[Kernel-packages] [Bug 1556471] Re: Connecting an Osprey 2 Mini (USB cellular wireless router) sometimes causes an endless reset loop or a kernel panic

[ais523]

My email to the mailing list is archived here: http://marc.info/?l
=linux-usb=145812520514664=2

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1556471

Title:
  Connecting an Osprey 2 Mini (USB cellular wireless router) sometimes
  causes an endless reset loop or a kernel panic

Status in linux package in Ubuntu:
  Triaged

Bug description:
  Steps to reproduce (happens > 50% of the time, but not every time):

  Turn on an Osprey 2 Mini, and connect it to a USB port via a USB cable
  while both the device and computer are on (i.e. hotplug).

  Observed symptoms:
  - sometimes the Osprey 2 Mini goes into an endless reset loop (visible as the 
LEDs on the front of the device flashing rapidly), being reset approximately 
every 200ms; on such occasions, the Ubuntu user interface often reacts as 
though I'd inserted an audio CD containing corrupted data (e.g. via repeatedly 
adding an "Audio CD" icon to the launcher and then removing it, and putting up 
dialog boxes complaining about failure to read the data).
  - sometimes the kernel panics (often some time after the reset loop starts, 
perhaps up to 10 seconds); when this happens there was always or nearly always 
a reset loop occurring beforehand.
  - sometimes the device resets once or not at all, then works as expected 
(showing up as a network interface, and allowing me to communicate to the 
Internet with a wired connection); I'm currently using an Osprey 2 Mini for 
this purpose right now.

  The kernel panics lock up the entire system (forcing a hard power
  off). lt-Sysrq commands don't work in this state (even though I have
  them enabled), and sometimes the Caps Lock light flashes repeatedly.
  The logs end some time before the panic occurs.

  /var/log/syslog:
  
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1556471/+attachment/4598145/+files/syslog

  The reset loops also occurred when I was using Ubuntu vivid. The
  kernel panics only happened after an upgrade to wily. Output of lsusb
  -v is attached.

  ---
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ais523 6233 F pulseaudio
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 15.10
  HibernationDevice: RESUME=UUID=bfbc4bf8-2e40-4799-bbef-9c5044c87007
  InstallationDate: Installed on 2014-06-03 (648 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
  MachineType: Hewlett-Packard HP Pavilion 15 Notebook PC
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-32-generic.efi.signed 
root=UUID=e92d655d-cf36-4d45-90e7-30a0f9d0949e ro quiet splash
  ProcVersionSignature: Ubuntu 4.2.0-32.37-generic 4.2.8-ckt4
  RelatedPackageVersions:
   linux-restricted-modules-4.2.0-32-generic N/A
   linux-backports-modules-4.2.0-32-generic  N/A
   linux-firmware1.149.3
  RfKill:
   0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
  Tags:  wily
  Uname: Linux 4.2.0-32-generic x86_64
  UpgradeStatus: Upgraded to wily on 2016-02-18 (22 days ago)
  UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo wireshark
  _MarkForUpload: True
  dmi.bios.date: 12/04/2013
  dmi.bios.vendor: Insyde
  dmi.bios.version: F.42
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: 2186
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 35.12
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsyde:bvrF.42:bd12/04/2013:svnHewlett-Packard:pnHPPavilion15NotebookPC:pvr098B1140410620180:rvnHewlett-Packard:rn2186:rvr35.12:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP Pavilion 15 Notebook PC
  dmi.product.version: 098B1140410620180
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1556471/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1516547] Re: Ubuntu 15.10 crashes with RAID-10

[Christoffer Stokbaek]

Hey Joseph. This kernel is working as expected. No crashes so far, RAID
rebuild complete.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1516547

Title:
  Ubuntu 15.10 crashes with RAID-10

Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Wily:
  In Progress

Bug description:
  When trying to install Ubuntu 15.10 with a RAID-10 created the system
  crashes after some time during the installation. Hitting Alt+F4 gives
  the following output as seen from screenshots in attachments.

  It looks like kernel 4.2 have some issues with RAID-10 as we can
  install Ubuntu 15.04 (with kernel 3.19) without problems. If we
  upgrade to kernel 4.2 in Ubuntu 15.04 we get the same errors.

  We have no problems when installing without RAID, RAID-0 or RAID-1.
  We've also tried on different hardware and different disk types/sizes
  but we still get system crash.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1516547/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557994] Re: s390/kconfig: setting for CONFIG...9P....

[Henish Patel]

** Package changed: ubuntu => linux (Ubuntu)

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557994

Title:
  s390/kconfig: setting for CONFIG...9P

Status in linux package in Ubuntu:
  New

Bug description:
  == Comment: #0 - Heinz-Werner Seeck  - 
2016-03-16 03:58:51 ==
  Reason:
  To allow using the host file system from within a KVM guest, in order to 
simplify management

  Following settings are required :
  CONFIG_NET_9P=y
  CONFIG_NET_9P_VIRTIO=y
  CONFIG_9P_FS=y
  CONFIG_9P_FS_POSIX_ACL=y
  CONFIG_9P_FS_SECURITY=y

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1557994/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557994] [NEW] s390/kconfig: setting for CONFIG...9P....

[Launchpad Bug Tracker]

You have been subscribed to a public bug:

== Comment: #0 - Heinz-Werner Seeck  - 
2016-03-16 03:58:51 ==
Reason:
To allow using the host file system from within a KVM guest, in order to 
simplify management

Following settings are required :
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_9P_FS_SECURITY=y

** Affects: linux (Ubuntu)
 Importance: Undecided
 Assignee: Skipper Bug Screeners (skipper-screen-team)
 Status: New


** Tags: architecture-s39064 bugnameltc-139134 severity-critical 
targetmilestone-inin1604
-- 
s390/kconfig: setting for CONFIG...9P
https://bugs.launchpad.net/bugs/1557994
You received this bug notification because you are a member of Kernel Packages, 
which is subscribed to linux in Ubuntu.

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1554613] Re: screen flickering on XPS13 9350

[Thomas Bonfort]

I have tested 4.0.0-13 which does not seem to exhibit the flickering
present from 4.0.0-9 to 4.0.0-12. It does however now present tearing
artifacts when switching focus between windows, see
https://www.dropbox.com/s/opirfyzklathw3i/VID_20160316_112021.m4v?dl=0
for a screengrab.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1554613

Title:
  screen flickering on XPS13 9350

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  see #1552304

  does not affect 4.4.0-8
  affects 4.4.0-9 to 4.4.0-11

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: linux-image-generic 4.4.0.11.12
  ProcVersionSignature: Ubuntu 4.4.0-8.23-generic 4.4.2
  Uname: Linux 4.4.0-8-generic x86_64
  ApportVersion: 2.20-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  tbonfort   1498 F pulseaudio
  CurrentDesktop: KDE
  Date: Tue Mar  8 09:57:12 2016
  HibernationDevice: RESUME=UUID=3248e0d7-0dac-4ccc-8982-b5ac5ce6ed5e
  InstallationDate: Installed on 2016-01-07 (61 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 003: ID 0c45:670c Microdia 
   Bus 001 Device 002: ID 0a5c:6412 Broadcom Corp. 
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: Dell Inc. XPS 13 9350
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-8-generic 
root=UUID=757547b8-d0e4-4eb8-8afd-920b743f99a4 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-4.4.0-8-generic N/A
   linux-backports-modules-4.4.0-8-generic  N/A
   linux-firmware   1.156
  SourcePackage: linux
  UpgradeStatus: Upgraded to xenial on 2016-02-28 (9 days ago)
  dmi.bios.date: 01/08/2016
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 1.2.3
  dmi.board.name: 07TYC2
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A01
  dmi.chassis.type: 9
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvr1.2.3:bd01/08/2016:svnDellInc.:pnXPS139350:pvr:rvnDellInc.:rn07TYC2:rvrA01:cvnDellInc.:ct9:cvr:
  dmi.product.name: XPS 13 9350
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1554613/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557508] onibi (i386) - tests ran: 155, failed: 0

[Brad Figg]

tests ran: 155, failed: 0;
  
http://kernel.ubuntu.com/testing/4.4.0-14.30/onibi__4.4.0-14.30__2016-03-16_08-04-00/results-index.html

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557508

Title:
  linux: 4.4.0-14.30 -proposed tracker

Status in Kernel Development Workflow:
  In Progress
Status in Kernel Development Workflow automated-testing series:
  Incomplete
Status in Kernel Development Workflow prepare-package series:
  Fix Released
Status in Kernel Development Workflow prepare-package-meta series:
  Fix Released
Status in Kernel Development Workflow prepare-package-signed series:
  Fix Released
Status in Kernel Development Workflow promote-to-proposed series:
  Fix Released
Status in Kernel Development Workflow promote-to-release series:
  New
Status in Kernel Development Workflow regression-testing series:
  New
Status in linux package in Ubuntu:
  New
Status in linux source package in Xenial:
  New

Bug description:
  This bug is for tracking the 4.4.0-14.30 upload package. This bug will
  contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-Prepare-package-start:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase-changed:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase:Prepare
  kernel-stable-Promote-to-proposed-end:Tuesday, 15. March 2016 13:00 UTC
  proposed-announcement-sent:True

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-development-workflow/+bug/1557508/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557596] Re: linux: 3.13.0-84.128 -proposed tracker

[Andy Whitcroft]

** Changed in: kernel-sru-workflow/promote-to-proposed
 Assignee: Ubuntu Stable Release Updates Team (ubuntu-sru) => Andy 
Whitcroft (apw)

** Changed in: kernel-sru-workflow/promote-to-proposed
   Status: Confirmed => In Progress

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557596

Title:
  linux: 3.13.0-84.128 -proposed tracker

Status in Kernel SRU Workflow:
  In Progress
Status in Kernel SRU Workflow automated-testing series:
  New
Status in Kernel SRU Workflow certification-testing series:
  New
Status in Kernel SRU Workflow prepare-package series:
  Fix Released
Status in Kernel SRU Workflow prepare-package-meta series:
  Fix Released
Status in Kernel SRU Workflow prepare-package-signed series:
  Fix Released
Status in Kernel SRU Workflow promote-to-proposed series:
  In Progress
Status in Kernel SRU Workflow promote-to-security series:
  New
Status in Kernel SRU Workflow promote-to-updates series:
  New
Status in Kernel SRU Workflow regression-testing series:
  New
Status in Kernel SRU Workflow security-signoff series:
  New
Status in Kernel SRU Workflow verification-testing series:
  New
Status in linux package in Ubuntu:
  Invalid
Status in linux source package in Trusty:
  New

Bug description:
  This bug is for tracking the 3.13.0-84.128 upload package. This bug
  will contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-stable-Prepare-package-start:Tuesday, 15. March 2016 15:38 UTC
  kernel-stable-Promote-to-proposed-end:Tuesday, 15. March 2016 16:01 UTC
  kernel-stable-phase:CopyToProposed
  kernel-stable-Prepare-package-end:Wednesday, 16. March 2016 03:03 UTC
  kernel-stable-Promote-to-proposed-start:Wednesday, 16. March 2016 03:03 UTC
  kernel-stable-phase-changed:Wednesday, 16. March 2016 03:03 UTC

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-sru-workflow/+bug/1557596/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1470250] Re: [Hyper-V] Ubuntu 14.04.2 LTS Generation 2 SCSI Errors on VSS Based Backups

[Emsi]

Lo luck here :(  Even though I have the hv_vss_daemon that logs
FREEZE/THAW I experienced crashes:

Mar 15 10:36:38 emsi-02 Hyper-V VSS: VSS: op=FREEZE: succeeded
Mar 15 10:36:38 emsi-02 kernel: [320343.560935] sd 2:0:0:0: [storvsc] Sense Key 
: Unit Attention [current]
Mar 15 10:36:38 emsi-02 kernel: [320343.560949] sd 2:0:0:0: [storvsc] Add. 
Sense: Changed operating definition
Mar 15 10:36:38 emsi-02 kernel: [320343.560958] sd 2:0:0:0: Warning! Received 
an indication that the operating parameters on this target have changed. The 
Linux SCSI layer does not automatically adjust these parameters.
Mar 15 10:36:38 emsi-02 Hyper-V VSS: VSS: op=THAW: succeeded
Mar 15 10:37:08 emsi-02 kernel: [320373.536208] sd 2:0:0:0: [storvsc] Sense Key 
: Unit Attention [current]
Mar 15 10:37:08 emsi-02 kernel: [320373.536222] sd 2:0:0:0: [storvsc] Add. 
Sense: Changed operating definition
Mar 15 10:37:08 emsi-02 kernel: [320373.536287] sd 2:0:0:0: Warning! Received 
an indication that the operating parameters on thi

and then later on:

[Wed Mar 16 10:06:45 2016] sd 2:0:0:0: [storvsc] Sense Key : Unit Attention 
[current]
[Wed Mar 16 10:06:45 2016] sd 2:0:0:0: [storvsc] Add. Sense: Changed operating 
definition
[Wed Mar 16 10:06:45 2016] sd 2:0:0:0: Warning! Received an indication that the 
operating parameters on this target have changed. The Linux SCSI layer does not 
automatically adjust these parameters.
[Wed Mar 16 10:08:12 2016] sd 2:0:0:0: [storvsc] Sense Key : Unit Attention 
[current]
[Wed Mar 16 10:08:12 2016] sd 2:0:0:0: [storvsc] Add. Sense: Changed operating 
definition
[Wed Mar 16 10:08:12 2016] sd 2:0:0:0: Warning! Received an indication that the 
operating parameters on this target have changed. The Linux SCSI layer does not 
automatically adjust these parameters.
[Wed Mar 16 10:08:12 2016] blk_update_request: I/O error, dev sda, sector 
1061736
[Wed Mar 16 10:08:12 2016] Aborting journal on device sda1-8.
[Wed Mar 16 10:08:12 2016] EXT4-fs error (device sda1): 
ext4_journal_check_start:56:
[Wed Mar 16 10:08:12 2016] EXT4-fs error (device sda1): 
ext4_journal_check_start:56: Detected aborted journal
[Wed Mar 16 10:08:12 2016] EXT4-fs (sda1): Remounting filesystem read-only
[Wed Mar 16 10:08:12 2016] EXT4-fs error (device sda1): 
ext4_journal_check_start:56: Detected aborted journal
[Wed Mar 16 10:08:12 2016] EXT4-fs error (device sda1): 
ext4_journal_check_start:56: Detected aborted journal
[Wed Mar 16 10:08:12 2016] Detected aborted journal
[Wed Mar 16 10:08:12 2016] EXT4-fs error (device sda1) in ext4_writepages:2421: 
IO failure

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1470250

Title:
  [Hyper-V] Ubuntu 14.04.2 LTS Generation 2 SCSI Errors on VSS Based
  Backups

Status in linux package in Ubuntu:
  In Progress
Status in linux source package in Trusty:
  In Progress
Status in linux source package in Vivid:
  In Progress
Status in linux source package in Wily:
  In Progress

Bug description:
  Customers have reported running various versions of Ubuntu 14.04.2 LTS
  on Generation 2 Hyper-V Hosts.On a random Basis, the file system
  will be mounted Read-Only due to a "disk error" (which really isn't
  the case here).As a result, they must reboot the Ubuntu guest to
  get the file system to mount RW again.

  The Error seen are the following:
  Apr 30 00:02:01 balticnetworkstraining kernel: [640153.968142] storvsc: Sense 
Key : Unit Attention [current] 
  Apr 30 00:02:01 balticnetworkstraining kernel: [640153.968145] storvsc: Add. 
Sense: Changed operating definition
  Apr 30 00:02:01 balticnetworkstraining kernel: [640153.968161] sd 0:0:0:0: 
Warning! Received an indication that the operating parameters on this target 
have changed. The Linux SCSI layer does not automatically adjust these 
parameters.
  Apr 30 01:23:26 balticnetworkstraining kernel: [645039.584164] hv_storvsc 
vmbus_0_4: cmd 0x2a scsi status 0x2 srb status 0x82
  Apr 30 01:23:26 balticnetworkstraining kernel: [645039.584178] hv_storvsc 
vmbus_0_4: stor pkt 88006eb6c700 autosense data valid - len 18
  Apr 30 01:23:26 balticnetworkstraining kernel: [645039.584180] storvsc: Sense 
Key : Unit Attention [current] 
  Apr 30 01:23:26 balticnetworkstraining kernel: [645039.584183] storvsc: Add. 
Sense: Changed operating definition
  Apr 30 01:23:26 balticnetworkstraining kernel: [645039.584198] sd 0:0:0:0: 
Warning! Received an indication that the operating parameters on this target 
have changed.  The Linux SCSI layer does not automatically adjust these 
parameters.

  This relates to the VSS "Windows Server Backup" process that kicks off at 
midnight on the host and finishes an hour and half later.   
  Yes, we do have hv_vss_daemon and hv_kvp_daemon running for the correct 
kernel version we have.   We're currently running kernel version 
3.13.0-49-generic #83 on one system and 3.16.0-34-generic #37 on the other. -- 

[Kernel-packages] [Bug 1470250] Re: [Hyper-V] Ubuntu 14.04.2 LTS Generation 2 SCSI Errors on VSS Based Backups

[Emsi]

I also found someone reporting the issue on RedHat:
https://social.technet.microsoft.com/Forums/office/en-US/cfe15e32-bfbc-47e0-8d2b-382a1293b9aa/vss-issues-with-centos-66-x64?forum=linuxintegrationservices

>From my tests it looked like Centos kernels are not affected but above
report casts some shadow on that assumption. It might be that the buggy
code was integrated into RH kernels as well.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1470250

Title:
  [Hyper-V] Ubuntu 14.04.2 LTS Generation 2 SCSI Errors on VSS Based
  Backups

Status in linux package in Ubuntu:
  In Progress
Status in linux source package in Trusty:
  In Progress
Status in linux source package in Vivid:
  In Progress
Status in linux source package in Wily:
  In Progress

Bug description:
  Customers have reported running various versions of Ubuntu 14.04.2 LTS
  on Generation 2 Hyper-V Hosts.On a random Basis, the file system
  will be mounted Read-Only due to a "disk error" (which really isn't
  the case here).As a result, they must reboot the Ubuntu guest to
  get the file system to mount RW again.

  The Error seen are the following:
  Apr 30 00:02:01 balticnetworkstraining kernel: [640153.968142] storvsc: Sense 
Key : Unit Attention [current] 
  Apr 30 00:02:01 balticnetworkstraining kernel: [640153.968145] storvsc: Add. 
Sense: Changed operating definition
  Apr 30 00:02:01 balticnetworkstraining kernel: [640153.968161] sd 0:0:0:0: 
Warning! Received an indication that the operating parameters on this target 
have changed. The Linux SCSI layer does not automatically adjust these 
parameters.
  Apr 30 01:23:26 balticnetworkstraining kernel: [645039.584164] hv_storvsc 
vmbus_0_4: cmd 0x2a scsi status 0x2 srb status 0x82
  Apr 30 01:23:26 balticnetworkstraining kernel: [645039.584178] hv_storvsc 
vmbus_0_4: stor pkt 88006eb6c700 autosense data valid - len 18
  Apr 30 01:23:26 balticnetworkstraining kernel: [645039.584180] storvsc: Sense 
Key : Unit Attention [current] 
  Apr 30 01:23:26 balticnetworkstraining kernel: [645039.584183] storvsc: Add. 
Sense: Changed operating definition
  Apr 30 01:23:26 balticnetworkstraining kernel: [645039.584198] sd 0:0:0:0: 
Warning! Received an indication that the operating parameters on this target 
have changed.  The Linux SCSI layer does not automatically adjust these 
parameters.

  This relates to the VSS "Windows Server Backup" process that kicks off at 
midnight on the host and finishes an hour and half later.   
  Yes, we do have hv_vss_daemon and hv_kvp_daemon running for the correct 
kernel version we have.   We're currently running kernel version 
3.13.0-49-generic #83 on one system and 3.16.0-34-generic #37 on the other. -- 
We see the same errors on both.
  As a result, we've been hesitant to drop any more ubuntu guests on our 2012R2 
hyper-v system because of this.   We can stop the backup process and all is 
good, but we need nightly backups to image all of our VM's.   All the windows 
guests have no issues of course.   We also have some CentOS based guests 
running without issues from what we've seen.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1470250/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557508] onza (i386) - tests ran: 158, failed: 3

[Brad Figg]

tests ran: 158, failed: 3;
  
http://kernel.ubuntu.com/testing/4.4.0-14.30/onza__4.4.0-14.30__2016-03-16_08-01-00/results-index.html

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557508

Title:
  linux: 4.4.0-14.30 -proposed tracker

Status in Kernel Development Workflow:
  In Progress
Status in Kernel Development Workflow automated-testing series:
  Incomplete
Status in Kernel Development Workflow prepare-package series:
  Fix Released
Status in Kernel Development Workflow prepare-package-meta series:
  Fix Released
Status in Kernel Development Workflow prepare-package-signed series:
  Fix Released
Status in Kernel Development Workflow promote-to-proposed series:
  Fix Released
Status in Kernel Development Workflow promote-to-release series:
  New
Status in Kernel Development Workflow regression-testing series:
  New
Status in linux package in Ubuntu:
  New
Status in linux source package in Xenial:
  New

Bug description:
  This bug is for tracking the 4.4.0-14.30 upload package. This bug will
  contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-Prepare-package-start:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase-changed:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase:Prepare
  kernel-stable-Promote-to-proposed-end:Tuesday, 15. March 2016 13:00 UTC
  proposed-announcement-sent:True

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-development-workflow/+bug/1557508/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1556471] Re: Connecting an Osprey 2 Mini (USB cellular wireless router) sometimes causes an endless reset loop or a kernel panic

[ais523]

I have sent the email. I will check the mailing list archives on
occasion, and provide a link when it becomes available.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1556471

Title:
  Connecting an Osprey 2 Mini (USB cellular wireless router) sometimes
  causes an endless reset loop or a kernel panic

Status in linux package in Ubuntu:
  Triaged

Bug description:
  Steps to reproduce (happens > 50% of the time, but not every time):

  Turn on an Osprey 2 Mini, and connect it to a USB port via a USB cable
  while both the device and computer are on (i.e. hotplug).

  Observed symptoms:
  - sometimes the Osprey 2 Mini goes into an endless reset loop (visible as the 
LEDs on the front of the device flashing rapidly), being reset approximately 
every 200ms; on such occasions, the Ubuntu user interface often reacts as 
though I'd inserted an audio CD containing corrupted data (e.g. via repeatedly 
adding an "Audio CD" icon to the launcher and then removing it, and putting up 
dialog boxes complaining about failure to read the data).
  - sometimes the kernel panics (often some time after the reset loop starts, 
perhaps up to 10 seconds); when this happens there was always or nearly always 
a reset loop occurring beforehand.
  - sometimes the device resets once or not at all, then works as expected 
(showing up as a network interface, and allowing me to communicate to the 
Internet with a wired connection); I'm currently using an Osprey 2 Mini for 
this purpose right now.

  The kernel panics lock up the entire system (forcing a hard power
  off). lt-Sysrq commands don't work in this state (even though I have
  them enabled), and sometimes the Caps Lock light flashes repeatedly.
  The logs end some time before the panic occurs.

  /var/log/syslog:
  
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1556471/+attachment/4598145/+files/syslog

  The reset loops also occurred when I was using Ubuntu vivid. The
  kernel panics only happened after an upgrade to wily. Output of lsusb
  -v is attached.

  ---
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ais523 6233 F pulseaudio
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 15.10
  HibernationDevice: RESUME=UUID=bfbc4bf8-2e40-4799-bbef-9c5044c87007
  InstallationDate: Installed on 2014-06-03 (648 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
  MachineType: Hewlett-Packard HP Pavilion 15 Notebook PC
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-32-generic.efi.signed 
root=UUID=e92d655d-cf36-4d45-90e7-30a0f9d0949e ro quiet splash
  ProcVersionSignature: Ubuntu 4.2.0-32.37-generic 4.2.8-ckt4
  RelatedPackageVersions:
   linux-restricted-modules-4.2.0-32-generic N/A
   linux-backports-modules-4.2.0-32-generic  N/A
   linux-firmware1.149.3
  RfKill:
   0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
  Tags:  wily
  Uname: Linux 4.2.0-32-generic x86_64
  UpgradeStatus: Upgraded to wily on 2016-02-18 (22 days ago)
  UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo wireshark
  _MarkForUpload: True
  dmi.bios.date: 12/04/2013
  dmi.bios.vendor: Insyde
  dmi.bios.version: F.42
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: 2186
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 35.12
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsyde:bvrF.42:bd12/04/2013:svnHewlett-Packard:pnHPPavilion15NotebookPC:pvr098B1140410620180:rvnHewlett-Packard:rn2186:rvr35.12:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP Pavilion 15 Notebook PC
  dmi.product.version: 098B1140410620180
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1556471/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1552906] Re: System freezes after closing lid on Thinkpad X260

[Trent Lloyd]

Upstream bug had a patch posted today:
https://bugzilla.kernel.org/show_bug.cgi?id=110941#c90

** Bug watch added: Linux Kernel Bug Tracker #110941
   http://bugzilla.kernel.org/show_bug.cgi?id=110941

** Also affects: linux via
   http://bugzilla.kernel.org/show_bug.cgi?id=110941
   Importance: Unknown
   Status: Unknown

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1552906

Title:
  System freezes after closing lid on Thinkpad X260

Status in Linux:
  Unknown
Status in linux package in Ubuntu:
  Confirmed

Bug description:
  My current Ubuntu version is 14.04.4 but I also tried 15.10.
  Regardless of the Ubuntu version there is a serious problem with my new 
Thinkpad X260 when it is in battery mode and I close and reopen the lid. The 
problem is not affecting the suspend mode as it still occurs when this mode is 
disabled.

  what I expect to happen: After closing the lid the screen goes off.
  When I open the lid again, screen goes on and I can use the laptop.

  what happens every time: When I close the lid the screen turns black.
  When I open the lid again the screen displays the system but it is
  frozen and does not react on input.

  Interestingly I can not reproduce this problem when the laptop is connected 
to an AC power source.
  ---
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  simon  1437 F pulseaudio
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=76bcd0ad-fc42-4d1a-8089-0f10d23df682
  InstallationDate: Installed on 2016-03-03 (0 days ago)
  InstallationMedia: Ubuntu 14.04.4 LTS "Trusty Tahr" - Release amd64 
(20160217.1)
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 004: ID 138a:0017 Validity Sensors, Inc.
   Bus 001 Device 003: ID 04ca:7058 Lite-On Technology Corp.
   Bus 001 Device 005: ID 8087:0a2b Intel Corp.
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: LENOVO 20F5S0EU00
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-27-generic.efi.signed 
root=UUID=fa7f6b64-3d57-43ce-a52b-5323c46dd0ca ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 4.2.0-27.32~14.04.1-generic 4.2.8-ckt1
  RelatedPackageVersions:
   linux-restricted-modules-4.2.0-27-generic N/A
   linux-backports-modules-4.2.0-27-generic  N/A
   linux-firmware1.127.20
  Tags:  trusty
  Uname: Linux 4.2.0-27-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 01/25/2016
  dmi.bios.vendor: LENOVO
  dmi.bios.version: R02ET44W (1.17 )
  dmi.board.asset.tag: Not Available
  dmi.board.name: 20F5S0EU00
  dmi.board.vendor: LENOVO
  dmi.board.version: Not Defined
  dmi.chassis.asset.tag: No Asset Information
  dmi.chassis.type: 10
  dmi.chassis.vendor: LENOVO
  dmi.chassis.version: None
  dmi.modalias: 
dmi:bvnLENOVO:bvrR02ET44W(1.17):bd01/25/2016:svnLENOVO:pn20F5S0EU00:pvrThinkPadX260:rvnLENOVO:rn20F5S0EU00:rvrNotDefined:cvnLENOVO:ct10:cvrNone:
  dmi.product.name: 20F5S0EU00
  dmi.product.version: ThinkPad X260
  dmi.sys.vendor: LENOVO

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/1552906/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557870] Re: linux-lts-vivid: 3.19.0-57.63~14.04.1 -proposed tracker

[Andy Whitcroft]

** Changed in: linux-lts-vivid (Ubuntu)
   Status: New => Invalid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-vivid in Ubuntu.
https://bugs.launchpad.net/bugs/1557870

Title:
  linux-lts-vivid: 3.19.0-57.63~14.04.1 -proposed tracker

Status in Kernel SRU Workflow:
  In Progress
Status in Kernel SRU Workflow automated-testing series:
  New
Status in Kernel SRU Workflow certification-testing series:
  New
Status in Kernel SRU Workflow prepare-package series:
  New
Status in Kernel SRU Workflow prepare-package-meta series:
  New
Status in Kernel SRU Workflow prepare-package-signed series:
  New
Status in Kernel SRU Workflow promote-to-proposed series:
  New
Status in Kernel SRU Workflow promote-to-security series:
  New
Status in Kernel SRU Workflow promote-to-updates series:
  New
Status in Kernel SRU Workflow regression-testing series:
  New
Status in Kernel SRU Workflow security-signoff series:
  New
Status in Kernel SRU Workflow verification-testing series:
  New
Status in linux-lts-vivid package in Ubuntu:
  Invalid
Status in linux-lts-vivid source package in Trusty:
  New

Bug description:
  This bug is for tracking the 3.19.0-57.63~14.04.1 upload package. This
  bug will contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-stable-Prepare-package-start:Wednesday, 16. March 2016 05:01 UTC
  kernel-stable-phase:Prepare
  kernel-stable-phase-changed:Wednesday, 16. March 2016 05:01 UTC
  kernel-stable-master-bug:1557623
  kernel-stable-Promote-to-proposed-end:Wednesday, 16. March 2016 06:04 UTC

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-sru-workflow/+bug/1557870/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557508] kili (amd64) - tests ran: 1, failed: 1

[Brad Figg]

tests ran:   1, failed: 1;
  
http://kernel.ubuntu.com/testing/4.4.0-14.30/kili__4.4.0-14.30__2016-03-16_05-19-00/results-index.html

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557508

Title:
  linux: 4.4.0-14.30 -proposed tracker

Status in Kernel Development Workflow:
  In Progress
Status in Kernel Development Workflow automated-testing series:
  Incomplete
Status in Kernel Development Workflow prepare-package series:
  Fix Released
Status in Kernel Development Workflow prepare-package-meta series:
  Fix Released
Status in Kernel Development Workflow prepare-package-signed series:
  Fix Released
Status in Kernel Development Workflow promote-to-proposed series:
  Fix Released
Status in Kernel Development Workflow promote-to-release series:
  New
Status in Kernel Development Workflow regression-testing series:
  New
Status in linux package in Ubuntu:
  New
Status in linux source package in Xenial:
  New

Bug description:
  This bug is for tracking the 4.4.0-14.30 upload package. This bug will
  contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-Prepare-package-start:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase-changed:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase:Prepare
  kernel-stable-Promote-to-proposed-end:Tuesday, 15. March 2016 13:00 UTC
  proposed-announcement-sent:True

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-development-workflow/+bug/1557508/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557842] Re: linux-lts-trusty: 3.13.0-84.128~precise1 -proposed tracker

[Andy Whitcroft]

** Changed in: linux-lts-trusty (Ubuntu)
   Status: New => Invalid

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-trusty in Ubuntu.
https://bugs.launchpad.net/bugs/1557842

Title:
  linux-lts-trusty: 3.13.0-84.128~precise1 -proposed tracker

Status in Kernel SRU Workflow:
  In Progress
Status in Kernel SRU Workflow automated-testing series:
  New
Status in Kernel SRU Workflow certification-testing series:
  New
Status in Kernel SRU Workflow prepare-package series:
  New
Status in Kernel SRU Workflow prepare-package-meta series:
  New
Status in Kernel SRU Workflow prepare-package-signed series:
  New
Status in Kernel SRU Workflow promote-to-proposed series:
  New
Status in Kernel SRU Workflow promote-to-security series:
  New
Status in Kernel SRU Workflow promote-to-updates series:
  New
Status in Kernel SRU Workflow regression-testing series:
  New
Status in Kernel SRU Workflow security-signoff series:
  New
Status in Kernel SRU Workflow verification-testing series:
  New
Status in linux-lts-trusty package in Ubuntu:
  Invalid
Status in linux-lts-trusty source package in Precise:
  New

Bug description:
  This bug is for tracking the 3.13.0-84.128~precise1 upload package.
  This bug will contain status and testing results related to that
  upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-stable-Prepare-package-start:Wednesday, 16. March 2016 03:01 UTC
  kernel-stable-phase:Prepare
  kernel-stable-phase-changed:Wednesday, 16. March 2016 03:01 UTC
  kernel-stable-master-bug:1557596
  kernel-stable-Promote-to-proposed-end:Wednesday, 16. March 2016 04:01 UTC

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-sru-workflow/+bug/1557842/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557508] fozzie (i386) - tests ran: 155, failed: 0

[Brad Figg]

tests ran: 155, failed: 0;
  
http://kernel.ubuntu.com/testing/4.4.0-14.30/fozzie__4.4.0-14.30__2016-03-16_07-23-00/results-index.html

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557508

Title:
  linux: 4.4.0-14.30 -proposed tracker

Status in Kernel Development Workflow:
  In Progress
Status in Kernel Development Workflow automated-testing series:
  Incomplete
Status in Kernel Development Workflow prepare-package series:
  Fix Released
Status in Kernel Development Workflow prepare-package-meta series:
  Fix Released
Status in Kernel Development Workflow prepare-package-signed series:
  Fix Released
Status in Kernel Development Workflow promote-to-proposed series:
  Fix Released
Status in Kernel Development Workflow promote-to-release series:
  New
Status in Kernel Development Workflow regression-testing series:
  New
Status in linux package in Ubuntu:
  New
Status in linux source package in Xenial:
  New

Bug description:
  This bug is for tracking the 4.4.0-14.30 upload package. This bug will
  contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-Prepare-package-start:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase-changed:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase:Prepare
  kernel-stable-Promote-to-proposed-end:Tuesday, 15. March 2016 13:00 UTC
  proposed-announcement-sent:True

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-development-workflow/+bug/1557508/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557508] dagmar (i386) - tests ran: 155, failed: 0

[Brad Figg]

tests ran: 155, failed: 0;
  
http://kernel.ubuntu.com/testing/4.4.0-14.30/dagmar__4.4.0-14.30__2016-03-16_07-17-00/results-index.html

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557508

Title:
  linux: 4.4.0-14.30 -proposed tracker

Status in Kernel Development Workflow:
  In Progress
Status in Kernel Development Workflow automated-testing series:
  Incomplete
Status in Kernel Development Workflow prepare-package series:
  Fix Released
Status in Kernel Development Workflow prepare-package-meta series:
  Fix Released
Status in Kernel Development Workflow prepare-package-signed series:
  Fix Released
Status in Kernel Development Workflow promote-to-proposed series:
  Fix Released
Status in Kernel Development Workflow promote-to-release series:
  New
Status in Kernel Development Workflow regression-testing series:
  New
Status in linux package in Ubuntu:
  New
Status in linux source package in Xenial:
  New

Bug description:
  This bug is for tracking the 4.4.0-14.30 upload package. This bug will
  contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-Prepare-package-start:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase-changed:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase:Prepare
  kernel-stable-Promote-to-proposed-end:Tuesday, 15. March 2016 13:00 UTC
  proposed-announcement-sent:True

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-development-workflow/+bug/1557508/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557950] Missing required logs.

[Brad Figg]

This bug is missing log files that will aid in diagnosing the problem.
>From a terminal window please run:

apport-collect 1557950

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable
to run this command, please add a comment stating that fact and change
the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the
Ubuntu Kernel Team.

** Changed in: linux (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557950

Title:
  mlx5_core kernel trace after "ethtool -C eth1 adaptive-rx on" flow

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  reproduce steps:
  # ethtool -c eth1 
  Coalesce parameters for eth1: 
  Adaptive RX: off TX: off

  # ethtool -C eth1 adaptive-rx on


  
  # cat /etc/os-release
  NAME="Ubuntu"
  VERSION="16.04 (Xenial Xerus)"
  ID=ubuntu
  ID_LIKE=debian
  PRETTY_NAME="Ubuntu 16.04"
  VERSION_ID="16.04"
  HOME_URL="http://www.ubuntu.com/;
  SUPPORT_URL="http://help.ubuntu.com/;
  BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/;
  UBUNTU_CODENAME=xenial

  # uname -a
  Linux dev-h-vrt-006 4.4.0-11-generic #26-Ubuntu SMP Sat Mar 5 14:25:21 UTC 
2016 x86_64 x86_64 x86_64 GNU/Linux

  
  #dmesg 
  [174430.803529] mst_pci: module verification failed: signature and/or 
required key missing - tainting kernel  
   
  [174453.001485] BUG: unable to handle kernel NULL pointer dereference at  
 (null) 
   
  [174453.001509] IP: [] mlx5e_set_coalesce+0x6e/0x100 
[mlx5_core] 
  
  [174453.001535] PGD 81a5c7067 PUD 81aa93067 PMD 0 

   
  [174453.001556] Oops:  [#1] SMP
  [174453.001571] Modules linked in: mst_pciconf(OE) mst_pci(OE) nfsv3 nfs_acl 
rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache mlx5_ib ib_core 
ib_addr vfio_pci vfio_virqfd vfio_iommu_type1 vfio xt_CHECKSUM iptable_mangle 
ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat 
nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT 
nf_reject_ipv4 xt_tcpudp ebtable_filter ebtables ip6table_filter ip6_tables 
iptable_filter ip_tables x_tables bridge stp llc x86_pkg_temp_thermal 
intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul aesni_intel kvm_intel 
aes_x86_64 ipmi_ssif lrw gf128mul glue_helper ablk_helper cryptd serio_raw kvm 
sb_edac edac_core irqbypass hpilo ipmi_si 8250_fintek ioatdma ipmi_msghandler 
acpi_power_meter mac_hid lpc_ich shpchp sunrpc autofs4 mlx4_en
  [174453.001928]  psmouse ixgbe dca vxlan pata_acpi ip6_udp_tunnel udp_tunnel 
mdio hpsa mlx5_core tg3 scsi_transport_sas mlx4_core ptp pps_core wmi fjes
  [174453.002011] CPU: 2 PID: 40824 Comm: ethtool Tainted: G   OE   
4.4.0-11-generic #26-Ubuntu
  [174453.002026] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 12/20/2013
  [174453.002037] task: 8800bd919b80 ti: 880814d74000 task.ti: 
880814d74000
  [174453.002072] RIP: 0010:[]  [] 
mlx5e_set_coalesce+0x6e/0x100 [mlx5_core]
  [174453.002119] RSP: 0018:880814d77c30  EFLAGS: 00010246
  [174453.002141] RAX:  RBX: 880816e0 RCX: 

  [174453.002176] RDX:  RSI: 880814d77c74 RDI: 
880814e6
  [174453.002210] RBP: 880814d77c60 R08: 81e42520 R09: 
ff00
  [174453.002245] R10: 0533 R11: 0246 R12: 
880814d77c74
  [174453.002280] R13: 880814e6 R14:  R15: 
880814e6
  [174453.002316] FS:  7f7e927f7700() GS:88081f68() 
knlGS:
  [174453.002352] CS:  0010 DS:  ES:  CR0: 80050033
  [174453.002374] CR2:  CR3: 000818365000 CR4: 
001406e0
  [174453.002409] Stack:
  [174453.002427]  17a4b290 880814e6 000600114bb3 
000f
  [174453.002476]  8946 880814e6 880814d77ce0 
8171784a
  [174453.002525]  000f0010 00200010  
00200010
  [174453.002574] Call Trace:
  [174453.002597]  [] ethtool_set_coalesce+0x5a/0x80
  [174453.002621]  [] dev_ethtool+0xe78/0x1d70
  [174453.002645]  [] ? page_cache_async_readahead+0x6b/0x70
  [174453.002670]  [] ? page_add_file_rmap+0x25/0x60
  [174453.002694]  [] ? __rtnl_unlock+0x15/0x20
  [174453.002717]  [] ? netdev_run_todo+0x61/0x320
  [174453.002741]  [] dev_ioctl+0x182/0x580
  

[Kernel-packages] [Bug 1554613] Re: screen flickering on XPS13 9350

[Thomas Bonfort]

Christopher,
Yes I have read that section but it is not useful as selecting between bad/good 
is already the required workflow. The issue is that the documentation refers to 
using the packaging scripts in the debian/ subdir, which is not present and/or 
usable in the intermediate bisecting steps.
I'm currently testing using this workflow, please advise if it is the correct 
one:

make mrproper && git clean -d -f && git checkout debian
git bisect good/bad/skip
cp /boot/config-4.4.0-8-generic .config
make oldconfig
make-kpkg --rootcmd=fakeroot --append-to-version "-04-deadbeef" --initrd --us 
--uc kernel_image -j4
#install and test kernel

here is my current bisect log. note that I have to skip many commits as
they fail to compile:

git bisect start '--' 'drivers/gpu/' 'include/drm/' 'include/uapi/drm/' 
'ubuntu/i915'
# good: [463f21c6a2dcc90e06dbc2eb2341640ae5c43c28] UBUNTU: Ubuntu-4.4.0-8.23
git bisect good 463f21c6a2dcc90e06dbc2eb2341640ae5c43c28
# bad: [b8723f286caa9218ebda0c47a435d1b52b8dfaf4] UBUNTU: Ubuntu-4.4.0-9.24
git bisect bad b8723f286caa9218ebda0c47a435d1b52b8dfaf4
# good: [1cb8570bf04ab12a03c31c397a4d158f24895d9c] Linux 4.4.2
git bisect good 1cb8570bf04ab12a03c31c397a4d158f24895d9c
# skip: [19ed21af1bffa667745926f2b8b28a0505cca0be] drm: Add "prefix" parameter 
to drm_rect_debug_print()
git bisect skip 19ed21af1bffa667745926f2b8b28a0505cca0be
# skip: [a9b3cdd235bf966b4cddab82d61dc941a74e3a74] UBUNTU: SAUCE: Backport 
I915_PARAM_HAS_EXEC_SOFTPIN and EXEC_OBJECT_PINNED
git bisect skip a9b3cdd235bf966b4cddab82d61dc941a74e3a74
# skip: [8bfcd31065a60ffba9e600fafd62bbd90ff0895a] drm/atomic: Add encoder_mask 
to crtc_state, v3.
git bisect skip 8bfcd31065a60ffba9e600fafd62bbd90ff0895a
# skip: [693a63075524374165196137ca4b952a6afd5265] drm/i915/kbl: Add Kabylake 
GT4 PCI ID
git bisect skip 693a63075524374165196137ca4b952a6afd5265
# good: [34f091b3d14dadd9ef8d1f8a678656aed759fe33] UBUNTU: SAUCE: radeon: r100: 
Silence 'may be used uninitialized' warnings
git bisect good 34f091b3d14dadd9ef8d1f8a678656aed759fe33
# skip: [abfd1387464d2e764989d8fbaea78b0b7af89142] drm/i915: Set 
connector_state->connector using the helper.
git bisect skip abfd1387464d2e764989d8fbaea78b0b7af89142
# skip: [975bc60948107bce995ae5d18e0755dc5f2abf53] drm: fix potential dangling 
else problems in for_each_ macros
git bisect skip 975bc60948107bce995ae5d18e0755dc5f2abf53
# good: [98e1eef7fa2b711e0946d22a3c2659458582e807] drm/i915/skl: Disable coarse 
power gating up until F0
git bisect good 98e1eef7fa2b711e0946d22a3c2659458582e807
# skip: [1f955e92dc87f484048109bc1d434fa59221c5dd] drm/atomic: add connector 
mask to drm_crtc_state.
git bisect skip 1f955e92dc87f484048109bc1d434fa59221c5dd
# skip: [7d5329085d3e64b6b04a9de1c86f5074bac26cc9] drm/i915: Update 
connector_mask during readout, v2.
git bisect skip 7d5329085d3e64b6b04a9de1c86f5074bac26cc9
# skip: [8167675659a93004ae99d7b3aa90e1134352a836] drm: Implement 
drm_modeset_lock_all_ctx()
git bisect skip 8167675659a93004ae99d7b3aa90e1134352a836
# skip: [8ba5c26373f1e4341f2cbd198ddeb41644adf9b6] drm/atomic: Do not unset 
crtc when an encoder is stolen
git bisect skip 8ba5c26373f1e4341f2cbd198ddeb41644adf9b6
# skip: [197b480eac049b43e26cad615d2f541b5eab0238] drm/i915: Add get_eld audio 
component
git bisect skip 197b480eac049b43e26cad615d2f541b5eab0238
# skip: [59784e17027c76b7621c19393828dfd0aa1ffde5] UBUNTU: SAUCE: i915_bpo: Add 
i915_bpo_*() calls for ubuntu/i915
git bisect skip 59784e17027c76b7621c19393828dfd0aa1ffde5

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1554613

Title:
  screen flickering on XPS13 9350

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  see #1552304

  does not affect 4.4.0-8
  affects 4.4.0-9 to 4.4.0-11

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: linux-image-generic 4.4.0.11.12
  ProcVersionSignature: Ubuntu 4.4.0-8.23-generic 4.4.2
  Uname: Linux 4.4.0-8-generic x86_64
  ApportVersion: 2.20-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  tbonfort   1498 F pulseaudio
  CurrentDesktop: KDE
  Date: Tue Mar  8 09:57:12 2016
  HibernationDevice: RESUME=UUID=3248e0d7-0dac-4ccc-8982-b5ac5ce6ed5e
  InstallationDate: Installed on 2016-01-07 (61 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 003: ID 0c45:670c Microdia 
   Bus 001 Device 002: ID 0a5c:6412 Broadcom Corp. 
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  MachineType: Dell Inc. XPS 13 9350
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-8-generic 
root=UUID=757547b8-d0e4-4eb8-8afd-920b743f99a4 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-4.4.0-8-generic N/A
   

[Kernel-packages] [Bug 1557950] [NEW] mlx5_core kernel trace after "ethtool -C eth1 adaptive-rx on" flow

[Talat Batheesh]

Public bug reported:

reproduce steps:
# ethtool -c eth1 
Coalesce parameters for eth1: 
Adaptive RX: off TX: off

# ethtool -C eth1 adaptive-rx on


# cat /etc/os-release
NAME="Ubuntu"
VERSION="16.04 (Xenial Xerus)"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu 16.04"
VERSION_ID="16.04"
HOME_URL="http://www.ubuntu.com/;
SUPPORT_URL="http://help.ubuntu.com/;
BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/;
UBUNTU_CODENAME=xenial

# uname -a
Linux dev-h-vrt-006 4.4.0-11-generic #26-Ubuntu SMP Sat Mar 5 14:25:21 UTC 2016 
x86_64 x86_64 x86_64 GNU/Linux


#dmesg 
[174430.803529] mst_pci: module verification failed: signature and/or required 
key missing - tainting kernel   
  
[174453.001485] BUG: unable to handle kernel NULL pointer dereference at
   (null)   
 
[174453.001509] IP: [] mlx5e_set_coalesce+0x6e/0x100 
[mlx5_core] 
  
[174453.001535] PGD 81a5c7067 PUD 81aa93067 PMD 0   

 
[174453.001556] Oops:  [#1] SMP
[174453.001571] Modules linked in: mst_pciconf(OE) mst_pci(OE) nfsv3 nfs_acl 
rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache mlx5_ib ib_core 
ib_addr vfio_pci vfio_virqfd vfio_iommu_type1 vfio xt_CHECKSUM iptable_mangle 
ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat 
nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT 
nf_reject_ipv4 xt_tcpudp ebtable_filter ebtables ip6table_filter ip6_tables 
iptable_filter ip_tables x_tables bridge stp llc x86_pkg_temp_thermal 
intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul aesni_intel kvm_intel 
aes_x86_64 ipmi_ssif lrw gf128mul glue_helper ablk_helper cryptd serio_raw kvm 
sb_edac edac_core irqbypass hpilo ipmi_si 8250_fintek ioatdma ipmi_msghandler 
acpi_power_meter mac_hid lpc_ich shpchp sunrpc autofs4 mlx4_en
[174453.001928]  psmouse ixgbe dca vxlan pata_acpi ip6_udp_tunnel udp_tunnel 
mdio hpsa mlx5_core tg3 scsi_transport_sas mlx4_core ptp pps_core wmi fjes
[174453.002011] CPU: 2 PID: 40824 Comm: ethtool Tainted: G   OE   
4.4.0-11-generic #26-Ubuntu
[174453.002026] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 12/20/2013
[174453.002037] task: 8800bd919b80 ti: 880814d74000 task.ti: 
880814d74000
[174453.002072] RIP: 0010:[]  [] 
mlx5e_set_coalesce+0x6e/0x100 [mlx5_core]
[174453.002119] RSP: 0018:880814d77c30  EFLAGS: 00010246
[174453.002141] RAX:  RBX: 880816e0 RCX: 

[174453.002176] RDX:  RSI: 880814d77c74 RDI: 
880814e6
[174453.002210] RBP: 880814d77c60 R08: 81e42520 R09: 
ff00
[174453.002245] R10: 0533 R11: 0246 R12: 
880814d77c74
[174453.002280] R13: 880814e6 R14:  R15: 
880814e6
[174453.002316] FS:  7f7e927f7700() GS:88081f68() 
knlGS:
[174453.002352] CS:  0010 DS:  ES:  CR0: 80050033
[174453.002374] CR2:  CR3: 000818365000 CR4: 
001406e0
[174453.002409] Stack:
[174453.002427]  17a4b290 880814e6 000600114bb3 
000f
[174453.002476]  8946 880814e6 880814d77ce0 
8171784a
[174453.002525]  000f0010 00200010  
00200010
[174453.002574] Call Trace:
[174453.002597]  [] ethtool_set_coalesce+0x5a/0x80
[174453.002621]  [] dev_ethtool+0xe78/0x1d70
[174453.002645]  [] ? page_cache_async_readahead+0x6b/0x70
[174453.002670]  [] ? page_add_file_rmap+0x25/0x60
[174453.002694]  [] ? __rtnl_unlock+0x15/0x20
[174453.002717]  [] ? netdev_run_todo+0x61/0x320
[174453.002741]  [] dev_ioctl+0x182/0x580
[174453.002765]  [] sock_do_ioctl+0x42/0x50
[174453.002788]  [] sock_ioctl+0x1d2/0x290
[174453.002811]  [] do_vfs_ioctl+0x29f/0x490
[174453.003136]  [] ? __do_page_fault+0x1b4/0x400
[174453.003161]  [] ? fd_install+0x25/0x30
[174453.003183]  [] SyS_ioctl+0x79/0x90
[174453.003208]  [] entry_SYSCALL_64_fastpath+0x16/0x71
[174453.003231] Code: 66 89 87 36 66 00 00 8b 46 08 66 89 87 38 66 00 00 0f 84 
91 00 00 00 49 89 fd 49 89 f4 48 63 45 d4 49 8b 95 00 13 00 00 45 31 f6 <4c> 8b 
3c c2 41 80 bf dc 18 00 00 00 74 3d 49 63 c6 41 0f b7 4c
[174453.003564] RIP  [] mlx5e_set_coalesce+0x6e/0x100 
[mlx5_core]
[174453.003607]  RSP 
[174453.003626] CR2: 
[174453.004055] ---[ end trace 8466dfbb422a27d8 ]---


Fix upstream commits
7524a5d88b94afef8397a79f1e664af5b7052c22 net/mlx5e: Don't modify CQ before it 
was created
2fcb92fbd04eef26dfe7e67839da6262d83d6b65 net/mlx5e: Don't try to modify CQ 
moderation if 

[Kernel-packages] [Bug 1557950] Re: mlx5_core kernel trace after "ethtool -C eth1 adaptive-rx on" flow

[Talat Batheesh]

** Patch added: 
"0001-net-mlx5e-Don-t-try-to-modify-CQ-moderation-if-it-is.patch"
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1557950/+attachment/4600894/+files/0001-net-mlx5e-Don-t-try-to-modify-CQ-moderation-if-it-is.patch

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557950

Title:
  mlx5_core kernel trace after "ethtool -C eth1 adaptive-rx on" flow

Status in linux package in Ubuntu:
  New

Bug description:
  reproduce steps:
  # ethtool -c eth1 
  Coalesce parameters for eth1: 
  Adaptive RX: off TX: off

  # ethtool -C eth1 adaptive-rx on


  
  # cat /etc/os-release
  NAME="Ubuntu"
  VERSION="16.04 (Xenial Xerus)"
  ID=ubuntu
  ID_LIKE=debian
  PRETTY_NAME="Ubuntu 16.04"
  VERSION_ID="16.04"
  HOME_URL="http://www.ubuntu.com/;
  SUPPORT_URL="http://help.ubuntu.com/;
  BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/;
  UBUNTU_CODENAME=xenial

  # uname -a
  Linux dev-h-vrt-006 4.4.0-11-generic #26-Ubuntu SMP Sat Mar 5 14:25:21 UTC 
2016 x86_64 x86_64 x86_64 GNU/Linux

  
  #dmesg 
  [174430.803529] mst_pci: module verification failed: signature and/or 
required key missing - tainting kernel  
   
  [174453.001485] BUG: unable to handle kernel NULL pointer dereference at  
 (null) 
   
  [174453.001509] IP: [] mlx5e_set_coalesce+0x6e/0x100 
[mlx5_core] 
  
  [174453.001535] PGD 81a5c7067 PUD 81aa93067 PMD 0 

   
  [174453.001556] Oops:  [#1] SMP
  [174453.001571] Modules linked in: mst_pciconf(OE) mst_pci(OE) nfsv3 nfs_acl 
rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache mlx5_ib ib_core 
ib_addr vfio_pci vfio_virqfd vfio_iommu_type1 vfio xt_CHECKSUM iptable_mangle 
ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat 
nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT 
nf_reject_ipv4 xt_tcpudp ebtable_filter ebtables ip6table_filter ip6_tables 
iptable_filter ip_tables x_tables bridge stp llc x86_pkg_temp_thermal 
intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul aesni_intel kvm_intel 
aes_x86_64 ipmi_ssif lrw gf128mul glue_helper ablk_helper cryptd serio_raw kvm 
sb_edac edac_core irqbypass hpilo ipmi_si 8250_fintek ioatdma ipmi_msghandler 
acpi_power_meter mac_hid lpc_ich shpchp sunrpc autofs4 mlx4_en
  [174453.001928]  psmouse ixgbe dca vxlan pata_acpi ip6_udp_tunnel udp_tunnel 
mdio hpsa mlx5_core tg3 scsi_transport_sas mlx4_core ptp pps_core wmi fjes
  [174453.002011] CPU: 2 PID: 40824 Comm: ethtool Tainted: G   OE   
4.4.0-11-generic #26-Ubuntu
  [174453.002026] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 12/20/2013
  [174453.002037] task: 8800bd919b80 ti: 880814d74000 task.ti: 
880814d74000
  [174453.002072] RIP: 0010:[]  [] 
mlx5e_set_coalesce+0x6e/0x100 [mlx5_core]
  [174453.002119] RSP: 0018:880814d77c30  EFLAGS: 00010246
  [174453.002141] RAX:  RBX: 880816e0 RCX: 

  [174453.002176] RDX:  RSI: 880814d77c74 RDI: 
880814e6
  [174453.002210] RBP: 880814d77c60 R08: 81e42520 R09: 
ff00
  [174453.002245] R10: 0533 R11: 0246 R12: 
880814d77c74
  [174453.002280] R13: 880814e6 R14:  R15: 
880814e6
  [174453.002316] FS:  7f7e927f7700() GS:88081f68() 
knlGS:
  [174453.002352] CS:  0010 DS:  ES:  CR0: 80050033
  [174453.002374] CR2:  CR3: 000818365000 CR4: 
001406e0
  [174453.002409] Stack:
  [174453.002427]  17a4b290 880814e6 000600114bb3 
000f
  [174453.002476]  8946 880814e6 880814d77ce0 
8171784a
  [174453.002525]  000f0010 00200010  
00200010
  [174453.002574] Call Trace:
  [174453.002597]  [] ethtool_set_coalesce+0x5a/0x80
  [174453.002621]  [] dev_ethtool+0xe78/0x1d70
  [174453.002645]  [] ? page_cache_async_readahead+0x6b/0x70
  [174453.002670]  [] ? page_add_file_rmap+0x25/0x60
  [174453.002694]  [] ? __rtnl_unlock+0x15/0x20
  [174453.002717]  [] ? netdev_run_todo+0x61/0x320
  [174453.002741]  [] dev_ioctl+0x182/0x580
  [174453.002765]  [] sock_do_ioctl+0x42/0x50
  [174453.002788]  [] sock_ioctl+0x1d2/0x290
  [174453.002811]  [] do_vfs_ioctl+0x29f/0x490
  [174453.003136]  [] ? __do_page_fault+0x1b4/0x400
  [174453.003161]  [] ? fd_install+0x25/0x30
  [174453.003183]  [] SyS_ioctl+0x79/0x90
  [174453.003208]  [] 

[Kernel-packages] [Bug 1557950] Re: mlx5_core kernel trace after "ethtool -C eth1 adaptive-rx on" flow

[Talat Batheesh]

** Patch added: "0002-net-mlx5e-Don-t-modify-CQ-before-it-was-created.patch"
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1557950/+attachment/4600895/+files/0002-net-mlx5e-Don-t-modify-CQ-before-it-was-created.patch

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557950

Title:
  mlx5_core kernel trace after "ethtool -C eth1 adaptive-rx on" flow

Status in linux package in Ubuntu:
  New

Bug description:
  reproduce steps:
  # ethtool -c eth1 
  Coalesce parameters for eth1: 
  Adaptive RX: off TX: off

  # ethtool -C eth1 adaptive-rx on


  
  # cat /etc/os-release
  NAME="Ubuntu"
  VERSION="16.04 (Xenial Xerus)"
  ID=ubuntu
  ID_LIKE=debian
  PRETTY_NAME="Ubuntu 16.04"
  VERSION_ID="16.04"
  HOME_URL="http://www.ubuntu.com/;
  SUPPORT_URL="http://help.ubuntu.com/;
  BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/;
  UBUNTU_CODENAME=xenial

  # uname -a
  Linux dev-h-vrt-006 4.4.0-11-generic #26-Ubuntu SMP Sat Mar 5 14:25:21 UTC 
2016 x86_64 x86_64 x86_64 GNU/Linux

  
  #dmesg 
  [174430.803529] mst_pci: module verification failed: signature and/or 
required key missing - tainting kernel  
   
  [174453.001485] BUG: unable to handle kernel NULL pointer dereference at  
 (null) 
   
  [174453.001509] IP: [] mlx5e_set_coalesce+0x6e/0x100 
[mlx5_core] 
  
  [174453.001535] PGD 81a5c7067 PUD 81aa93067 PMD 0 

   
  [174453.001556] Oops:  [#1] SMP
  [174453.001571] Modules linked in: mst_pciconf(OE) mst_pci(OE) nfsv3 nfs_acl 
rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache mlx5_ib ib_core 
ib_addr vfio_pci vfio_virqfd vfio_iommu_type1 vfio xt_CHECKSUM iptable_mangle 
ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat 
nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT 
nf_reject_ipv4 xt_tcpudp ebtable_filter ebtables ip6table_filter ip6_tables 
iptable_filter ip_tables x_tables bridge stp llc x86_pkg_temp_thermal 
intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul aesni_intel kvm_intel 
aes_x86_64 ipmi_ssif lrw gf128mul glue_helper ablk_helper cryptd serio_raw kvm 
sb_edac edac_core irqbypass hpilo ipmi_si 8250_fintek ioatdma ipmi_msghandler 
acpi_power_meter mac_hid lpc_ich shpchp sunrpc autofs4 mlx4_en
  [174453.001928]  psmouse ixgbe dca vxlan pata_acpi ip6_udp_tunnel udp_tunnel 
mdio hpsa mlx5_core tg3 scsi_transport_sas mlx4_core ptp pps_core wmi fjes
  [174453.002011] CPU: 2 PID: 40824 Comm: ethtool Tainted: G   OE   
4.4.0-11-generic #26-Ubuntu
  [174453.002026] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 12/20/2013
  [174453.002037] task: 8800bd919b80 ti: 880814d74000 task.ti: 
880814d74000
  [174453.002072] RIP: 0010:[]  [] 
mlx5e_set_coalesce+0x6e/0x100 [mlx5_core]
  [174453.002119] RSP: 0018:880814d77c30  EFLAGS: 00010246
  [174453.002141] RAX:  RBX: 880816e0 RCX: 

  [174453.002176] RDX:  RSI: 880814d77c74 RDI: 
880814e6
  [174453.002210] RBP: 880814d77c60 R08: 81e42520 R09: 
ff00
  [174453.002245] R10: 0533 R11: 0246 R12: 
880814d77c74
  [174453.002280] R13: 880814e6 R14:  R15: 
880814e6
  [174453.002316] FS:  7f7e927f7700() GS:88081f68() 
knlGS:
  [174453.002352] CS:  0010 DS:  ES:  CR0: 80050033
  [174453.002374] CR2:  CR3: 000818365000 CR4: 
001406e0
  [174453.002409] Stack:
  [174453.002427]  17a4b290 880814e6 000600114bb3 
000f
  [174453.002476]  8946 880814e6 880814d77ce0 
8171784a
  [174453.002525]  000f0010 00200010  
00200010
  [174453.002574] Call Trace:
  [174453.002597]  [] ethtool_set_coalesce+0x5a/0x80
  [174453.002621]  [] dev_ethtool+0xe78/0x1d70
  [174453.002645]  [] ? page_cache_async_readahead+0x6b/0x70
  [174453.002670]  [] ? page_add_file_rmap+0x25/0x60
  [174453.002694]  [] ? __rtnl_unlock+0x15/0x20
  [174453.002717]  [] ? netdev_run_todo+0x61/0x320
  [174453.002741]  [] dev_ioctl+0x182/0x580
  [174453.002765]  [] sock_do_ioctl+0x42/0x50
  [174453.002788]  [] sock_ioctl+0x1d2/0x290
  [174453.002811]  [] do_vfs_ioctl+0x29f/0x490
  [174453.003136]  [] ? __do_page_fault+0x1b4/0x400
  [174453.003161]  [] ? fd_install+0x25/0x30
  [174453.003183]  [] SyS_ioctl+0x79/0x90
  [174453.003208]  [] 

[Kernel-packages] [Bug 1557508] bantam (amd64) - tests ran: 182, failed: 0

[Brad Figg]

tests ran: 182, failed: 0;
  
http://kernel.ubuntu.com/testing/4.4.0-14.30/bantam__4.4.0-14.30__2016-03-16_05-34-00/results-index.html

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557508

Title:
  linux: 4.4.0-14.30 -proposed tracker

Status in Kernel Development Workflow:
  In Progress
Status in Kernel Development Workflow automated-testing series:
  Incomplete
Status in Kernel Development Workflow prepare-package series:
  Fix Released
Status in Kernel Development Workflow prepare-package-meta series:
  Fix Released
Status in Kernel Development Workflow prepare-package-signed series:
  Fix Released
Status in Kernel Development Workflow promote-to-proposed series:
  Fix Released
Status in Kernel Development Workflow promote-to-release series:
  New
Status in Kernel Development Workflow regression-testing series:
  New
Status in linux package in Ubuntu:
  New
Status in linux source package in Xenial:
  New

Bug description:
  This bug is for tracking the 4.4.0-14.30 upload package. This bug will
  contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-Prepare-package-start:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase-changed:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase:Prepare
  kernel-stable-Promote-to-proposed-end:Tuesday, 15. March 2016 13:00 UTC
  proposed-announcement-sent:True

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-development-workflow/+bug/1557508/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1554003] Re: xenial kernel crash on HP BL460c G7 (qla24xx problem?)

[Attila Zsiros]

I try 4.4.0-4.18~lp1554003Commitb1aa887df kernel, is good!

Attached dmesg.

** Attachment added: 
"dmesg-linux-headers-4.4.0-4-generic-lp1554003Commitb1aa887df.txt"
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1554003/+attachment/4600881/+files/dmesg-linux-headers-4.4.0-4-generic-lp1554003Commitb1aa887df.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1554003

Title:
  xenial kernel crash on HP BL460c G7 (qla24xx problem?)

Status in linux package in Ubuntu:
  In Progress
Status in linux source package in Xenial:
  In Progress

Bug description:
  Dear Members,

  Latest Xenial kernel (linux-image-generic-4.4.0-8-generic) is crash on
  booting. Same problem with 4.4.0-9 and 4.4.0-10.

  
  [1.654419] qla2xxx [:06:00.1]-0034:3: MSI-X: Unsupported ISP 
  2432 SSVID/SSDID (0x103C,0x1705).
  [1.685273] hid-generic 0003:03F0:7029.0001: in
  [1.685273] hid-generic 0003:03F0:7029.0001: input,hidraw0: USB HID 
  v1.01 Keyboard [HP  Virtual Keyboard ] on usb-:01:00.4-1/input0
  [1.685455] input: HP  Virtual Keyboard  as 
  
/devices/pci:00/:00:1c.4/:01:00.4/usb6/6-1/6-1:1.1/0003:03F0:7029.0002/input/inpu
 
  1048576 bytes) :0
  1:00.4/usb6/6-1/6-1:1.1/0003:03F0:7029.0002/input/inpu
  [2.001109] CR2: 0050
  [2.001170] ---
  [ end trace 20a247b9d60f8e00 ]---
  [2.001232] Kernel panic - not syncing: Fatal exception in interrup
  [2.001232] Kernel panic - not syncing: Fatal exception in interrupt
  [2.001813] Kernel Offset: disabled
  [2.001873] ---
  [ end Kernel panic - not syncing: Fatal exception in interrupt
  [1.997314]  [] do_IRQ+0x4b/0xd0
  [1.997379]  [] common_interrupt+0x82/0x82
  [1.997441]  
  [1.997336] hpsa :0c:00.0: scsi 1:3:0:0: added RAID  HP
  [1.997491]  [] ? cpuidle_enter_state+0x12d/0x270
  [1.997609]  [] cpuidle_enter+0x17/0x20
  [1.997674]  [] call_cpuidle+0x32/0x60
  [1.997737]  [] ? cpuidle_select+0x13/0x20
  [1.997800]  [] cpu_startup_entry+0x266/0x320
  [1.997866]  [] rest_init+0x7c/0x80
  [1.997930]  [] start_kernel+0x481/0x4a2
  [1.997994]  [] ? early_idt_handler_array+0x120/0x120
  [1.998058]  [] x86_64_start_reservations+0x2a/0x2c
  [1.998123]  [] x86
  [1.998123]  [] x86_64_start_kernel+0x14a/0x16d
  [1.998186] Code: 00 48 89 45 d0 31 c0 48 8b 47 58 a8 02 0f 84 cf 00 
  00 00 48 8b 46 50 49 89 fd 49 89 f4 65 8b 15 06 34 e7 3f 4c 8b b7 10 02 
  00 00 <39> 50 50 74 11
89 50 50 48 8b 46 50 8b 40 50 41 89 86 58 8put,hidraw0: USB HID v1.01 
  Key 74 11 89 50 50 48 8b 46 50 8b 40 50 41 89 86 58 8b 00
  [2.000922] RIP  [] 
  qla24xx_process_response_queue+0x49/0x4a0 [qla2xxx]
  [2.001050]  RSP 
  hpiLO-> exit

  Best regards Attila
  --- 
  AlsaDevices: Error: command ['ls', '-l', '/dev/snd/'] failed with exit code 
2: ls: cannot access '/dev/snd/': No such file or directory
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 2.20-0ubuntu3
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/dsp3', '/dev/dsp1', 
'/dev/dsp2', '/dev/dsp', '/dev/sequencer'] failed with exit code 1:
  DistroRelease: Ubuntu 16.04
  InstallationDate: Installed on 2016-02-03 (32 days ago)
  InstallationMedia: Ubuntu-Server 14.04.3 LTS "Trusty Tahr" - Beta amd64 
(20150805)
  MachineType: HP ProLiant BL460c G7
  NonfreeKernelModules: raid10 raid456 async_raid6_recov async_memcpy async_pq 
async_xor async_tx xor raid6_pq raid1 raid0 multipath linear be2iscsi qla2xxx 
iscsi_boot_sysfs libiscsi ipmi_si hpsa scsi_transport_fc scsi_transport_iscsi 
ipmi_msghandler 8021q garp stp mrp llc ghash_clmulni_intel hid_generic be2net 
aesni_intel aes_x86_64 ablk_helper usbhid cryptd lrw vxlan gf128mul 
ip6_udp_tunnel glue_helper usb_storage hid udp_tunnel
  Package: linux (not installed)
  PciMultimedia:
   
  ProcEnviron:
   LANGUAGE=en_US:en
   TERM=bterm
   PATH=(custom, no user)
   LANG=C.UTF-8
   SHELL=/bin/sh
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=linux priority=low vga=788 initrd=initrd.gz ---
  ProcVersionSignature: Ubuntu 4.2.0-16.19-generic 4.2.3
  RelatedPackageVersions:
   linux-restricted-modules-4.2.0-16-generic N/A
   linux-backports-modules-4.2.0-16-generic  N/A
   linux-firmware1.156
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  xenial
  Uname: Linux 4.2.0-16-generic x86_64
  UpgradeStatus: Upgraded to xenial on 2016-02-04 (31 days ago)
  UserGroups:
   
  _MarkForUpload: True
  dmi.bios.date: 05/05/2011
  dmi.bios.vendor: HP
  dmi.bios.version: I27
  dmi.chassis.type: 28
  dmi.chassis.vendor: HP
  dmi.modalias: 
dmi:bvnHP:bvrI27:bd05/05/2011:svnHP:pnProLiantBL460cG7:pvr:cvnHP:ct28:cvr:
  dmi.product.name: ProLiant BL460c G7
  dmi.sys.vendor: HP

To manage 

[Kernel-packages] [Bug 1553882] Re: GPU hangs after resume from suspend

[Reinis Zumbergs]

Ah, of course, I have to install the corresponding headers too, so that
DKMS module gets built. Now I'll run daily on the latest kernel, that
will increase the testability.

Additional symptom to the bug report. Sometimes instead of freezeing,
GPU accelerated windows get kinda disturbed - flickering and artefacts
on screen.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1553882

Title:
  GPU hangs after resume from suspend

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  1) Xenial 64 bit
  2) linux-headers-generic 4.4.0.10.11
  3) Graphics hardware acceleration should still work after resume from suspend
  4) Chrome gets frozen, glxgears does not work, games do not launch etc.

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: linux-image-4.4.0-10-generic 4.4.0-10.25
  ProcVersionSignature: Ubuntu 4.4.0-10.25-generic 4.4.3
  Uname: Linux 4.4.0-10-generic x86_64
  ApportVersion: 2.20-0ubuntu3
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/pcmC0D0p:   roodis 3367 F...m pulseaudio
   /dev/snd/controlC0:  roodis 3367 F pulseaudio
  CurrentDesktop: XFCE
  Date: Sun Mar  6 21:24:11 2016
  HibernationDevice: RESUME=UUID=feac0ff7-9251-4be0-ad43-e4fb37779bf3
  InstallationDate: Installed on 2016-02-26 (8 days ago)
  InstallationMedia: Xubuntu 16.04 LTS "Xenial Xerus" - Alpha amd64 (20160224)
  MachineType: Dell Inc. Latitude E5520
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-10-generic 
root=UUID=353d3ce7-d2fc-407d-9490-53dd3714fb39 ro noprompt persistent quiet 
splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-4.4.0-10-generic N/A
   linux-backports-modules-4.4.0-10-generic  N/A
   linux-firmware1.156
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 12/26/2013
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: A14
  dmi.board.asset.tag: Min tie
  dmi.board.name: 03PH4G
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A01
  dmi.chassis.asset.tag: Min tie
  dmi.chassis.type: 9
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: 
dmi:bvnDellInc.:bvrA14:bd12/26/2013:svnDellInc.:pnLatitudeE5520:pvr01:rvnDellInc.:rn03PH4G:rvrA01:cvnDellInc.:ct9:cvr:
  dmi.product.name: Latitude E5520
  dmi.product.version: 01
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1553882/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1507689] Re: Shaky screen on Lenovo Y70 Touch

[Per Olav Kroka]

Seems that changing kernel worked.  Now running with kernel version
3.19.0-031900.

uname -a gives
Linux pok-Lenovo-Y70-70-Touch 3.19.0-031900-generic #201504091832 SMP Thu Apr 9 
17:35:46 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1507689

Title:
  Shaky screen on Lenovo Y70 Touch

Status in linux package in Ubuntu:
  Expired

Bug description:
  I have a relatively new Lenovo Y70 Touch (came preinstalled with
  Win8).  I installed Ubuntu 14.04 on it.

  By "Shaky" (in the headline) I mean that the image shakes from side to
  side (it seems) about 3 points. Some points end up at the end of the
  previous line.  Very annoying to look at.  Before changing anything,
  the screen driver seems to be an intel driver.  (There is a combined
  NVidia and Intel screen card.)  It is also possible to change the
  screen backlight by using the buttons.

  Searching on the web I found that I could add "nomodeset" to the
  kernel command line.  Doing this stabilizes the screen, but the
  control of the screen backlight disappears.

  If I in addition add "acpi_osi=Linux" and "acpi_backlight=vendor", the
  backlight-control app seems to be back, but there is no reaction to
  any changes. "ls  /sys/class/backlight" now shows the name ideapad.

  Along the way to the current workaround, I have had bumblebee and some
  other software installed and automatically removed as it was not
  needed.

  I believe this applies to other distributions as well.

  Numbered questions and answers (found under "We also need:" in th
  1) Output from "lsb_release -rd":
  Description:  Ubuntu 14.04.3 LTS
  Release:  14.04

  2) Outut from "apt-cache policy linux*":
  see attached file "policy"

  3) What I expect to happen:
a. That the screen would be stabile from the start of the installation
b. That the backlight control would be available from the start of the 
installation and not disappear.

  4) What happened instead:
a. The screen was "shaking" from the start.  (Not a stabile image at all.)
b. After adding a fix (see above) the screen became stabile but the screen 
backlight control disappeared.  No remedy has been found for this.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.16.0-50-generic 3.16.0-50.67~14.04.1
  ProcVersionSignature: Ubuntu 3.16.0-50.67~14.04.1-generic 3.16.7-ckt16
  Uname: Linux 3.16.0-50-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.15
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Mon Oct 19 16:34:08 2015
  InstallationDate: Installed on 2015-06-11 (130 days ago)
  InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 
(20150218.1)
  SourcePackage: linux-lts-utopic
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1507689/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1541496] Re: Synaptics Touchpad does not work on C15b notebook

[Christopher M. Penalver]

** Changed in: linux (Ubuntu)
   Importance: Medium => High

** Changed in: linux (Ubuntu)
   Status: Incomplete => Triaged

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1541496

Title:
  Synaptics Touchpad does not work on C15b notebook

Status in linux package in Ubuntu:
  Triaged

Bug description:
  After installing Ubuntu 14.04 LTS (Description:   Ubuntu 14.04.3 LTS, 
Release:14.04)
  on my Pegatron C15b notebook, the touchpad does not work. This is a dual-boot 
system, with Windows 10. On Windows 10, the Touchpad works fine.
  I am also attaching a list of the devices, acquired via cat 
/proc/bus/input/devices > ~/devices
  Thank you in advance,
  Evy Karavatselou

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.19.0-49-generic 3.19.0-49.55~14.04.1
  ProcVersionSignature: Ubuntu 3.19.0-49.55~14.04.1-generic 3.19.8-ckt12
  Uname: Linux 3.19.0-49-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Feb  3 18:39:57 2016
  InstallationDate: Installed on 2015-11-28 (67 days ago)
  InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  SourcePackage: linux-lts-vivid
  UpgradeStatus: Upgraded to trusty on 2016-02-02 (0 days ago)
  ---
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  evy1991 F pulseaudio
   /dev/snd/controlC0:  evy1991 F pulseaudio
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=fde56f96-3316-49fe-938e-7b6cf461984a
  InstallationDate: Installed on 2015-11-28 (99 days ago)
  InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  MachineType: PEGATRON CORPORATION C15B
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-51-generic.efi.signed 
root=UUID=140b6e5c-90b9-485b-930a-bd1bc953c21d ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.19.0-51.58~14.04.1-generic 3.19.8-ckt13
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-51-generic N/A
   linux-backports-modules-3.19.0-51-generic  N/A
   linux-firmware 1.127.20
  Tags:  trusty
  Uname: Linux 3.19.0-51-generic x86_64
  UpgradeStatus: Upgraded to trusty on 2016-02-02 (33 days ago)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 03/18/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: C15B.616
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: C15B
  dmi.board.vendor: PEGATRON CORPORATION
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: PEGATRON Computer Inc.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrC15B.616:bd03/18/2014:svnPEGATRONCORPORATION:pnC15B:pvr1.0:rvnPEGATRONCORPORATION:rnC15B:rvr1.0:cvnPEGATRONComputerInc.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: C15B
  dmi.product.version: 1.0
  dmi.sys.vendor: PEGATRON CORPORATION

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1541496/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557924] Re: Machine fails to resume from suspend

[Christopher M. Penalver]

Johann Götz, thank you for reporting this and helping make Ubuntu
better.

In order to allow additional upstream developers to examine the issue, at your 
earliest convenience, could you please test the latest upstream kernel 
available from http://kernel.ubuntu.com/~kernel-ppa/mainline/?C=N;O=D ? Please 
keep in mind the following:
1) The one to test is at the very top line at the top of the page (not the 
daily folder).
2) The release names are irrelevant.
3) The folder time stamps aren't indicative of when the kernel actually was 
released upstream.
4) Install instructions are available at 
https://wiki.ubuntu.com/Kernel/MainlineBuilds .

If testing on your main install would be inconvenient, one may:
1) Install Ubuntu to a different partition and then test this there.
2) Backup, or clone the primary install.

If the latest kernel did not allow you to test to the issue (ex. you couldn't 
boot into the OS) please make a comment in your report about this, and continue 
to test the next most recent kernel version until you can test to the issue. 
Once you've tested the upstream kernel, please comment on which kernel version 
specifically you tested. If this issue is fixed in the mainline kernel, please 
add the following tags by clicking on the yellow circle with a black pencil 
icon, next to the word Tags, located at the bottom of the report description:
kernel-fixed-upstream
kernel-fixed-upstream-X.Y-rcZ

Where X, and Y are the first two numbers of the kernel version, and Z is
the release candidate number if it exists.

If the mainline kernel does not fix the issue, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-X.Y-rcZ

Please note, an error to install the kernel does not fit the criteria of
kernel-bug-exists-upstream.

Also, you don't need to apport-collect further unless specifically
requested to do so.

Once testing of the latest upstream kernel is complete, please mark this
report Status Confirmed. Please let us know your results.

Thank you for your understanding.

** Tags added: latest-bios-1.13

** Tags added: regression-release

** Changed in: linux (Ubuntu)
   Importance: Undecided => Medium

** Changed in: linux (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557924

Title:
  Machine fails to resume from suspend

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  My machine (HP zbook 14 G2, http://store.hp.com/us/en/pdp/business-
  solutions/hp-zbook-14-g2-mobile-workstation-%28energy-star%29) fails
  to resume from suspend since kernel version 4.4.0-12. Version 4.4.0-10
  still works fine (I don't know about *-11).

  Below are the last log messages before machine suspended:

  Mär 14 20:54:23 moebius wpa_supplicant[888]: p2p-dev-wlo1: 
CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD
  Mär 14 20:54:23 moebius dbus[699]: [system] Rejected send message, 10 matched 
rules; type="method_return", sender=":1.92" (uid=0 pid=1533 
comm="/usr/sbin/dnsmasq --no-resolv --keep-in-foreground") i
  Mär 14 20:54:23 moebius NetworkManager[623]:  NetworkManager state is 
now ASLEEP
  Mär 14 20:54:23 moebius whoopsie[649]: [20:54:23] Cannot reach: 
https://daisy.ubuntu.com
  Mär 14 20:54:23 moebius wpa_supplicant[888]: nl80211: deinit 
ifname=p2p-dev-wlo1 disabled_11b_rates=0
  Mär 14 20:54:23 moebius NetworkManager[623]:  Failed to 
GDBus.Error:fi.w1.wpa_supplicant1.NotConnected: This interface is not 
connected: disconnect.
  Mär 14 20:54:23 moebius dbus[699]: [system] Activating via systemd: service 
name='org.freedesktop.nm_dispatcher' 
unit='dbus-org.freedesktop.nm-dispatcher.service'
  Mär 14 20:54:23 moebius systemd[1]: Reached target Sleep.
  Mär 14 20:54:23 moebius systemd[1]: Starting Suspend...
  Mär 14 20:54:23 moebius systemd[1]: Starting Network Manager Script 
Dispatcher Service...
  Mär 14 20:54:23 moebius dbus[699]: [system] Successfully activated service 
'org.freedesktop.nm_dispatcher'
  Mär 14 20:54:23 moebius systemd[1]: Started Network Manager Script Dispatcher 
Service.
  Mär 14 20:54:23 moebius nm-dispatcher[1910]: Dispatching action 'down' for 
wlo1
  Mär 14 20:54:23 moebius wpa_supplicant[888]: nl80211: deinit ifname=wlo1 
disabled_11b_rates=0
  Mär 14 20:54:25 moebius bluetoothd[655]: Endpoint unregistered: sender=:1.56 
path=/MediaEndpoint/A2DPSource
  Mär 14 20:54:25 moebius bluetoothd[655]: Endpoint unregistered: sender=:1.56 
path=/MediaEndpoint/A2DPSink
  Mär 14 20:54:27 moebius org.gnome.zeitgeist.Engine[1243]: ** 
(zeitgeist-datahub:1958): WARNING **: zeitgeist-datahub.vala:229: Unable to get 
name "org.gnome.zeitgeist.datahub" on the bus!
  Mär 14 20:54:27 moebius gnome-session[1359]: ** (zeitgeist-datahub:1936): 
WARNING **: kde-recent-document-provider.vala:174: Couldn't find actor for 
'okular'.
  Mär 14 20:54:33 moebius systemd-sleep[1908]: Selected interface 'wlo1'
  

[Kernel-packages] [Bug 1557508] onza (amd64) - tests ran: 185, failed: 3

[Brad Figg]

tests ran: 185, failed: 3;
  
http://kernel.ubuntu.com/testing/4.4.0-14.30/onza__4.4.0-14.30__2016-03-16_05-19-00/results-index.html

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557508

Title:
  linux: 4.4.0-14.30 -proposed tracker

Status in Kernel Development Workflow:
  In Progress
Status in Kernel Development Workflow automated-testing series:
  Incomplete
Status in Kernel Development Workflow prepare-package series:
  Fix Released
Status in Kernel Development Workflow prepare-package-meta series:
  Fix Released
Status in Kernel Development Workflow prepare-package-signed series:
  Fix Released
Status in Kernel Development Workflow promote-to-proposed series:
  Fix Released
Status in Kernel Development Workflow promote-to-release series:
  New
Status in Kernel Development Workflow regression-testing series:
  New
Status in linux package in Ubuntu:
  New
Status in linux source package in Xenial:
  New

Bug description:
  This bug is for tracking the 4.4.0-14.30 upload package. This bug will
  contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-Prepare-package-start:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase-changed:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase:Prepare
  kernel-stable-Promote-to-proposed-end:Tuesday, 15. March 2016 13:00 UTC
  proposed-announcement-sent:True

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-development-workflow/+bug/1557508/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557873] Re: task btrfs-transacti:1089 blocked for more than 120 seconds

[Martin Pitt]

There is no symptom or error description in your report at all. Dmesg
shows that the btrfs task is hung, but there's still not much to go
with.

** Summary changed:

- Systemd crash
+ task btrfs-transacti:1089 blocked for more than 120 seconds

** Package changed: systemd (Ubuntu) => linux (Ubuntu)

** Changed in: linux (Ubuntu)
   Status: New => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557873

Title:
  task btrfs-transacti:1089 blocked for more than 120 seconds

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  No further information, it popped up to report a an issue, and it was
  systemd I submitted.

  ProblemType: Bug
  DistroRelease: Ubuntu 15.10
  Package: systemd 225-1ubuntu9 [modified: 
usr/share/dbus-1/system-services/org.freedesktop.systemd1.service]
  Uname: Linux 4.5.0-040500rc7-generic x86_64
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  CurrentDesktop: XFCE
  Date: Tue Mar 15 22:14:45 2016
  InstallationDate: Installed on 2015-05-10 (311 days ago)
  InstallationMedia: Ubuntu-Server 15.04 "Vivid Vervet" - Release amd64 
(20150422)
  MachineType: Gigabyte Technology Co., Ltd. To be filled by O.E.M.
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.5.0-040500rc7-generic 
root=UUID=51a981ad-aeb0-4bd7-91c6-2d493155c812 ro rootflags=subvol=@ 
crashkernel=384M-2G:64M,2G-:128M crashkernel=384M-:128M
  SourcePackage: systemd
  UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
  UpgradeStatus: Upgraded to wily on 2015-10-26 (142 days ago)
  dmi.bios.date: 01/06/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: F18i
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: Z77X-D3H
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrF18i:bd01/06/2014:svnGigabyteTechnologyCo.,Ltd.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnGigabyteTechnologyCo.,Ltd.:rnZ77X-D3H:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: To be filled by O.E.M.
  dmi.product.version: To be filled by O.E.M.
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1557873/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557508] onibi (amd64) - tests ran: 182, failed: 0

[Brad Figg]

tests ran: 182, failed: 0;
  
http://kernel.ubuntu.com/testing/4.4.0-14.30/onibi__4.4.0-14.30__2016-03-16_05-31-00/results-index.html

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557508

Title:
  linux: 4.4.0-14.30 -proposed tracker

Status in Kernel Development Workflow:
  In Progress
Status in Kernel Development Workflow automated-testing series:
  Incomplete
Status in Kernel Development Workflow prepare-package series:
  Fix Released
Status in Kernel Development Workflow prepare-package-meta series:
  Fix Released
Status in Kernel Development Workflow prepare-package-signed series:
  Fix Released
Status in Kernel Development Workflow promote-to-proposed series:
  Fix Released
Status in Kernel Development Workflow promote-to-release series:
  New
Status in Kernel Development Workflow regression-testing series:
  New
Status in linux package in Ubuntu:
  New
Status in linux source package in Xenial:
  New

Bug description:
  This bug is for tracking the 4.4.0-14.30 upload package. This bug will
  contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-Prepare-package-start:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase-changed:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase:Prepare
  kernel-stable-Promote-to-proposed-end:Tuesday, 15. March 2016 13:00 UTC
  proposed-announcement-sent:True

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-development-workflow/+bug/1557508/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557873] [NEW] task btrfs-transacti:1089 blocked for more than 120 seconds

[Launchpad Bug Tracker]

You have been subscribed to a public bug:

No further information, it popped up to report a an issue, and it was
systemd I submitted.

ProblemType: Bug
DistroRelease: Ubuntu 15.10
Package: systemd 225-1ubuntu9 [modified: 
usr/share/dbus-1/system-services/org.freedesktop.systemd1.service]
Uname: Linux 4.5.0-040500rc7-generic x86_64
ApportVersion: 2.19.1-0ubuntu5
Architecture: amd64
CurrentDesktop: XFCE
Date: Tue Mar 15 22:14:45 2016
InstallationDate: Installed on 2015-05-10 (311 days ago)
InstallationMedia: Ubuntu-Server 15.04 "Vivid Vervet" - Release amd64 (20150422)
MachineType: Gigabyte Technology Co., Ltd. To be filled by O.E.M.
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.5.0-040500rc7-generic 
root=UUID=51a981ad-aeb0-4bd7-91c6-2d493155c812 ro rootflags=subvol=@ 
crashkernel=384M-2G:64M,2G-:128M crashkernel=384M-:128M
SourcePackage: systemd
UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
UpgradeStatus: Upgraded to wily on 2015-10-26 (142 days ago)
dmi.bios.date: 01/06/2014
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: F18i
dmi.board.asset.tag: To be filled by O.E.M.
dmi.board.name: Z77X-D3H
dmi.board.vendor: Gigabyte Technology Co., Ltd.
dmi.board.version: x.x
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 3
dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrF18i:bd01/06/2014:svnGigabyteTechnologyCo.,Ltd.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnGigabyteTechnologyCo.,Ltd.:rnZ77X-D3H:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvrToBeFilledByO.E.M.:
dmi.product.name: To be filled by O.E.M.
dmi.product.version: To be filled by O.E.M.
dmi.sys.vendor: Gigabyte Technology Co., Ltd.

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: Incomplete


** Tags: amd64 apport-bug wily
-- 
task btrfs-transacti:1089 blocked for more than 120 seconds
https://bugs.launchpad.net/bugs/1557873
You received this bug notification because you are a member of Kernel Packages, 
which is subscribed to linux in Ubuntu.

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1541496] Re: Synaptics Touchpad does not work on C15b notebook

[Evy Karavatselou]

Hello Christopher,

I tested the v4.5-wily kernel, but the problem remains.
I  added the tags you suggested:

kernel-bug-exists-upstream
kernel-bug-exists-upstream-4.5


Thank you


** Attachment added: "usb-devices"
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1541496/+attachment/4600860/+files/usb-devices.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1541496

Title:
  Synaptics Touchpad does not work on C15b notebook

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  After installing Ubuntu 14.04 LTS (Description:   Ubuntu 14.04.3 LTS, 
Release:14.04)
  on my Pegatron C15b notebook, the touchpad does not work. This is a dual-boot 
system, with Windows 10. On Windows 10, the Touchpad works fine.
  I am also attaching a list of the devices, acquired via cat 
/proc/bus/input/devices > ~/devices
  Thank you in advance,
  Evy Karavatselou

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.19.0-49-generic 3.19.0-49.55~14.04.1
  ProcVersionSignature: Ubuntu 3.19.0-49.55~14.04.1-generic 3.19.8-ckt12
  Uname: Linux 3.19.0-49-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  CurrentDesktop: Unity
  Date: Wed Feb  3 18:39:57 2016
  InstallationDate: Installed on 2015-11-28 (67 days ago)
  InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  SourcePackage: linux-lts-vivid
  UpgradeStatus: Upgraded to trusty on 2016-02-02 (0 days ago)
  ---
  ApportVersion: 2.14.1-0ubuntu3.19
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC1:  evy1991 F pulseaudio
   /dev/snd/controlC0:  evy1991 F pulseaudio
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=fde56f96-3316-49fe-938e-7b6cf461984a
  InstallationDate: Installed on 2015-11-28 (99 days ago)
  InstallationMedia: Ubuntu 14.04.3 LTS "Trusty Tahr" - Beta amd64 (20150805)
  MachineType: PEGATRON CORPORATION C15B
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-51-generic.efi.signed 
root=UUID=140b6e5c-90b9-485b-930a-bd1bc953c21d ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 3.19.0-51.58~14.04.1-generic 3.19.8-ckt13
  RelatedPackageVersions:
   linux-restricted-modules-3.19.0-51-generic N/A
   linux-backports-modules-3.19.0-51-generic  N/A
   linux-firmware 1.127.20
  Tags:  trusty
  Uname: Linux 3.19.0-51-generic x86_64
  UpgradeStatus: Upgraded to trusty on 2016-02-02 (33 days ago)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 03/18/2014
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: C15B.616
  dmi.board.asset.tag: ATN12345678901234567
  dmi.board.name: C15B
  dmi.board.vendor: PEGATRON CORPORATION
  dmi.board.version: 1.0
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: PEGATRON Computer Inc.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrC15B.616:bd03/18/2014:svnPEGATRONCORPORATION:pnC15B:pvr1.0:rvnPEGATRONCORPORATION:rnC15B:rvr1.0:cvnPEGATRONComputerInc.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: C15B
  dmi.product.version: 1.0
  dmi.sys.vendor: PEGATRON CORPORATION

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1541496/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557924] [NEW] Machine fails to resume from suspend

[Johann Götz]

Public bug reported:

My machine (HP zbook 14 G2, http://store.hp.com/us/en/pdp/business-
solutions/hp-zbook-14-g2-mobile-workstation-%28energy-star%29) fails to
resume from suspend since kernel version 4.4.0-12. Version 4.4.0-10
still works fine (I don't know about *-11).

Below are the last log messages before machine suspended:

Mär 14 20:54:23 moebius wpa_supplicant[888]: p2p-dev-wlo1: 
CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD
Mär 14 20:54:23 moebius dbus[699]: [system] Rejected send message, 10 matched 
rules; type="method_return", sender=":1.92" (uid=0 pid=1533 
comm="/usr/sbin/dnsmasq --no-resolv --keep-in-foreground") i
Mär 14 20:54:23 moebius NetworkManager[623]:  NetworkManager state is now 
ASLEEP
Mär 14 20:54:23 moebius whoopsie[649]: [20:54:23] Cannot reach: 
https://daisy.ubuntu.com
Mär 14 20:54:23 moebius wpa_supplicant[888]: nl80211: deinit 
ifname=p2p-dev-wlo1 disabled_11b_rates=0
Mär 14 20:54:23 moebius NetworkManager[623]:  Failed to 
GDBus.Error:fi.w1.wpa_supplicant1.NotConnected: This interface is not 
connected: disconnect.
Mär 14 20:54:23 moebius dbus[699]: [system] Activating via systemd: service 
name='org.freedesktop.nm_dispatcher' 
unit='dbus-org.freedesktop.nm-dispatcher.service'
Mär 14 20:54:23 moebius systemd[1]: Reached target Sleep.
Mär 14 20:54:23 moebius systemd[1]: Starting Suspend...
Mär 14 20:54:23 moebius systemd[1]: Starting Network Manager Script Dispatcher 
Service...
Mär 14 20:54:23 moebius dbus[699]: [system] Successfully activated service 
'org.freedesktop.nm_dispatcher'
Mär 14 20:54:23 moebius systemd[1]: Started Network Manager Script Dispatcher 
Service.
Mär 14 20:54:23 moebius nm-dispatcher[1910]: Dispatching action 'down' for wlo1
Mär 14 20:54:23 moebius wpa_supplicant[888]: nl80211: deinit ifname=wlo1 
disabled_11b_rates=0
Mär 14 20:54:25 moebius bluetoothd[655]: Endpoint unregistered: sender=:1.56 
path=/MediaEndpoint/A2DPSource
Mär 14 20:54:25 moebius bluetoothd[655]: Endpoint unregistered: sender=:1.56 
path=/MediaEndpoint/A2DPSink
Mär 14 20:54:27 moebius org.gnome.zeitgeist.Engine[1243]: ** 
(zeitgeist-datahub:1958): WARNING **: zeitgeist-datahub.vala:229: Unable to get 
name "org.gnome.zeitgeist.datahub" on the bus!
Mär 14 20:54:27 moebius gnome-session[1359]: ** (zeitgeist-datahub:1936): 
WARNING **: kde-recent-document-provider.vala:174: Couldn't find actor for 
'okular'.
Mär 14 20:54:33 moebius systemd-sleep[1908]: Selected interface 'wlo1'
Mär 14 20:54:33 moebius systemd-sleep[1908]: 'SUSPEND' command timed out.
Mär 14 20:54:33 moebius systemd-sleep[1912]: 
/lib/systemd/system-sleep/wpasupplicant failed with error code 254.
Mär 14 20:54:33 moebius systemd-sleep[1908]: Suspending system...

ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: linux-image-4.4.0-12-generic 4.4.0-12.28
ProcVersionSignature: Ubuntu 4.4.0-12.28-generic 4.4.4
Uname: Linux 4.4.0-12-generic x86_64
ApportVersion: 2.20-0ubuntu3
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  johnny 1401 F pulseaudio
 /dev/snd/controlC1:  johnny 1401 F pulseaudio
CurrentDesktop: Unity
Date: Wed Mar 16 08:27:16 2016
HibernationDevice: RESUME=UUID=d987a311-b37d-44cf-9888-57b93b40cf51
InstallationDate: Installed on 2016-03-14 (1 days ago)
InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Alpha amd64 (20160307)
MachineType: Hewlett-Packard HP ZBook 14 G2
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.4.0-12-generic.efi.signed 
root=UUID=2b4e0fd5-152d-4456-8fce-fa2e8b77cebb ro quiet splash net.ifnames=0 
vt.handoff=7
RelatedPackageVersions:
 linux-restricted-modules-4.4.0-12-generic N/A
 linux-backports-modules-4.4.0-12-generic  N/A
 linux-firmware1.156
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 01/18/2016
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: M71 Ver. 01.13
dmi.board.name: 2216
dmi.board.vendor: Hewlett-Packard
dmi.board.version: KBC Version 96.58
dmi.chassis.asset.tag: 5CG54335T5
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.modalias: 
dmi:bvnHewlett-Packard:bvrM71Ver.01.13:bd01/18/2016:svnHewlett-Packard:pnHPZBook14G2:pvrA3008C510003:rvnHewlett-Packard:rn2216:rvrKBCVersion96.58:cvnHewlett-Packard:ct10:cvr:
dmi.product.name: HP ZBook 14 G2
dmi.product.version: A3008C510003
dmi.sys.vendor: Hewlett-Packard

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug xenial

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557924

Title:
  Machine fails to resume from suspend

Status in linux package in Ubuntu:
  New

Bug description:
  My machine (HP zbook 14 G2, http://store.hp.com/us/en/pdp/business-
  solutions/hp-zbook-14-g2-mobile-workstation-%28energy-star%29) fails
  to resume from suspend since kernel version 4.4.0-12. Version 4.4.0-10
  still 

[Kernel-packages] [Bug 1556471] Re: Connecting an Osprey 2 Mini (USB cellular wireless router) sometimes causes an endless reset loop or a kernel panic

[Christopher M. Penalver]

ais523, the issue you are reporting is an upstream one. Could you please
report this problem following the instructions verbatim at
https://wiki.ubuntu.com/Bugs/Upstream/kernel to the appropriate mailing
list (TO Greg Kroah-Hartman CC linux-usb)?

Please provide a direct URL to your post to the mailing list when it
becomes available so that it may be tracked.

Thank you for your understanding.

** Changed in: linux (Ubuntu)
   Status: Confirmed => Triaged

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1556471

Title:
  Connecting an Osprey 2 Mini (USB cellular wireless router) sometimes
  causes an endless reset loop or a kernel panic

Status in linux package in Ubuntu:
  Triaged

Bug description:
  Steps to reproduce (happens > 50% of the time, but not every time):

  Turn on an Osprey 2 Mini, and connect it to a USB port via a USB cable
  while both the device and computer are on (i.e. hotplug).

  Observed symptoms:
  - sometimes the Osprey 2 Mini goes into an endless reset loop (visible as the 
LEDs on the front of the device flashing rapidly), being reset approximately 
every 200ms; on such occasions, the Ubuntu user interface often reacts as 
though I'd inserted an audio CD containing corrupted data (e.g. via repeatedly 
adding an "Audio CD" icon to the launcher and then removing it, and putting up 
dialog boxes complaining about failure to read the data).
  - sometimes the kernel panics (often some time after the reset loop starts, 
perhaps up to 10 seconds); when this happens there was always or nearly always 
a reset loop occurring beforehand.
  - sometimes the device resets once or not at all, then works as expected 
(showing up as a network interface, and allowing me to communicate to the 
Internet with a wired connection); I'm currently using an Osprey 2 Mini for 
this purpose right now.

  The kernel panics lock up the entire system (forcing a hard power
  off). lt-Sysrq commands don't work in this state (even though I have
  them enabled), and sometimes the Caps Lock light flashes repeatedly.
  The logs end some time before the panic occurs.

  /var/log/syslog:
  
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1556471/+attachment/4598145/+files/syslog

  The reset loops also occurred when I was using Ubuntu vivid. The
  kernel panics only happened after an upgrade to wily. Output of lsusb
  -v is attached.

  ---
  ApportVersion: 2.19.1-0ubuntu5
  Architecture: amd64
  AudioDevicesInUse:
   USERPID ACCESS COMMAND
   /dev/snd/controlC0:  ais523 6233 F pulseaudio
  CurrentDesktop: Unity
  DistroRelease: Ubuntu 15.10
  HibernationDevice: RESUME=UUID=bfbc4bf8-2e40-4799-bbef-9c5044c87007
  InstallationDate: Installed on 2014-06-03 (648 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
  MachineType: Hewlett-Packard HP Pavilion 15 Notebook PC
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-32-generic.efi.signed 
root=UUID=e92d655d-cf36-4d45-90e7-30a0f9d0949e ro quiet splash
  ProcVersionSignature: Ubuntu 4.2.0-32.37-generic 4.2.8-ckt4
  RelatedPackageVersions:
   linux-restricted-modules-4.2.0-32-generic N/A
   linux-backports-modules-4.2.0-32-generic  N/A
   linux-firmware1.149.3
  RfKill:
   0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
  Tags:  wily
  Uname: Linux 4.2.0-32-generic x86_64
  UpgradeStatus: Upgraded to wily on 2016-02-18 (22 days ago)
  UserGroups: adm audio cdrom dip lpadmin plugdev sambashare sudo wireshark
  _MarkForUpload: True
  dmi.bios.date: 12/04/2013
  dmi.bios.vendor: Insyde
  dmi.bios.version: F.42
  dmi.board.asset.tag: Type2 - Board Asset Tag
  dmi.board.name: 2186
  dmi.board.vendor: Hewlett-Packard
  dmi.board.version: 35.12
  dmi.chassis.type: 10
  dmi.chassis.vendor: Hewlett-Packard
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnInsyde:bvrF.42:bd12/04/2013:svnHewlett-Packard:pnHPPavilion15NotebookPC:pvr098B1140410620180:rvnHewlett-Packard:rn2186:rvr35.12:cvnHewlett-Packard:ct10:cvrChassisVersion:
  dmi.product.name: HP Pavilion 15 Notebook PC
  dmi.product.version: 098B1140410620180
  dmi.sys.vendor: Hewlett-Packard

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1556471/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557508] fozzie (amd64) - tests ran: 182, failed: 0

[Brad Figg]

tests ran: 182, failed: 0;
  
http://kernel.ubuntu.com/testing/4.4.0-14.30/fozzie__4.4.0-14.30__2016-03-16_05-18-00/results-index.html

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557508

Title:
  linux: 4.4.0-14.30 -proposed tracker

Status in Kernel Development Workflow:
  In Progress
Status in Kernel Development Workflow automated-testing series:
  Incomplete
Status in Kernel Development Workflow prepare-package series:
  Fix Released
Status in Kernel Development Workflow prepare-package-meta series:
  Fix Released
Status in Kernel Development Workflow prepare-package-signed series:
  Fix Released
Status in Kernel Development Workflow promote-to-proposed series:
  Fix Released
Status in Kernel Development Workflow promote-to-release series:
  New
Status in Kernel Development Workflow regression-testing series:
  New
Status in linux package in Ubuntu:
  New
Status in linux source package in Xenial:
  New

Bug description:
  This bug is for tracking the 4.4.0-14.30 upload package. This bug will
  contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-Prepare-package-start:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase-changed:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase:Prepare
  kernel-stable-Promote-to-proposed-end:Tuesday, 15. March 2016 13:00 UTC
  proposed-announcement-sent:True

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-development-workflow/+bug/1557508/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1550050] Re: repeating phantom key when bt disconnects

[Daniel van Vugt]

** Branch unlinked: lp:mir

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1550050

Title:
  repeating phantom key when bt disconnects

Status in Canonical System Image:
  Fix Committed
Status in Canonical Pocket Desktop:
  Fix Committed
Status in Mir:
  Fix Committed
Status in Mir 0.20 series:
  Fix Released
Status in bluez package in Ubuntu:
  Invalid
Status in mir package in Ubuntu:
  Fix Released

Bug description:
  Every now and then when having bt mouse/keyboard connected - you will
  see when selecting a text box there is a repeating character (there is
  no specific character, but always repeats)

  It seems to be related somehow to bt devices disconnecting
  the only cure is a reboot

  This was reproduced by turning off the keyboard while holding down a
  key. We suspect the key up event is never delivered. This mimics the
  case where the BT connection drops off momentarily or perhaps an event
  is missed over the BT connection.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1550050/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557508] dagmar (amd64) - tests ran: 182, failed: 0

[Brad Figg]

tests ran: 182, failed: 0;
  
http://kernel.ubuntu.com/testing/4.4.0-14.30/dagmar__4.4.0-14.30__2016-03-16_05-18-00/results-index.html

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557508

Title:
  linux: 4.4.0-14.30 -proposed tracker

Status in Kernel Development Workflow:
  In Progress
Status in Kernel Development Workflow automated-testing series:
  Incomplete
Status in Kernel Development Workflow prepare-package series:
  Fix Released
Status in Kernel Development Workflow prepare-package-meta series:
  Fix Released
Status in Kernel Development Workflow prepare-package-signed series:
  Fix Released
Status in Kernel Development Workflow promote-to-proposed series:
  Fix Released
Status in Kernel Development Workflow promote-to-release series:
  New
Status in Kernel Development Workflow regression-testing series:
  New
Status in linux package in Ubuntu:
  New
Status in linux source package in Xenial:
  New

Bug description:
  This bug is for tracking the 4.4.0-14.30 upload package. This bug will
  contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-Prepare-package-start:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase-changed:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase:Prepare
  kernel-stable-Promote-to-proposed-end:Tuesday, 15. March 2016 13:00 UTC
  proposed-announcement-sent:True

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-development-workflow/+bug/1557508/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1550050] Re: repeating phantom key when bt disconnects

[Daniel van Vugt]

** Changed in: mir
   Status: In Progress => Fix Committed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1550050

Title:
  repeating phantom key when bt disconnects

Status in Canonical System Image:
  Fix Committed
Status in Canonical Pocket Desktop:
  Fix Committed
Status in Mir:
  Fix Committed
Status in Mir 0.20 series:
  Fix Released
Status in bluez package in Ubuntu:
  Invalid
Status in mir package in Ubuntu:
  Fix Released

Bug description:
  Every now and then when having bt mouse/keyboard connected - you will
  see when selecting a text box there is a repeating character (there is
  no specific character, but always repeats)

  It seems to be related somehow to bt devices disconnecting
  the only cure is a reboot

  This was reproduced by turning off the keyboard while holding down a
  key. We suspect the key up event is never delivered. This mimics the
  case where the BT connection drops off momentarily or perhaps an event
  is missed over the BT connection.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1550050/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1550050] Re: repeating phantom key when bt disconnects

[Launchpad Bug Tracker]

** Branch linked: lp:mir

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1550050

Title:
  repeating phantom key when bt disconnects

Status in Canonical System Image:
  Fix Committed
Status in Canonical Pocket Desktop:
  Fix Committed
Status in Mir:
  Fix Committed
Status in Mir 0.20 series:
  Fix Released
Status in bluez package in Ubuntu:
  Invalid
Status in mir package in Ubuntu:
  Fix Released

Bug description:
  Every now and then when having bt mouse/keyboard connected - you will
  see when selecting a text box there is a repeating character (there is
  no specific character, but always repeats)

  It seems to be related somehow to bt devices disconnecting
  the only cure is a reboot

  This was reproduced by turning off the keyboard while holding down a
  key. We suspect the key up event is never delivered. This mimics the
  case where the BT connection drops off momentarily or perhaps an event
  is missed over the BT connection.

To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1550050/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557508] dwalin (amd64) - tests ran: 66, failed: 1

[Brad Figg]

tests ran:  66, failed: 1;
  
http://kernel.ubuntu.com/testing/4.4.0-14.30/dwalin__4.4.0-14.30__2016-03-16_06-12-00/results-index.html

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557508

Title:
  linux: 4.4.0-14.30 -proposed tracker

Status in Kernel Development Workflow:
  In Progress
Status in Kernel Development Workflow automated-testing series:
  Incomplete
Status in Kernel Development Workflow prepare-package series:
  Fix Released
Status in Kernel Development Workflow prepare-package-meta series:
  Fix Released
Status in Kernel Development Workflow prepare-package-signed series:
  Fix Released
Status in Kernel Development Workflow promote-to-proposed series:
  Fix Released
Status in Kernel Development Workflow promote-to-release series:
  New
Status in Kernel Development Workflow regression-testing series:
  New
Status in linux package in Ubuntu:
  New
Status in linux source package in Xenial:
  New

Bug description:
  This bug is for tracking the 4.4.0-14.30 upload package. This bug will
  contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-Prepare-package-start:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase-changed:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase:Prepare
  kernel-stable-Promote-to-proposed-end:Tuesday, 15. March 2016 13:00 UTC
  proposed-announcement-sent:True

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-development-workflow/+bug/1557508/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557508] modoc (ppc64el) - tests ran: 22, failed: 4

[Brad Figg]

tests ran:  22, failed: 4;
  
http://kernel.ubuntu.com/testing/4.4.0-14.30/modoc__4.4.0-14.30__2016-03-16_05-33-00/results-index.html

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557508

Title:
  linux: 4.4.0-14.30 -proposed tracker

Status in Kernel Development Workflow:
  In Progress
Status in Kernel Development Workflow automated-testing series:
  Incomplete
Status in Kernel Development Workflow prepare-package series:
  Fix Released
Status in Kernel Development Workflow prepare-package-meta series:
  Fix Released
Status in Kernel Development Workflow prepare-package-signed series:
  Fix Released
Status in Kernel Development Workflow promote-to-proposed series:
  Fix Released
Status in Kernel Development Workflow promote-to-release series:
  New
Status in Kernel Development Workflow regression-testing series:
  New
Status in linux package in Ubuntu:
  New
Status in linux source package in Xenial:
  New

Bug description:
  This bug is for tracking the 4.4.0-14.30 upload package. This bug will
  contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-Prepare-package-start:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase-changed:Tuesday, 15. March 2016 12:39 UTC
  kernel-phase:Prepare
  kernel-stable-Promote-to-proposed-end:Tuesday, 15. March 2016 13:00 UTC
  proposed-announcement-sent:True

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-development-workflow/+bug/1557508/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557706] Re: linux: 4.2.0-35.40 -proposed tracker

[Brad Figg]

All builds are complete, packages in this bug can be copied to
-proposed.

Derivative packages from packages here can be worked on, the following tracking 
bugs were opened for them:
linux-raspi2 - bug 1557882

Backport packages from packages here can be worked on, the following tracking 
bugs were opened for them:
linux-lts-wily (14.04.1) - bug 1557884

** Changed in: kernel-sru-workflow/prepare-package
   Status: New => Fix Released

** Changed in: kernel-sru-workflow/prepare-package
 Assignee: Canonical Kernel Team (canonical-kernel-team) => Brad Figg 
(brad-figg)

** Changed in: kernel-sru-workflow/prepare-package-meta
   Status: New => Fix Released

** Changed in: kernel-sru-workflow/prepare-package-meta
 Assignee: Canonical Kernel Team (canonical-kernel-team) => Brad Figg 
(brad-figg)

** Changed in: kernel-sru-workflow/promote-to-proposed
   Status: New => Confirmed

** Description changed:

  This bug is for tracking the 4.2.0-35.40 upload package. This bug will
  contain status and testing results related to that upload.
  
  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-stable-Prepare-package-start:Tuesday, 15. March 2016 18:45 UTC
- kernel-stable-phase:Prepare
- kernel-stable-phase-changed:Tuesday, 15. March 2016 18:45 UTC
  kernel-stable-Promote-to-proposed-end:Tuesday, 15. March 2016 20:01 UTC
+ kernel-stable-phase:CopyToProposed
+ kernel-stable-Prepare-package-end:Wednesday, 16. March 2016 06:04 UTC
+ kernel-stable-Promote-to-proposed-start:Wednesday, 16. March 2016 06:04 UTC
+ kernel-stable-phase-changed:Wednesday, 16. March 2016 06:04 UTC

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1557706

Title:
  linux: 4.2.0-35.40 -proposed tracker

Status in Kernel SRU Workflow:
  In Progress
Status in Kernel SRU Workflow automated-testing series:
  New
Status in Kernel SRU Workflow certification-testing series:
  New
Status in Kernel SRU Workflow prepare-package series:
  Fix Released
Status in Kernel SRU Workflow prepare-package-meta series:
  Fix Released
Status in Kernel SRU Workflow prepare-package-signed series:
  Fix Released
Status in Kernel SRU Workflow promote-to-proposed series:
  Confirmed
Status in Kernel SRU Workflow promote-to-security series:
  New
Status in Kernel SRU Workflow promote-to-updates series:
  New
Status in Kernel SRU Workflow regression-testing series:
  New
Status in Kernel SRU Workflow security-signoff series:
  New
Status in Kernel SRU Workflow verification-testing series:
  New
Status in linux package in Ubuntu:
  Invalid
Status in linux source package in Wily:
  New

Bug description:
  This bug is for tracking the 4.2.0-35.40 upload package. This bug will
  contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-stable-Prepare-package-start:Tuesday, 15. March 2016 18:45 UTC
  kernel-stable-Promote-to-proposed-end:Tuesday, 15. March 2016 20:01 UTC
  kernel-stable-phase:CopyToProposed
  kernel-stable-Prepare-package-end:Wednesday, 16. March 2016 06:04 UTC
  kernel-stable-Promote-to-proposed-start:Wednesday, 16. March 2016 06:04 UTC
  kernel-stable-phase-changed:Wednesday, 16. March 2016 06:04 UTC

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-sru-workflow/+bug/1557706/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1557870] Re: linux-lts-vivid: 3.19.0-57.63~14.04.1 -proposed tracker

[Brad Figg]

** Description changed:

  This bug is for tracking the 3.19.0-57.63~14.04.1 upload package. This
  bug will contain status and testing results related to that upload.
  
  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-stable-Prepare-package-start:Wednesday, 16. March 2016 05:01 UTC
  kernel-stable-phase:Prepare
  kernel-stable-phase-changed:Wednesday, 16. March 2016 05:01 UTC
  kernel-stable-master-bug:1557623
+ kernel-stable-Promote-to-proposed-end:Wednesday, 16. March 2016 06:04 UTC

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-vivid in Ubuntu.
https://bugs.launchpad.net/bugs/1557870

Title:
  linux-lts-vivid: 3.19.0-57.63~14.04.1 -proposed tracker

Status in Kernel SRU Workflow:
  In Progress
Status in Kernel SRU Workflow automated-testing series:
  New
Status in Kernel SRU Workflow certification-testing series:
  New
Status in Kernel SRU Workflow prepare-package series:
  New
Status in Kernel SRU Workflow prepare-package-meta series:
  New
Status in Kernel SRU Workflow prepare-package-signed series:
  New
Status in Kernel SRU Workflow promote-to-proposed series:
  New
Status in Kernel SRU Workflow promote-to-security series:
  New
Status in Kernel SRU Workflow promote-to-updates series:
  New
Status in Kernel SRU Workflow regression-testing series:
  New
Status in Kernel SRU Workflow security-signoff series:
  New
Status in Kernel SRU Workflow verification-testing series:
  New
Status in linux-lts-vivid package in Ubuntu:
  New
Status in linux-lts-vivid source package in Trusty:
  New

Bug description:
  This bug is for tracking the 3.19.0-57.63~14.04.1 upload package. This
  bug will contain status and testing results related to that upload.

  For an explanation of the tasks and the associated workflow see: 
https://wiki.ubuntu.com/Kernel/kernel-sru-workflow
  kernel-stable-Prepare-package-start:Wednesday, 16. March 2016 05:01 UTC
  kernel-stable-phase:Prepare
  kernel-stable-phase-changed:Wednesday, 16. March 2016 05:01 UTC
  kernel-stable-master-bug:1557623
  kernel-stable-Promote-to-proposed-end:Wednesday, 16. March 2016 06:04 UTC

To manage notifications about this bug go to:
https://bugs.launchpad.net/kernel-sru-workflow/+bug/1557870/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp