Re: Unable to determine where the build failed

Thanks Andrey. Actually the problem is only with the individual log files from the module build. At the end of the whole build, the log will show all the errors from all modules. Our build is configured to run to the end even one module fails, which I think should be changed. But outside of

Re: Windows Jenkins Service, how to determine if 2nd job should be started?

Since the first job is committing changes to a subversion repository, I think you could have the second job poll that subversion repository (no plugins required).  When the first job submits the change to subversion, the second job will see that as a change and will run. Because the second job

how to provide build.number to grails war when building with 'build with grails' option

Hello Grails plugin users, Does any one know if we can read env variables or run a unix/linux command in the grails parameters when we are in 'build with grails' option ? Below is my scenario : In Jenkins job config, I do 'build with grails'->grails 1.3.7->target : war in Properties field, I

Re: Unable to determine where the build failed

Chris, What do you see in the console output for the job? Andrey On Thu, Jun 28, 2012 at 2:16 PM, cchen wrote: > Hey folks, > > Using jenkins to build a scala project via maven, and I am having trouble > to determine how builds are failing at times. Sometimes, there is no > compile error, no

Unable to determine where the build failed

Hey folks, Using jenkins to build a scala project via maven, and I am having trouble to determine how builds are failing at times. Sometimes, there is no compile error, no test failure and everything seemed to succeed, but jenkins says it failed. So I am hoping to understand how Jenkins deter

Re: Promote Plugin Configuration

The Promote plugin is its own project and has its own configuration file. which are stored under Jobs//promotion//config.xml If you are copying jobs via the new job / copy from existing project, please look and see if there is an issue relating to this, as I tested it in 1.449 and it works co

RE: SSH not executing commands in the correct order

That's interesting. I do have EnvInject installed but it is not used on these projects. Perhaps it has gotten a little over aggressive? -Jim -Original Message- From: jenkinsci-users@googlegroups.com [mailto:jenkinsci-users@googlegroups.com] On Behalf Of Daniel Beck Sent: Thursday, Jun

RE: SSH not executing commands in the correct order

Now you're on to something. :) First, for those who don't know, you can pull up the slave information like Sami suggests by doing this: http://server:8080/computer/slaveName/systemInfo The systems that are failing are systems that add something to the PATH via a Node Property. So for example,

Re: SSH not executing commands in the correct order

Are you using EnvInject? There's an option to clear all environment variables a node inherits. https://wiki.jenkins-ci.org/display/JENKINS/EnvInject+Plugin > Some use cases > • To remove inherited environment variables (PATH, ANT_HOME, ...) at > node level (master/slave), available by def

Re: Windows Jenkins Service, how to determine if 2nd job should be started?

The first job does a msbuild of the binaries and then commits the changes to SVN (if there were any changes), then there is a Post build step (Build other projects), that executes the second job that builds the installer. It does this post build step even if there were no changes and no binarie

Re: jenkins java.outofmemory:permGen space error

You should open a terminal application and enter this command: man sudo You have problems because your sudo is configured to require a password for the user who is executing sudo. -- Sami Varghese Renny kirjoitti 26.6.2012 kello 16.20: > > Yeah, i changed like /usr/share/tomcat6/.jenkins/Eule

Re: SSH not executing commands in the correct order

I do not know how that has happened. I'm just saying that's what the symptoms look like. Maybe it is not your fault at all? Maybe the script that starts Jenkins was written by someone else? Or maybe I'm wrong? You could easily check by open a web browser to your Jenkins and clicking on the link

Re: How to hold web application not to run on same server as jenkins is using

Your question has little to,do with Jenkins, but maybe you can use commands like scp and ssh to copy files to another server and execute commands on another server. -- Sami Varghese Renny kirjoitti 28.6.2012 kello 8.08: > > > After build job application is automatically up on same server.

RE: SSH not executing commands in the correct order

I wonder how I would accomplish that by just upgrading Jenkins? So are you saying that the order that I see those in the error report has no meaning as well? I have noticed a number of SSH related issues in the last several Jenkins releases. I wonder if I just have a regression here. -Jim -

Re: Is it possible to block a build job if another one is running which is not part of up- or downstream?

I'll add another way to exclude other jobs: make a slave with only one executor and tie the jobs to restrict to the slave. Only one at a time will run. -- Sami Jan Seidel kirjoitti 28.6.2012 kello 13.41: > Hi folks, > > I am trying to parallelize some of our builds to speed things up. > This

Re: Windows Jenkins Service, how to determine if 2nd job should be started?

If the first build commits binaries to svn, I think you could configure the 2nd job to poll the svn repo. This way it won't run unless there are changes in svn. By the way, why is it you do not want to always trigger the 2nd job after the first job has built the binaries? Is very expensive? --

Re: SSH not executing commands in the correct order

It looks like you have somehow managed to remove the PATH environment variable. -- Sami Jim McCaskey kirjoitti 28.6.2012 kello 18.33: > Hello all, > > I upgraded to Jenkins 1.472 from 1.461 (I think it was 1.461) and have > noticed a problem with my SSH agents. I have a freestyle project set

Re: Weird exceptions at the end of every build

this won't help you any, but it's not happening to us. We have Jenkins 1.432. Maybe it's a plugin that's causing that exception? good luck! -- View this message in context: http://jenkins.361315.n4.nabble.com/Weird-exceptions-at-the-end-of-every-build-tp4632684p4633134.html Sent from the Jenkins

Re: Jenkis with high availability

We have a single Jenkins Master running on linux 64-bit machine with 6 Gigs of ram allocated for the Jenkins VM. We have 700+ jobs and 50+ slaves (all OS's (windows/mac/linux/freebsd/etc/), and all connected via ssh), and we always have a build running. Only on rare occasions is Jenkins not doing

Re: I need to drop text from Jenkins into a text file before build

I agree with Mark that the methodology sounds a little hinky. Nonetheless, it sounds like what you're looking for is a Build Parameter. Don't remember at this point whether that's built-in or offered as part of a plugin. But that's what it's called. With Build Parameters enabled, you're present

Re: Does Jenkins have something like CruiseControl's "ignoreFiles" attribute?

We'll look into it. The description sounds like exactly what we need. Thanks, -Chip Whitmer On Wednesday, June 27, 2012 3:58:20 PM UTC-6, Larry Shatzer, Jr. wrote: > > I'm not sure about the TFS plugin, but you could look at > https://wiki.jenkins-ci.org/display/JENKINS/Pathignore+Plugin > >

RE: Can i run master and slave on same machine

You don’t need to set up a Jenkins server instance on the slave machine. You will need to set up a slave instance, and that will connect to the Jenkins server. There are several ways to launch slaves, documented at https://wiki.jenkins-ci.org/display/JENKINS/Distributed+builds. Slaves don’t h

Promote Plugin Configuration

Hello! I noticed that when I copy jobs, the configuration for the Promote Plugin doesn't get copied with it. Nothing revealed itself with regard to the Promote Plugin in the config.xml file for the job either. Where can I find the promote config associated with a job I'm looking to copy? Che

SSH not executing commands in the correct order

Hello all, I upgraded to Jenkins 1.472 from 1.461 (I think it was 1.461) and have noticed a problem with my SSH agents. I have a freestyle project set up that issues this command after the source gets checked out: sh build.sh 10.2.5.SNAPSHOT 2>&1 | tee build.log However, I am getting an error

Re: trigger build from rest - Null value not allowed as an environment variable

Ok maybe I found a workaround for this The Post method with Json does not work with the SVN Tag parameters (I could not find a solution not any issue opened on this) The solution seems to be using a different url to submit the build : http://ci.mydomain/job/pmyjob/*buildWithParameters *and subm

Re: Jenkis with high availability

On 28 June 2012 13:29, Marcus Vinicius wrote: > Hi community, > > We are discussing the architecture for Jenkins in our company. Our forecast > is to have something around 500 jobs, each with average running time of 3 > minutes. Not to large an instance, but not small either > > We need a high a

Follow the console (plug-in?)

Hi, I've got an idea and would like to ask you if you've heard of any plug-in which could provide such functionality... Do you feel it might be useful and if it might be hard to get implemented. What I need is to look at a few build jobs which triggers another sub-jobs and some of those are matrix

Re: Windows Jenkins Service, how to determine if 2nd job should be started?

Can anyone else please help me with this. I do not know which plugin to us (and is there an example of doing this in windows?). Can I use the Jenkins command line in a windows batch file (Do I have to install Java first, then what)? Thanks. On Tuesday, June 26, 2012 10:07:18 AM UTC-4, louwho

Jenkis with high availability

Hi community, We are discussing the architecture for Jenkins in our company. Our forecast is to have something around 500 jobs, each with average running time of 3 minutes. We need a high availability environment, and we can not prevent the execution of new releases by the unavailability of the b

Re: Is it possible to block a build job if another one is running which is not part of up- or downstream?

Quoting Jan Seidel : Hi folks, I am trying to parallelize some of our builds to speed things up. This particular build is quite special as it also interacts with databases. Multiple write access on a database will wreck the content, so this must be avoided by all means. It takes us in worst cas

RE: Is it possible to block a build job if another one is running which is not part of up- or downstream?

There are several plugins which might be worth looking at. The “locks and latches” plugin has already been mentioned, but this is listed for possible deprecation (see https://wiki.jenkins-ci.org/display/JENKINS/Proposed+Plugin+Deprecation). You might want to look at the Exclusion plugin, which w

AW: Is it possible to block a build job if another one is running which is not part of up- or downstream?

Hi Jan, have a little look at the "locks-and-latches" plugin. This should provide the lock you need. e.g. set up the lock "database" in jenkins configuration use the lock in all database related jobs. Regards Wolfgang

Is it possible to block a build job if another one is running which is not part of up- or downstream?

Hi folks, I am trying to parallelize some of our builds to speed things up. This particular build is quite special as it also interacts with databases. Multiple write access on a database will wreck the content, so this must be avoided by all means. It takes us in worst cast out of business for

Problem with Artifactory Plugin Release Management

Trying to "Build and Release to Artifactory", using all default settings. It fails with a strange Git error. *> [RELEASE] Committing release version on branch 'REL-BRANCH-inuc-0.0.2'* *> [RELEASE] Creating tag 'inuc-0.0.2'* *> [RELEASE] Pushing branch 'REL-BRANCH-inuc-0.0.2' to '/git/inuc/core/

Re: I need to drop text from Jenkins into a text file before build

The release notes for something you're building seem like they should come from a file in the source control system rather than being submitted to the Jenkins job through a web page.  That will allow the release notes to be tied to the same tags and branches as the source code they are documenti

I need to drop text from Jenkins into a text file before build

Hi folks, I need an option that allows me to drop special notes into a plain text file. This must happen before some Jenkins jobs start to run as that text will be pasted into release notes. It must handle hardcoded locations/filenames. In best case does each job have its own textarea/editor wh

Re: trigger build from rest - Null value not allowed as an environment variable

a small add-on, the problem seems to be related to the fact that the field is of type "List Subversion type" instead of a simple string. POST is working fine if i switch type to string , maybe I have to specify other values other then simple name/value ?

Apache HTTPS and AJP: java.io.EOFException

Hi, I configured Apache with AJP as follows ProxyPassajp://hostname:8082/ timeout=1200 ProxyPassReverse ajp://hostname:8082/ and everything works fine. I then tried to do everything over HTTPS but I get following error Jun 28, 2012 10:38:21 AM winstone.Logge

trigger build from rest - Null value not allowed as an environment variable

Hi All I'm trying to trigger a build from a java client through Rest API the build is parametrized: - tag : SVN tag - goal : maven goal I submit a POST to the build URL with such parameters INFO: url:[http://ci.mydomain/job/myjob/build] INFO: POST data:[json={"parameter":[{"name":"tag"