Re: [ipxe-devel] Help with iPXE, wimboot and PXELinux

On Sat, Jul 2, 2022 at 3:39 AM Alex Leo wrote: > > Hey everyone, > > Tried asking on forums but registration is closed, hopefully you're guys ok > with asking the question here. > I'm attempting to boot Windows PE environment using wimboot and iPXE > I'm currently loading iPXE through PXELinux

Re: [ipxe-devel] UEFI iPXE / Embedded iPXE

On Wed, Mar 25, 2020 at 1:01 PM Huang, Alwen wrote: > Hi iPXE Developers, > > Is it possible for you to provide some input on this topic? > > We tried 2 scenarios under UEFI shell as follows: > > 1. > > iPXE > autoboot > > It was like we tried to boot with the Embedded iPXE option. > > It failed

Re: [ipxe-devel] Error "Could not select: Exec format error (2e008081)" while loading EFI images via HTTP/TFTP

Hi Felix, On Mon, Sep 9, 2019 at 1:35 PM Felix Jacobi wrote: > Dear iPXE developers, > > I am currently testing iPXE with a notebook which seems to be unable to > chainload EFI images via HTTP and TFTP. I tried loading a Linux kernel > with an EFI stub included and the EFI binary of SYSLINUX.

Re: [ipxe-devel] Secure Boot

Hi Kevin, On Sat, Sep 7, 2019 at 5:57 AM RepairCom wrote: > Hi, > > Can you tell me how I can use iPXE with Secure Boot enabled? > You would need to follow the steps here http://ipxe.org/appnote/etoken Cheers Arne > ___ ipxe-devel mailing list

Re: [ipxe-devel] sanboot error questions

On Tue, Feb 12, 2019 at 2:33 PM Christian Rappo wrote: > > Hi, > > You can forget the PS: below.I build from a Ubuntu VM (as recommended) and > it's OK now, sorry. > But the "sanboot --filename \bootmgr --no-describe --drive 0x80 > (KO--->>Boot from SAN device 0x80 failed: Operation

Re: [ipxe-devel] Non-embedded IP Configuration

On Fri, Feb 1, 2019 at 11:23 PM Matthew Walster wrote: > > I have a scenario where iPXE would be perfect for loading / upgrading the > operating system on remotely deployed hardware, but I've come across a hurdle > regarding the lack of DHCP at the remote site, and I was wondering if anyone >

Re: [ipxe-devel] How to UEFI HTTP chainload using MS DHCP

On Thu, Dec 27, 2018 at 3:27 PM Tuzhenhua wrote: > > Hi iPXE, > I’m trying UEFI HTTP chainload with a MS DHCP server and IIS. > I checked online document http://ipxe.org/appnote/uefihttp. It’s for ISC. > Since I had a existing MS DHCP which successfully boot with TFTP > chainload

Re: [ipxe-devel] Fallback to IPv4 or disable IPv6

On Thu, Nov 1, 2018 at 9:35 PM Anatoli Babenia wrote: > > Hello, > > My upstream provider doesn't support IPv6. No addresses are reachable. > But my router still gives me an IPv6 address and is even able to resolve > records. Being able to resolve IPv6 address iPXE thinks that it got > IPv6

Re: [ipxe-devel] Problem with first steps in IPXE using wimboot

On Wed, Sep 26, 2018 at 6:44 PM Vancek, Sascha (MSC) wrote: > > Hello, > > is it possible to get help on that issue ? > > I set up a system with Win Server 2016 and running DHCP, IIS and WDS on it. > > I build the undionly.kpxe by with an embedded script to chainload to this > server and run a

Re: [ipxe-devel] iPXE

On Tue, Aug 1, 2017 at 9:49 PM, Adam Pickens wrote: > Good afternoon, > > I have a question about iPXE. Do I need to create an iPXE server for https > to work with iPXE or would a normal OXE server work? > > I have not found documentation about setting up an iPXE server

Re: [ipxe-devel] wimboot installs not working if doing PXE boot through IPMI commands

On Wed, Aug 2, 2017 at 2:28 AM, Floris Bos <b...@je-eigen-domein.nl> wrote: > On 08/01/2017 07:43 PM, shouldbe q931 wrote: >> >> On Mon, Jul 31, 2017 at 6:00 PM, Floris Bos <b...@je-eigen-domein.nl> >> wrote: >>> >>> Hi, >>> >>>

Re: [ipxe-devel] wimboot installs not working if doing PXE boot through IPMI commands

On Mon, Jul 31, 2017 at 6:00 PM, Floris Bos wrote: > Hi, > > > We normally tell servers to initiate a PXE network boot through IPMI > commands, among the lines of: > > > ipmitool -I lanplus -H 1.2.3.4 -U ipmiuser -P password bootdev pxe > ipmitool -I lanplus -H 1.2.3.4 -U

Re: [ipxe-devel] ipxe newbie booting question

On Thu, Jul 27, 2017 at 7:06 PM, Lonnie Cumberland wrote: > Thanks for answering my post. > > The reason that I need to boot iPXE from an iso is because I am booting from > public hosted VPS machines that are located on the Internet. > > I can boot each machine and now get to

Re: [ipxe-devel] ipxe newbie booting question

On Thu, Jul 27, 2017 at 1:31 PM, Lonnie Cumberland wrote: > Greetings, > > I hope that you can help as I have a very quick and newbie iPXE question. > > I am developing a system that allows for booting some CoreOS nodes for a > clustering project that I have going now but

Re: [ipxe-devel] PXE and BMC

On Sat, Jun 10, 2017 at 3:23 AM, George Perlington wrote: > you are misunderstanding . I never say bad or good people .Ofcourse they > are perfect people to run open source project :-) I was looking for some > solution run PXE on my Arm processor .This is will help me on

Re: [ipxe-devel] PXE and BMC

On Fri, Jun 9, 2017 at 9:53 PM, Geert Stappers wrote: > On Fri, Jun 09, 2017 at 07:00:55PM +0800, George Perlington wrote: >> Hello >> >> Anyone know very active community for PXE and BMC. > > And what is "BMC" ? > I presumed Baseband Management Controller (IPMI etc), but

Re: [ipxe-devel] Hyper-V G2 iPXE menu scrolling

On Mon, Mar 14, 2016 at 6:02 PM, Michael Brown <mc...@ipxe.org> wrote: > On 14/03/16 14:44, shouldbe q931 wrote: >> >> BIOS booting errored with "console: command not found" so I added || >> to the end of the line, and it works for both G1 & G2 Hyper-V, a

Re: [ipxe-devel] Hyper-V G2 iPXE menu scrolling

On Sun, Mar 13, 2016 at 11:18 PM, Michael Brown <mc...@ipxe.org> wrote: > On 13/03/16 22:22, shouldbe q931 wrote: > Try enabling CONSOLE_CMD (in config/general.h) and CONSOLE_FRAMEBUFFER (in > config/console.h) and use a command such as "console -x 800 -y 600" to

[ipxe-devel] Hyper-V G2 iPXE menu scrolling

Hi, When I boot with a G1 VM (or a BIOS PC), the menu works perfectly, I don't have a UEFI physical device to test with at the moment, I have a UEFI PC, but it doesn't have a UEFI gfx card in it, so boots BIOS mode. After spending several hours trying to describe what I'm seeing,. I gave up and

Re: [ipxe-devel] Error

On Sun, Mar 13, 2016 at 6:30 PM, Andreas Hammarskjöld < jun...@2pintsoftware.com> wrote: > Console command does not work on HyperV Gen1 machines, something with the > weird VESA bus. Also the Hyper-V Gen1 driver is not great so very slow. So > switch to a Gen2 machine if you can. > > > >

Re: [ipxe-devel] Windows bootup problems after successfull wimboot-iscsi setup

On Mon, Nov 17, 2014 at 3:03 PM, Andrew Bobulsky rule...@gmail.com wrote: Ivan, The 7E stop code is usually something esoteric. If the drivers weren't loading up at all, you'd get a 7B error, or Inaccessible Boot Device. As I recall, anyway ;) I saw that you scripts set your gateway to

Re: [ipxe-devel] Weird issue booting to x64 WinPE 3.0 or 4.0 after mounting iSCSI disc

On Mon, Jul 1, 2013 at 7:53 PM, Steve Cross hairlessh...@stevecross.org wrote: This was a fresh iSCSI disc that was setup specifically for this client. I have tried removing it and re-adding it multiple times. I have tried booting with a blank iSCSI disk, I have tried mounting it to a running

Re: [ipxe-devel] Booting a Mac into WDS with ipxe.usb (was: Re: gPXE or iPXE on USB)

On Wed, Jun 19, 2013 at 9:19 PM, Robin Smidsrød ro...@smidsrod.no wrote: On 19.06.2013 21:03, Yadin Flammer wrote: Anyway, now that I can actually get the .usb cloned to USB, I face a different set of issues. Some Mac systems simply will not see the drive as bootable, others will. I

Re: [ipxe-devel] iSCSI boot from SAN issue w/ iPXE Equallogic and vlan

On Mon, Jun 17, 2013 at 11:17 AM, Thomas Pöhler t...@turtle-entertainment.de wrote: Hey Guys, we are using a Dell Equallogic iSCSI SAN Appliance to serve our volumes. We want to get rid of expensive Qlogic iscsi HBAs to boot from SAN. Therefore we are using our standard NIC with PXE booting

Re: [ipxe-devel] [gPXE] gpxe on USB or HD

On Thu, Jun 13, 2013 at 9:22 PM, Yadin Flammer y...@psu.edu wrote: Any advice on getting a USB drive to work with ipxe, as well as getting the forums to work so I can reach a wider audience, are appreciated. Cheers, Yadin The forum at http://forum.ipxe.org seems to work fine for me

Re: [ipxe-devel] Windows 8 ISCSI Boot

On Thu, May 30, 2013 at 3:02 PM, Marc Hammer marcham...@arcor.de wrote: Hello, I try to boot Windows 8 (x86) over ISCSI on a system with a Realtek RTL 8111C onboard nic. The first setup step with loading the boot.wim with wimboot works fine. The Realtek nic is installed in the PE and the

Re: [ipxe-devel] iPXE server

On Wed, May 22, 2013 at 9:24 PM, m.m_de_vr...@online.nl wrote: Hello Andrew, You didn't send this to Andrew Please always reply to the mailing list It's now working! But two things: You wrote that you can have two boot.ipxe scrips, one for home and one for pro: win7home.ipxe #!ipxe

Re: [ipxe-devel] iPXE server

On Mon, May 20, 2013 at 12:30 PM, m.m_de_vr...@online.nl wrote: Hello, I have set up a pxe-server from which I can install Ubuntu and Windows7. But when I boot PE-environment for installing WIndows it stops with a dis shell. Then I have to make e new script to start the actual