Re: [j-nsp] MTU problems over VPLS

2013-02-13 Thread david.roy
Which release do you use ? Experienced some mpls mtu issue on trio platform. Known PR... Envoyé de mon iPad Le 12 févr. 2013 à 22:17, Luca Salvatore l...@ninefold.com a écrit : I have a few sites connected via a VPLS core. The core devices are all MX 10 routers connected via 10Gb fibre.

Re: [j-nsp] MTU problems over VPLS

2013-02-13 Thread Luca Salvatore
@puck.nether.net Subject: Re: [j-nsp] MTU problems over VPLS Which release do you use ? Experienced some mpls mtu issue on trio platform. Known PR... Envoyé de mon iPad Le 12 févr. 2013 à 22:17, Luca Salvatore l...@ninefold.com a écrit : I have a few sites connected via a VPLS core. The core devices

Re: [j-nsp] MTU problems over VPLS

2013-02-13 Thread Eduardo Barrios
with Alcatel. HTH, Eduardo -Original Message- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Luca Salvatore Sent: Tuesday, February 12, 2013 12:58 AM To: juniper-nsp@puck.nether.net Subject: [j-nsp] MTU problems over VPLS I have a few

Re: [j-nsp] MTU problems over VPLS

2013-02-13 Thread Robert Hass
On Tuesday, February 12, 2013, Luca Salvatore wrote: I have a few sites connected via a VPLS core. The core devices are all MX 10 routers connected via 10Gb fibre. I'm having problems doing file copies (SCP between two Centos VMs). hi can you put configuration ? you cam tune up mtu for vpls

Re: [j-nsp] MTU problems over VPLS

2013-02-13 Thread Chris Kawchuk
How does one send back an ICMP please-fragment-this Message when you're emulating a blue wire? No router in the middle to send back to the customer. it's an L2 service. You're transparent to them IP-wise. No IP interface anywhere inside their bridge to source a packet from. - Ck. On

Re: [j-nsp] MTU problems over VPLS

2013-02-13 Thread david.roy
@orange.com [mailto:david@orange.com] Sent: Wednesday, 13 February 2013 8:24 AM To: Luca Salvatore Cc: juniper-nsp@puck.nether.netmailto:juniper-nsp@puck.nether.net Subject: Re: [j-nsp] MTU problems over VPLS Which release do you use ? Experienced some mpls mtu issue on trio platform

Re: [j-nsp] MTU problems over VPLS

2013-02-13 Thread Benny Amorsen
Luca Salvatore l...@ninefold.com writes: I have a few sites connected via a VPLS core. The core devices are all MX 10 routers connected via 10Gb fibre. I'm having problems doing file copies (SCP between two Centos VMs). The issue is that the file copy never gets anywhere, on the Centos CLI

Re: [j-nsp] MTU problems over VPLS

2013-02-13 Thread Luca Salvatore
February 2013 8:33 AM To: Luca Salvatore Cc: juniper-nsp@puck.nether.net Subject: Re: [j-nsp] MTU problems over VPLS We hit this PR but should be fixed in your release. Double check with JTAC if there is no regression or corner case? David Problem Report Number PR568550 Title With default

Re: [j-nsp] MTU problems over VPLS

2013-02-13 Thread Huan Pham
Hi Luca, I believe this is expected behaviour. Your VPLS infrastructure only supports max MTU of 14xx (1500- MPLS/VPLS/TE etc overhead). If your Layer 3 CPE device connected to the VPLS cloud sets default MTU of 1500 then it will try to send those 1500 byte packets, without knowing that they

[j-nsp] MTU problems over VPLS

2013-02-12 Thread Luca Salvatore
I have a few sites connected via a VPLS core. The core devices are all MX 10 routers connected via 10Gb fibre. I'm having problems doing file copies (SCP between two Centos VMs). The issue is that the file copy never gets anywhere, on the Centos CLI it sits at 0% then says 'stalled' To fix