Re: Move volcat to non sms volume
Check you ACS routines. Most Installations have a "escape clause" that allows the ACS rotuines to be overridden. Otherwise, use dfDSS. COPY DSN(.) NSC NMC BYPASSACS(**) HTH, -Original Message- From: IBM Mainframe Discussion List On Behalf Of Gadi Ben-Avi Sent: Sunday, May 24, 2020 5:55 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Move volcat to non sms volume [CAUTION: This Email is from outside the Organization. Unless you trust the sender, Don’t click links or open attachments as it may be a Phishing email, which can steal your Information and compromise your Computer.] Thanks, but that doesn't work. What did work was allocating the volcat on the volume I wanted to use. and then using the intoempty paramters in the import. Gadi -Original Message- From: IBM Mainframe Discussion List On Behalf Of Joe Monk Sent: Sunday, May 24, 2020 12:17 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Move volcat to non sms volume By using the VOLUMES keyword on the IMPORT, and specifying a NON-SMS managed volume... https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ibm.com%2Fsupport%2Fpages%2Fhow-move-volcat-new-volumedata=02%7C01%7Callan.staller%40HCL.COM%7C3ddd5d0b8b0a4360ee7508d7ffd0fbf0%7C189de737c93a4f5a8b686f4ca9941912%7C0%7C0%7C637259145389967562sdata=z4TNbWtaosv2SKsqeNdj2rDA7lrbT7GhbzQNqC0Tra0%3Dreserved=0 Joe On Sun, May 24, 2020 at 2:30 AM Gadi Ben-Avi wrote: > Hi, > Our volcat (SYS1.VOLCAT.VGENERAL) was allocated on an SMS managed volume. > We would like to move it to a Non SMS managed volume. > > The way I found was to export it and then import. > How do I tell IMPORT to allocate it on a non SMS managed volume, and > not on the storage class it was exported from? > > Thanks > > Gadi > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Email secured by Check Point -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ::DISCLAIMER:: The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Move volcat to non sms volume
I think there is no important difference between moving VOLCAT and moving regular VSAM file. For VSAM I would use ADRDSSU with RESTORE IMPORT NMC NSC. BTW: I have system clones available on demand. You want clone of whole system - voila. I love it! Almost all possible operations can be tested safely on such clone. Obviously the clone has no access to original volumes, UCBs are unavailable. Even mistaken VARY dev ONLINE is not possible. -- Radoslaw Skorupka Lodz, Poland W dniu 24.05.2020 o 12:55, Gadi Ben-Avi pisze: Thanks, but that doesn't work. What did work was allocating the volcat on the volume I wanted to use. and then using the intoempty paramters in the import. Gadi -Original Message- From: IBM Mainframe Discussion List On Behalf Of Joe Monk Sent: Sunday, May 24, 2020 12:17 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Move volcat to non sms volume By using the VOLUMES keyword on the IMPORT, and specifying a NON-SMS managed volume... https://www.ibm.com/support/pages/how-move-volcat-new-volume Joe On Sun, May 24, 2020 at 2:30 AM Gadi Ben-Avi wrote: Hi, Our volcat (SYS1.VOLCAT.VGENERAL) was allocated on an SMS managed volume. We would like to move it to a Non SMS managed volume. The way I found was to export it and then import. How do I tell IMPORT to allocate it on a non SMS managed volume, and not on the storage class it was exported from? Thanks Gadi == Jeśli nie jesteś adresatem tej wiadomości: - powiadom nas o tym w mailu zwrotnym (dziękujemy!), - usuń trwale tę wiadomość (i wszystkie kopie, które wydrukowałeś lub zapisałeś na dysku). Wiadomość ta może zawierać chronione prawem informacje, które może wykorzystać tylko adresat.Przypominamy, że każdy, kto rozpowszechnia (kopiuje, rozprowadza) tę wiadomość lub podejmuje podobne działania, narusza prawo i może podlegać karze. mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950 Warszawa,www.mBank.pl, e-mail: kont...@mbank.pl. Sąd Rejonowy dla m. st. Warszawy XII Wydział Gospodarczy Krajowego Rejestru Sądowego, KRS 025237, NIP: 526-021-50-88. Kapitał zakładowy (opłacony w całości) według stanu na 01.01.2020 r. wynosi 169.401.468 złotych. If you are not the addressee of this message: - let us know by replying to this e-mail (thank you!), - delete this message permanently (including all the copies which you have printed out or saved). This message may contain legally protected information, which may be used exclusively by the addressee.Please be reminded that anyone who disseminates (copies, distributes) this message or takes any similar action, violates the law and may be penalised. mBank S.A. with its registered office in Warsaw, ul. Senatorska 18, 00-950 Warszawa,www.mBank.pl, e-mail: kont...@mbank.pl. District Court for the Capital City of Warsaw, 12th Commercial Division of the National Court Register, KRS 025237, NIP: 526-021-50-88. Fully paid-up share capital amounting to PLN 169.401.468 as at 1 January 2020. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Move volcat to non sms volume
Thanks, but that doesn't work. What did work was allocating the volcat on the volume I wanted to use. and then using the intoempty paramters in the import. Gadi -Original Message- From: IBM Mainframe Discussion List On Behalf Of Joe Monk Sent: Sunday, May 24, 2020 12:17 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Move volcat to non sms volume By using the VOLUMES keyword on the IMPORT, and specifying a NON-SMS managed volume... https://www.ibm.com/support/pages/how-move-volcat-new-volume Joe On Sun, May 24, 2020 at 2:30 AM Gadi Ben-Avi wrote: > Hi, > Our volcat (SYS1.VOLCAT.VGENERAL) was allocated on an SMS managed volume. > We would like to move it to a Non SMS managed volume. > > The way I found was to export it and then import. > How do I tell IMPORT to allocate it on a non SMS managed volume, and > not on the storage class it was exported from? > > Thanks > > Gadi > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Email secured by Check Point -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Move volcat to non sms volume
By using the VOLUMES keyword on the IMPORT, and specifying a NON-SMS managed volume... https://www.ibm.com/support/pages/how-move-volcat-new-volume Joe On Sun, May 24, 2020 at 2:30 AM Gadi Ben-Avi wrote: > Hi, > Our volcat (SYS1.VOLCAT.VGENERAL) was allocated on an SMS managed volume. > We would like to move it to a Non SMS managed volume. > > The way I found was to export it and then import. > How do I tell IMPORT to allocate it on a non SMS managed volume, and not > on the storage class it was exported from? > > Thanks > > Gadi > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Move volcat to non sms volume
Hi, Our volcat (SYS1.VOLCAT.VGENERAL) was allocated on an SMS managed volume. We would like to move it to a Non SMS managed volume. The way I found was to export it and then import. How do I tell IMPORT to allocate it on a non SMS managed volume, and not on the storage class it was exported from? Thanks Gadi -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
