Re: NJE over IP
Sry it's a copy paste error. It should read as I instead of 1. Thanks On Wed, 15 Feb, 2023, 8:39 AM Steve Horein, wrote: > What's going on with your message IDs? > Why do they end with a "1" in place of an "I"? > > On Tue, Feb 14, 2023 at 8:47 PM Steve David > wrote: > > > Hello, > > > > We had some issue setting up NJE over Ip, It's a multi-stack environment > > (TCPIPA1 & TCPIPA2), we had problem using(Nat) ip and port 175. Netsrv1 > > couldn't bind to port 175. We did verified that port 175 was not in use > > from both the stacks. > > > > IAZ05451 NETSRV1 Error encountered in function > > bind() - EDC81161 Address not available. > > > > IAZ05011 NETSRV1 Bind for the server socket failed,TCP/IP rc: 1116 > > > > IAZ05361 NETSRV1 NJETCP SERVER RECEIVED A PURGE REQUEST > > > > IEA9891 SLIP TRAP ID=X13E Matched. JOBNAME=JES2S001, ASID=00CB. > > > > IAZ05161 NETSRV1 Error while closing client socket,TCP/IP rc: 113 > > > > IEF4041 IEESYSAS-ENDED - TIME=07.07.55 > > > > IEF1961 IEF1421 IEESYSAS JES2S001-STEP WAS > > EXECUTED-COND CODE > > > > Thanks > > Steve > > > > -- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
NJE over IP
Hello, We had some issue setting up NJE over Ip, It's a multi-stack environment (TCPIPA1 & TCPIPA2), we had problem using(Nat) ip and port 175. Netsrv1 couldn't bind to port 175. We did verified that port 175 was not in use from both the stacks. IAZ05451 NETSRV1 Error encountered in function bind() - EDC81161 Address not available. IAZ05011 NETSRV1 Bind for the server socket failed,TCP/IP rc: 1116 IAZ05361 NETSRV1 NJETCP SERVER RECEIVED A PURGE REQUEST IEA9891 SLIP TRAP ID=X13E Matched. JOBNAME=JES2S001, ASID=00CB. IAZ05161 NETSRV1 Error while closing client socket,TCP/IP rc: 113 IEF4041 IEESYSAS-ENDED - TIME=07.07.55 IEF1961 IEF1421 IEESYSAS JES2S001-STEP WAS EXECUTED-COND CODE Thanks Steve -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
CL Supersession V21
Hello, We have requirement to update inactive session timeout for Prod CICS region in CL SS, Is it possible to update dynamically without bouncing CL SS, As none has Admin access not sure if we have default admin IDs in CL SS,like something similar to TPX Admin IDs(ie TPXADMIN,STXADMIN ) . Is there a way to update a specific user id as Admin in CL SS? As the guide says someone with Admin Authority has to grant access!! Steve -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Connect Direct Secure + - Certificate in use
Hi All, We are planning to upgrade CD V4.8 to V5.2, we lost the key to open the key database which used for secure+ encryption. We have used GSKKYMAN utility to generate the certificate and signed by third party CA. SECURE.SSL.PATH.PREFIX =/usr/lpp/connectd/conn.kdb, We have couple of certificates mentioned in above path, out of which one is expiring in Mar 2020 and other one in Nov 2020, Is there a way to find which certificate is in use for SSL Encryption? Thanks Steve -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Connect upgrade Secure+ requirement
We have load module of ICSF but we don't have smpe environment to determine its level. Is there a way to print any load module and see the details like any eyecatcher ? Thanks Steve On Tuesday, 28 January 2020, Joe Monk wrote: > HCR77A0 is the minimum supported ICSF version on z/OS 1.13 for connect 5.2. > As to installing without SMP/E ... thats a head scratcher. I would not just > copy the libraries from z/OS 2.1 ... I would see if IBM can make you a > tape. > > Joe > > On Tue, Jan 28, 2020 at 6:27 AM Steve David > wrote: > > > Thank you Joe , so FMID HCR77A0 comes with zOS V2.1 base works well with > > zOS 1.13..? Since we don't have working SMPE environment in zOS 1.13, is > it > > ok to copy CSF libraries from zOS V2.1 ? Actually we have CSF.** > libraries > > available on 1.13 as well,but not sure whether ICSF will support CD V5.2 > > > > Thanks > > Steve > > > > > > On Tue, 28 Jan 2020 at 16:12, Joe Monk wrote: > > > > > This will tell you: > > > > > > > > > > > https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.2. > 0/com.ibm.zos.v2r2.csfb200/csffmid.htm > > > > > > You need FMID HCR77A0 or above. > > > > > > Joe > > > > > > On Mon, Jan 27, 2020 at 11:11 PM Steve David < > steve.davids...@gmail.com> > > > wrote: > > > > > > > Hi All, > > > > > > > > We are upgrading CD from V4.8 to V5.2, currently running in zOS 1.13, > > but > > > > we dont have working smpe environment and currently we dont have ICSF > > > > installed. To enable CD Secure + in V5.2, we need to have ICSF > > installed, > > > > can you please advise what minimum version of ICSF needed for zOS > 1.13 > > > and > > > > is it possible to install using non smpe method.? > > > > > > > > Thanks > > > > Steve > > > > > > > > > -- > > > > For IBM-MAIN subscribe / signoff / archive access instructions, > > > > send email to lists...@listserv.ua.edu with the message: INFO > IBM-MAIN > > > > > > > > > > -- > > > For IBM-MAIN subscribe / signoff / archive access instructions, > > > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > > > > -- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Connect upgrade Secure+ requirement
Thank you Joe , so FMID HCR77A0 comes with zOS V2.1 base works well with zOS 1.13..? Since we don't have working SMPE environment in zOS 1.13, is it ok to copy CSF libraries from zOS V2.1 ? Actually we have CSF.** libraries available on 1.13 as well,but not sure whether ICSF will support CD V5.2 Thanks Steve On Tue, 28 Jan 2020 at 16:12, Joe Monk wrote: > This will tell you: > > > https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.2.0/com.ibm.zos.v2r2.csfb200/csffmid.htm > > You need FMID HCR77A0 or above. > > Joe > > On Mon, Jan 27, 2020 at 11:11 PM Steve David > wrote: > > > Hi All, > > > > We are upgrading CD from V4.8 to V5.2, currently running in zOS 1.13, but > > we dont have working smpe environment and currently we dont have ICSF > > installed. To enable CD Secure + in V5.2, we need to have ICSF installed, > > can you please advise what minimum version of ICSF needed for zOS 1.13 > and > > is it possible to install using non smpe method.? > > > > Thanks > > Steve > > > > -- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Connect upgrade Secure+ requirement
Hi All, We are upgrading CD from V4.8 to V5.2, currently running in zOS 1.13, but we dont have working smpe environment and currently we dont have ICSF installed. To enable CD Secure + in V5.2, we need to have ICSF installed, can you please advise what minimum version of ICSF needed for zOS 1.13 and is it possible to install using non smpe method.? Thanks Steve -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
