Alex,
On 19/10/12 7:33 AM, Alex Arseniev wrote:
You could do cascaded PM. In a nutshell:
1/ port-mirror original packet, send the original packet on its way
2/ send the COPY into a loop (cable loop or looped tunnel)
3/ take the looped COPY and mirror it once again, creating 2nd copy.
4/ send
Have you tried PM instances?
- Original Message -
From: Paul Vlaar p...@vlaar.net
To: Alex Arseniev alex.arsen...@gmail.com
Cc: juniper-nsp@puck.nether.net
Sent: Friday, October 19, 2012 9:49 AM
Subject: Re: [j-nsp] port mirror to multiple ports on MX80 in inet6
Alex,
On 19/10/12
Hey Guys,
Im wondering what code recommendation the list would make for the following
platforms:
EX2200-C-PWR
SRX210BE
I am currently running 10.4R9.2 on the SRX, as this was the code previously
certified by my former employer for SRX3600 and SRX5800 deployments in our
infrastructure. EX was
Hi all,
Does anybody know which source IPv6 address is used by a Juniper router to send
back an ICMPv6 Packet too Big. If I configure the default address selection
feature and have an IPv6 address on my loopback ? Does it use this address or
still use the IPv6 interface address ?
thanks
David
http://kb.juniper.net/InfoCenter/index?page=contentid=KB21476actp=RSS
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Thanks Marco
On Fri, Oct 19, 2012 at 11:28 AM, Marco Nesler sat...@gmail.com wrote:
http://kb.juniper.net/InfoCenter/index?page=contentid=KB21476actp=RSS
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
What I do is plug the monitor (output) port into a switch with a
separate monitoring VLAN and then set the destination MAC address to
an unknown one like 02:02:02:02:02:02--the switch will forward all the
unknown traffic to all ports in the monitoring VLAN. Works great with
an EX4200 (on which
Does Juniper supports Half fuplex vrf?
Thanks
BR,
Mohammad
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Please check the link for more clarification
http://www.cisco.com/en/US/docs/ios/ios_xe/mpls/configuration/guide/mp_vpn_half_dup_vrf_xe.pdf
BR,
Mohammad
On Sat, Oct 20, 2012 at 1:52 AM, Daniel Hilj daniel.h...@ipnett.se wrote:
What do you mean by that??
//Daniel
20 okt 2012 kl. 00:34
What do you mean by that??
//Daniel
20 okt 2012 kl. 00:34 skrev Mohammad Khalil eng.m...@gmail.com:
Does Juniper supports Half fuplex vrf?
Thanks
BR,
Mohammad
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
Daniel Hilj [daniel.h...@ipnett.se] wrote:
What do you mean by that??
He means that the concept is applicable on any implementation. It's not a
special feature that has to be designed in. The cisco configuration should be
trivial to translate to junos.
People,
We have 4 x EX4200 (4200-24F and EX4200-48T) running 12.1R3.5 code
connected using Virtual Chassis configuration.
The configuration is very simple with 2 vlans. VLAN - LAN vlan id 10.
The problem is related to traffic monitor software (wireshark for instance).
When we connect
12 matches
Mail list logo