As a side note, It could be related to
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1929444 (but still
not exactly the same)
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-meta-hwe-5.19 in Ubuntu.
https://bugs.launchpad.net/
This also affects 6.5.0-15-generic:
[1.690266] rtsx_pci :3c:00.0: enabling device ( -> 0002)
[ 593.556083] rtsx_pci :3c:00.0: Unable to change power state from D0 to
D3hot, device inaccessible
--
You received this bug notification because you are a member of Kernel
Packages, wh
** Also affects: linux-meta-hwe-6.2 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-meta-hwe-5.19 in Ubuntu.
https://bugs.launchpad.net/bugs/2022308
Title:
realtek RTS525A sdcar
Public bug reported:
After upgrading to latest kernel from 6.2.0-25 to 6.2.0-26 HPSA module
appears missing and RAID-controller P410 is no longer detected. Attached
logical drive does not mount.
Reverting to 6.2.0-25 solves the issue.
ProblemType: Bug
DistroRelease: Ubuntu 23.04
Package: linux-i
The outputs of lspci also slightly differ for kernel 5.15 and kernel
5.19. On 5.15, it reports:
3c:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A
PCI Express Card Reader (rev 01)
On 5.19, it reports:
3c:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A
Public bug reported:
My integrated sdcard reader (realtek RTS525A accessed via PCI) works fine with
kernels 5.15 but does not work anymore with kernels 5.19:
[ 48.704327] rtsx_pci :3c:00.0: Unable to change power state from D0 to
D3hot, device inaccessible
[ 53.741438] rtsx_pci :3c:
Now running with
Linux 5.13.0-28-generic #31-Ubuntu SMP Thu Jan 13 17:41:06 UTC 2022
x86_64 x86_64 x86_64 GNU/Linux
plugging in a second external monitor (hdmi) either via docking station
or directly into the system itself when a usb-c monitor is attached, the
hdmi one is not recognized.
dmesg o
Hello, I updated to 5.13.0-25 and I confirm it works properly on a Ryzen
5-3600G.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1956401
Title:
amdgpu hangs for 90 seconds at a time in 5
Checking again today with
Linux 5.13.0-23-generic #23-Ubuntu SMP Fri Nov 26 11:41:15 UTC 2021
x86_64 x86_64 x86_64 GNU/Linux
plugging both external monitors into hdmi ports on the docking station
has the system see all monitors, however clicking Apply in the Displays
settings only produces no dis
Update: after upgrading to 21.10 (Linux 5.13.0-21-generic #21-Ubuntu SMP
Tue Oct 19 08:59:28 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux) the problem
persists with a twist:
The settings applet now sees all monitors, but trying to configure a
setup with all three is not really feasible since selecting
The last working kernel version was indeed the kind of information the
developers were looking for. Excellent that you were able to supply that
bit of information.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bu
The last working kernel version was indeed the kind of information the
developers were looking for. Excellent that you were able to supply that
bit of information.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bu
I'm also having the same issue. My external screen is blank when using
docking on the 5.11.0-34-generic kernel.
** Attachment added: "2021-08-14_i915_drm_link_training_unsuccessful_error.log"
https://bugs.launchpad.net/ubuntu/+source/linux-signed-hwe-5.11/+bug/1939297/+attachment/5525093/+file
The system now runs 5.11.0-34-generic which still has the bug.
Looking in my /boot the oldest I have is 5.11.0-31-generic which
introduced the bug as far as I can tell (thanks apt autoremove). I do
however update whenever the thing prompts me to so I would venture a
guess that whatever preceded 5.
I would urge you to reconsider the importance of this bug.
This change broke a working setup, with no apparent user-visible
workaround available.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/
Public bug reported:
Machine: Type: Laptop System: Acer product: Aspire A515-44 v: V1.02 serial:
Mobo: RO model: Calla_RN v: V1.02 serial: UEFI: INSYDE v:
1.02
date: 03/23/2020
CPU: Topology: 8-Core model: AMD Ryzen 7 4700U with Radeon Graphics bits:
64 type:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1810416/comments/25
works well for me!
[code]
Okt 11 12:38:25 ubuntu kernel: mmc0: card 59b4 removed
Okt 11 12:38:30 ubuntu kernel: mmc0: cannot verify signal voltage switch
Okt 11 12:38:30 ubuntu kernel: mmc0: new ultra high speed SDR104 SDXC
I'm not aware of any known issue like this.
Is there any USB3 device connected at all?
The only sign of a connected device is that one time CAS bit is set.
device never reaches enables state (no successful link training), no error,
not going to invalid or compliance state either.
Just stays in d
problem still exist after update to 4.15.0-46
latest working kernel for me is 4.15.0-43
hyper-v server 2008r2
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1814069
Title:
kernel linux
*** This bug is a duplicate of bug 1786574 ***
https://bugs.launchpad.net/bugs/1786574
Commenting to help others: I'm on Ubuntu 18.10 on a Lenovo L540 laptop and had
the same problem.
I didn't have i2c_i801 in my blacklist either, but still the touchpad would be
unresponsive after suspend (s
Swapon is not working with swap file or swap partion. Mkswap with Kernel
4.15.0-30-gernic and swapon with Kernel 4.15.0-33-gernic is even not
working.
VMware ESXi 6.0 + Ubuntu 18.04 (32Bit)
- Linux 4.15.0-33-generic (i686)
affected
VMware ESXi 6.0 + Ubuntu 18.04 (32Bit)
- Linux 4.15.0-30-generic
Would it be possible to also enable the enaSupport AWS AMI image
attribute?
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1635721
Title:
Add a driver for Amazon Elastic Network Adapters
I can confirm 4.4.0-64.85 fixes our OOM issues.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1655842
Title:
"Out of memory" errors after upgrade to 4.4.0-59
Status in linux package in
The reboot only helps once. Next attempt to connect will fail. Usually.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1435040
Title:
Ubuntu Phone (BQ E4.5) does not connect to car-bluet
I believe this most likely is a race, when two paired devices try to
reestablish the connection at the same time:
When entering the car, but the HMI and the phone indicate they try connecting
and it usually fails.
Still after some minutes it happens, that only one side tries to initiate the
conn
Could this error about "Not enough free handles to register service" be
relevant?
$ grep ^Nov\ 24\ 16:4.*bluetooth syslog
Nov 24 16:44:15 ubuntu-phablet kernel: [6.701176]init: bluetooth-touch main
process (621) terminated with status 1
Nov 24 16:44:15 ubuntu-phablet bluetoothd[655]: Bluetoo
Ok, installed rc-proposed and situation is worse with MyFord Touch
(Sync2): Neither phone nor head unit see each other. Still device
discovery doesn't seem entirely broken: Can see other people's phones
around, can pair with iPad and Ubuntu laptop. Still after pairing no
interaction is possible. Fi
Confirming for MyFord Touch in Ford Galaxy III.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1435040
Title:
Ubuntu Phone (BQ E4.5) does not connect to car-bluetooth
Status in Canonica
Duplicate of 1435040?
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1501825
Title:
Bq Aquaris e5 HD bluetooth problem
Status in Canonical System Image:
Incomplete
Status in bluez pac
What's exactly holding Ubuntu up from shipping/backporting Debian's
version of Plymouth ? I mean it's already in Jessie.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1359689
Title:
cry
Confirmed for 15.04 (Vivid) on AMD drivers and full encrypted hdd (with LUKS).
If u need a debug log, just ask here.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1359689
Title:
cryptse
Those .debs should already contain a complete kernel with the driver
builtin, no separate modules required.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1372609
Title:
Touchpad detecte
Hm, I probably made a mistake there. Can you instead test the following
packages?
https://drive.google.com/file/d/0Bz7ZZcjnECHLR2EwTVdYd0VWdGc/view?usp=sharing
I've rewritten the fix for your laptop based on comments on the linux-input
mailing list, so I am interested in
1. Does it work at all f
Given my very limited upload speed, that's actually a good idea.
Chris, can you try putting
https://drive.google.com/file/d/0Bz7ZZcjnECHLMHp0V2h1OGtmWXc/view?usp=sharing
into /lib/modules/3.17.0-focaltech-fix/kernel/drivers/input/mouse/ and
reload the psmouse kernel module (or reboot)? That module
No, I think that's not how that byte works - once it is 0xff, it stays
like that until the finger is lifted from the touchpad.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1372609
Title:
Hey, thanks for the information. So, you get that value even without
large contact area? I never managed to get something like that during
normal usage, but maybe other devices have different thresholds. In that
case I'd just drop that part of the code, it is not important enough
that it should sta
Chris: There is no documentation yet. The packets are 6 bytes long, and
I think the lower four bit of the first byte identify the type of the
packet. If you can read some C, then
https://github.com/mgottschlag/linux/blob/focaltech4/drivers/input/mouse/focaltech.c#L229
is the best source available.
I pushed the two patches to my focaltech4 branch:
https://github.com/mgottschlag/linux/tree/focaltech4
@Chris: The issue 1) sounds really hard to debug. One possibility might
be that, like above, you enable i8042 debug output display and have a
life view of dmesg in a window on your screen. If you
Hey, to Chris or anyone else who has the same problem: Can you test the
following kernel and see whether it solves the problem?
https://drive.google.com/file/d/0Bz7ZZcjnECHLeUI5Tnk4VXNoMGM/view?usp=sharing
What it does is it skips some of the initialization code which was
skipped in Hans de Goede
I noticed that the problem was the same as redhat bug 1110011 again
because I managed to break the previous fix for these models, I didn't
get around writing a fix for it yet though. I'll probably have a test
kernel at some point today though.
--
You received this bug notification because you are
Public bug reported:
I Can't run updates anymore. But this fixed my issues why the computer
didn't shut down correctly ha-ha.
ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: bluez 4.101-0ubuntu13 [modified: lib/udev/hid2hci usr/bin/ciptool
usr/bin/hcitool usr/bin/l2ping usr/bin/l2test
Okay, that's what I get here, although of course my system configuration
will be different:
[17.976] (II) config/udev: Adding input device FocalTechPS/2 FocalTech
FocalTech Touchpad (/dev/input/event4)
[17.976] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: Applying
InputClass "evdev t
At someone whose touchpad does not work, with the error "Failed to
enable mouse on isa0060/serio1": Can you boot the following kernel, with
the kernel commandline parameter i8042.debug=1 and send me once more
your dmesg?
https://drive.google.com/file/d/0Bz7ZZcjnECHLc1VMSl9PRnhNdW8/view?usp=sharing
Note though that the fact that the kernel is able to identify the
touchpad does not mean that the driver is enabled.
CONFIG_MOUSE_PS2_FOCALTECH simply switches between the "real driver" and
some legacy code specific to the touchpad. The latter is required
because otherwise the touchpad does not wor
Marcel, have you enabled the touchpad driver in .config? Rerun make
menuconfig and make sure that CONFIG_MOUSE_PS2_FOCALTECH is set. I
cannot think of any other reason yet, as your dmesg does not contain any
error.
I received a bug report though where apparently the touchpad didn't work
together w
@Stephan: Yes, that's totally unrelated, better open a new bug.
@Tom: Just to check that the problem is the same as with the other
models where the touchpad is not working: Can you post a complete dmesg
here?
And to all who have a touchpad where the touchpad does not work and
dmesg shows lines li
Yeah, opening a new bug might be a good idea. Also, I'll try to find
some time next week, then I'll create a patch which generates some more
debugging output, to get some information about the issue.
--
You received this bug notification because you are a member of Kernel
Packages, which is subsc
I have to admit I totally forgit this bug and the patch. The linux-input
maintainers probably forgot the patch as well, and I didn't push the
patch for inclusion yet because I thought there still was a regression
for Owen, and I didn't have the time to debug that. I 100% want to avoid
any regressio
@Owen:
Did the touchpad work before you installed the driver (with reduced features)?
Does the touchpad work if you add i8042.noloop=1 psmouse.proto=bare to the
kernel command line?
Can you post your complete dmesg, and the first couple of lines from ./init
/dev/serio_raw0?
--
You received this
Duplicate of
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1372609 (same
touchpad), try the patches/debs in the comments from that bug.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs
I'll ask the person to test with a different kernel, but so far the
symptoms looked different to the reports here.
Am 10.11.2014 17:15 schrieb "Pilot6" <1372...@bugs.launchpad.net>:
> The suspend problem is a general 3.18 but. It works for everyone else. So
> no need to be so focused on that probl
No, it probably won't. I have not had much time, and on the red hat bug
tracker there is one case where the patch breaks suspend.
I do not know how to proceed or how to debug the issue, maybe adding a
quirk which disables the driver would be an option. I'll see whether I find
some more time next
I don't have much time and before I do any backporting, I want to get
the driver into a state where it will be merged into mainline linux.
There is one problem report where the touchpad is broken after
suspend/resume which needs to be fixed first, that's why I was asking
here in the first place.
h
Which part of suspend/resume is broken? Only the touchpad, or the whole
system? I am on Ubuntu 14.04 and did not have any problems with
suspend/resume so far.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.la
I've uploaded debs of the kernel with the new version of the driver here:
https://drive.google.com/file/d/0Bz7ZZcjnECHLX21ES1JPMnFyNVk/view?usp=sharing
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad
Okay, thanks, can you also send me the first couple of lines printed by
the program? ("status:")
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1388160
Title:
[ASUS X200MA] Touchpad scro
This is basically the same touchpad as in
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1372609.
Can you maybe:
- Run the program in comment #32 of that bug? I am specifically looking for
the maximum and minimum coordinates reported by the touchpad, e.g. in the
output which occurs when y
There is a second version of the driver which improves compatibility with other
Asus laptops here:
https://github.com/mgottschlag/linux/tree/focaltech2
As to the the firmware_id issue, these three patches are relevant:
http://www.spinics.net/lists/linux-input/msg33508.html
I don't think packagin
I've written a multitouch-capable driver which seems to work well at
least on the UX303LN. The code is available under the following URL (in
the focaltech branch):
https://github.com/mgottschlag/linux/tree/focaltech
Before I send anything for review, can people with affected devices
maybe test th
>
> $ sudo ./init /sys/bus/serio/devices/serio1/
> Could not open /sys/bus/serio/devices/serio1/. Check that the program is
> run
> with the required privileges and that the file exists.
> open: Is a directory
>
> What file does the program want as its argument?
>
> On 2
... that went quicker than expected. The link above now contains a
mostly complete parser for the packet stream that (afaics) gives the
correct finger position for up to 5 fingers, as well as information
about touchpad clicks.
--
You received this bug notification because you are a member of Kern
I am in the process of reverse engineering the protocol. I have executed
the Windows 8.1 driver in a VM and have written a short program which
puts the touchpad into the proprietary mode. The code can be found here:
https://github.com/mgottschlag/focaltech-tools
If anybody wants to join me, befor
PID ACCESS COMMAND
/dev/snd/controlC0: mathias1958 F pulseaudio
CurrentDesktop: Unity
Date: Fri Jun 6 12:12:00 2014
HibernationDevice: RESUME=UUID=9bcd1b31-51d6-432f-b3f4-f22775882224
InstallationDate: Installed on 2014-06-04 (1 days ago)
InstallationMedia: Ubuntu 14.04 LTS &quo
13.0-29-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: mathias1958 F pulseaudio
CurrentDesktop: Unity
Date: Fri Jun 6 12:12:00 2014
HibernationDevice: RESUME=UUID=9bcd1b31-51d6-432f-b3
untu 14.04
Package: linux-image-3.13.0-29-generic 3.13.0-29.53
ProcVersionSignature: Ubuntu 3.13.0-29.53-generic 3.13.11.2
Uname: Linux 3.13.0-29-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0
.53
ProcVersionSignature: Ubuntu 3.13.0-29.53-generic 3.13.11.2
Uname: Linux 3.13.0-29-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: mathias1958 F pulseaudio
CurrentDesktop: Unity
Date: Fri Jun 6 12
.53
ProcVersionSignature: Ubuntu 3.13.0-29.53-generic 3.13.11.2
Uname: Linux 3.13.0-29-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: mathias1958 F pulseaudio
CurrentDesktop: Unity
Date: Fri Jun 6
3.13.0-29.53-generic 3.13.11.2
Uname: Linux 3.13.0-29-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: mathias1958 F pulseaudio
CurrentDesktop: Unity
Date: Fri Jun 6 12:12:00 2014
HibernationDevice
/dev/snd/controlC0: mathias 15841 F pulseaudio
CRDA: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden
Card0.Amixer.info:
Card hw:0 'PCH'/'HDA Intel PCH at 0xf090 irq 43'
Mixer name : 'Intel CougarPoint HDMI'
Components : 'HDA:10e
card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: mathias 15841 F pulseaudio
CRDA: Error: [Errno 2] Datei oder Verzeichnis
If you have these problems running Dota 2, you should try Mesa Git or wait for
Mesa 10. It contains several patches to remove lockups.
For me on Dota 2 the lockups are completely gone, probably they're also gone in
other applications.
--
You received this bug notification because you are a mem
The problem also appears with kernel 3.8.0-33-generic on my laptop (see
my other comments above). I am now 100% positive this is linked to the
wifi (ipw2200 card). I loose all network connectivity, thunderbird gets
crazy (high cpu usage) and I see one or two kworker processes. Turning
wifi off does
This bug is back (on the exact same computer) with kernel
3.10.1-031001-generic. Again, a reboot solves the problem... Otherwise,
with kernel 3.8.0-33-generic everything works fine. And this might be
linked to bug #887793 on this machine.
--
You received this bug notification because you are a me
Same bug, starting today with the updated 3.10.1-031001-generic kernel
on Ubuntu 13.04. I suspect my ipw2200 wifi to be the source of the
problem (the driver seems to be slowly falling behind, it is getting
quite unstable, I often have to turn the wifi off and back on in order
to get back connectiv
@popey:
I tested kernel 3.12.0-031200rc7-generic with Mesa 9.2.2 and xf86-video-
intel-2.99.905 running Dota 2 which, is a useful test case to produce
hangs and I can assure that there are still plenty lockups. Only the
output differs now:
[ 2937.818867] [drm:i915_set_reset_status] *ERROR* render
@thomas303: Since 12.04.3 uses the video stack and kernel of Raring it's no
wonder that it's also affected.
If you didn't have the errors before 12.04.3 you can still revert to the video
stack / kernel of 12.04.2 (Quantal) or 12.04 (Precise).
--
You received this bug notification because you a
Correct me if I am wrong, but if it's an Intel DRI bug (and thats what
it is), wouldn't it mean that "xserver-xorg-video-intel" is the "real
affected" package ?
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.
(In reply to comment #113)
> On snb the blorp engine in mesa has become a bit more hang-happy, see bug
> #70151
> Not all gpu hangs are created equal ;-)
>
Actually it was on Sandybridge.
> You mean a gpu hang happens while when doing a vt switch?
No I meant, if you suffer a lockup you just hav
Just a few remarks.
I still see this bug with Kernel 3.8, Mesa 9.2.1 and DRI 2.99.904.
Moreover, with switching from Mesa 9.1.x to Mesa 9.2.x the number of lockups
highly increased (especially in games).
Additionally with running the latest drivers complete system lockups are gone,
but it's still
(In reply to comment #113)
> On snb the blorp engine in mesa has become a bit more hang-happy, see bug
> #70151
> Not all gpu hangs are created equal ;-)
>
Actually it was on Sandybridge.
> You mean a gpu hang happens while when doing a vt switch?
No I meant, if you suffer a lockup you just hav
Just a few remarks.
I still see this bug with Kernel 3.8, Mesa 9.2.1 and DRI 2.99.904.
Moreover, with switching from Mesa 9.1.x to Mesa 9.2.x the number of lockups
highly increased (especially in games).
Additionally with running the latest drivers complete system lockups are gone,
but it's still
FYI, this also affects Saucy with 3.8.0-30-generic and Mesa 9.2.1 and Intel DRI
2.99.904.
Also I observed that with switching to Mesa 9.2 the number of lockups highly
increased.
Additionally with newer drivers installed, there are now complete system
lockups anymore.
Just the VT switching, whic
rsion: 1.23-0ubuntu4
Architecture: amd64
ArecordDevices:
List of CAPTURE Hardware Devices
card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/control
], device 0: ALC269VB Analog [ALC269VB Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: mathias 15841 F pulseaudio
CRDA: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden
Card0.Amixer.info
C269VB Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: mathias 15841 F pulseaudio
CRDA: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden
Card0.Amixer.info:
Card hw:0 'PCH'/'H
On Ubuntu 13.04, my intel iw2200 resumes perfectly fine. The network
works after coming out of hibernate. I'll now test with a daily image.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/10
st of CAPTURE Hardware Devices
card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: mathias 15841 F pulseaudio
CRDA: Error: [Errno 2
Instead of commenting "I can confirm xyz", please use the "Affects me
too"-button above.
Please checkout upstreams bug report [1]. Intel is working in the issue.
See if you can help, when there is help needed (e.g. patch testing or
debugging).
[1] https://bugs.freedesktop.org/show_bug.cgi?id=5
B Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: mathias 15841 F pulseaudio
CRDA: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden
Card0.Amixer.info:
Card hw:0 'PCH'/'HDA In
ardware Devices
card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: mathias 15841 F pulseaudio
CRDA: Error: [Errno 2] Datei
vice 0: ALC269VB Analog [ALC269VB Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: mathias 15841 F pulseaudio
CRDA: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden
Card0.Amixer.info:
Card
ardware Devices
card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: mathias 15841 F pulseaudio
CRDA: Error: [Errno 2] Datei
#0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: mathias 15841 F pulseaudio
CRDA: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden
Card0.Amixer.info:
Card hw:0 'PCH'/'HDA Intel PCH at 0xf090 irq 43'
Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: mathias 15841 F pulseaudio
CRDA: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden
Card0.Amixer
C269VB Analog [ALC269VB Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: mathias 15841 F pulseaudio
CRDA: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden
Card0.Amixer.info:
Card hw:0 'PC
95 matches
Mail list logo
