Re: [j-nsp] MPLS for management VPN question

Truman Boyes schrieb: Hi, thanks for your answer so far. You then need to define a route-distinguisher, and route targets (or simply vrf-target under the VRF) to import/export the routes for this VPN from other PEs. Can you provide an example for that? That would be a L3VPN, right? Why

Re: [j-nsp] MPLS for management VPN question

Jeff, This isn't typically something that can be described in just a few short emails, as there are so many ways to do things. However, that said, here is a short sample config for an L3VPN VRF: j...@br01. show configuration routing-instances VPN.TEST { instance-type vrf; interface

Re: [j-nsp] MPLS for management VPN question

Some notes inline: On 4/06/2009, at 9:13 PM, Jeff Meyers wrote: Truman Boyes schrieb: Hi, thanks for your answer so far. You then need to define a route-distinguisher, and route targets (or simply vrf-target under the VRF) to import/export the routes for this VPN from other PEs. Can

[j-nsp] Experience of Adding New RE in M20

One of my customer is using M20 as GGSN in their GSM network. They had two RE and Primary RE got HW problem so they unplugged it from Router. Now they have got their replacement HW from JTAC. What would be the procedure to adding New RE to GGSN (M20) without interrupting service? JUNOS version of

Re: [j-nsp] MPLS for management VPN question

The management VPN configuration is for example going to be like the following: mgmt { description -- management vpn --; instance-type vrf; # - e.g. management vlan 100 interface ge-0/0/0.100; interface lo0.110; vrf-export mgmt-export-policy; vrf-target import

[j-nsp] PPPOE Termination - J2320?

Hi folks. I'm wondering if the J2320 or other J series routers can act as an access concentrator for PPPOE clients? According to the docs it appears this platform can only act as a PPPOE client but looking to confirm. Thanks, Paul Stewart

Re: [j-nsp] Experience of Adding New RE in M20

Hello! The GGSN RE in a J20 (it is not a M20 ;-) is not running standard JUNOS. It is JUNOS + Ericsson software module handled by Ericsson. So you need to be running this special JUNOS version controlled by Ericsson and get it from them. Dont download a JUNOS from Juniper homepage and use that,

Re: [j-nsp] Experience of Adding New RE in M20

*Thinks* Hopefully the under mentioned helps if I didn't make any mistake. Ha ! Ensure your new routing engine has all the necessary storage space Do a snapshot on your GGSN box Use the primary RE to do the upgrading on the secondary RE by specifying the engine slot *** Either one / Which