Re: [Intel-gfx] Problem Intel i915 driver, i3 2010T, HDMI output modes problems
Hi Paulo, sorry for not getting back you sooner... your email was here on my to do list Could you please report this issue on bugs.freedesktop.org attaching this xrandr verbose info and also dmesg xorg log and confs? Also, Is it possible to test it without the AV receiver? I think you wont see a similar behaviour? Maybe AV receiver is meessing up EDID info when booting, but it would be strange to see x reporting a freq and receiver another one anyway. The interlacing issue is also possible, so as much info you can provide us the best! I also think that the workaround Andy suggested will work in your case, but I would like to get it really fixed. Rodrigo. On Mon, Jan 16, 2012 at 8:09 PM, Andy Burns xorg.li...@burns.me.uk wrote: [apologies for munged threading, I subscribed after the original message was sent] paulo louro wrote: When starting ubuntu without the AV receiver or the TV being on, the xorg start with a resolution of 720x576. Have you tried forcing an initial mode in the Monitor section of your xorg.conf? Option PreferredMode whatever presumably whatever is something like 1920x1080x60.0 in your case ... ___ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Rodrigo Vivi Blog: http://blog.vivi.eng.br GPG: 0x905BE242 @ wwwkeys.pgp.net ___ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] Problem Intel i915 driver, i3 2010T, HDMI output modes problems
On Tue, Jan 03, 2012 at 08:52:39PM +, paulo louro wrote: Dear intel-gfx developers. After spending a huge amount of time searching for a solution for me problem and haven't been able to find one, i decided to send a email to this mailing list hoping someone can help me or point me on the right direction. Hardware: Motherboard : ASRock H67M-GEProcessor: Intel Core i3 2010T AV Receiver: Onkyo TX-NR808TV: Panasonic 50VT20 Software: Ubuntu 11.10 with xorg-edgers ppa. Problem: When starting ubuntu without the AV receiver or the TV being on, the xorg start with a resolution of 720x576. When turning the TV on and selecting the AV-Receiver. The AV receiver reports that there is a signal but noting is display on the TV, by using my receiver Display/Information menu i can see im receiving a signal with 1920x1080i@120hz. The receiver pass's this direct to the television and ofc since its 120hz it cant be handled. As so only a black screen is display, not even the Onkyo GUI can be displayed. By running the xrandr -display :0 --verbose i get:HDMI3 connected 1920x1080+0+0 (0x42) normal (normal left inverted right x axis y axis) 708mm x 398mmIdentifier: 0x41Timestamp: 111744 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 0 CRTCs: 0 1 Transform: 1.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 1.00 filter: EDID: 00003dcb820a 0014010380780a0dc9a057479827 12484c0001010101010101010101 010101010101011d8018711c1620582c 2500c48e219e011d80d0721c1620 102c2580c48e219e00fc0054 582d4e523830380a2020202000fd 0017f00f7e11000a202020202020016c 02033e7255850403020e0f0723241094 1312111d1e162526011f38097f070f7f 071707503f06c04d02005706005f7e01 675400834f66030c002100808c0a d08a20e02d10103e9600c48e2118 8c0ad090204031200c405500c48e2100 0018011d007251d01e206e285500c48e 211e0091Broadcast RG B: Fullsupported: Full Limited 16:2audio: auto supported: off auto on1920x1080@60 (0x42) 148.5MHz +HSync +VSync *current +preferredh: width 1920 start 2008 end 2052 total 2200 skew0 clock 67.5KHzv: height 1080 start 1084 end 1089 total 1125 clock 60.0Hz 720x576 (0x43) 27.0MHz -HSync -VSynch: width 720 start 732 end 796 total 864 skew0 clock 31.2KHzv: height 576 start 581 end 586 total 625 clock 50.0Hz 720x480 (0x44) 27.0MHz -HSync -VSynch: width 720 start 736 end 798 total 858 skew0 clock 31.5KHzv: height 480 start 489 end 495 total 525 clock 59.9Hz There i can see that the modeline is current selected to 1920x1080@60hz. If i select the mode as 720x576@50hz, them gnome desktop shows but its like the screen has 2 desktops splitting the screen in half. If i move the mouse to the top of the screen i can see it in the top and lower part of my TV. The funny part is my TV and Receiver now report a signal of 1920x1080@50hz. Once i change to this mode my xrandr -display :0 --verbose shows 2 new modes that weren't there before: Screen 0: minimum 320 x 200, current 720 x 576, maximum 8192 x 8192HDMI3 connected 720x576+0+0 (0x43) normal (normal left inverted right x axis y axis) 698mm x 392mm Identifier: 0x41Timestamp: 277649 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 0 CRTCs: 0 1 Transform: 1.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 1.00 filter: EDID: 00003dcb820a 0014010380780adaffa3584aa229 17494b0001010101010101010101 010101010101023a80d072382d40102c 4580ba88211e023a801871382d40 582c4500ba88211e00fc0054 582d4e523830380a2020202000fd 00173d0f440f000a202020202020013e 020362725c9f90140520130412031102 16071506011e0f1d0e1a0b190a262425 2338097f070f7f071707503f06c04d02 005706005f7e01675400834f7f03 0c002100b826e08011060800 1618002030480053580063680070e305 1f01011d80d0721c1620102c2580ba88219e00 ff Broadcast RGB: Fullsupported: Full Limited 16:2 audio: autosupported: off auto
Re: [Intel-gfx] Problem Intel i915 driver, i3 2010T, HDMI output modes problems
[apologies for munged threading, I subscribed after the original message was sent] paulo louro wrote: When starting ubuntu without the AV receiver or the TV being on, the xorg start with a resolution of 720x576. Have you tried forcing an initial mode in the Monitor section of your xorg.conf? Option PreferredMode whatever presumably whatever is something like 1920x1080x60.0 in your case ... ___ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
[Intel-gfx] Problem Intel i915 driver, i3 2010T, HDMI output modes problems
Dear intel-gfx developers. After spending a huge amount of time searching for a solution for me problem and haven't been able to find one, i decided to send a email to this mailing list hoping someone can help me or point me on the right direction. Hardware: Motherboard : ASRock H67M-GEProcessor: Intel Core i3 2010T AV Receiver: Onkyo TX-NR808TV: Panasonic 50VT20 Software: Ubuntu 11.10 with xorg-edgers ppa. Problem: When starting ubuntu without the AV receiver or the TV being on, the xorg start with a resolution of 720x576. When turning the TV on and selecting the AV-Receiver. The AV receiver reports that there is a signal but noting is display on the TV, by using my receiver Display/Information menu i can see im receiving a signal with 1920x1080i@120hz. The receiver pass's this direct to the television and ofc since its 120hz it cant be handled. As so only a black screen is display, not even the Onkyo GUI can be displayed. By running the xrandr -display :0 --verbose i get:HDMI3 connected 1920x1080+0+0 (0x42) normal (normal left inverted right x axis y axis) 708mm x 398mm Identifier: 0x41Timestamp: 111744 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 0 CRTCs: 0 1 Transform: 1.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 1.00 filter: EDID: 00003dcb820a 0014010380780a0dc9a057479827 12484c0001010101010101010101 010101010101011d8018711c1620582c 2500c48e219e011d80d0721c1620 102c2580c48e219e00fc0054 582d4e523830380a2020202000fd 0017f00f7e11000a202020202020016c 02033e7255850403020e0f0723241094 1312111d1e162526011f38097f070f7f 071707503f06c04d02005706005f7e01 675400834f66030c002100808c0a d08a20e02d10103e9600c48e2118 8c0ad090204031200c405500c48e2100 0018011d007251d01e206e285500c48e 211e0091Broadcast RGB: Full supported: Full Limited 16:2audio: autosupported: off auto on1920x1080@60 (0x42) 148.5MHz +HSync +VSync *current +preferredh: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.5KHzv: height 1080 start 1084 end 1089 total 1125 clock 60.0Hz 720x576 (0x43) 27.0MHz -HSync -VSynch: width 720 start 732 end 796 total 864 skew0 clock 31.2KHzv: height 576 start 581 end 586 total 625 clock 50.0Hz 720x480 (0x44) 27.0MHz -HSync -VSynch: width 720 start 736 end 798 total 858 skew 0 clock 31.5KHzv: height 480 start 489 end 495 total 525 clock 59.9Hz There i can see that the modeline is current selected to 1920x1080@60hz. If i select the mode as 720x576@50hz, them gnome desktop shows but its like the screen has 2 desktops splitting the screen in half. If i move the mouse to the top of the screen i can see it in the top and lower part of my TV. The funny part is my TV and Receiver now report a signal of 1920x1080@50hz. Once i change to this mode my xrandr -display :0 --verbose shows 2 new modes that weren't there before: Screen 0: minimum 320 x 200, current 720 x 576, maximum 8192 x 8192HDMI3 connected 720x576+0+0 (0x43) normal (normal left inverted right x axis y axis) 698mm x 392mm Identifier: 0x41Timestamp: 277649 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 0 CRTCs: 0 1 Transform: 1.00 0.00 0.00 0.00 1.00 0.00 0.00 0.00 1.00 filter: EDID: 00003dcb820a 0014010380780adaffa3584aa229 17494b0001010101010101010101 010101010101023a80d072382d40102c 4580ba88211e023a801871382d40 582c4500ba88211e00fc0054 582d4e523830380a2020202000fd 00173d0f440f000a202020202020013e 020362725c9f90140520130412031102 16071506011e0f1d0e1a0b190a262425 2338097f070f7f071707503f06c04d02 005706005f7e01675400834f7f03 0c002100b826e08011060800 1618002030480053580063680070e305 1f01011d80d0721c1620102c2580ba88 219e00ffBroadcast RGB: Full supported: Full Limited 16:2audio: autosupported: off auto on1920x1080@60 (0x42) 148.5MHz +HSync +VSync +preferredh: width 1920 start 2008 end 2052 total 2200 skew0
