Ed,
Congrats! I do not care if we are first, but I would like a z10, BC or
EC sometime in the near future! :-)
As an aside, any rumblings on when the z11 is due out?
Bob
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Edward Jaffe
Sent:
They are all in the USA. We don't perform consulting jobs outside the US
any more although we do have software clients all over the world. The
MVS/SP conversion was pretty unusual, even for me, but not the largest?
change recently. I migrated a site off of a 360 to a z/890 last year. They
were
Peter Relson wrote:
Q:
1. HZSPDATA
I allocated the dataset using HZSAIEOF program, however it seems to be
empty. What does HZSAIEOF do? Can I use IEFBR14 instead?
A: Are you opposed for some reason to following instructions? Please use
what is provided. I will not answer either of the two
I solved the problem by turning on console autoinstall.
Thanks
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Brian Westerman
Sent: Saturday, December 06, 2008 1:56 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: TSSO issuing command to CICS
It
We are using IBM Debug Tool V8 (current maintenance) for batch (actually TSO
foreground), CICS/TS 2.3 and 3.2. There seems to be a lot of issues with the
product (abends, lost settings and breakpoints, funny screens, etc.). Is
it just me?
Paul P
On Fri, 5 Dec 2008 23:17:30 -0600, John McKown [EMAIL PROTECTED]
wrote:
From speaking with some i people on a forum similar to this one, the i is
a really good platform (unlike Wintel!) for a company our size. And one
which requires much less technical support. I guess that sometimes choice
is
Lutz Hamann wrote:
But what do you mean by 'new cool' HMC-layout ? Tree-style of HMC 2.9.2
or above ?
Yes, tree mode as opposed to classic mode. This is the first I've
seen of the tree mode. If it was available on our old z9 HMC, nobody
ever enabled it.
One can still use classic mode
We use 2 HMC's here on our z9 EC. One with icon- (for migration purposes)
and the other with tree-style.
Honestly spoken: I like tree-style more and I'm sure that next year I'll
change our second HMC to it too.
ciao Lutz
On Mon, 8 Dec 2008 15:57:17 +0100, Thomas Berg wrote:
AFAICS, IANAL, etc but this (that they can block reading Your
own data) should require that they have a valid patent for the
data format (copy right is not sufficient, I think) and that one
must be too old (?).
It depends on who has the more
Ed,
I wonder have you turned on 'HIPERDISPATCH=YES' and what the performance
looks like with this option?
We are also going to have a z10-BC soon, but haven't decided yet to turn
on.
Because lots of pros and cons out there. We have 3 LPARs; one production
and two tiny tests.
John Kim.
-Ursprungligt meddelande-
Från: IBM Mainframe Discussion List
[mailto:[EMAIL PROTECTED] För Paul Gilmartin
Skickat: den 8 december 2008 16:14
Till: IBM-MAIN@bama.ua.edu
Ämne: Patent (was: Can you read CA-Librarian ...)
On Mon, 8 Dec 2008 15:57:17 +0100, Thomas Berg wrote:
On Sat, 6 Dec 2008 11:00:15 -0600, Rick Fochtman [EMAIL PROTECTED]
wrote:
Mike, if RMM would do either of two things, you would make room for
independant developers to create some better reporting mechanisms.
1. Make the data formats public
OR
2. Provide an offload utility, similar in
John Kim wrote:
Ed,
I wonder have you turned on 'HIPERDISPATCH=YES' and what the performance
looks like with this option?
Funny you mention that. Yesterday, I logged on and noticed the following:
IEAVEH071E HiperDispatch is expected to be enabled but it is disabled
So, I added
Paul Gilmartin wrote:
On Mon, 8 Dec 2008 15:57:17 +0100, Thomas Berg wrote:
AFAICS, IANAL, etc but this (that they can block reading Your
own data) should require that they have a valid patent for the
data format (copy right is not sufficient, I think) and that one
must be too old (?).
It
I am trying to setup my EMK Profile for JAVA. I keep getting errors on teh
Audit. statements. Mostly FSUM7351 not Found.
Java is mounted (J1.5), EKM paths are mounted. Not sure what is missing.
Has someone already set this up and would share their insights of how to config
JAVA for EKM?
This is from the Filezilla web site concerning the issue with 3.1.0.1 and
various FTP TLS servers.
This was sent to me by another person on the list a few months ago and
describes the issue.
Steve Bireley
BlueZone Software
http://trac.filezilla-project.org/ticket/3626
Also 2008-07-24 -
It's one thing to threaten a lawsuit against someone
reverse engineering the proprietary format for commercial
purposes, but to hold data hostage from its rightful owner
is outrageous.
Would anybody do business with these sharks if they
knew this ahead of time? I think not.
Date:
We are soon at the end of a decommissioning project (very, very sad).
Our hardware maintenance contract (z800, Shark, and ATL/VTS) expires
2/1/09, but we may not be able to decommission until a few months after that.
Does anyone have ideas on ballpark figures on costs associated with
hardware
According to '2008 No.4 Sheryl Watson's Tuning letter' the performance
benefit is expected the range of 0 to 10%. Our shop will have a 3-way
z10-BC, and three z/OS images are small enough fit in a book, and our
shop is heavily batch run will be falling at the low-end of the range.
The following
That might have been me :), anyway I found the same info. I guess the
question is:
Is IBM's answer to implement AT-TLS via Policy Agent sufficient? Or
should we be more insistent that they fix the FTPD server?
Are there others out there running into this issue.
Is this concern more
I don't know for sure. I've always heard that time and materials
was at least $250/hour, two hour minimum, and low in priority behind
customers paying maintenance.
We did run some old 3590 drives for several months after we dropped
maintenance. I think 2 or 3 of the 8 had failed before we
Richards, Robert B. wrote:
As an aside, any rumblings on when the z11 is due out?
No rumblings that I've heard or can share. From a historical
perspective, we installed our z800 in 2002, skipped z890, installed our
z9 BC in 2006, and now a z10 BC in 2008. It seems that there's a new
On Mon, 8 Dec 2008 11:23:59 -0500, Lizette Koehler [EMAIL PROTECTED]
wrote:
I am trying to setup my EMK Profile for JAVA. I keep getting errors on teh
Audit. statements. Mostly FSUM7351 not Found.
Java is mounted (J1.5), EKM paths are mounted. Not sure what is missing.
As always, seeing the
If you have an initiator set to CLASS=AP, JES2 will select the highest
priority, non-held CLASS=A job for execution. Only when the CLASS=A
queue is empty will JES2 then start looking for the highest priority
non-held
job in the CLASS=P queue.
/jack
- Original Message -
From: John
If you let the service lapse on the equipment you have now, for the
equipment to be sold, or put back on maintenance, there could be a
charge to recertify the equipment to be eligible to go back on a
maintenance contract.
-Original Message-
From: IBM Mainframe Discussion List
Hello,
Can anyone tell me what I'm missing on the JCL below. Job keeps asking for a
space parameter.
//STEP1 EXEC PGM=IDCAMS
//SYSPRINT DD SYSOUT=*
//RECEIVE DD DSNAME=E18823.TDB.SYSPROG.SYMD.CAVHPROT.CLUS,
//
Hi,
OA2729 is a very interesting APAR and one that early adopters of z/OS 1.10
probably want to be aware of. DIAGxx option NUCLABEL ENABLE|DISABLE(IGVGPVTN)
provides an immediate option for relief.
Best Regards,
Sam Knutson, GEICO
System z
2008/12/8 Peggy Andrews [EMAIL PROTECTED]:
We are soon at the end of a decommissioning project (very, very sad).
Our hardware maintenance contract (z800, Shark, and ATL/VTS) expires
2/1/09, but we may not be able to decommission until a few months after that.
Does anyone have ideas on
On Sat, 6 Dec 2008 20:13:19 -0600, Tony Harminc
[EMAIL PROTECTED] wrote:
...
It seems odd to me to go down the path of ill-tested SNMP or
emails from the service processor, when there is a much more
robust and *architected* mechanism already there. ...
...
I couldn't agree more. I'm in favor
Folks
I have been on this list a little while and I find it's not
quite what I was looking for.
Can anyone recommend a list for programmers under zOS,
preferably assembler programming.
regards
mIke
--
Mike Munro MBCS,CITP_[EMAIL PROTECTED]
Ornum Software Ltd (S) Tel/Fax:+44(0)7041 363
On Mon, 8 Dec 2008 08:37:59 -0600, Paul Peplinski
[EMAIL PROTECTED] wrote:
We are using IBM Debug Tool V8 (current maintenance) for batch (actually
TSO
foreground), CICS/TS 2.3 and 3.2. There seems to be a lot of issues with the
product (abends, lost settings and breakpoints, funny screens,
I've been hearing alot about z/Linux and am wondering what are some good
references for learning. Basically, I'm looking for a z/Linux for dummies
book.
Any help will be greatly appreciated.
TIA
--
For IBM-MAIN subscribe /
The z10 BC with its single drawer and L2 will get minimal benefit, if
any, from HiperDispatch. z10 EC with more books is different of
course.
It is turned off by default because many mainframe customer don't like
changes without their control.
Marian Gasparovic
IBM Slovakia
On Mon, Dec 8, 2008
2) The majority of installations that bring in a z10 are not turning on
I did not know that. Where did you hear that? Cheryl's newsletter?
Another source?
The LSPR numbers are with HIPERDISPATCH=ON. We already have trouble
getting out of the box what zPCR tells us to expect (no surprise,
On Mon, 8 Dec 2008 16:46:15 -0600, Mark Zelden [EMAIL PROTECTED] wrote:
2) The majority of installations that bring in a z10 are not turning on
I did not know that. Where did you hear that? Cheryl's newsletter?
Another source?
The LSPR numbers are with HIPERDISPATCH=ON. We already have
Folks
I have been on this list a little while, but it turns out to be not quite what
I
need.
Can anyone recommend a list for programming under zOS, preferably for
assembler programmers.
regards
Mike
--
Mike Munro MBCS,CITP_[EMAIL PROTECTED]
Ornum Software Ltd (S) Tel:+44(0)7041 363 070
Hi Howard,
Is there a data class for this SMS controlled dataset? If not, or if the
dataset is not SMS controlled, you will need to specify space.
Linda Mooney
-- Original message --
From: Howard Rifkind [EMAIL PROTECTED]
Hello,
Can anyone tell me what I'm
It is very hard for me to read the posting you sent. However, having
just had a similar situation, you might want to check your DSN against
your ACS rules.
I was attempting to write to tape, but I had a qualifier that was
reserved by SMS to go to DASD - IT OVERRODE the UNIT info.
So you may be
It's from Cheryl's newsletter. I am waiting for your empirical testing
or any resulted experiments to turn around my confidence-level.
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Edward Jaffe
Sent: Monday, December 08, 2008 1:00 PM
To:
Michael,
Try
http://www.lsoft.com/scripts/wl.exe?SL1=ASSEMBLER-LISTH=LISTSERV.UGA.EDU
on for size.
Michael Munro wrote:
Folks
I have been on this list a little while and I find it's not
quite what I was looking for.
Can anyone recommend a list for programmers under zOS,
preferably
Michael Munro wrote:
Can anyone recommend a list for programmers under zOS,
preferably assembler programming.
[EMAIL PROTECTED]
--
Edward E Jaffe
Phoenix Software International, Inc
5200 W Century Blvd, Suite 800
Los Angeles, CA 90045
310-338-0400 x318
[EMAIL PROTECTED]
The fix to this APAR will restore the pre-release 1.10 behavior
as the default to prevent impact to the unsuspecting program
or user. A new DIAGxx trap will be documented by which
those environments which will benefit from the new means of
allocating storage for user private subpools can
I suspect your ACS routines are intercepting the allocation for
TDB.SYSPROG.SYMD.CAVHPROT.CLUS and is attempting to write it to DASD.
From: IBM Mainframe Discussion List [EMAIL PROTECTED] On Behalf Of Howard
Rifkind [EMAIL PROTECTED]
Sent: Monday,
[EMAIL PROTECTED]
Jay Campbell
IBM OS Support Section
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Michael Munro
Sent: Monday, December 08, 2008 3:55 PM
To: IBM-MAIN@bama.ua.edu
Subject: Assembler programmers list
Folks
I have been on
What is the device type for the device numbers assigned to the esoteric - HCRT?
Check in your current EDT.
HITACHI
DATA SYSTEMS
Raymond E. Noal
Senior Technical Engineer
Office: (408) 970 - 7978
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Howard,
Does this data set exist? TDB.SYSPROG.SYMD.CAVHPROT.CLUS
Lizette.
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of
Howard Rifkind
Sent: Monday, December 08, 2008 3:29 PM
To: IBM-MAIN@bama.ua.edu
Subject: Tape Space Issue
Ooh so many things to read
This might be a good start:
Linux for IBM System z9 and IBM zSeries
http://www.redbooks.ibm.com/abstracts/sg246694.html
Other Linux for System z and z/VM Redbooks are listed on the z/VM web site with a link
toward the bottom here:
http://www.vm.ibm.com/
Check your SMS parameters. Is this output dataset being converted to a
DASD file by SMS ??
Howard Rifkind wrote:
Hello,
Can anyone tell me what I'm missing on the JCL below. Job keeps asking for a
space parameter.
//STEP1 EXEC PGM=IDCAMS
//SYSPRINT DD
On Mon, 8 Dec 2008, Michael Munro wrote:
Folks
I have been on this list a little while and I find it's not
quite what I was looking for.
Can anyone recommend a list for programmers under zOS,
preferably assembler programming.
regards
mIke
Have I got the list for you! ASSEMBLER-LIST
On Mon, 8 Dec 2008, gsg wrote:
I've been hearing alot about z/Linux and am wondering what are some good
references for learning. Basically, I'm looking for a z/Linux for dummies
book.
Any help will be greatly appreciated.
TIA
Try this web site for a starter http://linuxvm.org
A couple of starting points:
The Linux on z mailing list [EMAIL PROTECTED]
The website http://www.linuxvm.org
IBM Redbooks on Linux on z (a link to a list of them can be found at the
above site.)
===
Wayne Driscoll
OMEGAMON DB2 L3 Support/Development
I have been doing RTFM on Jes Init Tune Guide and find myself
back in a quandry. My original purpose was to get an ever changing list
of, overnight batch, critical path,jobs priority access to initiators
without changing their JCL manually. But here is what I read in the Guide
about
BTW: Debug V9 is IPLA only, where Debug V8 was MLC.
If you have the licensed the IPLA add-on product Debug Tool Utils AF V8
(5655-S16) then the SS on that allows you to add Debug V9 without
additional OTC. If you don't have that product, you'll need to pay the OTC.
There is a good side, If you
53 matches
Mail list logo
