imple little routing"
Lizette
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Gilson Cesar de Oliveira
> Sent: Thursday, August 24, 2017 6:32 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: Route in
m: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
> Behalf Of Gilson Cesar de Oliveira
> Sent: Thursday, August 24, 2017 6:32 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Re: Route in Jes2 for more than one node
>
>
> Paul:
>
>
How about $G R,OUT?
https://www.ibm.com/support/knowledgecenter/SSLTBW_2.2.0/com.ibm.zos.v2r2.hasa200/ranrjo.htm
To route normal output for a job at another node to an alternate location.
D=Specifies a destination for a piece of output. Indicates that output sent
to the specified destinations
; but I forget how I did it). The captured job
output could then be IEBGENER'd to any LPARs via XEQ's. This would fix
the "Route in Jes2 for more than one node" problem, methinks.
Just my ha'penny.
Cheers, CP
On 25/08/2017 04:07, CM Poncelet wrote:
> I have not checked it (no access t
I have not checked it (no access to a mainframe since I retired, in
2013) - but you could try coding in your JCL either:
"/*ROUTE XEQ (,)"
or "/*JOBPARM SYSAFF=(,)"
or even
"/*ROUTE XEQ "
"/*ROUTE XEQ "
(etc.)
... but no guarantee that any of these will actually work
Cheers, CP
On 2017-08-24, at 19:31, Gilson Cesar de Oliveira wrote:
>
> The answer is Yes but, and always there is a BUT, the user don't want to
> change anything in JCL, so the option is to route the sysouts using Jes2
> command and I could not see a way to do it ($Rall) for more than one node.
>
>
Paul:
The answer is Yes but, and always there is a BUT, the user don't want to
change anything in JCL, so the option is to route the sysouts using Jes2
command and I could not see a way to do it ($Rall) for more than one node.
If you have an exit where you can enable more than one node to
On 2017-08-24, at 17:30, Gilson Cesar de Oliveira wrote:
>
> We have to route some sysouts in the JES2 spool for two different nodes. Is
> there a way to do it automatically?
>
Will the JCL OUTPUT statement do that for you?
--gil
Dear list:
We have to route some sysouts in the JES2 spool for two different nodes. Is
there a way to do it automatically?
Regards,
Gilson
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
