Re: [j-nsp] interoperation between MSTP and old STP

Ben Dale wrote: I have several EX4200 switches with redundant links, all are running MSTP with a couple of MSTIs. If I include an older switch which can only run old-fashioned STP, will they interoperate and still keep the topology loop-free? What if it can run STP and RSTP, but

[j-nsp] Quick way to Shift MPLS traffic away from an interface

Hello, What is the quick way to shift LSP traffic from an interface after increasing the igp metric? question: - What command can I use to find all lsp traversing the iface and a good way to clear them? I am assuming I would need to run clear mpls optimize-aggressive on the lsp's on that

Re: [j-nsp] Quick way to Shift MPLS traffic away from an interface

Hi Tim, If you are using LDP then traffic will automatically switch to follow the IGP. No clearing of LSPs required. Regards, Dave On 21 May 2015 18:49, tim tiriche tim.tiri...@gmail.com wrote: Hello, What is the quick way to shift LSP traffic from an interface after increasing the igp

Re: [j-nsp] JTAC Recommended Junos Software Versions Old?

Hi Adam, Apologies for the delay, I have just run your search and have the below: Narrow Search By [image: Down Arrow] Resolved In Fixed in 12.3R8(86) Fixed in between(285) Fixed in 13.3R6(128) Fixed later (382) Unresolved(122) [image: Down Arrow] Status Closed(500+) Open(293) [image: Down

Re: [j-nsp] Child process error message

Again the issue occurs. Finding the flowd_hm process is high and router is consuming lot of memory. rt@FAZJ2320R-1 show system processes extensive last pid: 2625; load averages: 0.19, 0.18, 0.17 up 0+06:20:14 20:08:08 123 processes: 4 running, 102 sleeping, 17 waiting Mem: 222M Active,

Re: [j-nsp] Quick way to Shift MPLS traffic away from an interface

Hi, I assume that you are talking for RSVP signaled LSPs. clear mpls optimize aggressive-optimize - will work only on the ingress PE. There are some scripts that you can use to find out what LSPs are transiting particular interface - like this one script

[j-nsp] Fwd: Quick way to Shift MPLS traffic away from an interface

Hello, What is the quick way to shift LSP traffic from an interface after increasing the igp metric? question: - What command can I use to find all lsp traversing the iface and a good way to clear them? I am assuming I would need to run clear mpls optimize-aggressive on the lsp's on that

Re: [j-nsp] Distributed PPM and LACP always goes into Queue 3. host-outbound-traffic knob has no effect -- bug?

Hello, Yes I've seen and confirmed this behavior a while back as well. If you ask I'm sure you'll be told this is not a bug and would require a feature request to change. See: