on the OSA's configuration.
Thank you again.
Best regards,
Toyokazu Kobayashi
- Original Message -
From: "Alan Altmark"
Newsgroups: bit.listserv.ibm-main
To:
Sent: Saturday, September 11, 2021 10:47 PM
Subject: Re: OSA Physical ethernet ports
On Fri, 10 Sep 2021 17:3
On Fri, 10 Sep 2021 17:36:37 +0900, (K.K.Paradox)T.Kobayashi
wrote:
>1) Is the port set in OAT a OSA Physical port?
Yes. If the PCHID has two ports, then you specify port 0 or 1 in the OAT. But
be careful. On a z9, I think you have OSA-Express2. All of the PCHIDs are
single port. There
Discussion List on behalf of
Tony Thigpen
Sent: 10 September 2021 17:12
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: OSA Physical ethernet ports
P H,
z10 was generation before z114. It only supports the old/bigger cards.
The large format OSAs came in four physical port layouts:
1 port at top (1
@LISTSERV.UA.EDU
Subject: OSA Physical ethernet ports
Hello,
I planing to configure z/OS's native TCP/IP on z10-BC machine.
IOCP DECK is shown at the end of this mail.
The OSA-ICC 3270 sessions are currently configured.
OSE CHPID is defined, but nothing else is configured.
I understand that OSE (Non
Guide (bit dated
now)
3. IBM System z Connectivity Handbook
Regards
Parwez Hamid​
From: IBM Mainframe Discussion List on behalf of
(K.K.Paradox)T.Kobayashi
Sent: 10 September 2021 09:36
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: OSA Physical ethernet ports
Hello
, but nothing else is configured.
I understand that OSE (Non-QDIO mode) requires UA and port, IP addr,
mapping
in OAT.
Also, OAT and z/OS TCPIP PROFILE (DEVICE and LINK) setting will mapping.
But, I don't understand how to assgin the OSA Physical ethernet ports.
Qeustions:
1) Is the port set in OAT
,
mapping
in OAT.
Also, OAT and z/OS TCPIP PROFILE (DEVICE and LINK) setting will mapping.
But, I don't understand how to assgin the OSA Physical ethernet ports.
Qeustions:
1) Is the port set in OAT a OSA Physical port?
2) Can OSA-ICC 3270 sessions and OSE ports share a OSA Physical port?
Should
configured.
OSE CHPID is defined, but nothing else is configured.
I understand that OSE (Non-QDIO mode) requires UA and port, IP addr,
mapping
in OAT.
Also, OAT and z/OS TCPIP PROFILE (DEVICE and LINK) setting will mapping.
But, I don't understand how to assgin the OSA Physical ethernet ports
, mapping
in OAT.
Also, OAT and z/OS TCPIP PROFILE (DEVICE and LINK) setting will mapping.
But, I don't understand how to assgin the OSA Physical ethernet ports.
Qeustions:
1) Is the port set in OAT a OSA Physical port?
2) Can OSA-ICC 3270 sessions and OSE ports share a OSA Physical port?
Should