Re: z13 Central Storage [EXTERNAL]
Don't you just hate when that happens. Thanks.. Paul Feller GTS Mainframe Technical Support -Original Message- From: IBM Mainframe Discussion List On Behalf Of Elaine Beal Sent: Thursday, July 30, 2020 9:04 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z13 Central Storage [EXTERNAL] Well that didn't take long... the dreaded comma... Thanks much! -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z13 Central Storage [EXTERNAL]
Well that didn't take long... the dreaded comma... Thanks much! -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z13 Central Storage [EXTERNAL]
Paul, Thank you. At one point I had gotten in to the system completion codes, not wait states. That could have sent me down the rabbit hole :) I had checked my page dsn's, this is DR and they are replicated. However, we never get any messages on the console. I will check the config for the page datasets again. Elaine -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z13 Central Storage [EXTERNAL]
Elaine, did you get the wait code during or after the IPL of the lpar. Unless I'm looking at the wrong doc a wait code of 03C indicates you had an issue with ASM. The other thing to consider depending on the size of your lpar in terms of software stack 3 gig may not be enough. Depending on the level of z/OS there have been some changes in central storage management and 3 gig may work but z/OS would be happier with 4 gig and even up to 8 gig for the "default" size. 03C Explanation: The auxiliary storage manager (ASM) found that not enough auxiliary storage space is available for system operation: During IPL Either the required number of page data sets was not specified, or ASM has detected a problem with a required page data set. After IPL ASM has run out of usable auxiliary storage for the pageable link pack area (PLPA), common or local page data sets, and any storage-class memory (SCM). A reason code identifies the error: Code Explanation 00 The cause of the error cannot be determined because of an error in recovery processing. 01 Insufficient paging space. All local paging data sets are full, and there is no available SCM. 02 The PLPA data set is full, SCM; is full, and the common data set is unavailable. 03 The common data set is full, SCM is full, and the PLPA data set is unavailable. 04 SCM is full, and the PLPA and common data sets are unavailable. Thanks.. Paul Feller GTS Mainframe Technical Support From: IBM Mainframe Discussion List on behalf of Jackson, Rob Sent: Wednesday, July 29, 2020 6:46 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z13 Central Storage [EXTERNAL] Elaine, I suspect what you are interested in seeing is found here: Single Object Operations; select CPC; select Operational Customization; select Storage Information. "Storage Information This window displays: Information about storage installed and allocated for the base system. Information about central storage and expanded storage allocated for logical partitions currently activated on the base system." If you don't see it, you need to check your SE permissions. First Horizon Bank Mainframe Technical Support -Original Message- From: IBM Mainframe Discussion List On Behalf Of Mark Jacobs Sent: Wednesday, July 29, 2020 6:55 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z13 Central Storage [External Email. Exercise caution when clicking links or opening attachments.] Take a look at your reset profile. Total storage on the z13 should show up there. Mark Jacobs Sent from ProtonMail, Swiss-based encrypted email. GPG Public Key - https://urldefense.proofpoint.com/v2/url?u=https-3A__api.protonmail.ch_pks_lookup-3Fop-3Dget-26search-3Dmarkjacobs-40protonmail.com=DwIGaQ=9g4MJkl2VjLjS6R4ei18BA=eUhu3PeeWy6RTndlJVKembFjFsvwCa8eeU_gm45NyOc=06sr6fRYTXAqs8Z7B7me9hOyQulB83SGljzOzQNO8HE=E5PjETynrQjXrqiGd7YXx8M4IoezrvmUi6RfvmV_A0s= ‐‐‐ Original Message ‐‐‐ On Wednesday, July 29, 2020 6:41 PM, Elaine Beal wrote: > Is there a way to see total central storage on a z13 HMC? > I can see it by selecting individual LPARs but am interested in an overall > view. > I have 11 LPARs, 9 deactivated, I have activated and IPLd several of the 6GB > defined LPARs multiple times earlier this year. > All 9 deactivated again I'm trying to IPL a 3GB LPAR and getting an > -03C wait state- No central storage frames were available to resolve a page > fault when the unit of work was running disabled for interrupts. > Where's my central storage? > Thanks, > Elaine > > -- > -- > -- > -- > -- > -- > -- > -- > > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Confidentiality notice: This e-mail message, including any attachments, may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution, or copying of this e-mail message is strictly prohibited. If you have
Re: z13 Central Storage
Elaine, I suspect what you are interested in seeing is found here: Single Object Operations; select CPC; select Operational Customization; select Storage Information. "Storage Information This window displays: Information about storage installed and allocated for the base system. Information about central storage and expanded storage allocated for logical partitions currently activated on the base system." If you don't see it, you need to check your SE permissions. First Horizon Bank Mainframe Technical Support -Original Message- From: IBM Mainframe Discussion List On Behalf Of Mark Jacobs Sent: Wednesday, July 29, 2020 6:55 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z13 Central Storage [External Email. Exercise caution when clicking links or opening attachments.] Take a look at your reset profile. Total storage on the z13 should show up there. Mark Jacobs Sent from ProtonMail, Swiss-based encrypted email. GPG Public Key - https://api.protonmail.ch/pks/lookup?op=get=markjac...@protonmail.com ‐‐‐ Original Message ‐‐‐ On Wednesday, July 29, 2020 6:41 PM, Elaine Beal wrote: > Is there a way to see total central storage on a z13 HMC? > I can see it by selecting individual LPARs but am interested in an overall > view. > I have 11 LPARs, 9 deactivated, I have activated and IPLd several of the 6GB > defined LPARs multiple times earlier this year. > All 9 deactivated again I'm trying to IPL a 3GB LPAR and getting an > -03C wait state- No central storage frames were available to resolve a page > fault when the unit of work was running disabled for interrupts. > Where's my central storage? > Thanks, > Elaine > > -- > -- > -- > -- > -- > -- > -- > -- > > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Confidentiality notice: This e-mail message, including any attachments, may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution, or copying of this e-mail message is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this e-mail message from your computer. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z13 Central Storage
Take a look at your reset profile. Total storage on the z13 should show up there. Mark Jacobs Sent from ProtonMail, Swiss-based encrypted email. GPG Public Key - https://api.protonmail.ch/pks/lookup?op=get=markjac...@protonmail.com ‐‐‐ Original Message ‐‐‐ On Wednesday, July 29, 2020 6:41 PM, Elaine Beal wrote: > Is there a way to see total central storage on a z13 HMC? > I can see it by selecting individual LPARs but am interested in an overall > view. > I have 11 LPARs, 9 deactivated, I have activated and IPLd several of the 6GB > defined LPARs multiple times earlier this year. > All 9 deactivated again I'm trying to IPL a 3GB LPAR and getting an -03C wait > state- > No central storage frames were available to resolve a page fault when the > unit of work was running disabled for interrupts. > Where's my central storage? > Thanks, > Elaine > > > > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
z13 Central Storage
Is there a way to see total central storage on a z13 HMC? I can see it by selecting individual LPARs but am interested in an overall view. I have 11 LPARs, 9 deactivated, I have activated and IPLd several of the 6GB defined LPARs multiple times earlier this year. All 9 deactivated again I'm trying to IPL a 3GB LPAR and getting an -03C wait state- No central storage frames were available to resolve a page fault when the unit of work was running disabled for interrupts. Where's my central storage? Thanks, Elaine -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
