.html
but have not found anything comparable for JUNOS.
Any pointers?
Thanks as always,
~Aaron
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
ospf network point-to-point
Thanks,
~Aaron
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
/128;
}
As you can see from the output below, the overlapping addresses are
live on the interfaces:
# run show interfaces terse | match ge-0/0/0.0|lo0.0
ge-0/0/0.0 upup inet62001:20:1::5/64
lo0.0 upup inet62001:20:1::1
Thanks,
~Aaron
platforms...)
Thanks again,
~Aaron
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
bgp nexthop trigger delay 0
neighbor my-peer-group advertisement-interval 0
(yes, I realize these would generally not be the most sane settings)
The only one I've found (partially) so far is:
ospf3 {
spf-delay 50;
}
(I2J does not support any of the above...)
Thanks,
~Aaron
Problem Report Number 99293 has some additional details.
Regards,
~Aaron
On 5/25/07, Aaron Daubman [EMAIL PROTECTED] wrote:
Greetings,
I'm wondering why my commit is failing with the following error:
(the error is obvious, however I don't understand why this would
matter - the same config
-
Thanks,
~Aaron
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Greetings,
I couldn't find this information on the site and thought somebody
might know off hand?
Is the PB-4OC12-SON-MM PIC 1310nm multi-mode or 850nm multi-mode?
Thanks,
~Aaron
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https
501 - 508 of 508 matches
Mail list logo