[Kernel-packages] [Bug 1228496] [NEW] [Dell Inc. Inspiron 1764] suspend/resume failure
Public bug reported: was using laptop on battery power, closed the lid, when i opened it again it didn't resume but booted up from scratch. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-7-generic 3.11.0-7.14 ProcVersionSignature: Ubuntu 3.11.0-7.14-generic 3.11.1 Uname: Linux 3.11.0-7-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.2-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: dantheperson 1610 F pulseaudio Date: Sat Sep 21 17:54:07 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=0bf99560-3485-47f0-9740-735852abf49d InstallationDate: Installed on 2013-09-12 (8 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130911) InterpreterPath: /usr/bin/python3.3 Lsusb: Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0c45:641d Microdia 1.3 MPixel Integrated Webcam Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 1764 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-7-generic root=UUID=58853734-f54b-4d6e-93b1-6574ccf745ae ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.11.0-7-generic N/A linux-backports-modules-3.11.0-7-generic N/A linux-firmware1.114 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux Title: [Dell Inc. Inspiron 1764] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: WifiSyslog: Sep 21 18:27:31 danski NetworkManager[1089]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Sep 21 18:35:31 danski NetworkManager[1089]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Sep 21 18:35:31 danski NetworkManager[1089]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted dmi.bios.date: 03/29/2011 dmi.bios.vendor: Dell Inc. dmi.bios.version: A13 dmi.board.name: 0TKV96 dmi.board.vendor: Dell Inc. dmi.board.version: A13 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: A13 dmi.modalias: dmi:bvnDellInc.:bvrA13:bd03/29/2011:svnDellInc.:pnInspiron1764:pvrA13:rvnDellInc.:rn0TKV96:rvrA13:cvnDellInc.:ct8:cvrA13: dmi.product.name: Inspiron 1764 dmi.product.version: A13 dmi.sys.vendor: Dell Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-kerneloops resume saucy suspend -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1228496 Title: [Dell Inc. Inspiron 1764] suspend/resume failure Status in “linux” package in Ubuntu: New Bug description: was using laptop on battery power, closed the lid, when i opened it again it didn't resume but booted up from scratch. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-7-generic 3.11.0-7.14 ProcVersionSignature: Ubuntu 3.11.0-7.14-generic 3.11.1 Uname: Linux 3.11.0-7-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.2-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: dantheperson 1610 F pulseaudio Date: Sat Sep 21 17:54:07 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=0bf99560-3485-47f0-9740-735852abf49d InstallationDate: Installed on 2013-09-12 (8 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130911) InterpreterPath: /usr/bin/python3.3 Lsusb: Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0c45:641d Microdia 1.3 MPixel Integrated Webcam Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 1764 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-7-generic root=UUID=58853734-f54b-4d6e-93b1-6574ccf745ae ro quiet splash vt.hand
[Kernel-packages] [Bug 1228495] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1228495 Title: [ASUSTeK COMPUTER INC. K55VM] suspend/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: Mouse started flickering after reboot and continued to flicker. ProblemType: KernelOops DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-4-generic 3.8.0-4.8 ProcVersionSignature: Ubuntu 3.8.0-4.8-generic 3.8.0-rc6 Uname: Linux 3.8.0-4-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.8-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: sankalp3684 F pulseaudio /dev/snd/pcmC0D0p: sankalp3684 F...m pulseaudio Date: Mon Sep 16 22:53:46 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=7a890c5d-1515-462b-95dc-5d2140b0c509 InstallationDate: Installed on 2013-03-07 (197 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5) InterpreterPath: /usr/bin/python3.3 MachineType: ASUSTeK COMPUTER INC. K55VM MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-4-generic root=UUID=7095bd25-6b9e-4a72-abc0-3692cbed727c ro recovery nomodeset PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.8.0-4-generic N/A linux-backports-modules-3.8.0-4-generic N/A linux-firmware 1.100 SourcePackage: linux Title: [ASUSTeK COMPUTER INC. K55VM] suspend/resume failure UpgradeStatus: Upgraded to raring on 2013-04-26 (147 days ago) UserGroups: dmi.bios.date: 03/13/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: K55VM.202 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: K55VM dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrK55VM.202:bd03/13/2012:svnASUSTeKCOMPUTERINC.:pnK55VM:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnK55VM:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: K55VM dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1228495/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1228495] [NEW] [ASUSTeK COMPUTER INC. K55VM] suspend/resume failure
Public bug reported: Mouse started flickering after reboot and continued to flicker. ProblemType: KernelOops DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-4-generic 3.8.0-4.8 ProcVersionSignature: Ubuntu 3.8.0-4.8-generic 3.8.0-rc6 Uname: Linux 3.8.0-4-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.8-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: sankalp3684 F pulseaudio /dev/snd/pcmC0D0p: sankalp3684 F...m pulseaudio Date: Mon Sep 16 22:53:46 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=7a890c5d-1515-462b-95dc-5d2140b0c509 InstallationDate: Installed on 2013-03-07 (197 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5) InterpreterPath: /usr/bin/python3.3 MachineType: ASUSTeK COMPUTER INC. K55VM MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-4-generic root=UUID=7095bd25-6b9e-4a72-abc0-3692cbed727c ro recovery nomodeset PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.8.0-4-generic N/A linux-backports-modules-3.8.0-4-generic N/A linux-firmware 1.100 SourcePackage: linux Title: [ASUSTeK COMPUTER INC. K55VM] suspend/resume failure UpgradeStatus: Upgraded to raring on 2013-04-26 (147 days ago) UserGroups: dmi.bios.date: 03/13/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: K55VM.202 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: K55VM dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrK55VM.202:bd03/13/2012:svnASUSTeKCOMPUTERINC.:pnK55VM:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnK55VM:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: K55VM dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-kerneloops raring resume suspend -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1228495 Title: [ASUSTeK COMPUTER INC. K55VM] suspend/resume failure Status in “linux” package in Ubuntu: New Bug description: Mouse started flickering after reboot and continued to flicker. ProblemType: KernelOops DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-4-generic 3.8.0-4.8 ProcVersionSignature: Ubuntu 3.8.0-4.8-generic 3.8.0-rc6 Uname: Linux 3.8.0-4-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.8-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: sankalp3684 F pulseaudio /dev/snd/pcmC0D0p: sankalp3684 F...m pulseaudio Date: Mon Sep 16 22:53:46 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=7a890c5d-1515-462b-95dc-5d2140b0c509 InstallationDate: Installed on 2013-03-07 (197 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5) InterpreterPath: /usr/bin/python3.3 MachineType: ASUSTeK COMPUTER INC. K55VM MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-4-generic root=UUID=7095bd25-6b9e-4a72-abc0-3692cbed727c ro recovery nomodeset PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.8.0-4-generic N/A linux-backports-modules-3.8.0-4-generic N/A linux-firmware 1.100 SourcePackage: linux Title: [ASUSTeK COMPUTER INC. K55VM] suspend/resume failure UpgradeStatus: Upgraded to raring on 2013-04-26 (147 days ago) UserGroups: dmi.bios.date: 03/13/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: K55VM.202 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: K55VM dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrK55VM.202:bd03/13/2012:svnASUSTeKCOMPUTERINC.:pnK55VM:pvr1.0:rvnASUSTe
[Kernel-packages] [Bug 1215813] Re: [Microsoft Corporation Surface with Windows 8 Pro] suspend/resume failure
** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1215813 Title: [Microsoft Corporation Surface with Windows 8 Pro] suspend/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: Unable to wake up from sleep. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-3-generic 3.11.0-3.7~lp1212720v1 ProcVersionSignature: Ubuntu 3.11.0-3.7-generic 3.11.0-rc6 Uname: Linux 3.11.0-3-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: thariman 1603 F pulseaudio Date: Fri Aug 23 15:32:03 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=e26dcbb3-d727-4eeb-baca-d2c60e5a4eb3 InstallationDate: Installed on 2013-08-23 (0 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130822) InterpreterPath: /usr/bin/python3.3 MachineType: Microsoft Corporation Surface with Windows 8 Pro MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-3-generic.efi.signed root=UUID=66cd76a3-0f05-45ea-94bd-83958f7aae13 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.11.0-3-generic N/A linux-backports-modules-3.11.0-3-generic N/A linux-firmware1.113 SourcePackage: linux Title: [Microsoft Corporation Surface with Windows 8 Pro] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 07/04/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.04.0350 dmi.board.asset.tag: 0 dmi.board.name: Surface with Windows 8 Pro dmi.board.vendor: Microsoft Corporation dmi.board.version: 1 dmi.chassis.asset.tag: 0 dmi.chassis.type: 17 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 1 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.04.0350:bd07/04/2013:svnMicrosoftCorporation:pnSurfacewithWindows8Pro:pvr1:rvnMicrosoftCorporation:rnSurfacewithWindows8Pro:rvr1:cvnMicrosoftCorporation:ct17:cvr1: dmi.product.name: Surface with Windows 8 Pro dmi.product.version: 1 dmi.sys.vendor: Microsoft Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1215813/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1228488] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1228488 Title: [Microsoft Corporation Surface with Windows 8 Pro] hibernate/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: Please refer to bug 1215922 this is the dump after doing test for that bug. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-7-generic 3.11.0-7.14 ProcVersionSignature: Ubuntu 3.11.0-7.14-generic 3.11.1 Uname: Linux 3.11.0-7-generic x86_64 Annotation: This occured during a previous hibernate and prevented it from resuming properly. ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: thariman 1670 F pulseaudio Date: Sat Sep 21 11:22:50 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: hibernate/resume HibernationDevice: RESUME=UUID=58fe7ee3-9d91-462f-99b4-c60406d124c9 InstallationDate: Installed on 2013-08-27 (24 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130827) InterpreterPath: /usr/bin/python3.3 MachineType: Microsoft Corporation Surface with Windows 8 Pro MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-7-generic.efi.signed root=UUID=0e136ed3-b677-4627-9174-e1188cc73166 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.11.0-7-generic N/A linux-backports-modules-3.11.0-7-generic N/A linux-firmware1.114 SourcePackage: linux Title: [Microsoft Corporation Surface with Windows 8 Pro] hibernate/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 07/04/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.04.0350 dmi.board.asset.tag: 0 dmi.board.name: Surface with Windows 8 Pro dmi.board.vendor: Microsoft Corporation dmi.board.version: 1 dmi.chassis.asset.tag: 0 dmi.chassis.type: 17 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 1 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.04.0350:bd07/04/2013:svnMicrosoftCorporation:pnSurfacewithWindows8Pro:pvr1:rvnMicrosoftCorporation:rnSurfacewithWindows8Pro:rvr1:cvnMicrosoftCorporation:ct17:cvr1: dmi.product.name: Surface with Windows 8 Pro dmi.product.version: 1 dmi.sys.vendor: Microsoft Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1228488/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1215922] Re: [Microsoft Corporation Surface with Windows 8 Pro] hibernate/resume failure
after doing the sudo pm-hibernate need to do power off it created a crash dump Bug # 1228488 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1215922 Title: [Microsoft Corporation Surface with Windows 8 Pro] hibernate/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: Unable to hibernate test using sudo pm-hibernate. Stuck screen off but still not off. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-3-generic 3.11.0-3.7~lp1212720v1 ProcVersionSignature: Ubuntu 3.11.0-3.7-generic 3.11.0-rc6 Uname: Linux 3.11.0-3-generic x86_64 Annotation: This occured during a previous hibernate and prevented it from resuming properly. ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: thariman 1752 F pulseaudio Date: Fri Aug 23 20:10:03 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: hibernate/resume HibernationDevice: RESUME=UUID=58fe7ee3-9d91-462f-99b4-c60406d124c9 InstallationDate: Installed on 2013-08-23 (0 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130822) InterpreterPath: /usr/bin/python3.3 MachineType: Microsoft Corporation Surface with Windows 8 Pro MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-3-generic.efi.signed root=UUID=76f78d09-0b4c-40cd-a12f-a36e4817e051 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.11.0-3-generic N/A linux-backports-modules-3.11.0-3-generic N/A linux-firmware1.113 SourcePackage: linux Title: [Microsoft Corporation Surface with Windows 8 Pro] hibernate/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 07/04/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.04.0350 dmi.board.asset.tag: 0 dmi.board.name: Surface with Windows 8 Pro dmi.board.vendor: Microsoft Corporation dmi.board.version: 1 dmi.chassis.asset.tag: 0 dmi.chassis.type: 17 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 1 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.04.0350:bd07/04/2013:svnMicrosoftCorporation:pnSurfacewithWindows8Pro:pvr1:rvnMicrosoftCorporation:rnSurfacewithWindows8Pro:rvr1:cvnMicrosoftCorporation:ct17:cvr1: dmi.product.name: Surface with Windows 8 Pro dmi.product.version: 1 dmi.sys.vendor: Microsoft Corporation --- ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: thariman 1786 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=58fe7ee3-9d91-462f-99b4-c60406d124c9 InstallationDate: Installed on 2013-08-24 (2 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130822) MachineType: Microsoft Corporation Surface with Windows 8 Pro MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic root=UUID=37b9d484-211b-47ca-b9e7-fd1903f1e30a ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-4-generic N/A linux-backports-modules-3.11.0-4-generic N/A linux-firmware1.113 Tags: saucy Uname: Linux 3.11.0-4-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 07/04/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.04.0350 dmi.board.asset.tag: 0 dmi.board.name: Surface with Windows 8 Pro dmi.board.vendor: Microsoft Corporation dmi.board.version: 1 dmi.chassis.asset.tag: 0 dmi.chassis.type: 17 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 1 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.04.0350:bd07/04/2013:svnMicrosoftCorporation:pnSurfacewithWindows8Pro:pvr1:rvnMicrosoftCorporation:rnSurfacewithWindows8Pro:rvr1:cvnMicrosoftCorporation:ct17:cvr1: dmi.product.name: Surface with Windows 8 Pro dmi.product.version: 1 dmi.sys.vendor: Microsoft Corporation --- ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: thariman 1787 F pulseaudio DistroRe
[Kernel-packages] [Bug 1228488] [NEW] [Microsoft Corporation Surface with Windows 8 Pro] hibernate/resume failure
Public bug reported: Please refer to bug 1215922 this is the dump after doing test for that bug. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-7-generic 3.11.0-7.14 ProcVersionSignature: Ubuntu 3.11.0-7.14-generic 3.11.1 Uname: Linux 3.11.0-7-generic x86_64 Annotation: This occured during a previous hibernate and prevented it from resuming properly. ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: thariman 1670 F pulseaudio Date: Sat Sep 21 11:22:50 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: hibernate/resume HibernationDevice: RESUME=UUID=58fe7ee3-9d91-462f-99b4-c60406d124c9 InstallationDate: Installed on 2013-08-27 (24 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130827) InterpreterPath: /usr/bin/python3.3 MachineType: Microsoft Corporation Surface with Windows 8 Pro MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-7-generic.efi.signed root=UUID=0e136ed3-b677-4627-9174-e1188cc73166 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.11.0-7-generic N/A linux-backports-modules-3.11.0-7-generic N/A linux-firmware1.114 SourcePackage: linux Title: [Microsoft Corporation Surface with Windows 8 Pro] hibernate/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 07/04/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.04.0350 dmi.board.asset.tag: 0 dmi.board.name: Surface with Windows 8 Pro dmi.board.vendor: Microsoft Corporation dmi.board.version: 1 dmi.chassis.asset.tag: 0 dmi.chassis.type: 17 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 1 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.04.0350:bd07/04/2013:svnMicrosoftCorporation:pnSurfacewithWindows8Pro:pvr1:rvnMicrosoftCorporation:rnSurfacewithWindows8Pro:rvr1:cvnMicrosoftCorporation:ct17:cvr1: dmi.product.name: Surface with Windows 8 Pro dmi.product.version: 1 dmi.sys.vendor: Microsoft Corporation ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-kerneloops hibernate resume saucy -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1228488 Title: [Microsoft Corporation Surface with Windows 8 Pro] hibernate/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: Please refer to bug 1215922 this is the dump after doing test for that bug. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-7-generic 3.11.0-7.14 ProcVersionSignature: Ubuntu 3.11.0-7.14-generic 3.11.1 Uname: Linux 3.11.0-7-generic x86_64 Annotation: This occured during a previous hibernate and prevented it from resuming properly. ApportVersion: 2.12.4-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: thariman 1670 F pulseaudio Date: Sat Sep 21 11:22:50 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: hibernate/resume HibernationDevice: RESUME=UUID=58fe7ee3-9d91-462f-99b4-c60406d124c9 InstallationDate: Installed on 2013-08-27 (24 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130827) InterpreterPath: /usr/bin/python3.3 MachineType: Microsoft Corporation Surface with Windows 8 Pro MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-7-generic.efi.signed root=UUID=0e136ed3-b677-4627-9174-e1188cc73166 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.11.0-7-generic N/A linux-backports-modules-3.11.0-7-generic N/A linux-firmware1.114 SourcePackage: linux Title: [Microsoft Corporation Surface with Windows 8 Pro] hibernate/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 07/04/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.04.0350 dmi.board.asset.tag: 0 dmi.board.name: Surface with Windows 8 Pro dmi.board.vendor: Microsoft Corporation dmi.board.version: 1 dmi.chassis.asset.tag: 0 dmi.chassis.type: 17 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 1 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.04.0350:bd07/04/2013:s
[Kernel-packages] [Bug 1215922] Re: [Microsoft Corporation Surface with Windows 8 Pro] hibernate/resume failure
** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1215922 Title: [Microsoft Corporation Surface with Windows 8 Pro] hibernate/resume failure Status in “linux” package in Ubuntu: Confirmed Bug description: Unable to hibernate test using sudo pm-hibernate. Stuck screen off but still not off. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-3-generic 3.11.0-3.7~lp1212720v1 ProcVersionSignature: Ubuntu 3.11.0-3.7-generic 3.11.0-rc6 Uname: Linux 3.11.0-3-generic x86_64 Annotation: This occured during a previous hibernate and prevented it from resuming properly. ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: thariman 1752 F pulseaudio Date: Fri Aug 23 20:10:03 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: hibernate/resume HibernationDevice: RESUME=UUID=58fe7ee3-9d91-462f-99b4-c60406d124c9 InstallationDate: Installed on 2013-08-23 (0 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130822) InterpreterPath: /usr/bin/python3.3 MachineType: Microsoft Corporation Surface with Windows 8 Pro MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-3-generic.efi.signed root=UUID=76f78d09-0b4c-40cd-a12f-a36e4817e051 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.11.0-3-generic N/A linux-backports-modules-3.11.0-3-generic N/A linux-firmware1.113 SourcePackage: linux Title: [Microsoft Corporation Surface with Windows 8 Pro] hibernate/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 07/04/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.04.0350 dmi.board.asset.tag: 0 dmi.board.name: Surface with Windows 8 Pro dmi.board.vendor: Microsoft Corporation dmi.board.version: 1 dmi.chassis.asset.tag: 0 dmi.chassis.type: 17 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 1 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.04.0350:bd07/04/2013:svnMicrosoftCorporation:pnSurfacewithWindows8Pro:pvr1:rvnMicrosoftCorporation:rnSurfacewithWindows8Pro:rvr1:cvnMicrosoftCorporation:ct17:cvr1: dmi.product.name: Surface with Windows 8 Pro dmi.product.version: 1 dmi.sys.vendor: Microsoft Corporation --- ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: thariman 1786 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=58fe7ee3-9d91-462f-99b4-c60406d124c9 InstallationDate: Installed on 2013-08-24 (2 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130822) MachineType: Microsoft Corporation Surface with Windows 8 Pro MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic root=UUID=37b9d484-211b-47ca-b9e7-fd1903f1e30a ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-4-generic N/A linux-backports-modules-3.11.0-4-generic N/A linux-firmware1.113 Tags: saucy Uname: Linux 3.11.0-4-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 07/04/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.04.0350 dmi.board.asset.tag: 0 dmi.board.name: Surface with Windows 8 Pro dmi.board.vendor: Microsoft Corporation dmi.board.version: 1 dmi.chassis.asset.tag: 0 dmi.chassis.type: 17 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 1 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.04.0350:bd07/04/2013:svnMicrosoftCorporation:pnSurfacewithWindows8Pro:pvr1:rvnMicrosoftCorporation:rnSurfacewithWindows8Pro:rvr1:cvnMicrosoftCorporation:ct17:cvr1: dmi.product.name: Surface with Windows 8 Pro dmi.product.version: 1 dmi.sys.vendor: Microsoft Corporation --- ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: thariman 1787 F pulseaudio DistroRelease: Ubuntu 13.10 Hi
[Kernel-packages] [Bug 1173526] Re: Since upgrading to jubuntu 13.04 computer won't sleep / crashes when sleeping
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1173526 Title: Since upgrading to jubuntu 13.04 computer won't sleep / crashes when sleeping Status in “linux” package in Ubuntu: Expired Bug description: Since upgrading to kubuntu 13.04 my computer won't sleep properly: Under 12.10 it behaved perfectly, now: It sometimes sleeps when instructed It sometimes shuts down When woken: I get one of the following: straight reboot tries to wake up and then freezes tries to wake up and Ooops then freezes (since it is frozen I have no diagnostics apart from some console noise) tires to wake up, complains about disks, Ooops and then freezes Kubuntu is set to sleep on the power button and has never once managed it successfully since the upgrade - --- ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: matt 1972 F pulseaudio /dev/snd/controlC0: matt 1972 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=3e38e64f-3247-4c02-bdf8-ccef21042b4f InstallationDate: Installed on 2013-02-25 (60 days ago) InstallationMedia: Kubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.1) IwConfig: eth0 no wireless extensions. lono wireless extensions. MarkForUpload: True NonfreeKernelModules: nvidia Package: linux (not installed) ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=e96206f3-21ae-4c94-82a0-d381fabaf5da ro quiet splash ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 RfKill: Tags: raring Uname: Linux 3.8.0-19-generic x86_64 UpgradeStatus: Upgraded to raring on 2013-04-26 (1 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 07/24/2007 dmi.bios.vendor: Intel Corp. dmi.bios.version: MQ96510J.86A.1698.2007.0724.0037 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: DG965SS dmi.board.vendor: Intel Corporation dmi.board.version: AAD41678-308 dmi.chassis.type: 3 dmi.modalias: dmi:bvnIntelCorp.:bvrMQ96510J.86A.1698.2007.0724.0037:bd07/24/2007:svn:pn:pvr:rvnIntelCorporation:rnDG965SS:rvrAAD41678-308:cvn:ct3:cvr: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173526/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1197703] Re: aoe kernel module BUG if the value is greater than 15 in aoe slot
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197703 Title: aoe kernel module BUG if the value is greater than 15 in aoe slot Status in “linux” package in Ubuntu: Expired Bug description: in /dev/ehterd/eX.Y if Y is greater than 15, kernel module cannot be unloaded and AoE service hangs. [ 1917.724163] BUG: unable to handle kernel NULL pointer dereference at 03f0 [ 1917.724412] IP: [] blk_cleanup_queue+0x1d/0x100 [ 1917.724565] PGD 3ba07067 PUD 3c9df067 PMD 0 [ 1917.724681] Oops: [#1] SMP [ 1917.724790] CPU 0 [ 1917.724884] Modules linked in: aoe(-) psmouse microcode snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore serio_raw virtio_balloon snd_page_alloc mac_hid i2c_piix4 lp parport floppy [ 1917.725329] [ 1917.725407] Pid: 1002, comm: modprobe Not tainted 3.5.0-34-generic #55~precise1-Ubuntu Bochs Bochs [ 1917.725638] RIP: 0010:[] [] blk_cleanup_queue+0x1d/0x100 [ 1917.725782] RSP: 0018:88003a1a7e28 EFLAGS: 00010286 [ 1917.725906] RAX: 88003d22b601 RBX: 88003c71a200 RCX: 6b4d [ 1917.726038] RDX: 6b4c RSI: 88003d22b6c0 RDI: [ 1917.726174] RBP: 88003a1a7e48 R08: 00016710 R09: eaf48ac0 [ 1917.726301] R10: a00ca3cb R11: R12: 88003c71a2e0 [ 1917.726438] R13: 88003c71a2e0 R14: R15: 88003c71a320 [ 1917.726579] FS: 7fabcfc34700() GS:88003fc0() knlGS: [ 1917.726712] CS: 0010 DS: ES: CR0: 8005003b [ 1917.726830] CR2: 03f0 CR3: 3b9e9000 CR4: 06f0 [ 1917.726975] DR0: DR1: DR2: [ 1917.727131] DR3: DR6: 0ff0 DR7: 0400 [ 1917.727271] Process modprobe (pid: 1002, threadinfo 88003a1a6000, task 88003a0bdc00) [ 1917.727413] Stack: [ 1917.727502] 88003c71a200 88003c71a2e0 88003c71a2e0 [ 1917.727652] 88003a1a7e98 a00ca43d 88003c71a2c0 88003c71a358 [ 1917.727801] 0143b080 88003c71a200 88003c71a2c0 0286 [ 1917.727938] Call Trace: [ 1917.728023] [] aoedev_freedev+0x12d/0x150 [aoe] [ 1917.728023] [] aoedev_exit+0x65/0x80 [aoe] [ 1917.728023] [] aoe_exit+0x33/0x40 [aoe] [ 1917.728023] [] sys_delete_module+0x18c/0x250 [ 1917.728023] [] ? do_async_page_fault+0x35/0x90 [ 1917.728023] [] system_call_fastpath+0x16/0x1b [ 1917.728023] Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 5d e0 4c 89 65 e8 4c 89 6d f0 4c 89 75 f8 0f 1f 44 00 00 <4c> 8b a7 f0 03 00 00 4c 8d af 28 07 00 00 48 89 fb 4c 89 ef e8 [ 1917.728023] RIP [] blk_cleanup_queue+0x1d/0x100 [ 1917.728023] RSP [ 1917.728023] CR2: 03f0 [ 1917.741115] ---[ end trace a1e794390b46d1ca ]--- please update aoe driver --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.25. AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.0.1-0ubuntu17.3 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Error: [Errno 2] No such file or directory Card0.Amixer.values: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=e12b7ab7-218e-4c2d-8d48-fd669c7d11f3 InstallationMedia: Ubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64+mac (20130214) IwConfig: Error: [Errno 2] No such file or directory Lsusb: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: Bochs Bochs MarkForUpload: True Package: linux (not installed) ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-34-generic root=UUID=158bb570-9333-4927-8645-ea360c6c5694 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.5.0-34.55~precise1-generic 3.5.7.13 RelatedPackageVersions: linux-restricted-modules-3.5.0-34-generic N/A linux-backports-modules-3.5.0-34-generic N/A linux-firmware1.79.4 RfKill: Error: [Errno 2] No such file or directory Tags: precise Uname: Linux 3.5.0-34-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 01/01/2007 dmi.bios.vendor: Bochs dmi.bios.version: Bochs dmi.chassis.type: 1 dm
[Kernel-packages] [Bug 1200996] Re: __schedule_bug+0x5f/0x63
Note: to run that last command, boot to a previous working kernel in order to collect the info. Thanks! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1200996 Title: __schedule_bug+0x5f/0x63 Status in “linux” package in Ubuntu: Incomplete Bug description: I've been getting boot up problems since 3.2.0-43 kernel update and unable to boot from the latest kernel since. http://i1269.photobucket.com/albums/jj583/Tuxinator/Ubuntu/IMG_0428_zpsb08d20c7.jpg Any ideas? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1200996/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1200996] Re: __schedule_bug+0x5f/0x63
Thanks for taking the time to report this bug and make Ubuntu better. If you are still having this problem, please run the following command to send more detailed information -- "apport-collect -p linux 1200996". ** Package changed: ubuntu => linux (Ubuntu) ** Changed in: linux (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1200996 Title: __schedule_bug+0x5f/0x63 Status in “linux” package in Ubuntu: Incomplete Bug description: I've been getting boot up problems since 3.2.0-43 kernel update and unable to boot from the latest kernel since. http://i1269.photobucket.com/albums/jj583/Tuxinator/Ubuntu/IMG_0428_zpsb08d20c7.jpg Any ideas? To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1200996/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1203594] Re: nexus7 grouper dpkg error on linux image and header upgrade
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1203594 Title: nexus7 grouper dpkg error on linux image and header upgrade Status in “linux” package in Ubuntu: Expired Bug description: Getting the following error both on "apt-get upgrade" and "apt-get -f dist-upgrade". If I restart the device (Nexus7) the wifi wont work. Installed latest flash images and retried with same problem. I original did a "apt-get install linux-nexus7" to find this problem as much of my Nexus 7 functionality was not working as in Ubuntu-Touch wasn't playing movies and sound wasn't working. All device partitions are flashed with latest images. I don't put in "saucy-preinstalled-touch-armel+grouper.zip" as it fails which maybe related to this very problem but another course in obtaining the error. ERRORBELOW- Unpacking linux-image-3.1.10-6-grouper (from .../linux-image-3.1.10-6-grouper_3.1.10-6.20_armhf.deb) ... Done. dpkg: error processing /var/cache/apt/archives/linux-image-3.1.10-6-grouper_3.1.10-6.20_armhf.deb (--unpack): unable to create `/lib/modules/3.1.10-6-grouper/modules.builtin.dpkg-new' (while processing `./lib/modules/3.1.10-6-grouper/modules.builtin'): Read-only file system dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.1.10-6-grouper /boot/vmlinuz-3.1.10-6-grouper Unpacking linux-headers-3.1.10-6-grouper (from .../linux-headers-3.1.10-6-grouper_3.1.10-6.20_armhf.deb) ... dpkg: error processing /var/cache/apt/archives/linux-headers-3.1.10-6-grouper_3.1.10-6.20_armhf.deb (--unpack): error creating symbolic link `./lib/modules/3.1.10-6-grouper/build': Read-only file system - To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1203594/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1203037] Re: [MICRO-STAR INTERNATIONAL CO., LTD MS-1454] suspend/resume failure
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1203037 Title: [MICRO-STAR INTERNATIONAL CO., LTD MS-1454] suspend/resume failure Status in “linux” package in Ubuntu: Expired Bug description: none ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-3-generic 3.10.0-3.12 ProcVersionSignature: Ubuntu 3.10.0-3.12-generic 3.10.1 Uname: Linux 3.10.0-3-generic i686 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.11-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: phoenix1656 F pulseaudio Date: Wed Jul 17 20:31:02 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=0706eaa6-12ea-4f12-8331-551fb8ab71fd InterpreterPath: /usr/bin/python3.3 Lsusb: Bus 002 Device 003: ID 046d:c06c Logitech, Inc. Optical Mouse Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: MICRO-STAR INTERNATIONAL CO., LTD MS-1454 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.10.0-3-generic root=UUID=93d6f3de-6246-4db0-9847-98af40412ef1 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.10.0-3-generic N/A linux-backports-modules-3.10.0-3-generic N/A linux-firmware1.112 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes SourcePackage: linux Title: [MICRO-STAR INTERNATIONAL CO., LTD MS-1454] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-07-12 (6 days ago) UserGroups: dmi.bios.date: 03/30/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: E1454IMS.110 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: MS-1454 dmi.board.vendor: MICRO-STAR INTERNATIONAL CO., LTD dmi.board.version: REV:1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: MS-1454 dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrE1454IMS.110:bd03/30/2010:svnMICRO-STARINTERNATIONALCO.,LTD:pnMS-1454:pvrREV1.0:rvnMICRO-STARINTERNATIONALCO.,LTD:rnMS-1454:rvrREV1.0:cvnMS-1454:ct10:cvrN/A: dmi.product.name: MS-1454 dmi.product.version: REV:1.0 dmi.sys.vendor: MICRO-STAR INTERNATIONAL CO., LTD To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1203037/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1203410] Re: [ASUSTeK Computer Inc. K54C] suspend/resume failure
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1203410 Title: [ASUSTeK Computer Inc. K54C] suspend/resume failure Status in “linux” package in Ubuntu: Expired Bug description: Resume failure. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-4-generic 3.10.0-4.13 ProcVersionSignature: Ubuntu 3.10.0-4.13-generic 3.10.1 Uname: Linux 3.10.0-4-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.11-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: demeter1883 F pulseaudio CurrentDmesg: [ 129.064689] atl1c :04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. Date: Sat Jul 20 20:47:10 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: InstallationDate: Installed on 2013-07-07 (13 days ago) InstallationMedia: InterpreterPath: /usr/bin/python3.3 MachineType: ASUSTeK Computer Inc. K54C MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.10.0-4-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.10.0-4-generic N/A linux-backports-modules-3.10.0-4-generic N/A linux-firmware1.112 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux Title: [ASUSTeK Computer Inc. K54C] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-07-08 (12 days ago) UserGroups: dmi.bios.date: 10/23/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: K54C.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: K54C dmi.board.vendor: ASUSTeK Computer Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK Computer Inc. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrK54C.210:bd10/23/2012:svnASUSTeKComputerInc.:pnK54C:pvr1.0:rvnASUSTeKComputerInc.:rnK54C:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr1.0: dmi.product.name: K54C dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK Computer Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1203410/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1203204] Re: [Acer Extensa 5635ZG] suspend/resume failure
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1203204 Title: [Acer Extensa 5635ZG] suspend/resume failure Status in “linux” package in Ubuntu: Expired Bug description: after boot crash ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-3-generic 3.10.0-3.12 [modified: boot/vmlinuz-3.10.0-3-generic] ProcVersionSignature: Ubuntu 3.10.0-3.12-generic 3.10.1 Uname: Linux 3.10.0-3-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.11-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: al 2034 F pulseaudio Date: Fri Jul 19 16:07:45 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=472a78e2-1f71-4376-8413-3b43ec51cd67 InstallationDate: Installed on 2013-07-19 (0 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130719) InterpreterPath: /usr/bin/python3.3 MachineType: Acer Extensa 5635ZG MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.10.0-3-generic root=UUID=6bf93862-9724-4d28-8214-54bfa86994a5 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.10.0-3-generic N/A linux-backports-modules-3.10.0-3-generic N/A linux-firmware1.112 SourcePackage: linux Title: [Acer Extensa 5635ZG] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 12/21/2009 dmi.bios.vendor: Phoenix dmi.bios.version: V1.3311 dmi.board.name: BA50-MV dmi.board.vendor: Acer dmi.board.version: Not Applicable dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenix:bvrV1.3311:bd12/21/2009:svnAcer:pnExtensa5635ZG:pvrNotApplicable:rvnAcer:rnBA50-MV:rvrNotApplicable:cvnAcer:ct10:cvrN/A: dmi.product.name: Extensa 5635ZG dmi.product.version: Not Applicable dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1203204/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1203418] Re: [Apple Inc. MacBookAir4, 1] suspend/resume failure [non-free: wl]
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1203418 Title: [Apple Inc. MacBookAir4,1] suspend/resume failure [non-free: wl] Status in “linux” package in Ubuntu: Expired Bug description: Logging in after the system died from the battery running out of power. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-3-generic 3.10.0-3.12 ProcVersionSignature: Ubuntu 3.10.0-3.12-generic 3.10.1 Uname: Linux 3.10.0-3-generic i686 NonfreeKernelModules: wl Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.10.2-0ubuntu4 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: m3talsmith 1838 F pulseaudio CurrentDmesg: [ 32.824496] postgres (1498): /proc/1498/oom_adj is deprecated, please use /proc/1498/oom_score_adj instead. [ 34.532212] init: plymouth-stop pre-start process (1630) terminated with status 1 Date: Sat Jul 20 23:43:56 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=583a703e-992e-4e2f-9cd7-6ff0ca103a3c InstallationDate: Installed on 2013-07-13 (7 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130712) InterpreterPath: /usr/bin/python3.3 MachineType: Apple Inc. MacBookAir4,1 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.10.0-3-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.10.0-3-generic N/A linux-backports-modules-3.10.0-3-generic N/A linux-firmware1.112 SourcePackage: linux Title: [Apple Inc. MacBookAir4,1] suspend/resume failure [non-free: wl] UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 01/24/2012 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBA41.88Z.0077.B0F.1201241549 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-C08A6BB70A942AC2 dmi.board.vendor: Apple Inc. dmi.board.version: MacBookAir4,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-C08A6BB70A942AC2 dmi.modalias: dmi:bvnAppleInc.:bvrMBA41.88Z.0077.B0F.1201241549:bd01/24/2012:svnAppleInc.:pnMacBookAir4,1:pvr1.0:rvnAppleInc.:rnMac-C08A6BB70A942AC2:rvrMacBookAir4,1:cvnAppleInc.:ct10:cvrMac-C08A6BB70A942AC2: dmi.product.name: MacBookAir4,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1203418/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1200996] [NEW] __schedule_bug+0x5f/0x63
You have been subscribed to a public bug: I've been getting boot up problems since 3.2.0-43 kernel update and unable to boot from the latest kernel since. http://i1269.photobucket.com/albums/jj583/Tuxinator/Ubuntu/IMG_0428_zpsb08d20c7.jpg Any ideas? ** Affects: linux (Ubuntu) Importance: Undecided Status: Incomplete ** Tags: bot-comment precise -- __schedule_bug+0x5f/0x63 https://bugs.launchpad.net/bugs/1200996 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1201674] Re: [Hewlett-Packard 520-1138cb] suspend/resume failure [non-free: wl]
Just updated to 3.11.0-8 and had same resuls as above -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1201674 Title: [Hewlett-Packard 520-1138cb] suspend/resume failure [non-free: wl] Status in “linux” package in Ubuntu: Confirmed Bug description: suspend resume failure again ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.11 ProcVersionSignature: Ubuntu 3.10.0-2.11-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 NonfreeKernelModules: wl Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.10.2-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kenn 1675 F pulseaudio Date: Mon Jul 15 23:48:08 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=f60e696f-fe9d-4216-86ec-ce13930c9c34 InstallationDate: Installed on 2013-07-10 (5 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130709) InterpreterPath: /usr/bin/python3.3 MachineType: Hewlett-Packard 520-1138cb MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.10.0-2-generic root=UUID=ee63e052-abe5-4316-8499-10528ed15dd7 ro recovery nomodeset rootflags=subvol=@ PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.112 SourcePackage: linux Title: [Hewlett-Packard 520-1138cb] suspend/resume failure [non-free: wl] UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 11/23/2012 dmi.bios.vendor: AMI dmi.bios.version: 7.09 dmi.board.asset.tag: 3CR22302J0 dmi.board.name: 2ADC dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.05 dmi.chassis.asset.tag: 3CR22302J0 dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnAMI:bvr7.09:bd11/23/2012:svnHewlett-Packard:pn520-1138cb:pvr1.00:rvnPEGATRONCORPORATION:rn2ADC:rvr1.05:cvnHewlett-Packard:ct3:cvr: dmi.product.name: 520-1138cb dmi.product.version: 1.00 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1201674/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1184165] Re: 03f0:1205 Scanner does not work: Simple scan gives a device busy error
Christopher M. Penalver, testing update (1) Booted into live DVD of Raring. Same problem, scanner does not work. Apport collect did not work even after installing python - see attached file of terminal dialogue (2) Booted into live DVD of Saucy. Could not even find simple scan or any menu. I correct my previous message, the Saucy install DVD does give the option to try it, i.e. run a live DVD environment. I just could not read it, because as I mentioned in my previous message, the explanations were not readeable, just plane character squares. This is a bug in the ISO image. Somebody selected the wrong font. (3) I also trried to follow your instruction (quote: ...Please do not test the daily kernel folder, but the one all the way at the bottom...), and tested kernel 3.12 - see attached file. Saccer does not work. Problems: (A) Presently I can boot into three environments: Raring and Saucy on sda, of which Saucy is extremely slow and useless. The third environment is FC3 on sdb. The problem is that since I installed Saucy it looks like grub only looks at the Sacy environment for cfg file. Can you please tell me how to get rid of Saucy and make sure grub reads the Raring cfg file at boot? (B) After I installed kernel 3.12 for testing my Raring environment has an error indicator on the update gizmo on top of the right hand corner of my screen telling me to run the Package Manager from the right click menu. The right click menu of that gizmo (sorry, I don't know the official name panel? aplet? etc.) only gives me choices of More or Remove. So can you please help me how to fix this condition. Please, understand that I'm new to Ubuntu and am not familiar with Ubuntu lingo, shortcuts, etc. One final note: are you sure it is a kernel problem that scanner does not work? Please, read my first message on top of this thread. lsusb recognizes the scanner, sane-find-scanner finds it, but scanimage cannot access it because it is "busy". ** Attachment added: "for item (1)" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1184165/+attachment/3832766/+files/Raring_LiveDVD_testing -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1184165 Title: 03f0:1205 Scanner does not work: Simple scan gives a device busy error Status in “linux” package in Ubuntu: Incomplete Bug description: This is a virgin installation of 13.04. Scanner is not found - reported by Simple scan. I tried Ask Ubuntu, but got no answer. I have a parallel installation of 12.xx on the same computer, and scanner does work. So what is specific about 13.04? I have also an old FC-3 installation and the scanner works, using sane with xinetd. I notice that 13.04 does not use xinetd. So how is the scanner accessed? Whatever it is, it works on 12.xx and does not on 13.04. In terminal mode: sane-find-scanner found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x1205 [hp scanjet scanner]) at libusb:002:002 scanimage -L [hp5590] hp5590_get_status: USB-in-USB: got non-zero device status (status 12) [hp5590] hp5590_init_scanner: scanner reports non-zero status: Device busy lsusb Bus 002 Device 002: ID 03f0:1205 Hewlett-Packard ScanJet 4500C/5550C Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub --- ApportVersion: 2.9.2-0ubuntu8.3 Architecture: i386 DistroRelease: Ubuntu 13.04 InstallationDate: Installed on 2013-05-14 (130 days ago) InstallationMedia: Xubuntu 13.04 "Raring Ringtail" - Release i386 (20130423.1) MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash Tags: raring Uname: Linux 3.12.0-031200rc1-generic i686 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dialout dip fax floppy fuse plugdev sambashare saned scanner sudo tape video To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1184165/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1184165] Re: 03f0:1205 Scanner does not work: Simple scan gives a device busy error
Christopher M. Penalver, - attachment #2 apparently I can only attach one file, so here is the other one referenced in my previous message, testing item (3) ** Attachment added: "Testing_Mainline_kernel_3.12.0-generic" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1184165/+attachment/3832767/+files/Testing_Mainline_kernel_3.12.0-generic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1184165 Title: 03f0:1205 Scanner does not work: Simple scan gives a device busy error Status in “linux” package in Ubuntu: Incomplete Bug description: This is a virgin installation of 13.04. Scanner is not found - reported by Simple scan. I tried Ask Ubuntu, but got no answer. I have a parallel installation of 12.xx on the same computer, and scanner does work. So what is specific about 13.04? I have also an old FC-3 installation and the scanner works, using sane with xinetd. I notice that 13.04 does not use xinetd. So how is the scanner accessed? Whatever it is, it works on 12.xx and does not on 13.04. In terminal mode: sane-find-scanner found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x1205 [hp scanjet scanner]) at libusb:002:002 scanimage -L [hp5590] hp5590_get_status: USB-in-USB: got non-zero device status (status 12) [hp5590] hp5590_init_scanner: scanner reports non-zero status: Device busy lsusb Bus 002 Device 002: ID 03f0:1205 Hewlett-Packard ScanJet 4500C/5550C Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub --- ApportVersion: 2.9.2-0ubuntu8.3 Architecture: i386 DistroRelease: Ubuntu 13.04 InstallationDate: Installed on 2013-05-14 (130 days ago) InstallationMedia: Xubuntu 13.04 "Raring Ringtail" - Release i386 (20130423.1) MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash Tags: raring Uname: Linux 3.12.0-031200rc1-generic i686 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dialout dip fax floppy fuse plugdev sambashare saned scanner sudo tape video To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1184165/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1035556] Re: 1002:9442 Monitor not detected via DisplayPort [Radeon HD 4850]
** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1035556 Title: 1002:9442 Monitor not detected via DisplayPort [Radeon HD 4850] Status in “linux” package in Ubuntu: Confirmed Bug description: I have a PowerColor AX4850 512MD3-DHO video card, a BenQ XL2420TX monitor, and a Dell 3008WFP monitor. I tried to connect the BenQ monitor with the DisplayPort connection. This video driver did not recognize that there was anything plugged in. Even if the BenQ was the only monitor connected, the OS driver found nothing. WORKAROUND: The ATI binary BLOB did properly recognize this monitor plugged in to the DisplayPort, but that driver is unusable for other reasons. I currently have this monitor connected via HDMI, but this connection precludes the use of 120 hz refresh and 3D video. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xserver-xorg-video-radeon 1:6.14.99~git20111219.aacbd629-0ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-29.46-generic 3.2.24 Uname: Linux 3.2.0-29-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu12 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,snap,expo,move,resize,scale,regex] CompositorRunning: None Date: Fri Aug 10 21:37:57 2012 DistUpgraded: 2012-04-28 14:29:07,399 DEBUG enabling apt cron job DistroCodename: precise DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Advanced Micro Devices [AMD] nee ATI RV770 [Radeon HD 4850] [1002:9442] (prog-if 00 [VGA controller]) Subsystem: Hightech Information System Ltd. Device [1787:2266] InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) MachineType: System manufacturer System Product Name ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-29-generic root=UUID=c2921384-38b9-419e-b7ef-007bcc801561 ro nosplash debug --verbose SourcePackage: xserver-xorg-video-ati UpgradeStatus: Upgraded to precise on 2012-04-28 (104 days ago) dmi.bios.date: 09/21/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2209 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: P6T DELUXE dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2209:bd09/21/2010:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP6TDELUXE:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz 1:0.9.7.8-0ubuntu1.2 version.ia32-libs: ia32-libs 20090808ubuntu36 version.libdrm2: libdrm2 2.4.32-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.2-0ubuntu3.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.2-0ubuntu3.1 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.6 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build2 --- ApportVersion: 2.12-0ubuntu3 Architecture: amd64 CasperVersion: 1.336 DistroRelease: Ubuntu 13.10 IwConfig: eth0 no wireless extensions. eth1 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130817) MachineType: System manufacturer System Product Name MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5 RelatedPackageVersions: linux-restricted-modules-3.11.0-2-generic N/A linux-backports-modules-3.11.0-2-generic N/A linux-firmware1.113 RfKill: Tags: saucy Uname: Linux 3.11.0-2-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 09/21/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2209 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: P6T DELUXE dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev
[Kernel-packages] [Bug 1009312] Re: 10de:0426 GPU loads unreliably, possible kernel timeout
I was a little confused about exactly which version of the kernel you wanted to test, but it's a moot point because all of the ones I tried had the bug still. I'm still using Ubuntu 12.04 so sudo apt-get dist-upgrade just keeps me on v3.5.0-40, which definitely has the bug. I also tested v3.11-rc1 (built 7/14) off of the Ubuntu Mainline PPA, v3.11-rc5 (it had the patch by Rafael Wysocki I mentioned previously), and v3.12-rc1 (the latest version). Every single one showed the bug, which I confirmed by checking the dmesg logs after booting up with a stable kernel. Actually, none of those three kernels even made it to the login screen. It's a little unnerving that whatever changes fixed the bug around May this year have been canceled out since then. Seeing the glass half-full though, once I have some free time, I can do a standard bisection to see where the fix was knocked out. That might give us a little more data to work with. ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1009312 Title: 10de:0426 GPU loads unreliably, possible kernel timeout Status in “linux” package in Ubuntu: Confirmed Bug description: Reverse upstream kernel commit bisecting revealed a fix via commit d34883d4e35c0a994e91dd847a82b4c9e0c31d83 by Xiao Guangrong. WORKAROUND: If I boot my computer from battery power alone without AC, my GPU & the Ubuntu splash screen load on startup. I've been running Ubuntu 12.04 for a few weeks now, I really like it, but from the beginning, I had the issue where the proprietary nvidia driver installs but fails to load (confirmed from the commandline, jockey, and the nvidia-dashboard). Over time, I've noticed that sometimes when I power on, the driver does load and I can enter a full unity session without problems, but other times, I fall back onto the VESA driver and a unity 2d session. On a whim, I finally copied logs from both successful and unsuccessful boots, cut out the times, ran a diff on them, and noticed a pattern in the kernel messages. I'm filing this bug after a successful boot so I've also attached copies of dmesg, Xorg, & jockey logs from an unsuccessful boot. The first thing I saw in the logs was a timing discrepancy between the two boots, most of which is due to GPE storms. I've checked other logs and there's not a clear relation, I've had successful boots with them and unsuccessful ones without them. I do still wonder if they may be involved because it seems I'm a little luckier if I turn off and unplug any peripherals before booting. But around line 325 in my dmesg logs, at the last step that mentions my GPU (pci device :01:00.0), there is consistently at most a 6 ms delay for successful boots, but a 30 ms one for unsuccessful ones. Also, on all dmesg logs from successful boots, around line 610, the message "Boot video device" is recorded for the PCI number of my GPU, but for every fallback, the message never appears. That's why I'm thinking it's a kernel issue because the earliest mention of a specific driver module doesn't occur until later in the log. I'm currently using fully updated versions of nvidia driver 295.49. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-24-generic-pae 3.2.0-24.39 ProcVersionSignature: Ubuntu 3.2.0-24.39-generic-pae 3.2.16 Uname: Linux 3.2.0-24-generic-pae i686 NonfreeKernelModules: nvidia AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu8 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kyle 1790 F pulseaudio Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xfc40 irq 48' Mixer name : 'SigmaTel STAC9872AK' Components : 'HDA:83847662,104d1c00,00100201 HDA:14f12c06,104d1700,0010' Controls : 18 Simple ctrls : 9 Date: Tue Jun 5 22:44:22 2012 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=1b676222-44c7-453c-a522-06b6fd5d66f4 InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release i386 (20120423) MachineType: Sony Corporation VGN-FZ260E PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.2.0-24-generic-pae root=UUID=e330e46a-b426-439f-8037-c1069cc693ce ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-24-generic-pae N/A linux-backports-modules-3.2.0-24-generic-pae N/A l
[Kernel-packages] [Bug 1184165] Re: 03f0:1205 Scanner does not work: Simple scan gives a device busy error
apport information ** Tags added: apport-collected ** Description changed: This is a virgin installation of 13.04. Scanner is not found - reported by Simple scan. I tried Ask Ubuntu, but got no answer. I have a parallel installation of 12.xx on the same computer, and scanner does work. So what is specific about 13.04? I have also an old FC-3 installation and the scanner works, using sane with xinetd. I notice that 13.04 does not use xinetd. So how is the scanner accessed? Whatever it is, it works on 12.xx and does not on 13.04. In terminal mode: sane-find-scanner found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x1205 [hp scanjet scanner]) at libusb:002:002 scanimage -L [hp5590] hp5590_get_status: USB-in-USB: got non-zero device status (status 12) [hp5590] hp5590_init_scanner: scanner reports non-zero status: Device busy lsusb Bus 002 Device 002: ID 03f0:1205 Hewlett-Packard ScanJet 4500C/5550C Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub + --- + ApportVersion: 2.9.2-0ubuntu8.3 + Architecture: i386 + DistroRelease: Ubuntu 13.04 + InstallationDate: Installed on 2013-05-14 (130 days ago) + InstallationMedia: Xubuntu 13.04 "Raring Ringtail" - Release i386 (20130423.1) + MarkForUpload: True + Package: linux (not installed) + ProcEnviron: + TERM=xterm + PATH=(custom, no user) + XDG_RUNTIME_DIR= + LANG=en_US.UTF-8 + SHELL=/bin/bash + Tags: raring + Uname: Linux 3.12.0-031200rc1-generic i686 + UnreportableReason: The running kernel is not an Ubuntu kernel + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm audio cdrom dialout dip fax floppy fuse plugdev sambashare saned scanner sudo tape video ** Attachment added: "HookError_cloud_archive.txt" https://bugs.launchpad.net/bugs/1184165/+attachment/3832750/+files/HookError_cloud_archive.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1184165 Title: 03f0:1205 Scanner does not work: Simple scan gives a device busy error Status in “linux” package in Ubuntu: Incomplete Bug description: This is a virgin installation of 13.04. Scanner is not found - reported by Simple scan. I tried Ask Ubuntu, but got no answer. I have a parallel installation of 12.xx on the same computer, and scanner does work. So what is specific about 13.04? I have also an old FC-3 installation and the scanner works, using sane with xinetd. I notice that 13.04 does not use xinetd. So how is the scanner accessed? Whatever it is, it works on 12.xx and does not on 13.04. In terminal mode: sane-find-scanner found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x1205 [hp scanjet scanner]) at libusb:002:002 scanimage -L [hp5590] hp5590_get_status: USB-in-USB: got non-zero device status (status 12) [hp5590] hp5590_init_scanner: scanner reports non-zero status: Device busy lsusb Bus 002 Device 002: ID 03f0:1205 Hewlett-Packard ScanJet 4500C/5550C Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub --- ApportVersion: 2.9.2-0ubuntu8.3 Architecture: i386 DistroRelease: Ubuntu 13.04 InstallationDate: Installed on 2013-05-14 (130 days ago) InstallationMedia: Xubuntu 13.04 "Raring Ringtail" - Release i386 (20130423.1) MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash Tags: raring Uname: Linux 3.12.0-031200rc1-generic i686 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm audio cdrom dialout dip fax floppy fuse plugdev sambashare saned scanner sudo tape video To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1184165/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1212977] Re: saucy daily-live images are unbootable on Dell Optiplex 990 and other hardware combinations; drops to and stuck in BusyBox shell
The ISO of 2013-09-20 that contained the 3.11.0-7 #14 kernel does not boot and the same issue remains. Removed tags as my hardware has the latest BIOS. A new 3.11.0-8 #15 has landed and I will test as soon as it's runs into the latest daily ISO. ** Summary changed: - saucy daily-live images are unbootable on Dell Optiplex 990; stuck in BusyBox shell + saucy daily-live images are unbootable on Dell Optiplex 990 and other hardware combinations; drops to and stuck in BusyBox shell ** Description changed: - saucy daily-live images are unbootable on Dell Optiplex 990. I just get a BusyBox shell. - I have tried the latest live images for the past few days without any luck. And the bug persists regardless of which graphics card (or none) I have in. + saucy daily-live images are unbootable on Dell Optiplex 990 and other + hardware combinations. I just get a BusyBox shell. - Tried at least: - http://cdimage.ubuntu.com/daily-live/20130814/ - http://cdimage.ubuntu.com/daily-live/20130815/ - - and the Optiplex 990 cannot boot them. - - Interestingly, the same USB images do boot successfully on a Thinkpad X220. - --- + --- ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 AudioDevicesInUse: - USERPID ACCESS COMMAND - /dev/snd/controlC0: dan2083 F pulseaudio + USERPID ACCESS COMMAND + /dev/snd/controlC0: dan2083 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=9e3dac8a-8fa4-4da5-b4d2-52b2ee5fd022 InstallationDate: Installed on 2013-06-03 (76 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) IwConfig: - eth0 no wireless extensions. - - lono wireless extensions. + eth0 no wireless extensions. + + lono wireless extensions. MachineType: Dell Inc. OptiPlex 990 MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-25-generic root=UUID=416f5f80-6d98-4208-a3f5-ef272b12e5c6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-25.37-generic 3.8.13 RelatedPackageVersions: - linux-restricted-modules-3.8.0-25-generic N/A - linux-backports-modules-3.8.0-25-generic N/A - linux-firmware1.106 + linux-restricted-modules-3.8.0-25-generic N/A + linux-backports-modules-3.8.0-25-generic N/A + linux-firmware1.106 RfKill: - + Tags: raring Uname: Linux 3.8.0-25-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 09/10/2011 dmi.bios.vendor: Dell Inc. dmi.bios.version: A07 dmi.board.name: 0D6H9T dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA07:bd09/10/2011:svnDellInc.:pnOptiPlex990:pvr01:rvnDellInc.:rn0D6H9T:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 990 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. ** Tags removed: bios-outdated-a17 bot-comment kernel-key kernel- request-3.11.0-7.14 ** Summary changed: - saucy daily-live images are unbootable on Dell Optiplex 990 and other hardware combinations; drops to and stuck in BusyBox shell + saucy daily-live images are unbootable on Dell Optiplex 990 and other hardware combinations (Gigabyte GA-970a-DS3 Rev: 1.0 motherboard); drops to and stuck in BusyBox shell ** Changed in: linux (Ubuntu Saucy) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1212977 Title: saucy daily-live images are unbootable on Dell Optiplex 990 and other hardware combinations (Gigabyte GA-970a-DS3 Rev: 1.0 motherboard); drops to and stuck in BusyBox shell Status in “casper” package in Ubuntu: Invalid Status in “linux” package in Ubuntu: Confirmed Status in “udev” package in Ubuntu: Confirmed Status in “casper” source package in Saucy: Invalid Status in “linux” source package in Saucy: Confirmed Status in “udev” source package in Saucy: Confirmed Bug description: saucy daily-live images are unbootable on Dell Optiplex 990 and other hardware combinations. I just get a BusyBox shell. --- ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: dan2083 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=9e3dac8a-8fa4-4da5-b4d2-52b2ee5fd022 InstallationDate: Installed on 2013-06-03 (76 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) IwConfig: eth0 no wir
[Kernel-packages] [Bug 1193661] Re: [Apple Inc. MacBookPro10, 1] suspend/resume failure [non-free: wl]
Ah, apologies. I see this is a more correct version of the bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1186818 My apologies. I'm new at reporting issues to this project. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1193661 Title: [Apple Inc. MacBookPro10,1] suspend/resume failure [non-free: wl] Status in “linux” package in Ubuntu: Incomplete Status in “linux” source package in Saucy: Incomplete Bug description: as many have noted... runnimg ubuntu on a retina macbook has many issues... this specific bug prevents the mac from waking back up from suspended state after closing the lid. Also the screen brightness is not controllable. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.9.0-6-generic 3.9.0-6.14 ProcVersionSignature: Ubuntu 3.9.0-6.14-generic 3.9.6 Uname: Linux 3.9.0-6-generic x86_64 NonfreeKernelModules: wl Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.10.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: roland 1434 F pulseaudio /dev/snd/controlC0: roland 1434 F pulseaudio Date: Sat Jun 22 12:46:28 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=90f54f23-810f-4c22-8b5b-015897e7bc6e InstallationDate: Installed on 2013-06-21 (0 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64+mac (20130621) InterpreterPath: /usr/bin/python3.3 MachineType: Apple Inc. MacBookPro10,1 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.9.0-6-generic root=UUID=59486b17-48bc-4fd8-a452-57a1fb6f2f08 ro acpi_backlight=vendor quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.9.0-6-generic N/A linux-backports-modules-3.9.0-6-generic N/A linux-firmware 1.109 SourcePackage: linux Title: [Apple Inc. MacBookPro10,1] suspend/resume failure [non-free: wl] UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 08/08/2012 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBP101.88Z.00EE.B02.1208081132 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-C3EC7CD22292981F dmi.board.vendor: Apple Inc. dmi.board.version: MacBookPro10,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-C3EC7CD22292981F dmi.modalias: dmi:bvnAppleInc.:bvrMBP101.88Z.00EE.B02.1208081132:bd08/08/2012:svnAppleInc.:pnMacBookPro10,1:pvr1.0:rvnAppleInc.:rnMac-C3EC7CD22292981F:rvrMacBookPro10,1:cvnAppleInc.:ct10:cvrMac-C3EC7CD22292981F: dmi.product.name: MacBookPro10,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1193661/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1193661] Re: [Apple Inc. MacBookPro10, 1] suspend/resume failure [non-free: wl]
I continue to experience something similar on a Macbook 9,1 Retina. I'm unsure if this should be a separate bug but the symptoms are exactly the same. Kernel version: Ubuntu 3.11.0-8.15-generic 3.11.1 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1193661 Title: [Apple Inc. MacBookPro10,1] suspend/resume failure [non-free: wl] Status in “linux” package in Ubuntu: Incomplete Status in “linux” source package in Saucy: Incomplete Bug description: as many have noted... runnimg ubuntu on a retina macbook has many issues... this specific bug prevents the mac from waking back up from suspended state after closing the lid. Also the screen brightness is not controllable. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.9.0-6-generic 3.9.0-6.14 ProcVersionSignature: Ubuntu 3.9.0-6.14-generic 3.9.6 Uname: Linux 3.9.0-6-generic x86_64 NonfreeKernelModules: wl Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.10.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: roland 1434 F pulseaudio /dev/snd/controlC0: roland 1434 F pulseaudio Date: Sat Jun 22 12:46:28 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=90f54f23-810f-4c22-8b5b-015897e7bc6e InstallationDate: Installed on 2013-06-21 (0 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64+mac (20130621) InterpreterPath: /usr/bin/python3.3 MachineType: Apple Inc. MacBookPro10,1 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.9.0-6-generic root=UUID=59486b17-48bc-4fd8-a452-57a1fb6f2f08 ro acpi_backlight=vendor quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.9.0-6-generic N/A linux-backports-modules-3.9.0-6-generic N/A linux-firmware 1.109 SourcePackage: linux Title: [Apple Inc. MacBookPro10,1] suspend/resume failure [non-free: wl] UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 08/08/2012 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBP101.88Z.00EE.B02.1208081132 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-C3EC7CD22292981F dmi.board.vendor: Apple Inc. dmi.board.version: MacBookPro10,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-C3EC7CD22292981F dmi.modalias: dmi:bvnAppleInc.:bvrMBP101.88Z.00EE.B02.1208081132:bd08/08/2012:svnAppleInc.:pnMacBookPro10,1:pvr1.0:rvnAppleInc.:rnMac-C3EC7CD22292981F:rvrMacBookPro10,1:cvnAppleInc.:ct10:cvrMac-C3EC7CD22292981F: dmi.product.name: MacBookPro10,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1193661/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1228472] Re: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bcmwl in Ubuntu. https://bugs.launchpad.net/bugs/1228472 Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build Status in “bcmwl” package in Ubuntu: New Bug description: Was trying to reinstall module to allow me to update my broadcom driver and use WiFi. Found this solution for what i thought was a very similar card on the ubuntuforums My pci.id is 14e4:4353, the solution on the forum was for 14e4:4358 ProblemType: Package DistroRelease: Ubuntu 12.04 Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1 ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5 Uname: Linux 3.8.0-29-generic x86_64 ApportVersion: 2.0.1-0ubuntu17.4 Architecture: amd64 DKMSKernelVersion: 3.8.0-29-generic Date: Fri Sep 20 22:04:35 2013 MarkForUpload: True PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1 SourcePackage: bcmwl Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1228472/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1228472] [NEW] bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build
Public bug reported: Was trying to reinstall module to allow me to update my broadcom driver and use WiFi. Found this solution for what i thought was a very similar card on the ubuntuforums My pci.id is 14e4:4353, the solution on the forum was for 14e4:4358 ProblemType: Package DistroRelease: Ubuntu 12.04 Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1 ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5 Uname: Linux 3.8.0-29-generic x86_64 ApportVersion: 2.0.1-0ubuntu17.4 Architecture: amd64 DKMSKernelVersion: 3.8.0-29-generic Date: Fri Sep 20 22:04:35 2013 MarkForUpload: True PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1 SourcePackage: bcmwl Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: bcmwl (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package precise -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bcmwl in Ubuntu. https://bugs.launchpad.net/bugs/1228472 Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build Status in “bcmwl” package in Ubuntu: New Bug description: Was trying to reinstall module to allow me to update my broadcom driver and use WiFi. Found this solution for what i thought was a very similar card on the ubuntuforums My pci.id is 14e4:4353, the solution on the forum was for 14e4:4358 ProblemType: Package DistroRelease: Ubuntu 12.04 Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1 ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5 Uname: Linux 3.8.0-29-generic x86_64 ApportVersion: 2.0.1-0ubuntu17.4 Architecture: amd64 DKMSKernelVersion: 3.8.0-29-generic Date: Fri Sep 20 22:04:35 2013 MarkForUpload: True PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1 SourcePackage: bcmwl Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1228472/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1224221] Re: Problem with Sleep/Wake in Ubuntu 13.04 and greater
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/522998/comments/42 The link above is the USB3 fix I implemented with 12.10 to get it to sleep and wake with this hardware I am currently using. It makes no effect to the 13.04+ kernel graphics corruption bug tho. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1224221 Title: Problem with Sleep/Wake in Ubuntu 13.04 and greater Status in “linux” package in Ubuntu: Incomplete Bug description: I am using a nVidia Graphics with default drivers and I am unable to wake up my system without it being crashed with garbage on the screen. This happens in LiveCD mode or installed and all versions of Kubuntu/Ubuntu/Gbunutu that I have tested, all of them are the same result. This has stopped moving to Linux when I need it most (Windows 8/8.1 is terrible) I had reported that I thought it was due to dual graphics (Switchable) but I've disabled the intel graphics in BIOS and the problem persisted. I think this is a Kernel level problem or perhaps xOrg related. I can offer no other information as the only thing I can do is reboot the system and disable sleep entirely. I don't think my system could be the only one getting this problem, so hopefully someone with more experience in reporting bugs can figure this out so that the final 13.10 will work for me :( --- ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 6220 F pulseaudio CasperVersion: 1.331 DistroRelease: Ubuntu 13.04 LiveMediaBuild: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MachineType: System manufacturer System Product Name MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG= SHELL=/bin/bash ProcFB: 0 nouveaufb ProcKernelCmdLine: bootkbd=us console-setup/layoutcode=en_US console-setup/variantcode=nodeadkeys locale=us_us persistent noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz splash -- ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: raring Uname: Linux 3.8.0-19-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 11/09/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3603 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: MAXIMUS IV GENE-Z/GEN3 dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3603:bd11/09/2012:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnMAXIMUSIVGENE-Z/GEN3:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1224221/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1201869] Re: poor networking throughput across an OpenStack Neutron router on 3.5/3.8 kernels
The 3.5 version of this fix has been verified for throughput and stability. Unfortunately the 3.8 verification could not be done at this time. ** Tags removed: verification-needed-quantal ** Tags added: verification-done-quantal ** Tags removed: verification-done-quantal ** Tags added: verification-quantal-done -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1201869 Title: poor networking throughput across an OpenStack Neutron router on 3.5/3.8 kernels Status in “linux” package in Ubuntu: Fix Released Status in “linux” source package in Quantal: In Progress Status in “linux” source package in Raring: In Progress Bug description: SRU Justification: Impact: Users of the 3.5/3.8 kernel will have poor network throughput when using OpenStack Neutron depending on their setup. Fix: These upstream patches are necessary to fix the issue: 2681128f0ced8aa4e66f221197e183cc16d244fe 8093315a91340bca52549044975d8c7f673b28a1 d0e2c55e7c940a3ee91e9e23a2683b593690f1e9 2efd32ee1b60b0b31404ca47c1ce70e5a5d24ebc f45a5c267da35174e22cec955093a7513dc1623d Testcase: Setup OpenStack Neutron. Test throughput between internal and external nodes. The following explains an example vlan+namespace configuration: Internal Node: [10.x.x.2]->eth2.123->br123->tap123->qr-123[10.x.x.1] <--- netns: qrouter-123 netns: qrouter-123 ---> qg-234[10.x.y.1]->tap234->br234->eth2.234->External Node[10.x.y.2] Where: 1) tap123+qr-123 and tap234+qg-234 are veth pairs 2) qr-123 and qg-234 reside inside the qrouter-123 namespace -- OpenStack Neutron does IP forwarding through a network namespace. A veth pair is used to connect into the namespace. The veth pair appears to be the bottleneck, independent of network namespace. In newer versions of Linux (Ubuntu-3.9.0-7.15 / v3.9-rc1 and greater) throughput is much higher by almost 3 times. For example with some testing throughput is 3.5 Gbps in pre 3.9-rc1 versions and 9.1 Gbps with these patches applied. This has been confirmed on kernels from 3.5.x-3.8.x. (Quantal and Raring lts backports) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1201869/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1224221] Re: Problem with Sleep/Wake in Ubuntu 13.04 and greater
I thought I'd try 12.04 LTS again for the first time in ages, to make sure the sleep bug still didn't affect this PC with it, but now it does: It stays on a black screen and doesn't resume at all anymore, pressing ctrl + alt F1 showed nouveau called panic error (shown in terminal under the initializing section). So this PC may have bigger compatibility issues with the Linux Kernels than I thought. I fixed it last time (From not waking) by making it shutdown then reboot the USB stack at shutdown/wake tho. So I know this kernel can work properly with it. I thought it was 12.10 that I had to add the USB commands to the proc files, which is why I said 13.04 was the first time the fix no longer worked for me. I'll try to find the USB fix again and see if that makes a difference to all the problems I am having with my power management, I just wish I could use the SysRq captures to report the proper oops, but it says this function isn't available when I try to use them. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1224221 Title: Problem with Sleep/Wake in Ubuntu 13.04 and greater Status in “linux” package in Ubuntu: Incomplete Bug description: I am using a nVidia Graphics with default drivers and I am unable to wake up my system without it being crashed with garbage on the screen. This happens in LiveCD mode or installed and all versions of Kubuntu/Ubuntu/Gbunutu that I have tested, all of them are the same result. This has stopped moving to Linux when I need it most (Windows 8/8.1 is terrible) I had reported that I thought it was due to dual graphics (Switchable) but I've disabled the intel graphics in BIOS and the problem persisted. I think this is a Kernel level problem or perhaps xOrg related. I can offer no other information as the only thing I can do is reboot the system and disable sleep entirely. I don't think my system could be the only one getting this problem, so hopefully someone with more experience in reporting bugs can figure this out so that the final 13.10 will work for me :( --- ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 6220 F pulseaudio CasperVersion: 1.331 DistroRelease: Ubuntu 13.04 LiveMediaBuild: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MachineType: System manufacturer System Product Name MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG= SHELL=/bin/bash ProcFB: 0 nouveaufb ProcKernelCmdLine: bootkbd=us console-setup/layoutcode=en_US console-setup/variantcode=nodeadkeys locale=us_us persistent noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz splash -- ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: raring Uname: Linux 3.8.0-19-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 11/09/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 3603 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: MAXIMUS IV GENE-Z/GEN3 dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr3603:bd11/09/2012:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnMAXIMUSIVGENE-Z/GEN3:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1224221/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1140716] Re: [regression] 3.5.0-26-generic and 3.2.0-39-generic GPU hangs on Sandybridge
** Tags added: patch -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1140716 Title: [regression] 3.5.0-26-generic and 3.2.0-39-generic GPU hangs on Sandybridge Status in Direct Rendering Infrastructure: Confirmed Status in The Linux Kernel: Invalid Status in “linux” package in Ubuntu: Invalid Status in “linux-lts-quantal” package in Ubuntu: Invalid Status in “linux-lts-raring” package in Ubuntu: New Status in “linux” source package in Precise: Fix Released Status in “linux-lts-quantal” source package in Precise: Fix Released Status in “linux-lts-raring” source package in Precise: New Status in “linux” source package in Quantal: Fix Released Status in “linux-lts-quantal” source package in Quantal: Invalid Status in “linux” source package in Raring: Confirmed Status in “linux-lts-quantal” source package in Raring: Invalid Status in “linux” package in Debian: New Status in “linux” package in Fedora: Unknown Bug description: I'm getting errors about GPU hangs every minute or so (usually only when using FF and scrolling a webpage or something). I also get an annoying ubuntu dialog saying there is a "system error". This didn't happen with 3.5.0-24-generic. Here is the dmesg: [15169.033709] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [15169.034517] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [15628.480216] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [15628.480570] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [15844.231372] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [15844.231773] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [20173.232593] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [20173.233211] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [26285.650393] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [26285.650980] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [26285.658405] [ cut here ] [26285.658472] WARNING: at /build/buildd/linux-3.5.0/drivers/gpu/drm/i915/intel_pm.c:2505 gen6_enable_rps+0x706/0x710 [i915]() [26285.658474] Hardware name: SATELLITE Z830 [26285.658476] Modules linked in: sdhci_pci sdhci btrfs zlib_deflate libcrc32c ufs qnx4 hfsplus hfs minix ntfs msdos jfs xfs reiserfs ext2 snd_hda_codec_hdmi snd_hda_codec_realtek joydev btusb coretemp kvm_intel kvm arc4 ghash_clmulni_intel aesni_intel cryptd aes_x86_64 snd_hda_intel snd_hda_codec snd_hwdep uvcvideo snd_pcm videobuf2_core microcode videodev bnep iwlwifi videobuf2_vmalloc snd_seq_midi psmouse videobuf2_memops snd_rawmidi rfcomm pcspkr snd_seq_midi_event serio_raw snd_seq bluetooth mac80211 snd_timer snd_seq_device i915 drm_kms_helper cfg80211 drm toshiba_acpi snd sparse_keymap soundcore wmi i2c_algo_bit toshiba_bluetooth snd_page_alloc parport_pc mei video mac_hid lpc_ich ppdev nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc lp parport e1000e ahci libahci [last unloaded: sdhci] [26285.658537] Pid: 23433, comm: kworker/u:0 Not tainted 3.5.0-26-generic #40-Ubuntu [26285.658539] Call Trace: [26285.658549] [] warn_slowpath_common+0x7f/0xc0 [26285.658553] [] warn_slowpath_null+0x1a/0x20 [26285.658569] [] gen6_enable_rps+0x706/0x710 [i915] [26285.658584] [] intel_modeset_init_hw+0x66/0xa0 [i915] [26285.658595] [] i915_reset+0x1a4/0x6e0 [i915] [26285.658601] [] ? __switch_to+0x12b/0x420 [26285.658612] [] i915_error_work_func+0xc3/0x110 [i915] [26285.658618] [] process_one_work+0x12a/0x420 [26285.658629] [] ? gen6_pm_rps_work+0xe0/0xe0 [i915] [26285.658632] [] worker_thread+0x12e/0x2f0 [26285.658636] [] ? manage_workers.isra.26+0x200/0x200 [26285.658640] [] kthread+0x93/0xa0 [26285.658644] [] kernel_thread_helper+0x4/0x10 [26285.658649] [] ? kthread_freezable_should_stop+0x70/0x70 [26285.658652] [] ? gs_change+0x13/0x13 [26285.658654] ---[ end trace 59c6162fdfcbffee ]--- [26756.021167] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [26756.021426] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [26766.014093] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [26766.014397] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [26932.376233] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung [26932.376544] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [26932.384285] [ cut here ] [26932.384354] WARNING: at /build/buildd/linux-3.5.0/drivers/gpu/drm/i915/intel_pm.c:2505 gen6_enable_rps+0x706/0x710 [i915]() [26932.384356] Hardware name: SATELLITE Z830 [26932.384358] Modules linked in: sdhci_pci sdhci btrfs zlib_deflate libcrc32c ufs qnx4 hfsplus hfs minix ntfs msdos jfs xfs reiserfs
[Kernel-packages] [Bug 1228448] [NEW] bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build
*** This bug is a duplicate of bug 1228380 *** https://bugs.launchpad.net/bugs/1228380 Public bug reported: I am uncertain if this is a new bug as I am not sure how to describe what has happened. I was doing a clean install of Ubuntu 12.04 and suddenly got an error message indicating there was a problem in or with "bcmwl", whatever that is. It has caused my laptop to become non respondant and I had to restart it, but as it only has half an operating system it won't work so I have gone back to Windows as I urgently need the laptop to do my university work. I may try Ubuntu again at some future date, but it won't be until such a time as I can afford to have a laptop non-functional while I try to resolve very annoying issues. Regards ProblemType: Package DistroRelease: Ubuntu 12.04 Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1 ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5 Uname: Linux 3.8.0-29-generic i686 ApportVersion: 2.0.1-0ubuntu17.4 Architecture: i386 DKMSKernelVersion: 3.8.0-30-generic Date: Sat Sep 21 11:53:00 2013 InstallationMedia: Ubuntu 12.04.3 LTS "Precise Pangolin" - Release i386 (20130820.1) MarkForUpload: True PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1 SourcePackage: bcmwl Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: bcmwl (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 precise -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bcmwl in Ubuntu. https://bugs.launchpad.net/bugs/1228448 Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build Status in “bcmwl” package in Ubuntu: New Bug description: I am uncertain if this is a new bug as I am not sure how to describe what has happened. I was doing a clean install of Ubuntu 12.04 and suddenly got an error message indicating there was a problem in or with "bcmwl", whatever that is. It has caused my laptop to become non respondant and I had to restart it, but as it only has half an operating system it won't work so I have gone back to Windows as I urgently need the laptop to do my university work. I may try Ubuntu again at some future date, but it won't be until such a time as I can afford to have a laptop non-functional while I try to resolve very annoying issues. Regards ProblemType: Package DistroRelease: Ubuntu 12.04 Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1 ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5 Uname: Linux 3.8.0-29-generic i686 ApportVersion: 2.0.1-0ubuntu17.4 Architecture: i386 DKMSKernelVersion: 3.8.0-30-generic Date: Sat Sep 21 11:53:00 2013 InstallationMedia: Ubuntu 12.04.3 LTS "Precise Pangolin" - Release i386 (20130820.1) MarkForUpload: True PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1 SourcePackage: bcmwl Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1228448/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1228380] Re: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: bcmwl (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bcmwl in Ubuntu. https://bugs.launchpad.net/bugs/1228380 Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build Status in “bcmwl” package in Ubuntu: Confirmed Bug description: wifi dont work ProblemType: Package DistroRelease: Ubuntu 12.04 Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1 ProcVersionSignature: Ubuntu 3.8.0-30.44~precise1-generic 3.8.13.6 Uname: Linux 3.8.0-30-generic i686 NonfreeKernelModules: nvidia ApportVersion: 2.0.1-0ubuntu17.4 Architecture: i386 DKMSKernelVersion: 3.8.0-30-generic Date: Fri Sep 20 16:34:46 2013 InstallationMedia: Ubuntu 12.04.3 LTS "Precise Pangolin" - Release i386 (20130820.1) MarkForUpload: True PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1 SourcePackage: bcmwl Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1228380/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1228448] Re: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build
*** This bug is a duplicate of bug 1228380 *** https://bugs.launchpad.net/bugs/1228380 Thank you for taking the time to report this crash and helping to make this software better. This particular crash has already been reported and is a duplicate of bug #1228380, so is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Please continue to report any other bugs you may find. ** Tags removed: need-duplicate-check ** This bug has been marked a duplicate of bug 1228380 bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bcmwl in Ubuntu. https://bugs.launchpad.net/bugs/1228448 Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build Status in “bcmwl” package in Ubuntu: New Bug description: I am uncertain if this is a new bug as I am not sure how to describe what has happened. I was doing a clean install of Ubuntu 12.04 and suddenly got an error message indicating there was a problem in or with "bcmwl", whatever that is. It has caused my laptop to become non respondant and I had to restart it, but as it only has half an operating system it won't work so I have gone back to Windows as I urgently need the laptop to do my university work. I may try Ubuntu again at some future date, but it won't be until such a time as I can afford to have a laptop non-functional while I try to resolve very annoying issues. Regards ProblemType: Package DistroRelease: Ubuntu 12.04 Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1 ProcVersionSignature: Ubuntu 3.8.0-29.42~precise1-generic 3.8.13.5 Uname: Linux 3.8.0-29-generic i686 ApportVersion: 2.0.1-0ubuntu17.4 Architecture: i386 DKMSKernelVersion: 3.8.0-30-generic Date: Sat Sep 21 11:53:00 2013 InstallationMedia: Ubuntu 12.04.3 LTS "Precise Pangolin" - Release i386 (20130820.1) MarkForUpload: True PackageVersion: 6.20.155.1+bdcom-0ubuntu0.0.1 SourcePackage: bcmwl Title: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu0.0.1: bcmwl kernel module failed to build UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1228448/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1201674] Re: [Hewlett-Packard 520-1138cb] suspend/resume failure [non-free: wl]
Bug still exists - after first resume the screen comes back on normaly but network is off and mouse does not respond after a few seconds the sreen flickers and goes black for a second then back on with network and mouse working and the HUD is also on. But after 2nd resume the sreen comes back on and nothing else works except for REISUB to reboot. Kernel 3.11.0-7.14 ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1201674 Title: [Hewlett-Packard 520-1138cb] suspend/resume failure [non-free: wl] Status in “linux” package in Ubuntu: Confirmed Bug description: suspend resume failure again ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.11 ProcVersionSignature: Ubuntu 3.10.0-2.11-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 NonfreeKernelModules: wl Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.10.2-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kenn 1675 F pulseaudio Date: Mon Jul 15 23:48:08 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=f60e696f-fe9d-4216-86ec-ce13930c9c34 InstallationDate: Installed on 2013-07-10 (5 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130709) InterpreterPath: /usr/bin/python3.3 MachineType: Hewlett-Packard 520-1138cb MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.10.0-2-generic root=UUID=ee63e052-abe5-4316-8499-10528ed15dd7 ro recovery nomodeset rootflags=subvol=@ PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.112 SourcePackage: linux Title: [Hewlett-Packard 520-1138cb] suspend/resume failure [non-free: wl] UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 11/23/2012 dmi.bios.vendor: AMI dmi.bios.version: 7.09 dmi.board.asset.tag: 3CR22302J0 dmi.board.name: 2ADC dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.05 dmi.chassis.asset.tag: 3CR22302J0 dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnAMI:bvr7.09:bd11/23/2012:svnHewlett-Packard:pn520-1138cb:pvr1.00:rvnPEGATRONCORPORATION:rn2ADC:rvr1.05:cvnHewlett-Packard:ct3:cvr: dmi.product.name: 520-1138cb dmi.product.version: 1.00 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1201674/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1227969] Re: linux: 3.11.0-8.15 -proposed tracker
This bug was fixed in the package linux - 3.11.0-8.15 --- linux (3.11.0-8.15) saucy; urgency=low [ Tim Gardner ] * Release tracker - LP: #1227969 * Update lttng Updated to git://git.lttng.org/lttng-modules.git 9998f5216f4641a79e158135 Version 2.3.0+ [ Upstream Kernel Changes ] * igb: Add additional get_phy_id call for i354 devices - LP: #1219619 * igb: Read flow control for i350 from correct EEPROM section - LP: #1219619 * timekeeping: Fix HRTICK related deadlock from ntp lock changes Required for lttng update. -- Tim GardnerThu, 19 Sep 2013 07:41:49 -0600 ** Changed in: linux (Ubuntu Saucy) Status: New => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1227969 Title: linux: 3.11.0-8.15 -proposed tracker Status in Kernel Development Workflow: In Progress Status in Kernel Development Workflow package-testing series: New Status in Kernel Development Workflow prepare-package series: In Progress Status in Kernel Development Workflow prepare-package-meta series: Fix Released Status in Kernel Development Workflow prepare-package-signed series: Fix Released Status in Kernel Development Workflow promote-to-release series: New Status in “linux” package in Ubuntu: Fix Released Status in “linux” source package in Saucy: Fix Released Bug description: This bug is for tracking the 3.11.0-8.15 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-Prepare-package-start:Friday, 20. September 2013 03:51 UTC kernel-phase-changed:Friday, 20. September 2013 03:51 UTC kernel-phase:Prepare To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-development-workflow/+bug/1227969/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1063474] Re: System fails to connect to iHOS-104 DVD drive with nvidia MCP61 chipset.
I can confirm the bug still exists under 3.11.0-7.14 uanwatchtv@teevee:~$ uname -a Linux teevee 3.11.0-7-generic #14-Ubuntu SMP Mon Sep 16 18:37:27 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux watchtv@teevee:~$ dmesg|grep ata5 [1.082883] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23 [1.552031] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [1.560117] ata5.00: ATAPI: ATAPI iHOS104, WL0G, max UDMA/100 [1.576138] ata5.00: configured for UDMA/100 [6.576040] ata5.00: qc timeout (cmd 0xa0) [6.576047] ata5.00: TEST_UNIT_READY failed (err_mask=0x4) [7.044052] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [7.068123] ata5.00: configured for UDMA/100 [ 29.856044] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 29.856065] ata5.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in [ 29.856067] ata5.00: status: { DRDY } [ 29.856075] ata5: hard resetting link [ 29.856077] ata5: nv: skipping hardreset on occupied port [ 30.324069] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 30.348329] ata5.00: configured for UDMA/100 [ 35.348031] ata5.00: qc timeout (cmd 0xa0) [ 35.348038] ata5.00: TEST_UNIT_READY failed (err_mask=0x4) [ 35.348044] ata5: hard resetting link [ 35.348046] ata5: nv: skipping hardreset on occupied port [ 35.816055] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 35.840125] ata5.00: configured for UDMA/100 [ 40.840027] ata5.00: qc timeout (cmd 0xa0) [ 40.840034] ata5.00: TEST_UNIT_READY failed (err_mask=0x4) [ 40.840038] ata5: limiting SATA link speed to 1.5 Gbps [ 40.840040] ata5.00: limiting speed to UDMA/100:PIO3 [ 40.840045] ata5: hard resetting link [ 40.840047] ata5: nv: skipping hardreset on occupied port [ 41.308037] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 41.332118] ata5.00: configured for UDMA/100 watchtv@teevee:~$ -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1063474 Title: System fails to connect to iHOS-104 DVD drive with nvidia MCP61 chipset. Status in “linux” package in Ubuntu: Incomplete Bug description: The computer fails to connect to the LG iHOS-104 DVD drive. The drive is working, as it will boot the Windows installer. I have seen similar bugs posted on the internet for the past 5 years. Here's a thread that shows the problem fixed for the MCP55 chipset. http://www.gossamer- threads.com/lists/linux/kernel/1234502?do=post_view_threaded#1234502 WORKAROUND: Use the DVD drive with a USB-SATA adapter. Upstream discussion: http://marc.info/?l=linux- ide&m=137736028900971&w=2 ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: linux-image-3.5.0-17-generic 3.5.0-17.27 ProcVersionSignature: Ubuntu 3.5.0-17.27-generic 3.5.5 Uname: Linux 3.5.0-17-generic x86_64 ApportVersion: 2.6.1-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: watchtv7366 F pulseaudio /dev/snd/controlC0: watchtv4814 F alsamixer watchtv7366 F pulseaudio CRDA: Error: [Errno 2] No such file or directory: 'iw' Date: Sun Oct 7 19:34:10 2012 HibernationDevice: RESUME=UUID=914386c4-84a9-4eb4-8382-cb6f877f7ef6 IwConfig: eth0 no wireless extensions. lono wireless extensions. Lsusb: Bus 002 Device 006: ID 046d:c047 Logitech, Inc. Laser Mouse Bus 002 Device 005: ID 0e8f:0021 GreenAsia Inc. Multimedia Keyboard Controller Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: Gigabyte Technology Co., Ltd. M68M-S2P ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=81823799-2b15-4236-887b-e3497f3f6a46 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.5.0-17-generic N/A linux-backports-modules-3.5.0-17-generic N/A linux-firmware1.94 RfKill: SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) WifiSyslog: dmi.bios.date: 07/15/2010 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: FCb dmi.board.name: M68M-S2P dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrFCb:bd07/15/2010:svnGigabyteTechnologyCo.,Ltd.:pnM68M-S2P:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnM68M-S2P:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: M68M-S2P dmi.sys.vendor: Gigabyte Technology Co., Ltd. --- ApportVersion: 2.12-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPI
[Kernel-packages] [Bug 1228413] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1228413 Title: package linux-image-3.8.0-31-generic 3.8.0-31.46 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2 Status in “linux” package in Ubuntu: Confirmed Bug description: Shows up after logging in after reboot/start. ProblemType: Package DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-31-generic 3.8.0-31.46 ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8 Uname: Linux 3.8.0-31-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.9.2-0ubuntu8.4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: voitek 3084 F pulseaudio /dev/snd/controlC0: voitek 3084 F pulseaudio /dev/snd/seq:timidity 2936 F timidity CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. Date: Fri Sep 20 16:07:21 2013 DuplicateSignature: package:linux-image-3.8.0-31-generic:3.8.0-31.46:subprocess installed post-installation script returned error exit status 2 ErrorMessage: subprocess installed post-installation script returned error exit status 2 IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: System manufacturer System Product Name MarkForUpload: True ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-31-generic root=UUID=1ea7ea03-95f5-4f1c-8243-62fb6a3db8e3 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: grub-pc 2.00-13ubuntu3 RfKill: SourcePackage: linux Title: package linux-image-3.8.0-31-generic 3.8.0-31.46 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2 UpgradeStatus: Upgraded to raring on 2013-04-19 (153 days ago) dmi.bios.date: 07/22/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1604 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: P7H55D-M EVO dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1604:bd07/22/2010:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP7H55D-MEVO:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1228413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1228413] Re: package linux-image-3.8.0-31-generic 3.8.0-31.46 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1228413 Title: package linux-image-3.8.0-31-generic 3.8.0-31.46 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2 Status in “linux” package in Ubuntu: New Bug description: Shows up after logging in after reboot/start. ProblemType: Package DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-31-generic 3.8.0-31.46 ProcVersionSignature: Ubuntu 3.8.0-31.46-generic 3.8.13.8 Uname: Linux 3.8.0-31-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.9.2-0ubuntu8.4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: voitek 3084 F pulseaudio /dev/snd/controlC0: voitek 3084 F pulseaudio /dev/snd/seq:timidity 2936 F timidity CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. Date: Fri Sep 20 16:07:21 2013 DuplicateSignature: package:linux-image-3.8.0-31-generic:3.8.0-31.46:subprocess installed post-installation script returned error exit status 2 ErrorMessage: subprocess installed post-installation script returned error exit status 2 IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: System manufacturer System Product Name MarkForUpload: True ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-31-generic root=UUID=1ea7ea03-95f5-4f1c-8243-62fb6a3db8e3 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: grub-pc 2.00-13ubuntu3 RfKill: SourcePackage: linux Title: package linux-image-3.8.0-31-generic 3.8.0-31.46 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2 UpgradeStatus: Upgraded to raring on 2013-04-19 (153 days ago) dmi.bios.date: 07/22/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1604 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: P7H55D-M EVO dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1604:bd07/22/2010:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP7H55D-MEVO:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1228413/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1063474] Re: System fails to connect to iHOS-104 DVD drive with nvidia MCP61 chipset.
I use the Lite-on "SmartPack" utility to update the firmware. It can be found here: http://www.liteonit.eu/eu/DOWNLOADS/utilities/SmartPackSetup1.22.0.exe.zip -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1063474 Title: System fails to connect to iHOS-104 DVD drive with nvidia MCP61 chipset. Status in “linux” package in Ubuntu: Confirmed Bug description: The computer fails to connect to the LG iHOS-104 DVD drive. The drive is working, as it will boot the Windows installer. I have seen similar bugs posted on the internet for the past 5 years. Here's a thread that shows the problem fixed for the MCP55 chipset. http://www.gossamer- threads.com/lists/linux/kernel/1234502?do=post_view_threaded#1234502 WORKAROUND: Use the DVD drive with a USB-SATA adapter. Upstream discussion: http://marc.info/?l=linux- ide&m=137736028900971&w=2 ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: linux-image-3.5.0-17-generic 3.5.0-17.27 ProcVersionSignature: Ubuntu 3.5.0-17.27-generic 3.5.5 Uname: Linux 3.5.0-17-generic x86_64 ApportVersion: 2.6.1-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: watchtv7366 F pulseaudio /dev/snd/controlC0: watchtv4814 F alsamixer watchtv7366 F pulseaudio CRDA: Error: [Errno 2] No such file or directory: 'iw' Date: Sun Oct 7 19:34:10 2012 HibernationDevice: RESUME=UUID=914386c4-84a9-4eb4-8382-cb6f877f7ef6 IwConfig: eth0 no wireless extensions. lono wireless extensions. Lsusb: Bus 002 Device 006: ID 046d:c047 Logitech, Inc. Laser Mouse Bus 002 Device 005: ID 0e8f:0021 GreenAsia Inc. Multimedia Keyboard Controller Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: Gigabyte Technology Co., Ltd. M68M-S2P ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=81823799-2b15-4236-887b-e3497f3f6a46 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.5.0-17-generic N/A linux-backports-modules-3.5.0-17-generic N/A linux-firmware1.94 RfKill: SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) WifiSyslog: dmi.bios.date: 07/15/2010 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: FCb dmi.board.name: M68M-S2P dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrFCb:bd07/15/2010:svnGigabyteTechnologyCo.,Ltd.:pnM68M-S2P:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnM68M-S2P:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: M68M-S2P dmi.sys.vendor: Gigabyte Technology Co., Ltd. --- ApportVersion: 2.12-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: watchtv1305 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CurrentDmesg: [ 55.165828] pool[1480]: segfault at 40 ip 7f3d05544f87 sp 7f3d03653c50 error 4 in tumbler-gst-thumbnailer.so[7f3d05542000+4000] [ 707.285402] python[6778]: segfault at 0 ip 7eff23bde2f7 sp 7fffeba941f8 error 4 in libgtk-3.so.0.800.2[7eff23ade000+4c5000] DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=914386c4-84a9-4eb4-8382-cb6f877f7ef6 IwConfig: eth0 no wireless extensions. lono wireless extensions. Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 003: ID 0e8f:0021 GreenAsia Inc. Multimedia Keyboard Controller Bus 002 Device 002: ID 045e:0719 Microsoft Corp. Xbox 360 Wireless Adapter Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: Gigabyte Technology Co., Ltd. M68M-S2P MarkForUpload: True Package: linux (not installed) ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.10.0-6-generic root=UUID=e276cadb-f115-40c5-abe4-2471badc3113 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.10.0-6.17-generic 3.10.3 RelatedPackageVersions: linux-restricted-modules-3.10.0-6-generic N/A linux-backports-modules-3.10.0-6-generic N/A linux-firmware1.113 RfKill: Tags: saucy Uname: Linux 3.10.0-6-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 08/25/2010 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: FC dmi.board.name: M68M-S2P dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.vers
[Kernel-packages] [Bug 1174105] Re: Please enable CONFIG_USB_UAS in kernel config
** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1174105 Title: Please enable CONFIG_USB_UAS in kernel config Status in “linux” package in Ubuntu: Confirmed Bug description: CONFIG_USB_UAS enables UAS (USB Attached SCSI), which is a new(ish) specification that is more efficient than USB Storage Bulk-Only Transfer. A number of newer drive enclosures and adapters that support USB 3.0 support UAS(P) (e.g. ASM1053E and ASM1051E chipsets). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1174105/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1212041] Re: suspend/resume failure, Dell Inspiron 530
Still happens with latest kernel. I will note (anecdotally) that it seems to be substantially more likely if I've done something like a compile to make the system run hot just before I suspend. ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1212041 Title: suspend/resume failure, Dell Inspiron 530 Status in “linux” package in Ubuntu: Confirmed Bug description: Suspend appeard to work fine. Resume came back, monitor backlight turned on and disk spun a bit, but no visible graphics or reaction to input. Had to alt+sysrq+reisub to force a reboot. This is a regression since the update to kernel 3.11.0 a few days ago. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-2-generic 3.11.0-2.5 ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5 Uname: Linux 3.11.0-2-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12-0ubuntu3 Architecture: amd64 Date: Tue Aug 13 20:15:07 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume InstallationDate: Installed on 2011-09-24 (689 days ago) InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Beta amd64 (20110921.2) InterpreterPath: /usr/bin/python3.3 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-2-generic root=UUID=60269649-642d-4672-83bb-7bfadaae6e31 ro quiet splash vt.handoff=7 SourcePackage: linux Title: suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-06-08 (66 days ago) UserGroups: dmi.bios.date: 06/20/2008 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.0.15 dmi.board.name: 0FM586 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: OEM dmi.modalias: dmi:bvnDellInc.:bvr1.0.15:bd06/20/2008:svnDellInc.:pnInspiron530:pvr:rvnDellInc.:rn0FM586:rvr:cvnDellInc.:ct3:cvrOEM: dmi.product.name: Inspiron 530 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1212041/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1222017] Re: [Asus SABERTOOTH 990FX R2.0] UEFI GRUB Fails After 13.10 Beta1 Installation
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1222017 Title: [Asus SABERTOOTH 990FX R2.0] UEFI GRUB Fails After 13.10 Beta1 Installation Status in “linux” package in Ubuntu: Incomplete Bug description: Hi, I installed Kubuntu 13.10 64Bit Beta1 from DVD. Installation successfully completes, but after I remove the DVD and reboot I get a GRUB prompt and no OS ? Seems like UEFI GRUB install did not work properly. My motherboard is an Asus Sabertooth 990FX Gen2.0 AMD with UEFI and Secure Boot. The Kubuntu UEFI hard drive is properly listed in the motherboard's BIOS. I don't know how to proceed, please instruct...JeZ+Lee WORKAROUND: Turn off "UEFI" and "Secure Boot" in BIOS. --- ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kubuntu6136 F pulseaudio /dev/snd/controlC1: kubuntu6136 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.331 DistroRelease: Ubuntu 13.04 IwConfig: eth0 no wireless extensions. eth1 no wireless extensions. lono wireless extensions. LiveMediaBuild: Kubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MachineType: To be filled by O.E.M. To be filled by O.E.M. MarkForUpload: True Package: linux (not installed) ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/username.seed boot=casper maybe-ubiquity quiet splash -- ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 RfKill: Tags: raring Uname: Linux 3.8.0-19-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 01/11/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1503 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: SABERTOOTH 990FX R2.0 dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1503:bd01/11/2013:svnTobefilledbyO.E.M.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnASUSTeKCOMPUTERINC.:rnSABERTOOTH990FXR2.0:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To be filled by O.E.M. dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: To be filled by O.E.M. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222017/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1174105] Re: Please enable CONFIG_USB_UAS in kernel config
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1174105 Title: Please enable CONFIG_USB_UAS in kernel config Status in “linux” package in Ubuntu: Incomplete Bug description: CONFIG_USB_UAS enables UAS (USB Attached SCSI), which is a new(ish) specification that is more efficient than USB Storage Bulk-Only Transfer. A number of newer drive enclosures and adapters that support USB 3.0 support UAS(P) (e.g. ASM1053E and ASM1051E chipsets). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1174105/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1218625] Re: samsung galaxy ace i (gt-s5830i) not plus detected after upgrade.
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1218625 Title: samsung galaxy ace i (gt-s5830i) not plus detected after upgrade. Status in “linux” package in Ubuntu: Incomplete Bug description: I've saucy on my netbook since the repositories for it were published (I use it for every dev branches of ubuntu). So I upgrade this installation every day. Before the 28th August 2013 (utc +1 timezone) I can use my device as storage device or debug, and I've had the notifications on both pc and smartphone. Now if I plugin my gt-s5830i I don't get any notifications on both device, but where dmesg displays the usb connection lsusb doesn't give the phone on the list. The smartphone runs cyanogenmod 7 (android 2.3.7). With a tablet everything is still ok. So a kiwie 7 tab (detected as simply google on lsusb) is still working, android 4.0.1. This is my pc as uname -a sees it: "Linux spf-laptop 3.11.0-4-generic #9-Ubuntu SMP Mon Aug 26 15:22:48 UTC 2013 i686 i686 i686 GNU/Linux" . I usually use the 3.10.0-5-lowlatency that used to work too, but now as the latest it doesn't work. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-4-generic 3.11.0-4.9 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic i686 ApportVersion: 2.12.1-0ubuntu2 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: spf3658 F pulseaudio Date: Thu Aug 29 23:14:35 2013 HibernationDevice: RESUME=UUID=ebbfa61f-aeb2-4af6-9b6a-37d97c91a113 InstallationDate: Installed on 2012-11-10 (292 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release i386 (20121017.2) MachineType: ASUSTeK Computer INC. 1001PX MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic root=UUID=14c0d5bf-f93d-46b7-b890-da6ed3a078e7 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-4-generic N/A linux-backports-modules-3.11.0-4-generic N/A linux-firmware1.113 SourcePackage: linux StagingDrivers: zram UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/12/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0904 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: 1001PX dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: x.xx dmi.chassis.asset.tag: 0x dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK Computer INC. dmi.chassis.version: x.x dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0904:bd08/12/2010:svnASUSTeKComputerINC.:pn1001PX:pvrx.x:rvnASUSTeKComputerINC.:rn1001PX:rvrx.xx:cvnASUSTeKComputerINC.:ct10:cvrx.x: dmi.product.name: 1001PX dmi.product.version: x.x dmi.sys.vendor: ASUSTeK Computer INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1218625/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 788540] Re: [Thinkpad T410s] Mute indicator gets out of sync
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/788540 Title: [Thinkpad T410s] Mute indicator gets out of sync Status in “linux” package in Ubuntu: Incomplete Bug description: The Thinkpad T410s has an indicator led on the mute button and one on the microphone mute button. If I only use the hardware mute key everything works fine, but when I use indicator-sound or pavucontrol the LED won't switch off and the indicator gets out of sync. Mute in /proc/acpi/ibm/volume follows the hardware key and also doesn't switch when I use pavucotrol or indicator-sound. Version: Ubuntu 2.6.38-9.43-generic 2.6.38.4 --- ApportVersion: 2.12-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 2766 F pulseaudio ubuntu 4631 F pulseaudio CasperVersion: 1.336 DistroRelease: Ubuntu 13.10 LiveMediaBuild: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130818) MachineType: LENOVO 29249JG MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5 RelatedPackageVersions: linux-restricted-modules-3.11.0-2-generic N/A linux-backports-modules-3.11.0-2-generic N/A linux-firmware1.113 Tags: saucy Uname: Linux 3.11.0-2-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 07/13/2011 dmi.bios.vendor: LENOVO dmi.bios.version: 6UET67WW (1.47 ) dmi.board.name: 29249JG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6UET67WW(1.47):bd07/13/2011:svnLENOVO:pn29249JG:pvrThinkPadT410s:rvnLENOVO:rn29249JG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 29249JG dmi.product.version: ThinkPad T410s dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/788540/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1201674] Re: [Hewlett-Packard 520-1138cb] suspend/resume failure [non-free: wl]
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1201674 Title: [Hewlett-Packard 520-1138cb] suspend/resume failure [non-free: wl] Status in “linux” package in Ubuntu: Incomplete Bug description: suspend resume failure again ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.11 ProcVersionSignature: Ubuntu 3.10.0-2.11-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 NonfreeKernelModules: wl Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.10.2-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kenn 1675 F pulseaudio Date: Mon Jul 15 23:48:08 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=f60e696f-fe9d-4216-86ec-ce13930c9c34 InstallationDate: Installed on 2013-07-10 (5 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130709) InterpreterPath: /usr/bin/python3.3 MachineType: Hewlett-Packard 520-1138cb MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.10.0-2-generic root=UUID=ee63e052-abe5-4316-8499-10528ed15dd7 ro recovery nomodeset rootflags=subvol=@ PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.112 SourcePackage: linux Title: [Hewlett-Packard 520-1138cb] suspend/resume failure [non-free: wl] UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 11/23/2012 dmi.bios.vendor: AMI dmi.bios.version: 7.09 dmi.board.asset.tag: 3CR22302J0 dmi.board.name: 2ADC dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.05 dmi.chassis.asset.tag: 3CR22302J0 dmi.chassis.type: 3 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnAMI:bvr7.09:bd11/23/2012:svnHewlett-Packard:pn520-1138cb:pvr1.00:rvnPEGATRONCORPORATION:rn2ADC:rvr1.05:cvnHewlett-Packard:ct3:cvr: dmi.product.name: 520-1138cb dmi.product.version: 1.00 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1201674/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1221790] Re: Screen brightness is maximum upon fresh boot
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1221790 Title: Screen brightness is maximum upon fresh boot Status in “linux” package in Ubuntu: Incomplete Bug description: Hello, Trouble: Everytime I restart or cold boot my Thinkpad X1 laptop, my screen brightness is set to maximum. Expected Behaviour: Brighteness setting is retained between reboots My laptop uses UEFI. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-4-generic 3.11.0-4.9 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic x86_64 ApportVersion: 2.12.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: anmar 1798 F pulseaudio Date: Fri Sep 6 11:20:05 2013 HibernationDevice: RESUME=UUID=2e39ee55-2a87-4298-a2d0-1c8ef5de5a96 InstallationDate: Installed on 2013-08-09 (27 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130809) MachineType: LENOVO 3443CTO MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic.efi.signed root=UUID=1784df7c-8b5f-4550-84f2-13e73c2915fe ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-4-generic N/A linux-backports-modules-3.11.0-4-generic N/A linux-firmware1.113 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/29/2013 dmi.bios.vendor: LENOVO dmi.bios.version: G6ET96WW (2.56 ) dmi.board.asset.tag: Not Available dmi.board.name: 3443CTO dmi.board.vendor: LENOVO dmi.board.version: Win8 STD DPK TPG dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG6ET96WW(2.56):bd04/29/2013:svnLENOVO:pn3443CTO:pvrThinkPadX1Carbon:rvnLENOVO:rn3443CTO:rvrWin8STDDPKTPG:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 3443CTO dmi.product.version: ThinkPad X1 Carbon dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1221790/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1193649] Re: package linux-image-3.9.0-6-generic 3.9.0-6.14 failed to install/upgrade: subprocess installed post-installation script returned error exit status 17
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1193649 Title: package linux-image-3.9.0-6-generic 3.9.0-6.14 failed to install/upgrade: subprocess installed post-installation script returned error exit status 17 Status in “linux” package in Ubuntu: Incomplete Bug description: The image file /boot/initrd.img-3.9.0-6-generic does not exist. So the attempt to make a symbolic link to it from /initrd.img obviously failed. ProblemType: Package DistroRelease: Ubuntu 13.10 Package: linux-image-3.9.0-6-generic 3.9.0-6.14 ProcVersionSignature: Ubuntu 3.9.0-4.9-generic 3.9.4 Uname: Linux 3.9.0-4-generic i686 ApportVersion: 2.10.2-0ubuntu2 AptOrdering: linux-image-3.9.0-6-generic: Configure linux-image-extra-3.9.0-6-generic: Configure Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: emartin1656 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. Date: Sat Jun 22 11:24:41 2013 DuplicateSignature: package:linux-image-3.9.0-6-generic:3.9.0-6.14:subprocess installed post-installation script returned error exit status 17 ErrorMessage: subprocess installed post-installation script returned error exit status 17 HibernationDevice: RESUME=UUID=1397c974-873e-4a47-9515-bd60184e2997 InstallationDate: Installed on 2013-06-12 (9 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130612) IwConfig: lono wireless extensions. eth0 no wireless extensions. Lsusb: Bus 002 Device 002: ID 80ee:0021 VirtualBox USB Tablet Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: innotek GmbH VirtualBox MarkForUpload: True ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.9.0-4-generic root=UUID=3b8276e9-03bb-4f44-82b4-f0434292ffba ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: grub-pc 2.00-14ubuntu1 RfKill: SourcePackage: linux Title: package linux-image-3.9.0-6-generic 3.9.0-6.14 failed to install/upgrade: subprocess installed post-installation script returned error exit status 17 UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/01/2006 dmi.bios.vendor: innotek GmbH dmi.bios.version: VirtualBox dmi.board.name: VirtualBox dmi.board.vendor: Oracle Corporation dmi.board.version: 1.2 dmi.chassis.type: 1 dmi.chassis.vendor: Oracle Corporation dmi.modalias: dmi:bvninnotekGmbH:bvrVirtualBox:bd12/01/2006:svninnotekGmbH:pnVirtualBox:pvr1.2:rvnOracleCorporation:rnVirtualBox:rvr1.2:cvnOracleCorporation:ct1:cvr: dmi.product.name: VirtualBox dmi.product.version: 1.2 dmi.sys.vendor: innotek GmbH To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1193649/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1217685] Re: [Acer Extensa 5220] suspend/resume failure
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1217685 Title: [Acer Extensa 5220] suspend/resume failure Status in “linux” package in Ubuntu: Incomplete Bug description: crashreport appers after todays dist-upgrade and reboot after login ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-3-generic (not installed) ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: thomas 1814 F pulseaudio CurrentDmesg: [7.133109] tg3 :02:00.0 eth0: Flow control is on for TX and on for RX [7.19] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Date: Tue Aug 20 17:13:12 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=dceef174-e6ec-4cf6-8d1e-c66678c0613d InstallationDate: Installed on 2013-08-05 (22 days ago) InstallationMedia: Ubuntu-GNOME 13.04 "Raring Ringtail" - Release amd64 (20130424) InterpreterPath: /usr/bin/python3.3 MachineType: Acer Extensa 5220 MarkForUpload: True PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb 1 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic root=UUID=8aaa2853-f3ae-4d78-8bf8-b357e637faf8 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.11.0-4-generic N/A linux-backports-modules-3.11.0-4-generic N/A linux-firmware1.113 SourcePackage: linux Title: [Acer Extensa 5220] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-08-07 (20 days ago) UserGroups: dmi.bios.date: 07/03/2008 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: V1.35 dmi.board.name: Columbia dmi.board.vendor: Acer dmi.board.version: Rev dmi.chassis.asset.tag: None dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvrV1.35:bd07/03/2008:svnAcer:pnExtensa5220:pvr0100:rvnAcer:rnColumbia:rvrRev:cvnAcer:ct10:cvrN/A: dmi.product.name: Extensa 5220 dmi.product.version: 0100 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1217685/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1219182] Re: [Tyan S2865] udev timeout: 12.04.2 Apparently successful install; First Boot, Fail
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1219182 Title: [Tyan S2865] udev timeout: 12.04.2 Apparently successful install; First Boot, Fail Status in “linux” package in Ubuntu: Incomplete Bug description: I've done an install of 12.04 to a Tyan S2865 with grub on USB and root & swap on an encrypted raided pair of HD's. On first boot I do not reach the decrypt window. I get an Ubuntu splash screen with the half dozen dots running left to right, changing from red to white (I think that's the color); but they keep doing that indefinitely. When I do Ctl-Alt-F1 I find the following. udev[95]: timeout: killing: '/sbin/modprobe -bv usb:v04D9p1603d0310dc00dsc00dp00ic03isc00ip00' [260] udev[96]: timeout: killing: '/sbin/modprobe -bv hid:b0003g0001v046DpC404' [261] udev[100]: timeout: killing: '/sbin/modprobe -bv pci:v10DEd0053sv10F1sd2865bc01sc01 i8a' [145] udev[102]: timeout: killing: '/sbin/modprobe -bv pci:v10DEd0053sv10F1sd2865bc01sc01 i85' [146] udev[95]: timeout: killing: '/sbin/modprobe -bv usb:v04D9p1603d0310dc00dsc00dp00ic03isc00ip01' [259] udev[95]: timeout: killing: '/sbin/modprobe -bv usb:v04D9p1603d0310dc00dsc00dp00ic03isc00ip00' [260] udev[96]: timeout: killing: '/sbin/modprobe -bv hid:b0003g0001v046DpC404' [261] udevadm settle - timeout of 120 seconds reached, the event queue contains: /sys/devices/pc9:00/:00:06.0 (1011) /sys/devices/pc9:00/:00:07.0 (1012) etc... [The rest of the "event queue" can be seen in this picture of my screen: https://www.dropbox.com/s/atkm50smwsugri6/Tyan%20S2865%20Failure.jpg] Since I can't boot into the machine, I don't know how to give any more information (and I certainly can't run ubuntu-bug). I would be happy to provide whatever I can. --- ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperVersion: 1.336 DistroRelease: Ubuntu 13.10 IwConfig: eth0 no wireless extensions. eth1 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130827) MachineType: TYAN Computer Corp S2865 MarkForUpload: True Package: linux (not installed) ProcFB: 0 nouveaufb ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 RelatedPackageVersions: linux-restricted-modules-3.11.0-4-generic N/A linux-backports-modules-3.11.0-4-generic N/A linux-firmware1.113 RfKill: Tags: saucy Uname: Linux 3.11.0-4-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 11/14/2006 dmi.bios.vendor: Phoenix Technologies, LTD dmi.bios.version: 6.00 PG dmi.board.name: NF-CK804 dmi.chassis.type: 3 dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd11/14/2006:svnTYANComputerCorp:pnS2865:pvr:rvn:rnNF-CK804:rvr:cvn:ct3:cvr: dmi.product.name: S2865 dmi.sys.vendor: TYAN Computer Corp To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1219182/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1205612] Re: package linux-image-3.10.0-5-generic 3.10.0-5.15 failed to install/upgrade: subprocess installed post-installation script returned error exit status 17
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1205612 Title: package linux-image-3.10.0-5-generic 3.10.0-5.15 failed to install/upgrade: subprocess installed post-installation script returned error exit status 17 Status in “linux” package in Ubuntu: Incomplete Bug description: Downloaded Live-image of alpha 2 of Ubuntu Gnome Edition. Run it from usb. Then upgraded using: $sudo apt-get dist-upgrade And then got those errors stating that linux-image failed to install. ProblemType: Package DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-5-generic 3.10.0-5.15 ProcVersionSignature: Ubuntu 3.10.0-5.14-generic 3.10.2 Uname: Linux 3.10.0-5-generic x86_64 ApportVersion: 2.11-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu-gnome 11733 F pulseaudio CasperVersion: 1.335 CurrentDmesg: [ 29.380973] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.876285] hp_wmi: Unknown event_id - 0 - 0x0 [ 32.265456] tg3 :02:01.0 eth0: Link is up at 1000 Mbps, full duplex [ 32.265475] tg3 :02:01.0 eth0: Flow control is on for TX and on for RX [ 32.265510] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Date: Sat Jul 27 10:27:09 2013 DuplicateSignature: package:linux-image-3.10.0-5-generic:3.10.0-5.15:subprocess installed post-installation script returned error exit status 17 ErrorMessage: subprocess installed post-installation script returned error exit status 17 IwConfig: eth0 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu-GNOME 13.10 "Saucy Salamander" - Alpha amd64 (20130724) MachineType: Hewlett-Packard HP Compaq nx6325 (EY349EA#AKD) MarkForUpload: True PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcFB: 0 radeondrmfb ProcKernelCmdLine: initrd=/ubninit file=/cdrom/preseed/hostname.seed boot=casper quiet splash -- BOOT_IMAGE=/ubnkern PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: grub-pc 2.00-15ubuntu2 SourcePackage: linux Title: package linux-image-3.10.0-5-generic 3.10.0-5.15 failed to install/upgrade: subprocess installed post-installation script returned error exit status 17 UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/08/2007 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68TT2 Ver. F.07 dmi.board.name: 30B0 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 40.15 dmi.chassis.asset.tag: CNU7110B09 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68TT2Ver.F.07:bd05/08/2007:svnHewlett-Packard:pnHPCompaqnx6325(EY349EA#AKD):pvrF.07:rvnHewlett-Packard:rn30B0:rvrKBCVersion40.15:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP Compaq nx6325 (EY349EA#AKD) dmi.product.version: F.07 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1205612/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1170150] Re: vmlinuz/initrd.img symlinks do not point to signed versions on kernel updates of secure boot UEFI machines
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1170150 Title: vmlinuz/initrd.img symlinks do not point to signed versions on kernel updates of secure boot UEFI machines Status in “linux” package in Ubuntu: Incomplete Status in “linux” source package in Raring: Won't Fix Status in “linux” source package in Saucy: Incomplete Bug description: Kernel updates on a UEFI pc with secure boot enabled have the vmlinuz and initrd.img symlinks updated, but they point to the unsigned versions of the kernel instead of the signed ones. The pc was set up with secure boot on, has never been booted with secure boot off, and no runtime problems have been noted from the wrong symlinks. Having the links to the signed versions is highly desirable, in order to set up a USB stick with its own EFI directory to boot Ubuntu, and not have to worry about changing the USB stick's grub.cfg files. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1170150/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1009312] Re: 10de:0426 GPU loads unreliably, possible kernel timeout
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1009312 Title: 10de:0426 GPU loads unreliably, possible kernel timeout Status in “linux” package in Ubuntu: Incomplete Bug description: Reverse upstream kernel commit bisecting revealed a fix via commit d34883d4e35c0a994e91dd847a82b4c9e0c31d83 by Xiao Guangrong. WORKAROUND: If I boot my computer from battery power alone without AC, my GPU & the Ubuntu splash screen load on startup. I've been running Ubuntu 12.04 for a few weeks now, I really like it, but from the beginning, I had the issue where the proprietary nvidia driver installs but fails to load (confirmed from the commandline, jockey, and the nvidia-dashboard). Over time, I've noticed that sometimes when I power on, the driver does load and I can enter a full unity session without problems, but other times, I fall back onto the VESA driver and a unity 2d session. On a whim, I finally copied logs from both successful and unsuccessful boots, cut out the times, ran a diff on them, and noticed a pattern in the kernel messages. I'm filing this bug after a successful boot so I've also attached copies of dmesg, Xorg, & jockey logs from an unsuccessful boot. The first thing I saw in the logs was a timing discrepancy between the two boots, most of which is due to GPE storms. I've checked other logs and there's not a clear relation, I've had successful boots with them and unsuccessful ones without them. I do still wonder if they may be involved because it seems I'm a little luckier if I turn off and unplug any peripherals before booting. But around line 325 in my dmesg logs, at the last step that mentions my GPU (pci device :01:00.0), there is consistently at most a 6 ms delay for successful boots, but a 30 ms one for unsuccessful ones. Also, on all dmesg logs from successful boots, around line 610, the message "Boot video device" is recorded for the PCI number of my GPU, but for every fallback, the message never appears. That's why I'm thinking it's a kernel issue because the earliest mention of a specific driver module doesn't occur until later in the log. I'm currently using fully updated versions of nvidia driver 295.49. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-24-generic-pae 3.2.0-24.39 ProcVersionSignature: Ubuntu 3.2.0-24.39-generic-pae 3.2.16 Uname: Linux 3.2.0-24-generic-pae i686 NonfreeKernelModules: nvidia AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu8 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kyle 1790 F pulseaudio Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xfc40 irq 48' Mixer name : 'SigmaTel STAC9872AK' Components : 'HDA:83847662,104d1c00,00100201 HDA:14f12c06,104d1700,0010' Controls : 18 Simple ctrls : 9 Date: Tue Jun 5 22:44:22 2012 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=1b676222-44c7-453c-a522-06b6fd5d66f4 InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release i386 (20120423) MachineType: Sony Corporation VGN-FZ260E PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.2.0-24-generic-pae root=UUID=e330e46a-b426-439f-8037-c1069cc693ce ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-24-generic-pae N/A linux-backports-modules-3.2.0-24-generic-pae N/A linux-firmware1.79 RfKill: 0: phy0: Wireles
[Kernel-packages] [Bug 1197491] Re: [DELL Inspiron 15z 5523] touchpad not recognised
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197491 Title: [DELL Inspiron 15z 5523] touchpad not recognised Status in “linux” package in Ubuntu: Incomplete Bug description: Both in Ubuntu 12.04 and 13.04 touchpad is not recognised on DELL inspiron 15z 5523. The output of xinput is PS/2 generic mouse. The touchpad is not working at all. Except sometimes the cursor moves randomly. In Precise, after a cold boot, the touchpad works only after enabling it by Fn key. But, after a while the touchpad stops working, and it is not possible to re-enable it by Fn key. After reboot it starts working again. --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.25. ApportVersion: 2.0.1-0ubuntu17.3 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jack-stable 1807 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xf7a1 irq 47' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:111d76e0,1028058f,00100303 HDA:80862806,80860101,0010' Controls : 23 Simple ctrls : 10 DistroRelease: Ubuntu 12.04 HibernationDevice: RESUME=UUID=ec4d058c-8f1a-4bb2-b425-6aeb3fa0f6f5 InstallationMedia: Ubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64 (20130213) MachineType: Dell Inc. Inspiron 5523 MarkForUpload: True NonfreeKernelModules: wl Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-34-generic root=UUID=bd5ed224-ed7b-401b-88a8-2c55f4cda06b ro acpi_backlight=vendor dell_laptop.backlight=0 quiet splash ProcVersionSignature: Ubuntu 3.5.0-34.55~precise1-generic 3.5.7.13 RelatedPackageVersions: linux-restricted-modules-3.5.0-34-generic N/A linux-backports-modules-3.5.0-34-generic N/A linux-firmware1.79.4 StagingDrivers: rts5139 Tags: precise running-unity staging Uname: Linux 3.5.0-34-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 01/29/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A03 dmi.board.name: 0G9PXN dmi.board.vendor: Dell Inc. dmi.board.version: A03 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: Not Specified dmi.modalias: dmi:bvnDellInc.:bvrA03:bd01/29/2013:svnDellInc.:pnInspiron5523:pvrNotSpecified:rvnDellInc.:rn0G9PXN:rvrA03:cvnDellInc.:ct8:cvrNotSpecified: dmi.product.name: Inspiron 5523 dmi.product.version: Not Specified dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1197491/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1214059] Re: Wifi and bluetooth disabled at boot and hard to re-enable
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1214059 Title: Wifi and bluetooth disabled at boot and hard to re-enable Status in “linux” package in Ubuntu: Incomplete Bug description: Network Manager says either "Device not ready" or "wireless is disabled by hardware switch" (it depends). Enabling Bluetooth in the control-center just enable it for like half a second and then it's switched off again. I have a combined hardware button for both Wifi and Bluetooth, it's red when it's disabled and blue when enabled. In this case it stays red even when I repeatedly press it (though the Bluetooth setting panel reliably indicate when it is hardware disabled, so I guess the color is only related to software lock). I manage to make it work again after playing with "rfkill [block|unblock] all" and messing around with network manager (disabling network and then re-enabling it...). I usually need around 5 minutes to make it work. I did not have this problem on Raring. I had it on saucy with the 3.10 kernel but it seems to be worse with 3.11 (I need to mess around for more time in order to make it work again). Feel free to ask if you need any additional test. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-2-generic 3.11.0-2.5 ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5 Uname: Linux 3.11.0-2-generic x86_64 ApportVersion: 2.12-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: nicolas1670 F pulseaudio /dev/snd/controlC0: nicolas1670 F pulseaudio Date: Mon Aug 19 19:20:56 2013 HibernationDevice: RESUME=UUID=7e493485-d08d-4944-8362-444f69fd1e08 InstallationDate: Installed on 2013-07-10 (39 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130710) MachineType: Hewlett-Packard HP EliteBook 8530p MarkForUpload: True PccardctlStatus: Socket 0: 3.3V 16-bit PC Card Subdevice 0 (function 0) bound to driver "pata_pcmcia" ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-2-generic root=UUID=821ce4aa-35e4-436c-93cc-c8c2d9aba532 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-2-generic N/A linux-backports-modules-3.11.0-2-generic N/A linux-firmware1.113 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/08/2009 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68PDV Ver. F.11 dmi.board.name: 30E7 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 90.26 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68PDVVer.F.11:bd12/08/2009:svnHewlett-Packard:pnHPEliteBook8530p:pvrF.11:rvnHewlett-Packard:rn30E7:rvrKBCVersion90.26:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP EliteBook 8530p dmi.product.version: F.11 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1214059/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1199935] Re: [System76, Inc. Gazelle Professional] suspend/resume failure
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1199935 Title: [System76, Inc. Gazelle Professional] suspend/resume failure Status in “linux” package in Ubuntu: Incomplete Bug description: Just closed the lid, when I reopened it I found that it had booted to a fresh lightdm login screen rather than having woken from suspend properly. Also 10,000 apport dialogs opened when I first logged in. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.10 ProcVersionSignature: Ubuntu 3.10.0-2.10-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.10.2-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: robru 2148 F pulseaudio /dev/snd/pcmC0D0p: robru 2148 F...m pulseaudio Date: Tue Jul 9 18:29:34 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=a52a296f-88da-4d7f-8dda-83364796345c InstallationDate: Installed on 2012-09-14 (298 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Alpha amd64 (20120905.2) InterpreterPath: /usr/bin/python3.3 MachineType: System76, Inc. Gazelle Professional MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.10.0-2-generic root=UUID=d2cf421f-df2e-4256-98d6-3fc77444bbde ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.110 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux Title: [System76, Inc. Gazelle Professional] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-05-08 (62 days ago) UserGroups: dmi.bios.date: 05/16/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 4.6.5 dmi.board.asset.tag: Tag 12345 dmi.board.name: Gazelle Professional dmi.board.vendor: System76, Inc. dmi.board.version: gazp7 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd05/16/2012:svnSystem76,Inc.:pnGazelleProfessional:pvrgazp7:rvnSystem76,Inc.:rnGazelleProfessional:rvrgazp7:cvnNoEnclosure:ct9:cvrN/A: dmi.product.name: Gazelle Professional dmi.product.version: gazp7 dmi.sys.vendor: System76, Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1199935/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1202998] Re: Only when using kernel parameter init=/sbin/e4rat-preload kernel panics when updating libc6
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1202998 Title: Only when using kernel parameter init=/sbin/e4rat-preload kernel panics when updating libc6 Status in “linux” package in Ubuntu: Incomplete Bug description: Every time I update ubuntu 13.10 using sudo aptitude update && sudo aptitude safe-upgrade, my pc freezes with a kernel panic: trying to kill init. The error code is ff00. So far this has happened 4 or 5 times, always when installing updates. WORKAROUND: Use default kernel parameters (e.g. remove init=/sbin /e4rat-preload ). ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-3-generic 3.10.0-3.12 ProcVersionSignature: Ubuntu 3.10.0-3.12-generic 3.10.1 Uname: Linux 3.10.0-3-generic i686 ApportVersion: 2.11-0ubuntu1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: trijntje 1699 F pulseaudio Date: Fri Jul 19 11:46:13 2013 InstallationDate: Installed on 2012-11-01 (259 days ago) InstallationMedia: Ubuntu 12.10 "Quantal" - Build i386 LIVE Binary 20121018-21:07 Lsusb: Bus 001 Device 002: ID 0402:7675 ALi Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: Acer AOD257 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.10.0-3-generic root=UUID=f2496972-ed3a-4a43-a55c-4eaa002cf2be ro verbose init=/sbin/e4rat-preload RelatedPackageVersions: linux-restricted-modules-3.10.0-3-generic N/A linux-backports-modules-3.10.0-3-generic N/A linux-firmware1.112 SourcePackage: linux UpgradeStatus: Upgraded to saucy on 2013-06-15 (33 days ago) dmi.bios.date: 10/21/2011 dmi.bios.vendor: INSYDE dmi.bios.version: V1.15 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: JE06_PT dmi.board.vendor: Acer dmi.board.version: Base Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnINSYDE:bvrV1.15:bd10/21/2011:svnAcer:pnAOD257:pvrV1.15:rvnAcer:rnJE06_PT:rvrBaseBoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: AOD257 dmi.product.version: V1.15 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1202998/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1181927] Re: [Aspire V5-431]13.04: Brightness control visible but does nothing
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1181927 Title: [Aspire V5-431]13.04: Brightness control visible but does nothing Status in “linux” package in Ubuntu: Incomplete Bug description: Brightness control visible but does nothing on 13.04... The brightness up down buttons shows the overlay brightness icon going up and down but it does not change the brightness (backlight). I have tried adjusting the kernel options acpi_osi= and acpi_backlight= (that did work with 12.10) to make it work but to no avail. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: linux-image-generic 3.8.0.21.37 ProcVersionSignature: Ubuntu 3.8.0-21.32-generic 3.8.8 Uname: Linux 3.8.0-21-generic x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: thomasc2007 F pulseaudio Date: Mon May 20 12:45:35 2013 HibernationDevice: RESUME=UUID=2acc4a8c-a645-4f3c-bc8e-5c7a9d9df417 InstallationDate: Installed on 2013-04-11 (38 days ago) InstallationMedia: Ubuntu-GNOME 13.04 "Raring Ringtail" - Alpha amd64 (20130410) MachineType: Acer Aspire V5-431 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-21-generic root=UUID=4cfdb2ed-677a-4fd0-aa7d-5b118700bd35 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.8.0-21-generic N/A linux-backports-modules-3.8.0-21-generic N/A linux-firmware1.106 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/12/2012 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: V1.20 dmi.board.asset.tag: No Asset Tag dmi.board.name: Aspire V5-431 dmi.board.vendor: Acer dmi.board.version: V1.20 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: Acer dmi.chassis.version: V1.20 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvrV1.20:bd12/12/2012:svnAcer:pnAspireV5-431:pvrV1.20:rvnAcer:rnAspireV5-431:rvrV1.20:cvnAcer:ct9:cvrV1.20: dmi.product.name: Aspire V5-431 dmi.product.version: V1.20 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1181927/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1077440] Re: [VMWare Player 5.0.x] Quantal+ as guest hangs at end of install
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1077440 Title: [VMWare Player 5.0.x] Quantal+ as guest hangs at end of install Status in “linux” package in Ubuntu: Incomplete Bug description: Installing Ubuntu 12.10 Desktop i386 (ubuntu-12.10-desktop-i386.iso) in VMware player hangs at the end of installation. I tried on two PC's each time it hung at slightly different spot: - desktop PC with Windows 7 Home Premium Sp1 64 bit, VMWare Player 5.0.0: hangs when installation is complete on the reboot, last message on screen is: Asking all remaining processes to terminate... - same PC, VMWare Player 5.0.1 : exactly same situation - laptop with Windows 7 Professional SP1 64 bit, VMWare Player 5.0.0: installation succeeds, but hangs on first boot up, last message on screen is: * Checking battery state... --- ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 3088 F pulseaudio ubuntu 4936 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CasperVersion: 1.331 CurrentDmesg: [9.788092] pcnet32 :02:01.0 eth0: link up DistroRelease: Ubuntu 13.04 IwConfig: lono wireless extensions. eth0 no wireless extensions. LiveMediaBuild: Ubuntu 13.04 "Raring Ringtail" - Release i386 (20130424) Lsusb: Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: VMware, Inc. VMware Virtual Platform MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 svgadrmfb ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 RfKill: Tags: raring Uname: Linux 3.8.0-19-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 07/02/2012 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd07/02/2012:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1077440/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1201665] Re: [[HP Pavilion dv6-4008tx Entertainment Notebook PC] Function Keys do not work - brightness, sound, wireless
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1201665 Title: [[HP Pavilion dv6-4008tx Entertainment Notebook PC] Function Keys do not work - brightness, sound, wireless Status in “linux” package in Ubuntu: Incomplete Bug description: Hi, Just upgraded to saucy 13.10 as this bug exists in raring too. The fn keys do not work. Brightness works in the brightness panel with the slider. Have tested audio keys in rythmbox and no result. F1 ? (question mark symbol on key) 0x3a 0xba F2 Brightness Down 0x3b 0xbb F3 Brightness Up 0x3c 0xbc F4 | Square | (two lines on the outside of a square) perhaps a reference to a monitor0x3d 0xbd F5 |<< (rewind?) 0x3e 0xbe F6 >|| (Play or pause) 0x3f 0xbf F7 Stop 0x40 0xc0 F8 >>| (fast forward) 0x41 0xc1 F9 Volume down 0x42 0xc2 F10 volume up 0x43 0xc3 Numbering changes for F11 F12 F11 Mute 0x57 0xd7 F12 Wireless on/off 0x58 0xd8 Cheers, ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-2-generic 3.10.0-2.11 ProcVersionSignature: Ubuntu 3.10.0-2.11-generic 3.10.0 Uname: Linux 3.10.0-2-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.10.2-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: z 2187 F pulseaudio /dev/snd/controlC0: z 2187 F pulseaudio Date: Tue Jul 16 13:03:55 2013 HibernationDevice: RESUME=UUID=da95f1e0-c928-4bd6-98d8-e76486710b08 InstallationDate: Installed on 2013-07-13 (2 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64+mac (20130424) MachineType: Hewlett-Packard HP Pavilion dv6 Notebook PC MarkForUpload: True ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.10.0-2-generic root=/dev/mapper/ubuntu--vg-root ro video.use_bios_initial_backlight=0 quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.10.0-2-generic N/A linux-backports-modules-3.10.0-2-generic N/A linux-firmware1.112 SourcePackage: linux UpgradeStatus: Upgraded to saucy on 2013-07-16 (0 days ago) dmi.bios.date: 07/26/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.0F dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1594 dmi.board.vendor: Hewlett-Packard dmi.board.version: 91.36 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnHewlett-Packard:bvrF.0F:bd07/26/2011:svnHewlett-Packard:pnHPPaviliondv6NotebookPC:pvr058420242B2620100:rvnHewlett-Packard:rn1594:rvr91.36:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion dv6 Notebook PC dmi.product.version: 058420242B2620100 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1201665/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1063474] Re: System fails to connect to iHOS-104 DVD drive with nvidia MCP61 chipset.
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1063474 Title: System fails to connect to iHOS-104 DVD drive with nvidia MCP61 chipset. Status in “linux” package in Ubuntu: Incomplete Bug description: The computer fails to connect to the LG iHOS-104 DVD drive. The drive is working, as it will boot the Windows installer. I have seen similar bugs posted on the internet for the past 5 years. Here's a thread that shows the problem fixed for the MCP55 chipset. http://www.gossamer- threads.com/lists/linux/kernel/1234502?do=post_view_threaded#1234502 WORKAROUND: Use the DVD drive with a USB-SATA adapter. Upstream discussion: http://marc.info/?l=linux- ide&m=137736028900971&w=2 ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: linux-image-3.5.0-17-generic 3.5.0-17.27 ProcVersionSignature: Ubuntu 3.5.0-17.27-generic 3.5.5 Uname: Linux 3.5.0-17-generic x86_64 ApportVersion: 2.6.1-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: watchtv7366 F pulseaudio /dev/snd/controlC0: watchtv4814 F alsamixer watchtv7366 F pulseaudio CRDA: Error: [Errno 2] No such file or directory: 'iw' Date: Sun Oct 7 19:34:10 2012 HibernationDevice: RESUME=UUID=914386c4-84a9-4eb4-8382-cb6f877f7ef6 IwConfig: eth0 no wireless extensions. lono wireless extensions. Lsusb: Bus 002 Device 006: ID 046d:c047 Logitech, Inc. Laser Mouse Bus 002 Device 005: ID 0e8f:0021 GreenAsia Inc. Multimedia Keyboard Controller Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: Gigabyte Technology Co., Ltd. M68M-S2P ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=81823799-2b15-4236-887b-e3497f3f6a46 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.5.0-17-generic N/A linux-backports-modules-3.5.0-17-generic N/A linux-firmware1.94 RfKill: SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) WifiSyslog: dmi.bios.date: 07/15/2010 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: FCb dmi.board.name: M68M-S2P dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrFCb:bd07/15/2010:svnGigabyteTechnologyCo.,Ltd.:pnM68M-S2P:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnM68M-S2P:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: M68M-S2P dmi.sys.vendor: Gigabyte Technology Co., Ltd. --- ApportVersion: 2.12-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: watchtv1305 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. CurrentDmesg: [ 55.165828] pool[1480]: segfault at 40 ip 7f3d05544f87 sp 7f3d03653c50 error 4 in tumbler-gst-thumbnailer.so[7f3d05542000+4000] [ 707.285402] python[6778]: segfault at 0 ip 7eff23bde2f7 sp 7fffeba941f8 error 4 in libgtk-3.so.0.800.2[7eff23ade000+4c5000] DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=914386c4-84a9-4eb4-8382-cb6f877f7ef6 IwConfig: eth0 no wireless extensions. lono wireless extensions. Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 003: ID 0e8f:0021 GreenAsia Inc. Multimedia Keyboard Controller Bus 002 Device 002: ID 045e:0719 Microsoft Corp. Xbox 360 Wireless Adapter Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: Gigabyte Technology Co., Ltd. M68M-S2P MarkForUpload: True Package: linux (not installed) ProcFB: 0
[Kernel-packages] [Bug 1214287] Re: [Dell Inspiron 15R 5521] suspend/resume failure
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1214287 Title: [Dell Inspiron 15R 5521] suspend/resume failure Status in “linux” package in Ubuntu: Incomplete Bug description: Dell Inc. Inspiron 5521 often crash when resuming. WORKAROUND: Don't use non default kernel parameters: acpi_osi=Linux acpi_backlight=vendor ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-2-generic 3.11.0-2.5 ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5 Uname: Linux 3.11.0-2-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: nicolas2763 F pulseaudio Date: Tue Aug 20 10:02:28 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=173db09c-bffc-4da9-ab42-7ca73f84e71f InstallationDate: Installed on 2013-04-08 (133 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5) InterpreterPath: /usr/bin/python3.3 MachineType: Dell Inc. Inspiron 5521 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb 1 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-2-generic root=UUID=09af3e13-8004-48fa-b0fe-116acbf8d3d7 ro crashkernel=384M-2G:64M,2G-:128M quiet splash acpi_osi=Linux acpi_backlight=vendor vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.11.0-2-generic N/A linux-backports-modules-3.11.0-2-generic N/A linux-firmware1.113 SourcePackage: linux StagingDrivers: rts5139 Title: [Dell Inc. Inspiron 5521] suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-06-24 (56 days ago) UserGroups: dmi.bios.date: 05/20/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A08 dmi.board.name: 0HK2KG dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: A08 dmi.modalias: dmi:bvnDellInc.:bvrA08:bd05/20/2013:svnDellInc.:pnInspiron5521:pvrA08:rvnDellInc.:rn0HK2KG:rvrA00:cvnDellInc.:ct8:cvrA08: dmi.product.name: Inspiron 5521 dmi.product.version: A08 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1214287/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1035556] Re: 1002:9442 Monitor not detected via DisplayPort [Radeon HD 4850]
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1035556 Title: 1002:9442 Monitor not detected via DisplayPort [Radeon HD 4850] Status in “linux” package in Ubuntu: Incomplete Bug description: I have a PowerColor AX4850 512MD3-DHO video card, a BenQ XL2420TX monitor, and a Dell 3008WFP monitor. I tried to connect the BenQ monitor with the DisplayPort connection. This video driver did not recognize that there was anything plugged in. Even if the BenQ was the only monitor connected, the OS driver found nothing. WORKAROUND: The ATI binary BLOB did properly recognize this monitor plugged in to the DisplayPort, but that driver is unusable for other reasons. I currently have this monitor connected via HDMI, but this connection precludes the use of 120 hz refresh and 3D video. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xserver-xorg-video-radeon 1:6.14.99~git20111219.aacbd629-0ubuntu2 ProcVersionSignature: Ubuntu 3.2.0-29.46-generic 3.2.24 Uname: Linux 3.2.0-29-generic x86_64 .tmp.unity.support.test.0: ApportVersion: 2.0.1-0ubuntu12 Architecture: amd64 CompizPlugins: [core,composite,opengl,compiztoolbox,decor,snap,expo,move,resize,scale,regex] CompositorRunning: None Date: Fri Aug 10 21:37:57 2012 DistUpgraded: 2012-04-28 14:29:07,399 DEBUG enabling apt cron job DistroCodename: precise DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Advanced Micro Devices [AMD] nee ATI RV770 [Radeon HD 4850] [1002:9442] (prog-if 00 [VGA controller]) Subsystem: Hightech Information System Ltd. Device [1787:2266] InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) MachineType: System manufacturer System Product Name ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-29-generic root=UUID=c2921384-38b9-419e-b7ef-007bcc801561 ro nosplash debug --verbose SourcePackage: xserver-xorg-video-ati UpgradeStatus: Upgraded to precise on 2012-04-28 (104 days ago) dmi.bios.date: 09/21/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2209 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: P6T DELUXE dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2209:bd09/21/2010:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP6TDELUXE:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz 1:0.9.7.8-0ubuntu1.2 version.ia32-libs: ia32-libs 20090808ubuntu36 version.libdrm2: libdrm2 2.4.32-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.2-0ubuntu3.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.2-0ubuntu3.1 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.6 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build2 --- ApportVersion: 2.12-0ubuntu3 Architecture: amd64 CasperVersion: 1.336 DistroRelease: Ubuntu 13.10 IwConfig: eth0 no wireless extensions. eth1 no wireless extensions. lono wireless extensions. LiveMediaBuild: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130817) MachineType: System manufacturer System Product Name Mar
[Kernel-packages] [Bug 1154242] Re: [Apple Inc. MacBookPro8, 2] suspend/resume failure with FireWire device plugged in
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1154242 Title: [Apple Inc. MacBookPro8,2] suspend/resume failure with FireWire device plugged in Status in “linux” package in Ubuntu: Incomplete Bug description: A FireWire device being plugged in at the time of suspend/resume causes the failure. If a FireWire device is plugged in while resuming, there is a very long delay (about 20 seconds) before the system suspends. After that, if the FireWire device loses connection or is unplugged while the computer is still suspended, resuming fails. This problem is still occurring on Ubuntu 13.10 with Linux kernel 3.10.0-3. ProblemType: KernelOops DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-12-generic 3.8.0-12.21 ProcVersionSignature: Ubuntu 3.8.0-12.21-generic 3.8.2 Uname: Linux 3.8.0-12-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.9.1-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: polarimetric 1998 F pulseaudio Date: Tue Mar 12 14:20:31 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=e6de4934-3dd3-42fc-954f-60d2f553fbb7 InstallationDate: Installed on 2013-02-09 (31 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64+mac (20130208) InterpreterPath: /usr/bin/python3.3 MachineType: Apple Inc. MacBookPro8,2 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 EFI VGA 1 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-12-generic root=UUID=da0ce19e-0833-4548-a4cb-f4389fd6d8b0 ro quiet splash i915.lvds_channel_mode=2 i915.modeset=1 i915.lvds_use_ssc=0 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.8.0-12-generic N/A linux-backports-modules-3.8.0-12-generic N/A linux-firmware1.104 SourcePackage: linux Title: [Apple Inc. MacBookPro8,2] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 01/24/12 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBP81.88Z.0047.B27.1201241646 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-94245A3940C91C80 dmi.board.vendor: Apple Inc. dmi.board.version: MacBookPro8,2 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-94245A3940C91C80 dmi.modalias: dmi:bvnAppleInc.:bvrMBP81.88Z.0047.B27.1201241646:bd01/24/12:svnAppleInc.:pnMacBookPro8,2:pvr1.0:rvnAppleInc.:rnMac-94245A3940C91C80:rvrMacBookPro8,2:cvnAppleInc.:ct10:cvrMac-94245A3940C91C80: dmi.product.name: MacBookPro8,2 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1154242/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1213719] Re: [Samsung NP900X3D-A03IT] Powertop shows 100% Device Usage for audio codecs
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1213719 Title: [Samsung NP900X3D-A03IT] Powertop shows 100% Device Usage for audio codecs Status in “linux” package in Ubuntu: Incomplete Bug description: powertop reports that two audio codecs are both up 100% of the time, even when no sound is playing. 100,0%Audio codec hwC0D0: Realtek 100,0%Audio codec hwC0D3: Intel This happens on a Samsung Series 9 NP900X3D-A03IT. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.5.0-37-generic 3.5.0-37.58~precise1 ProcVersionSignature: Ubuntu 3.5.0-37.58~precise1-generic 3.5.7.16 Uname: Linux 3.5.0-37-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.25. ApportVersion: 2.0.1-0ubuntu17.4 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gioele 1759 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xf070 irq 50' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,144dc0d3,00100202 HDA:80862806,80860101,0010' Controls : 25 Simple ctrls : 11 Date: Sun Aug 18 22:42:34 2013 HibernationDevice: RESUME=UUID=7e63a512-9a2c-4503-9bd9-ec2f74a7f029 InstallationMedia: Ubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64 (20130504) MachineType: SAMSUNG ELECTRONICS CO., LTD. 900X3C/900X3D/900X3E/900X4C/900X4D MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-37-generic root=UUID=9d6c757c-fda7-49cb-9e7c-e382ebdc4d53 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.5.0-37-generic N/A linux-backports-modules-3.5.0-37-generic N/A linux-firmware1.79.6 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/09/2013 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: P07ABK dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: NP900X3D-A03IT dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: FAB1 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvrP07ABK:bd04/09/2013:svnSAMSUNGELECTRONICSCO.,LTD.:pn900X3C/900X3D/900X3E/900X4C/900X4D:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP900X3D-A03IT:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1: dmi.product.name: 900X3C/900X3D/900X3E/900X4C/900X4D dmi.product.version: 0.1 dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1213719/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1200986] Re: Ubuntu live USB will not boot on Asus 1015e in UEFI mode
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1200986 Title: Ubuntu live USB will not boot on Asus 1015e in UEFI mode Status in “linux” package in Ubuntu: Incomplete Bug description: I recently got an Asus 1015e laptop and I cannot get a live USB to boot in UEFI mode. When I try to boot it I get to the Grub menu, but after selecting an option it just hangs at a blank screen. It looks like it doesn't loading anything, even the kernel. It just hangs immediately. The only way I've been able to get it to boot is to disable Secure Boot and enable CSM (legacy BIOS support) but this won't play nicely with a Windows 8 dual boot. I've tested with 13.04 and the 7-11-13 saucy daily image. The hardware details are here http://www.asus.com/Notebooks_Ultrabooks/1015E/#specifications To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1200986/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1199345] Re: Can't install on Hyper-V Server 2008 R2 SP1 (error video)
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to New. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux Status: New => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1199345 Title: Can't install on Hyper-V Server 2008 R2 SP1 (error video) Status in The Linux Kernel: Incomplete Status in “linux” package in Ubuntu: Confirmed Bug description: Microsoft Hyper-V Server 2008 R2 SP 1. Installing daily build 13.10 01.07.2013, 08.07.2013 and 09.07.2013. Have small resolution and error video in attach. --- ApportVersion: 2.9.2-0ubuntu8.4 Architecture: i386 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=ff4909f2-7a8e-41ef-8f6d-e946f0ab6cf4 InstallationDate: Installed on 2013-05-14 (119 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release i386 (20130424) IwConfig: lono wireless extensions. eth0 no wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: Microsoft Corporation Virtual Machine MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=ru_RU.UTF-8 SHELL=/bin/bash ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-30-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.8.0-30-generic N/A linux-backports-modules-3.8.0-30-generic N/A linux-firmware1.106 RfKill: Tags: raring Uname: Linux 3.8.0-30-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 03/19/2009 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 090004 dmi.board.name: Virtual Machine dmi.board.vendor: Microsoft Corporation dmi.board.version: 7.0 dmi.chassis.asset.tag: 1629-5805-2812-2971-2285-8339-49 dmi.chassis.type: 3 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 7.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr090004:bd03/19/2009:svnMicrosoftCorporation:pnVirtualMachine:pvr7.0:rvnMicrosoftCorporation:rnVirtualMachine:rvr7.0:cvnMicrosoftCorporation:ct3:cvr7.0: dmi.product.name: Virtual Machine dmi.product.version: 7.0 dmi.sys.vendor: Microsoft Corporation --- ApportVersion: 2.9.2-0ubuntu8.4 Architecture: i386 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=ff4909f2-7a8e-41ef-8f6d-e946f0ab6cf4 InstallationDate: Installed on 2013-05-14 (119 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release i386 (20130424) IwConfig: lono wireless extensions. eth0 no wireless extensions. Lsusb: Error: command ['lsusb'] failed with exit code 1: unable to initialize libusb: -99 MachineType: Microsoft Corporation Virtual Machine MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=ru_RU.UTF-8 SHELL=/bin/bash ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.8.0-30-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-mod
[Kernel-packages] [Bug 1062667] Re: 152d:2338 USB mounted SATA disk disconnects
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1062667 Title: 152d:2338 USB mounted SATA disk disconnects Status in “linux” package in Ubuntu: Incomplete Bug description: I'm having a problem with a SATA disk connected to a USB adapter. The disk is detected and its partitions mounted but after I use it for a few seconds to minutes the adapter disappears and dmesg lists errors. If I don't use the disk it stays healthy but running 'sudo cat /dev/sdb5 > /dev/null' consistently causes a failure within a minute. The disk works well connected to the internal slot of the same machine and the adapter works well with a 40GB IDE disk I have on hand. I looked at a similar looking bug, https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1012291 and booted a kernel from http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.2.27-precise/ which was reported as Linux tb201 3.2.27-030227-generic #201208101235 SMP Fri Aug 10 16:36:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux [disk] Crucial m4 SSD 2.5 256GB [sata-usb-adapter] Sabrent USB 2.0 to IDE/SATA Cable for 2.5-Inch/ 3.5-Inch / 5.25-Inch Drive with Power Adapter http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=2329300 lsusb describes it as ID 152d:2338 JMicron Technology Corp. / JMicron USA Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge [machine] thinkpad/lenovo x201 My original kernal is $ uname -a Linux tb201 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -rd Description: Ubuntu 12.04.1 LTS Release: 12.04 [dmesg] [ 1531.268620] usb 1-1.2: new high-speed USB device number 14 using ehci_hcd [ 1531.365102] scsi8 : usb-storage 1-1.2:1.0 [ 1532.363152] scsi 8:0:0:0: Direct-Access M4-CT256 M4SSD2 PQ: 0 ANSI: 2 CCS [ 1532.364388] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 1532.364941] sd 8:0:0:0: [sdc] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1532.365866] sd 8:0:0:0: [sdc] Write Protect is off [ 1532.365874] sd 8:0:0:0: [sdc] Mode Sense: 00 38 00 00 [ 1532.368182] sd 8:0:0:0: [sdc] Asking for cache data failed [ 1532.368189] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 1532.370961] sd 8:0:0:0: [sdc] Asking for cache data failed [ 1532.370967] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 1532.372341] sdc: sdc1 sdc2 < sdc5 > [ 1532.375711] sd 8:0:0:0: [sdc] Asking for cache data failed [ 1532.375718] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 1532.375723] sd 8:0:0:0: [sdc] Attached SCSI disk [ 1532.557075] EXT2-fs (sdc1): warning: mounting unchecked fs, running e2fsck is recommended [ 1563.212796] usb 1-1.2: reset high-speed USB device number 14 using ehci_hcd [ 1573.351537] usb 1-1.2: reset high-speed USB device number 14 using ehci_hcd [ 1610.072065] usb 1-1.2: reset high-speed USB device number 14 using ehci_hcd [ 1610.155698] usb 1-1.2: device descriptor read/64, error -71 [ 1610.343162] usb 1-1.2: device descriptor read/64, error -71 [ 1610.518733] usb 1-1.2: reset high-speed USB device number 14 using ehci_hcd [ 1610.602523] usb 1-1.2: device descriptor read/64, error -71 [ 1610.790042] usb 1-1.2: device descriptor read/64, error -71 [ 1610.965771] usb 1-1.2: reset high-speed USB device number 14 using ehci_hcd [ 1611.380486] usb 1-1.2: device not accepting address 14, error -71 [ 1611.452549] usb 1-1.2: reset high-speed USB device number 14 using ehci_hcd [ 1611.867289] usb 1-1.2: device not accepting address 14, error -71 [ 1611.867841] sd 8:0:0:0: Device offlined - not ready after error recovery [ 1611.867854] sd 8:0:0:0: [sdc] Unhandled error code [ 1611.867857] sd 8:0:0:0: [sdc] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK [ 1611.867862] sd 8:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 3c ae 00 00 08 00 [ 1611.867873] end_request: I/O erro
[Kernel-packages] [Bug 1104506] Re: 05dc:a201 [Dell Inspiron 660] Lexar JumpDrive S70 32GB intermittently takes 12 seconds to open
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1104506 Title: 05dc:a201 [Dell Inspiron 660] Lexar JumpDrive S70 32GB intermittently takes 12 seconds to open Status in “linux” package in Ubuntu: Incomplete Bug description: With disk utility, I create an encrypted USB2 flash drive. When I plug the drive into a USB2 socket, it can take up to 10 seconds for the password window to display. Ten seconds may not sound like much, but this process is usually near instantaneous. A 16GB Kingston Data Traveler, also encrypted, works fine. This is my first Lexar and first 32GB size for a flash drive. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-36-generic-pae 3.2.0-36.57 ProcVersionSignature: Ubuntu 3.2.0-36.57-generic-pae 3.2.35 Uname: Linux 3.2.0-36-generic-pae i686 NonfreeKernelModules: nvidia AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: peterzay 4665 F pulseaudio /dev/snd/controlC0: peterzay 4665 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xf791 irq 46' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:14f150a1,10280581,00100100 HDA:80862806,10280581,0010' Controls : 31 Simple ctrls : 13 Card1.Amixer.info: Card hw:1 'NVidia'/'HDA NVidia at 0xf708 irq 17' Mixer name : 'Nvidia GPU 1c HDMI/DP' Components : 'HDA:10de001c,10de0977,00100100' Controls : 12 Simple ctrls : 2 Date: Thu Jan 24 17:04:52 2013 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=e88c9651-8972-4dee-a10e-27225c840e4c InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release i386 (20120423) MachineType: Dell Inc. Inspiron 660 MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-36-generic-pae root=UUID=e8effe4c-bd23-4254-93d4-fe7481d882ef ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-36-generic-pae N/A linux-backports-modules-3.2.0-36-generic-pae N/A linux-firmware1.79.1 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/26/2012 dmi.bios.vendor: Dell Inc. dmi.bios.version: A05 dmi.board.name: 0XR1GT dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA05:bd07/26/2012:svnDellInc.:pnInspiron660:pvr:rvnDellInc.:rn0XR1GT:rvrA00:cvnDellInc.:ct3:cvr: dmi.product.name: Inspiron 660 dmi.sys.vendor: Dell Inc. --- ApportVersion: 2.12-0ubuntu3 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2807 F pulseaudio ubuntu 4733 F pulseaudio /dev/snd/controlC0: ubuntu 2807 F pulseaudio ubuntu 4733 F pulseaudio CasperVersion: 1.336 DistroRelease: Ubuntu 13.10 LiveMediaBuild: Ubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130809) MachineType: Dell Inc. Inspiron 660 MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb 1 nouveaufb ProcKernelCmdLine: file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet spla
[Kernel-packages] [Bug 1197078] Re: mininet created devices are not deleted correctly
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1197078 Title: mininet created devices are not deleted correctly Status in “linux” package in Ubuntu: Incomplete Status in “mininet” package in Ubuntu: Confirmed Bug description: Raised upstream: https://mailman.stanford.edu/pipermail/mininet- discuss/2013-July/002473.html Also seen in DEP-8 tests for Saucy: https://jenkins.qa.ubuntu.com/job/saucy-adt- openvswitch/28/ARCH=i386,label=adt/ Syslog extract: Jul 1 10:57:42 autopkgtest ovs-vsctl: 1|vsctl|INFO|Called as ovs-vsctl del-br s2 Jul 1 10:57:42 autopkgtest kernel: [ 402.953438] device s2-eth3 left promiscuous mode Jul 1 10:57:42 autopkgtest kernel: [ 402.953588] device s2-eth4 left promiscuous mode Jul 1 10:57:42 autopkgtest kernel: [ 402.953724] device s2-eth7 left promiscuous mode Jul 1 10:57:42 autopkgtest kernel: [ 402.953853] device s2-eth6 left promiscuous mode Jul 1 10:57:42 autopkgtest kernel: [ 402.953986] device s2-eth2 left promiscuous mode Jul 1 10:57:42 autopkgtest kernel: [ 402.954049] device s2 left promiscuous mode Jul 1 10:57:42 autopkgtest ovs-controller: 00366|poll_loop|DBG|wakeup due to [POLLIN] on fd 9 (127.0.0.1:6633<->127.0.0.1:40235) at ../lib/stream-fd.c:142 (0% CPU usage) Jul 1 10:57:42 autopkgtest ovs-controller: 00367|rconn|DBG|tcp:127.0.0.1:40235: connection closed by peer Jul 1 10:57:42 autopkgtest ovs-controller: 00368|rconn|DBG|void: entering VOID Jul 1 10:57:42 autopkgtest ovs-controller: 00369|poll_loop|DBG|wakeup due to [POLLIN] on fd 6 (FIFO pipe:[44662]) at ../lib/fatal-signal.c:173 (0% CPU usage) Jul 1 10:57:42 autopkgtest ovs-controller: 00370|fatal_signal|WARN|terminating with signal 15 (Terminated) Jul 1 10:57:42 autopkgtest kernel: [ 403.376840] IPv6: ADDRCONF(NETDEV_UP): s1-eth1: link is not ready Jul 1 10:57:52 autopkgtest kernel: [ 413.552113] unregister_netdevice: waiting for lo to become free. Usage count = 2 Jul 1 10:58:03 autopkgtest kernel: [ 423.792110] unregister_netdevice: waiting for lo to become free. Usage count = 2 Jul 1 10:58:13 autopkgtest kernel: [ 434.032116] unregister_netdevice: waiting for lo to become free. Usage count = 2 Jul 1 10:58:23 autopkgtest kernel: [ 444.272126] unregister_netdevice: waiting for lo to become free. Usage count = 2 ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: mininet 2.0.0-0ubuntu1 ProcVersionSignature: Ubuntu 3.10.0-1.8-generic 3.10.0-rc7 Uname: Linux 3.10.0-1-generic x86_64 ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 Date: Tue Jul 2 19:17:36 2013 EcryptfsInUse: Yes InstallationDate: Installed on 2013-04-23 (70 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130423) MarkForUpload: True SourcePackage: mininet UpgradeStatus: Upgraded to saucy on 2013-06-15 (16 days ago) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.10.0-1-generic. AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.10.2-0ubuntu3 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Error: [Errno 2] No such file or directory Card0.Amixer.values: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=bef939a0-3cc6-48d6-b35f-c20c153e248e InstallationDate: Installed on 2013-05-20 (43 days ago) InstallationMedia: Ubuntu-Server 13.10 "Saucy Salamander" - Alpha amd64 (20130520) MachineType: Dell Inc. Vostro 1220 MarkForUpload: True Package: mininet 2.0.0-0ubuntu1 PackageArchitecture: amd64 ProcFB: 0 inteldrmfb ProcKern
[Kernel-packages] [Bug 1129511] Re: Unable to boot system in EFI unless acpi=off & "quiet splash" deleted from grub
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1129511 Title: Unable to boot system in EFI unless acpi=off & "quiet splash" deleted from grub Status in “linux” package in Ubuntu: Incomplete Bug description: MSI notebook, Model GT70-0NC-008US; tag under the battery shows GT70 -0NC-494US Am not running as a dual boot install. I unable to boot this system unless acpi=off and "quiet splash" is deleted from grub. I am running this as the only OS, NOT a dual boot. I am able to boot, install and run 12.04 Precise 64 bit on this system, BIOS in legacy mode for install and running from HDD. Following steps in Debugging ACPT - Ubuntu Wiki (https://wiki.ubuntu.com/DebuggingACPI) I have updated to the latest BIOS on the box. WORKAROUND: Use legacy boot mode. WORKAROUND: With 12.10 installed to HDD tried booting with all options given in the Wiki and with acpi=off and "quiet splash" deleted, system boots ok and into usable environment. With acpi=noirq and "quiet splash" deleted system starts to boot and stops with the following as last line: [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9 With pnpacpi=off and "quiet splash" deleted system starts to boot and stops with the following as last line, same as above: [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9 With noapic and "quiet splash" deleted, system starts to boot and stops with the following as last line, same as above: [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9 With nolapic and "quiet splash" deleted, system starts to boot and stops with the following as last line, same as above: [drm] nouveau :01:00.0: 0x9904: Init table command not found: 0xA9 In the troubleshooting steps I was unable to suspend or hibernate the system so am unable to supply a /var/log/kern.log.0 file. I am unable to include a tarball of /proc/acpi directory as that directory doesn't exist. --- ApportVersion: 2.6.1-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lou1920 F pulseaudio DistroRelease: Ubuntu 12.10 HibernationDevice: RESUME=UUID=13a3d49b-35d0-4f55-8983-20577f3f3704 InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5) MachineType: Micro-Star International Co., Ltd. GT70 Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.5.0-17-generic root=/dev/mapper/ubuntu-root ro acpi=off ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5 RelatedPackageVersions: linux-restricted-modules-3.5.0-17-generic N/A linux-backports-modules-3.5.0-17-generic N/A linux-firmware1.95 StagingDrivers: rts_pstor Tags: quantal running-unity staging Uname: Linux 3.5.0-17-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 11/23/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: E1762IMS.50U dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: MS-1762 dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: REV:1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Micro-Star International dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrE1762IMS.50U:bd11/23/2012:svnMicro-StarInternationalCo.,Ltd.:pnGT70:pvrREV1.0:rvnMicro-StarInternationalCo.,Ltd.:rnMS-1762:rvrREV1.0:cvnMicro-StarInternational:ct10:cvrN/A: dmi.product.name: GT70 dmi.product.version: REV:1.0 dmi.sys.vendor: Micro-Star International Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1129511/
[Kernel-packages] [Bug 1200204] Re: 2040:7200 SuperSpeed USB failure (and kernel oops) after launching tvtime: ERROR Transfer event TRB DMA ptr not part of current TD; unable to handle kernel NULL poi
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1200204 Title: 2040:7200 SuperSpeed USB failure (and kernel oops) after launching tvtime: ERROR Transfer event TRB DMA ptr not part of current TD; unable to handle kernel NULL pointer dereference at 0018; IP is at usb_set_interface+0x19/0x2d0 Status in “linux” package in Ubuntu: Incomplete Bug description: The machine has Ubuntu 13.04 installed, and it consists of an ASUS H87I-PLUS motherboard with Haswell hardware and a combination of USB 2.0 and SuperSpeed USB ports. I am having trouble using it with a Hauppauge WinTV-HVR-950Q TV tuner card. Plugging in the card or leaving it plugged in before boot does not lead to any failures, but after I launch tvtime, it causes a USB failure, which causes USB shutdown and then a kernel oops. I plugged the card into various USB 2.0 and SuperSpeed USB ports, and I have even used version 3.10 of the Linux kernel. However, the same result occurred whether a SuperSpeed USB port or a USB 2.0 port was used, and the same USB failure (with USB shutdown but without a kernel oops) occurred in version 3.10 of Linux. I tried the same version of Ubuntu (with an official Ubuntu- supported kernel) on a Lenovo X201 Tablet containing only USB 2.0 ports, and it seems to work fine. This leads me to believe that there is a bug in the xhci driver. Attached are logs documenting the USB failure in both the Ubuntu-supported 3.8.0 kernel and the 3.10 kernel that occurred on launch of tvtime. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-26-generic 3.8.0-26.38 ProcVersionSignature: Ubuntu 3.8.0-26.38-generic 3.8.13.2 Uname: Linux 3.8.0-26-generic x86_64 ApportVersion: 2.9.2-0ubuntu8.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: ron1937 F pulseaudio /dev/snd/controlC1: ron1937 F pulseaudio /dev/snd/controlC0: ron1937 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. Date: Wed Jul 10 08:16:02 2013 HibernationDevice: RESUME=UUID=eb7fabf7-3980-4caf-af26-e6c53469c718 InstallationDate: Installed on 2013-07-06 (4 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) IwConfig: eth1 no wireless extensions. lono wireless extensions. MachineType: ASUS All Series MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-26-generic root=UUID=6a9a5196-9fc6-43aa-befb-efe292bed5a1 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.8.0-26-generic N/A linux-backports-modules-3.8.0-26-generic N/A linux-firmware1.106 RfKill: SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/15/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0306 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: H87I-PLUS dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0306:bd04/15/2013:svnASUS:pnAllSeries:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnH87I-PLUS:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: All Series dmi.product.version: System Version dmi.sys.vendor: ASUS To manage notifications about th
[Kernel-packages] [Bug 1153252] Re: 14e4:4727 [Samsung NP-RF511-S03SE] wifi stops working when laptop lid is closed
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1153252 Title: 14e4:4727 [Samsung NP-RF511-S03SE] wifi stops working when laptop lid is closed Status in “linux” package in Ubuntu: Incomplete Bug description: In Ubuntu 12.10, when I close the laptop lid, the wlan connection is closed. Wired (ethernet) connections keep working normally. This prevents using only external monitor in places where wired connections are not accessible and forces the user to keep the laptop display on even if it is not needed. Changing the power manager settings to "Do nothing" does not affect this. It also does not matter if the laptop is plugged in or not. Apparently, at some point, disabling the screen saver would fix this issue. However, there is no such setting on Ubuntu 12.10. --- ApportVersion: 2.6.1-0ubuntu10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: unksi 2255 F pulseaudio /dev/snd/pcmC0D0p: unksi 2255 F...m pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 12.10 InstallationDate: Installed on 2013-03-01 (16 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5) MachineType: SAMSUNG ELECTRONICS CO., LTD. RF511/RF411/RF711 MarkForUpload: True NonfreeKernelModules: wl Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-25-generic root=UUID=a7bbcbf4-2e43-442d-a6e9-c22e2a1016c0 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.5.0-25.39-generic 3.5.7.4 RelatedPackageVersions: linux-restricted-modules-3.5.0-25-generic N/A linux-backports-modules-3.5.0-25-generic N/A linux-firmware1.95 Tags: quantal running-unity Uname: Linux 3.5.0-25-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers dmi.bios.date: 11/27/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 17HX.M045.20121127.SSH dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: RF511/RF411/RF711 dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: 17HX dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr17HX.M045.20121127.SSH:bd11/27/2012:svnSAMSUNGELECTRONICSCO.,LTD.:pnRF511/RF411/RF711:pvr17HX:rvnSAMSUNGELECTRONICSCO.,LTD.:rnRF511/RF411/RF711:rvr17HX:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A: dmi.product.name: RF511/RF411/RF711 dmi.product.version: 17HX dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1153252/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1208252] Re: [HP Compaq nx9420 Notebook PC] My bluetooth does not function
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1208252 Title: [HP Compaq nx9420 Notebook PC] My bluetooth does not function Status in “linux” package in Ubuntu: Incomplete Bug description: This is it. It just does not work. It is turnt on. I've tried to switch it on through the "Bluetooth" module in System Settings but when you click the "On" button, it automatically changes to "Off" in a second. The bug does not exist in 12.04, 12.10 and 13.04. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.10.0-6-generic 3.10.0-6.17 ProcVersionSignature: Ubuntu 3.10.0-6.17-generic 3.10.3 Uname: Linux 3.10.0-6-generic i686 ApportVersion: 2.12-0ubuntu2 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 2759 F pulseaudio CasperVersion: 1.336 Date: Sun Aug 4 21:10:05 2013 LiveMediaBuild: Ubuntu 13.10 "Saucy Salamander" - Alpha i386 (20130804) MarkForUpload: True PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: file=/cdrom/preseed/hostname.seed boot=casper initrd=/casper/initrd.lz quiet splash -- PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.10.0-6-generic N/A linux-backports-modules-3.10.0-6-generic N/A linux-firmware1.112 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/11/2008 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68YAF Ver. F.1D dmi.board.name: 309F dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 54.3D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68YAFVer.F.1D:bd07/11/2008:svnHewlett-Packard:pn:pvrF.1D:rvnHewlett-Packard:rn309F:rvrKBCVersion54.3D:cvnHewlett-Packard:ct10:cvr: dmi.product.version: F.1D dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1208252/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1193661] Re: [Apple Inc. MacBookPro10, 1] suspend/resume failure [non-free: wl]
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1193661 Title: [Apple Inc. MacBookPro10,1] suspend/resume failure [non-free: wl] Status in “linux” package in Ubuntu: Incomplete Status in “linux” source package in Saucy: Incomplete Bug description: as many have noted... runnimg ubuntu on a retina macbook has many issues... this specific bug prevents the mac from waking back up from suspended state after closing the lid. Also the screen brightness is not controllable. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.9.0-6-generic 3.9.0-6.14 ProcVersionSignature: Ubuntu 3.9.0-6.14-generic 3.9.6 Uname: Linux 3.9.0-6-generic x86_64 NonfreeKernelModules: wl Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.10.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: roland 1434 F pulseaudio /dev/snd/controlC0: roland 1434 F pulseaudio Date: Sat Jun 22 12:46:28 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=90f54f23-810f-4c22-8b5b-015897e7bc6e InstallationDate: Installed on 2013-06-21 (0 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64+mac (20130621) InterpreterPath: /usr/bin/python3.3 MachineType: Apple Inc. MacBookPro10,1 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.9.0-6-generic root=UUID=59486b17-48bc-4fd8-a452-57a1fb6f2f08 ro acpi_backlight=vendor quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.9.0-6-generic N/A linux-backports-modules-3.9.0-6-generic N/A linux-firmware 1.109 SourcePackage: linux Title: [Apple Inc. MacBookPro10,1] suspend/resume failure [non-free: wl] UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 08/08/2012 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBP101.88Z.00EE.B02.1208081132 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-C3EC7CD22292981F dmi.board.vendor: Apple Inc. dmi.board.version: MacBookPro10,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-C3EC7CD22292981F dmi.modalias: dmi:bvnAppleInc.:bvrMBP101.88Z.00EE.B02.1208081132:bd08/08/2012:svnAppleInc.:pnMacBookPro10,1:pvr1.0:rvnAppleInc.:rnMac-C3EC7CD22292981F:rvrMacBookPro10,1:cvnAppleInc.:ct10:cvrMac-C3EC7CD22292981F: dmi.product.name: MacBookPro10,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1193661/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1213009] Re: alx driver is not working after system resume
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1213009 Title: alx driver is not working after system resume Status in “linux” package in Ubuntu: Incomplete Bug description: The following is being reproduced every-time: When coming back from suspend, the alx driver wont work: I get 'Cable unplugged' in th e kde network manager and when I type dmesg, I see the following lines (continuing endlessly, until the computer is restarted): [ 866.183169] alx :04:00.0: invalid PHY speed/duplex: 0x [ 866.184192] alx :04:00.0: invalid PHY speed/duplex: 0x [ 866.185233] alx :04:00.0: invalid PHY speed/duplex: 0x [ 866.186255] alx :04:00.0: invalid PHY speed/duplex: 0x [ 866.187278] alx :04:00.0: invalid PHY speed/duplex: 0x [ 866.188298] alx :04:00.0: invalid PHY speed/duplex: 0x [ 866.189314] alx :04:00.0: invalid PHY speed/duplex: 0x [ 866.190345] alx :04:00.0: invalid PHY speed/duplex: 0x ... also if I try to do something like ifconfig eth0 down the system is hanged (alternatively it is also hanged when I go to the network manager and uncheck the box 'Enable Networking') I'm attaching the output of ifconfig and ip before and after suspend, in case it might provide help. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-2-generic 3.11.0-2.5 ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5 Uname: Linux 3.11.0-2-generic x86_64 ApportVersion: 2.12-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: nope 1852 F pulseaudio Date: Fri Aug 16 12:34:30 2013 HibernationDevice: RESUME=UUID=c2788727-ecc5-4f11-9246-3047690865eb MachineType: ASUSTeK COMPUTER INC. N56VB MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-2-generic root=UUID=58208c52-0ccf-4acc-b88d-b116fe6d369e ro quiet splash pcie_aspm=force acpi_backlight=vendor vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-2-generic N/A linux-backports-modules-3.11.0-2-generic N/A linux-firmware1.113 SourcePackage: linux UpgradeStatus: Upgraded to saucy on 2013-08-08 (8 days ago) dmi.bios.date: 01/21/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N56VB.202 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N56VB dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN56VB.202:bd01/21/2013:svnASUSTeKCOMPUTERINC.:pnN56VB:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN56VB:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N56VB dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1213009/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1021924] Re: 8086:0162 [Intel DQ77MK] Multiple Displays not working
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1021924 Title: 8086:0162 [Intel DQ77MK] Multiple Displays not working Status in X.Org X server: Confirmed Status in “linux” package in Ubuntu: Incomplete Status in “linux” source package in Precise: Confirmed Bug description: I have an Intel DQ77MK motherboard, which has 2 DVI connectors, and a Core i7 3770S IvyBridge CPU. Under Ubuntu 12.04, the multiple display support does not work, and I am stuck with a single display. The second screen only shows all pixels as 100% red. Enabling the second screen in Displays in System Settings does allow me to move windows and the mouse cursor to that screen, though I cannot actually see anything on it, as everything is red. For now I have had to force it to mirror displays, to avoid moving things to the second screen. Also, on the daily live image for Quantal, the system appears to freeze when X starts, and I am left with the primary screen being black, and the secondary screen being full red. The plymouth framebuffer is a fuzzy green image, and everything turns black when X comes up. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: xorg 1:7.6+12ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-25.40-generic-pae 3.2.18 Uname: Linux 3.2.0-25-generic-pae i686 ApportVersion: 2.0.1-0ubuntu8 Architecture: i386 CompizPlugins: [core,bailer,detection,composite,opengl,decor,gnomecompat,regex,animation,snap,grid,compiztoolbox,move,vpswitch,resize,place,imgpng,mousepoll,workarounds,expo,session,resizeinfo,ezoom,wall,fade,scale,unityshell] CompositorRunning: None Date: Fri Jul 6 16:11:55 2012 DistUpgraded: 2012-01-12 17:06:50,933 DEBUG enabling apt cron job DistroCodename: precise DistroVariant: ubuntu DkmsStatus: nvidia-current, 295.53, 3.2.0-25-generic-pae, i686: installed virtualbox, 4.1.12, 3.2.0-25-generic-pae, i686: installed ExtraDebuggingInterest: Yes, whatever it takes to get this fixed in Ubuntu GraphicsCard: Intel Corporation Ivy Bridge Graphics Controller [8086:0162] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device [8086:2035] ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.2.0-25-generic-pae root=UUID=e3ff1788-609f-430f-b0e6-f696b2a2e06d ro quiet splash vt.handoff=7 SourcePackage: xorg UnitySupportTest: Error: command ['/usr/lib/nux/unity_support_test', '-p', '-f'] failed with exit code 5: Xlib: extension "GLX" missing on display ":0.0". Error: GLX is not available on the system UpgradeStatus: Upgraded to precise on 2012-01-12 (175 days ago) dmi.bios.date: 03/20/2012 dmi.bios.vendor: Intel Corp. dmi.bios.version: MKQ7710H.86A.0034.2012.0320.2026 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: DQ77MK dmi.board.vendor: Intel Corporation dmi.board.version: AAG39642-301 dmi.chassis.type: 3 dmi.modalias: dmi:bvnIntelCorp.:bvrMKQ7710H.86A.0034.2012.0320.2026:bd03/20/2012:svn:pn:pvr:rvnIntelCorporation:rnDQ77MK:rvrAAG39642-301:cvn:ct3:cvr: version.compiz: compiz 1:0.9.7.8-0ubuntu1 version.libdrm2: libdrm2 2.4.32-1ubuntu1 version.libgl1-mesa-dri: libgl1-mesa-dri 8.0.2-0ubuntu3.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 8.0.2-0ubuntu3.1 version.xserver-xorg-core: xserver-xorg-core 2:1.11.4-0ubuntu10.3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.7.0-0ubuntu1.2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.14.99~git20111219.aacbd629-0ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.17.0-1ubuntu4 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20111201+b5534a1-1build2 To manage notifications about this bug go to: https://bugs.launchpad.net/xorg-server/+bug/1021924/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsu
[Kernel-packages] [Bug 1212041] Re: suspend/resume failure, Dell Inspiron 530
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1212041 Title: suspend/resume failure, Dell Inspiron 530 Status in “linux” package in Ubuntu: Incomplete Bug description: Suspend appeard to work fine. Resume came back, monitor backlight turned on and disk spun a bit, but no visible graphics or reaction to input. Had to alt+sysrq+reisub to force a reboot. This is a regression since the update to kernel 3.11.0 a few days ago. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-2-generic 3.11.0-2.5 ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5 Uname: Linux 3.11.0-2-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12-0ubuntu3 Architecture: amd64 Date: Tue Aug 13 20:15:07 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume InstallationDate: Installed on 2011-09-24 (689 days ago) InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Beta amd64 (20110921.2) InterpreterPath: /usr/bin/python3.3 MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-2-generic root=UUID=60269649-642d-4672-83bb-7bfadaae6e31 ro quiet splash vt.handoff=7 SourcePackage: linux Title: suspend/resume failure UpgradeStatus: Upgraded to saucy on 2013-06-08 (66 days ago) UserGroups: dmi.bios.date: 06/20/2008 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.0.15 dmi.board.name: 0FM586 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: OEM dmi.modalias: dmi:bvnDellInc.:bvr1.0.15:bd06/20/2008:svnDellInc.:pnInspiron530:pvr:rvnDellInc.:rn0FM586:rvr:cvnDellInc.:ct3:cvrOEM: dmi.product.name: Inspiron 530 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1212041/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1168224] Re: 045e:0745 [HP TouchSmart tm2t-2200] No scancode for several keys of Microsoft Comfort Desktop 5000
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1168224 Title: 045e:0745 [HP TouchSmart tm2t-2200] No scancode for several keys of Microsoft Comfort Desktop 5000 Status in “linux” package in Ubuntu: Incomplete Bug description: I wanted to map the keys labeled '1', '2', '3', '4', and '5' above the F-keys between the camera key and the star key, and directly to the right of the right ALT key but I discovered that these raise no events whatsoever via dmesg, xev, nor showkey. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-40-generic 3.2.0-40.64 ProcVersionSignature: Ubuntu 3.2.0-40.64-generic 3.2.40 Uname: Linux 3.2.0-40-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.1 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: arifogel 1861 F pulseaudio /dev/snd/controlC0: arifogel 1861 F pulseaudio Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xc450 irq 45' Mixer name : 'IDT 92HD81B1X5' Components : 'HDA:111d7605,103c1486,00100402' Controls : 16 Simple ctrls : 9 Card1.Amixer.info: Card hw:1 'Generic'/'HD-Audio Generic at 0xc442 irq 47' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 6 Simple ctrls : 1 Card1.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Date: Thu Apr 11 20:50:37 2013 HibernationDevice: RESUME=UUID=e46d0966-e5ee-4f6e-9e3f-1f21a65ac784 MachineType: Hewlett-Packard HP TouchSmart tm2 Notebook PC MarkForUpload: True ProcFB: 0 inteldrmfb 1 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.2.0-40-generic root=UUID=3be4864c-c530-4049-8cbf-dc74129749b5 ro loop.max_part=63 acpi_osi=Linux acpi_backlight=vendor RelatedPackageVersions: linux-restricted-modules-3.2.0-40-generic N/A linux-backports-modules-3.2.0-40-generic N/A linux-firmware1.79.1 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/18/2011 dmi.bios.vendor: Insyde dmi.bios.version: F.25 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 1486 dmi.board.vendor: Hewlett-Packard dmi.board.version: 83.20 dmi.chassis.asset.tag: CNU1120G9K dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsyde:bvrF.25:bd02/18/2011:svnHewlett-Packard:pnHPTouchSmarttm2NotebookPC:pvr058722242A2220100:rvnHewlett-Packard:rn1486:rvr83.20:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP TouchSmart tm2 Notebook PC dmi.product.version: 058722242A2220100 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1168224/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1212455] Re: 8086:2562 Flash 11.2 content displays in shades of green and purple only, and in a horizontally compressed space
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1212455 Title: 8086:2562 Flash 11.2 content displays in shades of green and purple only, and in a horizontally compressed space Status in “linux” package in Ubuntu: Incomplete Bug description: In my testing with the Intel driver using its default acceleration, what works: - Flash 11.2 works on Quantal with the 3.5 kernel - Flash 11.2 works on Raring with the 3.5.0-17 kernel (though it boots to a low-res desktop with a frozen pointer) - Flash 11.2 works on Raring also with the 3.6.11-030611 or 3.7.10-030710 mainline kernels - Flash 11.2 works on Raring with the 3.8 kernel (in Chrome) what fails: - Flash 11.2 fails on Raring with the 3.8 kernel - Flash 11.2 fails on Raring with the latest mainline kernel, 3.11.0-031100rc5 - Flash 11.2 fails on Saucy alpha 2 with its default kernel Disabling Flash *hardware* acceleration altogether (via R-click in the Flash display window: Settings: General tab) did not fix the problem. WORKAROUND: Setting the Intel driver's acceleration method to UXA rather than its default SNA *always* fixes the Flash problem, but causes a garbled login screen under LightDM that so far has no workaround. I also tried one possible fix for the default Intel SNA acceleration using the TearFree option. I created /etc/X11/xorg.conf.d/20-intel.conf with contents: Section "Device" Identifier "Intel Graphics" Driver "intel" Option "AccelMethod" "sna" Option "TearFree""true" EndSection But this had no effect. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-27-generic 3.8.0-27.40 ProcVersionSignature: Ubuntu 3.8.0-27.40-generic 3.8.13.4 Uname: Linux 3.8.0-27-generic i686 ApportVersion: 2.9.2-0ubuntu8.3 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: user1 1467 F lxpanel CRDA: Error: [Errno 2] No such file or directory: 'iw' CurrentDmesg: [ 72.390428] serial8250: too much work for irq17 [ 72.401696] serial8250: too much work for irq17 [ 72.411724] serial8250: too much work for irq17 [ 82.046726] serial8250: too much work for irq17 Date: Wed Aug 14 17:39:10 2013 HibernationDevice: RESUME=UUID=8adf1633-c1a8-4392-8fc3-44369bc85692 IwConfig: lono wireless extensions. eth0 no wireless extensions. Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: Dell Computer Corporation Dimension 2400 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-27-generic root=UUID=a41f2f68-7642-46f9-88d8-08a656c1c40d ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.8.0-27-generic N/A linux-backports-modules-3.8.0-27-generic N/A linux-firmware1.106 RfKill: SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/02/2003 dmi.bios.vendor: Dell Computer Corporation dmi.bios.version: A05 dmi.board.name: 0F5949 dmi.board.vendor: Dell Computer Corp. dmi.board.version: A01 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Computer Corporation dmi.modalias: dmi:bvnDellComputerCorporation:bvrA05:bd12/02/2003:svnDellComputerCorporation:pnDimension2400:pvr:rvnDellComputerCorp.:rn0F5949:rvrA01:cvnDellComputerCorporation:ct15:cvr: dmi.product.name: Dimension 2400 dmi.sys.vendor: Dell Computer Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1212455/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to
[Kernel-packages] [Bug 1202994] Re: EXT4 filesystem corruption with uninit_bg and error=continue
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1202994 Title: EXT4 filesystem corruption with uninit_bg and error=continue Status in “linux” package in Ubuntu: Incomplete Bug description: There was a long and complicated sequence of activities involving mdadm, lvm, and specifically pvmove leading up to the point where the corruption was discovered, but I suspect most were irrelevant. AFAICT, the bug was triggered by the following simple operations: * the FS was unmounted & remounted -- thus, the journal was fresh and hadn't wrapped (which other reports appear to indicate would have prevented the bug showing up) * the FS options include uninit_bg AND error=continue * a bunch of files were then copied onto the FS -- this was the last write operation on the FS. Later, e2fsck indicated a bunch of problems, including corrupted group descriptors. Specifically, it fould that many blocks were now claimed by two files; in each case, one was an old file and one was one of those newly copied, and the contents matched the expected data for latter. So I think this starts with an instance of the miscalculation of checksums in uninit_bg blocks (fixed by Ted Ts'o last June), followed by the (invalid or uninitialised) bitmap being used anyway (because error=continue) and the blocks it appeared to show as free then being allocated to new files. Jul 15 18:01:03 redshift kernel: [ 9332.021245] EXT4-fs error (device dm-1): ext4_mb_generate_buddy:739: group 2968, 8105 clusters in bitmap, 0 in gd ... Jul 16 18:05:14 redshift kernel: [95982.560034] EXT4-fs (dm-1): error count: 1 Jul 16 18:05:14 redshift kernel: [95982.560044] EXT4-fs (dm-1): initial error at 1373907663: ext4_mb_generate_buddy:739 Jul 16 18:05:14 redshift kernel: [95982.560053] EXT4-fs (dm-1): last error at 1373907663: ext4_mb_generate_buddy:739 ... Jul 16 20:53:19 redshift kernel: [106068.077526] EXT4-fs (dm-1): ext4_check_descriptors: Checksum for group 0 failed (47831!=4825) Jul 16 20:53:19 redshift kernel: [106068.077540] EXT4-fs (dm-1): ext4_check_descriptors: Checksum for group 1 failed (14670!=8882) I see that in an astonishing display of synchronicity, Darrick J Wong filed a patch at 17 Jul 2013 04:02 -- the very next day, or maybe even the same day, depending on timezone -- to prevent the knockon effects (see "[PATCH] ext4: Prevent massive fs corruption if verifying the block bitmap fails" at http://permalink.gmane.org/gmane.comp.file- systems.ext4/39535 ). But what puzzles me is that the initial triggering bug is still in this kernel (vmlinuz-3.2.0-49-generic), when according to this conversation https://bugzilla.kernel.org/show_bug.cgi?id=42723#c8 the fix was backported to 3.2.20? Is it possible that there is another way of getting the "ext4_mb_generate_buddy:739" error? I have kept an e2image dump of the corrupted FS in case it's of any use to EXT4 developers, but it's not attached, as even in QCOW2 format it's ~1Gb. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-49-generic 3.2.0-49.75 ProcVersionSignature: Ubuntu 3.2.0-49.75-generic 3.2.46 Uname: Linux 3.2.0-49-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: dsg7005 F pulseaudio /dev/snd/controlC0: dsg7005 F pulseaudio CRDA: country AW: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20) (5250 - 5330 @ 40), (N/A, 20), DFS (5490 - 5710 @ 40), (N/A, 27), DFS Card0.Amixer.info: Card hw:0 'SB'/'HDA ATI SB at 0xfe024000 irq 16' Mixer name : 'Realtek ALC892' Components : 'HDA:10ec0892,1458a102,00100302' Controls : 46 Simple ctrls : 21 Card1.Amixer.info: Card hw:1 'HDMI'/'HD
[Kernel-packages] [Bug 1041270] Re: /proc/acpi/button/lid/*/state always says "open" again in 12.04
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1041270 Title: /proc/acpi/button/lid/*/state always says "open" again in 12.04 Status in “linux” package in Ubuntu: Incomplete Bug description: acpi_listen does not detect any activity when the lid button is pushed, in 10.04 and in 12.04. For me (HP NC6320) status of the button is in /proc/acpi/video/C083/DOS I fixed this bug in 10.04 Lucid, by putting the following lines (both needed, in this order!) into /etc/rc.local echo 1 > /proc/acpi/video/C083/DOS echo 0 > /proc/acpi/video/C083/DOS However, after dist-upgrade to 12.04.1 this trick does not work anymore. --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu12 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 16077 F pulseaudio CRDA: country NL: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20), NO-OUTDOOR (5250 - 5330 @ 40), (N/A, 20), NO-OUTDOOR, DFS (5490 - 5710 @ 40), (N/A, 27), DFS Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xe858 irq 44' Mixer name : 'Analog Devices AD1981' Components : 'HDA:11d41981,103c30aa,00100200 HDA:11c13026,103c30aa,00100700' Controls : 13 Simple ctrls : 11 DistroRelease: Ubuntu 12.04 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=c3a28d8c-5e3b-4d96-813f- InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100427.1) MachineType: Hewlett-Packard HP Compaq nc6320 (RH569ET#ABH) Package: linux (not installed) PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-29-generic root=UUID=076b5014-92fe-40b3-974b- ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.2.0-29.46-generic 3.2.24 RelatedPackageVersions: linux-restricted-modules-3.2.0-29-generic N/A linux-backports-modules-3.2.0-29-generic N/A linux-firmware1.79 Tags: precise running-unity Uname: Linux 3.2.0-29-generic i686 UpgradeStatus: Upgraded to precise on 2012-08-24 (0 days ago) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 04/17/2007 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68YDU Ver. F.0D dmi.board.name: 30AA dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 58.12 dmi.chassis.asset.tag: CNU7352T5G dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68YDUVer.F.0D:bd04/17/2007:svnHewlett-Packard:pnHPCompaqnc6320(RH569ET#ABH):pvrF.0D:rvnHewlett-Packard:rn30AA:rvrKBCVersion58.12:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP Compaq nc6320 (RH569ET#ABH) dmi.product.version: F.0D dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.10.2-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4650 F pulseaudio CRDA: country NL: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20), NO-OUTDOOR (5250 - 5330 @ 40), (N/A, 20), NO-OUTDOOR, DFS (5490 - 5710 @ 40), (N/A, 27), DFS CasperVersion: 1.333 DistroRelease: Ubuntu 13.10 LiveMediaBuild: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130616) MachineType: Hewlett-Packard HP Compaq nc6320 (RH569ET#ABH) MarkForUpload: True Package: linux (not installed) PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcFB: 0 inteldrmfb ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.9.0-6.13-generic 3.9.6 RelatedPackageVersions: linux-restricted-modules-3.9.0-6-generic N/A
[Kernel-packages] [Bug 1212977] Re: saucy daily-live images are unbootable on Dell Optiplex 990; stuck in BusyBox shell
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1212977 Title: saucy daily-live images are unbootable on Dell Optiplex 990; stuck in BusyBox shell Status in “casper” package in Ubuntu: Invalid Status in “linux” package in Ubuntu: Incomplete Status in “udev” package in Ubuntu: Confirmed Status in “casper” source package in Saucy: Invalid Status in “linux” source package in Saucy: Incomplete Status in “udev” source package in Saucy: Confirmed Bug description: saucy daily-live images are unbootable on Dell Optiplex 990. I just get a BusyBox shell. I have tried the latest live images for the past few days without any luck. And the bug persists regardless of which graphics card (or none) I have in. Tried at least: http://cdimage.ubuntu.com/daily-live/20130814/ http://cdimage.ubuntu.com/daily-live/20130815/ and the Optiplex 990 cannot boot them. Interestingly, the same USB images do boot successfully on a Thinkpad X220. --- ApportVersion: 2.9.2-0ubuntu8.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: dan2083 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=9e3dac8a-8fa4-4da5-b4d2-52b2ee5fd022 InstallationDate: Installed on 2013-06-03 (76 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) IwConfig: eth0 no wireless extensions. lono wireless extensions. MachineType: Dell Inc. OptiPlex 990 MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-25-generic root=UUID=416f5f80-6d98-4208-a3f5-ef272b12e5c6 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-25.37-generic 3.8.13 RelatedPackageVersions: linux-restricted-modules-3.8.0-25-generic N/A linux-backports-modules-3.8.0-25-generic N/A linux-firmware1.106 RfKill: Tags: raring Uname: Linux 3.8.0-25-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 09/10/2011 dmi.bios.vendor: Dell Inc. dmi.bios.version: A07 dmi.board.name: 0D6H9T dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvrA07:bd09/10/2011:svnDellInc.:pnOptiPlex990:pvr01:rvnDellInc.:rn0D6H9T:rvrA00:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 990 dmi.product.version: 01 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/casper/+bug/1212977/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1207955] Re: omapdss HDMI error
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1207955 Title: omapdss HDMI error Status in “linux” package in Ubuntu: Incomplete Bug description: Using the past few Ubuntu 13.10 daily images, installation seemingly goes fine, it reboots onto the Ubuntu login display. Upon attempting to login, the screen turns black, never loading the desktop. Switching to console, I saw the following error at the login prompt from the kernel. Aug 3 00:12:21 saucy-omap4 kernel: [2.441223] omapdss HDMI error: failed to enable GPIO's PandaBoard ES HDMI connected to LCD TV 1.) Boot Ubuntu 2.) Arrive at Ubuntu GDM login prompt 3.) Successful authentication 4.) Black Screen, mouse cursor Doesn't go any further. --- ApportVersion: 2.11-0ubuntu1 Architecture: armhf AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/seq', '/dev/snd/controlC1', '/dev/snd/pcmC1D0p', '/dev/snd/controlC0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/pcmC0D1c', '/dev/snd/pcmC0D2c', '/dev/snd/pcmC0D2p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D4p', '/dev/snd/pcmC0D5c', '/dev/snd/pcmC0D5p', '/dev/snd/pcmC0D6p', '/dev/snd/pcmC0D8c', '/dev/snd/pcmC0D8p', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 13.10 InstallationDate: Installed on 2013-08-03 (0 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha armhf+omap4 (20130802) MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) SHELL=/bin/bash ProcFB: 0 omapdrm ProcKernelCmdLine: ro quiet splash root=UUID=b3d8fd5e-a51a-45a8-a445-b7243f4f5ae3 ProcVersionSignature: Ubuntu 3.5.0-229.42-omap4 3.5.7.16 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.5.0-229-omap4 N/A linux-backports-modules-3.5.0-229-omap4 N/A linux-firmware 1.112 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: saucy Uname: Linux 3.5.0-229-omap4 armv7l UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1207955/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1215813] Re: [Microsoft Corporation Surface with Windows 8 Pro] suspend/resume failure
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1215813 Title: [Microsoft Corporation Surface with Windows 8 Pro] suspend/resume failure Status in “linux” package in Ubuntu: Incomplete Bug description: Unable to wake up from sleep. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-3-generic 3.11.0-3.7~lp1212720v1 ProcVersionSignature: Ubuntu 3.11.0-3.7-generic 3.11.0-rc6 Uname: Linux 3.11.0-3-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: thariman 1603 F pulseaudio Date: Fri Aug 23 15:32:03 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=e26dcbb3-d727-4eeb-baca-d2c60e5a4eb3 InstallationDate: Installed on 2013-08-23 (0 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130822) InterpreterPath: /usr/bin/python3.3 MachineType: Microsoft Corporation Surface with Windows 8 Pro MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-3-generic.efi.signed root=UUID=66cd76a3-0f05-45ea-94bd-83958f7aae13 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.11.0-3-generic N/A linux-backports-modules-3.11.0-3-generic N/A linux-firmware1.113 SourcePackage: linux Title: [Microsoft Corporation Surface with Windows 8 Pro] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 07/04/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.04.0350 dmi.board.asset.tag: 0 dmi.board.name: Surface with Windows 8 Pro dmi.board.vendor: Microsoft Corporation dmi.board.version: 1 dmi.chassis.asset.tag: 0 dmi.chassis.type: 17 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 1 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.04.0350:bd07/04/2013:svnMicrosoftCorporation:pnSurfacewithWindows8Pro:pvr1:rvnMicrosoftCorporation:rnSurfacewithWindows8Pro:rvr1:cvnMicrosoftCorporation:ct17:cvr1: dmi.product.name: Surface with Windows 8 Pro dmi.product.version: 1 dmi.sys.vendor: Microsoft Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1215813/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1215456] Re: autopilot intel machine hw
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1215456 Title: autopilot intel machine hw Status in “linux” package in Ubuntu: Incomplete Bug description: autopilot intel saucy machine hw for the kernel guys ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-3-generic 3.11.0-3.7 ProcVersionSignature: Ubuntu 3.11.0-3.7-generic 3.11.0-rc6 Uname: Linux 3.11.0-3-generic i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-3-generic. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.12.1-0ubuntu2 Architecture: i386 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D1', '/dev/snd/hwC0D3', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/pcmC0D1p', '/dev/snd/pcmC0D2c', '/dev/snd/pcmC0D3p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory: 'iw' Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' Date: Thu Aug 22 14:00:56 2013 HibernationDevice: RESUME=UUID=2debaec2-044d-40c2-b9c6-b752e4cfcaeb IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' MachineType: MSI MS-7676 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-3-generic root=UUID=799cc1fa-a6a5-4b80-82bc-ded29c93ac77 ro quiet swapaccount=1 RelatedPackageVersions: linux-restricted-modules-3.11.0-3-generic N/A linux-backports-modules-3.11.0-3-generic N/A linux-firmware1.113 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to saucy on 2013-06-04 (79 days ago) dmi.bios.date: 05/04/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: V10.2 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Z68MA-ED55 (MS-7676) dmi.board.vendor: MSI dmi.board.version: 2.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: MSI dmi.chassis.version: 2.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrV10.2:bd05/04/2011:svnMSI:pnMS-7676:pvr2.0:rvnMSI:rnZ68MA-ED55(MS-7676):rvr2.0:cvnMSI:ct3:cvr2.0: dmi.product.name: MS-7676 dmi.product.version: 2.0 dmi.sys.vendor: MSI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1215456/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1216422] Re: [Acer Aspire One 725] Touchpad not working
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1216422 Title: [Acer Aspire One 725] Touchpad not working Status in “linux” package in Ubuntu: Incomplete Bug description: Touchpad will not work out of the box on this netbook. This is a regression from Oneiric to Precise+. a)WORKAROUND: Pushing Fn+F7 before login or b)WORKAROUND: Pushing Alt+Fn+F7 or Ctr+Fn+F7 after login makes the touchpad working. After reboot, I have to repeat a) or b) to get touchpad working again. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-3-generic 3.11.0-3.7 ProcVersionSignature: Ubuntu 3.11.0-3.7-generic 3.11.0-rc6 Uname: Linux 3.11.0-3-generic x86_64 ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2749 F pulseaudio ubuntu 4053 F pulseaudio /dev/snd/controlC0: ubuntu 2749 F pulseaudio ubuntu 4053 F pulseaudio CasperVersion: 1.336 Date: Sat Aug 24 21:01:43 2013 LiveMediaBuild: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130822) MachineType: Acer AO725 MarkForUpload: True ProcFB: 0 radeondrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper quiet splash -- BOOT_IMAGE=/casper/vmlinuz.efi RelatedPackageVersions: linux-restricted-modules-3.11.0-3-generic N/A linux-backports-modules-3.11.0-3-generic N/A linux-firmware1.113 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/18/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.07 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: ZA10_BZ dmi.board.vendor: Acer dmi.board.version: Base Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.07:bd04/18/2013:svnAcer:pnAO725:pvrV1.07:rvnAcer:rnZA10_BZ:rvrBaseBoardVersion:cvnChassisManufacturer:ct10:cvrChassisVersion: dmi.product.name: AO725 dmi.product.version: V1.07 dmi.sys.vendor: Acer --- ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ubuntu 2773 F pulseaudio /dev/snd/controlC0: ubuntu 2773 F pulseaudio CasperVersion: 1.336 DistroRelease: Ubuntu 13.10 LiveMediaBuild: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130827) MachineType: Acer AO725 MarkForUpload: True Package: linux (not installed) ProcEnviron: LANGUAGE=en_US TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/hostname.seed boot=casper quiet splash -- BOOT_IMAGE=/casper/vmlinuz.efi ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-4-generic N/A linux-backports-modules-3.11.0-4-generic N/A linux-firmware1.113 Tags: saucy Uname: Linux 3.11.0-4-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 04/18/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.07 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: ZA10_BZ dmi.board.vendor: Acer dmi.board.version: Base Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Chassis Manufacturer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.07:bd04/18/2013:svnAcer:pnAO725:pvrV1.07:rvnAcer:rnZA10_BZ:rvrBaseBoardVersion:cvnChassisManufacturer:ct
[Kernel-packages] [Bug 1216186] Re: Elantech touchpad moves and clicks by itself
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1216186 Title: Elantech touchpad moves and clicks by itself Status in “linux” package in Ubuntu: Incomplete Bug description: I am facing a very annoying hardware problem. It's so bad tha it makes hard even to report it: the mouse (touchpad in this case) keeps moving to the left side of the screen and clicking by itself. So all the programs on the Unity sidebar are keept being opened until the system gets without memory and very slow. Since the hardware is a relatively new ultrabook, I tought a newer kernel could had solve this issue, so I upgrade to saucy. Everything worked well after the first boot which followed the upgrade but after rebooting again the same thing started to happen. That's the device ID given by lsusb command: Bus 003 Device 003: ID 04f3:0035 Elan Microelectronics Corp. I also thought it could be a problem with the touchscreen, but dmesg gives me a lot of error messages for the touchpad, with seems to be recognized as a psmouse. Installing gpointing-device-settings package and openning the config tool shows no touchpad related options. ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-generic 3.11.0.3.4 ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5 Uname: Linux 3.11.0-2-generic x86_64 ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kemel 1825 F pulseaudio kemel 3109 F pulseaudio Date: Fri Aug 23 23:35:13 2013 HibernationDevice: RESUME=UUID=45d838ad-e4f4-4fb6-a6d5-e0cc1be17b2a InstallationDate: Installed on 2013-05-12 (103 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MachineType: TSINGHUA TONGFANG CO.,LTD X46F MarkForUpload: True ProcEnviron: LANGUAGE=pt_BR:pt:en TERM=xterm PATH=(custom, no user) LANG=pt_BR.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-2-generic root=UUID=7b9ffde6-ffed-440e-935e-454db7cdb1ba ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-2-generic N/A linux-backports-modules-3.11.0-2-generic N/A linux-firmware1.113 SourcePackage: linux UpgradeStatus: Upgraded to saucy on 2013-08-19 (5 days ago) dmi.bios.date: 07/03/2012 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: 65C dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: X46F dmi.board.vendor: TSINGHUA TONGFANG CO.,LTD dmi.board.version: FAB1 dmi.chassis.asset.tag: Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: Intel Corporation dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvr65C:bd07/03/2012:svnTSINGHUATONGFANGCO.,LTD:pnX46F:pvr0.1:rvnTSINGHUATONGFANGCO.,LTD:rnX46F:rvrFAB1:cvnIntelCorporation:ct9:cvr0.1: dmi.product.name: X46F dmi.product.version: 0.1 dmi.sys.vendor: TSINGHUA TONGFANG CO.,LTD To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1216186/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1215922] Re: [Microsoft Corporation Surface with Windows 8 Pro] hibernate/resume failure
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1215922 Title: [Microsoft Corporation Surface with Windows 8 Pro] hibernate/resume failure Status in “linux” package in Ubuntu: Incomplete Bug description: Unable to hibernate test using sudo pm-hibernate. Stuck screen off but still not off. ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-3-generic 3.11.0-3.7~lp1212720v1 ProcVersionSignature: Ubuntu 3.11.0-3.7-generic 3.11.0-rc6 Uname: Linux 3.11.0-3-generic x86_64 Annotation: This occured during a previous hibernate and prevented it from resuming properly. ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: thariman 1752 F pulseaudio Date: Fri Aug 23 20:10:03 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: hibernate/resume HibernationDevice: RESUME=UUID=58fe7ee3-9d91-462f-99b4-c60406d124c9 InstallationDate: Installed on 2013-08-23 (0 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130822) InterpreterPath: /usr/bin/python3.3 MachineType: Microsoft Corporation Surface with Windows 8 Pro MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-3-generic.efi.signed root=UUID=76f78d09-0b4c-40cd-a12f-a36e4817e051 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.11.0-3-generic N/A linux-backports-modules-3.11.0-3-generic N/A linux-firmware1.113 SourcePackage: linux Title: [Microsoft Corporation Surface with Windows 8 Pro] hibernate/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 07/04/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.04.0350 dmi.board.asset.tag: 0 dmi.board.name: Surface with Windows 8 Pro dmi.board.vendor: Microsoft Corporation dmi.board.version: 1 dmi.chassis.asset.tag: 0 dmi.chassis.type: 17 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 1 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.04.0350:bd07/04/2013:svnMicrosoftCorporation:pnSurfacewithWindows8Pro:pvr1:rvnMicrosoftCorporation:rnSurfacewithWindows8Pro:rvr1:cvnMicrosoftCorporation:ct17:cvr1: dmi.product.name: Surface with Windows 8 Pro dmi.product.version: 1 dmi.sys.vendor: Microsoft Corporation --- ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: thariman 1786 F pulseaudio DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=58fe7ee3-9d91-462f-99b4-c60406d124c9 InstallationDate: Installed on 2013-08-24 (2 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130822) MachineType: Microsoft Corporation Surface with Windows 8 Pro MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic root=UUID=37b9d484-211b-47ca-b9e7-fd1903f1e30a ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-4-generic N/A linux-backports-modules-3.11.0-4-generic N/A linux-firmware1.113 Tags: saucy Uname: Linux 3.11.0-4-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 07/04/2013
[Kernel-packages] [Bug 1217160] Re: [Microsoft Corporation Surface Pro] suspend/resume failure
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1217160 Title: [Microsoft Corporation Surface Pro] suspend/resume failure Status in “linux” package in Ubuntu: Incomplete Bug description: doing sudo pm-suspend it blank the screen but still not turning the power off see bug# 1215813 ProblemType: KernelOops DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-4-generic 3.11.0-4.9 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic x86_64 Annotation: This occured during a previous suspend and prevented it from resuming properly. ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: thariman 1619 F pulseaudio Date: Tue Aug 27 08:43:35 2013 ExecutablePath: /usr/share/apport/apportcheckresume Failure: suspend/resume HibernationDevice: RESUME=UUID=58fe7ee3-9d91-462f-99b4-c60406d124c9 InstallationDate: Installed on 2013-08-24 (2 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130822) InterpreterPath: /usr/bin/python3.3 MachineType: Microsoft Corporation Surface with Windows 8 Pro MarkForUpload: True ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume ProcEnviron: TERM=linux PATH=(custom, no user) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic root=UUID=37b9d484-211b-47ca-b9e7-fd1903f1e30a ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding. RelatedPackageVersions: linux-restricted-modules-3.11.0-4-generic N/A linux-backports-modules-3.11.0-4-generic N/A linux-firmware1.113 SourcePackage: linux Title: [Microsoft Corporation Surface with Windows 8 Pro] suspend/resume failure UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: dmi.bios.date: 07/04/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1.04.0350 dmi.board.asset.tag: 0 dmi.board.name: Surface with Windows 8 Pro dmi.board.vendor: Microsoft Corporation dmi.board.version: 1 dmi.chassis.asset.tag: 0 dmi.chassis.type: 17 dmi.chassis.vendor: Microsoft Corporation dmi.chassis.version: 1 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.04.0350:bd07/04/2013:svnMicrosoftCorporation:pnSurfacewithWindows8Pro:pvr1:rvnMicrosoftCorporation:rnSurfacewithWindows8Pro:rvr1:cvnMicrosoftCorporation:ct17:cvr1: dmi.product.name: Surface with Windows 8 Pro dmi.product.version: 1 dmi.sys.vendor: Microsoft Corporation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1217160/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1218973] Re: XPS 12-9Q33 touchpad not recognized
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1218973 Title: XPS 12-9Q33 touchpad not recognized Status in “linux” package in Ubuntu: Incomplete Bug description: With the new XPS 12 (haswell), the touchpad gets detected as "PS/2 Generic Mouse". ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-4-generic 3.11.0-4.9 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic x86_64 ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: oli1862 F pulseaudio /dev/snd/controlC0: oli1862 F pulseaudio Date: Fri Aug 30 17:03:26 2013 HibernationDevice: RESUME=UUID=6d351a70-8a00-4f2c-a48d-a79cb070a939 InstallationDate: Installed on 2013-08-25 (4 days ago) InstallationMedia: Ubuntu-GNOME 13.10 "Saucy Salamander" - Alpha amd64 (20130825) MachineType: Dell Inc. XPS 12-9Q33 MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic.efi.signed root=UUID=5d13cb7e-817c-4234-b758-0d79e4eade0b ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.11.0-4-generic N/A linux-backports-modules-3.11.0-4-generic N/A linux-firmware1.113 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/26/2013 dmi.bios.vendor: Dell Inc. dmi.bios.version: A02 dmi.board.name: XPS 12-9Q33 dmi.board.vendor: Dell Inc. dmi.board.version: A02 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: Not Specified dmi.modalias: dmi:bvnDellInc.:bvrA02:bd07/26/2013:svnDellInc.:pnXPS12-9Q33:pvrA02:rvnDellInc.:rnXPS12-9Q33:rvrA02:cvnDellInc.:ct8:cvrNotSpecified: dmi.product.name: XPS 12-9Q33 dmi.product.version: A02 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1218973/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1218753] Re: [HP 4520S, 3.11 regression] Keyboard stops working after S3
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1218753 Title: [HP 4520S, 3.11 regression] Keyboard stops working after S3 Status in “linux” package in Ubuntu: Incomplete Bug description: After S3 on this laptop, the keyboard is completely non-responsive. (E g, Ctrl-Alt-F1 does not work) The trackpad is still working though. I believe this is a kernel problem because 1) It started happening recently, i e, it was not a problem when running with a 3.10 kernel. 2) I can't find *any* keys working, not even magic keys (REISUB) ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-3-generic 3.11.0-3.6 ProcVersionSignature: Ubuntu 3.11.0-3.6-generic 3.11.0-rc6 Uname: Linux 3.11.0-3-generic x86_64 ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/hwC0D3', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/pcmC0D3p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: Date: Fri Aug 30 08:35:47 2013 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=fa2ccdc6-c068-4438-8815-593002a38c7e InstallationDate: Installed on 2013-05-08 (113 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130508) MachineType: Hewlett-Packard HP ProBook 4520s MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-3-generic root=UUID=a5d6e01c-ed1a-49a2-934c-271f53d20520 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.11.0-3-generic N/A linux-backports-modules-3.11.0-3-generic N/A linux-firmware1.113 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/29/2010 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68AZZ Ver. F.08 dmi.board.name: 1413 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 57.1D dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68AZZVer.F.08:bd06/29/2010:svnHewlett-Packard:pnHPProBook4520s:pvr:rvnHewlett-Packard:rn1413:rvrKBCVersion57.1D:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP ProBook 4520s dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1218753/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1216583] Re: Sandisk ExtremePro 32GB not readable in Acer Aspire V3-571G
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1216583 Title: Sandisk ExtremePro 32GB not readable in Acer Aspire V3-571G Status in “linux” package in Ubuntu: Incomplete Bug description: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1101883?comments=all my posting: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1101883/comments/32 ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.5.0-39-generic 3.5.0-39.60~precise1 ProcVersionSignature: Ubuntu 3.5.0-39.60~precise1-generic 3.5.7.17 Uname: Linux 3.5.0-39-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.25. ApportVersion: 2.0.1-0ubuntu17.4 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: muede 1817 F pulseaudio CRDA: country DE: (2400 - 2483 @ 40), (N/A, 20) (5150 - 5250 @ 40), (N/A, 20), NO-OUTDOOR (5250 - 5350 @ 40), (N/A, 20), NO-OUTDOOR, DFS (5470 - 5725 @ 40), (N/A, 26), DFS Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xb361 irq 45' Mixer name : 'Intel PantherPoint HDMI' Components : 'HDA:10ec0269,10250647,00100100 HDA:80862806,80860101,0010' Controls : 29 Simple ctrls : 13 Date: Sun Aug 25 15:50:34 2013 HibernationDevice: RESUME=UUID=a139e692-0327-4f65-9a51-256cdcb1681e InstallationMedia: Ubuntu 12.04.2 LTS "Precise Pangolin" - Release amd64 (20130213) MachineType: Acer Aspire V3-571G MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-39-generic root=UUID=85259d26-9563-45e4-a36f-8f6c19ac62aa ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.5.0-39-generic N/A linux-backports-modules-3.5.0-39-generic N/A linux-firmware1.79.6 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/25/2012 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.11 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: VA50_HC_CR dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Insyde Corp. dmi.chassis.version: V2.11 dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.11:bd12/25/2012:svnAcer:pnAspireV3-571G:pvrV2.11:rvnAcer:rnVA50_HC_CR:rvrType2-BoardVersion:cvnInsydeCorp.:ct10:cvrV2.11: dmi.product.name: Aspire V3-571G dmi.product.version: V2.11 dmi.sys.vendor: Acer --- ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 2816 F pulseaudio ubuntu 4677 F pulseaudio CasperVersion: 1.336 DistroRelease: Ubuntu 13.10 LiveMediaBuild: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130827) MachineType: Acer Aspire V3-571G MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 RelatedPackageVersions: linux-restricted-modules-3.11.0-4-generic N/A linux-backports-modules-3.11.0-4-generic N/A linux-firmware1.113 Tags: saucy Uname: Linux 3.11.0-4-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 03/11/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.15 dmi.board.asset.tag: Type2 - B
[Kernel-packages] [Bug 837076] Re: 8086:422b [iwlwifi] Intel Centrino Ultimate-N 6300 AGN and packet loss
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/837076 Title: 8086:422b [iwlwifi] Intel Centrino Ultimate-N 6300 AGN and packet loss Status in “linux” package in Ubuntu: Incomplete Status in “linux” source package in Saucy: Incomplete Bug description: Hi, I have recently swapped the internal WiFi adapter with an Ultimate-N 6300 and I'm seeing a lot of packet loss. Some additional info is as follows: wlan1 IEEE 802.11abgn ESSID:"star-local" Mode:Managed Frequency:2.412 GHz Access Point: 00:22:75:29:EC:61 Bit Rate=121.5 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=49/70 Signal level=-61 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:205 Invalid misc:5 Missed beacon:0 $ ping -c 20 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=3.83 ms 64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=2.56 ms 64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=2.59 ms 64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=2.57 ms 64 bytes from 192.168.2.1: icmp_req=5 ttl=64 time=3.23 ms 64 bytes from 192.168.2.1: icmp_req=6 ttl=64 time=3.13 ms 64 bytes from 192.168.2.1: icmp_req=7 ttl=64 time=4.04 ms 64 bytes from 192.168.2.1: icmp_req=11 ttl=64 time=3.89 ms 64 bytes from 192.168.2.1: icmp_req=12 ttl=64 time=3.80 ms 64 bytes from 192.168.2.1: icmp_req=13 ttl=64 time=82.4 ms 64 bytes from 192.168.2.1: icmp_req=14 ttl=64 time=105 ms 64 bytes from 192.168.2.1: icmp_req=15 ttl=64 time=2.57 ms 64 bytes from 192.168.2.1: icmp_req=16 ttl=64 time=2.97 ms 64 bytes from 192.168.2.1: icmp_req=17 ttl=64 time=2.57 ms 64 bytes from 192.168.2.1: icmp_req=18 ttl=64 time=2.57 ms 64 bytes from 192.168.2.1: icmp_req=19 ttl=64 time=3.94 ms 64 bytes from 192.168.2.1: icmp_req=20 ttl=64 time=3.51 ms --- 192.168.2.1 ping statistics --- 20 packets transmitted, 17 received, 15% packet loss, time 19028ms rtt min/avg/max/mdev = 2.567/13.879/105.633/29.547 ms [ 5677.146495] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 5677.146504] iwlagn: Copyright(c) 2003-2011 Intel Corporation [ 5677.146662] iwlagn :01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5677.146734] iwlagn :01:00.0: setting latency timer to 64 [ 5677.146841] iwlagn :01:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 [ 5677.164555] iwlagn :01:00.0: device EEPROM VER=0x436, CALIB=0x6 [ 5677.164562] iwlagn :01:00.0: Device SKU: 0Xb [ 5677.164566] iwlagn :01:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 [ 5677.164650] iwlagn :01:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 5677.165072] iwlagn :01:00.0: irq 46 for MSI/MSI-X [ 5677.168745] iwlagn :01:00.0: loaded firmware version 9.221.4.1 build 25532 [ 5677.169561] Registered led device: phy6-led [ 5677.169644] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 5677.170079] ieee80211 phy6: Selected rate control algorithm 'iwl-agn-rs' [ 5677.221260] udevd[11216]: renamed network interface wlan0 to wlan1 [ 5677.640171] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 5685.467019] wlan1: authenticate with 00:22:75:29:ec:61 (try 1) [ 5685.469706] wlan1: authenticated [ 5685.470195] wlan1: associate with 00:22:75:29:ec:61 (try 1) [ 5685.662167] wlan1: associate with 00:22:75:29:ec:61 (try 2) [ 5685.666099] wlan1: RX AssocResp from 00:22:75:29:ec:61 (capab=0x411 status=0 aid=1) [ 5685.666110] wlan1: associated [ 5685.680357] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 5685.680483] cfg80211: Calling CRDA for country: US [ 5685.689341] cfg80211: Updating information on frequency 2412 MHz for a 2
[Kernel-packages] [Bug 996369] Re: bond slave interface sometimes does not come up on boot
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/996369 Title: bond slave interface sometimes does not come up on boot Status in “linux” package in Ubuntu: Incomplete Status in “linux” source package in Precise: Confirmed Status in “linux” source package in Quantal: Confirmed Status in “linux” source package in Raring: Confirmed Status in “linux” source package in Saucy: Incomplete Bug description: bug report: Hi guys, I'm running ubuntu12.04 server on a HP DL380G7. server01 ~ # lsb_release -rd Description: Ubuntu 12.04 LTS Release: 12.04 I've got 2 ethernet cards with 4x 10G interfaces. I've got a bond on 4x10G where only eth4 and eth6 are patched. server01 ~ # ethtool -i eth4 driver: be2net version: 4.0.100u firmware-version: 4.0.360.15 bus-info: :0e:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: no server01 ~ # ethtool -i eth6 driver: be2net version: 4.0.100u firmware-version: 4.0.360.15 bus-info: :15:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: no After a reboot I expect to see a bond0 interface with 2 RUNNING SLAVE interfaces. However, sometimes I only see 1 interface coming up in the bond after a reboot and when I manually bring the other interface up (ifconfig eth6 up) it works: # cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: slow Min links: 0 Aggregator selection policy (ad_select): stable Active Aggregator Info: Aggregator ID: 2 Number of ports: 1 Actor Key: 33 Partner Key: 32773 Partner Mac Address: 00:23:04:ee:be:01 Slave Interface: eth6 MII Status: down SHOULD BE UP Speed: 1 Mbps Duplex: full Link Failure Count: 1 Permanent HW addr: 00:9c:02:3c:c9:70 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth4 MII Status: up ONLY INTERFACE THAT IS UP Speed: 1 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:9c:02:3c:99:98 Aggregator ID: 2 Slave queue ID: 0 Slave Interface: eth7 MII Status: down Speed: Unknown Duplex: Unknown Link Failure Count: 0 Permanent HW addr: 00:9c:02:3c:c9:74 Aggregator ID: 3 Slave queue ID: 0 Slave Interface: eth5 MII Status: down Speed: Unknown Duplex: Unknown Link Failure Count: 0 Permanent HW addr: 00:9c:02:3c:99:9c Aggregator ID: 4 Slave queue ID: 0 server01 ~ # ifconfig bond0 Link encap:Ethernet HWaddr 00:9c:02:3c:c9:70 inet6 addr: fe80::29c:2ff:fe3c:c970/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:169071 errors:0 dropped:54 overruns:0 frame:0 TX packets:1236 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:18435358 (18.4 MB) TX bytes:174727 (174.7 KB) eth4 Link encap:Ethernet HWaddr 00:9c:02:3c:c9:70 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:169071 errors:0 dropped:45 overruns:0 frame:0 TX packets:1235 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:18435358 (18.4 MB) TX bytes:174637 (174.6 KB) eth5 Link encap:Ethernet HWaddr 00:9c:02:3c:c9:70 UP BROADCAST SLAVE MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth7 Link enc
[Kernel-packages] [Bug 1123403] Re: Installer is blocked by UEFI Secure Boot
Given the number of bugs that the Kernel Team receives during any development cycle it is impossible for us to review them all. Therefore, we occasionally resort to using automated bots to request further testing. This is such a request. We are approaching release and would like to confirm if this bug is still present. Please test again with the latest development kernel and indicate in the bug if this issue still exists or not. You can update to the latest development kernel by simply running the following commands in a terminal window: sudo apt-get update sudo apt-get dist-upgrade If the bug still exists, change the bug status from Incomplete to Confirmed. If the bug no longer exists, change the bug status from Incomplete to Fix Released. Thank you for your help, we really do appreciate it. ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete ** Tags added: kernel-request-3.11.0-7.14 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1123403 Title: Installer is blocked by UEFI Secure Boot Status in “linux” package in Ubuntu: Incomplete Status in “linux” source package in Saucy: Incomplete Bug description: The release notes for Ubuntu 12.10 claim [1] that UEFI Secure Boot is supported and suggest that I should expect an "it just works" experience on new hardware. However, when I try to boot an Ubuntu 12.10 64-bit bootable USB stick [2] on a brand-new Acer Aspire V5-171, the following message appears: 2. USB HDD: Memorex TD Classic 003C has been blocked by the current security policy. [Ok] I have confirmed that the USB stick boots without error when I enable the legacy BIOS boot mode on the computer's setup screen. [1]: https://wiki.ubuntu.com/QuantalQuetzal/ReleaseNotes/UbuntuDesktop#QuantalQuetzal.2BAC8-ReleaseNotes.2BAC8-CommonInfrastructure.Secure_Boot [2]: http://www.ubuntu.com/download/help/create-a-usb-stick-on-windows --- ApportVersion: 2.10.2-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 2977 F pulseaudio CasperVersion: 1.335 DistroRelease: Ubuntu 13.10 LiveMediaBuild: Ubuntu 13.10 "Saucy Salamander" - Alpha amd64 (20130627) MachineType: Acer V5-171 MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/username.seed boot=casper quiet splash -- ProcVersionSignature: Ubuntu 3.9.0-7.15-generic 3.9.7 RelatedPackageVersions: linux-restricted-modules-3.9.0-7-generic N/A linux-backports-modules-3.9.0-7-generic N/A linux-firmware 1.109 Tags: saucy Uname: Linux 3.9.0-7-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 12/12/2012 dmi.bios.vendor: Acer dmi.bios.version: V2.09 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Mimic dmi.board.vendor: Acer dmi.board.version: Type2 - Board Version dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V2.09 dmi.modalias: dmi:bvnAcer:bvrV2.09:bd12/12/2012:svnAcer:pnV5-171:pvrV2.09:rvnAcer:rnMimic:rvrType2-BoardVersion:cvnAcer:ct10:cvrV2.09: dmi.product.name: V5-171 dmi.product.version: V2.09 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1123403/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1218004] Re: Apple Wireless Trackpad causes kernel oops
You'd asked me via irc to test that kernel and it crashed when I tested it then (on the 17th). -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1218004 Title: Apple Wireless Trackpad causes kernel oops Status in “linux” package in Ubuntu: Confirmed Bug description: This seems to happen whenever I connect my Apple Wireless Trackpad and use it. The system hardlocks and I have to force a reboot. ProblemType: KernelOopsDistroRelease: Ubuntu 13.10 Package: linux-image-3.11.0-4-generic 3.11.0-4.9 ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7 Uname: Linux 3.11.0-4-generic x86_64 Annotation: Your system might become unstable now and might need to be restarted. ApportVersion: 2.12.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: bdmurray 2546 F pulseaudio /dev/snd/controlC0: bdmurray 2546 F pulseaudio Date: Wed Aug 28 10:16:41 2013 EcryptfsInUse: Yes Failure: oops HibernationDevice: RESUME=UUID=24b89185-eb5d-476c-ba6d-d71b78071334 InstallationDate: Installed on 2013-01-16 (224 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20130116) MachineType: System manufacturer System Product Name MarkForUpload: True OopsText: ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.11.0-4-generic root=/dev/mapper/ubuntu--vg-root ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7 RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-3ubuntu3 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: noSourcePackage: linux UpgradeStatus: Upgraded to saucy on 2013-07-15 (43 days ago) dmi.bios.date: 07/27/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1106 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P8Z77-V LX dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1106:bd07/27/2012:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnP8Z77-VLX:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1218004/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp