[j-nsp] MX480 Filter based forwarding performance

I am hoping someone can provide a good link to FBF performance, is it handled by the PFE in hardware or is it handled in software, limitations if any? I have a design that is using FBF extensively, currently we are not routing much traffic but that could change soon. thanks in advance, Mike

Re: [j-nsp] QFX 5100 and vlan rewriting

Hello Jonathan, Thanks for your answer. With "inner-vlan-id-list", I get: ## Warning: 'inner-vlan-id-list' can be used only on interface with vlan-id/vlan-tags ## Warning: 'inner-vlan-id-list' is supported only on flexible-vlan-tagging mode While the documentation says I

Re: [j-nsp] QFX 5100 and vlan rewriting

Use the inner-vlan-id-list option: https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/vlan-translation-vlan-id-list-l2.html Jonathan From: juniper-nsp on behalf of Vincent Bernat Sent: Thursday, May 17, 2018

[j-nsp] QFX 5100 and vlan rewriting

Hey! I am a bit puzzled how to do VLAN rewriting with the QFX5100. With a MX, the following configuration would work: interfaces { xe-0/0/0 { unit 0 { family bridge { interface-mode trunk; vlan-id-list [ 57 58 ]; vlan-rewrite { translate 3 57; translate 4 58; }

Re: [j-nsp] QFX5100 buffer allocation

On 2018-05-17 02:41, Brian Rak wrote: > We're not even doing 10gbit of traffic, so the buffers should last at > least a little bit. And you're not hitting 10 Gbit/s even under very short bursts of a few milliseconds? Microbursts like that don't show up in "normal" usage graphs where you only