For the ACX line, what is the Maximum number of MPLS labels in a packet’s
label stack (push, pop, and swap operations)? Specifically, mostly
interested in the ACX5048 and ACX2200's
I found the following chart for the QFX line, and it was extremely helpful.
I haven't been able to find the same
Dear experts,
do you have any suggestion where I can find useful information over www in
order to provide DC interconnection of my two merging customers where one
is running MPLS/VPLS with Juniper technology and the other one EVPN/VXLAN
with Cisco ?
The customer would like to explore the
Hi Karsten,
Thanks for the link, I wasn't aware of such KB article, although there are
several other articles related to native-vlan handling.
The QFX5110 in question was previously running 17.3R3-S3 and there the
native-vlan was indeed double-tagged on the uplink, just like the table says.
--- Begin Message ---
Hi,
I haven't tested the behvaior, but to avoid the big surprises you should at
least check the tables in
the kb:
https://kb.juniper.net/InfoCenter/index?page=content=KB35261=RSS
As you're not writing the exact release, there was a change if you upgraded
from R1 or R2.
Hi list,
Returning to this old thread. It seems that the behaviour has again changed,
because after upgrading QFX5110 to 18.4R3-S7 the switch does not add the
native-vlan tag when forwarding the frame to QinQ uplink. Previously with
version 17.3 the switch did add the native-vlan tag along
5 matches
Mail list logo
