RE: [Histonet] Formalin smell in the last paraffin station in vip 6 tissue tek
Hi If the paraffin are overheated it gives abnormal odor. Recheck the paraffin bath temperature and the paraffin melting point then make sure to adjust the bath temperature at 2 degrees above the melting point. Please update me. Best Regards, Jamal M. Al Rowaihi Anatomic Pathology Supervisor | Al Borg Medical Laboratories | Mobile +966 503629832| j.rowa...@alborglaboratories.com Palestine St, Al Rajhi Building, P.O. Box 52817, Jeddah 21573, KSA| Phone: +966 12 670 0099 | Fax: +966 12 676 4984 | www.alborglaboratories.com -Original Message- From: histonet-boun...@lists.utsouthwestern.edu [mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Arun Jyothi S.P Sent: Tuesday, November 25, 2014 9:53 AM To: histonet@lists.utsouthwestern.edu Subject: [Histonet] Formalin smell in the last paraffin station in vip 6 tissue tek Dear all After processing in vip 6 the last paraffin has a strong odour of formalin Have anybody experienced the same Any ideas why it is happening. Arun Kuwait ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
[Histonet] fixative
Hello, I am considering the following fixatives for a high school histology experiment and I would appreciate any input considering safety, disposal, etc. 1- Ultrum II (American MasterTech): promotes disposal in local sewer? 2- Excell Plus (American MasterTech): low-hazard but any idea on disposal from those who use it? 3- Histochoice Tissue Fixative Anyone using these products/ advice is greatly appreciated! Ms. Adelle L. Schade, B.S., M.Ed. Anatomy and Physiology Conrad Weiser High School 44 Big Spring Rd. Robesonia, PA 19551 610-693-8599 x6736 a_sch...@conradweiser.org ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
Re: [Histonet] fixative
What are you going to accomplish? Alcohol will work as a fixative and dehydration solution. Less of a disposal issue. William DeSalvo william.desa...@sonoraquest.ccom 602-768-3692 Sent from my iPhone On Nov 25, 2014, at 8:30 AM, Schade, Adelle a_sch...@conradweiser.org wrote: Hello, I am considering the following fixatives for a high school histology experiment and I would appreciate any input considering safety, disposal, etc. 1- Ultrum II (American MasterTech): promotes disposal in local sewer? 2- Excell Plus (American MasterTech): low-hazard but any idea on disposal from those who use it? 3- Histochoice Tissue Fixative Anyone using these products/ advice is greatly appreciated! Ms. Adelle L. Schade, B.S., M.Ed. Anatomy and Physiology Conrad Weiser High School 44 Big Spring Rd. Robesonia, PA 19551 610-693-8599 x6736 a_sch...@conradweiser.org ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
Re: [Histonet] fixative
I think the best you should do is obtaining the MSDS for those fixatives and check their composition and disposal.René J. On Tuesday, November 25, 2014 10:30 AM, Schade, Adelle a_sch...@conradweiser.org wrote: Hello, I am considering the following fixatives for a high school histology experiment and I would appreciate any input considering safety, disposal, etc. 1- Ultrum II (American MasterTech): promotes disposal in local sewer? 2- Excell Plus (American MasterTech): low-hazard but any idea on disposal from those who use it? 3- Histochoice Tissue Fixative Anyone using these products/ advice is greatly appreciated! Ms. Adelle L. Schade, B.S., M.Ed. Anatomy and Physiology Conrad Weiser High School 44 Big Spring Rd. Robesonia, PA 19551 610-693-8599 x6736 a_sch...@conradweiser.org ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
RE: [EXTERNAL] Re: [Histonet] fixative
I agree that alcohol is also less toxic. What type of tissue are you fixing? -Original Message- From: histonet-boun...@lists.utsouthwestern.edu [mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of WILLIAM DESALVO Sent: Tuesday, November 25, 2014 10:46 AM To: Schade, Adelle Cc: histonet@lists.utsouthwestern.edu Subject: [EXTERNAL] Re: [Histonet] fixative What are you going to accomplish? Alcohol will work as a fixative and dehydration solution. Less of a disposal issue. William DeSalvo william.desa...@sonoraquest.ccom 602-768-3692 Sent from my iPhone On Nov 25, 2014, at 8:30 AM, Schade, Adelle a_sch...@conradweiser.org wrote: Hello, I am considering the following fixatives for a high school histology experiment and I would appreciate any input considering safety, disposal, etc. 1- Ultrum II (American MasterTech): promotes disposal in local sewer? 2- Excell Plus (American MasterTech): low-hazard but any idea on disposal from those who use it? 3- Histochoice Tissue Fixative Anyone using these products/ advice is greatly appreciated! Ms. Adelle L. Schade, B.S., M.Ed. Anatomy and Physiology Conrad Weiser High School 44 Big Spring Rd. Robesonia, PA 19551 610-693-8599 x6736 a_sch...@conradweiser.org ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
[Histonet] Kidney bx transport
We receive kidney biopsies brought directly to our grossing area within a few minutes after the cores are obtained. Previously, this was done by nephrologists, but since the renal biopsies are performed in radiology, the interventional radiologist brings them. We decide adequacy first, then apportion specimen to EM, IF and formalin. Similar to the protocol Tim has mentioned, our cores are received on saline-soaked pads in a petri dish. We transfer them to a slide wetted with saline to assess under light microscopy. It seems to come down to a decision of who wants to go where :) The IVR folks are willing to bring the biopsies to our laboratory - they get instant feedback, and often use the exchange for teaching purposes as we are a tertiary care academic centre. Another factor would be the location of microscope used for visualizing adequacy of the cores. The distance between the two locations is not huge, and there is always an MLT instantly available to assess the cores. Rarely has this system had hiccups. Occasionally, the adequacy is a question-mark, and we err on the side of asking IVR to obtain more tissue. This is usually delivered within 5-10 minutes after we request it. Hope this helps, Eric Gagnon MLT Histology Laboratory Kingston General Hospital Kingston, Ontario, Canada ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
RE: [EXTERNAL] Re: [Histonet] fixative
Some of our samples are from preserved specimen. We have a significant number of students that work/live on farms as well so from time to time we get a chick embryo that did not survive. Also, we have researched and would like to try some plant/seed histology processes. If alcohol will produce similar results without excessive dehydration that would be a great option for this setting. Thanks for the input Adelle -Original Message- From: Roy, Ryan [mailto:ryan@va.gov] Sent: Tuesday, November 25, 2014 11:49 AM To: 'WILLIAM DESALVO'; Schade, Adelle Cc: histonet@lists.utsouthwestern.edu Subject: RE: [EXTERNAL] Re: [Histonet] fixative I agree that alcohol is also less toxic. What type of tissue are you fixing? -Original Message- From: histonet-boun...@lists.utsouthwestern.edu [mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of WILLIAM DESALVO Sent: Tuesday, November 25, 2014 10:46 AM To: Schade, Adelle Cc: histonet@lists.utsouthwestern.edu Subject: [EXTERNAL] Re: [Histonet] fixative What are you going to accomplish? Alcohol will work as a fixative and dehydration solution. Less of a disposal issue. William DeSalvo william.desa...@sonoraquest.ccom 602-768-3692 Sent from my iPhone On Nov 25, 2014, at 8:30 AM, Schade, Adelle a_sch...@conradweiser.org wrote: Hello, I am considering the following fixatives for a high school histology experiment and I would appreciate any input considering safety, disposal, etc. 1- Ultrum II (American MasterTech): promotes disposal in local sewer? 2- Excell Plus (American MasterTech): low-hazard but any idea on disposal from those who use it? 3- Histochoice Tissue Fixative Anyone using these products/ advice is greatly appreciated! Ms. Adelle L. Schade, B.S., M.Ed. Anatomy and Physiology Conrad Weiser High School 44 Big Spring Rd. Robesonia, PA 19551 610-693-8599 x6736 a_sch...@conradweiser.org ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
RE: [Histonet] Formalin smell in the last paraffin station in vip 6 tissue tek
There may be a leaking valve. From: Jamal j.rowa...@alborglaboratories.com To: 'Arun Jyothi S.P' arunjyoth...@gmail.com, histonet@lists.utsouthwestern.edu Date: 11/25/2014 12:21 AM Subject:RE: [Histonet] Formalin smell in the last paraffin station in vip 6 tissue tek Sent by:histonet-boun...@lists.utsouthwestern.edu Hi If the paraffin are overheated it gives abnormal odor. Recheck the paraffin bath temperature and the paraffin melting point then make sure to adjust the bath temperature at 2 degrees above the melting point. Please update me. Best Regards, Jamal M. Al Rowaihi Anatomic Pathology Supervisor | Al Borg Medical Laboratories | Mobile +966 503629832| j.rowa...@alborglaboratories.com Palestine St, Al Rajhi Building, P.O. Box 52817, Jeddah 21573, KSA| Phone: +966 12 670 0099| Fax: +966 12 676 4984 | www.alborglaboratories.com -Original Message- From: histonet-boun...@lists.utsouthwestern.edu [ mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Arun Jyothi S.P Sent: Tuesday, November 25, 2014 9:53 AM To: histonet@lists.utsouthwestern.edu Subject: [Histonet] Formalin smell in the last paraffin station in vip 6 tissue tek Dear all After processing in vip 6 the last paraffin has a strong odour of formalin Have anybody experienced the same Any ideas why it is happening. Arun Kuwait ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
RE: [Histonet] Formalin smell in the last paraffin station in vip 6 tissue tek
Not sure if it's the same scenario, but this happened to us once about a dozen years ago on an older version of a VIP. Luckily, I haven't seen this again! One of our lab assistants loaded a basket of formalin-fixed tissues onto a processor that hadn't yet been through the clean cycle. The machine wouldn't let him start the process, so he took the basket out and put it back into formalin to wait while he ran the clean cycle. For that brief moment that the basket was in the retort, a bunch of residual formalin drained off the tissues and basket and mixed in with the residual molten paraffin that was left in the bottom of the retort. Anyway, after he ran the clean cycle he started the run as usual. 8 hours later, our blocks smelled like formalin when we cut them, and they were all mushy in texture. So Sakura told us that whenever you run the clean cycle, the VIP (again, it was a really old model and I'm not sure if the technology is still the same) will attempt to draw back into the last station that was used, any residual reagent that was left in the retort before proceeding to the next reagent. Since the last reagent had been paraffin, anything in the retort (including the newly mixed in formalin) went back into the last paraffin chamber on the VIP. As such, the next basket of tissues were infiltrated with formalin-infused paraffin in the very last processing step. If I recall, we had to reprocess almost all of those blocks. Hope this helps. Brian D. Cooper, HT (ASCP)CM | Histology Supervisor Department of Pathology and Laboratory Medicine Children's Hospital Los Angeles bcoo...@chla.usc.edu -Original Message- From: histonet-boun...@lists.utsouthwestern.edu [mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Arun Jyothi S.P Sent: Monday, November 24, 2014 10:53 PM To: histonet@lists.utsouthwestern.edu Subject: [Histonet] Formalin smell in the last paraffin station in vip 6 tissue tek Dear all After processing in vip 6 the last paraffin has a strong odour of formalin Have anybody experienced the same Any ideas why it is happening. Arun Kuwait ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet - CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential or legally privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of this original message. - ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
[Histonet] RE: HER2 scoring exercises for breast cases
Hi! I found the Leica Bond Oracle HER2 IHC e-Learning quite informative. You can find it at the bottom of the following page: http://www.leicabiosystems.com/ihc-ish/novocastra-reagents/theranostics/details/product/leica-oracle-her2-bond-ihc-system-2/ And if you're interested the Leica BOND HER2 FISH e-Learning course is good too. Joana Disclaimer: This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed. If you are not the intended recipient, any reading, printing, storage, disclosure, copying or any other action taken in respect of this e-mail is prohibited and may be unlawful. If you are not the intended recipient, please notify the sender immediately by using the reply function and then permanently delete what you have received. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Sidra Medical and Research Center. ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
[Histonet] RE: Kidney bx transport
Try a cell culture solution like Hanks. It preserves better than normal saline (which despite its name is not isotonic with cells). It will keep a renal and skin biopsy quite well for at least an hour. Regards Tony Henwood JP, MSc, BAppSc, GradDipSysAnalys, CT(ASC), FFSc(RCPA) Laboratory Manager Senior Scientist, the Children's Hospital at Westmead Adjunct Fellow, School of Medicine, University of Western Sydney Tel: 612 9845 3306 Fax: 612 9845 3318 Pathology Department the children's hospital at westmead Cnr Hawkesbury Road and Hainsworth Street, Westmead Locked Bag 4001, Westmead NSW 2145, AUSTRALIA -Original Message- From: histonet-boun...@lists.utsouthwestern.edu [mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Gagnon, Eric Sent: Wednesday, 26 November 2014 3:53 AM To: histonet@lists.utsouthwestern.edu Subject: [Histonet] Kidney bx transport We receive kidney biopsies brought directly to our grossing area within a few minutes after the cores are obtained. Previously, this was done by nephrologists, but since the renal biopsies are performed in radiology, the interventional radiologist brings them. We decide adequacy first, then apportion specimen to EM, IF and formalin. Similar to the protocol Tim has mentioned, our cores are received on saline-soaked pads in a petri dish. We transfer them to a slide wetted with saline to assess under light microscopy. It seems to come down to a decision of who wants to go where :) The IVR folks are willing to bring the biopsies to our laboratory - they get instant feedback, and often use the exchange for teaching purposes as we are a tertiary care academic centre. Another factor would be the location of microscope used for visualizing adequacy of the cores. The distance between the two locations is not huge, and there is always an MLT instantly available to assess the cores. Rarely has this system had hiccups. Occasionally, the adequacy is a question-mark, and we err on the side of asking IVR to obtain more tissue. This is usually delivered within 5-10 minutes after we request it. Hope this helps, Eric Gagnon MLT Histology Laboratory Kingston General Hospital Kingston, Ontario, Canada ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet * This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient, please delete it and notify the sender. Views expressed in this message and any attachments are those of the individual sender, and are not necessarily the views of The Sydney Children's Hospitals Network. This note also confirms that this email message has been virus scanned and although no computer viruses were detected, The Sydney Childrens Hospital's Network accepts no liability for any consequential damage resulting from email containing computer viruses. * ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
RE: [Histonet] Formalin smell in the last paraffin station in vip 6 tissue tek
Also check the last alcohol and xylene. Has someone accidentally replaced these solution with formalin by mistake? Regards Tony Henwood JP, MSc, BAppSc, GradDipSysAnalys, CT(ASC), FFSc(RCPA) Laboratory Manager Senior Scientist, the Children’s Hospital at Westmead Adjunct Fellow, School of Medicine, University of Western Sydney Tel: 612 9845 3306 Fax: 612 9845 3318 Pathology Department the children's hospital at westmead Cnr Hawkesbury Road and Hainsworth Street, Westmead Locked Bag 4001, Westmead NSW 2145, AUSTRALIA -Original Message- From: histonet-boun...@lists.utsouthwestern.edu [mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Cooper, Brian Sent: Wednesday, 26 November 2014 5:17 AM To: Arun Jyothi S.P; histonet@lists.utsouthwestern.edu Subject: RE: [Histonet] Formalin smell in the last paraffin station in vip 6 tissue tek Not sure if it's the same scenario, but this happened to us once about a dozen years ago on an older version of a VIP. Luckily, I haven't seen this again! One of our lab assistants loaded a basket of formalin-fixed tissues onto a processor that hadn't yet been through the clean cycle. The machine wouldn't let him start the process, so he took the basket out and put it back into formalin to wait while he ran the clean cycle. For that brief moment that the basket was in the retort, a bunch of residual formalin drained off the tissues and basket and mixed in with the residual molten paraffin that was left in the bottom of the retort. Anyway, after he ran the clean cycle he started the run as usual. 8 hours later, our blocks smelled like formalin when we cut them, and they were all mushy in texture. So Sakura told us that whenever you run the clean cycle, the VIP (again, it was a really old model and I'm not sure if the technology is still the same) will attempt to draw back into the last station that was used, any residual reagent that was left in the retort before proceeding to the next reagent. Since the last reagent had been paraffin, anything in the retort (including the newly mixed in formalin) went back into the last paraffin chamber on the VIP. As such, the next basket of tissues were infiltrated with formalin-infused paraffin in the very last processing step. If I recall, we had to reprocess almost all of those blocks. Hope this helps. Brian D. Cooper, HT (ASCP)CM | Histology Supervisor Department of Pathology and Laboratory Medicine Children's Hospital Los Angeles bcoo...@chla.usc.edu -Original Message- From: histonet-boun...@lists.utsouthwestern.edu [mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Arun Jyothi S.P Sent: Monday, November 24, 2014 10:53 PM To: histonet@lists.utsouthwestern.edu Subject: [Histonet] Formalin smell in the last paraffin station in vip 6 tissue tek Dear all After processing in vip 6 the last paraffin has a strong odour of formalin Have anybody experienced the same Any ideas why it is happening. Arun Kuwait ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet - CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential or legally privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of this original message. - * This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient, please delete it and notify the sender. Views expressed in this message and any attachments are those of the individual sender, and are not necessarily the views of The Sydney Children's Hospitals Network. This note also confirms that this email message has been virus scanned and although no computer viruses were detected, The Sydney Childrens Hospital's Network accepts no liability for any consequential damage resulting from email containing computer viruses. * ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet
RE: [Histonet] Formalin smell in the last paraffin station in vip 6 tissue tek
Dear all We find the problem The retort was over heating and thats y the condensation also very high When the condensation chamber is full its pumping back the reagent in the condensation chamber to the retort and mixing it with paraffin Thanks for all the support On 26 Nov 2014 02:39, Tony Henwood (SCHN) tony.henw...@health.nsw.gov.au wrote: Also check the last alcohol and xylene. Has someone accidentally replaced these solution with formalin by mistake? Regards Tony Henwood JP, MSc, BAppSc, GradDipSysAnalys, CT(ASC), FFSc(RCPA) Laboratory Manager Senior Scientist, the Children’s Hospital at Westmead Adjunct Fellow, School of Medicine, University of Western Sydney Tel: 612 9845 3306 Fax: 612 9845 3318 Pathology Department the children's hospital at westmead Cnr Hawkesbury Road and Hainsworth Street, Westmead Locked Bag 4001, Westmead NSW 2145, AUSTRALIA -Original Message- From: histonet-boun...@lists.utsouthwestern.edu [mailto: histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Cooper, Brian Sent: Wednesday, 26 November 2014 5:17 AM To: Arun Jyothi S.P; histonet@lists.utsouthwestern.edu Subject: RE: [Histonet] Formalin smell in the last paraffin station in vip 6 tissue tek Not sure if it's the same scenario, but this happened to us once about a dozen years ago on an older version of a VIP. Luckily, I haven't seen this again! One of our lab assistants loaded a basket of formalin-fixed tissues onto a processor that hadn't yet been through the clean cycle. The machine wouldn't let him start the process, so he took the basket out and put it back into formalin to wait while he ran the clean cycle. For that brief moment that the basket was in the retort, a bunch of residual formalin drained off the tissues and basket and mixed in with the residual molten paraffin that was left in the bottom of the retort. Anyway, after he ran the clean cycle he started the run as usual. 8 hours later, our blocks smelled like formalin when we cut them, and they were all mushy in texture. So Sakura told us that whenever you run the clean cycle, the VIP (again, it was a really old model and I'm not sure if the technology is still the same) will attempt to draw back into the last station that was used, any residual reagent that was left in the retort before proceeding to the next reagent. Since the last reagent had been paraffin, anything in the retort (including the newly mixed in formalin) went back into the last paraffin chamber on the VIP. As such, the next basket of tissues were infiltrated with formalin-infused paraffin in the very last processing step. If I recall, we had to reprocess almost all of those blocks. Hope this helps. Brian D. Cooper, HT (ASCP)CM | Histology Supervisor Department of Pathology and Laboratory Medicine Children's Hospital Los Angeles bcoo...@chla.usc.edu -Original Message- From: histonet-boun...@lists.utsouthwestern.edu [mailto: histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Arun Jyothi S.P Sent: Monday, November 24, 2014 10:53 PM To: histonet@lists.utsouthwestern.edu Subject: [Histonet] Formalin smell in the last paraffin station in vip 6 tissue tek Dear all After processing in vip 6 the last paraffin has a strong odour of formalin Have anybody experienced the same Any ideas why it is happening. Arun Kuwait ___ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet - CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential or legally privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of this original message. - * This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient, please delete it and notify the sender. Views expressed in this message and any attachments are those of the individual sender, and are not necessarily the views of The Sydney Children's Hospitals Network. This note also confirms that this email message has been virus scanned and although no computer viruses were detected, The Sydney Childrens Hospital's Network accepts no liability for any consequential damage resulting from email containing computer viruses. * ___ Histonet mailing list