On Mon, Sep 27, 2010 at 01:11:02AM +, Nasa wrote:
Looking at your info it looks like your hsync is 30.3 (am I reading
that right?), which is lower than the default set by the driver -- which
is 31. I know this because I tried a host of modelines in the monitor
section (a file in
- The Fungi fu...@yuggoth.org wrote:
On Mon, Sep 27, 2010 at 01:11:02AM +, Nasa wrote:
Looking at your info it looks like your hsync is 30.3 (am I reading
that right?), which is lower than the default set by the driver --
which
is 31. I know this because I tried a host of
- Felix Miata mrma...@earthlink.net wrote:
On 2010/08/26 21:56 (GMT-0400) Felix Miata composed:
Future Intel/800x480 Googlers might welcome finding this thread
extended,
preferably to successful conclusion.
--
I wish I could provide a successful completion -- but not so far...
I'm
On 2010/09/26 19:21 (GMT) Nasa composed:
I'm starting to look at the code and see if I can hardwire support
for vertical refresh rates greater than 60.0 (haven't figured that
out yet)
It's rare for a flat panel display to either need refresh higher than 60,
or product better performance using
- Felix Miata mrma...@earthlink.net wrote:
On 2010/09/26 20:09 (GMT) Nasa composed:
I should be a little more clear -- to create a modeline for a
resolution
of 800x400
Are all your attempts so lax in typing accuracy? According to
http://www.lilliput.cn/EBY701-NP.html you should
On Mon, Sep 27, 2010 at 12:26:21AM +, Nasa wrote:
800x480 is what I am/should be attempting to get...
[...]
I apologize for not following the thread too closely but if you're
just looking for working 800x...@60 timings, this is the native
resolution of the panel on my Asus EEE PC and xrandr
- The Fungi fu...@yuggoth.org wrote:
On Mon, Sep 27, 2010 at 12:26:21AM +, Nasa wrote:
800x480 is what I am/should be attempting to get...
[...]
I apologize for not following the thread too closely but if you're
just looking for working 800x...@60 timings, this is the native
On 2010/08/26 21:56 (GMT-0400) Felix Miata composed:
Future Intel/800x480 Googlers might welcome finding this thread extended,
preferably to successful conclusion.
--
The wise are known for their understanding, and pleasant
words are persuasive. Proverbs 16:21 (New Living Translation)
Team
- Alan W. Irwin ir...@beluga.phys.uvic.ca wrote:
On 2010-08-26 10:47- Nasa wrote:
Hi,
I am trying to configure a rather obscure resolution (800x480) which
is the
native resolution for my monitor. The monitor doesn't provide EDID
or DDC
information (it's connected over
On 2010-08-26 17:37- Nasa wrote:
- Alan W. Irwin ir...@beluga.phys.uvic.ca wrote:
On 2010-08-26 10:47- Nasa wrote:
Hi,
I am trying to configure a rather obscure resolution (800x480) which
is the
native resolution for my monitor. The monitor doesn't provide EDID
or DDC
On 2010-08-26 18:40- Nasa wrote:
- Alan W. Irwin ir...@beluga.phys.uvic.ca wrote:
[...]I have assumed above that the horizontal frequency limits have been
set correctly for your particular monitor. That is not always the
case. Check your monitor manual for the correct vertical and
On 2010/08/26 23:14 (GMT) Nasa composed:
Given Meego's setup where is the appropriate place to put the xrandr
commands? I was confused on this point when I tried that before...
I know nothing about Meego other than that you are using it. :-p
X seems to be started from 3 files in
12 matches
Mail list logo
