Add bindings doc for Qcom's smmu-v2 implementation.
Signed-off-by: Vivek Gautam <vivek.gau...@codeaurora.org>
Reviewed-by: Tomasz Figa <tf...@chromium.org>
Tested-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
Reviewed-by: Rob Herring <r...@kernel.org>
Reviewed-by: Robin Murphy <robin.mur...@arm.com>
---
Changes since v18:
None.
.../devicetree/bindings/iommu/arm,smmu.txt | 39 ++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
index 8a6ffce12af5..a6504b37cc21 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
@@ -17,10 +17,16 @@ conditions.
"arm,mmu-401"
"arm,mmu-500"
"cavium,smmu-v2"
+ "qcom,smmu-v2"
depending on the particular implementation and/or the
version of the architecture implemented.
+ Qcom SoCs must contain, as below, SoC-specific compatibles
+ along with "qcom,smmu-v2":
+ "qcom,msm8996-smmu-v2", "qcom,smmu-v2",
+ "qcom,sdm845-smmu-v2", "qcom,smmu-v2".
+
- reg : Base address and size of the SMMU.
- #global-interrupts : The number of global interrupts exposed by the
@@ -71,6 +77,22 @@ conditions.
or using stream matching with #iommu-cells = <2>, and
may be ignored if present in such cases.
+- clock-names: List of the names of clocks input to the device. The
+ required list depends on particular implementation and
+ is as follows:
+ - for "qcom,smmu-v2":
+ - "bus": clock required for downstream bus access and
+ for the smmu ptw,
+ - "iface": clock required to access smmu's registers
+ through the TCU's programming interface.
+ - unspecified for other implementations.
+
+- clocks: Specifiers for all clocks listed in the clock-names property,
+ as per generic clock bindings.
+
+- power-domains: Specifiers for power domains required to be powered on for
+ the SMMU to operate, as per generic power domain bindings.
+
** Deprecated properties:
- mmu-masters (deprecated in favour of the generic "iommus" binding) :
@@ -137,3 +159,20 @@ conditions.
iommu-map = <0 &smmu3 0 0x400>;
...
};
+
+ /* Qcom's arm,smmu-v2 implementation */
+ smmu4: iommu@d00000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0xd00000 0x10000>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ power-domains = <&mmcc MDSS_GDSC>;
+
+ clocks = <&mmcc SMMU_MDP_AXI_CLK>,
+ <&mmcc SMMU_MDP_AHB_CLK>;
+ clock-names = "bus", "iface";
+ };
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
