[Kernel-packages] [Bug 1845677] Re: volume control doesn't work (it's just on/off) on Lenovo ThinkPad X1 Carbon 7th gen
I tried updating libasound2(-data), pulseaudio and kernel to 5.3.0-46 (not oem!) in my Mint 19.3 Box (Bionic). Also removed manual changes like blacklist snd_hda_intel and snd_soc_skl and also removed the "ucm" added by the script i found on github (posted above) from /usr/share/alsa/ucm/sof-skl_hda_card. After that, I rebooted and sound and mic came up grad - except bass speaker whereas the sound is 1. mostly treble and 2. sound in general was quieter as before. My BIOS starts with N2H, so i checked the new ucm conf and tried to play around with the bass settings there and diff'ed with my HiFi.conf i had before but no luck. No base. What i'am doing wrong? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1845677 Title: volume control doesn't work (it's just on/off) on Lenovo ThinkPad X1 Carbon 7th gen Status in linux package in Ubuntu: In Progress Status in linux-oem-osp1 package in Ubuntu: Invalid Status in linux source package in Bionic: Invalid Status in linux-oem-osp1 source package in Bionic: Fix Committed Status in linux source package in Eoan: In Progress Status in linux-oem-osp1 source package in Eoan: Invalid Status in linux source package in Focal: In Progress Status in linux-oem-osp1 source package in Focal: Invalid Bug description: [Impact] There are 2 physical speakers on the X1 7th, and one is Bass speaker and connect to a DAC which doesn't have volume control on it. [Fix] adjust that speaker to connect to a DAC which has volume control capability. [Test Case] adjust the output volume from UI and play sound from speaker. [Regression Risk] Low, these change is specific to 2 lenovo machines. On my Lenovo ThinkPad X1 Carbon 7th generation using the built-in speakers, the volume is either off or on, there's no gradation in volume when I move the slider up or down. If I enable Over-Amplification than there's gradation in volume when I turn the volume up past 100%, but not for 0-100%. This problem does not occur with a headset plugged into the 3.5mm jack. ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: linux-image-5.3.0-12-generic 5.3.0-12.13 ProcVersionSignature: Ubuntu 5.3.0-12.13-generic 5.3.0 Uname: Linux 5.3.0-12-generic x86_64 ApportVersion: 2.20.11-0ubuntu7 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jik3746 F pulseaudio /dev/snd/pcmC0D0p: jik3746 F...m pulseaudio CurrentDesktop: ubuntu:GNOME Date: Fri Sep 27 11:07:44 2019 InstallationDate: Installed on 2019-09-12 (14 days ago) InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Release amd64 (20190416) MachineType: LENOVO 20QD001VUS ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.3.0-12-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.3.0-12-generic N/A linux-backports-modules-5.3.0-12-generic N/A linux-firmware1.182 SourcePackage: linux UpgradeStatus: Upgraded to eoan on 2019-09-20 (7 days ago) dmi.bios.date: 07/04/2019 dmi.bios.vendor: LENOVO dmi.bios.version: N2HET30W (1.13 ) dmi.board.asset.tag: Not Available dmi.board.name: 20QD001VUS dmi.board.vendor: LENOVO dmi.board.version: SDK0J40697 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrN2HET30W(1.13):bd07/04/2019:svnLENOVO:pn20QD001VUS:pvrThinkPadX1Carbon7th:rvnLENOVO:rn20QD001VUS:rvrSDK0J40697WIN:cvnLENOVO:ct10:cvrNone: dmi.product.family: ThinkPad X1 Carbon 7th dmi.product.name: 20QD001VUS dmi.product.sku: LENOVO_MT_20QD_BU_Think_FM_ThinkPad X1 Carbon 7th dmi.product.version: ThinkPad X1 Carbon 7th dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1845677/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866772] Re: Sys oopsed with sysfs test in ubuntu_stress_smoke_test on X-hwe ARM64
Hello Colin, I can see this issue with 5.0 kernel (5.0.0-47.51~18.04.1) as well, with the same node hotdog-kernel. Do you think if we should fix this in 5.0 as well? Thanks sysfs FAILED (kernel oopsed) [ 1108.615397] Unable to handle kernel paging request at virtual address 46afa6a6 [ 1108.617127] Unable to handle kernel paging request at virtual address 46afd2d7 [ 1108.623317] Mem abort info: [ 1108.627466] Unable to handle kernel paging request at virtual address 46ad [ 1108.627469] Mem abort info: [ 1108.627470] ESR = 0x9621 [ 1108.627473] Exception class = DABT (current EL), IL = 32 bits [ 1108.627477] SET = 0, FnV = 0 [ 1108.627480] EA = 0, S1PTW = 0 [ 1108.627482] Data abort info: [ 1108.627485] ISV = 0, ISS = 0x0021 [ 1108.627487] CM = 0, WnR = 0 [ 1108.627490] swapper pgtable: 4k pages, 48-bit VAs, pgdp=815ac000 [ 1108.627495] [46ad] pgd=00bffcfff003, pud=009f28e05003, pmd=009de53f9003, pte=00688028f703 [ 1108.627507] Internal error: Oops: 9621 [#1] SMP [ 1108.627515] Modules linked in: unix_diag binfmt_misc snd_seq snd_seq_device snd_timer snd soundcore userio cuse hci_vhci bluetooth ecdh_generic vfio_iommu_type1 vfio uhid vhost_vsock vmw_vsock_virtio_transport_common vsock vhost_net vhost tap dccp_ipv4 dccp atm algif_rng aegis128 aegis128l aegis256 morus1280 morus640 algif_aead anubis fcrypt khazad seed sm4_generic tea crc32_generic md4 michael_mic nhpoly1305_neon nhpoly1305 poly1305_generic rmd128 rmd160 rmd256 rmd320 sha3_generic sm3_generic streebog_generic tgr192 wp512 algif_hash blowfish_generic blowfish_common cast5_generic des_generic salsa20_generic chacha_neon chacha_generic camellia_generic cast6_generic cast_common serpent_generic twofish_generic twofish_common algif_skcipher af_alg nls_iso8859_1 ipmi_ssif joydev input_leds ipmi_devintf ipmi_msghandler thunderx2_pmu sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 [ 1108.627576] async_raid6_recov async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0 multipath linear i2c_smbus aes_ce_blk aes_ce_cipher uas ast i2c_algo_bit ttm drm_kms_helper syscopyarea crct10dif_ce usb_storage ghash_ce sysfillrect qede sha2_ce sysimgblt mpt3sas fb_sys_fops qed sha256_arm64 sha1_ce raid_class drm scsi_transport_sas ahci crc8 gpio_xlp i2c_xlp9xx hid_generic usbhid hid aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64 [ 1108.627607] Process stress-ng-sysfs (pid: 203940, stack limit = 0x47d7ff87) [ 1108.627612] CPU: 93 PID: 203940 Comm: stress-ng-sysfs Not tainted 5.0.0-47-generic #51~18.04.1-Ubuntu [ 1108.627614] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL027 07/01/2019 [ 1108.627616] pstate: 8049 (Nzcv daif +PAN -UAO) [ 1108.627623] pc : __memcpy+0x9c/0x180 [ 1108.627629] lr : memory_read_from_buffer+0x64/0x88 [ 1108.627630] sp : 59933c90 [ 1108.627631] x29: 59933c90 x28: 809e4d35ac40 [ 1108.627634] x27: x26: [ 1108.627636] x25: 5600 x24: 46af [ 1108.627637] x23: 809ee6fad000 x22: 0003 [ 1108.627639] x21: 59933d08 x20: 0003 [ 1108.627640] x19: 0001 x18: [ 1108.627641] x17: x16: [ 1108.627643] x15: x14: [ 1108.627644] x13: x12: [ 1108.627645] x11: x10: [ 1108.627647] x9 : x8 : [ 1108.627648] x7 : 106cd1d8 x6 : 809ee6fad000 [ 1108.627650] x5 : 0003 x4 : 0001 [ 1108.627651] x3 : 46af x2 : 0003 [ 1108.627653] x1 : 46ad x0 : 809ee6fad000 [ 1108.627655] Call trace: [ 1108.627657] __memcpy+0x9c/0x180 [ 1108.627661] acpi_data_show+0x54/0x80 [ 1108.627664] sysfs_kf_bin_read+0x6c/0xa8 [ 1108.627669] kernfs_fop_read+0xa8/0x228 [ 1108.627674] __vfs_read+0x48/0x80 [ 1108.627676] vfs_read+0x94/0x150 [ 1108.627678] ksys_read+0x74/0xf0 [ 1108.627680] __arm64_sys_read+0x24/0x30 [ 1108.627686] el0_svc_common+0x88/0x180 [ 1108.627688] el0_svc_handler+0x38/0x78 [ 1108.627692] el0_svc+0x8/0xc [ 1108.627695] Code: 36100062 b8404423 b80044c3 36080062 (78402423) [ 1108.627698] ---[ end trace 3ac0a382f7e22655 ]--- [ 1108.631236] Mem abort info: [ 1108.634018] ESR = 0x9621 [ 1108.634020] Exception class = DABT (current EL), IL = 32 bits [ 1108.634021] SET = 0, FnV = 0 [ 1108.634025] EA = 0, S1PTW = 0 [ 1108.641929] ESR = 0x9621 [ 1108.641930] Exception class = DABT (current EL), IL = 32 bits [ 1108.641931] SET = 0, FnV = 0 [ 1108.641934] EA = 0, S1PTW = 0 [ 1108.644717] Data abort info: [
[Kernel-packages] [Bug 1366418] Re: Bluetooth BCM43142A0 doesn’t work
** No longer affects: bluez (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1366418 Title: Bluetooth BCM43142A0 doesn’t work Status in linux package in Ubuntu: Fix Committed Status in linux-firmware package in Ubuntu: Confirmed Bug description: I’ve installed ubuntu 14.04 and my computer’s builtin bluetooth (computer is an Asus x550ln) doesn’t work at all. Bluetooth is not displayed in the menu bar, if I open the bluetooth UI and switch on, nothing happens and the result of “hcitool dev” is empty. I have tried to install the windows driver with ndiswrapper, and the bluetooth device seems to be detected as an usb bluetooth device but still not working. I then add the device to the bluetooth usb device and was able to activate bluetooth in the UI but it does not detect any other devices (I’ve tested with a smartphone). The driver I have installed can be found in asus page => http://www.asus.com/fr/Notebooks_Ultrabooks/X550LN/HelpDesk_Download/ Select Windows OS, then “bluetooth” section, take the Broadcom driver (should be the first one). If you extract this archive, you will find a file named “bcbtums- win8x64-brcm.inf” which I installed using the following command: ndiswrapper -i bcbtums-win8x64-brcm.inf Then, the result of “ndiswrapper -l” is: bcbtums-win8x64-brcm : driver installed device (04CA:2006) present in usb-devices, I find a device which was not present before installation (I might have activated btusb before on this paste): T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=2006 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM43142A0 S: SerialNumber=B8EE6593D989 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) then, “echo "04ca 2006" > /sys/bus/usb/drivers/btusb/new_id”, and I can switch usb on, but no device will be detected and I’ve found this in the dmesg: [2200.843126] Bluetooth: hci0 command 0x1003 tx timeout which looks pretty much like a “bluetooth not working” message which I don’t understand in details. I leave here my full dmesg: [0.253889] NetLabel: domain hash size = 128 [0.253890] NetLabel: protocols = UNLABELED CIPSOv4 [0.253901] NetLabel: unlabeled traffic allowed by default [0.253959] hpet0: at MMIO 0xfed0, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [0.253965] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [0.255995] Switched to clocksource hpet [0.260468] AppArmor: AppArmor Filesystem Enabled [0.260488] pnp: PnP ACPI init [0.260500] ACPI: bus type PNP registered [0.260592] system 00:00: [mem 0xfed4-0xfed44fff] has been reserved [0.260596] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [0.260642] pnp 00:01: [dma 4] [0.260658] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [0.260678] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [0.260782] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [0.260924] system 00:04: [io 0x0680-0x069f] has been reserved [0.260927] system 00:04: [io 0x] has been reserved [0.260928] system 00:04: [io 0x] has been reserved [0.260930] system 00:04: [io 0x] has been reserved [0.260932] system 00:04: [io 0x1c00-0x1cfe] has been reserved [0.260934] system 00:04: [io 0x1d00-0x1dfe] has been reserved [0.260935] system 00:04: [io 0x1e00-0x1efe] has been reserved [0.260937] system 00:04: [io 0x1f00-0x1ffe] has been reserved [0.260939] system 00:04: [io 0x1800-0x18fe] could not be reserved [0.260941] system 00:04: [io 0x164e-0x164f] has been reserved [0.260943] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [0.260969] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [0.261012] system 00:06: [io 0x1854-0x1857] has been reserved [0.261014] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [0.261059] system 00:07: [io 0x04d0-0x04d1] has been reserved [0.261061] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [0.261089] system 00:08: [io 0x0240-0x0259] has been reserved [0.261091] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [0.261144] pnp 00:09: Plug and Play ACPI device, IDs FLT0101 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active) [0.261179] pnp 00:0a: Plug and Play ACPI device, IDs ATK3001 PNP030b (active) [
[Kernel-packages] [Bug 1875113] Re: Opengl no detected
Hmm, Nvidia recommends driver version 390 for your GeForce GT 635M and that's what you have... ** Package changed: xorg (Ubuntu) => xorg-server (Ubuntu) ** Tags added: nvidia ** Also affects: nvidia-graphics-drivers-390 (Ubuntu) Importance: Undecided Status: New ** Summary changed: - Opengl no detected + OpenGL not detected (Intel Ivy Bridge + Nvidia GeForce GT 635M) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-graphics-drivers-390 in Ubuntu. https://bugs.launchpad.net/bugs/1875113 Title: OpenGL not detected (Intel Ivy Bridge + Nvidia GeForce GT 635M) Status in nvidia-graphics-drivers-390 package in Ubuntu: New Status in xorg-server package in Ubuntu: New Bug description: The screen presents screen tearing in the browser, on the desktop as well and when installing Steam it says that it does not detect Opengl or any video card ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.gpus..01.00.0: Error: [Errno 21] Es un directorio: '/proc/driver/nvidia/gpus/:01:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 390.132 Fri Nov 1 00:40:14 PDT 2019 GCC version: ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 BootLog: Error: [Errno 13] Permiso denegado: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sat Apr 25 20:01:32 2020 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. 3rd Gen Core processor Graphics Controller [1043:100d] NVIDIA Corporation GF108M [GeForce GT 635M] [10de:0de3] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. GF108M [GeForce GT 635M] [1043:100d] InstallationDate: Installed on 2020-04-24 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: ASUSTeK COMPUTER INC. K46CM ProcEnviron: LANGUAGE=es_CO:es PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=es_CO.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=2d00d17e-c566-412e-bdfd-529af92571e2 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/17/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: K46CM.317 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: K46CM dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrK46CM.317:bd05/17/2013:svnASUSTeKCOMPUTERINC.:pnK46CM:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnK46CM:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.family: K dmi.product.name: K46CM dmi.product.sku: ASUS-NotebookSKU dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. nvidia-settings: ERROR: Unable to load info from any available system ERROR: Unable to load info from any available system version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.101-2 version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.4-2ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.8-2ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-390/+bug/1875113/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1861344] Re: uvcvideo: IPEVO Ziggi-HD document camera stops working on kernel 4.4.0-171
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1861344 Title: uvcvideo: IPEVO Ziggi-HD document camera stops working on kernel 4.4.0-171 Status in linux package in Ubuntu: Expired Bug description: I have a IPEVO Ziggi-HD document camera (1778:0207) that refuses to operate on kernel 4.4.0-171 or newer. On such kernels, uvcvideo fails with the kernel message 'uvcvideo: No streaming interface found for terminal 2' and no `/dev/videoX` device is created. The camera operates correctly on kernel 4.4.0-170. Ubuntu release: 16.04.6 LTS Attached in a tarball: * a relevant /var/log/syslog fragment captured when device plugged in * `cat /proc/version_signature` * `sudo lspci -vnvn` To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1861344/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1870538] Re: ryzen 5 3600x hard lockup
** Attachment added: "journal_log_28042020_5.7.txt" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1870538/+attachment/5362190/+files/journal_log_28042020_5.7.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1870538 Title: ryzen 5 3600x hard lockup Status in linux package in Ubuntu: Confirmed Bug description: System randomly freezes and requires a hard reset. Very frequently it happens when trying to wake it up from a period of inactivity. (after the screen has turned off). Almost daily occurrence. Description: Ubuntu 19.10 Release: 19.10 Codename: eoan Linux MartoBeast 5.3.0-45-generic #37-Ubuntu SMP Thu Mar 26 20:41:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: linux-image-5.3.0-45-generic 5.3.0-45.37 ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 Uname: Linux 5.3.0-45-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: martin 2642 F pulseaudio /dev/snd/controlC0: martin 2642 F pulseaudio /dev/snd/controlC2: martin 2642 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Fri Apr 3 08:46:11 2020 InstallationDate: Installed on 2019-12-08 (117 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) IwConfig: lono wireless extensions. enp4s0no wireless extensions. MachineType: Gigabyte Technology Co., Ltd. X570 AORUS ELITE ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=05d2cb45-6b9c-47b3-8102-e6c6a13de26b ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.3.0-45-generic N/A linux-backports-modules-5.3.0-45-generic N/A linux-firmware1.183.4 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/06/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F11 dmi.board.asset.tag: Default string dmi.board.name: X570 AORUS ELITE dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF11:bd12/06/2019:svnGigabyteTechnologyCo.,Ltd.:pnX570AORUSELITE:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570AORUSELITE:rvrx.x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: Default string dmi.product.name: X570 AORUS ELITE dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1870538/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1874685] Re: Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201NGW), REV=0x354 [8086:a0f0] subsystem id [1a56:1651] wireless adapter not found due to firmware crash
https://lists.ubuntu.com/archives/kernel-team/2020-April/109411.html SRU for OEM-OSP1-B/E/F/OEM-5.6/G/U ** Also affects: linux (Ubuntu Groovy) Importance: Undecided Assignee: You-Sheng Yang (vicamo) Status: Incomplete ** Also affects: linux-oem-osp1 (Ubuntu Groovy) Importance: Undecided Status: New ** Changed in: linux (Ubuntu Groovy) Status: Incomplete => In Progress ** Changed in: linux (Ubuntu Bionic) Status: New => Invalid ** Also affects: linux-oem-5.6 (Ubuntu) Importance: Undecided Status: New ** Changed in: linux-oem-5.6 (Ubuntu Groovy) Status: New => Invalid ** Changed in: linux-oem-5.6 (Ubuntu Bionic) Status: New => Invalid ** Changed in: linux-oem-5.6 (Ubuntu Eoan) Status: New => Invalid ** Changed in: linux-oem-5.6 (Ubuntu Focal) Status: New => In Progress ** Changed in: linux-oem-5.6 (Ubuntu Focal) Assignee: (unassigned) => You-Sheng Yang (vicamo) ** Changed in: linux-oem-osp1 (Ubuntu Bionic) Status: New => In Progress ** Changed in: linux-oem-osp1 (Ubuntu Bionic) Assignee: (unassigned) => You-Sheng Yang (vicamo) ** Changed in: linux-oem-osp1 (Ubuntu Eoan) Status: New => Invalid ** Changed in: linux-oem-osp1 (Ubuntu Focal) Status: New => Invalid ** Changed in: linux-oem-osp1 (Ubuntu Groovy) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1874685 Title: Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201NGW), REV=0x354 [8086:a0f0] subsystem id [1a56:1651] wireless adapter not found due to firmware crash Status in HWE Next: New Status in linux package in Ubuntu: In Progress Status in linux-oem-5.6 package in Ubuntu: Invalid Status in linux-oem-osp1 package in Ubuntu: Invalid Status in linux source package in Bionic: Invalid Status in linux-oem-5.6 source package in Bionic: Invalid Status in linux-oem-osp1 source package in Bionic: In Progress Status in linux source package in Eoan: New Status in linux-oem-5.6 source package in Eoan: Invalid Status in linux-oem-osp1 source package in Eoan: Invalid Status in linux source package in Focal: New Status in linux-oem-5.6 source package in Focal: In Progress Status in linux-oem-osp1 source package in Focal: Invalid Status in linux source package in Groovy: In Progress Status in linux-oem-5.6 source package in Groovy: Invalid Status in linux-oem-osp1 source package in Groovy: Invalid Bug description: [9.924130] iwlwifi :00:14.3: enabling device ( -> 0002) [ 10.031456] iwlwifi :00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 58.3.35.22 [ 10.031480] iwlwifi :00:14.3: Found debug destination: EXTERNAL_DRAM [ 10.031489] iwlwifi :00:14.3: Found debug configuration: 0 [ 10.033948] iwlwifi :00:14.3: loaded firmware version 50.3e391d3e.0 op_mode iwlmvm [ 10.218293] iwlwifi :00:14.3: Detected Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201NGW), REV=0x354 [ 10.232843] iwlwifi :00:14.3: Applying debug destination EXTERNAL_DRAM [ 10.235398] iwlwifi :00:14.3: Allocated 0x0040 bytes for firmware monitor. [ 11.241180] iwlwifi :00:14.3: Collecting data: trigger 15 fired. [ 11.489274] iwlwifi :00:14.3: Start IWL Error Log Dump: [ 11.489293] iwlwifi :00:14.3: Status: 0x, count: -673266569 [ 11.489303] iwlwifi :00:14.3: Loaded firmware version: 50.3e391d3e.0 [ 11.489315] iwlwifi :00:14.3: 0x90F1F96A | ADVANCED_SYSASSERT [ 11.489323] iwlwifi :00:14.3: 0x7A7986FC | trm_hw_status0 [ 11.489331] iwlwifi :00:14.3: 0x09E990EC | trm_hw_status1 [ 11.489338] iwlwifi :00:14.3: 0x3073F272 | branchlink2 [ 11.489345] iwlwifi :00:14.3: 0xD569005D | interruptlink1 [ 11.489352] iwlwifi :00:14.3: 0xFEA17D01 | interruptlink2 [ 11.489359] iwlwifi :00:14.3: 0x4BBD0C7B | data1 [ 11.489367] iwlwifi :00:14.3: 0xB33DAF15 | data2 [ 11.489375] iwlwifi :00:14.3: 0xC8E4188F | data3 [ 11.489382] iwlwifi :00:14.3: 0xDEC3F4B3 | beacon time [ 11.489389] iwlwifi :00:14.3: 0xD5B7AAC7 | tsf low [ 11.489395] iwlwifi :00:14.3: 0x00073EAF | tsf hi [ 11.489402] iwlwifi :00:14.3: 0xB943A8DA | time gp1 [ 11.489409] iwlwifi :00:14.3: 0x6CCF8627 | time gp2 [ 11.489417] iwlwifi :00:14.3: 0x7944BDC6 | uCode revision type [ 11.489424] iwlwifi :00:14.3: 0x3C9DCF39 | uCode version major [ 11.489431] iwlwifi :00:14.3: 0xAF537547 | uCode version minor [ 11.489439] iwlwifi :00:14.3: 0xBC11442E | hw version [ 11.489447] iwlwifi :00:14.3: 0x160C9445 | board version [ 11.489453] iwlwifi :00:14.3: 0x276F21F6 | hcmd [ 11.489460] iwlwifi :00:14.3: 0x022688AB | isr0 [ 11.489466] iwlwifi :00:14.3: 0xEBF64685 | isr1
[Kernel-packages] [Bug 1870538] Re: ryzen 5 3600x hard lockup
Spoke too soon. Here are 2 crashes ** Attachment added: "journal_log_27042020_5.7.txt" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1870538/+attachment/5362189/+files/journal_log_27042020_5.7.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1870538 Title: ryzen 5 3600x hard lockup Status in linux package in Ubuntu: Confirmed Bug description: System randomly freezes and requires a hard reset. Very frequently it happens when trying to wake it up from a period of inactivity. (after the screen has turned off). Almost daily occurrence. Description: Ubuntu 19.10 Release: 19.10 Codename: eoan Linux MartoBeast 5.3.0-45-generic #37-Ubuntu SMP Thu Mar 26 20:41:27 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: linux-image-5.3.0-45-generic 5.3.0-45.37 ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 Uname: Linux 5.3.0-45-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: martin 2642 F pulseaudio /dev/snd/controlC0: martin 2642 F pulseaudio /dev/snd/controlC2: martin 2642 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Fri Apr 3 08:46:11 2020 InstallationDate: Installed on 2019-12-08 (117 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) IwConfig: lono wireless extensions. enp4s0no wireless extensions. MachineType: Gigabyte Technology Co., Ltd. X570 AORUS ELITE ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=05d2cb45-6b9c-47b3-8102-e6c6a13de26b ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.3.0-45-generic N/A linux-backports-modules-5.3.0-45-generic N/A linux-firmware1.183.4 RfKill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/06/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F11 dmi.board.asset.tag: Default string dmi.board.name: X570 AORUS ELITE dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF11:bd12/06/2019:svnGigabyteTechnologyCo.,Ltd.:pnX570AORUSELITE:pvr-CF:rvnGigabyteTechnologyCo.,Ltd.:rnX570AORUSELITE:rvrx.x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: Default string dmi.product.name: X570 AORUS ELITE dmi.product.sku: Default string dmi.product.version: -CF dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1870538/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1788321] Re: swapon failed: invalid argument
Fixed my problem. While looking through /var/log/syslog, I noticed this line around the same time swap mount failed. BTRFS warning (device sda3): swapfile must not be copy-on-write Then a few lines later... systemd[1]: swap.img.swap: Failed with result 'exit-code'. systemd[1]: Failed to activate swap /swap.img. systemd[1]: Dependency failed for Swap. systemd[1]: swap.target: Job swap.target/start failed with result 'dependency'. Yes my root is on btrfs and I did not see this error before. So I deleted /swap.img and started over. $ sudo rm -rf /swap.img $ sudo touch /swap.img $ sudo chattr +C /swap.img $ sudo fallocate -l 2G /swap.img $ sudo chmod 600 /swap.img $ sudo mkswap /swap.img $ sudo swapon /swap.img No error and "swapon --show" gives this: NAME TYPE SIZE USED PRIO /swap.img file 2G 0B -2 Just what I was expecting. So problem solved for me, maybe a check can be put in to see if it's on btrfs and apply the 'chattr +C' option. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1788321 Title: swapon failed: invalid argument Status in linux package in Ubuntu: Confirmed Status in util-linux package in Ubuntu: Invalid Bug description: Environment: - Ubuntu 18.04.1 LTS - Linux 4.15.0-32-generic i686 Description: When I try to mount my swap partition or my swap file, I get "swapon failed: invalid argument" . Steps to reproduce: 1) sudo bash 2) dd if=/dev/zero of=/swapfile bs=1024 count=524288 3) mkswap /swapfile 4) chown root:root /swapfile 5) chmod 0600 /swapfile 6) swapon /swapfile Last execution returns "swapon failed: invalid argument" . I'm almost sure it's a bug because I have no problems using Linux 4.15.0-29-generic instead of Linux 4.15.0-32-generic. Also, no problems using Ubuntu 18.04.1 LTS Live CD. Regards. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1788321/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875437] Re: WIFI stops working and system breaks
** Tags added: hwe-networking-wifi ** Summary changed: - WIFI stops working and system breaks + Qualcomm Atheros QCA6174 [168c:003e] subsystem [1a56:1535] WIFI stops working and system breaks -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875437 Title: Qualcomm Atheros QCA6174 [168c:003e] subsystem [1a56:1535] WIFI stops working and system breaks Status in linux package in Ubuntu: Confirmed Bug description: I have a dell XPS 15 9570 laptop. I have been using Ubuntu (18, 19 and 20) for the last two years. Everything work fine except for the wifi, which randomly stops working. Sometimes I can just turn off and on the wifi and it comes to work until next random crash. However, other times, when it happens, I cannot turn off wifi, it seems like the system breaks, I have to hard shutdown the laptop and after boot it works again. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: pedrolarben 1800 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Mon Apr 27 18:19:56 2020 InstallationDate: Installed on 2020-04-25 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: Dell Inc. XPS 15 9570 ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.4.0-26-generic root=UUID=1a07689c-3362-41b2-b2e1-ae28e49f5384 ro quiet splash acpi_rev_override=1 acpi_osi=Linux nouveau.modeset=0 pcie_aspm=force drm.vblankoffdelay=1 scsi_mod.use_blk_mq=1 nouveau.runpm=0 mem_sleep_default=deep mitigations=off vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/25/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.15.0 dmi.board.name: 0D0T05 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.15.0:bd12/25/2019:svnDellInc.:pnXPS159570:pvr:rvnDellInc.:rn0D0T05:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: XPS dmi.product.name: XPS 15 9570 dmi.product.sku: 087C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875437/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1848417] Re: btrfs/172 from ubuntu_xfstests_btrfs failed on B/D
** Tags added: sru-20200406 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1848417 Title: btrfs/172 from ubuntu_xfstests_btrfs failed on B/D Status in ubuntu-kernel-tests: New Status in linux package in Ubuntu: Confirmed Status in linux source package in Bionic: New Status in linux source package in Disco: Confirmed Bug description: Issue found on node amd64 node "kili" btrfs/172 - output mismatch (see /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/172.out.bad) --- tests/btrfs/172.out2019-10-16 10:51:13.104701643 + +++ /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/172.out.bad 2019-10-16 11:12:14.297724635 + @@ -1,2 +1,5 @@ QA output created by 172 +fallocate: No space left on device +fallocate: No space left on device +fallocate: No space left on device Silence is golden ... (Run 'diff -u /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/tests/btrfs/172.out /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/172.out.bad' to see the entire diff) $ diff -u /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/tests/btrfs/172.out /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/172.out.bad --- /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/tests/btrfs/172.out 2019-10-16 10:51:13.104701643 + +++ /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/172.out.bad 2019-10-16 11:12:14.297724635 + @@ -1,2 +1,5 @@ QA output created by 172 +fallocate: No space left on device +fallocate: No space left on device +fallocate: No space left on device Silence is golden Syslog: Oct 16 11:12:12 kili ubuntu: run xfstest btrfs/172 Oct 16 11:12:12 kili kernel: [ 1871.836387] run fstests btrfs/172 at 2019-10-16 11:12:12 Oct 16 11:12:12 kili kernel: [ 1872.017295] BTRFS info (device sdb1): disk space caching is enabled Oct 16 11:12:12 kili kernel: [ 1872.017299] BTRFS info (device sdb1): has skinny extents Oct 16 11:12:12 kili kernel: [ 1872.020831] BTRFS info (device sdb1): enabling ssd optimizations Oct 16 11:12:12 kili kernel: [ 1872.126224] BTRFS: device fsid 319cee42-25fa-4cac-8de6-5230ebedf99f devid 1 transid 5 /dev/sdb2 Oct 16 11:12:12 kili kernel: [ 1872.151545] BTRFS info (device sdb2): max_inline at 0 Oct 16 11:12:12 kili kernel: [ 1872.151550] BTRFS info (device sdb2): setting nodatacow, compression disabled Oct 16 11:12:12 kili kernel: [ 1872.151552] BTRFS info (device sdb2): disk space caching is enabled Oct 16 11:12:12 kili kernel: [ 1872.151553] BTRFS info (device sdb2): has skinny extents Oct 16 11:12:12 kili kernel: [ 1872.151555] BTRFS info (device sdb2): flagging fs with big metadata feature Oct 16 11:12:12 kili kernel: [ 1872.158799] BTRFS info (device sdb2): enabling ssd optimizations Oct 16 11:12:12 kili kernel: [ 1872.159342] BTRFS info (device sdb2): checking UUID tree Oct 16 11:12:14 kili systemd[1894]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dtest.mount: Succeeded. Oct 16 11:12:14 kili systemd[1]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dtest.mount: Succeeded. Oct 16 11:12:14 kili systemd[1]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dscratch.mount: Succeeded. Oct 16 11:12:14 kili systemd[1894]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dscratch.mount: Succeeded. Oct 16 11:12:14 kili kernel: [ 1873.906816] BTRFS info (device sdb2): disk space caching is enabled Oct 16 11:12:14 kili kernel: [ 1873.906819] BTRFS info (device sdb2): has skinny extents Oct 16 11:12:14 kili kernel: [ 1873.909937] BTRFS info (device sdb2): enabling ssd optimizations Oct 16 11:12:14 kili systemd[1894]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dscratch.mount: Succeeded. Oct 16 11:12:14 kili systemd[1]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dscratch.mount: Succeeded. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: linux-image-5.0.0-31-generic 5.0.0-31.33 ProcVersionSignature: User Name 5.0.0-31.33-generic 5.0.21 Uname: Linux 5.0.0-31-generic x86_64 AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Oct 16 10:41 seq crw-rw 1 root audio 116, 33 Oct 16 10:41 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay': 'aplay' ApportVersion: 2.20.10-0ubuntu27.1 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord': 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed
[Kernel-packages] [Bug 1848418] Re: btrfs/182 from ubuntu_xfstests_btrfs failed on B/D
** Tags added: sru-20200406 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1848418 Title: btrfs/182 from ubuntu_xfstests_btrfs failed on B/D Status in ubuntu-kernel-tests: New Status in linux package in Ubuntu: Confirmed Status in linux source package in Bionic: New Status in linux source package in Disco: Confirmed Bug description: Issue found on node amd64 node "kili" btrfs/182 - output mismatch (see /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/182.out.bad) --- tests/btrfs/182.out2019-10-16 10:51:13.104701643 + +++ /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/182.out.bad 2019-10-16 11:12:32.817591531 + @@ -1,2 +1,4 @@ QA output created by 182 +ERROR: error during balancing '/home/ubuntu/autotest/client/tmp/tmp/xfstests-scratch': No space left on device +There may be more info in syslog - try dmesg | tail Silence is golden ... (Run 'diff -u /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/tests/btrfs/182.out /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/182.out.bad' to see the entire diff) $ diff -u /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/tests/btrfs/182.out /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/182.out.bad --- /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/tests/btrfs/182.out 2019-10-16 10:51:13.104701643 + +++ /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/182.out.bad 2019-10-16 11:12:32.817591531 + @@ -1,2 +1,4 @@ QA output created by 182 +ERROR: error during balancing '/home/ubuntu/autotest/client/tmp/tmp/xfstests-scratch': No space left on device +There may be more info in syslog - try dmesg | tail Silence is golden Syslog: Oct 16 11:12:28 kili ubuntu: run xfstest btrfs/182 Oct 16 11:12:28 kili kernel: [ 1887.982615] run fstests btrfs/182 at 2019-10-16 11:12:28 Oct 16 11:12:28 kili kernel: [ 1888.168789] BTRFS info (device sdb1): disk space caching is enabled Oct 16 11:12:28 kili kernel: [ 1888.168791] BTRFS info (device sdb1): has skinny extents Oct 16 11:12:28 kili kernel: [ 1888.171922] BTRFS info (device sdb1): enabling ssd optimizations Oct 16 11:12:28 kili kernel: [ 1888.254332] BTRFS: device fsid 31ebd16f-0464-4373-b2d9-d3beef4d1bf4 devid 1 transid 5 /dev/sdb2 Oct 16 11:12:28 kili kernel: [ 1888.274317] BTRFS info (device sdb2): disk space caching is enabled Oct 16 11:12:28 kili kernel: [ 1888.274319] BTRFS info (device sdb2): has skinny extents Oct 16 11:12:28 kili kernel: [ 1888.274320] BTRFS info (device sdb2): flagging fs with big metadata feature Oct 16 11:12:28 kili kernel: [ 1888.282340] BTRFS info (device sdb2): enabling ssd optimizations Oct 16 11:12:28 kili kernel: [ 1888.286045] BTRFS info (device sdb2): checking UUID tree Oct 16 11:12:32 kili kernel: [ 1892.268108] BTRFS info (device sdb2): balance: start -m -s Oct 16 11:12:32 kili kernel: [ 1892.268284] BTRFS info (device sdb2): relocating block group 1048576 flags system Oct 16 11:12:32 kili kernel: [ 1892.272632] BTRFS info (device sdb2): found 1 extents Oct 16 11:12:32 kili kernel: [ 1892.275676] BTRFS info (device sdb2): 2 enospc errors during balance Oct 16 11:12:32 kili kernel: [ 1892.275678] BTRFS info (device sdb2): balance: ended with status: -28 Oct 16 11:12:32 kili systemd[1894]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dtest.mount: Succeeded. Oct 16 11:12:32 kili systemd[1]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dtest.mount: Succeeded. Oct 16 11:12:32 kili systemd[1]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dscratch.mount: Succeeded. Oct 16 11:12:32 kili systemd[1894]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dscratch.mount: Succeeded. Oct 16 11:12:32 kili kernel: [ 1892.433637] BTRFS info (device sdb2): disk space caching is enabled Oct 16 11:12:32 kili kernel: [ 1892.433639] BTRFS info (device sdb2): has skinny extents Oct 16 11:12:32 kili kernel: [ 1892.437048] BTRFS info (device sdb2): enabling ssd optimizations Oct 16 11:12:32 kili systemd[1894]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dscratch.mount: Succeeded. Oct 16 11:12:32 kili systemd[1]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dscratch.mount: Succeeded. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: linux-image-5.0.0-31-generic 5.0.0-31.33 ProcVersionSignature: User Name 5.0.0-31.33-generic 5.0.21 Uname: Linux 5.0.0-31-generic x86_64 AlsaDevices: total 0
[Kernel-packages] [Bug 1848421] Re: btrfs/187 from ubuntu_xfstests_btrfs failed on B/D
** Tags added: sru-20200406 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1848421 Title: btrfs/187 from ubuntu_xfstests_btrfs failed on B/D Status in ubuntu-kernel-tests: New Status in linux package in Ubuntu: Confirmed Status in linux source package in Bionic: New Status in linux source package in Disco: Confirmed Bug description: Issue found on node amd64 node "kili" btrfs/187 - output mismatch (see /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/187.out.bad) --- tests/btrfs/187.out2019-10-16 10:51:13.104701643 + +++ /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/187.out.bad 2019-10-16 11:16:39.519207382 + @@ -1,3 +1,6 @@ QA output created by 187 Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' +[ 2109.330631] BTRFS error (device sdb2): parent transid verify failed on 18814697472 wanted 396 found 415 +[ 2113.554514] BTRFS error (device sdb2): parent transid verify failed on 19921420288 wanted 423 found 445 +[ 2117.693224] BTRFS error (device sdb2): parent transid verify failed on 20514979840 wanted 446 found 458 ... (Run 'diff -u /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/tests/btrfs/187.out /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/187.out.bad' to see the entire diff) $ diff -u /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/tests/btrfs/187.out /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/187.out.bad --- /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/tests/btrfs/187.out 2019-10-16 10:51:13.104701643 + +++ /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/187.out.bad 2019-10-16 11:16:39.519207382 + @@ -1,3 +1,6 @@ QA output created by 187 Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1' Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2' +[ 2109.330631] BTRFS error (device sdb2): parent transid verify failed on 18814697472 wanted 396 found 415 +[ 2113.554514] BTRFS error (device sdb2): parent transid verify failed on 19921420288 wanted 423 found 445 +[ 2117.693224] BTRFS error (device sdb2): parent transid verify failed on 20514979840 wanted 446 found 458 Please find the attachment for the syslog. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: linux-image-5.0.0-31-generic 5.0.0-31.33 ProcVersionSignature: User Name 5.0.0-31.33-generic 5.0.21 Uname: Linux 5.0.0-31-generic x86_64 AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Oct 16 10:41 seq crw-rw 1 root audio 116, 33 Oct 16 10:41 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay': 'aplay' ApportVersion: 2.20.10-0ubuntu27.1 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord': 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: Date: Thu Oct 17 04:33:53 2019 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig': 'iwconfig' MachineType: Intel Corporation S2600WTT PciMultimedia: ProcFB: 0 mgadrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-31-generic root=UUID=72dbdd83-0e2a-4fdd-99ca-70869e30b925 ro RelatedPackageVersions: linux-restricted-modules-5.0.0-31-generic N/A linux-backports-modules-5.0.0-31-generic N/A linux-firmware1.178.3 RfKill: Error: [Errno 2] No such file or directory: 'rfkill': 'rfkill' SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/19/2015 dmi.bios.vendor: Intel Corporation dmi.bios.version: SE5C610.86B.01.01.1008.031920151331 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: S2600WTT dmi.board.vendor: Intel Corporation dmi.board.version: G92187-350 dmi.chassis.asset.tag: dmi.chassis.type: 23 dmi.chassis.vendor: ... dmi.chassis.version: .. dmi.modalias: dmi:bvnIntelCorporation:bvrSE5C610.86B.01.01.1008.031920151331:bd03/19/2015:svnIntelCorporation:pnS2600WTT:pvr:rvnIntelCorporation:rnS2600WTT:rvrG92187-350:cvn...:ct23:cvr..: dmi.product.family: Family dmi.product.name: S2600WTT dmi.product.sku: SKU Number dmi.product.version: dmi.sys.vendor: Intel
[Kernel-packages] [Bug 1848409] Re: btrfs/153 from ubuntu_xfstests_btrfs failed on D
** Tags added: sru-20200406 ** Summary changed: - btrfs/153 from ubuntu_xfstests_btrfs failed on D + btrfs/153 from ubuntu_xfstests_btrfs failed on 5.0 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1848409 Title: btrfs/153 from ubuntu_xfstests_btrfs failed on 5.0 Status in ubuntu-kernel-tests: New Status in linux package in Ubuntu: Incomplete Status in linux source package in Disco: Incomplete Bug description: Issue found on node amd64 node "kili" btrfs/153 - output mismatch (see /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/153.out.bad) --- tests/btrfs/153.out2019-10-16 10:51:13.104701643 + +++ /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/153.out.bad 2019-10-16 11:11:43.217948903 + @@ -1,2 +1,5 @@ QA output created by 153 +pwrite: Disk quota exceeded +/home/ubuntu/autotest/client/tmp/tmp/xfstests-scratch/testfile2: Disk quota exceeded +/home/ubuntu/autotest/client/tmp/tmp/xfstests-scratch/testfile2: Disk quota exceeded Silence is golden ... (Run 'diff -u /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/tests/btrfs/153.out /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/153.out.bad' to see the entire diff) $ diff -u /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/tests/btrfs/153.out /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/153.out.bad --- /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/tests/btrfs/153.out 2019-10-16 10:51:13.104701643 + +++ /home/ubuntu/autotest/client/tmp/ubuntu_xfstests_btrfs/src/xfstests-bld/xfstests-dev/results//btrfs/153.out.bad 2019-10-16 11:11:43.217948903 + @@ -1,2 +1,5 @@ QA output created by 153 +pwrite: Disk quota exceeded +/home/ubuntu/autotest/client/tmp/tmp/xfstests-scratch/testfile2: Disk quota exceeded +/home/ubuntu/autotest/client/tmp/tmp/xfstests-scratch/testfile2: Disk quota exceeded Silence is golden Syslog: Oct 16 11:11:42 kili ubuntu: run xfstest btrfs/153 Oct 16 11:11:42 kili kernel: [ 1842.274698] run fstests btrfs/153 at 2019-10-16 11:11:42 Oct 16 11:11:42 kili kernel: [ 1842.462616] BTRFS info (device sdb1): disk space caching is enabled Oct 16 11:11:42 kili kernel: [ 1842.462618] BTRFS info (device sdb1): has skinny extents Oct 16 11:11:42 kili kernel: [ 1842.466867] BTRFS info (device sdb1): enabling ssd optimizations Oct 16 11:11:42 kili kernel: [ 1842.589118] BTRFS: device fsid a48a1e75-d879-4c6b-b97a-f90804fa8e7e devid 1 transid 5 /dev/sdb2 Oct 16 11:11:42 kili kernel: [ 1842.608328] BTRFS info (device sdb2): disk space caching is enabled Oct 16 11:11:42 kili kernel: [ 1842.608330] BTRFS info (device sdb2): has skinny extents Oct 16 11:11:42 kili kernel: [ 1842.608330] BTRFS info (device sdb2): flagging fs with big metadata feature Oct 16 11:11:42 kili kernel: [ 1842.619467] BTRFS info (device sdb2): enabling ssd optimizations Oct 16 11:11:42 kili kernel: [ 1842.621633] BTRFS info (device sdb2): checking UUID tree Oct 16 11:11:42 kili kernel: [ 1842.627105] BTRFS info (device sdb2): qgroup scan completed (inconsistency flag cleared) Oct 16 11:11:42 kili kernel: [ 1842.629891] BTRFS info (device sdb2): qgroup scan completed (inconsistency flag cleared) Oct 16 11:11:42 kili systemd[1894]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dtest.mount: Succeeded. Oct 16 11:11:42 kili systemd[1]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dtest.mount: Succeeded. Oct 16 11:11:43 kili systemd[1894]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dscratch.mount: Succeeded. Oct 16 11:11:43 kili systemd[1]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dscratch.mount: Succeeded. Oct 16 11:11:43 kili kernel: [ 1842.852837] BTRFS info (device sdb2): disk space caching is enabled Oct 16 11:11:43 kili kernel: [ 1842.852839] BTRFS info (device sdb2): has skinny extents Oct 16 11:11:43 kili kernel: [ 1842.856849] BTRFS info (device sdb2): enabling ssd optimizations Oct 16 11:11:43 kili systemd[1894]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dscratch.mount: Succeeded. Oct 16 11:11:43 kili systemd[1]: home-ubuntu-autotest-client-tmp-tmp-xfstests\x2dscratch.mount: Succeeded. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: linux-image-5.0.0-31-generic 5.0.0-31.33 ProcVersionSignature: User Name 5.0.0-31.33-generic 5.0.21 Uname: Linux 5.0.0-31-generic x86_64 AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Oct 16 10:41 seq crw-rw 1 root audio 116, 33 Oct 16 10:41 timer
[Kernel-packages] [Bug 1875513] Re: wifi is not showing in select networks
By the way, I thought you shouldn't need broadcom-sta-dkms on recent kernels, please also try removing it. ** Summary changed: - wifi is not showing in select networks + Broadcom 4366 [14e4:4365] mobile wifi hotspot is not showing in select networks -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875513 Title: Broadcom 4366 [14e4:4365] mobile wifi hotspot is not showing in select networks Status in linux package in Ubuntu: Incomplete Bug description: i am trying to connect my mobile hotspot but it is not showing in select network section although my hotspot is on. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: saud 1309 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Tue Apr 28 05:41:03 2020 InstallationDate: Installed on 2020-04-27 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: TOSHIBA Satellite C55-B ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=087e4472-46b8-4204-9cc0-e37643c7ffbf ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/06/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: 1.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Type2 - Board Product Name1 dmi.board.vendor: Type2 - Board Vendor Name1 dmi.board.version: Type2 - Board Version dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: OEM Chassis Manufacturer dmi.chassis.version: OEM Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvr1.10:bd05/06/2014:svnTOSHIBA:pnSatelliteC55-B:pvrPSKSSV-00700JAR:rvnType2-BoardVendorName1:rnType2-BoardProductName1:rvrType2-BoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion: dmi.product.family: Type1Family dmi.product.name: Satellite C55-B dmi.product.sku: Type1Sku0 dmi.product.version: PSKSSV-00700JAR dmi.sys.vendor: TOSHIBA To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875513/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875513] Re: wifi is not showing in select networks
Please attach `iw list` output on your TOSHIBA Satellite C55-B, and `iwconfig` output on another system that connects to your mobile hotspot. ** Tags added: hwe-networking-wifi ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875513 Title: Broadcom 4366 [14e4:4365] mobile wifi hotspot is not showing in select networks Status in linux package in Ubuntu: Incomplete Bug description: i am trying to connect my mobile hotspot but it is not showing in select network section although my hotspot is on. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: saud 1309 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Tue Apr 28 05:41:03 2020 InstallationDate: Installed on 2020-04-27 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: TOSHIBA Satellite C55-B ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=087e4472-46b8-4204-9cc0-e37643c7ffbf ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/06/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: 1.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Type2 - Board Product Name1 dmi.board.vendor: Type2 - Board Vendor Name1 dmi.board.version: Type2 - Board Version dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: OEM Chassis Manufacturer dmi.chassis.version: OEM Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvr1.10:bd05/06/2014:svnTOSHIBA:pnSatelliteC55-B:pvrPSKSSV-00700JAR:rvnType2-BoardVendorName1:rnType2-BoardProductName1:rvrType2-BoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion: dmi.product.family: Type1Family dmi.product.name: Satellite C55-B dmi.product.sku: Type1Sku0 dmi.product.version: PSKSSV-00700JAR dmi.sys.vendor: TOSHIBA To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875513/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1874010] Re: [Ice Lake] 2-second black screen blips when using Chrome or gnome-screenshot
** Changed in: mutter (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1874010 Title: [Ice Lake] 2-second black screen blips when using Chrome or gnome- screenshot Status in linux package in Ubuntu: Confirmed Status in mutter package in Ubuntu: Invalid Bug description: Hi, Im using a HP 14s dq laptop with intel 630 graphics. I've tried both the mode setting and xserver-xorg-video-intel drivers, both result in the same 2-second black screen blips. The happens frequently using chrome, and always when using the gnome screenshot utility. Also, during boot teh screen flickers between black screen and boot splash a lot. setting nomodeset as a grub parameter stops the flickering, but is not a feasible solution as brightness can no longer be set. kind regards, ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.4.0-25.29-generic 5.4.30 Uname: Linux 5.4.0-25-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Tue Apr 21 08:15:51 2020 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu DkmsStatus: rtl8821ce, 5.5.2.1, 5.4.0-21-generic, x86_64: installed rtl8821ce, 5.5.2.1, 5.4.0-24-generic, x86_64: installed rtl8821ce, 5.5.2.1, 5.4.0-25-generic, x86_64: installed ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Device [8086:8a56] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:86c8] InstallationDate: Installed on 2020-04-16 (4 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200402) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 0408:5365 Quanta Computer, Inc. HP TrueVision HD Camera Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Lsusb-t: /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 1M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M |__ Port 3: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M |__ Port 3: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M MachineType: HP HP Laptop 14s-dq1xxx ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-25-generic root=UUID=54a7cc42-ac04-4466-b29f-16b1a7016ed0 ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display Title: Xorg freeze UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/20/2019 dmi.bios.vendor: AMI dmi.bios.version: F.09 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 86C8 dmi.board.vendor: HP dmi.board.version: 56.31 dmi.chassis.type: 10 dmi.chassis.vendor: HP dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAMI:bvrF.09:bd12/20/2019:svnHP:pnHPLaptop14s-dq1xxx:pvr:rvnHP:rn86C8:rvr56.31:cvnHP:ct10:cvrChassisVersion: dmi.product.family: 103C_5335KV HP Notebook dmi.product.name: HP Laptop 14s-dq1xxx dmi.product.sku: 8BL04EA#ABH dmi.sys.vendor: HP version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.101-2 version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.4-2ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.8-2ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1874010/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875513] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875513 Title: wifi is not showing in select networks Status in linux package in Ubuntu: Confirmed Bug description: i am trying to connect my mobile hotspot but it is not showing in select network section although my hotspot is on. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: saud 1309 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Tue Apr 28 05:41:03 2020 InstallationDate: Installed on 2020-04-27 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: TOSHIBA Satellite C55-B ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=087e4472-46b8-4204-9cc0-e37643c7ffbf ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/06/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: 1.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Type2 - Board Product Name1 dmi.board.vendor: Type2 - Board Vendor Name1 dmi.board.version: Type2 - Board Version dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: OEM Chassis Manufacturer dmi.chassis.version: OEM Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvr1.10:bd05/06/2014:svnTOSHIBA:pnSatelliteC55-B:pvrPSKSSV-00700JAR:rvnType2-BoardVendorName1:rnType2-BoardProductName1:rvrType2-BoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion: dmi.product.family: Type1Family dmi.product.name: Satellite C55-B dmi.product.sku: Type1Sku0 dmi.product.version: PSKSSV-00700JAR dmi.sys.vendor: TOSHIBA To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875513/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875513] Re: wifi is not showing in select networks
** Information type changed from Private Security to Public -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875513 Title: wifi is not showing in select networks Status in linux package in Ubuntu: New Bug description: i am trying to connect my mobile hotspot but it is not showing in select network section although my hotspot is on. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: saud 1309 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Tue Apr 28 05:41:03 2020 InstallationDate: Installed on 2020-04-27 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: TOSHIBA Satellite C55-B ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=087e4472-46b8-4204-9cc0-e37643c7ffbf ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/06/2014 dmi.bios.vendor: Insyde Corp. dmi.bios.version: 1.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Type2 - Board Product Name1 dmi.board.vendor: Type2 - Board Vendor Name1 dmi.board.version: Type2 - Board Version dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: OEM Chassis Manufacturer dmi.chassis.version: OEM Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvr1.10:bd05/06/2014:svnTOSHIBA:pnSatelliteC55-B:pvrPSKSSV-00700JAR:rvnType2-BoardVendorName1:rnType2-BoardProductName1:rvrType2-BoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion: dmi.product.family: Type1Family dmi.product.name: Satellite C55-B dmi.product.sku: Type1Sku0 dmi.product.version: PSKSSV-00700JAR dmi.sys.vendor: TOSHIBA To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875513/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1873718] Re: CSR8510 based BTA-402 Bluetooth device cannot be started
Ok, this is interesting. I just downgraded to bionic (18.04) and now the dongle is working! So something went wrong somewhere along the way but the H/W is definitely good. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to bluez in Ubuntu. https://bugs.launchpad.net/bugs/1873718 Title: CSR8510 based BTA-402 Bluetooth device cannot be started Status in bluez package in Ubuntu: Incomplete Status in linux package in Ubuntu: Incomplete Bug description: In the GUI, I can go to the Bluetooth settings and it shows BT to be off. I turn on the little switch at the top but nothing else changes. If I navigate away from this page and then back, the switch is off again. If I try to reset the device on the command line I get: seb@eragon:~$ sudo hciconfig hci0 reset Can't init device hci0: Connection timed out (110) ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: bluez 5.50-0ubuntu5.1 ProcVersionSignature: Ubuntu 5.3.0-46.38-generic 5.3.18 Uname: Linux 5.3.0-46-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Mon Apr 20 14:39:55 2020 EcryptfsInUse: Yes InterestingModules: bnep btusb bluetooth MachineType: Gigabyte Technology Co., Ltd. To be filled by O.E.M. ProcEnviron: PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_NZ.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.3.0-46-generic root=/dev/mapper/vg0-root rw rootflags=errors=remount-ro quiet splash vt.handoff=1 pti=off SourcePackage: bluez UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/23/2012 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: FA dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: 990FXA-UD3 dmi.board.vendor: AMD Corporation dmi.board.version: x.x dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrFA:bd10/23/2012:svnGigabyteTechnologyCo.,Ltd.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnAMDCorporation:rn990FXA-UD3:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: To be filled by O.E.M. dmi.product.sku: To be filled by O.E.M. dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Gigabyte Technology Co., Ltd. hciconfig: hci0:Type: Primary Bus: USB BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 DOWN RX bytes:0 acl:0 sco:0 events:0 errors:0 TX bytes:0 acl:0 sco:0 commands:1 errors:1 rfkill: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1873718/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1776654] Autopkgtest regression report (systemd/242-7ubuntu3.8)
All autopkgtests for the newly accepted systemd (242-7ubuntu3.8) for eoan have finished running. The following regressions have been reported in tests triggered by the package: systemd/242-7ubuntu3.8 (ppc64el) prometheus-postgres-exporter/unknown (armhf) gnome-desktop3/3.34.2-2ubuntu1~19.10.1 (armhf) openssh/1:8.0p1-6build1 (s390x, i386, ppc64el, arm64, armhf, amd64) snapd/2.42.1+19.10 (i386) udisks2/unknown (armhf) umockdev/0.13.2-1 (armhf) sks/unknown (armhf) network-manager/1.20.4-2ubuntu2.2 (ppc64el, arm64) asterisk/unknown (armhf) logrotate/unknown (armhf) lxc/3.0.4-0ubuntu1 (i386) netplan.io/0.98-0ubuntu1 (amd64) dbus/unknown (armhf) gvfs/1.42.1-1ubuntu1 (arm64) Please visit the excuses page listed below and investigate the failures, proceeding afterwards as per the StableReleaseUpdates policy regarding autopkgtest regressions [1]. https://people.canonical.com/~ubuntu-archive/proposed- migration/eoan/update_excuses.html#systemd [1] https://wiki.ubuntu.com/StableReleaseUpdates#Autopkgtest_Regressions Thank you! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776654 Title: systemd upstream sysusers tests fails Status in linux package in Ubuntu: Invalid Status in systemd package in Ubuntu: Fix Committed Status in linux source package in Bionic: Invalid Status in systemd source package in Bionic: Fix Committed Status in linux source package in Cosmic: Invalid Status in linux source package in Eoan: Invalid Status in systemd source package in Eoan: Fix Committed Status in linux source package in Focal: Invalid Status in systemd source package in Focal: Fix Committed Bug description: [impact] TEST-21-SYSUSERS autopkgtest fails [test case] see original description [regression potential] any regression would be limited to incorrect pass/fail of TEST-21-SYSUSERS [scope] TEST-21-SYSUSERS does not exist in Xenial, it is first contained in Bionic. This is needed for B, E, and F. [original description] https://objectstorage.prodstack4-5.canonical.com/v1/AUTH_77e2ada1e7a84929a74ba3b87153c0ac /autopkgtest-cosmic-canonical-kernel-team- bootstrap/cosmic/amd64/s/systemd/20180613_003352_38c07@/log.gz == TEST-21-SYSUSERS == make: Entering directory '/tmp/autopkgtest.phv1ss/build.sqb/src/test/TEST-21-SYSUSERS' TEST CLEANUP: Sysuser-related tests TEST SETUP: Sysuser-related tests TEST RUN: Sysuser-related tests *** Running test-1.input *** Running test-2.input *** Running test-3.input *** Running test-4.input *** Running test unhappy-1.input --- /var/tmp/systemd-test.TjNA7s/tmp/err 2018-06-13 00:22:12.805061468 + +++ unhappy-1.expected-err2018-01-28 15:58:17.0 + @@ -1 +1 @@ -Creating user xxx (n/a) with uid 312 and gid 310. +Failed to parse UID: '99': Numerical result out of range Unexpected error output for unhappy-1.input Creating user xxx (n/a) with uid 312 and gid 310. make: *** [run] Error 1 Makefile:4: recipe for target 'run' failed make: Leaving directory '/tmp/autopkgtest.phv1ss/build.sqb/src/test/TEST-21-SYSUSERS' FAILED TESTS: test/TEST-21-SYSUSERS autopkgtest [00:22:13]: test upstream: ---] upstream FAIL non-zero exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776654/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875274] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1875274/+attachment/5362136/+files/UdevDb.txt ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875274 Title: usrmerge breaks perf symbol lookup Status in linux package in Ubuntu: Confirmed Bug description: In 19.10, perf cannot find the symbols for libc even after installing libc-dbg. The symbols for libc are in: /usr/lib/debug/lib/x86_64-linux-gnu/ but libc is in: /usr/lib/x86_64-linux-gnu/ so applications expect to find the corresponding symbols at: /usr/lib/debug/usr/lib/x86_64-linux-gnu/ --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: tdowns 1637 F pulseaudio /dev/snd/pcmC1D0p: tdowns 1637 F...m pulseaudio /dev/snd/controlC0: tdowns 1637 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.10 InstallationDate: Installed on 2020-02-14 (73 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: Dell Inc. XPS 15 9550 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=0a6fd287-c693-42a9-baa6-d90a59e83b42 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-45-generic N/A linux-backports-modules-5.3.0-45-generic N/A linux-firmware1.183.5 Tags: eoan Uname: Linux 5.3.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/12/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd12/12/2019:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 15 9550 dmi.product.sku: 06E4 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875274/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875274] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1875274/+attachment/5362137/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875274 Title: usrmerge breaks perf symbol lookup Status in linux package in Ubuntu: Confirmed Bug description: In 19.10, perf cannot find the symbols for libc even after installing libc-dbg. The symbols for libc are in: /usr/lib/debug/lib/x86_64-linux-gnu/ but libc is in: /usr/lib/x86_64-linux-gnu/ so applications expect to find the corresponding symbols at: /usr/lib/debug/usr/lib/x86_64-linux-gnu/ --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: tdowns 1637 F pulseaudio /dev/snd/pcmC1D0p: tdowns 1637 F...m pulseaudio /dev/snd/controlC0: tdowns 1637 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.10 InstallationDate: Installed on 2020-02-14 (73 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: Dell Inc. XPS 15 9550 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=0a6fd287-c693-42a9-baa6-d90a59e83b42 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-45-generic N/A linux-backports-modules-5.3.0-45-generic N/A linux-firmware1.183.5 Tags: eoan Uname: Linux 5.3.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/12/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd12/12/2019:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 15 9550 dmi.product.sku: 06E4 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875274/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875274] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1875274/+attachment/5362131/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875274 Title: usrmerge breaks perf symbol lookup Status in linux package in Ubuntu: Confirmed Bug description: In 19.10, perf cannot find the symbols for libc even after installing libc-dbg. The symbols for libc are in: /usr/lib/debug/lib/x86_64-linux-gnu/ but libc is in: /usr/lib/x86_64-linux-gnu/ so applications expect to find the corresponding symbols at: /usr/lib/debug/usr/lib/x86_64-linux-gnu/ --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: tdowns 1637 F pulseaudio /dev/snd/pcmC1D0p: tdowns 1637 F...m pulseaudio /dev/snd/controlC0: tdowns 1637 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.10 InstallationDate: Installed on 2020-02-14 (73 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: Dell Inc. XPS 15 9550 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=0a6fd287-c693-42a9-baa6-d90a59e83b42 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-45-generic N/A linux-backports-modules-5.3.0-45-generic N/A linux-firmware1.183.5 Tags: eoan Uname: Linux 5.3.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/12/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd12/12/2019:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 15 9550 dmi.product.sku: 06E4 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875274/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875274] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1875274/+attachment/5362126/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875274 Title: usrmerge breaks perf symbol lookup Status in linux package in Ubuntu: Confirmed Bug description: In 19.10, perf cannot find the symbols for libc even after installing libc-dbg. The symbols for libc are in: /usr/lib/debug/lib/x86_64-linux-gnu/ but libc is in: /usr/lib/x86_64-linux-gnu/ so applications expect to find the corresponding symbols at: /usr/lib/debug/usr/lib/x86_64-linux-gnu/ --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: tdowns 1637 F pulseaudio /dev/snd/pcmC1D0p: tdowns 1637 F...m pulseaudio /dev/snd/controlC0: tdowns 1637 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.10 InstallationDate: Installed on 2020-02-14 (73 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: Dell Inc. XPS 15 9550 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=0a6fd287-c693-42a9-baa6-d90a59e83b42 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-45-generic N/A linux-backports-modules-5.3.0-45-generic N/A linux-firmware1.183.5 Tags: eoan Uname: Linux 5.3.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/12/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd12/12/2019:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 15 9550 dmi.product.sku: 06E4 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875274/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875274] Re: usrmerge breaks perf symbol lookup
apport information ** Tags added: apport-collected eoan ** Description changed: In 19.10, perf cannot find the symbols for libc even after installing libc-dbg. The symbols for libc are in: /usr/lib/debug/lib/x86_64-linux-gnu/ but libc is in: /usr/lib/x86_64-linux-gnu/ so applications expect to find the corresponding symbols at: /usr/lib/debug/usr/lib/x86_64-linux-gnu/ + --- + ProblemType: Bug + ApportVersion: 2.20.11-0ubuntu8.8 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC1: tdowns 1637 F pulseaudio + /dev/snd/pcmC1D0p: tdowns 1637 F...m pulseaudio + /dev/snd/controlC0: tdowns 1637 F pulseaudio + CurrentDesktop: ubuntu:GNOME + DistroRelease: Ubuntu 19.10 + InstallationDate: Installed on 2020-02-14 (73 days ago) + InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) + MachineType: Dell Inc. XPS 15 9550 + Package: linux (not installed) + ProcFB: 0 i915drmfb + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=0a6fd287-c693-42a9-baa6-d90a59e83b42 ro quiet splash vt.handoff=7 + ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 + RelatedPackageVersions: + linux-restricted-modules-5.3.0-45-generic N/A + linux-backports-modules-5.3.0-45-generic N/A + linux-firmware1.183.5 + Tags: eoan + Uname: Linux 5.3.0-45-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo + _MarkForUpload: True + dmi.bios.date: 12/12/2019 + dmi.bios.vendor: Dell Inc. + dmi.bios.version: 1.13.1 + dmi.board.name: 0N7TVV + dmi.board.vendor: Dell Inc. + dmi.board.version: A00 + dmi.chassis.type: 9 + dmi.chassis.vendor: Dell Inc. + dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd12/12/2019:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: + dmi.product.family: XPS + dmi.product.name: XPS 15 9550 + dmi.product.sku: 06E4 + dmi.sys.vendor: Dell Inc. ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1875274/+attachment/5362123/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875274 Title: usrmerge breaks perf symbol lookup Status in linux package in Ubuntu: Confirmed Bug description: In 19.10, perf cannot find the symbols for libc even after installing libc-dbg. The symbols for libc are in: /usr/lib/debug/lib/x86_64-linux-gnu/ but libc is in: /usr/lib/x86_64-linux-gnu/ so applications expect to find the corresponding symbols at: /usr/lib/debug/usr/lib/x86_64-linux-gnu/ --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: tdowns 1637 F pulseaudio /dev/snd/pcmC1D0p: tdowns 1637 F...m pulseaudio /dev/snd/controlC0: tdowns 1637 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.10 InstallationDate: Installed on 2020-02-14 (73 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: Dell Inc. XPS 15 9550 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=0a6fd287-c693-42a9-baa6-d90a59e83b42 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-45-generic N/A linux-backports-modules-5.3.0-45-generic N/A linux-firmware1.183.5 Tags: eoan Uname: Linux 5.3.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/12/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd12/12/2019:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 15 9550 dmi.product.sku: 06E4 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875274/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875274] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1875274/+attachment/5362132/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875274 Title: usrmerge breaks perf symbol lookup Status in linux package in Ubuntu: Confirmed Bug description: In 19.10, perf cannot find the symbols for libc even after installing libc-dbg. The symbols for libc are in: /usr/lib/debug/lib/x86_64-linux-gnu/ but libc is in: /usr/lib/x86_64-linux-gnu/ so applications expect to find the corresponding symbols at: /usr/lib/debug/usr/lib/x86_64-linux-gnu/ --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: tdowns 1637 F pulseaudio /dev/snd/pcmC1D0p: tdowns 1637 F...m pulseaudio /dev/snd/controlC0: tdowns 1637 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.10 InstallationDate: Installed on 2020-02-14 (73 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: Dell Inc. XPS 15 9550 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=0a6fd287-c693-42a9-baa6-d90a59e83b42 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-45-generic N/A linux-backports-modules-5.3.0-45-generic N/A linux-firmware1.183.5 Tags: eoan Uname: Linux 5.3.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/12/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd12/12/2019:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 15 9550 dmi.product.sku: 06E4 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875274/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875274] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1875274/+attachment/5362124/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875274 Title: usrmerge breaks perf symbol lookup Status in linux package in Ubuntu: Confirmed Bug description: In 19.10, perf cannot find the symbols for libc even after installing libc-dbg. The symbols for libc are in: /usr/lib/debug/lib/x86_64-linux-gnu/ but libc is in: /usr/lib/x86_64-linux-gnu/ so applications expect to find the corresponding symbols at: /usr/lib/debug/usr/lib/x86_64-linux-gnu/ --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: tdowns 1637 F pulseaudio /dev/snd/pcmC1D0p: tdowns 1637 F...m pulseaudio /dev/snd/controlC0: tdowns 1637 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.10 InstallationDate: Installed on 2020-02-14 (73 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: Dell Inc. XPS 15 9550 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=0a6fd287-c693-42a9-baa6-d90a59e83b42 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-45-generic N/A linux-backports-modules-5.3.0-45-generic N/A linux-firmware1.183.5 Tags: eoan Uname: Linux 5.3.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/12/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd12/12/2019:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 15 9550 dmi.product.sku: 06E4 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875274/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875274] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1875274/+attachment/5362135/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875274 Title: usrmerge breaks perf symbol lookup Status in linux package in Ubuntu: Confirmed Bug description: In 19.10, perf cannot find the symbols for libc even after installing libc-dbg. The symbols for libc are in: /usr/lib/debug/lib/x86_64-linux-gnu/ but libc is in: /usr/lib/x86_64-linux-gnu/ so applications expect to find the corresponding symbols at: /usr/lib/debug/usr/lib/x86_64-linux-gnu/ --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: tdowns 1637 F pulseaudio /dev/snd/pcmC1D0p: tdowns 1637 F...m pulseaudio /dev/snd/controlC0: tdowns 1637 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.10 InstallationDate: Installed on 2020-02-14 (73 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: Dell Inc. XPS 15 9550 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=0a6fd287-c693-42a9-baa6-d90a59e83b42 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-45-generic N/A linux-backports-modules-5.3.0-45-generic N/A linux-firmware1.183.5 Tags: eoan Uname: Linux 5.3.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/12/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd12/12/2019:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 15 9550 dmi.product.sku: 06E4 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875274/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875515] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875515 Title: Kubuntu 20.04 hangs during shutdown Status in linux package in Ubuntu: Confirmed Bug description: Fresh install of Kubuntu 20.04 hangs during shutdown. I see some RIP errors.If I wait for 15-20 mins, the machine usually shuts down (but not always). 1. Attached debug information (collected using ubuntu-bug) 2. 1.zip 1.zip has 3 files - Screenshot showing the error, two journalctl logs corresponding to two shutdown crashes. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: anand 1101 F pulseaudio /dev/snd/controlC0: anand 1101 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: KDE Date: Mon Apr 27 20:13:29 2020 InstallationDate: Installed on 2020-04-27 (0 days ago) InstallationMedia: Kubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) IwConfig: eno1 no wireless extensions. lono wireless extensions. MachineType: Gigabyte Technology Co., Ltd. B360 AORUS GAMING 3 WIFI ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=4ab861b2-c752-444f-930d-5327aa5963d6 ro RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 RfKill: SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/14/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F12 dmi.board.asset.tag: Default string dmi.board.name: B360 AORUS GAMING 3 WIFI-CF dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF12:bd03/14/2019:svnGigabyteTechnologyCo.,Ltd.:pnB360AORUSGAMING3WIFI:pvrDefaultstring:rvnGigabyteTechnologyCo.,Ltd.:rnB360AORUSGAMING3WIFI-CF:rvrx.x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: Default string dmi.product.name: B360 AORUS GAMING 3 WIFI dmi.product.sku: Default string dmi.product.version: Default string dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875515/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875274] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1875274/+attachment/5362130/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875274 Title: usrmerge breaks perf symbol lookup Status in linux package in Ubuntu: Confirmed Bug description: In 19.10, perf cannot find the symbols for libc even after installing libc-dbg. The symbols for libc are in: /usr/lib/debug/lib/x86_64-linux-gnu/ but libc is in: /usr/lib/x86_64-linux-gnu/ so applications expect to find the corresponding symbols at: /usr/lib/debug/usr/lib/x86_64-linux-gnu/ --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: tdowns 1637 F pulseaudio /dev/snd/pcmC1D0p: tdowns 1637 F...m pulseaudio /dev/snd/controlC0: tdowns 1637 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.10 InstallationDate: Installed on 2020-02-14 (73 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: Dell Inc. XPS 15 9550 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=0a6fd287-c693-42a9-baa6-d90a59e83b42 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-45-generic N/A linux-backports-modules-5.3.0-45-generic N/A linux-firmware1.183.5 Tags: eoan Uname: Linux 5.3.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/12/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd12/12/2019:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 15 9550 dmi.product.sku: 06E4 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875274/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875274] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1875274/+attachment/5362127/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875274 Title: usrmerge breaks perf symbol lookup Status in linux package in Ubuntu: Confirmed Bug description: In 19.10, perf cannot find the symbols for libc even after installing libc-dbg. The symbols for libc are in: /usr/lib/debug/lib/x86_64-linux-gnu/ but libc is in: /usr/lib/x86_64-linux-gnu/ so applications expect to find the corresponding symbols at: /usr/lib/debug/usr/lib/x86_64-linux-gnu/ --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: tdowns 1637 F pulseaudio /dev/snd/pcmC1D0p: tdowns 1637 F...m pulseaudio /dev/snd/controlC0: tdowns 1637 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.10 InstallationDate: Installed on 2020-02-14 (73 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: Dell Inc. XPS 15 9550 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=0a6fd287-c693-42a9-baa6-d90a59e83b42 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-45-generic N/A linux-backports-modules-5.3.0-45-generic N/A linux-firmware1.183.5 Tags: eoan Uname: Linux 5.3.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/12/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd12/12/2019:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 15 9550 dmi.product.sku: 06E4 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875274/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875274] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1875274/+attachment/5362125/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875274 Title: usrmerge breaks perf symbol lookup Status in linux package in Ubuntu: Confirmed Bug description: In 19.10, perf cannot find the symbols for libc even after installing libc-dbg. The symbols for libc are in: /usr/lib/debug/lib/x86_64-linux-gnu/ but libc is in: /usr/lib/x86_64-linux-gnu/ so applications expect to find the corresponding symbols at: /usr/lib/debug/usr/lib/x86_64-linux-gnu/ --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: tdowns 1637 F pulseaudio /dev/snd/pcmC1D0p: tdowns 1637 F...m pulseaudio /dev/snd/controlC0: tdowns 1637 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.10 InstallationDate: Installed on 2020-02-14 (73 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: Dell Inc. XPS 15 9550 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=0a6fd287-c693-42a9-baa6-d90a59e83b42 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-45-generic N/A linux-backports-modules-5.3.0-45-generic N/A linux-firmware1.183.5 Tags: eoan Uname: Linux 5.3.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/12/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd12/12/2019:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 15 9550 dmi.product.sku: 06E4 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875274/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875515] Re: Kubuntu 20.04 hangs during shutdown
** Description changed: Fresh install of Kubuntu 20.04 hangs during shutdown. I see some RIP - errors.If I wait for 15-20 mins, the machine usually shutsdown. + errors.If I wait for 15-20 mins, the machine usually shuts down (but not + always). 1. Attached debug information (collected using ubuntu-bug) 2. 1.zip 1.zip has 3 files - Screenshot showing the error, two journalctl logs corresponding to two shutdown crashes. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: - USERPID ACCESS COMMAND - /dev/snd/controlC1: anand 1101 F pulseaudio - /dev/snd/controlC0: anand 1101 F pulseaudio + USERPID ACCESS COMMAND + /dev/snd/controlC1: anand 1101 F pulseaudio + /dev/snd/controlC0: anand 1101 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: KDE Date: Mon Apr 27 20:13:29 2020 InstallationDate: Installed on 2020-04-27 (0 days ago) InstallationMedia: Kubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) IwConfig: - eno1 no wireless extensions. - - lono wireless extensions. + eno1 no wireless extensions. + + lono wireless extensions. MachineType: Gigabyte Technology Co., Ltd. B360 AORUS GAMING 3 WIFI ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=4ab861b2-c752-444f-930d-5327aa5963d6 ro RelatedPackageVersions: - linux-restricted-modules-5.4.0-26-generic N/A - linux-backports-modules-5.4.0-26-generic N/A - linux-firmware1.187 + linux-restricted-modules-5.4.0-26-generic N/A + linux-backports-modules-5.4.0-26-generic N/A + linux-firmware1.187 RfKill: - + SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/14/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F12 dmi.board.asset.tag: Default string dmi.board.name: B360 AORUS GAMING 3 WIFI-CF dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF12:bd03/14/2019:svnGigabyteTechnologyCo.,Ltd.:pnB360AORUSGAMING3WIFI:pvrDefaultstring:rvnGigabyteTechnologyCo.,Ltd.:rnB360AORUSGAMING3WIFI-CF:rvrx.x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: Default string dmi.product.name: B360 AORUS GAMING 3 WIFI dmi.product.sku: Default string dmi.product.version: Default string dmi.sys.vendor: Gigabyte Technology Co., Ltd. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875515 Title: Kubuntu 20.04 hangs during shutdown Status in linux package in Ubuntu: Confirmed Bug description: Fresh install of Kubuntu 20.04 hangs during shutdown. I see some RIP errors.If I wait for 15-20 mins, the machine usually shuts down (but not always). 1. Attached debug information (collected using ubuntu-bug) 2. 1.zip 1.zip has 3 files - Screenshot showing the error, two journalctl logs corresponding to two shutdown crashes. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: anand 1101 F pulseaudio /dev/snd/controlC0: anand 1101 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: KDE Date: Mon Apr 27 20:13:29 2020 InstallationDate: Installed on 2020-04-27 (0 days ago) InstallationMedia: Kubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) IwConfig: eno1 no wireless extensions. lono wireless extensions. MachineType: Gigabyte Technology Co., Ltd. B360 AORUS GAMING 3 WIFI ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=4ab861b2-c752-444f-930d-5327aa5963d6 ro RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 RfKill: SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/14/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F12 dmi.board.asset.tag: Default string dmi.board.name: B360 AORUS GAMING 3 WIFI-CF dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: Default string
[Kernel-packages] [Bug 1875274] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1875274/+attachment/5362128/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875274 Title: usrmerge breaks perf symbol lookup Status in linux package in Ubuntu: Confirmed Bug description: In 19.10, perf cannot find the symbols for libc even after installing libc-dbg. The symbols for libc are in: /usr/lib/debug/lib/x86_64-linux-gnu/ but libc is in: /usr/lib/x86_64-linux-gnu/ so applications expect to find the corresponding symbols at: /usr/lib/debug/usr/lib/x86_64-linux-gnu/ --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: tdowns 1637 F pulseaudio /dev/snd/pcmC1D0p: tdowns 1637 F...m pulseaudio /dev/snd/controlC0: tdowns 1637 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.10 InstallationDate: Installed on 2020-02-14 (73 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: Dell Inc. XPS 15 9550 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=0a6fd287-c693-42a9-baa6-d90a59e83b42 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-45-generic N/A linux-backports-modules-5.3.0-45-generic N/A linux-firmware1.183.5 Tags: eoan Uname: Linux 5.3.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/12/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd12/12/2019:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 15 9550 dmi.product.sku: 06E4 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875274/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875274] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1875274/+attachment/5362133/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875274 Title: usrmerge breaks perf symbol lookup Status in linux package in Ubuntu: Confirmed Bug description: In 19.10, perf cannot find the symbols for libc even after installing libc-dbg. The symbols for libc are in: /usr/lib/debug/lib/x86_64-linux-gnu/ but libc is in: /usr/lib/x86_64-linux-gnu/ so applications expect to find the corresponding symbols at: /usr/lib/debug/usr/lib/x86_64-linux-gnu/ --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: tdowns 1637 F pulseaudio /dev/snd/pcmC1D0p: tdowns 1637 F...m pulseaudio /dev/snd/controlC0: tdowns 1637 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.10 InstallationDate: Installed on 2020-02-14 (73 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: Dell Inc. XPS 15 9550 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=0a6fd287-c693-42a9-baa6-d90a59e83b42 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-45-generic N/A linux-backports-modules-5.3.0-45-generic N/A linux-firmware1.183.5 Tags: eoan Uname: Linux 5.3.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/12/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd12/12/2019:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 15 9550 dmi.product.sku: 06E4 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875274/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875274] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1875274/+attachment/5362129/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875274 Title: usrmerge breaks perf symbol lookup Status in linux package in Ubuntu: Confirmed Bug description: In 19.10, perf cannot find the symbols for libc even after installing libc-dbg. The symbols for libc are in: /usr/lib/debug/lib/x86_64-linux-gnu/ but libc is in: /usr/lib/x86_64-linux-gnu/ so applications expect to find the corresponding symbols at: /usr/lib/debug/usr/lib/x86_64-linux-gnu/ --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: tdowns 1637 F pulseaudio /dev/snd/pcmC1D0p: tdowns 1637 F...m pulseaudio /dev/snd/controlC0: tdowns 1637 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.10 InstallationDate: Installed on 2020-02-14 (73 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: Dell Inc. XPS 15 9550 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=0a6fd287-c693-42a9-baa6-d90a59e83b42 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-45-generic N/A linux-backports-modules-5.3.0-45-generic N/A linux-firmware1.183.5 Tags: eoan Uname: Linux 5.3.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/12/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd12/12/2019:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 15 9550 dmi.product.sku: 06E4 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875274/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875274] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1875274/+attachment/5362134/+files/PulseList.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875274 Title: usrmerge breaks perf symbol lookup Status in linux package in Ubuntu: Confirmed Bug description: In 19.10, perf cannot find the symbols for libc even after installing libc-dbg. The symbols for libc are in: /usr/lib/debug/lib/x86_64-linux-gnu/ but libc is in: /usr/lib/x86_64-linux-gnu/ so applications expect to find the corresponding symbols at: /usr/lib/debug/usr/lib/x86_64-linux-gnu/ --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu8.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: tdowns 1637 F pulseaudio /dev/snd/pcmC1D0p: tdowns 1637 F...m pulseaudio /dev/snd/controlC0: tdowns 1637 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.10 InstallationDate: Installed on 2020-02-14 (73 days ago) InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017) MachineType: Dell Inc. XPS 15 9550 Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-45-generic root=UUID=0a6fd287-c693-42a9-baa6-d90a59e83b42 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.3.0-45.37-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-45-generic N/A linux-backports-modules-5.3.0-45-generic N/A linux-firmware1.183.5 Tags: eoan Uname: Linux 5.3.0-45-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/12/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.13.1 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.13.1:bd12/12/2019:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.family: XPS dmi.product.name: XPS 15 9550 dmi.product.sku: 06E4 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875274/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875515] [NEW] Kubuntu 20.04 hangs during shutdown
Public bug reported: Fresh install of Kubuntu 20.04 hangs during shutdown. I see some RIP errors.If I wait for 15-20 mins, the machine usually shutsdown. 1. Attached debug information (collected using ubuntu-bug) 2. 1.zip 1.zip has 3 files - Screenshot showing the error, two journalctl logs corresponding to two shutdown crashes. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: anand 1101 F pulseaudio /dev/snd/controlC0: anand 1101 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: KDE Date: Mon Apr 27 20:13:29 2020 InstallationDate: Installed on 2020-04-27 (0 days ago) InstallationMedia: Kubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) IwConfig: eno1 no wireless extensions. lono wireless extensions. MachineType: Gigabyte Technology Co., Ltd. B360 AORUS GAMING 3 WIFI ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=4ab861b2-c752-444f-930d-5327aa5963d6 ro RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 RfKill: SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/14/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F12 dmi.board.asset.tag: Default string dmi.board.name: B360 AORUS GAMING 3 WIFI-CF dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF12:bd03/14/2019:svnGigabyteTechnologyCo.,Ltd.:pnB360AORUSGAMING3WIFI:pvrDefaultstring:rvnGigabyteTechnologyCo.,Ltd.:rnB360AORUSGAMING3WIFI-CF:rvrx.x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: Default string dmi.product.name: B360 AORUS GAMING 3 WIFI dmi.product.sku: Default string dmi.product.version: Default string dmi.sys.vendor: Gigabyte Technology Co., Ltd. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal ** Attachment added: "1.zip" https://bugs.launchpad.net/bugs/1875515/+attachment/5362105/+files/1.zip -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875515 Title: Kubuntu 20.04 hangs during shutdown Status in linux package in Ubuntu: New Bug description: Fresh install of Kubuntu 20.04 hangs during shutdown. I see some RIP errors.If I wait for 15-20 mins, the machine usually shutsdown. 1. Attached debug information (collected using ubuntu-bug) 2. 1.zip 1.zip has 3 files - Screenshot showing the error, two journalctl logs corresponding to two shutdown crashes. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: anand 1101 F pulseaudio /dev/snd/controlC0: anand 1101 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: KDE Date: Mon Apr 27 20:13:29 2020 InstallationDate: Installed on 2020-04-27 (0 days ago) InstallationMedia: Kubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) IwConfig: eno1 no wireless extensions. lono wireless extensions. MachineType: Gigabyte Technology Co., Ltd. B360 AORUS GAMING 3 WIFI ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=4ab861b2-c752-444f-930d-5327aa5963d6 ro RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 RfKill: SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/14/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F12 dmi.board.asset.tag: Default string dmi.board.name: B360 AORUS GAMING 3 WIFI-CF dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF12:bd03/14/2019:svnGigabyteTechnologyCo.,Ltd.:pnB360AORUSGAMING3WIFI:pvrDefaultstring:rvnGigabyteTechnologyCo.,Ltd.:rnB360AORUSGAMING3WIFI-CF:rvrx.x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: Default string
[Kernel-packages] [Bug 1848771]
(In reply to Ferry Toth from comment #36) > On Ubuntu 19:10 linux 5.3.0-46 (resume bad): > ferry@chromium:~$ cat /sys/power/mem_sleep > s2idle [deep] > root@chromium:~# rtcwake -m mem -s 30 > > After 30 sec takes me to boot screen. > So it reboots during resume. it's quite hard to track at which stage it reboots if there's no uart log. Since the S3 works in old kernel, The most straight way is to do a git bisect to find the offender. Or else, we have to add hack code during resume to spin the kernel at different place thus to narrow down. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1848771 Title: Reboot after resume from suspend (deep) Status in linux package in Ubuntu: Incomplete Status in ubuntu-release-upgrader package in Ubuntu: Invalid Bug description: After upgrading to Kubuntu Eoan (19.10) yesterday, my laptop crashes after resume from suspending. This is regardless the way of suspending (closing lid, selecting suspend from sddm, systemctl suspend). The journal shows: ferry@chromium:~$ journalctl -b -1 -e .. sddm[1106]: Message received from greeter: Suspend NetworkManager[836]: manager: sleep: sleep requested (sleeping: no enabled: yes) NetworkManager[836]: device (60:73:BC:BA:B8:68): state change: disconnected -> unmanaged (reason ' NetworkManager[836]: device (60:73:BC:23:8F:3E): state change: disconnected -> unmanaged (reason ' NetworkManager[836]: device (p2p-dev-wlp1s0): state change: disconnected -> unmanaged (reason 'sle NetworkManager[836]: manager: NetworkManager state is now ASLEEP systemd[1]: Reached target Sleep. systemd[1]: Starting Suspend... systemd-sleep[1238]: Suspending system... kernel: PM: suspend entry (deep) On resume (keypress, open lid) resume starts but immediately crashes and reboots. The laptop is an Acer 720p Chromebook with Chromium replaced and working fine with Kubuntu since 5 years or so. ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: ubuntu-release-upgrader-core 1:19.10.15 ProcVersionSignature: Ubuntu 5.3.0-18.19-generic 5.3.1 Uname: Linux 5.3.0-18-generic x86_64 ApportVersion: 2.20.11-0ubuntu8 Architecture: amd64 CrashDB: ubuntu CurrentDesktop: KDE Date: Fri Oct 18 18:45:53 2019 InstallationDate: Installed on 2017-07-13 (826 days ago) InstallationMedia: Kubuntu 17.04 "Zesty Zapus" - Release amd64 (20170412) PackageArchitecture: all SourcePackage: ubuntu-release-upgrader Symptom: ubuntu-release-upgrader UpgradeStatus: Upgraded to eoan on 2019-10-17 (0 days ago) VarLogDistupgradeTermlog: To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1848771/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1868551] Re: Intel GPU Hangs : random screen freezing w/ Ubuntu 20.04 (Linux 5.4) i915_active_acquire
For now (1 hour and 40 minutes running glxgears in one screen), the system hasn't crashed. With the following command line: BOOT_IMAGE=/boot/vmlinuz-5.4.30+ root=UUID=6b4ae5c0-c78c-49a6-a1ba- 029192618a7a ro quiet ro kvm.ignore_msrs=1 kvm.report_ignored_msrs=0 kvm.halt_poll_ns=0 kvm.halt_poll_ns_grow=0 i915.enable_fbc=0 i915.enable_gvt=1 resume=UUID=a82e38a0-8d20-49dd-9cbd-de7216b589fc log_buf_len=16M usbhid.quirks=0x0079:0x0006:0x10 mtrr_gran_size=64M mtrr_chunk_size=64M nbd.nbds_max=2 nbd.max_part=63 cgroup_enable=memory swapaccount=1 The crash hasn't happened, but the Atomic update failure messages are still present and happening relatively often. Strange how the kernel from command 34 was fine until i915.enable_fbc=0 was set. By the way, does the bisect from the duplicate make sense? I found the result strange, but it seemed to fix it to me. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1868551 Title: Intel GPU Hangs : random screen freezing w/ Ubuntu 20.04 (Linux 5.4) i915_active_acquire Status in linux package in Ubuntu: Confirmed Bug description: uname -a Linux xps 5.4.0-14-generic #17-Ubuntu SMP Thu Feb 6 22:47:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu Focal Fossa (development branch) Release: 20.04 Codename: focal [ 2556.956079] BUG: kernel NULL pointer dereference, address: 0040 [ 2556.956084] #PF: supervisor read access in kernel mode [ 2556.956084] #PF: error_code(0x) - not-present page [ 2556.956085] PGD 0 P4D 0 [ 2556.956088] Oops: [#1] SMP NOPTI [ 2556.956090] CPU: 2 PID: 1685 Comm: xfwm4 Not tainted 5.4.0-14-generic #17-Ubuntu [ 2556.956092] Hardware name: Dell Inc. XPS 13 7390/0G2D0W, BIOS 1.2.0 10/03/2019 [ 2556.956161] RIP: 0010:i915_active_acquire+0xe/0x80 [i915] [ 2556.956163] Code: 00 48 c7 c6 11 4d 6b c0 e8 af a1 d6 c7 5d c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 <8b> 47 38 48 89 fb 85 c0 74 17 8d 50 01 f0 0f b1 53 38 75 f2 45 31 [ 2556.956164] RSP: 0018:ac17c13279c8 EFLAGS: 00010286 [ 2556.956165] RAX: RBX: 983831d3e480 RCX: [ 2556.956166] RDX: 983783475200 RSI: 983831d3e480 RDI: 0008 [ 2556.956167] RBP: ac17c13279e0 R08: R09: 98382d6b6520 [ 2556.956168] R10: 6cc0 R11: 983838b4db00 R12: 983783475200 [ 2556.956169] R13: 0008 R14: 983783475200 R15: 98382d6b6400 [ 2556.956170] FS: 7f9031c28f00() GS:98383e50() knlGS: [ 2556.956171] CS: 0010 DS: ES: CR0: 80050033 [ 2556.956172] CR2: 0040 CR3: 00046eac6001 CR4: 003606e0 [ 2556.956173] Call Trace: [ 2556.956199] i915_active_ref+0x24/0x200 [i915] [ 2556.956223] i915_vma_move_to_active+0x74/0xf0 [i915] [ 2556.956245] eb_submit+0xff/0x440 [i915] [ 2556.956267] i915_gem_do_execbuffer+0x88e/0xc20 [i915] [ 2556.956271] ? sock_def_readable+0x40/0x70 [ 2556.956274] ? __kmalloc_node+0x205/0x320 [ 2556.956294] i915_gem_execbuffer2_ioctl+0x2c3/0x3d0 [i915] [ 2556.956314] ? i915_gem_execbuffer_ioctl+0x2d0/0x2d0 [i915] [ 2556.956330] drm_ioctl_kernel+0xae/0xf0 [drm] [ 2556.956338] drm_ioctl+0x234/0x3d0 [drm] [ 2556.956358] ? i915_gem_execbuffer_ioctl+0x2d0/0x2d0 [i915] [ 2556.956361] ? vfs_writev+0xc3/0xf0 [ 2556.956363] do_vfs_ioctl+0x407/0x670 [ 2556.956365] ? fput+0x13/0x15 [ 2556.956367] ? __sys_recvmsg+0x88/0xa0 [ 2556.956369] ksys_ioctl+0x67/0x90 [ 2556.956371] __x64_sys_ioctl+0x1a/0x20 [ 2556.956373] do_syscall_64+0x57/0x190 [ 2556.956376] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 2556.956377] RIP: 0033:0x7f9032b3f68b [ 2556.956379] Code: 0f 1e fa 48 8b 05 05 28 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d d5 27 0d 00 f7 d8 64 89 01 48 [ 2556.956380] RSP: 002b:7ffee39a0078 EFLAGS: 0246 ORIG_RAX: 0010 [ 2556.956381] RAX: ffda RBX: 55a8abeb6e48 RCX: 7f9032b3f68b [ 2556.956382] RDX: 7ffee39a0090 RSI: 40406469 RDI: 000d [ 2556.956382] RBP: 7ffee39a0120 R08: 0001 R09: [ 2556.956383] R10: 7ffee39a0140 R11: 0246 R12: 7f9022a4f460 [ 2556.956384] R13: R14: 7ffee39a0090 R15: 000d [ 2556.956385] Modules linked in: ccm rfcomm xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp ip6table_mangle ip6table_nat typec_displayport iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables cmac nfnetlink algif_hash
[Kernel-packages] [Bug 1874933] Re: Performance workaround for Dell 7390 2-in-1 Ice Lake
Please change this to "Confirmed". As you can see the power limits, it will limit performance from what you can get at 15W. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1874933 Title: Performance workaround for Dell 7390 2-in-1 Ice Lake Status in linux package in Ubuntu: Incomplete Bug description: As reported here: https://www.phoronix.com/forums/forum/linux-graphics-x-org-drivers/intel-linux/1174225-dell-xps-7390-intel-ice-lake-performance-hit-hard-by-a-linux-kernel-regression?view=stream This primarily impacts "Ubuntu 20.04 LTS (Focal Fossa)." as it switched to 5.4 kernel. The 5.4 kernel added support for "Processor thermal device", for Ice Lake, which will expose the power tables (via PPCC). This system default "max RAPL long term power limit" is 15W. But this power table is specifying as 9W. So thermald will limit power to 9W. If dptfxtract is executed, then power limit will be higher than power up value, but most of the users will use out of the box setup. So this need a workaround. This workaround will ignore any power limit less than the power up power limit. This is addressed in thermald 2.1 with two commits: https://github.com/intel/thermal_daemon/commit/f7db434293387c965e8d9141608f855893740e3a https://github.com/intel/thermal_daemon/commit/c3461690eafb7304bf59a39fb02955a5154b3861 I know 20.04 LTS uses 1.9.1. I can assist in backport if required. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1874933/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1874933] Re: Performance workaround for Dell 7390 2-in-1 Ice Lake
Power limits from this platform: abuser@labuser-XPS-13-7390-2-in-1:/$ grep -r . sys/bus/pci/devices/\:00\:04.0/power_limits/* sys/bus/pci/devices/:00:04.0/power_limits/power_limit_0_max_uw:900 sys/bus/pci/devices/:00:04.0/power_limits/power_limit_0_min_uw:250 sys/bus/pci/devices/:00:04.0/power_limits/power_limit_0_step_uw:10 sys/bus/pci/devices/:00:04.0/power_limits/power_limit_0_tmax_us:2800 sys/bus/pci/devices/:00:04.0/power_limits/power_limit_0_tmin_us:2400 sys/bus/pci/devices/:00:04.0/power_limits/power_limit_1_max_uw:1500 sys/bus/pci/devices/:00:04.0/power_limits/power_limit_1_min_uw:600 sys/bus/pci/devices/:00:04.0/power_limits/power_limit_1_step_uw:10 sys/bus/pci/devices/:00:04.0/power_limits/power_limit_1_tmax_us:2800 sys/bus/pci/devices/:00:04.0/power_limits/power_limit_1_tmin_us:2400 You can see 900 as max power limit 0. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1874933 Title: Performance workaround for Dell 7390 2-in-1 Ice Lake Status in linux package in Ubuntu: Incomplete Bug description: As reported here: https://www.phoronix.com/forums/forum/linux-graphics-x-org-drivers/intel-linux/1174225-dell-xps-7390-intel-ice-lake-performance-hit-hard-by-a-linux-kernel-regression?view=stream This primarily impacts "Ubuntu 20.04 LTS (Focal Fossa)." as it switched to 5.4 kernel. The 5.4 kernel added support for "Processor thermal device", for Ice Lake, which will expose the power tables (via PPCC). This system default "max RAPL long term power limit" is 15W. But this power table is specifying as 9W. So thermald will limit power to 9W. If dptfxtract is executed, then power limit will be higher than power up value, but most of the users will use out of the box setup. So this need a workaround. This workaround will ignore any power limit less than the power up power limit. This is addressed in thermald 2.1 with two commits: https://github.com/intel/thermal_daemon/commit/f7db434293387c965e8d9141608f855893740e3a https://github.com/intel/thermal_daemon/commit/c3461690eafb7304bf59a39fb02955a5154b3861 I know 20.04 LTS uses 1.9.1. I can assist in backport if required. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1874933/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1874933] Re: Performance workaround for Dell 7390 2-in-1 Ice Lake
I am not sure what is the thinkpad issue. Is it something new or old which should have been fixed with dptfxtract and thermald? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1874933 Title: Performance workaround for Dell 7390 2-in-1 Ice Lake Status in linux package in Ubuntu: Incomplete Bug description: As reported here: https://www.phoronix.com/forums/forum/linux-graphics-x-org-drivers/intel-linux/1174225-dell-xps-7390-intel-ice-lake-performance-hit-hard-by-a-linux-kernel-regression?view=stream This primarily impacts "Ubuntu 20.04 LTS (Focal Fossa)." as it switched to 5.4 kernel. The 5.4 kernel added support for "Processor thermal device", for Ice Lake, which will expose the power tables (via PPCC). This system default "max RAPL long term power limit" is 15W. But this power table is specifying as 9W. So thermald will limit power to 9W. If dptfxtract is executed, then power limit will be higher than power up value, but most of the users will use out of the box setup. So this need a workaround. This workaround will ignore any power limit less than the power up power limit. This is addressed in thermald 2.1 with two commits: https://github.com/intel/thermal_daemon/commit/f7db434293387c965e8d9141608f855893740e3a https://github.com/intel/thermal_daemon/commit/c3461690eafb7304bf59a39fb02955a5154b3861 I know 20.04 LTS uses 1.9.1. I can assist in backport if required. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1874933/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875506] [NEW] Bionic update: upstream stable patchset 2020-04-27
Public bug reported:
SRU Justification
Impact:
The upstream process for stable tree updates is quite similar
in scope to the Ubuntu SRU process, e.g., each patch has to
demonstrably fix a bug, and each patch is vetted by upstream
by originating either directly from a mainline/stable Linux tree or
a minimally backported form of that patch. The following upstream
stable patches should be included in the Ubuntu kernel:
upstream stable patchset 2020-04-27
Ported from the following upstream stable releases:
v4.14.177, v4.19.117
v4.19.118
from git://git.kernel.org/
KVM: VMX: fix crash cleanup when KVM wasn't used
amd-xgbe: Use __napi_schedule() in BH context
hsr: check protocol version in hsr_newlink()
net: ipv4: devinet: Fix crash when add/del multicast IP with autojoin
net: ipv6: do not consider routes via gateways for anycast address check
net: qrtr: send msgs from local of same id as broadcast
net: revert default NAPI poll timeout to 2 jiffies
net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic
jbd2: improve comments about freeing data buffers whose page mapping is NULL
pwm: pca9685: Fix PWM/GPIO inter-operation
ext4: fix incorrect group count in ext4_fill_super error message
ext4: fix incorrect inodes per group in error message
ASoC: Intel: mrfld: fix incorrect check on p->sink
ASoC: Intel: mrfld: return error codes when an error occurs
ALSA: usb-audio: Don't override ignore_ctl_error value from the map
tracing: Fix the race between registering 'snapshot' event trigger and
triggering 'snapshot' operation
btrfs: check commit root generation in should_ignore_root
mac80211_hwsim: Use kstrndup() in place of kasprintf()
ext4: do not zeroout extents beyond i_disksize
dm flakey: check for null arg_name in parse_features()
kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD
x86/microcode/AMD: Increase microcode PATCH_MAX_SIZE
x86/intel_rdt: Add two new resources for L2 Code and Data Prioritization (CDP)
x86/intel_rdt: Enable L2 CDP in MSR IA32_L2_QOS_CFG
x86/resctrl: Preserve CDP enable over CPU hotplug
x86/resctrl: Fix invalid attempt at removing the default resource group
mm/vmalloc.c: move 'area->pages' after if statement
objtool: Fix switch table detection in .text.unlikely
scsi: sg: add sg_remove_request in sg_common_write
ext4: use non-movable memory for superblock readahead
arm, bpf: Fix bugs with ALU64 {RSH, ARSH} BPF_K shift by 0
netfilter: nf_tables: report EOPNOTSUPP on unsupported flags/object type
irqchip/mbigen: Free msi_desc on device teardown
ALSA: hda: Don't release card at firmware loading error
lib/raid6: use vdupq_n_u8 to avoid endianness warnings
video: fbdev: sis: Remove unnecessary parentheses and commented code
drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
clk: Fix debugfs_create_*() usage
Revert "gpio: set up initial state from .get_direction()"
wil6210: increase firmware ready timeout
wil6210: fix temperature debugfs
scsi: ufs: make sure all interrupts are processed
scsi: ufs: ufs-qcom: remove broken hci version quirk
wil6210: rate limit wil_rx_refill error
rpmsg: glink: use put_device() if device_register fail
rtc: pm8xxx: Fix issue in RTC write path
rpmsg: glink: Fix missing mutex_init() in qcom_glink_alloc_channel()
rpmsg: glink: smem: Ensure ordering during tx
wil6210: fix PCIe bus mastering in case of interface down
wil6210: add block size checks during FW load
wil6210: fix length check in __wmi_send
wil6210: abort properly in cfg suspend
rbd: avoid a deadlock on header_rwsem when flushing notifies
rbd: call rbd_dev_unprobe() after unwatching and flushing notifies
of: unittest: kmemleak in of_unittest_platform_populate()
clk: at91: usb: continue if clk_hw_round_rate() return zero
power: supply: bq27xxx_battery: Silence deferred-probe error
clk: tegra: Fix Tegra PMC clock out parents
soc: imx: gpc: fix power up sequencing
rtc: 88pm860x: fix possible race condition
NFSv4/pnfs: Return valid stateids in nfs_layout_find_inode_by_stateid()
NFS: direct.c: Fix memory leak of dreq when nfs_get_lock_context fails
s390/cpuinfo: fix wrong output when CPU0 is offline
powerpc/maple: Fix declaration made after definition
ext4: do not commit super on read-only bdev
include/linux/swapops.h: correct guards for non_swap_entry()
percpu_counter: fix a data race at vm_committed_as
compiler.h: fix error in BUILD_BUG_ON() reporting
KVM: s390: vsie: Fix possible race when shadowing region 3 tables
x86: ACPI: fix CPU hotplug deadlock
drm/amdkfd: kfree the wrong pointer
NFS: Fix memory leaks in nfs_pageio_stop_mirroring()
iommu/vt-d: Fix mm reference leak
ext2: fix empty body warnings when -Wextra is used
ext2: fix debug reference to ext2_xattr_cache
libnvdimm: Out of bounds read in __nd_ioctl()
iommu/amd: Fix the configuration of GCR3 table root pointer
net: dsa:
[Kernel-packages] [Bug 1873506] Re: ubuntu/focal64 fails to mount Vagrant shared folders
Fix sent: https://lists.ubuntu.com/archives/kernel- team/2020-April/109405.html -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1873506 Title: ubuntu/focal64 fails to mount Vagrant shared folders Status in cloud-images: Confirmed Status in linux package in Ubuntu: In Progress Status in linux source package in Eoan: New Status in linux source package in Focal: New Bug description: SRU Justification Impact: When our kernel packaging was updated to build the virtualbox guest packages by downloading the dkms package, the modules were accidentally moved to linux-modules-extra instead of linux-modules. This has caused the modules to go missing in our Vagrant images. Fix: Move the modules back to linux-modules. Test Case: Build the kernel packages and confirm that the vboxguest and vboxsf drivers are now in linux-modules rather than linux-modules- extra. Regression Potential: Since linux-modules is required, anyone who is using the vbox drivers will continue to have them after this change. Therefore the risk of regression is extremely low. --- Attempting to `vagrant up` using the `ubuntu/focal64` box fails to mount the `/vagrant` shared folder. `ubuntu/bionic64` works as expected. Here is the Vagrant error message: Vagrant was unable to mount VirtualBox shared folders. This is usually because the filesystem "vboxsf" is not available. This filesystem is made available via the VirtualBox Guest Additions and kernel module. Please verify that these guest additions are properly installed in the guest. This is not a bug in Vagrant and is usually caused by a faulty Vagrant box. For context, the command attempted was: mount -t vboxsf -o uid=1000,gid=1000 vagrant /vagrant The error output from the command was: : No such device To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-images/+bug/1873506/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1873506] Re: ubuntu/focal64 fails to mount Vagrant shared folders
** Description changed: - Attempting to `vagrant up` using the `ubuntu/focal64` box fails to mount - the `/vagrant` shared folder. `ubuntu/bionic64` works as expected. Here - is the Vagrant error message: + SRU Justification + + Impact: When our kernel packaging was updated to build the virtualbox + guest packages by downloading the dkms package, the modules were + accidentally moved to linux-modules-extra instead of linux-modules. This + has caused the modules to go missing in our Vagrant images. + + Fix: Move the modules back to linux-modules. + + Test Case: Build the kernel packages and confirm that the vboxguest and + vboxsf drivers are now in linux-modules rather than linux-modules-extra. + + Regression Potential: Since linux-modules is required, anyone who is + using the vbox drivers will continue to have them after this change. + Therefore the risk of regression is extremely low. + + + --- + + + Attempting to `vagrant up` using the `ubuntu/focal64` box fails to mount the `/vagrant` shared folder. `ubuntu/bionic64` works as expected. Here is the Vagrant error message: Vagrant was unable to mount VirtualBox shared folders. This is usually because the filesystem "vboxsf" is not available. This filesystem is made available via the VirtualBox Guest Additions and kernel module. Please verify that these guest additions are properly installed in the guest. This is not a bug in Vagrant and is usually caused by a faulty Vagrant box. For context, the command attempted was: mount -t vboxsf -o uid=1000,gid=1000 vagrant /vagrant The error output from the command was: : No such device -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1873506 Title: ubuntu/focal64 fails to mount Vagrant shared folders Status in cloud-images: Confirmed Status in linux package in Ubuntu: In Progress Status in linux source package in Eoan: New Status in linux source package in Focal: New Bug description: SRU Justification Impact: When our kernel packaging was updated to build the virtualbox guest packages by downloading the dkms package, the modules were accidentally moved to linux-modules-extra instead of linux-modules. This has caused the modules to go missing in our Vagrant images. Fix: Move the modules back to linux-modules. Test Case: Build the kernel packages and confirm that the vboxguest and vboxsf drivers are now in linux-modules rather than linux-modules- extra. Regression Potential: Since linux-modules is required, anyone who is using the vbox drivers will continue to have them after this change. Therefore the risk of regression is extremely low. --- Attempting to `vagrant up` using the `ubuntu/focal64` box fails to mount the `/vagrant` shared folder. `ubuntu/bionic64` works as expected. Here is the Vagrant error message: Vagrant was unable to mount VirtualBox shared folders. This is usually because the filesystem "vboxsf" is not available. This filesystem is made available via the VirtualBox Guest Additions and kernel module. Please verify that these guest additions are properly installed in the guest. This is not a bug in Vagrant and is usually caused by a faulty Vagrant box. For context, the command attempted was: mount -t vboxsf -o uid=1000,gid=1000 vagrant /vagrant The error output from the command was: : No such device To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-images/+bug/1873506/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1868551] Re: Intel GPU Hangs : random screen freezing w/ Ubuntu 20.04 (Linux 5.4) i915_active_acquire
@leozinho29-eu Please try this kernel: https://kernel.ubuntu.com/~sultan/i915-lp1868551/ Note that there really is only one package to install. That single package contains everything. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1868551 Title: Intel GPU Hangs : random screen freezing w/ Ubuntu 20.04 (Linux 5.4) i915_active_acquire Status in linux package in Ubuntu: Confirmed Bug description: uname -a Linux xps 5.4.0-14-generic #17-Ubuntu SMP Thu Feb 6 22:47:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu Focal Fossa (development branch) Release: 20.04 Codename: focal [ 2556.956079] BUG: kernel NULL pointer dereference, address: 0040 [ 2556.956084] #PF: supervisor read access in kernel mode [ 2556.956084] #PF: error_code(0x) - not-present page [ 2556.956085] PGD 0 P4D 0 [ 2556.956088] Oops: [#1] SMP NOPTI [ 2556.956090] CPU: 2 PID: 1685 Comm: xfwm4 Not tainted 5.4.0-14-generic #17-Ubuntu [ 2556.956092] Hardware name: Dell Inc. XPS 13 7390/0G2D0W, BIOS 1.2.0 10/03/2019 [ 2556.956161] RIP: 0010:i915_active_acquire+0xe/0x80 [i915] [ 2556.956163] Code: 00 48 c7 c6 11 4d 6b c0 e8 af a1 d6 c7 5d c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 <8b> 47 38 48 89 fb 85 c0 74 17 8d 50 01 f0 0f b1 53 38 75 f2 45 31 [ 2556.956164] RSP: 0018:ac17c13279c8 EFLAGS: 00010286 [ 2556.956165] RAX: RBX: 983831d3e480 RCX: [ 2556.956166] RDX: 983783475200 RSI: 983831d3e480 RDI: 0008 [ 2556.956167] RBP: ac17c13279e0 R08: R09: 98382d6b6520 [ 2556.956168] R10: 6cc0 R11: 983838b4db00 R12: 983783475200 [ 2556.956169] R13: 0008 R14: 983783475200 R15: 98382d6b6400 [ 2556.956170] FS: 7f9031c28f00() GS:98383e50() knlGS: [ 2556.956171] CS: 0010 DS: ES: CR0: 80050033 [ 2556.956172] CR2: 0040 CR3: 00046eac6001 CR4: 003606e0 [ 2556.956173] Call Trace: [ 2556.956199] i915_active_ref+0x24/0x200 [i915] [ 2556.956223] i915_vma_move_to_active+0x74/0xf0 [i915] [ 2556.956245] eb_submit+0xff/0x440 [i915] [ 2556.956267] i915_gem_do_execbuffer+0x88e/0xc20 [i915] [ 2556.956271] ? sock_def_readable+0x40/0x70 [ 2556.956274] ? __kmalloc_node+0x205/0x320 [ 2556.956294] i915_gem_execbuffer2_ioctl+0x2c3/0x3d0 [i915] [ 2556.956314] ? i915_gem_execbuffer_ioctl+0x2d0/0x2d0 [i915] [ 2556.956330] drm_ioctl_kernel+0xae/0xf0 [drm] [ 2556.956338] drm_ioctl+0x234/0x3d0 [drm] [ 2556.956358] ? i915_gem_execbuffer_ioctl+0x2d0/0x2d0 [i915] [ 2556.956361] ? vfs_writev+0xc3/0xf0 [ 2556.956363] do_vfs_ioctl+0x407/0x670 [ 2556.956365] ? fput+0x13/0x15 [ 2556.956367] ? __sys_recvmsg+0x88/0xa0 [ 2556.956369] ksys_ioctl+0x67/0x90 [ 2556.956371] __x64_sys_ioctl+0x1a/0x20 [ 2556.956373] do_syscall_64+0x57/0x190 [ 2556.956376] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 2556.956377] RIP: 0033:0x7f9032b3f68b [ 2556.956379] Code: 0f 1e fa 48 8b 05 05 28 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d d5 27 0d 00 f7 d8 64 89 01 48 [ 2556.956380] RSP: 002b:7ffee39a0078 EFLAGS: 0246 ORIG_RAX: 0010 [ 2556.956381] RAX: ffda RBX: 55a8abeb6e48 RCX: 7f9032b3f68b [ 2556.956382] RDX: 7ffee39a0090 RSI: 40406469 RDI: 000d [ 2556.956382] RBP: 7ffee39a0120 R08: 0001 R09: [ 2556.956383] R10: 7ffee39a0140 R11: 0246 R12: 7f9022a4f460 [ 2556.956384] R13: R14: 7ffee39a0090 R15: 000d [ 2556.956385] Modules linked in: ccm rfcomm xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp ip6table_mangle ip6table_nat typec_displayport iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables cmac nfnetlink algif_hash ip6table_filter ip6_tables iptable_filter algif_skcipher af_alg bpfilter bridge stp llc snd_sof_pci snd_sof_intel_hda_common snd_soc_hdac_hda snd_sof_intel_hda snd_sof_intel_byt snd_sof_intel_ipc snd_sof snd_sof_xtensa_dsp snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_hdmi snd_soc_core snd_compress ac97_bus snd_pcm_dmaengine bnep snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_intel_nhlt snd_hda_codec snd_hda_core snd_hwdep snd_pcm nls_iso8859_1 mei_hdcp intel_rapl_msr snd_seq_midi snd_seq_midi_event dell_laptop ledtrig_audio snd_rawmidi x86_pkg_temp_thermal intel_powerclamp coretemp joydev kvm_intel kvm cdc_ether intel_cstate
[Kernel-packages] [Bug 1860697] Re: Sound doesn't work on Lenovo X1 Carbon 7th with 20.04
Not fixed. I had upgraded to 20.04 on 24th April, and everything worked. Today, it does not. My sound-card (the one I use) no longer shows up. The nVidia HDMI sound-card still does, (but I have not had an HDMI monitor for awhile, now). I have tried every fix I can possibly find on the web, but the funny thing is, it worked for three days! Even the dmic_detect=0 trick did not work. kernel 5.4.0-26 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1860697 Title: Sound doesn't work on Lenovo X1 Carbon 7th with 20.04 Status in linux package in Ubuntu: Fix Released Status in linux-firmware package in Ubuntu: Fix Released Bug description: I recently upgraded from 18.04+HWE kernel to 20.04 and now sound, both output and input, does not work. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-9-generic 5.4.0-9.12 ProcVersionSignature: Ubuntu 5.4.0-9.12-generic 5.4.3 Uname: Linux 5.4.0-9-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu15 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CurrentDesktop: ubuntu:GNOME Date: Thu Jan 23 12:00:01 2020 InstallationDate: Installed on 2019-09-06 (139 days ago) InstallationMedia: Ubuntu 18.04.3 LTS "Bionic Beaver" - Release amd64 (20190805) MachineType: LENOVO 20QDCTO1WW ProcEnviron: SHELL=/bin/bash LANG=en_US.UTF-8 TERM=xterm-256color XDG_RUNTIME_DIR= PATH=(custom, user) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.4.0-9-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-9-generic N/A linux-backports-modules-5.4.0-9-generic N/A linux-firmware 1.184 SourcePackage: linux UpgradeStatus: Upgraded to focal on 2020-01-22 (1 days ago) dmi.bios.date: 12/09/2019 dmi.bios.vendor: LENOVO dmi.bios.version: N2HET43W (1.26 ) dmi.board.asset.tag: Not Available dmi.board.name: 20QDCTO1WW dmi.board.vendor: LENOVO dmi.board.version: SDK0J40709 WIN dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: None dmi.modalias: dmi:bvnLENOVO:bvrN2HET43W(1.26):bd12/09/2019:svnLENOVO:pn20QDCTO1WW:pvrThinkPadX1Carbon7th:rvnLENOVO:rn20QDCTO1WW:rvrSDK0J40709WIN:cvnLENOVO:ct10:cvrNone: dmi.product.family: ThinkPad X1 Carbon 7th dmi.product.name: 20QDCTO1WW dmi.product.sku: LENOVO_MT_20QD_BU_Think_FM_ThinkPad X1 Carbon 7th dmi.product.version: ThinkPad X1 Carbon 7th dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1860697/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875486] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: Confirmed Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf:
[Kernel-packages] [Bug 1868551] Re: Intel GPU Hangs : random screen freezing w/ Ubuntu 20.04 (Linux 5.4) i915_active_acquire
@leozinho29-eu For some reason, the builder I used to make the kernel in comment 34 didn't pick up the change that was supposed to fix this bug's crash... I'll rebuild it on my local machine for you. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1868551 Title: Intel GPU Hangs : random screen freezing w/ Ubuntu 20.04 (Linux 5.4) i915_active_acquire Status in linux package in Ubuntu: Confirmed Bug description: uname -a Linux xps 5.4.0-14-generic #17-Ubuntu SMP Thu Feb 6 22:47:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu Focal Fossa (development branch) Release: 20.04 Codename: focal [ 2556.956079] BUG: kernel NULL pointer dereference, address: 0040 [ 2556.956084] #PF: supervisor read access in kernel mode [ 2556.956084] #PF: error_code(0x) - not-present page [ 2556.956085] PGD 0 P4D 0 [ 2556.956088] Oops: [#1] SMP NOPTI [ 2556.956090] CPU: 2 PID: 1685 Comm: xfwm4 Not tainted 5.4.0-14-generic #17-Ubuntu [ 2556.956092] Hardware name: Dell Inc. XPS 13 7390/0G2D0W, BIOS 1.2.0 10/03/2019 [ 2556.956161] RIP: 0010:i915_active_acquire+0xe/0x80 [i915] [ 2556.956163] Code: 00 48 c7 c6 11 4d 6b c0 e8 af a1 d6 c7 5d c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 <8b> 47 38 48 89 fb 85 c0 74 17 8d 50 01 f0 0f b1 53 38 75 f2 45 31 [ 2556.956164] RSP: 0018:ac17c13279c8 EFLAGS: 00010286 [ 2556.956165] RAX: RBX: 983831d3e480 RCX: [ 2556.956166] RDX: 983783475200 RSI: 983831d3e480 RDI: 0008 [ 2556.956167] RBP: ac17c13279e0 R08: R09: 98382d6b6520 [ 2556.956168] R10: 6cc0 R11: 983838b4db00 R12: 983783475200 [ 2556.956169] R13: 0008 R14: 983783475200 R15: 98382d6b6400 [ 2556.956170] FS: 7f9031c28f00() GS:98383e50() knlGS: [ 2556.956171] CS: 0010 DS: ES: CR0: 80050033 [ 2556.956172] CR2: 0040 CR3: 00046eac6001 CR4: 003606e0 [ 2556.956173] Call Trace: [ 2556.956199] i915_active_ref+0x24/0x200 [i915] [ 2556.956223] i915_vma_move_to_active+0x74/0xf0 [i915] [ 2556.956245] eb_submit+0xff/0x440 [i915] [ 2556.956267] i915_gem_do_execbuffer+0x88e/0xc20 [i915] [ 2556.956271] ? sock_def_readable+0x40/0x70 [ 2556.956274] ? __kmalloc_node+0x205/0x320 [ 2556.956294] i915_gem_execbuffer2_ioctl+0x2c3/0x3d0 [i915] [ 2556.956314] ? i915_gem_execbuffer_ioctl+0x2d0/0x2d0 [i915] [ 2556.956330] drm_ioctl_kernel+0xae/0xf0 [drm] [ 2556.956338] drm_ioctl+0x234/0x3d0 [drm] [ 2556.956358] ? i915_gem_execbuffer_ioctl+0x2d0/0x2d0 [i915] [ 2556.956361] ? vfs_writev+0xc3/0xf0 [ 2556.956363] do_vfs_ioctl+0x407/0x670 [ 2556.956365] ? fput+0x13/0x15 [ 2556.956367] ? __sys_recvmsg+0x88/0xa0 [ 2556.956369] ksys_ioctl+0x67/0x90 [ 2556.956371] __x64_sys_ioctl+0x1a/0x20 [ 2556.956373] do_syscall_64+0x57/0x190 [ 2556.956376] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 2556.956377] RIP: 0033:0x7f9032b3f68b [ 2556.956379] Code: 0f 1e fa 48 8b 05 05 28 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d d5 27 0d 00 f7 d8 64 89 01 48 [ 2556.956380] RSP: 002b:7ffee39a0078 EFLAGS: 0246 ORIG_RAX: 0010 [ 2556.956381] RAX: ffda RBX: 55a8abeb6e48 RCX: 7f9032b3f68b [ 2556.956382] RDX: 7ffee39a0090 RSI: 40406469 RDI: 000d [ 2556.956382] RBP: 7ffee39a0120 R08: 0001 R09: [ 2556.956383] R10: 7ffee39a0140 R11: 0246 R12: 7f9022a4f460 [ 2556.956384] R13: R14: 7ffee39a0090 R15: 000d [ 2556.956385] Modules linked in: ccm rfcomm xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp ip6table_mangle ip6table_nat typec_displayport iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables cmac nfnetlink algif_hash ip6table_filter ip6_tables iptable_filter algif_skcipher af_alg bpfilter bridge stp llc snd_sof_pci snd_sof_intel_hda_common snd_soc_hdac_hda snd_sof_intel_hda snd_sof_intel_byt snd_sof_intel_ipc snd_sof snd_sof_xtensa_dsp snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_hdmi snd_soc_core snd_compress ac97_bus snd_pcm_dmaengine bnep snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_intel_nhlt snd_hda_codec snd_hda_core snd_hwdep snd_pcm nls_iso8859_1 mei_hdcp intel_rapl_msr snd_seq_midi snd_seq_midi_event dell_laptop ledtrig_audio snd_rawmidi x86_pkg_temp_thermal intel_powerclamp coretemp joydev kvm_intel kvm cdc_ether
[Kernel-packages] [Bug 1872984] Re: RTL8822BE network driver rtl_wifi crashes on boot in Focal Fossa 20.04 - 5.4.0-21-generic and mainline 5.7.0-050700rc1-generic
Hi, I have same issue here with same Asus laptop. `kernel: DMI: ASUSTeK COMPUTER INC. VivoBook_ASUSLaptop X430FN_S430FN/X430FN, BIOS X430FN.308 05/28/2019` It seems I have to step back to 19.10. :-( by. sTv -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1872984 Title: RTL8822BE network driver rtl_wifi crashes on boot in Focal Fossa 20.04 - 5.4.0-21-generic and mainline 5.7.0-050700rc1-generic Status in linux package in Ubuntu: Incomplete Bug description: RTL8822BE crashes after rtw_pci starts on boot after kernel update to 5.4.0-21 (fails to read DBI register -- see attached dmesg). Issue is still present on latest mainline kernel version 5.7.0-050700rc1-generic . [ 10.627501] rtw_pci :3a:00.0: start vif 5c:ea:1d:b6:17:11 on port 0 [ 10.714544] [ cut here ] [ 10.714545] failed to read DBI register, addr=0x0719 [ 10.714577] WARNING: CPU: 0 PID: 939 at drivers/net/wireless/realtek/rtw88/pci.c:1156 rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtwpci] [ 10.714577] Modules linked in: (see attached dmesg) [ 10.714614] CPU: 0 PID: 939 Comm: wpa_supplicant Not tainted 5.7.0-050700rc1-generic #202004122032 [ 10.714614] Hardware name: LENOVO 81CU/LNVNB161216, BIOS 7KCN22WW(V1.03) 01/23/2018 [ 10.714616] RIP: 0010:rtw_dbi_read8.constprop.0+0xaa/0xc0 [rtwpci] [ 10.714617] Code: 03 00 00 48 8b 40 50 e8 24 c3 4b e0 5b 41 5c 41 88 45 00 31 c0 41 5d 5d c3 be 19 07 00 00 48 c7 c7 70 73 94 c0 e8 bb de 75 df <0f> 0b b8 fb ff ff ff 5b 41 5c 41 5d 5d c3 0f 1f 84 00 00 00 00 00 [ 10.714618] RSP: 0018:b466007e7880 EFLAGS: 00010282 [ 10.714618] RAX: RBX: RCX: 0007 [ 10.714619] RDX: 0007 RSI: 0092 RDI: 933cc9e19c80 [ 10.714619] RBP: b466007e7898 R08: 03d2 R09: 0004 [ 10.714620] R10: R11: 0001 R12: 933cbdf31ea0 [ 10.714620] R13: b466007e78af R14: 933cbdf35bc8 R15: [ 10.714622] FS: 7fbcedc6efc0() GS:933cc9e0() knlGS: [ 10.714622] CS: 0010 DS: ES: CR0: 80050033 [ 10.714623] CR2: 563278766000 CR3: 0002be7a4002 CR4: 003606f0 [ 10.714623] Call Trace: [ 10.714627] rtw_pci_link_ps+0x4e/0x90 [rtwpci] [ 10.714630] ? _raw_spin_unlock_bh+0x1e/0x20 [ 10.714637] rtw_leave_ips+0x1f/0x80 [rtw88] [ 10.714640] rtw_ops_config+0xa3/0xe0 [rtw88] [ 10.714658] ieee80211_hw_config+0x95/0x390 [mac80211] [ 10.714669] ieee80211_recalc_idle+0x27/0x30 [mac80211] [ 10.714679] __ieee80211_start_scan+0x334/0x750 [mac80211] [ 10.714688] ieee80211_request_scan+0x30/0x50 [mac80211] [ 10.714699] ieee80211_scan+0x5c/0xa0 [mac80211] [ 10.714719] nl80211_trigger_scan+0x59a/0x6c0 [cfg80211] [ 10.714722] genl_rcv_msg+0x1a8/0x470 [ 10.714724] ? ep_poll_callback+0x2a0/0x2c0 [ 10.714725] ? genl_family_rcv_msg_attrs_parse+0x100/0x100 [ 10.714726] netlink_rcv_skb+0x50/0x120 [ 10.714728] genl_rcv+0x29/0x40 [ 10.714729] netlink_unicast+0x1a8/0x250 [ 10.714730] netlink_sendmsg+0x233/0x460 [ 10.714739] ? _copy_from_user+0x31/0x60 [ 10.714750] sock_sendmsg+0x65/0x70 [ 10.714751] sys_sendmsg+0x212/0x280 [ 10.714752] ? copy_msghdr_from_user+0x5c/0x90 [ 10.714755] ? __check_object_size+0x4d/0x150 [ 10.714756] ___sys_sendmsg+0x81/0xc0 [ 10.714757] ? __check_object_size+0x4d/0x150 [ 10.714759] ? unix_ioctl+0x99/0x180 [ 10.714760] ? sock_getsockopt+0x198/0xc04 [ 10.714761] ? sock_do_ioctl+0x47/0x140 [ 10.714763] ? __cgroup_bpf_run_filter_setsockopt+0xae/0x2c0 [ 10.714765] ? _cond_resched+0x19/0x30 [ 10.714767] ? aa_sk_perm+0x43/0x1b0 [ 10.714768] __sys_sendmsg+0x5c/0xa0 [ 10.714770] __x64_sys_sendmsg+0x1f/0x30 [ 10.714772] do_syscall_64+0x57/0x1b0 [ 10.714773] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 10.714774] RIP: 0033:0x7fbcedffb5b7 [ 10.714775] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 10.714776] RSP: 002b:7fff88e22288 EFLAGS: 0246 ORIG_RAX: 002e [ 10.714777] RAX: ffda RBX: 5632787355d0 RCX: 7fbcedffb5b7 [ 10.714777] RDX: RSI: 7fff88e222c0 RDI: 0006 [ 10.714778] RBP: 563278761380 R08: 0004 R09: 563278761380 [ 10.714778] R10: 7fff88e22394 R11: 0246 R12: 5632787354e0 [ 10.714779] R13: 7fff88e222c0 R14: 7fff88e22394 R15: 563278766710 [ 10.714780] ---[ end trace f00c16109236af6f ]--- [ 10.714782] rtw_pci :3a:00.0:
[Kernel-packages] [Bug 1875454] Re: New ubuntu-20.04-preinstalled-server-arm64+raspi.img installed on R-Pi 4 does not boot if usercfg.txt is edited
** Package changed: ubuntu => linux-raspi (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-raspi in Ubuntu. https://bugs.launchpad.net/bugs/1875454 Title: New ubuntu-20.04-preinstalled-server-arm64+raspi.img installed on R-Pi 4 does not boot if usercfg.txt is edited Status in linux-raspi package in Ubuntu: New Bug description: 1. I installed this image on my R-Pi 4: ubuntu-20.04-preinstalled- server-arm64+raspi.img. It booted with no issues including SSH connection. 2. I then edited the boot/firmware/usercfg.txt and added dtoverlay=uart4 to allow access to an alternate UART. This has been working fine for me with 19.10.1 on the same hardware setup. 3. The RPi would not boot and nothing was sent out the serial console. 4. I placed the SD card back in my PC and removed the added line. Boot of the 20.04 image worked again. Release info: ubuntu@ubuntu:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description:Ubuntu 20.04 LTS Release:20.04 Codename: focal Output of serial console with Stock 20.04 image(only password changed at initial boot) MMC: emmc2@7e34: 0, mmcnr@7e30: 1 Loading Environment from FAT... *** Warning - bad CRC, using default environment In:serial Out: serial Err: serial Net: No ethernet found. starting USB... No working controllers found ## Info: input data size = 6 = 0x6 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot.scr 2569 bytes read in 17 ms (147.5 KiB/s) ## Executing script at 0240 8377273 bytes read in 621 ms (12.9 MiB/s) Total of 1 halfword(s) were the same Decompressing kernel... Uncompressed size: 25905664 = 0x18B4A00 29417535 bytes read in 2117 ms (13.3 MiB/s) Booting Ubuntu (with booti) from mmc 0:... ## Flattened Device Tree blob at 0260 Booting using the fdt blob at 0x260 Using Device Tree in place at 0260, end 0260e415 Starting kernel ... [0.940739] bcm2708_fb soc:fb: Unable to determine number of FB's. Assuming 1 [0.941825] raspberrypi-firmware soc:firmware: Request 0x00048003 returned status 0x8001 [0.941850] bcm2708_fb soc:fb: Failed to allocate GPU framebuffer (-22) [0.941898] bcm2708_fb soc:fb: probe failed, err -22 [1.343885] spi-bcm2835 fe204000.spi: could not get clk: -517 ln: /tmp/mountroot-fail-hooks.d//scripts/init-premount/lvm2: No such file or directory ext4 Thu Jan 1 00:00:05 UTC 1970 date: invalid date ' Wed Apr 1 17:23:43 2020' -.mount dev-mqueue.mount sys-kernel-debug.mount sys-kernel-tracing.mount kmod-static-nodes.service systemd-modules-load.service systemd-remount-fs.service ufw.service sys-fs-fuse-connections.mount sys-kernel-config.mount systemd-random-seed.service systemd-sysusers.service systemd-sysctl.service systemd-tmpfiles-setup-dev.service keyboard-setup.service lvm2-monitor.service systemd-udevd.service systemd-journald.service systemd-udev-trigger.service systemd-journal-flush.service [7.989412] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [8.249348] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [8.269839] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04 systemd-rfkill.service systemd-udev-settle.service multipathd.service systemd-fsckd.service snap-core18-1708.mount snap-lxd-14808.mount snap-snapd-7267.mount systemd-fsck@dev-disk-by\x2dlabel-system\x2dboot.service boot-firmware.mount console-setup.service finalrd.service [ OK ] Finished Tell Plymouth To Write Out Runtime Data. [ OK ] Finished Create Volatile Files and Directories. systemd-tmpfiles-setup.service Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. systemd-update-utmp.service apparmor.service [ OK ] Finished Load AppArmor profiles. Starting Load AppArmor pro…managed internally by snapd... [ OK ] Finished Load AppArmor pro…s managed internally by snapd. snapd.apparmor.service [ OK ] Started Network Time Synchronization. systemd-timesyncd.service [ OK ] Reached target System Time Set. [ OK ] Reached target System Time Synchronized. [ 11.747964] cloud-init[1151]: Cloud-init v. 20.1-10-g71af48df-0ubuntu5 running 'init-local' at Sun, 26 Apr 2020 21:59:25 +. Up 11.30 seconds. [ OK ] Finished Initial cloud-init job (pre-networking). cloud-init-local.service [ OK ] Reached target Network (Pre). Starting Network Service...
[Kernel-packages] [Bug 1875486] Re: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine.
This issue occurred at around 4:34 PM, EDT, on April 27, 2020. ** Attachment added: "Kernel Log" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875486/+attachment/5362010/+files/kern.log -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: New Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570
[Kernel-packages] [Bug 1875454] [NEW] New ubuntu-20.04-preinstalled-server-arm64+raspi.img installed on R-Pi 4 does not boot if usercfg.txt is edited
You have been subscribed to a public bug: 1. I installed this image on my R-Pi 4: ubuntu-20.04-preinstalled- server-arm64+raspi.img. It booted with no issues including SSH connection. 2. I then edited the boot/firmware/usercfg.txt and added dtoverlay=uart4 to allow access to an alternate UART. This has been working fine for me with 19.10.1 on the same hardware setup. 3. The RPi would not boot and nothing was sent out the serial console. 4. I placed the SD card back in my PC and removed the added line. Boot of the 20.04 image worked again. Release info: ubuntu@ubuntu:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description:Ubuntu 20.04 LTS Release:20.04 Codename: focal Output of serial console with Stock 20.04 image(only password changed at initial boot) MMC: emmc2@7e34: 0, mmcnr@7e30: 1 Loading Environment from FAT... *** Warning - bad CRC, using default environment In:serial Out: serial Err: serial Net: No ethernet found. starting USB... No working controllers found ## Info: input data size = 6 = 0x6 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot.scr 2569 bytes read in 17 ms (147.5 KiB/s) ## Executing script at 0240 8377273 bytes read in 621 ms (12.9 MiB/s) Total of 1 halfword(s) were the same Decompressing kernel... Uncompressed size: 25905664 = 0x18B4A00 29417535 bytes read in 2117 ms (13.3 MiB/s) Booting Ubuntu (with booti) from mmc 0:... ## Flattened Device Tree blob at 0260 Booting using the fdt blob at 0x260 Using Device Tree in place at 0260, end 0260e415 Starting kernel ... [0.940739] bcm2708_fb soc:fb: Unable to determine number of FB's. Assuming 1 [0.941825] raspberrypi-firmware soc:firmware: Request 0x00048003 returned status 0x8001 [0.941850] bcm2708_fb soc:fb: Failed to allocate GPU framebuffer (-22) [0.941898] bcm2708_fb soc:fb: probe failed, err -22 [1.343885] spi-bcm2835 fe204000.spi: could not get clk: -517 ln: /tmp/mountroot-fail-hooks.d//scripts/init-premount/lvm2: No such file or directory ext4 Thu Jan 1 00:00:05 UTC 1970 date: invalid date ' Wed Apr 1 17:23:43 2020' -.mount dev-mqueue.mount sys-kernel-debug.mount sys-kernel-tracing.mount kmod-static-nodes.service systemd-modules-load.service systemd-remount-fs.service ufw.service sys-fs-fuse-connections.mount sys-kernel-config.mount systemd-random-seed.service systemd-sysusers.service systemd-sysctl.service systemd-tmpfiles-setup-dev.service keyboard-setup.service lvm2-monitor.service systemd-udevd.service systemd-journald.service systemd-udev-trigger.service systemd-journal-flush.service [7.989412] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [8.249348] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [8.269839] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04 systemd-rfkill.service systemd-udev-settle.service multipathd.service systemd-fsckd.service snap-core18-1708.mount snap-lxd-14808.mount snap-snapd-7267.mount systemd-fsck@dev-disk-by\x2dlabel-system\x2dboot.service boot-firmware.mount console-setup.service finalrd.service [ OK ] Finished Tell Plymouth To Write Out Runtime Data. [ OK ] Finished Create Volatile Files and Directories. systemd-tmpfiles-setup.service Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. systemd-update-utmp.service apparmor.service [ OK ] Finished Load AppArmor profiles. Starting Load AppArmor pro…managed internally by snapd... [ OK ] Finished Load AppArmor pro…s managed internally by snapd. snapd.apparmor.service [ OK ] Started Network Time Synchronization. systemd-timesyncd.service [ OK ] Reached target System Time Set. [ OK ] Reached target System Time Synchronized. [ 11.747964] cloud-init[1151]: Cloud-init v. 20.1-10-g71af48df-0ubuntu5 running 'init-local' at Sun, 26 Apr 2020 21:59:25 +. Up 11.30 seconds. [ OK ] Finished Initial cloud-init job (pre-networking). cloud-init-local.service [ OK ] Reached target Network (Pre). Starting Network Service... systemd-networkd.service [ OK ] Started Network Service. Starting Wait for Network to be Configured... Starting Network Name Resolution... [ OK ] Finished Wait for Network to be Configured. systemd-networkd-wait-online.service Starting Initial cloud-ini… (metadata service crawler)... [ OK ] Started Network Name Resolution. systemd-resolved.service [ OK ] Reached target Host and Network Name Lookups. [ 13.857611] cloud-init[1172]: Cloud-init v. 20.1-10-g71af48df-0ubuntu5 running 'init' at Sun, 26 Apr 2020 21:59:27 +. Up 13.44 seconds. [ 13.857972]
[Kernel-packages] [Bug 1875486] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1875486/+attachment/5361993/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: New Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc.
[Kernel-packages] [Bug 1875486] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1875486/+attachment/5361992/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: New Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc.
[Kernel-packages] [Bug 1875486] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1875486/+attachment/5361991/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: New Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc.
[Kernel-packages] [Bug 1875486] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1875486/+attachment/5361994/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: New Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc.
[Kernel-packages] [Bug 1875486] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1875486/+attachment/5361989/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: New Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc.
[Kernel-packages] [Bug 1875486] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1875486/+attachment/5361990/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: New Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc.
[Kernel-packages] [Bug 1875486] modified.conffile..etc.apport.crashdb.conf.txt
apport information ** Attachment added: "modified.conffile..etc.apport.crashdb.conf.txt" https://bugs.launchpad.net/bugs/1875486/+attachment/5361995/+files/modified.conffile..etc.apport.crashdb.conf.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: New Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570
[Kernel-packages] [Bug 1875486] Lspci-vt.txt
apport information ** Attachment added: "Lspci-vt.txt" https://bugs.launchpad.net/bugs/1875486/+attachment/5361985/+files/Lspci-vt.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: New Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc.
[Kernel-packages] [Bug 1875486] Lsusb-t.txt
apport information ** Attachment added: "Lsusb-t.txt" https://bugs.launchpad.net/bugs/1875486/+attachment/5361986/+files/Lsusb-t.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: New Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc.
[Kernel-packages] [Bug 1875486] AlsaInfo.txt
apport information ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1875486/+attachment/5361980/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: New Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc.
[Kernel-packages] [Bug 1875486] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1875486/+attachment/5361984/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: New Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc.
[Kernel-packages] [Bug 1875486] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1875486/+attachment/5361983/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: New Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc.
[Kernel-packages] [Bug 1875486] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1875486/+attachment/5361988/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: New Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc.
[Kernel-packages] [Bug 1875486] Lsusb-v.txt
apport information ** Attachment added: "Lsusb-v.txt" https://bugs.launchpad.net/bugs/1875486/+attachment/5361987/+files/Lsusb-v.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: New Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc.
[Kernel-packages] [Bug 1875486] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1875486/+attachment/5361981/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: New Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc.
[Kernel-packages] [Bug 1875486] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1875486/+attachment/5361982/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875486 Title: Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine. Status in linux package in Ubuntu: New Bug description: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc.
[Kernel-packages] [Bug 1875486] [NEW] Entire system freezes when Chrome freezes when I try to quit the app by clicking on the X button, resulting in an unresponsive machine.
Public bug reported: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip Date: Mon Apr 27 16:27:20 2020 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: seija 1466 F pulseaudio CasperMD5CheckResult: skip DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-26 (1 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 0cf3:e009 Qualcomm Atheros Communications Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 0c45:6a06 Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Inspiron 5570 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=d6d3e13f-ad59-49e9-a5c7-055147c9065b ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/15/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.2.3 dmi.board.name: 09YTN7 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.2.3:bd05/15/2019:svnDellInc.:pnInspiron5570:pvr:rvnDellInc.:rn09YTN7:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Inspiron dmi.product.name: Inspiron 5570 dmi.product.sku: 0810 dmi.sys.vendor: Dell Inc. mtime.conffile..etc.apport.crashdb.conf: 2020-04-27T10:14:04.511031 ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug apport-collected focal ** Tags added: apport-collected ** Description changed: I had to hit Control+Alt+F1 for the screen to turn black because GNOME would not respond either, and then the ttyl screen disappeared and I was put back in the login screen. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USER
[Kernel-packages] [Bug 1868551] Re: Intel GPU Hangs : random screen freezing w/ Ubuntu 20.04 (Linux 5.4) i915_active_acquire
@leozinho29-eu Wow, that's really unexpected! I'll take a look. Thanks for the log and quick reply. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1868551 Title: Intel GPU Hangs : random screen freezing w/ Ubuntu 20.04 (Linux 5.4) i915_active_acquire Status in linux package in Ubuntu: Confirmed Bug description: uname -a Linux xps 5.4.0-14-generic #17-Ubuntu SMP Thu Feb 6 22:47:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu Focal Fossa (development branch) Release: 20.04 Codename: focal [ 2556.956079] BUG: kernel NULL pointer dereference, address: 0040 [ 2556.956084] #PF: supervisor read access in kernel mode [ 2556.956084] #PF: error_code(0x) - not-present page [ 2556.956085] PGD 0 P4D 0 [ 2556.956088] Oops: [#1] SMP NOPTI [ 2556.956090] CPU: 2 PID: 1685 Comm: xfwm4 Not tainted 5.4.0-14-generic #17-Ubuntu [ 2556.956092] Hardware name: Dell Inc. XPS 13 7390/0G2D0W, BIOS 1.2.0 10/03/2019 [ 2556.956161] RIP: 0010:i915_active_acquire+0xe/0x80 [i915] [ 2556.956163] Code: 00 48 c7 c6 11 4d 6b c0 e8 af a1 d6 c7 5d c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 <8b> 47 38 48 89 fb 85 c0 74 17 8d 50 01 f0 0f b1 53 38 75 f2 45 31 [ 2556.956164] RSP: 0018:ac17c13279c8 EFLAGS: 00010286 [ 2556.956165] RAX: RBX: 983831d3e480 RCX: [ 2556.956166] RDX: 983783475200 RSI: 983831d3e480 RDI: 0008 [ 2556.956167] RBP: ac17c13279e0 R08: R09: 98382d6b6520 [ 2556.956168] R10: 6cc0 R11: 983838b4db00 R12: 983783475200 [ 2556.956169] R13: 0008 R14: 983783475200 R15: 98382d6b6400 [ 2556.956170] FS: 7f9031c28f00() GS:98383e50() knlGS: [ 2556.956171] CS: 0010 DS: ES: CR0: 80050033 [ 2556.956172] CR2: 0040 CR3: 00046eac6001 CR4: 003606e0 [ 2556.956173] Call Trace: [ 2556.956199] i915_active_ref+0x24/0x200 [i915] [ 2556.956223] i915_vma_move_to_active+0x74/0xf0 [i915] [ 2556.956245] eb_submit+0xff/0x440 [i915] [ 2556.956267] i915_gem_do_execbuffer+0x88e/0xc20 [i915] [ 2556.956271] ? sock_def_readable+0x40/0x70 [ 2556.956274] ? __kmalloc_node+0x205/0x320 [ 2556.956294] i915_gem_execbuffer2_ioctl+0x2c3/0x3d0 [i915] [ 2556.956314] ? i915_gem_execbuffer_ioctl+0x2d0/0x2d0 [i915] [ 2556.956330] drm_ioctl_kernel+0xae/0xf0 [drm] [ 2556.956338] drm_ioctl+0x234/0x3d0 [drm] [ 2556.956358] ? i915_gem_execbuffer_ioctl+0x2d0/0x2d0 [i915] [ 2556.956361] ? vfs_writev+0xc3/0xf0 [ 2556.956363] do_vfs_ioctl+0x407/0x670 [ 2556.956365] ? fput+0x13/0x15 [ 2556.956367] ? __sys_recvmsg+0x88/0xa0 [ 2556.956369] ksys_ioctl+0x67/0x90 [ 2556.956371] __x64_sys_ioctl+0x1a/0x20 [ 2556.956373] do_syscall_64+0x57/0x190 [ 2556.956376] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 2556.956377] RIP: 0033:0x7f9032b3f68b [ 2556.956379] Code: 0f 1e fa 48 8b 05 05 28 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d d5 27 0d 00 f7 d8 64 89 01 48 [ 2556.956380] RSP: 002b:7ffee39a0078 EFLAGS: 0246 ORIG_RAX: 0010 [ 2556.956381] RAX: ffda RBX: 55a8abeb6e48 RCX: 7f9032b3f68b [ 2556.956382] RDX: 7ffee39a0090 RSI: 40406469 RDI: 000d [ 2556.956382] RBP: 7ffee39a0120 R08: 0001 R09: [ 2556.956383] R10: 7ffee39a0140 R11: 0246 R12: 7f9022a4f460 [ 2556.956384] R13: R14: 7ffee39a0090 R15: 000d [ 2556.956385] Modules linked in: ccm rfcomm xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp ip6table_mangle ip6table_nat typec_displayport iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables cmac nfnetlink algif_hash ip6table_filter ip6_tables iptable_filter algif_skcipher af_alg bpfilter bridge stp llc snd_sof_pci snd_sof_intel_hda_common snd_soc_hdac_hda snd_sof_intel_hda snd_sof_intel_byt snd_sof_intel_ipc snd_sof snd_sof_xtensa_dsp snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_hdmi snd_soc_core snd_compress ac97_bus snd_pcm_dmaengine bnep snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_intel_nhlt snd_hda_codec snd_hda_core snd_hwdep snd_pcm nls_iso8859_1 mei_hdcp intel_rapl_msr snd_seq_midi snd_seq_midi_event dell_laptop ledtrig_audio snd_rawmidi x86_pkg_temp_thermal intel_powerclamp coretemp joydev kvm_intel kvm cdc_ether intel_cstate intel_rapl_perf snd_seq usbnet serio_raw iwlmvm r8152 [ 2556.956409] wmi_bmof mii mac80211
[Kernel-packages] [Bug 1873506] Re: ubuntu/focal64 fails to mount Vagrant shared folders
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1873506 Title: ubuntu/focal64 fails to mount Vagrant shared folders Status in cloud-images: Confirmed Status in linux package in Ubuntu: In Progress Status in linux source package in Eoan: New Status in linux source package in Focal: New Bug description: Attempting to `vagrant up` using the `ubuntu/focal64` box fails to mount the `/vagrant` shared folder. `ubuntu/bionic64` works as expected. Here is the Vagrant error message: Vagrant was unable to mount VirtualBox shared folders. This is usually because the filesystem "vboxsf" is not available. This filesystem is made available via the VirtualBox Guest Additions and kernel module. Please verify that these guest additions are properly installed in the guest. This is not a bug in Vagrant and is usually caused by a faulty Vagrant box. For context, the command attempted was: mount -t vboxsf -o uid=1000,gid=1000 vagrant /vagrant The error output from the command was: : No such device To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-images/+bug/1873506/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1873506] Re: ubuntu/focal64 fails to mount Vagrant shared folders
** Project changed: linux => linux (Ubuntu) ** Changed in: linux (Ubuntu) Status: New => Confirmed ** Changed in: linux (Ubuntu) Importance: Undecided => High ** Changed in: linux (Ubuntu) Status: Confirmed => In Progress ** Changed in: linux (Ubuntu) Assignee: (unassigned) => Seth Forshee (sforshee) ** Also affects: linux (Ubuntu Eoan) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Focal) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1873506 Title: ubuntu/focal64 fails to mount Vagrant shared folders Status in cloud-images: Confirmed Status in linux package in Ubuntu: In Progress Status in linux source package in Eoan: New Status in linux source package in Focal: New Bug description: Attempting to `vagrant up` using the `ubuntu/focal64` box fails to mount the `/vagrant` shared folder. `ubuntu/bionic64` works as expected. Here is the Vagrant error message: Vagrant was unable to mount VirtualBox shared folders. This is usually because the filesystem "vboxsf" is not available. This filesystem is made available via the VirtualBox Guest Additions and kernel module. Please verify that these guest additions are properly installed in the guest. This is not a bug in Vagrant and is usually caused by a faulty Vagrant box. For context, the command attempted was: mount -t vboxsf -o uid=1000,gid=1000 vagrant /vagrant The error output from the command was: : No such device To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-images/+bug/1873506/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1873506] [NEW] ubuntu/focal64 fails to mount Vagrant shared folders
You have been subscribed to a public bug: Attempting to `vagrant up` using the `ubuntu/focal64` box fails to mount the `/vagrant` shared folder. `ubuntu/bionic64` works as expected. Here is the Vagrant error message: Vagrant was unable to mount VirtualBox shared folders. This is usually because the filesystem "vboxsf" is not available. This filesystem is made available via the VirtualBox Guest Additions and kernel module. Please verify that these guest additions are properly installed in the guest. This is not a bug in Vagrant and is usually caused by a faulty Vagrant box. For context, the command attempted was: mount -t vboxsf -o uid=1000,gid=1000 vagrant /vagrant The error output from the command was: : No such device ** Affects: cloud-images Importance: Undecided Status: Confirmed ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: id-5ea2fffbe0f69035134ff94f -- ubuntu/focal64 fails to mount Vagrant shared folders https://bugs.launchpad.net/bugs/1873506 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1868551] Re: Intel GPU Hangs : random screen freezing w/ Ubuntu 20.04 (Linux 5.4) i915_active_acquire
Setting that option made my computer crash again. It crashed after 8 minutes of usage. ** Attachment added: "Syslog" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1868551/+attachment/5361909/+files/logtt.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1868551 Title: Intel GPU Hangs : random screen freezing w/ Ubuntu 20.04 (Linux 5.4) i915_active_acquire Status in linux package in Ubuntu: Confirmed Bug description: uname -a Linux xps 5.4.0-14-generic #17-Ubuntu SMP Thu Feb 6 22:47:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu Focal Fossa (development branch) Release: 20.04 Codename: focal [ 2556.956079] BUG: kernel NULL pointer dereference, address: 0040 [ 2556.956084] #PF: supervisor read access in kernel mode [ 2556.956084] #PF: error_code(0x) - not-present page [ 2556.956085] PGD 0 P4D 0 [ 2556.956088] Oops: [#1] SMP NOPTI [ 2556.956090] CPU: 2 PID: 1685 Comm: xfwm4 Not tainted 5.4.0-14-generic #17-Ubuntu [ 2556.956092] Hardware name: Dell Inc. XPS 13 7390/0G2D0W, BIOS 1.2.0 10/03/2019 [ 2556.956161] RIP: 0010:i915_active_acquire+0xe/0x80 [i915] [ 2556.956163] Code: 00 48 c7 c6 11 4d 6b c0 e8 af a1 d6 c7 5d c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 <8b> 47 38 48 89 fb 85 c0 74 17 8d 50 01 f0 0f b1 53 38 75 f2 45 31 [ 2556.956164] RSP: 0018:ac17c13279c8 EFLAGS: 00010286 [ 2556.956165] RAX: RBX: 983831d3e480 RCX: [ 2556.956166] RDX: 983783475200 RSI: 983831d3e480 RDI: 0008 [ 2556.956167] RBP: ac17c13279e0 R08: R09: 98382d6b6520 [ 2556.956168] R10: 6cc0 R11: 983838b4db00 R12: 983783475200 [ 2556.956169] R13: 0008 R14: 983783475200 R15: 98382d6b6400 [ 2556.956170] FS: 7f9031c28f00() GS:98383e50() knlGS: [ 2556.956171] CS: 0010 DS: ES: CR0: 80050033 [ 2556.956172] CR2: 0040 CR3: 00046eac6001 CR4: 003606e0 [ 2556.956173] Call Trace: [ 2556.956199] i915_active_ref+0x24/0x200 [i915] [ 2556.956223] i915_vma_move_to_active+0x74/0xf0 [i915] [ 2556.956245] eb_submit+0xff/0x440 [i915] [ 2556.956267] i915_gem_do_execbuffer+0x88e/0xc20 [i915] [ 2556.956271] ? sock_def_readable+0x40/0x70 [ 2556.956274] ? __kmalloc_node+0x205/0x320 [ 2556.956294] i915_gem_execbuffer2_ioctl+0x2c3/0x3d0 [i915] [ 2556.956314] ? i915_gem_execbuffer_ioctl+0x2d0/0x2d0 [i915] [ 2556.956330] drm_ioctl_kernel+0xae/0xf0 [drm] [ 2556.956338] drm_ioctl+0x234/0x3d0 [drm] [ 2556.956358] ? i915_gem_execbuffer_ioctl+0x2d0/0x2d0 [i915] [ 2556.956361] ? vfs_writev+0xc3/0xf0 [ 2556.956363] do_vfs_ioctl+0x407/0x670 [ 2556.956365] ? fput+0x13/0x15 [ 2556.956367] ? __sys_recvmsg+0x88/0xa0 [ 2556.956369] ksys_ioctl+0x67/0x90 [ 2556.956371] __x64_sys_ioctl+0x1a/0x20 [ 2556.956373] do_syscall_64+0x57/0x190 [ 2556.956376] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 2556.956377] RIP: 0033:0x7f9032b3f68b [ 2556.956379] Code: 0f 1e fa 48 8b 05 05 28 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d d5 27 0d 00 f7 d8 64 89 01 48 [ 2556.956380] RSP: 002b:7ffee39a0078 EFLAGS: 0246 ORIG_RAX: 0010 [ 2556.956381] RAX: ffda RBX: 55a8abeb6e48 RCX: 7f9032b3f68b [ 2556.956382] RDX: 7ffee39a0090 RSI: 40406469 RDI: 000d [ 2556.956382] RBP: 7ffee39a0120 R08: 0001 R09: [ 2556.956383] R10: 7ffee39a0140 R11: 0246 R12: 7f9022a4f460 [ 2556.956384] R13: R14: 7ffee39a0090 R15: 000d [ 2556.956385] Modules linked in: ccm rfcomm xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp ip6table_mangle ip6table_nat typec_displayport iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables cmac nfnetlink algif_hash ip6table_filter ip6_tables iptable_filter algif_skcipher af_alg bpfilter bridge stp llc snd_sof_pci snd_sof_intel_hda_common snd_soc_hdac_hda snd_sof_intel_hda snd_sof_intel_byt snd_sof_intel_ipc snd_sof snd_sof_xtensa_dsp snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_hdmi snd_soc_core snd_compress ac97_bus snd_pcm_dmaengine bnep snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_intel_nhlt snd_hda_codec snd_hda_core snd_hwdep snd_pcm nls_iso8859_1 mei_hdcp intel_rapl_msr snd_seq_midi snd_seq_midi_event dell_laptop ledtrig_audio snd_rawmidi x86_pkg_temp_thermal intel_powerclamp coretemp joydev kvm_intel
[Kernel-packages] [Bug 1776654] Re: systemd upstream sysusers tests fails
Hello Thadeu, or anyone else affected, Accepted systemd into bionic-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/systemd/237-3ubuntu10.40 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed. Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, what testing has been performed on the package and change the tag from verification-needed- bionic to verification-done-bionic. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification- failed-bionic. In either case, without details of your testing we will not be able to proceed. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance for helping! N.B. The updated package will be released to -updates after the bug(s) fixed by this package have been verified and the package has been in -proposed for a minimum of 7 days. ** Changed in: systemd (Ubuntu Bionic) Status: In Progress => Fix Committed ** Tags added: verification-needed-bionic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1776654 Title: systemd upstream sysusers tests fails Status in linux package in Ubuntu: Invalid Status in systemd package in Ubuntu: Fix Committed Status in linux source package in Bionic: Invalid Status in systemd source package in Bionic: Fix Committed Status in linux source package in Cosmic: Invalid Status in linux source package in Eoan: Invalid Status in systemd source package in Eoan: Fix Committed Status in linux source package in Focal: Invalid Status in systemd source package in Focal: Fix Committed Bug description: [impact] TEST-21-SYSUSERS autopkgtest fails [test case] see original description [regression potential] any regression would be limited to incorrect pass/fail of TEST-21-SYSUSERS [scope] TEST-21-SYSUSERS does not exist in Xenial, it is first contained in Bionic. This is needed for B, E, and F. [original description] https://objectstorage.prodstack4-5.canonical.com/v1/AUTH_77e2ada1e7a84929a74ba3b87153c0ac /autopkgtest-cosmic-canonical-kernel-team- bootstrap/cosmic/amd64/s/systemd/20180613_003352_38c07@/log.gz == TEST-21-SYSUSERS == make: Entering directory '/tmp/autopkgtest.phv1ss/build.sqb/src/test/TEST-21-SYSUSERS' TEST CLEANUP: Sysuser-related tests TEST SETUP: Sysuser-related tests TEST RUN: Sysuser-related tests *** Running test-1.input *** Running test-2.input *** Running test-3.input *** Running test-4.input *** Running test unhappy-1.input --- /var/tmp/systemd-test.TjNA7s/tmp/err 2018-06-13 00:22:12.805061468 + +++ unhappy-1.expected-err2018-01-28 15:58:17.0 + @@ -1 +1 @@ -Creating user xxx (n/a) with uid 312 and gid 310. +Failed to parse UID: '99': Numerical result out of range Unexpected error output for unhappy-1.input Creating user xxx (n/a) with uid 312 and gid 310. make: *** [run] Error 1 Makefile:4: recipe for target 'run' failed make: Leaving directory '/tmp/autopkgtest.phv1ss/build.sqb/src/test/TEST-21-SYSUSERS' FAILED TESTS: test/TEST-21-SYSUSERS autopkgtest [00:22:13]: test upstream: ---] upstream FAIL non-zero exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776654/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875236] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361896/+files/PulseList.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) MachineType: Acer Swift SF514-54T Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2019 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Yebisu_IL dmi.board.vendor: IL dmi.board.version: V1.13 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.family: Swift 5 dmi.product.name: Swift SF514-54T dmi.product.sku: dmi.product.version: V1.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1874057] Re: [UBUNTU 20.04] s390x/pci: do not allow to create more pci functions than configured via CONFIG_PCI_NR_FUNCTIONS
Kernel SRU request submitted:
https://lists.ubuntu.com/archives/kernel-team/2020-April/thread.html#109402
Changing status to 'In Progress'.
** Description changed:
+ SRU Justification:
+ ==
+
+ [Impact]
+
+ * PCI Functions with UIDs >128 are currently not accounted correctly in
+ the s390x/pci (zPCI) code.
+
+ * Furthermore, the code allows that more than CONFIG_PCI_NR_FUNCTIONS
+ are created.
+
+ * This can lead to issues with data structures which were only allocated
+ for CONFIG_PCI_NR_FUNCTIONS.
+
+ [Fix]
+
+ *
+
https://bugs.launchpad.net/ubuntu-z-systems/+bug/1874057/+attachment/5357850/+files/0001-s390
+ -pci-Fix-zpci_alloc_domain-over-allocation-for-focal.patch
+
+ [Test Case]
+
+ * Set the kernel parameter CONFIG_PCI_NR_FUNCTIONS to a specific
+ (reasonablly low) number.
+
+ * And check if more PCI functions can be created than specified by
+ CONFIG_PCI_NR_FUNCTIONS (e.g. using a RoCE adapter) and watch for kernel
+ message 'Adding PCI function ... failed'
+
+
+ [Regression Potential]
+
+ * There is regression potential can be considered as low, since:
+
+ * the zPCI cards are less wide spread than for example ccw adapters on
+ s390x
+
+ * the fix got already upstream accepted in 5.7, hence upstream reviewed,
+ too
+
+ * the modifications span just two files and both are s390x arch specific
+
+ [Other Info]
+
+ * the above patch-file is based on commit
+ 969ae01bab2fe938b4c8324836038b5ac1c78fac ("s390/pci: Fix
+ zpci_alloc_domain() over allocation"), but this backport was needed for
+ getting this applied to focal master-next
+
+ * and this patch got upstream accepted with kernel v5.7-rc1, hence on
+ the long term it should be in 'gorilla'
+
+ __
+
PCI Functions with UIDs >128 are currently not accounted correctly in
the s390x/pci code. Furthermore, the code allows that more than
CONFIG_PCI_NR_FUNCTIONS are created. This can lead to issues with data
structures which were only allocated for CONFIG_PCI_NR_FUNCTIONS.
This has been fixed in the following upstream commit:
969ae01bab2fe938b4c8324836038b5ac1c78fac
("s390/pci: Fix zpci_alloc_domain() over allocation")
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1874057
Title:
[UBUNTU 20.04] s390x/pci: do not allow to create more pci functions
than configured via CONFIG_PCI_NR_FUNCTIONS
Status in Ubuntu on IBM z Systems:
Triaged
Status in linux package in Ubuntu:
New
Bug description:
SRU Justification:
==
[Impact]
* PCI Functions with UIDs >128 are currently not accounted correctly
in the s390x/pci (zPCI) code.
* Furthermore, the code allows that more than CONFIG_PCI_NR_FUNCTIONS
are created.
* This can lead to issues with data structures which were only
allocated for CONFIG_PCI_NR_FUNCTIONS.
[Fix]
*
https://bugs.launchpad.net/ubuntu-z-systems/+bug/1874057/+attachment/5357850/+files/0001-s390
-pci-Fix-zpci_alloc_domain-over-allocation-for-focal.patch
[Test Case]
* Set the kernel parameter CONFIG_PCI_NR_FUNCTIONS to a specific
(reasonablly low) number.
* And check if more PCI functions can be created than specified by
CONFIG_PCI_NR_FUNCTIONS (e.g. using a RoCE adapter) and watch for
kernel message 'Adding PCI function ... failed'
[Regression Potential]
* There is regression potential can be considered as low, since:
* the zPCI cards are less wide spread than for example ccw adapters on
s390x
* the fix got already upstream accepted in 5.7, hence upstream
reviewed, too
* the modifications span just two files and both are s390x arch
specific
[Other Info]
* the above patch-file is based on commit
969ae01bab2fe938b4c8324836038b5ac1c78fac ("s390/pci: Fix
zpci_alloc_domain() over allocation"), but this backport was needed
for getting this applied to focal master-next
* and this patch got upstream accepted with kernel v5.7-rc1, hence on
the long term it should be in 'gorilla'
__
PCI Functions with UIDs >128 are currently not accounted correctly in
the s390x/pci code. Furthermore, the code allows that more than
CONFIG_PCI_NR_FUNCTIONS are created. This can lead to issues with data
structures which were only allocated for CONFIG_PCI_NR_FUNCTIONS.
This has been fixed in the following upstream commit:
969ae01bab2fe938b4c8324836038b5ac1c78fac
("s390/pci: Fix zpci_alloc_domain() over allocation")
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-z-systems/+bug/1874057/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875236] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361895/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) MachineType: Acer Swift SF514-54T Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2019 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Yebisu_IL dmi.board.vendor: IL dmi.board.version: V1.13 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.family: Swift 5 dmi.product.name: Swift SF514-54T dmi.product.sku: dmi.product.version: V1.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875236] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361897/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) MachineType: Acer Swift SF514-54T Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2019 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Yebisu_IL dmi.board.vendor: IL dmi.board.version: V1.13 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.family: Swift 5 dmi.product.name: Swift SF514-54T dmi.product.sku: dmi.product.version: V1.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875236] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361894/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) MachineType: Acer Swift SF514-54T Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2019 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Yebisu_IL dmi.board.vendor: IL dmi.board.version: V1.13 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.family: Swift 5 dmi.product.name: Swift SF514-54T dmi.product.sku: dmi.product.version: V1.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875236] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361893/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) MachineType: Acer Swift SF514-54T Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2019 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Yebisu_IL dmi.board.vendor: IL dmi.board.version: V1.13 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.family: Swift 5 dmi.product.name: Swift SF514-54T dmi.product.sku: dmi.product.version: V1.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875236] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361898/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) MachineType: Acer Swift SF514-54T Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2019 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Yebisu_IL dmi.board.vendor: IL dmi.board.version: V1.13 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.family: Swift 5 dmi.product.name: Swift SF514-54T dmi.product.sku: dmi.product.version: V1.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875236] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361899/+files/WifiSyslog.txt ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) MachineType: Acer Swift SF514-54T Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2019 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Yebisu_IL dmi.board.vendor: IL dmi.board.version: V1.13 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.family: Swift 5 dmi.product.name: Swift SF514-54T dmi.product.sku: dmi.product.version: V1.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875236] Lspci-vt.txt
apport information ** Attachment added: "Lspci-vt.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361887/+files/Lspci-vt.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) MachineType: Acer Swift SF514-54T Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2019 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Yebisu_IL dmi.board.vendor: IL dmi.board.version: V1.13 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.family: Swift 5 dmi.product.name: Swift SF514-54T dmi.product.sku: dmi.product.version: V1.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875236] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361892/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) MachineType: Acer Swift SF514-54T Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2019 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Yebisu_IL dmi.board.vendor: IL dmi.board.version: V1.13 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.family: Swift 5 dmi.product.name: Swift SF514-54T dmi.product.sku: dmi.product.version: V1.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875469] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875469 Title: Touch pad unresponsive Status in linux package in Ubuntu: Confirmed Bug description: I have purchased a Lenovo Ideapad 7 Slim 15 with lenovo model number 82AD0001US and the touch pad does not work, nor does the clicking. It doesn't appear to be registering as a device. I have checked with the windows installation that the physical device does work. This with the install of Ubuntu 20.04 LTS. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Mon Apr 27 14:38:12 2020 InstallationDate: Installed on 2020-04-27 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: LENOVO 82AD ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=c19850db-e248-4f97-b75b-c5dc6e03ba33 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/30/2019 dmi.bios.vendor: LENOVO dmi.bios.version: DHCN19WW dmi.board.asset.tag: ��� dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0J40709 WIN dmi.chassis.asset.tag: ��� dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: IdeaPad Slim 7 15IIL05 dmi.modalias: dmi:bvnLENOVO:bvrDHCN19WW:bd12/30/2019:svnLENOVO:pn82AD:pvrIdeaPadSlim715IIL05:rvnLENOVO:rnLNVNB161216:rvrSDK0J40709WIN:cvnLENOVO:ct10:cvrIdeaPadSlim715IIL05: dmi.product.family: IdeaPad Slim 7 15IIL05 dmi.product.name: 82AD dmi.product.sku: LENOVO_MT_82AD_BU_idea_FM_IdeaPad Slim 7 15IIL05 dmi.product.version: IdeaPad Slim 7 15IIL05 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875469/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875236] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361885/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) MachineType: Acer Swift SF514-54T Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2019 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Yebisu_IL dmi.board.vendor: IL dmi.board.version: V1.13 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.family: Swift 5 dmi.product.name: Swift SF514-54T dmi.product.sku: dmi.product.version: V1.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875236] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361891/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) MachineType: Acer Swift SF514-54T Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2019 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Yebisu_IL dmi.board.vendor: IL dmi.board.version: V1.13 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.family: Swift 5 dmi.product.name: Swift SF514-54T dmi.product.sku: dmi.product.version: V1.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875236] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361886/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) MachineType: Acer Swift SF514-54T Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2019 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Yebisu_IL dmi.board.vendor: IL dmi.board.version: V1.13 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.family: Swift 5 dmi.product.name: Swift SF514-54T dmi.product.sku: dmi.product.version: V1.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875236] Lsusb-v.txt
apport information ** Attachment added: "Lsusb-v.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361890/+files/Lsusb-v.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) MachineType: Acer Swift SF514-54T Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2019 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Yebisu_IL dmi.board.vendor: IL dmi.board.version: V1.13 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.family: Swift 5 dmi.product.name: Swift SF514-54T dmi.product.sku: dmi.product.version: V1.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875236] Re: Different kernel gives different RAM results
apport information ** Tags added: apport-collected ** Description changed: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 + + --- + ProblemType: Bug + ApportVersion: 2.20.11-0ubuntu27 + Architecture: amd64 + AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: + CasperMD5CheckResult: skip + CurrentDesktop: ubuntu:GNOME + DistroRelease: Ubuntu 20.04 + InstallationDate: Installed on 2020-04-18 (9 days ago) + InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) + MachineType: Acer Swift SF514-54T + Package: linux (not installed) + ProcFB: 0 i915drmfb + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 + ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 + RelatedPackageVersions: + linux-restricted-modules-5.4.0-26-generic N/A + linux-backports-modules-5.4.0-26-generic N/A + linux-firmware1.187 + Tags: focal + Uname: Linux 5.4.0-26-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo + _MarkForUpload: True + dmi.bios.date: 12/19/2019 + dmi.bios.vendor: Insyde Corp. + dmi.bios.version: V1.13 + dmi.board.asset.tag: Type2 - Board Asset Tag + dmi.board.name: Yebisu_IL + dmi.board.vendor: IL + dmi.board.version: V1.13 + dmi.chassis.type: 10 + dmi.chassis.vendor: Acer + dmi.chassis.version: Chassis Version + dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: + dmi.product.family: Swift 5 + dmi.product.name: Swift SF514-54T + dmi.product.sku: + dmi.product.version: V1.13 + dmi.sys.vendor: Acer ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361882/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago)
[Kernel-packages] [Bug 1875236] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361888/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) MachineType: Acer Swift SF514-54T Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2019 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Yebisu_IL dmi.board.vendor: IL dmi.board.version: V1.13 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.family: Swift 5 dmi.product.name: Swift SF514-54T dmi.product.sku: dmi.product.version: V1.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875236] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361883/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) MachineType: Acer Swift SF514-54T Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2019 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Yebisu_IL dmi.board.vendor: IL dmi.board.version: V1.13 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.family: Swift 5 dmi.product.name: Swift SF514-54T dmi.product.sku: dmi.product.version: V1.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875236] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361884/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) MachineType: Acer Swift SF514-54T Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2019 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Yebisu_IL dmi.board.vendor: IL dmi.board.version: V1.13 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.family: Swift 5 dmi.product.name: Swift SF514-54T dmi.product.sku: dmi.product.version: V1.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1875236] Lsusb-t.txt
apport information ** Attachment added: "Lsusb-t.txt" https://bugs.launchpad.net/bugs/1875236/+attachment/5361889/+files/Lsusb-t.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875236 Title: Different kernel gives different RAM results Status in linux package in Ubuntu: Confirmed Bug description: Kernel from installed distro doesn't recognize all available memory on my laptop (Acer Swift 5 SF514-54T-59VD, Ubuntu Focal Fossa 20.04). When I load Linux distro (Focal Fossa 20.04 release) from installation USB-stick Kernel detects all memory (over 7Gb, part of memory used by graphic, on laptop installed 8Gb memory). Kernel from installed distro shows only 1.5 Gb available memory. Output of commands for installed system: $ lsb_release -a; uname -a; free -m No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux mxmaki 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 1628 806 110 163 711 498 Swap: 2047 24 2023 Output of commands for system from installation USB-stick: $ lsb_release -a; uname -a; free -m Distributor ID: Ubuntu Description: Ubuntu 20.04 LTS Release: 20.04 Codename: focal Linux ubuntu 5.4.0-26-generic #30-Ubuntu SMP Mon Apr 20 16:58:30 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux total used free shared buff/cache available Mem: 7641 763 3323 675 3554 5903 Swap: 0 0 0 --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-04-18 (9 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Beta amd64 (20200417) MachineType: Acer Swift SF514-54T Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=52fa8c38-ee95-4b49-834a-f21af8e7e904 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 Tags: focal Uname: Linux 5.4.0-26-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 12/19/2019 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.13 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: Yebisu_IL dmi.board.vendor: IL dmi.board.version: V1.13 dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.13:bd12/19/2019:svnAcer:pnSwiftSF514-54T:pvrV1.13:rvnIL:rnYebisu_IL:rvrV1.13:cvnAcer:ct10:cvrChassisVersion: dmi.product.family: Swift 5 dmi.product.name: Swift SF514-54T dmi.product.sku: dmi.product.version: V1.13 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875236/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1868551] Re: Intel GPU Hangs : random screen freezing w/ Ubuntu 20.04 (Linux 5.4) i915_active_acquire
@leozinho29-eu Can you add i915.enable_fbc=0 to the kernel command line and see if that fixes the "Atomic update failure" messages? If it does, then we'll know the problem is related to framebuffer compression. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1868551 Title: Intel GPU Hangs : random screen freezing w/ Ubuntu 20.04 (Linux 5.4) i915_active_acquire Status in linux package in Ubuntu: Confirmed Bug description: uname -a Linux xps 5.4.0-14-generic #17-Ubuntu SMP Thu Feb 6 22:47:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu Focal Fossa (development branch) Release: 20.04 Codename: focal [ 2556.956079] BUG: kernel NULL pointer dereference, address: 0040 [ 2556.956084] #PF: supervisor read access in kernel mode [ 2556.956084] #PF: error_code(0x) - not-present page [ 2556.956085] PGD 0 P4D 0 [ 2556.956088] Oops: [#1] SMP NOPTI [ 2556.956090] CPU: 2 PID: 1685 Comm: xfwm4 Not tainted 5.4.0-14-generic #17-Ubuntu [ 2556.956092] Hardware name: Dell Inc. XPS 13 7390/0G2D0W, BIOS 1.2.0 10/03/2019 [ 2556.956161] RIP: 0010:i915_active_acquire+0xe/0x80 [i915] [ 2556.956163] Code: 00 48 c7 c6 11 4d 6b c0 e8 af a1 d6 c7 5d c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 <8b> 47 38 48 89 fb 85 c0 74 17 8d 50 01 f0 0f b1 53 38 75 f2 45 31 [ 2556.956164] RSP: 0018:ac17c13279c8 EFLAGS: 00010286 [ 2556.956165] RAX: RBX: 983831d3e480 RCX: [ 2556.956166] RDX: 983783475200 RSI: 983831d3e480 RDI: 0008 [ 2556.956167] RBP: ac17c13279e0 R08: R09: 98382d6b6520 [ 2556.956168] R10: 6cc0 R11: 983838b4db00 R12: 983783475200 [ 2556.956169] R13: 0008 R14: 983783475200 R15: 98382d6b6400 [ 2556.956170] FS: 7f9031c28f00() GS:98383e50() knlGS: [ 2556.956171] CS: 0010 DS: ES: CR0: 80050033 [ 2556.956172] CR2: 0040 CR3: 00046eac6001 CR4: 003606e0 [ 2556.956173] Call Trace: [ 2556.956199] i915_active_ref+0x24/0x200 [i915] [ 2556.956223] i915_vma_move_to_active+0x74/0xf0 [i915] [ 2556.956245] eb_submit+0xff/0x440 [i915] [ 2556.956267] i915_gem_do_execbuffer+0x88e/0xc20 [i915] [ 2556.956271] ? sock_def_readable+0x40/0x70 [ 2556.956274] ? __kmalloc_node+0x205/0x320 [ 2556.956294] i915_gem_execbuffer2_ioctl+0x2c3/0x3d0 [i915] [ 2556.956314] ? i915_gem_execbuffer_ioctl+0x2d0/0x2d0 [i915] [ 2556.956330] drm_ioctl_kernel+0xae/0xf0 [drm] [ 2556.956338] drm_ioctl+0x234/0x3d0 [drm] [ 2556.956358] ? i915_gem_execbuffer_ioctl+0x2d0/0x2d0 [i915] [ 2556.956361] ? vfs_writev+0xc3/0xf0 [ 2556.956363] do_vfs_ioctl+0x407/0x670 [ 2556.956365] ? fput+0x13/0x15 [ 2556.956367] ? __sys_recvmsg+0x88/0xa0 [ 2556.956369] ksys_ioctl+0x67/0x90 [ 2556.956371] __x64_sys_ioctl+0x1a/0x20 [ 2556.956373] do_syscall_64+0x57/0x190 [ 2556.956376] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 2556.956377] RIP: 0033:0x7f9032b3f68b [ 2556.956379] Code: 0f 1e fa 48 8b 05 05 28 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d d5 27 0d 00 f7 d8 64 89 01 48 [ 2556.956380] RSP: 002b:7ffee39a0078 EFLAGS: 0246 ORIG_RAX: 0010 [ 2556.956381] RAX: ffda RBX: 55a8abeb6e48 RCX: 7f9032b3f68b [ 2556.956382] RDX: 7ffee39a0090 RSI: 40406469 RDI: 000d [ 2556.956382] RBP: 7ffee39a0120 R08: 0001 R09: [ 2556.956383] R10: 7ffee39a0140 R11: 0246 R12: 7f9022a4f460 [ 2556.956384] R13: R14: 7ffee39a0090 R15: 000d [ 2556.956385] Modules linked in: ccm rfcomm xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp ip6table_mangle ip6table_nat typec_displayport iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables cmac nfnetlink algif_hash ip6table_filter ip6_tables iptable_filter algif_skcipher af_alg bpfilter bridge stp llc snd_sof_pci snd_sof_intel_hda_common snd_soc_hdac_hda snd_sof_intel_hda snd_sof_intel_byt snd_sof_intel_ipc snd_sof snd_sof_xtensa_dsp snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_hdmi snd_soc_core snd_compress ac97_bus snd_pcm_dmaengine bnep snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_intel_nhlt snd_hda_codec snd_hda_core snd_hwdep snd_pcm nls_iso8859_1 mei_hdcp intel_rapl_msr snd_seq_midi snd_seq_midi_event dell_laptop ledtrig_audio snd_rawmidi x86_pkg_temp_thermal intel_powerclamp coretemp joydev kvm_intel kvm
[Kernel-packages] [Bug 1875469] [NEW] Touch pad unresponsive
Public bug reported: I have purchased a Lenovo Ideapad 7 Slim 15 with lenovo model number 82AD0001US and the touch pad does not work, nor does the clicking. It doesn't appear to be registering as a device. I have checked with the windows installation that the physical device does work. This with the install of Ubuntu 20.04 LTS. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Mon Apr 27 14:38:12 2020 InstallationDate: Installed on 2020-04-27 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: LENOVO 82AD ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=c19850db-e248-4f97-b75b-c5dc6e03ba33 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/30/2019 dmi.bios.vendor: LENOVO dmi.bios.version: DHCN19WW dmi.board.asset.tag: ��� dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0J40709 WIN dmi.chassis.asset.tag: ��� dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: IdeaPad Slim 7 15IIL05 dmi.modalias: dmi:bvnLENOVO:bvrDHCN19WW:bd12/30/2019:svnLENOVO:pn82AD:pvrIdeaPadSlim715IIL05:rvnLENOVO:rnLNVNB161216:rvrSDK0J40709WIN:cvnLENOVO:ct10:cvrIdeaPadSlim715IIL05: dmi.product.family: IdeaPad Slim 7 15IIL05 dmi.product.name: 82AD dmi.product.sku: LENOVO_MT_82AD_BU_idea_FM_IdeaPad Slim 7 15IIL05 dmi.product.version: IdeaPad Slim 7 15IIL05 dmi.sys.vendor: LENOVO ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal ** Attachment added: "devices" https://bugs.launchpad.net/bugs/1875469/+attachment/5361862/+files/devices -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1875469 Title: Touch pad unresponsive Status in linux package in Ubuntu: New Bug description: I have purchased a Lenovo Ideapad 7 Slim 15 with lenovo model number 82AD0001US and the touch pad does not work, nor does the clicking. It doesn't appear to be registering as a device. I have checked with the windows installation that the physical device does work. This with the install of Ubuntu 20.04 LTS. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-26-generic 5.4.0-26.30 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Mon Apr 27 14:38:12 2020 InstallationDate: Installed on 2020-04-27 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: LENOVO 82AD ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-26-generic root=UUID=c19850db-e248-4f97-b75b-c5dc6e03ba33 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-26-generic N/A linux-backports-modules-5.4.0-26-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/30/2019 dmi.bios.vendor: LENOVO dmi.bios.version: DHCN19WW dmi.board.asset.tag: ��� dmi.board.name: LNVNB161216 dmi.board.vendor: LENOVO dmi.board.version: SDK0J40709 WIN dmi.chassis.asset.tag: ��� dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: IdeaPad Slim 7 15IIL05 dmi.modalias: dmi:bvnLENOVO:bvrDHCN19WW:bd12/30/2019:svnLENOVO:pn82AD:pvrIdeaPadSlim715IIL05:rvnLENOVO:rnLNVNB161216:rvrSDK0J40709WIN:cvnLENOVO:ct10:cvrIdeaPadSlim715IIL05: dmi.product.family: IdeaPad Slim 7 15IIL05 dmi.product.name: 82AD dmi.product.sku: LENOVO_MT_82AD_BU_idea_FM_IdeaPad Slim 7 15IIL05 dmi.product.version: IdeaPad Slim 7 15IIL05 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1875469/+subscriptions -- Mailing
