** Changed in: linux-raspi (Ubuntu Impish) Status: Confirmed => Fix Released
-- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-raspi in Ubuntu. https://bugs.launchpad.net/bugs/1930365 Title: impish/linux-raspi: Upstream raspberrypi patchset 2021-05-28 Status in linux-raspi package in Ubuntu: Fix Released Status in linux-raspi source package in Impish: Fix Released Bug description: Upstream raspberrypi patchset 2021-05-28 Ported from the following raspberrypi branch: rpi-5.12.y from https://github.com/raspberrypi/linux.git overlays: Add rpi-poe-plus overlay configs: Enable Raspberry Pi PoE+ HAT support Add Raspberry Pi PoE+ HAT support configs: add bh1750 and ccs811 to configs (#4334) overlays: add bh1750 and ccs811 to i2c-sensor (#4334) configs: Add GPIO_PCA953X_IRQ=y overlays: Remove deleted merus-amp parameter configs: Add CONFIG_SENSIRION_SGP30=m overlays: add sensirion sgp30 to i2c-sensor overlay Add CAN_J1939 as module to default build configs (#4346) media: rpivid: Improve SPS/PPS error handling/validation media: rpivid: Improve stream_on/off conformance & clock setup media: rpivid: Improve values returned when setting output format media: rpivid: Map cmd buffer directly Revert "media: v4l2-mem2mem: allow request job buffer processing after job finish" media: rpivid: Add a Pass0 to accumulate slices and rework job finish RFC: media: Add media_request_{pin,unpin} API media: rpivid: Add an enable count to irq claim Qs media: rpivid: Convert to MPLANE media: rpivid: Remove the need to have num_entry_points set dtoverlays: Update /__symbols__/i2c0 from i2c0 overlay dtoverlays: Add pinctrl-names to i2c0 overlay. media: i2c: ov5647: Fix v4l2-compliance failure subscribing to events media: i2c: ov5647: Correct minimum VBLANK value media: i2c: ov5647: Correct pixel array offset configs: Add NF_LOG_ARP=m and NF_LOG_NETDEV=m overlays: merus-amp: remove spi override vc4/drm: hdmi: Fix missing declaration drm/vc4: hdmi: Add a workqueue to set scrambling drm/vc4: hdmi: Rely on interrupts to handle hotplug drm/vc4: hdmi: Simplify the connector state retrieval drm/vc4: hdmi: Make sure the controller is powered in detect drm/vc4: hdmi: Switch to pm_runtime_resume_and_get drm/vc4: crtc: Lookup the encoder from the register at boot drm/vc4: crtc: Fix vc4_get_crtc_encoder logic drm/vc4: crtc: Pass the drm_atomic_state to config_pv Revert "drm/vc4: Rework the encoder retrieval code" clk: Always clamp the rounded rate configs: add CONFIG_QCA7000_UART=m (#4322) configs: Regenerate defconfigs spi: bcm2835: Increase the CS limit to 24 ARM: dts: bcm2711-rpi-400: Limit MDIO clock speed drm/vc4: Allow DBLCLK modes even if horz timing is odd. gpio-poweroff: Remember the old poweroff handler overlays: Add ugreen-dabboard overlay overlays: README - improve the gpio-poweroff guide overlays: Allow multiple gpio-shutdown instances staging/bcm2835-isp: Fix compiler warning staging/bcm2835-codec: Do not update crop from S_FMT after res change staging/bcm2835-camera: Add support for H264 levels 4.1 and 4.2 staging/bcm2835-codec: Pass corrupt frame flag. staging/bcm2835-codec: Set the colourspace appropriately for RGB formats staging/bcm2835-codec: Fix support for levels 4.1 and 4.2 clk: requests: Dereference the request pointer after the check configs: Enable ATA and AHCI for SATA drive support. drm/vc4: Separate VEC compatible variants drm/vc4: Fix clock source for VEC PixelValve on BCM2711 drm/vc4: Fix VEC address for BCM2711 in the devicetrees overlays: spi-rtc: Add ds3232 and ds3234 vc4/drm: hdmi: Handle case when bvb clock is null drm/vc4: hdmi: Raise the maximum clock rate drm/vc4: hdmi: Enable the scrambler drm/vc4: hdmi: Check and warn if we can't reach 4kp60 frequencies drm/vc4: hdmi: Properly compute the BVB clock rate drm/vc4: hvs: Make the HVS bind first drm/vc4: hdmi: Prevent clock unbalance drm/vc4: Rework the encoder retrieval code drm/vc4: crtc: Skip the TXP drm/vc4: txp: Properly set the possible_crtcs mask clk: requests: Ignore if the pointer is null dtoverlays: Add overlays for JDI LT070ME05000 1200x1920 DSI panel defconfigs: Add PANEL_JDI_LT070ME05000 DSI panel drm/panel: jdi-lt070me05000: Use gpiod_set_value_cansleep drm/atomic: Don't fixup modes that haven't been reset drm/vc4: Add correct stop condition to vc4_dsi_encoder_disable iteration drm/vc4: Fix dsi0 interrupt support. drm/vc4: Register dsi0 as the correct vc4 encoder type drm/vc4: Correct pixel order for DSI0 dwc_otg: fix an undeclared variable rpivid: Only clk_request_done once rpivid: Switch to new clock api bcm2835-unicam: Switch to new clock api drm/vc4: hdmi: Convert to the new clock request API drm/vc4: hdmi: Convert to the new clock request API clk: Introduce a clock request API overlays: ghost-amp: Add DAC mute control sound/usb: call usb_autopm_get_interface() for devices that should not sound/usb: add device quirks for A4Tech FHD 1080p webcams vc4/kms: vc4_plane: Support 2020 colourspace for yuv planes staging: vcsm-cma: Fix memory leak from not detaching dmabuf drm/vc4: hdmi: Signal the proper colorimetry info in the infoframe drm/connector: Add a helper to attach the colorspace property drm/vc4: Use the new helpers drm/connector: Add helper to compare HDR metadata drm/connector: Create a helper to attach the hdr_output_metadata property To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1930365/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp