Re: ISMF msg
I did not. Wish I had thought to do that. Thanks for the reminder though. On Fri, Mar 8, 2019 at 2:28 PM Mark Pace wrote: > This is a test system where no one is allowed except me. > > On Fri, Mar 8, 2019 at 12:53 PM Elardus Engelbrecht < > elardus.engelbre...@sita.co.za> wrote: > >> Mark Pace wrote: >> >> >I checked in RACF and I had no rules protecting the SYS3 datasets, so I >> don't think that was the issue. >> >> No 'rules'? This is not looking good, but then, it should probably not >> affect your issue, AFAIK. >> >> Do you have any profiles defined at all or have something in the Global >> Access Table? >> >> What is your PROTECTALL status in RACF? >> >> Groete / Greetings >> Elardus Engelbrecht >> >> -- >> For IBM-MAIN subscribe / signoff / archive access instructions, >> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN >> > > > -- > The postings on this site are my own and don’t necessarily represent > Mainline’s positions or opinions > > Mark D Pace > Senior Systems Engineer > Mainline Information Systems > > > > -- The postings on this site are my own and don’t necessarily represent Mainline’s positions or opinions Mark D Pace Senior Systems Engineer Mainline Information Systems -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: ISMF msg
This is a test system where no one is allowed except me. On Fri, Mar 8, 2019 at 12:53 PM Elardus Engelbrecht < elardus.engelbre...@sita.co.za> wrote: > Mark Pace wrote: > > >I checked in RACF and I had no rules protecting the SYS3 datasets, so I > don't think that was the issue. > > No 'rules'? This is not looking good, but then, it should probably not > affect your issue, AFAIK. > > Do you have any profiles defined at all or have something in the Global > Access Table? > > What is your PROTECTALL status in RACF? > > Groete / Greetings > Elardus Engelbrecht > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- The postings on this site are my own and don’t necessarily represent Mainline’s positions or opinions Mark D Pace Senior Systems Engineer Mainline Information Systems -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: ISMF msg
Did you press F1 after getting RC=08 in ISMF. Sometimes you can get a better explanation that way. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Mark Pace Sent: Friday, March 8, 2019 12:24 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: ISMF msg I fixed it, but not sure why/how it wasn't working. At some point I remember my SYS1.DFSMS.SCDS was missing the correct configuration. The ACDS was correct, but I wasn't sure how to get it retrieve in to an SCDS. I finally remembered that I could save the ACDS into a new SCDS. That became SYS3.DFSMS.SCDS. I made SYS3.DFSMS.SCDS the current SCDS and it was that one I was trying to update. So I tried to SAVESCDS to the old SYS1.DFSMS.SCDS. That worked and I can now update SYS1.DFSMS.SCDS with the new volume and activate it. I checked in RACF and I had no rules protecting the SYS3 datasets, so I don't think that was the issue. On Fri, Mar 8, 2019 at 11:55 AM Carmen Vitullo wrote: > YW! WOW that's a lot of 'stuff' > hope you get it figured out, let us know > > > > Carmen Vitullo > > - Original Message - > > From: "Mark Pace" > To: IBM-MAIN@LISTSERV.UA.EDU > Sent: Friday, March 8, 2019 10:49:57 AM > Subject: Re: ISMF msg > > Thanks for the pointer. Now to figure out what it is telling me. > > 11:47 Start of ISPF Log - - - - Session # 1580 > --- > 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); > FUNCTION(VOLUME) > 11:48 - DGTUV039 SYS3.DFSMS.SCDS > > 11:48 - DGTUV035 RETURN CODE(0008); REASON > CODE(6131) > 11:48 - DGTUV027 MODULE(IGDCSU10); PROCEDURE() > > 11:48 - DGTUV028 MESSAGE ID( - ); LAST > PANEL(DGTDCSG7) > 11:48 - DGTUV029 SERVICE(SMS/CS); > FEEDBACK(SUBRET: 0 SUBRSN: 0) > 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); > FUNCTION(VOLUME) > 11:48 - DGTUV039 SYS3.DFSMS.SCDS > > 11:48 - DGTUV035 RETURN CODE(0012); REASON > CODE(3117) > 11:48 - DGTUV027 MODULE(DGTFCFAC); > PROCEDURE(DGTFCFAC) > 11:48 - DGTUV028 MESSAGE ID(DGTUC051 - DGTUC051); LAST PANEL(DGTDCSG7) > 11:48 - DGTUV029 SERVICE(SMS/CS); > FEEDBACK(ACCESS, CSI ACCESS MODE = W) > 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); > FUNCTION(VOLUME) > 11:48 - DGTUV039 SYS3.DFSMS.SCDS > > 11:48 - DGTUV035 RETURN CODE(0012); REASON > CODE(3117) > 11:48 - DGTUV027 MODULE(DGTFSGP3); > PROCEDURE(ACCESS) > 11:48 - DGTUV028 MESSAGE ID( - ); LAST > PANEL(DGTDCSG7) > 11:48 - DGTUV029 SERVICE(DGTECFAC); > FEEDBACK(CALLMOD:DGTFSGSV CALLPROC:PROCOP2P) > 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); > FUNCTION(VOLUME) > 11:48 - DGTUV039 SYS3.DFSMS.SCDS > > 11:48 - DGTUV035 RETURN CODE(0012); REASON > CODE(3221) > 11:48 - DGTUV027 MODULE(DGTFSGVR); > PROCEDURE(VOSEL) > 11:48 - DGTUV028 MESSAGE ID( - ); LAST > PANEL(DGTDCSG7) > 11:48 - DGTUV029 SERVICE(NONE); > FEEDBACK(ELEMENT NAME: TMPSG1) > > On Fri, Mar 8, 2019 at 11:40 AM Carmen Vitullo > wrote: > > > some if the ISMF messages may have just gone to the ISPF log, you > > may > wnat > > to check 7.5 to see if the log is active and if any messages are > > there , just a thought > > > > > > Carmen Vitullo > > > > - Original Message - > > > > From: "Mark Pace" > > To: IBM-MAIN@LISTSERV.UA.EDU > > Sent: Friday, March 8, 2019 10:38:05 AM > > Subject: Re: ISMF msg > > > > I'm NOT running HSM. > > > > On Fri, Mar 8, 2019 at 11:37 AM Mark Pace > wrote: > > > > > I'm running HSM, no started task to look at. > > > > > > I'll check on my TSO profile. > > > > > > On Fri, Mar 8, 2019 at 11:22 AM Lizette Koehler < > stars...@mindspring.com> > > > > > wrote: > > > > > >> Sometime the messages come back to the tso session when using ISMF. > > >> > > >> Check your TSO PROFILE and make sure you are not suppressing them > > >> > > >> You could also check the DFHSM STC Task for the messages, they > > >> could > be > > >> there as well. > > >> > > >> > > >> Lizette > > >> > > >> > > >> > -Original Message- > > >> > From: IBM Mainframe Discussion List > > >> > On > > >> Behalf Of > > >> > Mark Pace > > >> > Sent: Friday, March 08, 2019 9:16 AM > > >> > To: IBM-MAIN@LISTSERV.UA.EDU > > >> > Subject: ISMF msg > > >> >
Re: ISMF msg
great! the SYS3 dataset still may have caused the issue if you're in a protect all configuration. I still have the notes from z/os 1.3 on how to recreate a SCDS from an ACDS. good stuff and good that it's still a valid fix ! Carmen Vitullo - Original Message - From: "Mark Pace" To: IBM-MAIN@LISTSERV.UA.EDU Sent: Friday, March 8, 2019 11:23:43 AM Subject: Re: ISMF msg I fixed it, but not sure why/how it wasn't working. At some point I remember my SYS1.DFSMS.SCDS was missing the correct configuration. The ACDS was correct, but I wasn't sure how to get it retrieve in to an SCDS. I finally remembered that I could save the ACDS into a new SCDS. That became SYS3.DFSMS.SCDS. I made SYS3.DFSMS.SCDS the current SCDS and it was that one I was trying to update. So I tried to SAVESCDS to the old SYS1.DFSMS.SCDS. That worked and I can now update SYS1.DFSMS.SCDS with the new volume and activate it. I checked in RACF and I had no rules protecting the SYS3 datasets, so I don't think that was the issue. On Fri, Mar 8, 2019 at 11:55 AM Carmen Vitullo wrote: > YW! WOW that's a lot of 'stuff' > hope you get it figured out, let us know > > > > Carmen Vitullo > > - Original Message - > > From: "Mark Pace" > To: IBM-MAIN@LISTSERV.UA.EDU > Sent: Friday, March 8, 2019 10:49:57 AM > Subject: Re: ISMF msg > > Thanks for the pointer. Now to figure out what it is telling me. > > 11:47 Start of ISPF Log - - - - Session # 1580 > --- > 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); > FUNCTION(VOLUME) > 11:48 - DGTUV039 SYS3.DFSMS.SCDS > > 11:48 - DGTUV035 RETURN CODE(0008); REASON > CODE(6131) > 11:48 - DGTUV027 MODULE(IGDCSU10); PROCEDURE() > > 11:48 - DGTUV028 MESSAGE ID( - ); LAST > PANEL(DGTDCSG7) > 11:48 - DGTUV029 SERVICE(SMS/CS); > FEEDBACK(SUBRET: 0 SUBRSN: 0) > 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); > FUNCTION(VOLUME) > 11:48 - DGTUV039 SYS3.DFSMS.SCDS > > 11:48 - DGTUV035 RETURN CODE(0012); REASON > CODE(3117) > 11:48 - DGTUV027 MODULE(DGTFCFAC); > PROCEDURE(DGTFCFAC) > 11:48 - DGTUV028 MESSAGE ID(DGTUC051 - > DGTUC051); LAST PANEL(DGTDCSG7) > 11:48 - DGTUV029 SERVICE(SMS/CS); > FEEDBACK(ACCESS, CSI ACCESS MODE = W) > 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); > FUNCTION(VOLUME) > 11:48 - DGTUV039 SYS3.DFSMS.SCDS > > 11:48 - DGTUV035 RETURN CODE(0012); REASON > CODE(3117) > 11:48 - DGTUV027 MODULE(DGTFSGP3); > PROCEDURE(ACCESS) > 11:48 - DGTUV028 MESSAGE ID( - ); LAST > PANEL(DGTDCSG7) > 11:48 - DGTUV029 SERVICE(DGTECFAC); > FEEDBACK(CALLMOD:DGTFSGSV CALLPROC:PROCOP2P) > 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); > FUNCTION(VOLUME) > 11:48 - DGTUV039 SYS3.DFSMS.SCDS > > 11:48 - DGTUV035 RETURN CODE(0012); REASON > CODE(3221) > 11:48 - DGTUV027 MODULE(DGTFSGVR); > PROCEDURE(VOSEL) > 11:48 - DGTUV028 MESSAGE ID( - ); LAST > PANEL(DGTDCSG7) > 11:48 - DGTUV029 SERVICE(NONE); > FEEDBACK(ELEMENT NAME: TMPSG1) > > On Fri, Mar 8, 2019 at 11:40 AM Carmen Vitullo > wrote: > > > some if the ISMF messages may have just gone to the ISPF log, you may > wnat > > to check 7.5 to see if the log is active and if any messages are there , > > just a thought > > > > > > Carmen Vitullo > > > > - Original Message - > > > > From: "Mark Pace" > > To: IBM-MAIN@LISTSERV.UA.EDU > > Sent: Friday, March 8, 2019 10:38:05 AM > > Subject: Re: ISMF msg > > > > I'm NOT running HSM. > > > > On Fri, Mar 8, 2019 at 11:37 AM Mark Pace > wrote: > > > > > I'm running HSM, no started task to look at. > > > > > > I'll check on my TSO profile. > > > > > > On Fri, Mar 8, 2019 at 11:22 AM Lizette Koehler < > stars...@mindspring.com> > > > > > wrote: > > > > > >> Sometime the messages come back to the tso session when using ISMF. > > >> > > >> Check your TSO PROFILE and make sure you are not suppressing them > > >> > > >> You could also check the DFHSM STC Task for the messages, they could > be > > >> there as well. > > >> > > >> > > >> Lizette > > >> > > >> > > >> > -Original Message- > > >> > From: IBM Mainframe Discussion List On > > >> Behalf Of > > >> > Mark Pace > > >> > Sent: Friday, March 08, 2019 9:16 AM > > &g
Re: ISMF msg
Mark Pace wrote: >I checked in RACF and I had no rules protecting the SYS3 datasets, so I don't >think that was the issue. No 'rules'? This is not looking good, but then, it should probably not affect your issue, AFAIK. Do you have any profiles defined at all or have something in the Global Access Table? What is your PROTECTALL status in RACF? Groete / Greetings Elardus Engelbrecht -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: ISMF msg
I fixed it, but not sure why/how it wasn't working. At some point I remember my SYS1.DFSMS.SCDS was missing the correct configuration. The ACDS was correct, but I wasn't sure how to get it retrieve in to an SCDS. I finally remembered that I could save the ACDS into a new SCDS. That became SYS3.DFSMS.SCDS. I made SYS3.DFSMS.SCDS the current SCDS and it was that one I was trying to update. So I tried to SAVESCDS to the old SYS1.DFSMS.SCDS. That worked and I can now update SYS1.DFSMS.SCDS with the new volume and activate it. I checked in RACF and I had no rules protecting the SYS3 datasets, so I don't think that was the issue. On Fri, Mar 8, 2019 at 11:55 AM Carmen Vitullo wrote: > YW! WOW that's a lot of 'stuff' > hope you get it figured out, let us know > > > > Carmen Vitullo > > - Original Message - > > From: "Mark Pace" > To: IBM-MAIN@LISTSERV.UA.EDU > Sent: Friday, March 8, 2019 10:49:57 AM > Subject: Re: ISMF msg > > Thanks for the pointer. Now to figure out what it is telling me. > > 11:47 Start of ISPF Log - - - - Session # 1580 > --- > 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); > FUNCTION(VOLUME) > 11:48 - DGTUV039 SYS3.DFSMS.SCDS > > 11:48 - DGTUV035 RETURN CODE(0008); REASON > CODE(6131) > 11:48 - DGTUV027 MODULE(IGDCSU10); PROCEDURE() > > 11:48 - DGTUV028 MESSAGE ID( - ); LAST > PANEL(DGTDCSG7) > 11:48 - DGTUV029 SERVICE(SMS/CS); > FEEDBACK(SUBRET: 0 SUBRSN: 0) > 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); > FUNCTION(VOLUME) > 11:48 - DGTUV039 SYS3.DFSMS.SCDS > > 11:48 - DGTUV035 RETURN CODE(0012); REASON > CODE(3117) > 11:48 - DGTUV027 MODULE(DGTFCFAC); > PROCEDURE(DGTFCFAC) > 11:48 - DGTUV028 MESSAGE ID(DGTUC051 - > DGTUC051); LAST PANEL(DGTDCSG7) > 11:48 - DGTUV029 SERVICE(SMS/CS); > FEEDBACK(ACCESS, CSI ACCESS MODE = W) > 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); > FUNCTION(VOLUME) > 11:48 - DGTUV039 SYS3.DFSMS.SCDS > > 11:48 - DGTUV035 RETURN CODE(0012); REASON > CODE(3117) > 11:48 - DGTUV027 MODULE(DGTFSGP3); > PROCEDURE(ACCESS) > 11:48 - DGTUV028 MESSAGE ID( - ); LAST > PANEL(DGTDCSG7) > 11:48 - DGTUV029 SERVICE(DGTECFAC); > FEEDBACK(CALLMOD:DGTFSGSV CALLPROC:PROCOP2P) > 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); > FUNCTION(VOLUME) > 11:48 - DGTUV039 SYS3.DFSMS.SCDS > > 11:48 - DGTUV035 RETURN CODE(0012); REASON > CODE(3221) > 11:48 - DGTUV027 MODULE(DGTFSGVR); > PROCEDURE(VOSEL) > 11:48 - DGTUV028 MESSAGE ID( - ); LAST > PANEL(DGTDCSG7) > 11:48 - DGTUV029 SERVICE(NONE); > FEEDBACK(ELEMENT NAME: TMPSG1) > > On Fri, Mar 8, 2019 at 11:40 AM Carmen Vitullo > wrote: > > > some if the ISMF messages may have just gone to the ISPF log, you may > wnat > > to check 7.5 to see if the log is active and if any messages are there , > > just a thought > > > > > > Carmen Vitullo > > > > - Original Message - > > > > From: "Mark Pace" > > To: IBM-MAIN@LISTSERV.UA.EDU > > Sent: Friday, March 8, 2019 10:38:05 AM > > Subject: Re: ISMF msg > > > > I'm NOT running HSM. > > > > On Fri, Mar 8, 2019 at 11:37 AM Mark Pace > wrote: > > > > > I'm running HSM, no started task to look at. > > > > > > I'll check on my TSO profile. > > > > > > On Fri, Mar 8, 2019 at 11:22 AM Lizette Koehler < > stars...@mindspring.com> > > > > > wrote: > > > > > >> Sometime the messages come back to the tso session when using ISMF. > > >> > > >> Check your TSO PROFILE and make sure you are not suppressing them > > >> > > >> You could also check the DFHSM STC Task for the messages, they could > be > > >> there as well. > > >> > > >> > > >> Lizette > > >> > > >> > > >> > -Original Message- > > >> > From: IBM Mainframe Discussion List On > > >> Behalf Of > > >> > Mark Pace > > >> > Sent: Friday, March 08, 2019 9:16 AM > > >> > To: IBM-MAIN@LISTSERV.UA.EDU > > >> > Subject: ISMF msg > > >> > > > >> > I'm trying to add a new volume to a storage pool. > > >> > > > >> > When I try to add I get this message on the Panel - SMS RETCODE: > > >> 8 > > >> > > > >> > Searching google it points to ARC0940I - which tells me to look are > > >> preceding > > >> > ARCxxx messages. I am not seeing any ARC messa
Re: ISMF msg
YW! WOW that's a lot of 'stuff' hope you get it figured out, let us know Carmen Vitullo - Original Message - From: "Mark Pace" To: IBM-MAIN@LISTSERV.UA.EDU Sent: Friday, March 8, 2019 10:49:57 AM Subject: Re: ISMF msg Thanks for the pointer. Now to figure out what it is telling me. 11:47 Start of ISPF Log - - - - Session # 1580 --- 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); FUNCTION(VOLUME) 11:48 - DGTUV039 SYS3.DFSMS.SCDS 11:48 - DGTUV035 RETURN CODE(0008); REASON CODE(6131) 11:48 - DGTUV027 MODULE(IGDCSU10); PROCEDURE() 11:48 - DGTUV028 MESSAGE ID( - ); LAST PANEL(DGTDCSG7) 11:48 - DGTUV029 SERVICE(SMS/CS); FEEDBACK(SUBRET: 0 SUBRSN: 0) 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); FUNCTION(VOLUME) 11:48 - DGTUV039 SYS3.DFSMS.SCDS 11:48 - DGTUV035 RETURN CODE(0012); REASON CODE(3117) 11:48 - DGTUV027 MODULE(DGTFCFAC); PROCEDURE(DGTFCFAC) 11:48 - DGTUV028 MESSAGE ID(DGTUC051 - DGTUC051); LAST PANEL(DGTDCSG7) 11:48 - DGTUV029 SERVICE(SMS/CS); FEEDBACK(ACCESS, CSI ACCESS MODE = W) 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); FUNCTION(VOLUME) 11:48 - DGTUV039 SYS3.DFSMS.SCDS 11:48 - DGTUV035 RETURN CODE(0012); REASON CODE(3117) 11:48 - DGTUV027 MODULE(DGTFSGP3); PROCEDURE(ACCESS) 11:48 - DGTUV028 MESSAGE ID( - ); LAST PANEL(DGTDCSG7) 11:48 - DGTUV029 SERVICE(DGTECFAC); FEEDBACK(CALLMOD:DGTFSGSV CALLPROC:PROCOP2P) 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); FUNCTION(VOLUME) 11:48 - DGTUV039 SYS3.DFSMS.SCDS 11:48 - DGTUV035 RETURN CODE(0012); REASON CODE(3221) 11:48 - DGTUV027 MODULE(DGTFSGVR); PROCEDURE(VOSEL) 11:48 - DGTUV028 MESSAGE ID( - ); LAST PANEL(DGTDCSG7) 11:48 - DGTUV029 SERVICE(NONE); FEEDBACK(ELEMENT NAME: TMPSG1) On Fri, Mar 8, 2019 at 11:40 AM Carmen Vitullo wrote: > some if the ISMF messages may have just gone to the ISPF log, you may wnat > to check 7.5 to see if the log is active and if any messages are there , > just a thought > > > Carmen Vitullo > > - Original Message - > > From: "Mark Pace" > To: IBM-MAIN@LISTSERV.UA.EDU > Sent: Friday, March 8, 2019 10:38:05 AM > Subject: Re: ISMF msg > > I'm NOT running HSM. > > On Fri, Mar 8, 2019 at 11:37 AM Mark Pace wrote: > > > I'm running HSM, no started task to look at. > > > > I'll check on my TSO profile. > > > > On Fri, Mar 8, 2019 at 11:22 AM Lizette Koehler > > > wrote: > > > >> Sometime the messages come back to the tso session when using ISMF. > >> > >> Check your TSO PROFILE and make sure you are not suppressing them > >> > >> You could also check the DFHSM STC Task for the messages, they could be > >> there as well. > >> > >> > >> Lizette > >> > >> > >> > -Original Message- > >> > From: IBM Mainframe Discussion List On > >> Behalf Of > >> > Mark Pace > >> > Sent: Friday, March 08, 2019 9:16 AM > >> > To: IBM-MAIN@LISTSERV.UA.EDU > >> > Subject: ISMF msg > >> > > >> > I'm trying to add a new volume to a storage pool. > >> > > >> > When I try to add I get this message on the Panel - SMS RETCODE: > >> 8 > >> > > >> > Searching google it points to ARC0940I - which tells me to look are > >> preceding > >> > ARCxxx messages. I am not seeing any ARC messages on the console or > >> system > >> > log. I thought ARC messages came out of HSM, but I am not running > HSM. > >> > > >> > -- > >> > The postings on this site are my own and don’t necessarily represent > >> > Mainline’s positions or opinions > >> > > >> > Mark D Pace > >> > Senior Systems Engineer > >> > Mainline Information Systems > >> > > >> > > -- > >> > For IBM-MAIN subscribe / signoff / archive access instructions, send > >> email to > >> > lists...@listserv.ua.edu with the message: INFO IBM-MAIN > >> > >> -- > >> For IBM-MAIN subscribe / signoff / archive access instructions, > >> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > >> > > > > > > -- > > The postings on this site are my own and don’t necessarily represent > > Mainline’s positions or opinions > > > >
Re: ISMF msg
Thanks for the pointer. Now to figure out what it is telling me. 11:47 Start of ISPF Log - - - - Session # 1580 --- 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); FUNCTION(VOLUME) 11:48- DGTUV039 SYS3.DFSMS.SCDS 11:48- DGTUV035 RETURN CODE(0008); REASON CODE(6131) 11:48- DGTUV027 MODULE(IGDCSU10); PROCEDURE() 11:48- DGTUV028 MESSAGE ID( - ); LAST PANEL(DGTDCSG7) 11:48- DGTUV029 SERVICE(SMS/CS); FEEDBACK(SUBRET: 0 SUBRSN: 0) 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); FUNCTION(VOLUME) 11:48- DGTUV039 SYS3.DFSMS.SCDS 11:48- DGTUV035 RETURN CODE(0012); REASON CODE(3117) 11:48- DGTUV027 MODULE(DGTFCFAC); PROCEDURE(DGTFCFAC) 11:48- DGTUV028 MESSAGE ID(DGTUC051 - DGTUC051); LAST PANEL(DGTDCSG7) 11:48- DGTUV029 SERVICE(SMS/CS); FEEDBACK(ACCESS, CSI ACCESS MODE = W) 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); FUNCTION(VOLUME) 11:48- DGTUV039 SYS3.DFSMS.SCDS 11:48- DGTUV035 RETURN CODE(0012); REASON CODE(3117) 11:48- DGTUV027 MODULE(DGTFSGP3); PROCEDURE(ACCESS) 11:48- DGTUV028 MESSAGE ID( - ); LAST PANEL(DGTDCSG7) 11:48- DGTUV029 SERVICE(DGTECFAC); FEEDBACK(CALLMOD:DGTFSGSV CALLPROC:PROCOP2P) 11:48 * ISMF ERROR * - DGTUV034 APPLICATION(DGT6 - SG); FUNCTION(VOLUME) 11:48- DGTUV039 SYS3.DFSMS.SCDS 11:48- DGTUV035 RETURN CODE(0012); REASON CODE(3221) 11:48- DGTUV027 MODULE(DGTFSGVR); PROCEDURE(VOSEL) 11:48- DGTUV028 MESSAGE ID( - ); LAST PANEL(DGTDCSG7) 11:48- DGTUV029 SERVICE(NONE); FEEDBACK(ELEMENT NAME: TMPSG1) On Fri, Mar 8, 2019 at 11:40 AM Carmen Vitullo wrote: > some if the ISMF messages may have just gone to the ISPF log, you may wnat > to check 7.5 to see if the log is active and if any messages are there , > just a thought > > > Carmen Vitullo > > - Original Message - > > From: "Mark Pace" > To: IBM-MAIN@LISTSERV.UA.EDU > Sent: Friday, March 8, 2019 10:38:05 AM > Subject: Re: ISMF msg > > I'm NOT running HSM. > > On Fri, Mar 8, 2019 at 11:37 AM Mark Pace wrote: > > > I'm running HSM, no started task to look at. > > > > I'll check on my TSO profile. > > > > On Fri, Mar 8, 2019 at 11:22 AM Lizette Koehler > > > wrote: > > > >> Sometime the messages come back to the tso session when using ISMF. > >> > >> Check your TSO PROFILE and make sure you are not suppressing them > >> > >> You could also check the DFHSM STC Task for the messages, they could be > >> there as well. > >> > >> > >> Lizette > >> > >> > >> > -Original Message- > >> > From: IBM Mainframe Discussion List On > >> Behalf Of > >> > Mark Pace > >> > Sent: Friday, March 08, 2019 9:16 AM > >> > To: IBM-MAIN@LISTSERV.UA.EDU > >> > Subject: ISMF msg > >> > > >> > I'm trying to add a new volume to a storage pool. > >> > > >> > When I try to add I get this message on the Panel - SMS RETCODE: > >> 8 > >> > > >> > Searching google it points to ARC0940I - which tells me to look are > >> preceding > >> > ARCxxx messages. I am not seeing any ARC messages on the console or > >> system > >> > log. I thought ARC messages came out of HSM, but I am not running > HSM. > >> > > >> > -- > >> > The postings on this site are my own and don’t necessarily represent > >> > Mainline’s positions or opinions > >> > > >> > Mark D Pace > >> > Senior Systems Engineer > >> > Mainline Information Systems > >> > > >> > > -- > >> > For IBM-MAIN subscribe / signoff / archive access instructions, send > >> email to > >> > lists...@listserv.ua.edu with the message: INFO IBM-MAIN > >> > >> -- > >> For IBM-MAIN subscribe / signoff / archive access instructions, > >> send email to lists...@listserv.ua.edu
Re: ISMF msg
some if the ISMF messages may have just gone to the ISPF log, you may wnat to check 7.5 to see if the log is active and if any messages are there , just a thought Carmen Vitullo - Original Message - From: "Mark Pace" To: IBM-MAIN@LISTSERV.UA.EDU Sent: Friday, March 8, 2019 10:38:05 AM Subject: Re: ISMF msg I'm NOT running HSM. On Fri, Mar 8, 2019 at 11:37 AM Mark Pace wrote: > I'm running HSM, no started task to look at. > > I'll check on my TSO profile. > > On Fri, Mar 8, 2019 at 11:22 AM Lizette Koehler > wrote: > >> Sometime the messages come back to the tso session when using ISMF. >> >> Check your TSO PROFILE and make sure you are not suppressing them >> >> You could also check the DFHSM STC Task for the messages, they could be >> there as well. >> >> >> Lizette >> >> >> > -Original Message- >> > From: IBM Mainframe Discussion List On >> Behalf Of >> > Mark Pace >> > Sent: Friday, March 08, 2019 9:16 AM >> > To: IBM-MAIN@LISTSERV.UA.EDU >> > Subject: ISMF msg >> > >> > I'm trying to add a new volume to a storage pool. >> > >> > When I try to add I get this message on the Panel - SMS RETCODE: >> 8 >> > >> > Searching google it points to ARC0940I - which tells me to look are >> preceding >> > ARCxxx messages. I am not seeing any ARC messages on the console or >> system >> > log. I thought ARC messages came out of HSM, but I am not running HSM. >> > >> > -- >> > The postings on this site are my own and don’t necessarily represent >> > Mainline’s positions or opinions >> > >> > Mark D Pace >> > Senior Systems Engineer >> > Mainline Information Systems >> > >> > -- >> > For IBM-MAIN subscribe / signoff / archive access instructions, send >> email to >> > lists...@listserv.ua.edu with the message: INFO IBM-MAIN >> >> -- >> For IBM-MAIN subscribe / signoff / archive access instructions, >> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN >> > > > -- > The postings on this site are my own and don’t necessarily represent > Mainline’s positions or opinions > > Mark D Pace > Senior Systems Engineer > Mainline Information Systems > > > > -- The postings on this site are my own and don’t necessarily represent Mainline’s positions or opinions Mark D Pace Senior Systems Engineer Mainline Information Systems -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: ISMF msg
I'm NOT running HSM. On Fri, Mar 8, 2019 at 11:37 AM Mark Pace wrote: > I'm running HSM, no started task to look at. > > I'll check on my TSO profile. > > On Fri, Mar 8, 2019 at 11:22 AM Lizette Koehler > wrote: > >> Sometime the messages come back to the tso session when using ISMF. >> >> Check your TSO PROFILE and make sure you are not suppressing them >> >> You could also check the DFHSM STC Task for the messages, they could be >> there as well. >> >> >> Lizette >> >> >> > -Original Message- >> > From: IBM Mainframe Discussion List On >> Behalf Of >> > Mark Pace >> > Sent: Friday, March 08, 2019 9:16 AM >> > To: IBM-MAIN@LISTSERV.UA.EDU >> > Subject: ISMF msg >> > >> > I'm trying to add a new volume to a storage pool. >> > >> > When I try to add I get this message on the Panel - SMS RETCODE: >> 8 >> > >> > Searching google it points to ARC0940I - which tells me to look are >> preceding >> > ARCxxx messages. I am not seeing any ARC messages on the console or >> system >> > log. I thought ARC messages came out of HSM, but I am not running HSM. >> > >> > -- >> > The postings on this site are my own and don’t necessarily represent >> > Mainline’s positions or opinions >> > >> > Mark D Pace >> > Senior Systems Engineer >> > Mainline Information Systems >> > >> > -- >> > For IBM-MAIN subscribe / signoff / archive access instructions, send >> email to >> > lists...@listserv.ua.edu with the message: INFO IBM-MAIN >> >> -- >> For IBM-MAIN subscribe / signoff / archive access instructions, >> send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN >> > > > -- > The postings on this site are my own and don’t necessarily represent > Mainline’s positions or opinions > > Mark D Pace > Senior Systems Engineer > Mainline Information Systems > > > > -- The postings on this site are my own and don’t necessarily represent Mainline’s positions or opinions Mark D Pace Senior Systems Engineer Mainline Information Systems -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: ISMF msg
I'm running HSM, no started task to look at. I'll check on my TSO profile. On Fri, Mar 8, 2019 at 11:22 AM Lizette Koehler wrote: > Sometime the messages come back to the tso session when using ISMF. > > Check your TSO PROFILE and make sure you are not suppressing them > > You could also check the DFHSM STC Task for the messages, they could be > there as well. > > > Lizette > > > > -Original Message- > > From: IBM Mainframe Discussion List On > Behalf Of > > Mark Pace > > Sent: Friday, March 08, 2019 9:16 AM > > To: IBM-MAIN@LISTSERV.UA.EDU > > Subject: ISMF msg > > > > I'm trying to add a new volume to a storage pool. > > > > When I try to add I get this message on the Panel - SMS RETCODE: > 8 > > > > Searching google it points to ARC0940I - which tells me to look are > preceding > > ARCxxx messages. I am not seeing any ARC messages on the console or > system > > log. I thought ARC messages came out of HSM, but I am not running HSM. > > > > -- > > The postings on this site are my own and don’t necessarily represent > > Mainline’s positions or opinions > > > > Mark D Pace > > Senior Systems Engineer > > Mainline Information Systems > > > > -- > > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to > > lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- The postings on this site are my own and don’t necessarily represent Mainline’s positions or opinions Mark D Pace Senior Systems Engineer Mainline Information Systems -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: ISMF msg
Yes, it was initialized as SMS and it's online. INIT UNIT(B052) VOLID(TTMP02) - NOVFY DEVTYPE(3390) PRG STGR VTOC(0,1,104) INDEX(7,0,45) UNIT TYPE STATUSVOLSER VOLSTATE SS B052 3390 O TTMP02 PRIV/RSDNT 0 On Fri, Mar 8, 2019 at 11:19 AM Carmen Vitullo wrote: > is the volume online to the system you are trying to add? > was init INIT'd as SMS ? > > > > Carmen Vitullo > > - Original Message - > > From: "Mark Pace" > To: IBM-MAIN@LISTSERV.UA.EDU > Sent: Friday, March 8, 2019 10:15:41 AM > Subject: ISMF msg > > I'm trying to add a new volume to a storage pool. > > When I try to add I get this message on the Panel - SMS RETCODE: 8 > > Searching google it points to ARC0940I - which tells me to look are > preceding ARCxxx messages. I am not seeing any ARC messages on the console > or system log. I thought ARC messages came out of HSM, but I am not > running HSM. > > -- > The postings on this site are my own and don’t necessarily represent > Mainline’s positions or opinions > > Mark D Pace > Senior Systems Engineer > Mainline Information Systems > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- The postings on this site are my own and don’t necessarily represent Mainline’s positions or opinions Mark D Pace Senior Systems Engineer Mainline Information Systems -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: ISMF msg
Sometime the messages come back to the tso session when using ISMF. Check your TSO PROFILE and make sure you are not suppressing them You could also check the DFHSM STC Task for the messages, they could be there as well. Lizette > -Original Message- > From: IBM Mainframe Discussion List On Behalf Of > Mark Pace > Sent: Friday, March 08, 2019 9:16 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: ISMF msg > > I'm trying to add a new volume to a storage pool. > > When I try to add I get this message on the Panel - SMS RETCODE: 8 > > Searching google it points to ARC0940I - which tells me to look are preceding > ARCxxx messages. I am not seeing any ARC messages on the console or system > log. I thought ARC messages came out of HSM, but I am not running HSM. > > -- > The postings on this site are my own and don’t necessarily represent > Mainline’s positions or opinions > > Mark D Pace > Senior Systems Engineer > Mainline Information Systems > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: ISMF msg
is the volume online to the system you are trying to add? was init INIT'd as SMS ? Carmen Vitullo - Original Message - From: "Mark Pace" To: IBM-MAIN@LISTSERV.UA.EDU Sent: Friday, March 8, 2019 10:15:41 AM Subject: ISMF msg I'm trying to add a new volume to a storage pool. When I try to add I get this message on the Panel - SMS RETCODE: 8 Searching google it points to ARC0940I - which tells me to look are preceding ARCxxx messages. I am not seeing any ARC messages on the console or system log. I thought ARC messages came out of HSM, but I am not running HSM. -- The postings on this site are my own and don’t necessarily represent Mainline’s positions or opinions Mark D Pace Senior Systems Engineer Mainline Information Systems -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
ISMF msg
I'm trying to add a new volume to a storage pool. When I try to add I get this message on the Panel - SMS RETCODE: 8 Searching google it points to ARC0940I - which tells me to look are preceding ARCxxx messages. I am not seeing any ARC messages on the console or system log. I thought ARC messages came out of HSM, but I am not running HSM. -- The postings on this site are my own and don’t necessarily represent Mainline’s positions or opinions Mark D Pace Senior Systems Engineer Mainline Information Systems -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
