Re: [Ifeffit] Problems with gnuplot graphics on Mac OS 10.12.1

2016-12-09 Thread Bruce Ravel

On 12/08/2016 10:19 PM, Paul Fons wrote:

Hi All,

I just wanted to give an update to my earlier problems with the
mysterious gnuplot errors. After editing the file Matt mentioned
earlier, I decided to uninstall and install demeter to no avail. I
then realized that I had been relying on the latest version of
xquartz (the x11 system) and installed x11 using macports.  After a
bit of trouble with installation (I had to break the installation
into pieces — but this is a typical macports problem), the x11
installation completed and athena worked fine. Thus my conclusion is
that there was some sort of weird interference between x11
subsystems.  In any case, all is well now.


Hi Paul,

Glad it worked out.  I don't quite understand what happened.  If you 
have any suggestions for what I can add to the Mac installation 
instructions to help the next poor soul, that would be great.


http://bruceravel.github.io/demeter/documents/SinglePage/macinstallation.html

B


--
 Bruce Ravel   bra...@bnl.gov

 National Institute of Standards and Technology
 Synchrotron Science Group at NSLS-II
 Building 743, Room 114
 Upton NY, 11973

 Homepage:http://bruceravel.github.io/home/
 Software:https://github.com/bruceravel
 Demeter: http://bruceravel.github.io/demeter/
___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit


[Ifeffit] Problems with gnuplot graphics on Mac OS 10.12.1

2016-12-08 Thread Paul Fons
Hi All,

  I just wanted to give an update to my earlier problems with the mysterious 
gnuplot errors. After editing the file Matt mentioned earlier, I decided to 
uninstall and install demeter to no avail. I then realized that I had been 
relying on the latest version of xquartz (the x11 system) and installed x11 
using macports.  After a bit of trouble with installation (I had to break the 
installation into pieces — but this is a typical macports problem), the x11 
installation completed and athena worked fine. Thus my conclusion is that there 
was some sort of weird interference between x11 subsystems.  In any case, all 
is well now.
___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit


Re: [Ifeffit] Problems with gnuplot graphics on Mac OS 10.12.1

2016-11-29 Thread Bruce Ravel


Hi Paul,

I have a hard time understanding how that happens, but I have a couple 
ideas.  Let's look into the simpler one first.


In the installation location of Demeter, there is a file called 
lib/Demeter/templates/plot/gnuplot/marker.tmpl


It should look exactly like this:

https://github.com/bruceravel/demeter/blob/master/lib/Demeter/templates/plot/gnuplot/marker.tmpl

Could you check to verify that that file has not been altered in any way?

If that file is ok, then we'll dig deeper.

B


On 11/28/2016 02:35 PM, Paul Fons wrote:

Hi All,
  I have installed demeter using Macports on 10.12.1 and while
hephaestus seems to run normally, athena has some trouble with graphics.
 The usual athena perl based panel shows up just fine, but upon loading
some data, there is always an error when gnuplot is invoked to plot
graphics (as reproduced below).  It would seem that the command “set” is
missing the first letter.  Does anyone have a suggestion as to what to
check to fix this?


Axion:perl5.24 $ use_macports.sh athena

gnuplot> et label '{/Symbol \305}' at 400.7,853.0387 center front
textcolor ls 12
 ^
 line 0: invalid command


___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit




--
 Bruce Ravel   bra...@bnl.gov

 National Institute of Standards and Technology
 Synchrotron Science Group at NSLS-II
 Building 743, Room 114
 Upton NY, 11973

 Homepage:http://bruceravel.github.io/home/
 Software:https://github.com/bruceravel
 Demeter: http://bruceravel.github.io/demeter/
___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit


[Ifeffit] Problems with gnuplot graphics on Mac OS 10.12.1

2016-11-28 Thread Paul Fons
Hi All,
  I have installed demeter using Macports on 10.12.1 and while hephaestus seems 
to run normally, athena has some trouble with graphics.  The usual athena perl 
based panel shows up just fine, but upon loading some data, there is always an 
error when gnuplot is invoked to plot graphics (as reproduced below).  It would 
seem that the command “set” is missing the first letter.  Does anyone have a 
suggestion as to what to check to fix this?


Axion:perl5.24 $ use_macports.sh athena

gnuplot> et label '{/Symbol \305}' at 400.7,853.0387 center front textcolor 
ls 12
 ^
 line 0: invalid command___
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
Unsubscribe: http://millenia.cars.aps.anl.gov/mailman/options/ifeffit