ify the task that spawned the BPXAS task and cancel it.
>
>D OMVS,A=ALL I think is the command you can start with.
>
>Lizette
>
>
>> -Original Message-
>> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
>> Behalf Of Nai, Dean
>>
>Hi,
Does anyone know how to cancel a running BPXAS? I tried cancel bpxas,a=
and that didn't work.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with
Has anyone else run into these abends for OMVS jobs? There is an APAR out there
that recognizes the issue but has no solution.
What seems to be happening is we have a Websphere running in one of the BPAXS
and it gets recycled everyday by canceling it because it won't come down clean
because of
this address space as
unusable?
On 7/5/17, 11:02 AM, "IBM Mainframe Discussion List on behalf of Nai, Dean"
<IBM-MAIN@LISTSERV.UA.EDU on behalf of dean@doit.nh.gov> wrote:
>That identifies it as TCPIP which we got from the error messages and dumps.
>But seeing it
Thanks David.
Dean Nai
Senior z/OS Systems Programmer
Mainframe Technical Support Group
Department of Information Technology
State of New Hampshire
27 Hazen Drive
Concord, NH 03301
work: 603-271-1529
Statement of Confidentiality: The contents of this message are
confidential.
That identifies it as TCPIP which we got from the error messages and dumps. But
seeing it's cleaner to IPL than to recycle TCPIP on our Production LPAR I was
hoping someone else had this same problem and had a work around better than the
one we have. But thanks for your input. Really
Howdy,
I haven't used ShopZseries for a while and now I'm hearing we need to use
secure FTP for it. Is there any documentation on how it needs to be setup? Any
certificates needed?
--
For IBM-MAIN subscribe / signoff /
;*
>LinkedIn: http://br.linkedin.com/in/lrosalen
>Phone: +48 (71) 792 809 198
>
>
>2017-05-10 16:07 GMT+02:00 Nai, Dean <dean@doit.nh.gov>:
>
>>
>> Howdy,
>>
>>I haven't used ShopZseries for a while and now I'm hearing we need to
>&
Hi,
We have been getting messages from health checker about ECSA at 84%. We added
another DB2 so that probably pushed us over 80%. Currently we have it set at
CSA=(2M,200M). Any suggestions on increasing it?
Dean Nai
Senior z/OS Systems Programmer
Mainframe Technical Support Group
>This is probably something you can't do because I never saw it but is there
>anyway to point at a specific ASID when starting a started task? The reason
>I'm asking is we have been having issues with S4C5 abends after a Websphere is
>cancelled instead of brought down clean because of open
>Howdy,
I have numerous lists of tape numbers that I need to compare so I can
remove any duplicate and only keep them in one list. Any ISPF or other
utilities for me to run the compares? I have 10 members with over 100 tape
numbers in each. Thanks in advance for any suggestions.Dean
Thanks John
On 6/1/18, 12:35 PM, "IBM Mainframe Discussion List on behalf of John McKown"
wrote:
>On Fri, Jun 1, 2018 at 11:33 AM Nai, Dean wrote:
>
>> Hi,
>>
>>Member here but was wondering if anyone knows if they have a forum like
>> th
Hi,
Member here but was wondering if anyone knows if they have a forum like this
for Linux issuesthanks
Dean Nai
>
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
When you submit a job through TSO your temp dataset gets created. I'm trying to
submit a big job and my temp dataset keeps on running out of space. Any way of
increasing the size of itthanks
Dean Nai
Senior z/OS Systems Programmer
Mainframe Technical Support Group
>
..@sita.co.za> wrote:
>Nai, Dean wrote:
>
>>The problem is it gets submitted by a RACF product called zSECURE so I have
>>no control over it. I just generate the commands it uses and then tell it to
>>submit a job.
>
>In that case, check in zSecure option SE.
t;IBM Mainframe Discussion List on behalf of Nai, Dean"
<IBM-MAIN@LISTSERV.UA.EDU on behalf of dean@doit.nh.gov> wrote:
>When you submit a job through TSO your temp dataset gets created. I'm trying
>to submit a big job and my temp dataset keeps on running out of space. A
l?u=http-3A__mason.gmu.edu_-7Esmetz3=DwIFAw=vYl7KJMDeuM7F-Nqf_hfailBifPmyspo7hrJGlNN7nU=Jrkg6Kqkg1RuQHbN9OpjcGoj051_POke_QQnGwsdEE8=8lrraYUgzbHMNuD_Gxalpj0WhrV2gQ8An2qJhvV6PUc=atcTL-qNdmkQuHYCmY683fEjLPBKm3QgIxHLRMGGTBY=
>
>
>From: IBM Mainframe Discuss
I ran into the exact problem yesterday and after downloading, installing in
RACF and adding them to the SHOPZ keyring everything is now working.
On 8/27/18, 9:11 AM, "IBM Mainframe Discussion List on behalf of Jousma, David"
wrote:
>So, there are a couple of certs needed. Obviously,
Anyone have any JCL to clip a VM volume from one name to another. Thanks in
advance.
Dean Nai
Senior z/OS Systems Programmer
Technical Services Group
Department of Information Technology
State of New Hampshire
27 Hazen Drive
Concord, NH 03301
work: 603-271-1529
Statement of
Hi Tony,
Not a VM person but working on a DR now. Does that work for a VM volume?
Dean Nai
On 11/14/18, 11:07 AM, "IBM Mainframe Discussion List on behalf of Tony
Thigpen" wrote:
>Use REFORMAT in ICKDSF.
>
>Tony Thigpen
>
>Nai, Dean wrote on 11/
>to either ATTACH the Device or DEDICATE it.
>AFAIK, you cannot REFORMAT a Full-Volume MiniDisk.
>
>Regards,
>David
>
>On 2018-11-14 11:48, Tony Thigpen wrote:
>> It works on a VM volume or a VM mini-disk.
>>
>> Tony Thigpen
>>
>> Nai, Dean wrote on
Hi,
Did anyone ever run into this problem at a DR site? At our production site we
have an automated tape library that looks like this:
TAPELIB1 AL 3584-L22888 248 6 113 Y Y
When we bring our LPAR up in DR we are getting an IGD330I Library Logical Type
Not Defined.
Anyone ever run into a problem where the NETSTAT command hangs? We use it in
some scripts to check if things are up or not but to stopped working last
Friday. When we issue it using TSO NETSTAT or issue it from OMVS it just hangs.
Any thoughts?
Dean Nai
>
Hi Brian,
We are running 2.3 and nothings changed in TCPIP for months. Thanks for your
reply:)
Dean Nai
On 3/19/19, 12:58 AM, "IBM Mainframe Discussion List on behalf of Brian
Westerman" wrote:
>You didn't mention the release, but there are some problems with Netstat
Hi,
I never open any networking related tickets with IBM and can't find a bucket
for Communication Server. We are running Z/OS 2.3. Anyone know what the product
name is that supports TCPIP?
Dean Nai
>
--
For
frame Discussion List on behalf of Giliad Wilf"
wrote:
>On Mon, 18 Mar 2019 14:03:10 +0000, Nai, Dean wrote:
>
>>Anyone ever run into a problem where the NETSTAT command hangs? We use it in
>>some scripts to check if things are up or not but to stopped working last
>>
Thanks for the help. I was looking in their newer system and I guess this
product hasn't been converted yet.
Dean Nai
On 3/19/19, 11:59 AM, "IBM Mainframe Discussion List on behalf of Tom Marchant"
wrote:
>On Tue, 19 Mar 2019 14:31:03 +0000, Nai, Dean wrote:
&
I will go with Lizette's suggestion. Thanks everyone for your responses.
Dean
On 2/4/19, 11:27 AM, "IBM Mainframe Discussion List on behalf of John McKown"
wrote:
>On Mon, Feb 4, 2019 at 10:23 AM Nai, Dean wrote:
>
>> Hi,
>>
>>I have almost 1
-VSAM or VSAM or MIXED
>
>You could DFDSS Dump Restore with Renames
>
>
>Or you could write a REXX if NON-VSAM to do REN in TSO
>
>
>Lizette
>
>
>
>> -Original Message-
>> From: IBM Mainframe Discussion List On Behalf Of
>> Nai, Dean
>> S
Hi,
I have almost 1000 datasets I need to rename from say xxx.xxx.xxx to
yyy.xxx.xxx.xxx where yyy would always be the same qualifier. Any thoughts on
be best utility to accomplish this?
Dean Nai
>
--
For
Hi,
Running a DR test. Trying to restore an SMS managed dataset on a floor
system that isn't SMS managed. Getting message ADR709E because it's looking for
a storage class that doesn't exist on the floor system. Any parameters needed?
Any thoughts would be appreciated.
Dean Nai
t; know the content is safe.
>
>On Wed, May 29, 2019 at 12:50 PM Nai, Dean wrote:
>
>> Hi,
>>
>>Running a DR test. Trying to restore an SMS managed dataset on a floor
>> system that isn't SMS managed. Getting message ADR709E because it's looking
>> for a
We just ran out of non-reusable ASID and don't have an IPL scheduled for
another week. We have plenty of reusable ASID left. Will things that used all
the non-reusable ASID like DB2IRLM just use the reusable ones when they get
recycled?
Dean Nai
>
Thanks for your responses.
Dean Nai
On 8/20/19, 7:30 AMEDT, "IBM Mainframe Discussion List on behalf of Peter
Relson" wrote:
> EXTERNAL: Do not open attachments or click on links unless you recognize and
> trust the sender.
>
>
>Will things that used all the non-reusable
ot; wrote:
> EXTERNAL: Do not open attachments or click on links unless you recognize and
> trust the sender.
>
>On Tue, 20 Aug 2019 11:52:10 +, Nai, Dean wrote:
>
>Maybe I am confused but I thought the doc( z/OS MVS Programming: Extended
>Addressability Guide) Jim Muld
We are planning on migrating from CA-1 to RMM. Does anyone know where there
might be some good documentation, maybe a Redbook, or some scripts to help with
the migration. Thanks in advance.
Dean Nai
>
--
For
m/v3/__http://www.redbooks.ibm.com/abstracts/sg246241.html__;!eeWmBe9sc1cuNw!Hz4oAdRGbXEnrq_gEzjfLtdQA9JhmQ4fIprpk5yXSXtUcfPQ9HhQ_izRq96kINmeEw$
>
>
>
>
>David
>
>
>
>-Original Message-----
>
>From: IBM Mainframe Discussion List On Behalf Of
>Nai
Anyone know if there is a DB2LUW forum like this one...thanks
Dean Nai
>
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Not sure if this is just for IBM related products but I'll ask the question
anyway. We are converting over 2000 jobs from ZEKE on Z/OS to ZENA on a ZLINUX
box. Anyone go through this process and if so any tips or scripts to accomplish
this that they know of? Thanks in advance for your
Thanks Chris
Dean Nai
On 9/27/19, 3:40 AMEDT, "IBM Mainframe Discussion List on behalf of Chris
Bowen" wrote:
> EXTERNAL: Do not open attachments or click on links unless you recognize and
> trust the sender.
>
>The IDUG DB2 - L list serv forum covers Db2 LUW as well as z/OS
Excellent. Thanks Steve.
Dean Nai
On 9/19/19, 2:11 PMEDT, "IBM Mainframe Discussion List on behalf of Steve
Beaver" wrote:
> EXTERNAL: Do not open attachments or click on links unless you recognize and
> trust the sender.
>
>I have the CA1 to RMM guide and the old software
Hi Carmen,
We tried using both catalog and VOL=SER=. Both failed.
On 11/14/19, 7:55 AMEST, "IBM Mainframe Discussion List on behalf of Carmen
Vitullo" wrote:
> EXTERNAL: Do not open attachments or click on links unless you recognize and
> trust the sender.
>
>norun will only syntax
DSN.
>
>> -Original Message-
>> From: IBM Mainframe Discussion List On
>> Behalf Of Nai, Dean
>> Sent: Thursday, November 14, 2019 4:49 AM
>> To: IBM-MAIN@LISTSERV.UA.EDU
>> Subject: Re: DFDSS backup retore
>>
>> Hi Mark,
>>
>>
I 49546
>616.653.8429 | fax: 616.653.2717
>
>
>
>-Original Message-----
>From: IBM Mainframe Discussion List On Behalf Of
>Nai, Dean
>Sent: Thursday, November 14, 2019 10:38 AM
>To: IBM-MAIN@LISTSERV.UA.EDU
>Subject: Re: DFDSS backup retore
>
>**CAUTION EXTER
>
>-Original Message-
>From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
>Behalf Of Nai, Dean
>Sent: Wednesday, November 13, 2019 3:18 PM
>To: IBM-MAIN@LISTSERV.UA.EDU
>Subject: [EXTERNAL] Re: DFDSS backup retore
>
>
>NONVSAM --- B
ents or click on links unless you recognize and
> trust the sender.
>
>Is the dataset on a single tape volume or multiple? Can you provide the
>LISTCAT ENT(/) ALL of the file?
>
>Leo
>-Original Message-
>From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.U
Has anyone ever run into a problem where they have full volume backups that
produce a ADR370E message when trying to restore? That message says the label
and DSN on the tape don't match although I know they do. Any thoughts?
Control cards:
Restore -
Admin -
Inddname(indd1) outddname(outdd1) -
ate a corrupt file.
>
>What system level are you at. There is a 5 year old APAR that addresses this
>issue.
>
>> -Original Message-
>> From: IBM Mainframe Discussion List On
>> Behalf Of Nai, Dean
>> Sent: Wednesday, November 13, 2019 11:55 AM
>
sage does not address tape labels. (A wrong label would produce
>>a system error before DFDSS got to the tape.) It says the sequence number of
>>data records is wrong. This may indicate a corrupt file.
>
>>
>
>>What system level are you at. There is a 5 year old APAR tha
>
>_
>Dave Jousma
>AVP | Manager, Systems Engineering
>
>Fifth Third Bank | 1830 East Paris Ave, SE | MD RSCB2H | Grand Rapids,
>MI 49546
>616.653.8429 | f
t image of the conditioned
>volume. A subsequent full volume restore with the COPYVOLID keyword specified
>results in the target volume having the same serial number as the conditioned
>volume.
>
>-Original Message-
>From: IBM Mainframe Discussion List [mailto:IBM-MAIN@L
Hi,
I'm just reaching here because it's probably a hardware limitation but I'll
ask anyway. Our current backup solution is to flashcopy our volumes and then go
back and dump them to tape using DSS. Now we started backing up some of the
huge E3 volumes and it's been taking 50 minutes per
1 hour comp.
Dean Nai
Senior z/OS Systems Programmer
Technical Services Group
Department of Information Technology
State of New Hampshire
27 Hazen Drive
Concord, NH 03301
work: 603-271-1529
Statement of Confidentiality: The contents of this message are
confidential.
Any unauthorized
Ouch,
Wrong IBM group. How embarrassing.
Dean Nai
>
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Hi Mark,
Ran the job with the NORUN part and it got a RC=0. Not sure what that proved
but maybe something. I then dumped the tape label and it looks good although as
we know it only shows the last 17 characters. I used one of the other tapes
that had the same error for the tape label dump.
Anyone have any experience with RACF on VM? I was creating a group that had
over 2000 MDISK statements. I got some type of size error that I didn’t
understand because RACF on VM is new to me. Maybe I need to create it as a
Universal group. Any thoughts?
Dean Nai
>
Howdy,
Anyone know a way to see if a linklst load mode is being used? We made a
userexit change and I wanted to see if it was using the new load module and not
the old one…thanks
Dean
>
--
For IBM-MAIN subscribe /
Hi Larre,
No luck. I’m thinking this is something that can’t be found. Thanks for the
response.
Dean Nai
Senior z/OS Systems Programmer
Technical Services Group
Department of Information Technology
State of New Hampshire
27 Hazen Drive
Concord, NH 03301
work: 603-271-1529
ld also
>write a quick and dirty ASM program to do the load and dump the address.
>
>I have XDC. So, I would just start up a session and issue a load command. :)
>
>Chris
>
>-Original Message-----
>From: IBM Mainframe Discussion List On Behalf Of
>Nai, Dean
>
Anyone ever run into a problem where the CA-1 catalog and the volcat seem to be
out of sync? We keep getting the below messages and aren’t able to eject tapes.
Thought it was 3494 hardware related by IBM doesn’t thing so. Any suggestions?
CBR3770I Volume T00xxx misplaced in library TAPELIB1
>
>Lizette
>
>-Original Message-
>From: IBM Mainframe Discussion List On Behalf Of
>Nai, Dean
>Sent: Wednesday, January 15, 2020 10:31 AM
>To: IBM-MAIN@LISTSERV.UA.EDU
>Subject: Tape problem
>
>Anyone ever run into a problem where the CA-1 catalog and t
All good info.
Currently we backup everything on 3592 nightly and the next morning they go off
site for DR purposes, circa 1980’s
Dean Nai
On 1/22/20, 3:15 AM, "IBM Mainframe Discussion List on behalf of Timothy
Sipples" wrote:
> EXTERNAL: Do not open attachments or click on
These are physical tape. No VTS.
Dean Nai
On 1/16/20, 8:01 PM, "IBM Mainframe Discussion List on behalf of Russell Witt"
wrote:
> EXTERNAL: Do not open attachments or click on links unless you recognize and
> trust the sender.
>
>Brian and Dean,
>
>Yes, you are correct.
TAPELIB1. RC=0014,
RSN=1408, REQTYPE=1A.
Dean Nai
On 1/17/20, 7:42 AM, "IBM Mainframe Discussion List on behalf of Nai, Dean"
wrote:
> EXTERNAL: Do not open attachments or click on links unless
We have a 3592-E07 and our leasing company is telling us the following. Anyone
have any thoughts? We really don’t have the funding for a mirrored VTS and if
it’s not mirrored then we lose our DR plan.
From leasing company.
The first item to be withdrawn from service will be the 3592-C07 at the
Hi Sam,
Just got you message. The problem was fixed but this morning it came back.
I’ll check with IBM and get back to you later today. Thanks for all your help.
Dean Nai
Senior z/OS Systems Programmer
Technical Services Group
Department of Information Technology
State of New
We are keeping our Z14 but Z/OS is going away. It will only be used for Linuz
in the near future.
On 3/9/20, 11:11 PM, "IBM Mainframe Discussion List on behalf of Seymour J
Metz" wrote:
> EXTERNAL: Do not open attachments or click on links unless you recognize and
> trust the sender.
Currently we use CAS9 to start and stop everything during an IPL. CA will be
going away so I was wondering if anyone had thoughts on other cheap or free
products that will do that until we are off Z/OS. Maybe something on the CBT
tape?
Dean Nai
On 3/10/20, 7:56 AM, "IBM
w.bsp-gmbh.com/turnkey/cookbook/bsppilot.html__;!!Oai6dtTQULp8Sw!BiJFUuV5x9g5ZoeBVfbY0HoStyHHzi4C79eKW6_Eij9Ijs9rHJeISl6T5iwOFTKwe5qP$
>
>CBTTAPE 249 file 33 is BSPPILOT.
>
>On Tue, Mar 10, 2020 at 7:21 AM Nai, Dean wrote:
>>
>> Currently we use CAS9 to start and stop everything
RVE
>WAITDOWN 010 RACF
>WAITDOWN 010 RMF
>WAITDOWN 010 RMFGAT
>WAITDOWN 010 RMM
>WAITDOWN 010 SDSF
>WAITDOWN 010 TCPIP
>WAITDOWN 010 TSO
>WAITDOWN 010 VDR
>WAITDOWN 010 VLF
>OPCMDD A,L
>* ? IS PREFIX FOR TSSO
>OPCMD?.P
>OPCMDZ NET,QUICK
>WAITDOWN
Anyone know if we need a POR to activate a new Z/VM LPAR
Dean Nai
>
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
-Original Message-
>From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
>Behalf Of Nai, Dean
>Sent: Tuesday, May 12, 2020 1:25 PM
>To: IBM-MAIN@LISTSERV.UA.EDU
>Subject: Re: TMSINIT
>
>If I remember correctly if SECTWO is s
I know this isn't a Z question but people on here have knowledge about most
things.
I'm trying to run a CA-1 TMSINIT outside of an IPL and I'm getting this
message. Nobody here knows what to reply. Any thoughts.
IEFTMS32 - ENTER USERID AUTHORIZED TO RUN TMSINIT
If I remember correctly if SECTWO is set to yes at IPL then it remembers it
until the next IPL and if you change it to no it won't work until the next IPL.
Thanks:)
From: IBM Mainframe Discussion List on behalf of
Carmen Vitullo
Sent: Tuesday, May 12, 2020
Morning,
Our TSO sessions are timing out in less than 15 minutes even though we has
SMFPRM00 set to JWT(0030). Any thoughts on what else could be causing this?
0090 IKT100I USERID SYSxxxCANCELED DUE TO UNCONDITIONAL LOGOFF
0090 EZZ6034I TN3270 CONN 0010269E LU TCP00059 CONN DROP
length of time of
inactivity and cause a S622
Lastly - any changes since the last time it worked and when it first started to
get S622?
Lizette
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Nai, Dean
Sent: Monday, December 28, 2020 5:49 AM
To: IBM-MAIN
We installed RACF on Z/VM and part of that installed had us activate SMF record
generation. Anyone know if Z/VM can collect Z/OS type SMF records or only RACF
types?
--
For IBM-MAIN subscribe / signoff / archive access
the sender.
On Mon, 14 Jun 2021 16:55:32 +, Nai, Dean wrote:
>We installed RACF on Z/VM and part of that installed had us activate SMF
>record generation.
>Anyone know if Z/VM can collect Z/OS type SMF records or only RACF types?
On z/VM, the only SMF record
Would this be a good place to ask some Z14 crypto questions I'm having a
problem with?
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
I am looking to ftp my RACF password userexit load module from Z/OS to my
desktop and then email it to someone that wants to use it on Z/VM.
1. Can a load module created on Z/OS be loaded and executed on Z/VM?
2. What attachment type should I use for the FTP?
Any thoughts will be
t open attachments or click on links unless you recognize and
trust the sender.
On Mon, 22 Feb 2021 10:26:15 -0600, Paul Gilmartin wrote:
>On Mon, 22 Feb 2021 15:26:53 +0000, Nai, Dean wrote:
>
>>Is anyone aware of a Z/VM mainframe discussion group or a Z/VM
Is anyone aware of a Z/VM mainframe discussion group or a Z/VM RACF discussion
group? I am members of both the Z/OS mainframe and security groups.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
83 matches
Mail list logo
