Re: /tmp issue
As mentioned, thoroughly inappropriate to use /tmp for mass Serverpac /ShopzSeries downloads or decompressions. I have always used a personal zFS for such purposes (SMPNTS, or SMPWKDIR). Which can be easily re-sized/re-mounted depending on needs. I'm wondering what the OP thinks SYSTEM/tmp is for (if sysplex-wide, otherwise just /tmp) , especially when it is directed to virtual storage. That's a performance thing for particular reasons, not a mindless convenience. Ant. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Thomas Conley Sent: Friday, 17 April 2015 10:52 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: /tmp issue On 4/16/2015 5:18 PM, Staller, Allan wrote: This is a TFS (TEMP FILE SYSTEM) and is backed by virtual storage. You need approx.. 600 MB of space. I would recommend allocating a PFS (Physical File System) large enough to hold the 600 MB and mounting that PFS at /TMP. Once done, the PFS can be handled by use of AGGGROW and AGGRINFO. See the Distributed File Services manual SC23-6887-00 (for z/OS 2.1). An IPL should not be necessary for the above. BTW, when you go to expand the SERVERPAC files, you will need approx. 3 times the space needed for download. HTH, snip I am trying to down load datasets from serverpac. I am getting this message : 6831167 kbytes are required. Please obtain more space before attempting restore. My /tmp file is as follows: /SYSTEM/tmp , Status . . . . . . . . :,Available File system type . . . :,TFS Mount mode . . . . . . :,R/W Device number . . . . :,2 Type number . . . . . :,1 DD name . . . . . . . :, Block size . . . . . . :,4096 Total blocks . . . . . :,1792000 Available blocks . . . :,1543002 Blocks in use . . . . :,248998 /snip I read the space required as 6.9GB, so you'll need a mod-9 to hold your file. I recommend creating an /SMPNTS mount point, mounting your filesystem there, then downloading the ServerPac. As Allan pointed out, you will likely need at least 3 more mod-9s to unspin those tarballs. Regards, Tom Conley -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: /tmp issue
This is a TFS (TEMP FILE SYSTEM) and is backed by virtual storage. You need approx.. 600 MB of space. I would recommend allocating a PFS (Physical File System) large enough to hold the 600 MB and mounting that PFS at /TMP. Once done, the PFS can be handled by use of AGGGROW and AGGRINFO. See the Distributed File Services manual SC23-6887-00 (for z/OS 2.1). An IPL should not be necessary for the above. BTW, when you go to expand the SERVERPAC files, you will need approx. 3 times the space needed for download. HTH, snip I am trying to down load datasets from serverpac. I am getting this message : 6831167 kbytes are required. Please obtain more space before attempting restore. My /tmp file is as follows: /SYSTEM/tmp , Status . . . . . . . . :,Available File system type . . . :,TFS Mount mode . . . . . . :,R/W Device number . . . . :,2 Type number . . . . . :,1 DD name . . . . . . . :, Block size . . . . . . :,4096 Total blocks . . . . . :,1792000 Available blocks . . . :,1543002 Blocks in use . . . . :,248998 /snip -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
/tmp issue
I am trying to down load datasets from serverpac. I am getting this message : 6831167 kbytes are required. Please obtain more space before attempting restore. My /tmp file is as follows: /SYSTEM/tmp , Status . . . . . . . . :,Available File system type . . . :,TFS Mount mode . . . . . . :,R/W Device number . . . . :,2 Type number . . . . . :,1 DD name . . . . . . . :, Block size . . . . . . :,4096 Total blocks . . . . . :,1792000 Available blocks . . . :,1543002 Blocks in use . . . . :,248998 I see that there 248998 blocks in use. Do I need to re-ipl to clean this out or? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: /tmp issue
On 4/16/2015 5:18 PM, Staller, Allan wrote: This is a TFS (TEMP FILE SYSTEM) and is backed by virtual storage. You need approx.. 600 MB of space. I would recommend allocating a PFS (Physical File System) large enough to hold the 600 MB and mounting that PFS at /TMP. Once done, the PFS can be handled by use of AGGGROW and AGGRINFO. See the Distributed File Services manual SC23-6887-00 (for z/OS 2.1). An IPL should not be necessary for the above. BTW, when you go to expand the SERVERPAC files, you will need approx. 3 times the space needed for download. HTH, snip I am trying to down load datasets from serverpac. I am getting this message : 6831167 kbytes are required. Please obtain more space before attempting restore. My /tmp file is as follows: /SYSTEM/tmp , Status . . . . . . . . :,Available File system type . . . :,TFS Mount mode . . . . . . :,R/W Device number . . . . :,2 Type number . . . . . :,1 DD name . . . . . . . :, Block size . . . . . . :,4096 Total blocks . . . . . :,1792000 Available blocks . . . :,1543002 Blocks in use . . . . :,248998 /snip I read the space required as 6.9GB, so you'll need a mod-9 to hold your file. I recommend creating an /SMPNTS mount point, mounting your filesystem there, then downloading the ServerPac. As Allan pointed out, you will likely need at least 3 more mod-9s to unspin those tarballs. Regards, Tom Conley -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
