a processing schedule for fatty specimens.
Could anyone share theirs?
Thanks in Advance.
:)
Sheila
Bluewater Health
___
Histonet mailing list
Hello Netters.
We are considering an Intelipath. I'd like some opinions on the instrument from
users out there.
Thanks in advance!!!
Sheila
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
Hi Diane,
We just purchased a cryostat from Sakura, we love it. Great features.
Date: Wed, 30 Mar 2011 06:38:41 -0700
From: dch...@yahoo.com
To: diane.glad...@us.army.mil; histonet@lists.utsouthwestern.edu
Subject: Re: [Histonet] Cryostat Feedback Needed (UNCLASSIFIED)
CC:
Hi Diane,
Hello,
Can anyone tell me if Dako still supports IHC's on the Artisan? If so, can it
do a Pin 4?
Thanks in advance.
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
Hello,
Is anyone using a compatible slide labeller and cassette labeller with Medi
tech?
We would like it to be interfaced.
Thanks in advance.
Sheila
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
Hello
We are looking to purchase a cassette and slide labeller system. We are located
in Sarnia Ontario Canada. Could reps for these items contact us at 519-464-4400
ext. 5277 ask for Sharon.
We would also love to hear other peoples opinions on which systems you
recommend.
Thanks.
Sheila
Hello everyone,
Usually our Twort's method for the Gram stain works great. But recently we
can't get the gram negatives to stain??? any ideas.
Thanks in advance
Sheila Adey HT
_
Win
Can anyone give me their opinions on the VIP 6?
Thanks in advance
Sheila Adey HT MLT Port Huron Hospital Michigan
_
Live connected with Messenger on your phone
http://go.microsoft.com
Hello,
Our pathologist said that he say HE slides with a counterstain that had some
amount of saffron in it?
Is anyone familiar with this?
Sheila Adey HT MLT
_
Stay in touch.
http
I'm looking for the Dako rep in South western Ontario, Cda.
Thanks.
Sheila Adey
_
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
Hi Everyone,
Has anyone ever heard of using Silver Nitrate for inking skin bx's before
processing???
One of our paths mentioned it.
Thanks in advance.
Sheila Adey HT MLT
Hello,
I've recently started working back in Canada and I am looking to find other
techs that are familiar with the OLA regulations for IHCs. Seems to be a little
different than the CAP guidelines.
Sheila Adey HT MLT
Does anyone have a good recipe for making up a dissect aid in house?
Sheila Adey HT MLT
_
New! Open Messenger faster on the MSN homepage
http://go.microsoft.com/?linkid=9677405___
Hello Netters,
Our lab is thinking about purchasing a Nemisis IHC stainer, any opinions about
this stainer???
Thanks in advance.
Sheila Adey HT MLT
_
Attention all humans. We are your photos. Free us.
http
We were having issues with placenta contamination aswell. Our Dr.s now wrap the
placenta sections in tissue paper and this seems to have cut down on the
problem.
Sheila Adey HT MLT Port Huron Hospital Michigan
Date: Fri, 1 May 2009 15:41:37 -0500
From: mpe...@grhs.net
To: mitchel
Could the Dako Rep for Port Huron Michigan give me a call?
810-987-5000 ext. 2128
Thanks
Sheila Adey HT MLT Port Huron Hospital Michigan
_
Chat with the whole group, and bring everyone together.
http://go.microsoft.com
Hi All,
We are short histo techs and are using aids to help more and more. Our manager
believes they can be doing the grossing of a histo tech as long as they have a
tech or Dr to consult with. Can someone remind me of the guide lines for
grossing. One has a BSc, is that enough?
Thanks in
We have an opening for a full time Histo tech at Port Huron Hospital in Port
Huron Michigan.
Sheila Adey HT MLT Port Huron Hospital Michigan
_
Drag n’ drop—Get easy photo sharing with Windows Live™ Photos.
http://www.microsoft.com
Do all the techs prime the packs prior to the first run?
Good luckSheila Adey HT MLT Port Huron Hospital Michigan Date: Fri, 19 Dec
2008 07:33:39 -0500 From: j...@cdc.gov To: dis...@shands.ufl.edu;
histonet@lists.utsouthwestern.edu Subject: RE: [Histonet] dako artisan gram
and afb CC: We
Hi All,
We have a casual histo tech position posted at our facility. If interested
please visit the Port Huron Hospital website for further information.
Sheila Adey HT MLT Port Huron Hospital Michigan
I can't believe so many people are not familiar with the term Casual it could
also be called contingent. Sheila Adey HT MLT Port Huron Hospital Michigan
Date: Tue, 2 Dec 2008 10:43:35 -0500 From: [EMAIL PROTECTED] To: [EMAIL
PROTECTED]; Histonet@lists.utsouthwestern.edu Subject: RE: [Histonet
Yes, this happened in our lab also. It was overnight and not 3 hours but it was
all gone in the AM. We weren't even allowed to keep the stir plate after that
one. Sheila Adey HT MLT Port Huron Hospital Michigan Date: Wed, 26 Nov 2008
14:03:23 -0500 From: [EMAIL PROTECTED] To: histonet
52 matches
Mail list logo