The query shows there is only 1 active backup task. We think we've figured
out what is happening. We have INUSE(RETRY(Y) DELAY(0) SERIALIZATION
(PREFERRED) coded so HSM was allocating a second drive to back up datasets
that were in use after the initial backup task completed.
The other
Visnson,
When you have MAXBACKUPTASKS=01, and you are seeing multiple drives
mounted, what does a Q AC display show as active tasks.
On Fri, 17 Apr 2009 10:45:28 -0700, Vinson Lee v...@sdccd.edu wrote:
Here is a portion of the Q Setsys output:
ARC0638I MAXDUMPTASKS=01, ADSTART=(
) using 2 drives
At 15:49 -0400 on 04/16/2009, O'Brien, David W. (NIH/CIT) [C] wrote
about Re: DFHSM MAXBACKUPTASKS(1) using 2 drives:
Er Jay, We're talking about tape drives here.
1 Backup Task should have 1 DASD unit as input and 1 Tape unit as output.
The OP specified Duplexing was turned off
not occur.
-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf
Of O'Brien, David W. (NIH/CIT) [C]
Sent: Friday, April 17, 2009 1:58 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: DFHSM MAXBACKUPTASKS(1) using 2 drives
Robert,
No, I don't think I'm
Contractor
From: IBM Mainframe Discussion List [ibm-m...@bama.ua.edu] On Behalf Of Vinson
Lee [v...@sdccd.edu]
Sent: Friday, April 17, 2009 12:20 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: DFHSM MAXBACKUPTASKS(1) using 2 drives
Unfortunately, we're still running z
?
Dave O'Brien
NIH Contractor
From: IBM Mainframe Discussion List [ibm-m...@bama.ua.edu] On Behalf Of
Vinson Lee [v...@sdccd.edu]
Sent: Friday, April 17, 2009 12:20 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: DFHSM MAXBACKUPTASKS(1) using 2 drives
17, 2009 9:21 AM
To: IBM-MAIN@bama.ua.edu
Subject: Re: DFHSM MAXBACKUPTASKS(1) using 2 drives
Unfortunately, we're still running z/OS 1.7, so IBM will not allow us
to open
a PMR for this issue. We are a small shop and do not have a lot of
tape
drives available and are trying to minimize
OS- z/OS 1.7 put RSU0809
DFHSM SETSYS MAXBACKUPTASKS(1) and DUPLEX BACKUP(N)
When AUTOBACKUPSTART DFHSM is allocating two tape drives. Even though
the Setsys is set to MAXBACKUPTASK (1).
Any ideas why?
Thanks, Jaime
...@bama.ua.edu] On
Behalf Of Jaime Miranda
Sent: Thursday, April 16, 2009 1:43 PM
To: IBM-MAIN@bama.ua.edu
Subject: [IBM-MAIN] DFHSM MAXBACKUPTASKS(1) using 2 drives
OS- z/OS 1.7 put RSU0809
DFHSM SETSYS MAXBACKUPTASKS(1) and DUPLEX BACKUP(N)
When AUTOBACKUPSTART DFHSM is allocating two tape drives
: [IBM-MAIN] DFHSM MAXBACKUPTASKS(1) using 2 drives
Not according to the manual:
Explanation: MAXBACKUPTASKS(nn) is an optional parameter specifying the
maximum number of volume backup tasks DFSMShsm can concurrently process.
For nn, substitute a decimal number from 1 to 15 to represent the number
: DFHSM MAXBACKUPTASKS(1) using 2 drives
Not according to the manual:
Explanation: MAXBACKUPTASKS(nn) is an optional parameter specifying the
maximum number of volume backup tasks DFSMShsm can concurrently process.
For nn, substitute a decimal number from 1 to 15 to represent the number
of volume
] On Behalf Of
Campbell Jay [james.l.campb...@irs.gov]
Sent: Thursday, April 16, 2009 3:38 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: DFHSM MAXBACKUPTASKS(1) using 2 drives
1 task - 1 input - 1 output - 2 drives
Jay Campbell
IBM OS Support Section
-Original Message-
From: IBM Mainframe
...@sdccd.edu]
Sent: Thursday, April 16, 2009 11:43 AM
To: IBM-MAIN@bama.ua.edu
Subject: DFHSM MAXBACKUPTASKS(1) using 2 drives
OS- z/OS 1.7 put RSU0809
DFHSM SETSYS MAXBACKUPTASKS(1) and DUPLEX BACKUP(N)
When AUTOBACKUPSTART DFHSM is allocating two tape drives. Even though
the Setsys is set
Barry,
The Setsys DSBACKUP (TAPE (TASKS (1)) and backup is a DASD incremental
Backup.
Thanks,Jaime
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the
, 2009 1:43 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: DFHSM MAXBACKUPTASKS(1) using 2 drives
Barry,
The Setsys DSBACKUP (TAPE (TASKS (1)) and backup is a DASD incremental
Backup.
Thanks,Jaime
--
For IBM-MAIN subscribe
check:
1. duplexing of tape
2. ARCCMD member for HSM activities at that time
3. any ONLYIF HSMHOST() employed in the ARCCMD
4. ARCINBAK being used by any jobs at that time
- ravi.
On Thu, 16 Apr 2009 15:43:10 -0500, Jaime Miranda jamir...@sdccd.edu wrote:
Barry,
The Setsys DSBACKUP (TAPE
Terry,
Setsys for CDSVERSIONBACKUP
SETSYS CDSVERSIONBACKUP(BACKUPCOPIES(4)
BACKUPDEVICECATEGORY(DASD)
DATAMOVER(DSS))
Thanks, Jaime
--
For IBM-MAIN subscribe / signoff / archive access
At 15:49 -0400 on 04/16/2009, O'Brien, David W. (NIH/CIT) [C] wrote
about Re: DFHSM MAXBACKUPTASKS(1) using 2 drives:
Er Jay, We're talking about tape drives here.
1 Backup Task should have 1 DASD unit as input and 1 Tape unit as output.
The OP specified Duplexing was turned off.
Dave
18 matches
Mail list logo