- **status**: open --> closed-works-for-me
---
**[bugs:#523] Read timed out when loading Geoportale Nazionale WMS**
**Status:** closed-works-for-me
**Milestone:** undecided
**Labels:** WMS
**Created:** Sat Oct 28, 2023 05:35 PM UTC by Roberto Rossi
**Last Updated:** Tue Oct 31, 2023 05:14 PM
> Do you know hot to combine more than one WMS additional parameter: I
> tried with ;,&? without success
the ampersand (&) should work to concatenate url parameters like e.g.
`WIDTH=956=410`
---
**[bugs:#523] Read timed out when loading Geoportale Nazionale WMS**
**Status:** open
good point Jukka,
tried myself. default timeout in OJ is 5 seconds. this times out. you can raise
the value per (e.g. in english menu)
Customize -> Options -> Network properties -> Timeout -> Read timeout (ms)
.
raising it to 60s = 60.000 loads the layer after about 10s or so.
does that sove
---
**[bugs:#524] test**
**Status:** open
**Milestone:** undecided
**Created:** Sun Oct 29, 2023 12:10 PM UTC by ede
**Last Updated:** Sun Oct 29, 2023 12:10 PM UTC
**Owner:** nobody
ff
---
Sent from sourceforge.net because jump-pilot-devel@lists.sourceforge.net is
subscribed to
hey Roberto,
which OJ version are you using? assuming it is OJ 2.x please open an issue on
https://github.com/openjump-gis/openjump/issues and i will have a look.
we switched platform with the =J 2.x release. OJ1.x is not acoitvely maintained
anymore.
..ede
---
**[bugs:#523] Read timed out
- **status**: open --> closed-accepted
- **Comment**:
issue moved to github
https://github.com/openjump-gis/openjump/issues/56
---
** [bugs:#522] CADTools - Drawing Blocks throws NPEs**
**Status:** closed-accepted
**Milestone:** undecided
**Created:** Tue Aug 16, 2022 09:57 AM UTC by
hey Peppe,
now we are here, let's finish this Ticket here, no need for a copy on github.
just new one should go to github as we moved the development there :)
wrt. to CadTools, please try
hey Peppe,
please try the next snapshot build. Cadtools should be fixed now. isf so, pls
close this issus.
thanks!.. ede
---
** [bugs:#522] CADTools - Drawing Blocks throws NPEs**
**Status:** open
**Milestone:** undecided
**Created:** Tue Aug 16, 2022 09:57 AM UTC by Giuseppe Aruta
**Last
- **summary**: Severe bug on CADTools - Block section - Some blocks are not
read --> CADTools - Drawing Blocks throws NPEs
---
** [bugs:#522] CADTools - Drawing Blocks throws NPEs**
**Status:** open
**Milestone:** undecided
**Created:** Tue Aug 16, 2022 09:57 AM UTC by Giuseppe Aruta
**Last
hey Peppe,
please start reporting on github. let's clean out here :)
also when reporting NPEs always provide the error stack as well. will have a
looksie.. ede
---
** [bugs:#522] Severe bug on CADTools - Block section - Some blocks are not
read**
**Status:** open
**Milestone:** undecided
- **Milestone**: OJ_1.16 --> OJ_2.x
---
** [bugs:#516] RemodelerTool not correct**
**Status:** pending
**Milestone:** OJ_2.x
**Created:** Wed Nov 25, 2020 11:29 AM UTC by michael michaud
**Last Updated:** Sun Feb 20, 2022 09:12 AM UTC
**Owner:** michael michaud
There are several bugs in
- **status**: open --> closed-fixed
- **Comment**:
even though it is still downloadable, the process to use does not seem to be
straightforward as well https://gis.stackexchange.com/a/275133/41386 apart from
being outdated.
i'll deactivate it.
---
** [bugs:#482] OpenJUMP Style -
- **status**: open --> closed-fixed
- **Milestone**: undecided --> OJ_2.x
---
** [bugs:#521] Error on Measure Toolbox plugin OpenJUMP 2 - rev 4996 20211017**
**Status:** closed-fixed
**Milestone:** OJ_2.x
**Created:** Thu Nov 18, 2021 07:30 PM UTC by Giuseppe Aruta
**Last Updated:** Mon Nov
On 23.11.2021 00:51, ede wrote:
> fix is pushed now. i removed your release for cleanliness. the resulting
> snapshot needs to be tested still. will have a look tomorrow then.
tested and looks good.. ede
---
** [bugs:#521] Error on Measure Toolbox plugin OpenJUMP 2 - rev 4996 20211017**
hey Mike,
ok, now did exactly what we figured
first ran OJ2 from IDE including the measure-extension project classes. worked
fine.
then i ran `mvn package` and used the resulting extension jar. worked fine too.
just to make sure - downloaded `OpenJUMP-20211017-r4998(f9296be)-PLUS` again.
> Are you sure you tested the extension from the plugins menu and using the
> drag mode as stated by Peppe and not the measure tool of the toolbar which
> works fine for me also ?
that's why i asked for a step-by-step before to reproduce it ;) . indeed using
the 'measure rectangle' from
On 21.11.2021 17:02, michael michaud wrote:
> Sorry, https://ojrepo.soldin.de "2.0-SNAPSHOT" is referencing jts1.18.1 but
> "2.0-main-SNAPSHOT" is referencing jts 1.18.2 and measure-toolbox is pointing
> to the second. So I have no idea about what happens.
yeah and extension are compiled
tried `OpenJUMP-20211017-r4998(f9296be)-PLUS` note **r4998**, r4996 does not
exist
with
```
Using 'java' found in 'C:\Program Files (x86)\Java\jre1.8.0_261\bin\'
java version "1.8.0_261"; Java(TM) SE Runtime Environment (build
1.8.0_261-b12); Java HotSpot(TM) Client VM (build 25.261-b12 mixed
hey Mike,
looks like a user error. the correct checksum is indeed
~~~
$ sha1sum.exe /cygdrive/d/measure-toolbox-extension-2.1.1-alpha.zip
9e98d3419ae3a857c9ffcf85d0a073d22322782b
*/cygdrive/d/measure-toolbox-extension-2.1.1-alpha.zip
$ cat
> My hypothesis is a mix of jts 1.18.1 and jts 1.18.2 usage between core and
> extension (this upgrade is quite recent and I can see that 1.18.1 is
> referenced on
> https://ojrepo.soldin.de/org/openjump/OpenJUMP/2.0-SNAPSHOT/OpenJUMP-2.0-20210515.224708-6.pom
>Ede, any hint ? Can we try to
Mike,
threading was mainly meant to wrap the check itself, so it can be abandoned
after a timeout. Swing would probably still run those one afte the other i
guess.
provided the EnableChecks are generally fast and read only and modern CPUs are
multicore, i wouldn't expect disadvantages though.
we should maybe implement a threaded limited enablechecking, that will fail an
Enablecheck that takes too long and shows the menu regardless?
..ede
---
** [bugs:#312] Menu slow down**
**Status:** open
**Milestone:** OJ_future
**Labels:** General / Other
**Created:** Mon Apr 22, 2013 09:34
- **Comment**:
not blocking OJ2 move it to future
---
** [bugs:#316] Inconsistencies in plugin enablecheck**
**Status:** open
**Milestone:** OJ_future
**Labels:** General / Other
**Created:** Tue May 14, 2013 06:43 AM UTC by michael michaud
**Last Updated:** Sun Aug 08, 2021 04:34 PM UTC
- **Operating System**: Windows --> not specified
- **Milestone**: OJ_2.x --> OJ_future
- **Comment**:
not blocking OJ2 move it to future
---
** [bugs:#316] Inconsistencies in plugin enablecheck**
**Status:** open
**Milestone:** OJ_future
**Labels:** General / Other
**Created:** Tue May 14,
- **status**: open --> closed-fixed
- **Comment**:
close it as GDAL-OpenJPEG seems good enough for now.
---
** [bugs:#430] JP2 reader does not read all jp2 files**
**Status:** closed-fixed
**Milestone:** OJ_2.x
**Created:** Sat Oct 01, 2016 09:56 AM UTC by michael michaud
**Last Updated:**
- **Milestone**: OJ_2.x --> OJ_future
- **Comment**:
the file dialogs areoperating system specific. just checked and even on recent
OSX 1.15 Catalina the 'add folder' button is missing. will need to find out how
to implement a proper full functioning file dialog on OSX.
still, not blocking OJ
- Description has changed:
Diff:
--- old
+++ new
@@ -1,8 +1,6 @@
this is not actually a bug ticket, but a notepad for backward compatible
breaking things to do in OJ2.x
-FeatureInstaller
-privatize Constructor
-replace new FeatureInstaller() with FeatureInstaller.getInstance()
---
** [bugs:#520] make the Toolbar part of default-plugins.xml, to easily
add/remove/reorder it's components**
**Status:** open
**Milestone:** OJ_future
**Created:** Sun Aug 08, 2021 04:18 PM UTC by ede
**Last Updated:** Sun Aug 08, 2021 04:18 PM UTC
**Owner:** ede
currently toolbar
- **status**: open --> closed-fixed
- **Comment**:
implemented on https://github.com/openjump-gis/openjump
---
** [bugs:#501] I18N from extension**
**Status:** closed-fixed
**Milestone:** OJ_2.x
**Created:** Mon Aug 31, 2020 10:32 AM UTC by michael michaud
**Last Updated:** Sun Sep 13, 2020
On 11/25/2020 13:15, michael michaud wrote:
> Even after several bug fixes, I still not have a good understanding of the
> image framework.
> To be able to imagine improvements, I would need a more precise idea about
> when the image is read from disk and when/where/what is cached.
for
maybe it'd make sense to simplify the framework to make it more memory
efficient?
as i see it, currently two things happen
1. for visualization a virtual image is created representing the (elevation or
such) values in the raster
2. the image is still accessed to retrieve the actual values to do
- **Milestone**: undecided --> OJ_1.16
---
** [bugs:#511] CropWarp raster plugin can't overload existing file**
**Status:** open
**Milestone:** OJ_1.16
**Created:** Tue Nov 10, 2020 10:01 PM UTC by michael michaud
**Last Updated:** Sat Nov 21, 2020 11:34 AM UTC
**Owner:** nobody
If one
- **Milestone**: undecided --> OJ_1.16
---
** [bugs:#513] displaying raster layers in a correct way**
**Status:** open
**Milestone:** OJ_1.16
**Labels:** raster display
**Created:** Wed Nov 11, 2020 12:35 PM UTC by Giuseppe Aruta
**Last Updated:** Sat Nov 21, 2020 08:09 AM UTC
**Owner:**
- **Milestone**: OJ_1.16 --> OJ_future
- **Comment**:
if JVM retrieves a shutdown signal there is little we can do. tried to add
shutdown hooks and such, but JVM ends uncancellable. no way to show a save me
dialog .
if we could find a way to catch the Ctrl+C ("kill") signal before it reaches
- **status**: pending --> closed-fixed
- **Comment**:
tested. working well.
---
** [bugs:#505] Customize -> Beanshell Editor Plugin opens unlimited dialog
windows every time it is executed**
**Status:** closed-fixed
**Milestone:** OJ_future
**Created:** Mon Sep 14, 2020 02:36 PM UTC by ede
maybe it's related to memory usage? ..ede
---
** [bugs:#511] CropWarp raster plugin can't overload existing file**
**Status:** open
**Milestone:** undecided
**Created:** Tue Nov 10, 2020 10:01 PM UTC by michael michaud
**Last Updated:** Wed Nov 11, 2020 09:02 AM UTC
**Owner:** nobody
If one
the use of JAI operations saves memory afaik. . it ideally creates a chain
from loading over computing to rendering.
the scaling you mention above seems to use BufferedImage in memory, which of
course is faster but needs the whole source image in memory. for cases like
Sextante, where images
- Description has changed:
Diff:
--- old
+++ new
@@ -3,5 +3,6 @@
FeatureInstaller
privatize Constructor
replace new FeatureInstaller() with FeatureInstaller.getInstance() projectwide
+(future) make the toolbar part of default-plugins.xml, to easily
add/remove/reorder it's components
sure. at least for CORE plugins that is. it saves adding addMainMenuPlugin()
and friends to the initialize() method and makes clear that default-plugins.xml
is authorative, meaning it can even completely disable a plugin installation.
not saying to change our old plugins, but use it when adding
On 10/12/2020 19:27, michael michaud wrote:
> There are two problems in GeoImage.paint when using very high level of zoom :
> - the image to display is computed with jai transformations like scaling,
> subsampling or cropping which use float parameters : at very high levels of
> zoom, the lower
- **status**: open --> closed-fixed
- **Comment**:
right, just checked and the EnableCheck was not added properly anymore.
FeatureInstaller.addMainMenuPlugin() uses the Interface EnableChecked to fetch
the checks automagically. i forgot to check if the method in PythonToolsPlugIn
properly
- **Milestone**: OJ_future --> OJ_1.16
---
** [bugs:#506] Python console and tools issues**
**Status:** open
**Milestone:** OJ_1.16
**Created:** Tue Sep 15, 2020 01:00 PM UTC by ede
**Last Updated:** Sun Oct 04, 2020 10:17 AM UTC
**Owner:** nobody
the EnableCheck seems not to work. it says
hey John,
please try snapshot r6539. not exactly what you are asking for but close enough
for now i guess. just simply have no clue how to convince Izpack to switch the
panel automatically
..ede
---
** [feature-requests:#270] Enhancement: Windows Installer "Installation
Complete. Click
---
** [bugs:#506] Python console and tools issues**
**Status:** open
**Milestone:** OJ_future
**Created:** Tue Sep 15, 2020 01:00 PM UTC by ede
**Last Updated:** Tue Sep 15, 2020 01:00 PM UTC
**Owner:** nobody
the EnableCheck seems not to work. it says it need an active taskframe. you can
---
** [bugs:#505] Customize -> Beanshell Editor Plugin opens unlimited dialog
windows every time it is executed**
**Status:** open
**Milestone:** OJ_future
**Created:** Mon Sep 14, 2020 02:36 PM UTC by ede
**Last Updated:** Mon Sep 14, 2020 02:36 PM UTC
**Owner:** michael michaud
as they
---
** [bugs:#504] TODO: OJ2.x**
**Status:** open
**Milestone:** OJ_2.x
**Created:** Mon Sep 14, 2020 11:44 AM UTC by ede
**Last Updated:** Mon Sep 14, 2020 11:44 AM UTC
**Owner:** nobody
this is not actually a bug ticket, but a notepad for backward compatible
breaking things to do in
On 9/14/2020 9:13, michael michaud wrote:
> Seems to me that Sextante Raster and Commons Imaging referencing are correct
> and that other ones are shifted. I don't know why images loaded with Commons
> Imaging are not referenced as others. Ede, any hint to help me understand
> which loader uses
On 9/14/2020 11:36, Jukka Rahkonen wrote:
> IMHO Jasper and jj2000 are rather useless for geospatial images. OpenJPEG is
> quite nice nowadays, open source, and getting better so +1 for having it as
> the first option.
>
will reorder accordingly.
Jukka, did you ever try
JP2KAK (avail in OJ
On 9/14/2020 10:16, Jukka Rahkonen wrote:
> I have noticed that if OJ project is open for many days then the attribute
> view behaves badly. For example the icons on the top of the view are not
> visible, but they may come visible is I hover over the icon panel. I use
> Windows 10 and Corretto
On 9/14/2020 9:27, michael michaud wrote:
> Thanks for this fix ede. I could read successfully images with native open
> jpeg and ecw and I agree that we should use openjpeg first.
just packaged the latest greatest GDAl and et voila ;)
>With ImageIO JPEG 2000 Image Reader, I still get an image
- **Milestone**: --> OJ_1.16
- **Comment**:
Peppe is this still working? if yes please close as fixed. ..ede
---
** [bugs:#422] Bug in jython tools**
**Status:** pending
**Milestone:** OJ_1.16
**Created:** Wed Jun 01, 2016 06:13 AM UTC by michael michaud
**Last Updated:** Thu Oct 20, 2016
- **assigned_to**: michael michaud
- **Comment**:
Mike, could you list the persisting issues please so they can be fixed one by
one later?
wil tag it as OJ_future as it is not blocking OJ_1.16
---
** [bugs:#152] OJ styling bugs and issues**
**Status:** open
**Milestone:** OJ_future
- **Operating System**: --> not specified
- **Milestone**: --> OJ_future
- **Comment**:
Mike, could you list the persisting issues please so they can be fixed one by
one later?
wil tag it as OJ_future as it is not blocking any release
---
** [bugs:#152] OJ styling bugs and issues**
- **Operating System**: --> not specified
- **Milestone**: --> OJ_1.16
- **Comment**:
Peppe, could you test this please? ..thx ede
---
** [bugs:#175] Bug random behavior of Save Image to Raster**
**Status:** open
**Milestone:** OJ_1.16
**Labels:** General / Other
**Created:** Wed Feb 09,
- **Operating System**: --> not specified
- **Milestone**: --> OJ_1.16
- **Comment**:
Peppe, what's the state of this? ..ede
---
** [bugs:#89] label offset should be set according to symbol size**
**Status:** open
**Milestone:** OJ_1.16
**Created:** Fri Jul 13, 2007 08:51 AM UTC by
- **Operating System**: --> not specified
- **Milestone**: --> OJ_future
- **Comment**:
Jukka or everybody else would you please try to reproduce this and come back
with a urgency estimate. will tag it as OJ_future for now as it is pretty vague
..ede
---
** [bugs:#197] Menu edit too
- **Operating System**: --> Windows
- **Milestone**: --> OJ_future
- **Comment**:
will tag it as OJ_future. Mike if you want to have a go at it feel free to tag
it as OJ_1.16.. ede
---
** [bugs:#223] Theming/Classifcation selector jumps back to: equal interval**
**Status:** open
- **labels**: OpenJUMP - Menu - File --> OpenJUMP - Menu - File
- **status**: open --> closed-fixed
- **Operating System**: --> Windows
- **Milestone**: --> undecided
- **Comment**:
closing this as fixed - the image framework was overhauled inbetween and will
probably read the file which we
- **Operating System**: --> Linux/Unix
- **Milestone**: --> OJ_1.16
- **Comment**:
Peppe, can you check this again please with snapshot and recent openjdk? thx
..ede
---
** [bugs:#291] Problem on drop-down menus**
**Status:** open
**Milestone:** OJ_1.16
**Labels:** General / Other
- **Operating System**: --> Windows
- **Milestone**: --> OJ_future
---
** [bugs:#312] Menu slow down**
**Status:** open
**Milestone:** OJ_future
**Labels:** General / Other
**Created:** Mon Apr 22, 2013 09:34 PM UTC by michael michaud
**Last Updated:** Mon Apr 22, 2013 09:34 PM UTC
- **labels**: OpenJUMP - Menu - File --> OpenJUMP - Menu - File
- **Operating System**: --> MacOSX
- **Milestone**: --> OJ_2.x
- **Comment**:
the file dialogs areoperating system specific. just checked and even on recent
OSX 1.15 Catalina the 'add folder' button is missing. will need to find
- **Priority**: 5 --> 9
- **Milestone**: --> OJ_future
- **Comment**:
good things come to those who wait or so
---
** [bugs:#315] Shortcut weirdness when Layer Tree has the focus**
**Status:** open
**Milestone:** OJ_future
**Labels:** OpenJUMP - Toolbox and Buttons
**Created:** Mon May 13,
- **Operating System**: --> Windows
- **Milestone**: --> OJ_2.x
- **Comment**:
which leaves
One current problem happens if layer B of project B is selected, and Attribute
table of layer A of project A is the active frame : most plugins are
initialized with layer B, not A.
Some suggestions :
- **Milestone**: --> OJ_1.16
- **Comment**:
Mike, wasn't that fixed a long time ago? ..ede
---
** [bugs:#363] Dataset charset not visible**
**Status:** open
**Milestone:** OJ_1.16
**Created:** Tue May 06, 2014 07:56 PM UTC by michael michaud
**Last Updated:** Thu May 28, 2015 10:47 AM UTC
- **Milestone**: --> OJ_1.16
- **Comment**:
Jukka, could you provide recent background? is it still not working?
if so, we have 2 alternatives
- fixing ("hard")
- removing the feature (easy)
which would you suggest. ..ede
---
** [bugs:#382] Delete Incremental Warping Vector tool does not
- **Milestone**: --> OJ_future
- **Comment**:
let's keep an eye on it. after all it's hanging here since 5 years. not
blocking OJ 1.16
---
** [bugs:#389] Detached Attribute table buggy**
**Status:** open
**Milestone:** OJ_future
**Created:** Sat Feb 07, 2015 04:55 PM UTC by michael michaud
- **Milestone**: --> OJ_future
- **Comment**:
let's keep an eye on it. not blocking OJ 1.16
---
** [bugs:#419] NPE thrown when selecting feature**
**Status:** open
**Milestone:** OJ_future
**Created:** Mon Mar 21, 2016 11:13 PM UTC by michael michaud
**Last Updated:** Mon Mar 21, 2016 11:13
- **Milestone**: --> OJ_2.x
- **Comment**:
i'd say it's solved. but regardless it's not blocking OJ 1.16
---
** [bugs:#430] JP2 reader does not read all jp2 files**
**Status:** open
**Milestone:** OJ_2.x
**Created:** Sat Oct 01, 2016 09:56 AM UTC by michael michaud
**Last Updated:** Sun Sep
as i wrote directly above your post. nope.
---
** [bugs:#496] OpenJUMP 1.15 freezes on loading project files from differing
versions**
**Status:** open
**Milestone:** OJ_future
**Created:** Tue Aug 11, 2020 10:35 AM UTC by ede
**Last Updated:** Sun Sep 13, 2020 04:22 PM UTC
**Owner:** nobody
we should probably thinking about adding a MEGA distro containing GDAL as most
users are probably completely unaware of this OJ functionality
---
** [bugs:#430] JP2 reader does not read all jp2 files**
**Status:** open
**Milestone:**
**Created:** Sat Oct 01, 2016 09:56 AM UTC by michael
according to the below testing i would suggest we prioritize as follows when
offering readers
GDAL OpenJPEG JP2K Image Reader, version 1.1, OpenJUMP
GDAL ECW JP2K Image Reader, version1.1, GeoSolutions/OpenJUMP
ImageIO JPEG 2000 Image Reader, version 1.1, Sun Microsystems, Inc.
..ede
some
- **Milestone**: --> OJ_future
---
** [bugs:#444] native ECW sdk loader _not_ initialized when GDAL is available**
**Status:** open
**Milestone:** OJ_future
**Created:** Sun Nov 13, 2016 03:48 PM UTC by ede
**Last Updated:** Wed Dec 28, 2016 12:53 PM UTC
**Owner:** nobody
currently
- **Milestone**: --> OJ_future
- **Comment**:
tag it as to be solved in the future as it's unclear what the problem is, if at
all something on our end.
---
** [bugs:#496] OpenJUMP 1.15 freezes on loading project files from differing
versions**
**Status:** open
**Milestone:** OJ_future
- **Milestone**: undecided --> OJ_1.16
- **Comment**:
Mike, whats's the status of this? can we close it?
---
** [bugs:#499] SelectFilesOptionPanel and extensions**
**Status:** open
**Milestone:** OJ_1.16
**Created:** Sun Aug 30, 2020 09:43 AM UTC by michael michaud
**Last Updated:** Sun Aug
- **Milestone**: undecided --> OJ_2.x
---
** [bugs:#501] I18N from extension**
**Status:** open
**Milestone:** OJ_2.x
**Created:** Mon Aug 31, 2020 10:32 AM UTC by michael michaud
**Last Updated:** Mon Aug 31, 2020 05:15 PM UTC
**Owner:** nobody
Ede, I prefer to document the usage of I18N
- **Milestone**: undecided --> OJ_1.16
---
** [bugs:#503] 1/2 pixel shift in image georeferencement**
**Status:** open
**Milestone:** OJ_1.16
**Created:** Sun Sep 13, 2020 09:52 AM UTC by michael michaud
**Last Updated:** Sun Sep 13, 2020 11:32 AM UTC
**Owner:** nobody
There is still 1/2
- **summary**: Add image layer throwing exception --> Add image layer throwing
NPE
- **status**: open --> closed-fixed
- **Milestone**: --> undecided
- **Comment**:
fixed in r6457
---
** [bugs:#451] Add image layer throwing NPE**
**Status:** closed-fixed
**Milestone:** undecided
On 13.09.2020 11:48, michael michaud wrote:
> Ede, can you tell me why this error (NoClassDefFoundError) is expected ?
some JAI internal thing connected to hardware acceleration not available that
is thrown on the first use and has not negative impact that i know of.
> Anyway, if it is, I
On 13.09.2020 11:35, michael michaud wrote:
> **peppe's geotiff** : this is a float32 monoband raster. I could only read it
> with Sextant Raster and with Commons Imaging (strange psychedelic apperance
> with Commons Imaging though). Other readers through exception (IOOBE) while
> reading, not
Peppe,
please retest with r6451. ..ede
---
** [bugs:#498] Most GeoTIFF drivers fail with a simple GeoTIFF image**
**Status:** open
**Milestone:** OJ_future
**Created:** Sun Aug 30, 2020 08:02 AM UTC by michael michaud
**Last Updated:** Sat Sep 12, 2020 11:54 AM UTC
**Owner:** nobody
On 12.09.2020 11:31, michael michaud wrote:
> I tried to handle errors in a more friendly way in r6443, but it seems that
> the best improvement wrt this ticket has been made by changing old jai libray
> by the new oss version. Thanks EDE.
my patchset unfortunately disabled GeoImage framework
thanks for testing Peppe. i actually made sure that the monoband geotiff you
sent once me would properly load after the switch still. talking about the
attached.
wrt. to closing this ticket - yeah let's clear up the monoband issue and close
then.
Attachments:
-
wrt. to Standard TIFF Image reader from sun. since jdk9 or later it needs
--add-exports java.desktop/com.sun.imageio.plugins.tiff=ALL-UNNAMED
to access the specific imageio package.
added that to our startup scripts in rev 6427
https://sourceforge.net/p/jump-pilot/code/6427/
---
**
wrt. Commons Imaging - tested with commons-imaging-1.0-alpha2.jar the issue
still remains.
i logged a bug in their tracker, let's see how it pans out
https://issues.apache.org/jira/projects/IMAGING/issues/IMAGING-265?filter=allopenissues
---
** [bugs:#498] Most GeoTIFF drivers fail with a
- **Milestone**: OJ_1.16 --> OJ_future
- **Comment**:
won't be fixed soonish, tag it accordingly
---
** [bugs:#498] Most GeoTIFF drivers fail with a simple GeoTIFF image**
**Status:** open
**Milestone:** OJ_future
**Created:** Sun Aug 30, 2020 08:02 AM UTC by michael michaud
**Last
On 9/4/2020 11:57, Giuseppe Aruta wrote:
> WarpingPanelPlugin moved from version 9 (2005) to verison 6423 (2020) :-(
is that a problem?
---
** [bugs:#495] Warp panel shows a vertical toolba instead of horizontal on
Ubuntu**
**Status:** closed-works-for-me
**Milestone:** OJ_future
i'm not opposed. it's a workaround though as the way it is set up now is
clearly at fault. anyway. feel free to patch, test and close the ticket. ..ede
On 9/4/2020 11:44, Giuseppe Aruta wrote:
> Hi Ede,
> the problem is only on warp plugin toolbar.
> The proposed modification
i see. so it assentially loads and shows but the additional pixel data is
missing. ok, can't help with that. maybe you want to take a peek how other
JUMPSs/Java apps access those and implement it in OJ? good to have sample
online as well.
if it used to work earlier try to identify the patchset
On 9/4/2020 9:01, Giuseppe Aruta wrote:
> Since I have problems to display Aster tiff files, possibily due to the
> precence of overviews, I am considering to add a plugin to convert a file
> image (TIFF in this case) directly without loading into OJ view
can you attach an Aster Tiff
could you Guys,
please test svg export again? i am not sure i added alle necessary batik jars.
i tried exporting SVG vectors and an image and it looked good. just to be
sure.. thx ede
On 01.09.2020 17:26, Giuseppe Aruta wrote:
> Hi Ede,
> I didi some test, now everything works fine, thanks.
>
Peppe please try snapshot r6403
https://sourceforge.net/projects/jump-pilot/files/OpenJUMP_snapshots/OpenJUMP-Portable-20200901-r6403-PLUS.zip
---
** [bugs:#500] possible important bug on Batik 1.6.1**
**Status:** open
**Milestone:** OJ_1.16
**Created:** Sun Aug 30, 2020 03:17 PM UTC by
my bad. `` was the problem and empty `` or non-existing
`` tag is what was fixed. you can test against
`http://jamoke.net/getcap.xml`
..ede
---
** [bugs:#491] WMS getCapability without title**
**Status:** closed-fixed
**Milestone:** OJ_1.16
**Created:** Mon Jan 13, 2020 08:35 PM UTC by
so it was the batik upgrade, just not batik itself. ;) it's pulling in an
outdated xalan dependency. see attached `mvn dependency:tree`reports for
pom.xml with `1.6-1` on the left and
`1.6` on the right.
at this point i'd say eff it, also because batik 1.6-1 draws in 5MB more deps
and just
so it shall be done in OJ 2.x .. ede
On 31.08.2020 20:03, Giuseppe Aruta wrote:
>> I18N.getInstance("my.great.extension").get(String)
>
> seems more logical and easy to use
>
>
> Il lun 31 ago 2020, 18:58 ede via Jump-pilot-devel <
> jump-pilot-devel@lists.s
On 31.08.2020 19:15, michael michaud wrote:
> Yes, neat, i'm ok with this proposition ;-)
> Does it mean you would also remove getMessage variant ?
absolutely. only the mentioned methods will survive. the milestone is already
set to OJ2. let's tackle it then. ..ede
---
** [bugs:#501] I18N
On 8/31/2020 18:19, michael michaud wrote:
> String getText(Syting label)
> String getText(Syting label, Object...objects)
> static String get(Syting label) // legacy
> static String getMessage(Syting label)
> static String getMessage(Syting label, Object...objects)
>
> must remove :
> static
hey Mike,
ohh fun..
there is already a static I18N.get(String key) method ;(.. looks like legacy
i'll add I18N.get(String key, Object ...) instance method for now. and we'll
get rid of the static version in OJ2. ok?
..ede
---
** [bugs:#501] I18N from extension**
**Status:** open
On 8/31/2020 14:26, ede wrote:
> tl;dr Runtime.addShutdownHook() should run
> com.vividsolutions.jump.workbench.ui.WorkbenchFrame.closeApplication() done.
>
> implemented for testing in r6400
well. according to my tests that does a lot of nothing.in the best case
1.
run with 'java' so you have
- **status**: open --> pending
- **assigned_to**: ede
- **Operating System**: --> Windows
- **Milestone**: --> OJ_1.16
- **Comment**:
applications i work with do not save anything without being explicitly told so.
even on windows shutdown. the application simply don't exit and i'll have to
committed a fix
fix #482: disable regedit call and always allow selection of
ArcGIS_SLD_Converter.exe with the previous selected location preselected
let's keep it in OJ 1.16, but remove it in OJ 2.x where lot's of extensions
will be missing anyway initially.
..ede
---
** [bugs:#482]
1 - 100 of 150 matches
Mail list logo
