11, 2020 7:41 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Determining required z/series hardware level - REVISED
Tachyon Web page says last updated
05/29/2010 11:06:28
Charles
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Tony Har
Tachyon Web page says last updated
05/29/2010 11:06:28
Charles
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Tony Harminc
Sent: Wednesday, December 9, 2020 4:05 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Determining required z
On Wed, 9 Dec 2020 at 10:53, Charles Mills wrote:
>
> I have been thinking about this. It is a daunting project. I once set out to
> develop a simple list of opcodes with their required minimum hardware level.
> I wanted to be able to answer questions of the form "management wants this
> product
, December 8, 2020 11:27 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Determining required z/series hardware level - REVISED
There is always the approach of running the program. ABEND S0C1 indicates
that you need a newer box (or better programmers).
I suppose an arguably good corporate standard
- are equivalent; if you prefer one over the other, use it.
Charles
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of Mike Hochee
Sent: Tuesday, December 8, 2020 6:54 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Determining re
nframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Mike Hochee
> Sent: Tuesday, December 8, 2020 5:50 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: Determining required z/series hardware level - REVISED
>
> Warning! This is a fake (spoofed) message. DO NO
Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of Mike Hochee
Sent: Tuesday, December 8, 2020 6:54 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Determining required z/series hardware level - REVISED
Thanks all, yet again, for all the excellent ideas
] On Behalf
Of Mike Hochee
Sent: Tuesday, December 8, 2020 5:50 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Determining required z/series hardware level - REVISED
Warning! This is a fake (spoofed) message. DO NOT TRUST!
Oops, got the hardware lvl for AHI wrong, so changed 'G9' to 'G10'
Hi,
I'm
: Tuesday, December 8, 2020 7:25 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Determining required z/series hardware level - REVISED
Is the facility to check for the facility bits often present in load
modules? I. E. a certain opcode or SVC call? Then hou could look at
the bits being checked.
On Tue
: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Determining required z/series hardware level - REVISED
As one who has actually used the Assembler Toolkit disassembler for "lost
source, lost listings" cases, I would warn anyone looking to use it that it
requires quite a lot of customization and experimen
December 8, 2020 6:40 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: Determining required z/series hardware level - REVISED
>
> If there isn't a ready made solution available, the High Level Assembler
> Toolkit has a disassembler utility which could provide the input to a new
> to
]
Sent: Tuesday, December 8, 2020 6:40 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Determining required z/series hardware level - REVISED
If there isn't a ready made solution available, the High Level Assembler
Toolkit has a disassembler utility which could provide the input to a new
tool that scans
Of
Peter Van Dyke
Sent: Tuesday, December 8, 2020 6:40 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Determining required z/series hardware level - REVISED
If there isn't a ready made solution available, the High Level Assembler
Toolkit has a disassembler utility which could provide the input to
can/could generate in its SYSPRINT
output stream.
SMOP.
Peter
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Charles Mills
Sent: Tuesday, December 8, 2020 6:27 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Determining required z/series hardware level - REVISED
EXTE
t; From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Farley, Peter x23353
> Sent: Tuesday, December 8, 2020 3:17 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: Determining required z/series hardware level - REVISED
>
> It's not foolproof, but f
ssage-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of Farley, Peter x23353
Sent: Tuesday, December 8, 2020 3:17 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Determining required z/series hardware level - REVISED
It's not foolproof, but for both HLL's and as
riginal Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of Mike Hochee
Sent: Tuesday, December 8, 2020 2:50 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Determining required z/series hardware level - REVISED
Oops, got the hardware lvl for AHI wrong,
half Of
Mike Hochee
Sent: Tuesday, December 8, 2020 5:50 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Determining required z/series hardware level - REVISED
Oops, got the hardware lvl for AHI wrong, so changed 'G9' to 'G10'
Hi,
I'm looking for a utility/program which is capable of readin
Oops, got the hardware lvl for AHI wrong, so changed 'G9' to 'G10'
Hi,
I'm looking for a utility/program which is capable of reading a z/OS
executable, whether an lmod or program object, or unbound object code, and
examining it for hardware/architecture level compatibility. I'm not
Hi,
I'm looking for a utility/program which is capable of reading a z/OS
executable, whether an lmod or program object, or unbound object code, and
examining it for hardware/architecture level compatibility. I'm not
specifically referring to the ARCLVL of on the SYSSTATE macro, although I know
20 matches
Mail list logo
