Re: MIH Question
I agree on both points--if there's a requirement it should be documented, and we don't have any MIH values coded for our DS8870. We still have some in there for tape, which I think is still recommended even with the TS7700 VTSes. I do recall in the past having to put in temporary MIH values for DASD devices while migrating from one DASD box to another. Always made me a little nervous about the actual migration: minute-long I/Os seem like they could result in a less than fully non-disruptive migration. Scott Chapman On Thu, 20 Feb 2014 10:32:24 -0500, Brian France b...@psu.edu wrote: We did this so long ago I disremember a lot of it. BUT I can state that there are no MIH values coded in our IOS member. Just Hyperpav... Oh and we are a basic sysplex shop On 2/20/2014 10:08 AM, Lizette Koehler wrote: There should be something documented in the manuals for your DS8870 to state what they want. Or you can ask you friendly IBMer. Lizette -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Dazzo, Matt Sent: Thursday, February 20, 2014 7:50 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: MIH Question We recently migrated from a IBM shark dasd device to a IBM DS8870 device, we are zos 1.13 monoplex shop. In the IECIOS000 member was the following entry for the shark devices MIH DEV=(2000-2BFF),TIME=02:00. Is there a way to determine if an entry is needed and what it should be for the new devices? The old entry was added before my time and I do not know why. Thanks Matt -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- Brian W. France Systems Administrator (Mainframe) Pennsylvania State University Administrative Information Services - Infrastructure/SYSARC Rm 25 Shields Bldg., University Park, Pa. 16802 814-863-4739 b...@psu.edu To make an apple pie from scratch, you must first invent the universe. Carl Sagan -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
MIH Question
We recently migrated from a IBM shark dasd device to a IBM DS8870 device, we are zos 1.13 monoplex shop. In the IECIOS000 member was the following entry for the shark devices MIH DEV=(2000-2BFF),TIME=02:00. Is there a way to determine if an entry is needed and what it should be for the new devices? The old entry was added before my time and I do not know why. Thanks Matt -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: MIH Question
Try here: http://rumba.kbm1.com/ Al Staller | Z Systems Programmer | KBM Group | (Tel) 972 664-3565 | allan.stal...@kbmg.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Dazzo, Matt Sent: Thursday, February 20, 2014 8:50 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: MIH Question We recently migrated from a IBM shark dasd device to a IBM DS8870 device, we are zos 1.13 monoplex shop. In the IECIOS000 member was the following entry for the shark devices MIH DEV=(2000-2BFF),TIME=02:00. Is there a way to determine if an entry is needed and what it should be for the new devices? The old entry was added before my time and I do not know why. Thanks Matt -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: MIH Question
Oops! Wrong message replied to. 'sorry bout that folks Al Staller | Z Systems Programmer | KBM Group | (Tel) 972 664-3565 | allan.stal...@kbmg.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Staller, Allan Sent: Thursday, February 20, 2014 8:56 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: MIH Question Try here: http://rumba.kbm1.com/ Al Staller | Z Systems Programmer | KBM Group | (Tel) 972 664-3565 | allan.stal...@kbmg.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Dazzo, Matt Sent: Thursday, February 20, 2014 8:50 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: MIH Question We recently migrated from a IBM shark dasd device to a IBM DS8870 device, we are zos 1.13 monoplex shop. In the IECIOS000 member was the following entry for the shark devices MIH DEV=(2000-2BFF),TIME=02:00. Is there a way to determine if an entry is needed and what it should be for the new devices? The old entry was added before my time and I do not know why. Thanks Matt -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: MIH Question
There should be something documented in the manuals for your DS8870 to state what they want. Or you can ask you friendly IBMer. Lizette -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Dazzo, Matt Sent: Thursday, February 20, 2014 7:50 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: MIH Question We recently migrated from a IBM shark dasd device to a IBM DS8870 device, we are zos 1.13 monoplex shop. In the IECIOS000 member was the following entry for the shark devices MIH DEV=(2000-2BFF),TIME=02:00. Is there a way to determine if an entry is needed and what it should be for the new devices? The old entry was added before my time and I do not know why. Thanks Matt -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: MIH Question
Staller, Allan wrote: Try here: http://rumba.kbm1.com/ Oops! Wrong message replied to. 'sorry bout that folks Too many Macarena dances with Teqiula? ;-D ;-D There was an emulator product called 'Rumba'. I remembered the good old days when I have to evaluate that thing. Groete / Greetings Elardus Engelbrecht -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: MIH Question
We did this so long ago I disremember a lot of it. BUT I can state that there are no MIH values coded in our IOS member. Just Hyperpav... Oh and we are a basic sysplex shop On 2/20/2014 10:08 AM, Lizette Koehler wrote: There should be something documented in the manuals for your DS8870 to state what they want. Or you can ask you friendly IBMer. Lizette -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Dazzo, Matt Sent: Thursday, February 20, 2014 7:50 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: MIH Question We recently migrated from a IBM shark dasd device to a IBM DS8870 device, we are zos 1.13 monoplex shop. In the IECIOS000 member was the following entry for the shark devices MIH DEV=(2000-2BFF),TIME=02:00. Is there a way to determine if an entry is needed and what it should be for the new devices? The old entry was added before my time and I do not know why. Thanks Matt -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- Brian W. France Systems Administrator (Mainframe) Pennsylvania State University Administrative Information Services - Infrastructure/SYSARC Rm 25 Shields Bldg., University Park, Pa. 16802 814-863-4739 b...@psu.edu To make an apple pie from scratch, you must first invent the universe. Carl Sagan -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
