[j-nsp] inject unresolvable static route via bgp

Hello, we try to implement a route injection with a vmx to reduce the count of static routes on our core routers ( a very large amount ... ) I've the problem, that if i set a static route on the vmx, it will be advertised with the wrong next-hop ( self in this case ) The session between the

Re: [j-nsp] inject unresolvable static route via bgp

Hi Alex, yes, 2.2.2.2 is resolvable on the core router. Your hint with advertising the connected routes to the injection router, works like a charm and is a suitable solution for us. Thank you :) Best regards Alex Von: "Alexander Arseniev" An: "Alexander Dube"

Re: [j-nsp] inject unresolvable static route via bgp

Hello, Is 2.2.2.2 resolvable on a core router then? Via in interface/connected subnet perhaps? If yes then announce all conected subnets from core router(s) via iBGP to Your VMX. Then configure Your statics on VMX with "resolve" knob, and announce them via iBGP back to core router(s). Your

Re: [j-nsp] SRX NAT rule component limit

Hi, In this particular case, the sources are not located in the same location hence their IP address is not adjacent to each other hence summarization is not an option unfortunately. I am a bit surprised if Juniper has not worked on this very limited capacity yet even after quite some time,

Re: [j-nsp] Cut-through forwarding statistics on QFX5100

❦ 22 juin 2017 00:28 +0200, Thomas Bellman  : > We have a QFX5100 on which we have enabled cut-throug forwarding > ('set forwarding-options cut-through'). Now I am curious about > how effective that is. Is there any statistics one can dig out > about how often the switch is

Re: [j-nsp] Cut-through forwarding statistics on QFX5100

On 22/06/2017 11:27 PM, Nelson, Brian wrote: Model: qfx5100-96s-8q Junos: 14.1X53-D42.3 user@qfx5100-96s# set forwarding-options cut-through ? Possible completions: <[Enter]>Execute this command accounting Configure accounting of traffic analyzer Analyzer

Re: [j-nsp] Cut-through forwarding statistics on QFX5100

It is readily available in 17.2; not sure about earlier versions. branto@host# set forwarding-options ? Possible completions: > access-security Access security configuration > accounting Configure accounting of traffic > analyzer Analyzer options + apply-groups

Re: [j-nsp] Cut-through forwarding statistics on QFX5100

Model: qfx5100-96s-8q Junos: 14.1X53-D42.3 user@qfx5100-96s# set forwarding-options cut-through ? Possible completions: <[Enter]>Execute this command > accounting Configure accounting of traffic > analyzer Analyzer options + apply-groups Groups from

Re: [j-nsp] how to send SRX240 traffic/session logs to syslog server

Oh my gosh, guess what….Syslog traps were arriving at the server all along….but were going into /var/log/daemon.log …and I was grepping on /var/log/syslog :| Thanks for all your suggestions… At this point using just 2 statements for “set system syslog host …. source-address …”… I

Re: [j-nsp] Cut-through forwarding statistics on QFX5100

Sorry I don't have an answer... but interestingly, I see this as a hidden command on the cousin ACX5048... is it hidden in the QFX5100 or in plain view using the ? after set forwarding-option ? I haven't used it nor committed it further so I don't know of its functionality on this ACX5048