On Wed, Sep 20, 2023 at 12:40 PM Ville Syrjälä
wrote:
>
> On Wed, Sep 20, 2023 at 11:47:05AM -0700, Manasi Navare wrote:
> > Hi Ville,
> >
> > Quick question here on the use case and the trigger for the LRR case
> > which is within VRR range.
> > Could this perhaps be used if we had a virtual
On Wed, Sep 20, 2023 at 11:47:05AM -0700, Manasi Navare wrote:
> Hi Ville,
>
> Quick question here on the use case and the trigger for the LRR case
> which is within VRR range.
> Could this perhaps be used if we had a virtual mode say 40Hz that now
> falls in the VRR range (30 -120Hz) that is
>
Hi Ville,
Quick question here on the use case and the trigger for the LRR case
which is within VRR range.
Could this perhaps be used if we had a virtual mode say 40Hz that now
falls in the VRR range (30 -120Hz) that is
exposed through the connector mode list and then if we do a modest to
40Hz
Thanks Ville for the respin, the changes look good now.
Reviewed-by: Manasi Navare
Manasi
On Fri, Sep 15, 2023 at 3:38 AM Ville Syrjala
wrote:
>
> From: Ville Syrjälä
>
> Implement low refresh rate (LRR) where we change the vblank
> length by hand as requested, but otherwise keep the timing
From: Ville Syrjälä
Implement low refresh rate (LRR) where we change the vblank
length by hand as requested, but otherwise keep the timing
generator running in non-VRR mode (ie. fixed refresh rate).
The panel itself must support VRR for this to work, and
only TGL+ has the double buffred
