[j-nsp] Any sort of EVPN Success with: vMX 16.x and QFX5100

2016-10-07 Thread Alain Hebert
whitepapers. Took 1/2 a day to figure out we needed 16.x for the vMX part of the equation. Oh and some peer review =D White paper in question: https://www.juniper.net/assets/us/en/local/pdf/whitepapers/2000606-en.pdf - Alain Hebertaheb...@pubnix.net

Re: [j-nsp] EVPN -VXLAN in production

2016-11-25 Thread Alain Hebert
Good luck. - Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770 Beaconsfield, Quebec H9W 6G7 Tel: 514-990-5911 http://www.pubnix.netFax: 514-990-9443 On 11/25/16 11:51, Alexander Bochmann wrote: > ...on

[j-nsp] QFX 5100 and Q-in-Q

2017-03-24 Thread Alain Hebert
ject? Thank. -- ----- Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770 Beaconsfield, Quebec H9W 6G7 Tel: 514-990-5911 http://www.pubnix.netFax: 514-990-9443 ___ juniper-nsp mailing

Re: [j-nsp] RES: RES: QFX 5100 and Q-in-Q

2017-03-27 Thread Alain Hebert
gt;1Gbps QinQ. l2circuits works perfectly thou. - Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770 Beaconsfield, Quebec H9W 6G7 Tel: 514-990-5911 http://www.pubnix.netFax: 514-990-9443 On 03/25/17 14:00, Alexandre Gu

Re: [j-nsp] RES: QFX 5100 and Q-in-Q

2017-03-24 Thread Alain Hebert
Hi, Thank you for the feedback. I'll have to confirm with the other engineer, but for sure, with 14.1X53-D42.3, PVST+ is not working. Packets comes out untagged at the other end :( Even with the knob documented in JunOS for QFX5100. - Alain Hebert

[j-nsp] QFX 5100 Q-in_Q + mac rewrite in the same switch or VCF

2017-03-17 Thread Alain Hebert
... -- - Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770 Beaconsfield, Quebec H9W 6G7 Tel: 514-990-5911 http://www.pubnix.netFax: 514-990-9443 ___ juniper-nsp mailing list juniper-nsp

Re: [j-nsp] Any sort of EVPN Success with: vMX 16.x and QFX5100

2017-07-31 Thread Alain Hebert
feel like I'm getting trolled by J. That whole QFX+L2TP+VCF really didn't help ) PS: We pretty much gave up on that whole none of the whitepaper from J work in a lab setting since they forgot to list the hardware and the Junos version they used. - Alain Hebert

Re: [j-nsp] MX240+QFX5100 using Fusion - Any positive experience

2017-08-15 Thread Alain Hebert
Hi, Can you provide a "show version" and "show chassis satellite softwar" Might be faster just to match your version. - Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770 Beaconsfield, Quebec

[j-nsp] MX240+QFX5100 using Fusion - Any positive experience

2017-08-10 Thread Alain Hebert
cannot be installed. 4. Yes the optic are the same that those working in our QFX Junos native; And no amount of GoogleFu could find a solution. Our next step is JTAC. -- - Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box

Re: [j-nsp] MX240+QFX5100 using Fusion - Any positive experience

2017-08-10 Thread Alain Hebert
s-Primary Addresses, Flags: Is-Default Is-Preferred Is-Primary Destination: 9.9.9/24, Local: 9.9.9.9, Broadcast: 9.9.9.255 Protocol multiservice, MTU: Unlimited - Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770

Re: [j-nsp] J-NSP list working ?

2017-07-10 Thread Alain Hebert
Or we gave up =D - Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770 Beaconsfield, Quebec H9W 6G7 Tel: 514-990-5911 http://www.pubnix.netFax: 514-990-9443 On 07/08/17 14:58, Job Snijders wrote: I got this message

[j-nsp] MX240 (orMX960) with QFX5100 in Fusion

2017-07-19 Thread Alain Hebert
Hi, Anyone has feedback about Fusion when MX240-MX960 and QFX5100 are concerned. Our foray into QFX5100/VCF only was not very successful. :( -- - Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770 Beaconsfield

Re: [j-nsp] Juniper QFX 5100 - Second source of QSFP -and- VCF issues resolved... for now.

2017-05-03 Thread Alain Hebert
Hi, As for a bit before 14.1X53-D42.3 (sorry I do not have the exact version) NSSU worked on the 6 members fab with 2 re, all QFX 5100. That's a plus. - Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770

Re: [j-nsp] Juniper QFX 5100 - Second source of QSFP -and- VCF issues resolved... for now.

2017-05-09 Thread Alain Hebert
, Quebec H9W 6G7 Tel: 514-990-5911http://www.pubnix.net Fax: 514-990-9443 On 05/02/17 07:18, Alain Hebert wrote: Hi, Beside Juniper, anyone have some successful experience to share about a second source of QSFP+-40-LR4? All the optics tested from our usual rock solid

Re: [j-nsp] A wierd problem with QinQ at QFX5100

2017-06-01 Thread Alain Hebert
And PFE crashing when de-provisioning some IP customer in VCP with a CCC customer near by =D - Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770 Beaconsfield, Quebec H9W 6G7 Tel: 514-990-5911 http://www.pubnix.net

[j-nsp] Juniper QFX 5100 - Second source of QSFP -and- VCF issues resolved... for now.

2017-05-02 Thread Alain Hebert
) is finally stable with the preferred release of Junos, TLDR: You cannot get out of the Spine/Leaf paradigm (contrary to initial documentation which also showed full mesh and linked routing engines). Also there was an issue with 1 forwarding-options. -- - Alain Hebert

Re: [j-nsp] ACX5048 - 40 gbps ER 40 km optic

2017-10-13 Thread Alain Hebert
    Well,     We had a few issues with FS.com devices in our QFX's.     We're still looking if its the platform or FS.com.     Although we replaced them with Juniper certified devices from optic.ca and its going better for the past 3 weeks. - Alain Hebert

Re: [j-nsp] QFX 5100 can you mix vlan-ccc + vlan-bridge on the same interface with 14.1X53-D43.7

2017-09-28 Thread Alain Hebert
stack.  1 port being only the 2 vlan-ccc and the other being the 2 vlan-bridge of the VLANs we wanted to CCC out of that aeX. - Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770 Beaconsfield, Quebec H9W 6G7 Tel: 514-990-5911

[j-nsp] QFX 5100 can you mix vlan-ccc + vlan-bridge on the same interface with 14.1X53-D43.7

2017-09-28 Thread Alain Hebert
    But it works in our lab         Model: qfx5100-48s-6q         Junos: 17.2R1.13 -- - Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770 Beaconsfield, Quebec H9W 6G7 Tel: 514-990-5911 http://www.pubnix.netFax: 514-990-9443

[j-nsp] QFX 5100 and VLAN-CCC Unicast SNMP Counter wraping

2017-09-25 Thread Alain Hebert
hex and what's wraping. -- ----- Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770 Beaconsfield, Quebec H9W 6G7 Tel: 514-990-5911 http://www.pubnix.netFax: 514-990-9443 ___ juniper

Re: [j-nsp] l2circuit down one side/up another

2017-10-20 Thread Alain Hebert
Pre-Prod Lab.     ( Since its only for a redundant MX it don't matter much to perfectly match Prod for that part ) - Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770 Beaconsfield, Quebec H9W 6G7 Tel: 514-990-5911 http

Re: [j-nsp] l2circuit down one side/up another

2017-10-20 Thread Alain Hebert
    Alphabet soup mistake =D.  I never had a need for LDP alone. - Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770 Beaconsfield, Quebec H9W 6G7 Tel: 514-990-5911 http://www.pubnix.netFax: 514-990-9443 On 10/20/17 11

Re: [j-nsp] EVPN + QinQ, individual bridge-domains for CVID's

2017-10-24 Thread Alain Hebert
    Expected hack with QFX5100     PE with CVID <-> Trunk Port <-> P or PE with EVPN     Or Logical System, but we stop using those on MXs after some crashes in the past. - Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.

Re: [j-nsp] EVPN + QinQ, individual bridge-domains for CVID's

2017-10-24 Thread Alain Hebert
from LS since we had a series of crashes in 16.x.     TLDR: Good luck =D - Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770 Beaconsfield, Quebec H9W 6G7 Tel: 514-990-5911 http://www.pubnix.netFax: 514-990-9443 On 10/24

Re: [j-nsp] Using a QFX5100 without QFabric?

2017-10-24 Thread Alain Hebert
bouncing thru the P's.         Good enough for what it is.     Must be the same deal with VPLS.     Caveats: Can't mix EVPN and/or L2 and/or CCC on the same port.  Right now EVPN+CCC works for our lab, but it must be a fluke. - Alain Hebertaheb...@pubnix.net

Re: [j-nsp] Using a QFX5100 without QFabric?

2017-10-24 Thread Alain Hebert
    Hi,     We have a stub vrf with Transit on them, the solution is a very good set of filters on lo0 input. - Alain Hebertaheb...@pubnix.net PubNIX Inc. 50 boul. St-Charles P.O. Box 26770 Beaconsfield, Quebec H9W 6G7 Tel: 514-990-5911 http