[Kernel-packages] [Bug 1377292] Re: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC
No reaction on linux-mmc mailing list after post and repost after some time. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in linux package in Ubuntu: Triaged Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag
[Kernel-packages] [Bug 1377261] Re: Bluetooth 04ca:300b does not work in 14.04
3.17 appears to fix the problem. I tested various data and audio connections and ran into no problems. ** Tags added: kernel-fixed-upstream -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: Confirmed Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1378434] [NEW] 14.04: libvirt-qemu/apparmor: missing permissions for 9p shares
Public bug reported: I have an asterisk server running in a KVM and give it access to the storage array of the host via 9p. /etc/apparmor.d/abstractions/libvirt-qemu was missing the permissions for capa fowner and capa fsetid which are necessary for full access to the shares and which I fixed myself. Now, additionally, it seems that the helper for the KVMs only sets r and w permissions for the 9p shares. For full access in this case, also the link permission is needed. Manually adding the l flag to /etc/apparmor.d/libvirt-qemu/UUID.files does NOT work. The permission structure seems to be hardcoded in the source of the helper. Typical log entry: Oct 7 19:04:14 nostromo kernel: [498751.395000] type=1400 audit(1412697854.669:203): apparmor=DENIED operation=link profile =libvirt-d2719da3-1869-9cee-b02f-8d86458bbea2 name=/storage/asterisk/spool/voicemail/default/1102/Old/.lock pid=7775 comm=pool requested_mask=l denied_mask=l fsuid=0 ouid=0 target=/storage/asterisk/spool/voicemail/default/1102/Old/.lock- 0fc30204 Possible solutions: a) Add l permission to the source of the helper b) Un-hardcode the permissions set by the helper and make them configurable through an /etc/default config or similar. This would be a preferable solution. --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Oct 2 00:29 seq crw-rw 1 root audio 116, 33 Oct 2 00:29 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=28b31865-bf30-4c40-a9a6-32d44abec88b InstallationDate: Installed on 2014-08-17 (50 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) MachineType: ASUSTeK COMPUTER INC. P9D-V Series NonfreeKernelModules: zfs zunicode zavl zcommon znvpair Package: linux (not installed) PciMultimedia: ProcFB: 0 astdrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=c61299e4-1f7f-4807-aff6-0a3b4028b88c ro ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 RfKill: Error: [Errno 2] No such file or directory Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 11/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0601 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P9D-V Series dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 17 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0601:bd11/13/2013:svnASUSTeKCOMPUTERINC.:pnP9D-VSeries:pvrRev1.xx:rvnASUSTeKCOMPUTERINC.:rnP9D-VSeries:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct17:cvrToBeFilledByO.E.M.: dmi.product.name: P9D-V Series dmi.product.version: Rev 1.xx dmi.sys.vendor: ASUSTeK COMPUTER INC. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-collected trusty ** Tags added: apport-collected trusty ** Description changed: I have an asterisk server running in a KVM and give it access to the storage array of the host via 9p. /etc/apparmor.d/abstractions/libvirt-qemu was missing the permissions for capa fowner and capa fsetid which are necessary for full access to the shares and which I fixed myself. Now, additionally, it seems that the helper for the KVMs only sets r and w permissions for the 9p shares. For full access in this case, also the link permission is needed. Manually adding the l flag to /etc/apparmor.d/libvirt-qemu/UUID.files does NOT work. The permission structure seems to be hardcoded in the source of the helper. Typical log entry: Oct 7 19:04:14 nostromo kernel: [498751.395000] type=1400 audit(1412697854.669:203): apparmor=DENIED operation=link profile =libvirt-d2719da3-1869-9cee-b02f-8d86458bbea2 name=/storage/asterisk/spool/voicemail/default/1102/Old/.lock pid=7775 comm=pool requested_mask=l denied_mask=l fsuid=0 ouid=0 target=/storage/asterisk/spool/voicemail/default/1102/Old/.lock- 0fc30204 Possible solutions: a) Add l permission to the source of the helper b) Un-hardcode the permissions set by the helper and make them configurable through an /etc/default config or similar. This would be a preferable solution. + --- + AlsaDevices: + total 0 + crw-rw 1 root audio 116, 1 Oct 2 00:29 seq + crw-rw 1 root audio 116, 33 Oct 2 00:29 timer + AplayDevices: Error: [Errno 2] No such
[Kernel-packages] [Bug 1378434] CurrentDmesg.txt
apport information ** Attachment added: CurrentDmesg.txt https://bugs.launchpad.net/bugs/1378434/+attachment/4227592/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1378434 Title: 14.04: libvirt-qemu/apparmor: missing permissions for 9p shares Status in “linux” package in Ubuntu: New Bug description: I have an asterisk server running in a KVM and give it access to the storage array of the host via 9p. /etc/apparmor.d/abstractions/libvirt-qemu was missing the permissions for capa fowner and capa fsetid which are necessary for full access to the shares and which I fixed myself. Now, additionally, it seems that the helper for the KVMs only sets r and w permissions for the 9p shares. For full access in this case, also the link permission is needed. Manually adding the l flag to /etc/apparmor.d/libvirt-qemu/UUID.files does NOT work. The permission structure seems to be hardcoded in the source of the helper. Typical log entry: Oct 7 19:04:14 nostromo kernel: [498751.395000] type=1400 audit(1412697854.669:203): apparmor=DENIED operation=link profile =libvirt-d2719da3-1869-9cee-b02f-8d86458bbea2 name=/storage/asterisk/spool/voicemail/default/1102/Old/.lock pid=7775 comm=pool requested_mask=l denied_mask=l fsuid=0 ouid=0 target=/storage/asterisk/spool/voicemail/default/1102/Old/.lock- 0fc30204 Possible solutions: a) Add l permission to the source of the helper b) Un-hardcode the permissions set by the helper and make them configurable through an /etc/default config or similar. This would be a preferable solution. --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Oct 2 00:29 seq crw-rw 1 root audio 116, 33 Oct 2 00:29 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=28b31865-bf30-4c40-a9a6-32d44abec88b InstallationDate: Installed on 2014-08-17 (50 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) MachineType: ASUSTeK COMPUTER INC. P9D-V Series NonfreeKernelModules: zfs zunicode zavl zcommon znvpair Package: linux (not installed) PciMultimedia: ProcFB: 0 astdrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=c61299e4-1f7f-4807-aff6-0a3b4028b88c ro ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 RfKill: Error: [Errno 2] No such file or directory Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 11/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0601 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P9D-V Series dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 17 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0601:bd11/13/2013:svnASUSTeKCOMPUTERINC.:pnP9D-VSeries:pvrRev1.xx:rvnASUSTeKCOMPUTERINC.:rnP9D-VSeries:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct17:cvrToBeFilledByO.E.M.: dmi.product.name: P9D-V Series dmi.product.version: Rev 1.xx dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1378434/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1378434] BootDmesg.txt
apport information ** Attachment added: BootDmesg.txt https://bugs.launchpad.net/bugs/1378434/+attachment/4227591/+files/BootDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1378434 Title: 14.04: libvirt-qemu/apparmor: missing permissions for 9p shares Status in “linux” package in Ubuntu: New Bug description: I have an asterisk server running in a KVM and give it access to the storage array of the host via 9p. /etc/apparmor.d/abstractions/libvirt-qemu was missing the permissions for capa fowner and capa fsetid which are necessary for full access to the shares and which I fixed myself. Now, additionally, it seems that the helper for the KVMs only sets r and w permissions for the 9p shares. For full access in this case, also the link permission is needed. Manually adding the l flag to /etc/apparmor.d/libvirt-qemu/UUID.files does NOT work. The permission structure seems to be hardcoded in the source of the helper. Typical log entry: Oct 7 19:04:14 nostromo kernel: [498751.395000] type=1400 audit(1412697854.669:203): apparmor=DENIED operation=link profile =libvirt-d2719da3-1869-9cee-b02f-8d86458bbea2 name=/storage/asterisk/spool/voicemail/default/1102/Old/.lock pid=7775 comm=pool requested_mask=l denied_mask=l fsuid=0 ouid=0 target=/storage/asterisk/spool/voicemail/default/1102/Old/.lock- 0fc30204 Possible solutions: a) Add l permission to the source of the helper b) Un-hardcode the permissions set by the helper and make them configurable through an /etc/default config or similar. This would be a preferable solution. --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Oct 2 00:29 seq crw-rw 1 root audio 116, 33 Oct 2 00:29 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=28b31865-bf30-4c40-a9a6-32d44abec88b InstallationDate: Installed on 2014-08-17 (50 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) MachineType: ASUSTeK COMPUTER INC. P9D-V Series NonfreeKernelModules: zfs zunicode zavl zcommon znvpair Package: linux (not installed) PciMultimedia: ProcFB: 0 astdrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=c61299e4-1f7f-4807-aff6-0a3b4028b88c ro ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 RfKill: Error: [Errno 2] No such file or directory Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 11/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0601 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P9D-V Series dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 17 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0601:bd11/13/2013:svnASUSTeKCOMPUTERINC.:pnP9D-VSeries:pvrRev1.xx:rvnASUSTeKCOMPUTERINC.:rnP9D-VSeries:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct17:cvrToBeFilledByO.E.M.: dmi.product.name: P9D-V Series dmi.product.version: Rev 1.xx dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1378434/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1378434] ProcCpuinfo.txt
apport information ** Attachment added: ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1378434/+attachment/4227596/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1378434 Title: 14.04: libvirt-qemu/apparmor: missing permissions for 9p shares Status in “linux” package in Ubuntu: New Bug description: I have an asterisk server running in a KVM and give it access to the storage array of the host via 9p. /etc/apparmor.d/abstractions/libvirt-qemu was missing the permissions for capa fowner and capa fsetid which are necessary for full access to the shares and which I fixed myself. Now, additionally, it seems that the helper for the KVMs only sets r and w permissions for the 9p shares. For full access in this case, also the link permission is needed. Manually adding the l flag to /etc/apparmor.d/libvirt-qemu/UUID.files does NOT work. The permission structure seems to be hardcoded in the source of the helper. Typical log entry: Oct 7 19:04:14 nostromo kernel: [498751.395000] type=1400 audit(1412697854.669:203): apparmor=DENIED operation=link profile =libvirt-d2719da3-1869-9cee-b02f-8d86458bbea2 name=/storage/asterisk/spool/voicemail/default/1102/Old/.lock pid=7775 comm=pool requested_mask=l denied_mask=l fsuid=0 ouid=0 target=/storage/asterisk/spool/voicemail/default/1102/Old/.lock- 0fc30204 Possible solutions: a) Add l permission to the source of the helper b) Un-hardcode the permissions set by the helper and make them configurable through an /etc/default config or similar. This would be a preferable solution. --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Oct 2 00:29 seq crw-rw 1 root audio 116, 33 Oct 2 00:29 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=28b31865-bf30-4c40-a9a6-32d44abec88b InstallationDate: Installed on 2014-08-17 (50 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) MachineType: ASUSTeK COMPUTER INC. P9D-V Series NonfreeKernelModules: zfs zunicode zavl zcommon znvpair Package: linux (not installed) PciMultimedia: ProcFB: 0 astdrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=c61299e4-1f7f-4807-aff6-0a3b4028b88c ro ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 RfKill: Error: [Errno 2] No such file or directory Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 11/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0601 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P9D-V Series dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 17 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0601:bd11/13/2013:svnASUSTeKCOMPUTERINC.:pnP9D-VSeries:pvrRev1.xx:rvnASUSTeKCOMPUTERINC.:rnP9D-VSeries:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct17:cvrToBeFilledByO.E.M.: dmi.product.name: P9D-V Series dmi.product.version: Rev 1.xx dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1378434/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1378434] UdevLog.txt
apport information ** Attachment added: UdevLog.txt https://bugs.launchpad.net/bugs/1378434/+attachment/4227601/+files/UdevLog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1378434 Title: 14.04: libvirt-qemu/apparmor: missing permissions for 9p shares Status in “linux” package in Ubuntu: New Bug description: I have an asterisk server running in a KVM and give it access to the storage array of the host via 9p. /etc/apparmor.d/abstractions/libvirt-qemu was missing the permissions for capa fowner and capa fsetid which are necessary for full access to the shares and which I fixed myself. Now, additionally, it seems that the helper for the KVMs only sets r and w permissions for the 9p shares. For full access in this case, also the link permission is needed. Manually adding the l flag to /etc/apparmor.d/libvirt-qemu/UUID.files does NOT work. The permission structure seems to be hardcoded in the source of the helper. Typical log entry: Oct 7 19:04:14 nostromo kernel: [498751.395000] type=1400 audit(1412697854.669:203): apparmor=DENIED operation=link profile =libvirt-d2719da3-1869-9cee-b02f-8d86458bbea2 name=/storage/asterisk/spool/voicemail/default/1102/Old/.lock pid=7775 comm=pool requested_mask=l denied_mask=l fsuid=0 ouid=0 target=/storage/asterisk/spool/voicemail/default/1102/Old/.lock- 0fc30204 Possible solutions: a) Add l permission to the source of the helper b) Un-hardcode the permissions set by the helper and make them configurable through an /etc/default config or similar. This would be a preferable solution. --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Oct 2 00:29 seq crw-rw 1 root audio 116, 33 Oct 2 00:29 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=28b31865-bf30-4c40-a9a6-32d44abec88b InstallationDate: Installed on 2014-08-17 (50 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) MachineType: ASUSTeK COMPUTER INC. P9D-V Series NonfreeKernelModules: zfs zunicode zavl zcommon znvpair Package: linux (not installed) PciMultimedia: ProcFB: 0 astdrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=c61299e4-1f7f-4807-aff6-0a3b4028b88c ro ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 RfKill: Error: [Errno 2] No such file or directory Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 11/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0601 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P9D-V Series dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 17 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0601:bd11/13/2013:svnASUSTeKCOMPUTERINC.:pnP9D-VSeries:pvrRev1.xx:rvnASUSTeKCOMPUTERINC.:rnP9D-VSeries:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct17:cvrToBeFilledByO.E.M.: dmi.product.name: P9D-V Series dmi.product.version: Rev 1.xx dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1378434/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1378434] ProcInterrupts.txt
apport information ** Attachment added: ProcInterrupts.txt https://bugs.launchpad.net/bugs/1378434/+attachment/4227598/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1378434 Title: 14.04: libvirt-qemu/apparmor: missing permissions for 9p shares Status in “linux” package in Ubuntu: New Bug description: I have an asterisk server running in a KVM and give it access to the storage array of the host via 9p. /etc/apparmor.d/abstractions/libvirt-qemu was missing the permissions for capa fowner and capa fsetid which are necessary for full access to the shares and which I fixed myself. Now, additionally, it seems that the helper for the KVMs only sets r and w permissions for the 9p shares. For full access in this case, also the link permission is needed. Manually adding the l flag to /etc/apparmor.d/libvirt-qemu/UUID.files does NOT work. The permission structure seems to be hardcoded in the source of the helper. Typical log entry: Oct 7 19:04:14 nostromo kernel: [498751.395000] type=1400 audit(1412697854.669:203): apparmor=DENIED operation=link profile =libvirt-d2719da3-1869-9cee-b02f-8d86458bbea2 name=/storage/asterisk/spool/voicemail/default/1102/Old/.lock pid=7775 comm=pool requested_mask=l denied_mask=l fsuid=0 ouid=0 target=/storage/asterisk/spool/voicemail/default/1102/Old/.lock- 0fc30204 Possible solutions: a) Add l permission to the source of the helper b) Un-hardcode the permissions set by the helper and make them configurable through an /etc/default config or similar. This would be a preferable solution. --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Oct 2 00:29 seq crw-rw 1 root audio 116, 33 Oct 2 00:29 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=28b31865-bf30-4c40-a9a6-32d44abec88b InstallationDate: Installed on 2014-08-17 (50 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) MachineType: ASUSTeK COMPUTER INC. P9D-V Series NonfreeKernelModules: zfs zunicode zavl zcommon znvpair Package: linux (not installed) PciMultimedia: ProcFB: 0 astdrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=c61299e4-1f7f-4807-aff6-0a3b4028b88c ro ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 RfKill: Error: [Errno 2] No such file or directory Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 11/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0601 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P9D-V Series dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 17 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0601:bd11/13/2013:svnASUSTeKCOMPUTERINC.:pnP9D-VSeries:pvrRev1.xx:rvnASUSTeKCOMPUTERINC.:rnP9D-VSeries:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct17:cvrToBeFilledByO.E.M.: dmi.product.name: P9D-V Series dmi.product.version: Rev 1.xx dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1378434/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1378434] ProcEnviron.txt
apport information ** Attachment added: ProcEnviron.txt https://bugs.launchpad.net/bugs/1378434/+attachment/4227597/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1378434 Title: 14.04: libvirt-qemu/apparmor: missing permissions for 9p shares Status in “linux” package in Ubuntu: New Bug description: I have an asterisk server running in a KVM and give it access to the storage array of the host via 9p. /etc/apparmor.d/abstractions/libvirt-qemu was missing the permissions for capa fowner and capa fsetid which are necessary for full access to the shares and which I fixed myself. Now, additionally, it seems that the helper for the KVMs only sets r and w permissions for the 9p shares. For full access in this case, also the link permission is needed. Manually adding the l flag to /etc/apparmor.d/libvirt-qemu/UUID.files does NOT work. The permission structure seems to be hardcoded in the source of the helper. Typical log entry: Oct 7 19:04:14 nostromo kernel: [498751.395000] type=1400 audit(1412697854.669:203): apparmor=DENIED operation=link profile =libvirt-d2719da3-1869-9cee-b02f-8d86458bbea2 name=/storage/asterisk/spool/voicemail/default/1102/Old/.lock pid=7775 comm=pool requested_mask=l denied_mask=l fsuid=0 ouid=0 target=/storage/asterisk/spool/voicemail/default/1102/Old/.lock- 0fc30204 Possible solutions: a) Add l permission to the source of the helper b) Un-hardcode the permissions set by the helper and make them configurable through an /etc/default config or similar. This would be a preferable solution. --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Oct 2 00:29 seq crw-rw 1 root audio 116, 33 Oct 2 00:29 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=28b31865-bf30-4c40-a9a6-32d44abec88b InstallationDate: Installed on 2014-08-17 (50 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) MachineType: ASUSTeK COMPUTER INC. P9D-V Series NonfreeKernelModules: zfs zunicode zavl zcommon znvpair Package: linux (not installed) PciMultimedia: ProcFB: 0 astdrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=c61299e4-1f7f-4807-aff6-0a3b4028b88c ro ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 RfKill: Error: [Errno 2] No such file or directory Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 11/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0601 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P9D-V Series dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 17 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0601:bd11/13/2013:svnASUSTeKCOMPUTERINC.:pnP9D-VSeries:pvrRev1.xx:rvnASUSTeKCOMPUTERINC.:rnP9D-VSeries:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct17:cvrToBeFilledByO.E.M.: dmi.product.name: P9D-V Series dmi.product.version: Rev 1.xx dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1378434/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1378434] UdevDb.txt
apport information ** Attachment added: UdevDb.txt https://bugs.launchpad.net/bugs/1378434/+attachment/4227600/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1378434 Title: 14.04: libvirt-qemu/apparmor: missing permissions for 9p shares Status in “linux” package in Ubuntu: New Bug description: I have an asterisk server running in a KVM and give it access to the storage array of the host via 9p. /etc/apparmor.d/abstractions/libvirt-qemu was missing the permissions for capa fowner and capa fsetid which are necessary for full access to the shares and which I fixed myself. Now, additionally, it seems that the helper for the KVMs only sets r and w permissions for the 9p shares. For full access in this case, also the link permission is needed. Manually adding the l flag to /etc/apparmor.d/libvirt-qemu/UUID.files does NOT work. The permission structure seems to be hardcoded in the source of the helper. Typical log entry: Oct 7 19:04:14 nostromo kernel: [498751.395000] type=1400 audit(1412697854.669:203): apparmor=DENIED operation=link profile =libvirt-d2719da3-1869-9cee-b02f-8d86458bbea2 name=/storage/asterisk/spool/voicemail/default/1102/Old/.lock pid=7775 comm=pool requested_mask=l denied_mask=l fsuid=0 ouid=0 target=/storage/asterisk/spool/voicemail/default/1102/Old/.lock- 0fc30204 Possible solutions: a) Add l permission to the source of the helper b) Un-hardcode the permissions set by the helper and make them configurable through an /etc/default config or similar. This would be a preferable solution. --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Oct 2 00:29 seq crw-rw 1 root audio 116, 33 Oct 2 00:29 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=28b31865-bf30-4c40-a9a6-32d44abec88b InstallationDate: Installed on 2014-08-17 (50 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) MachineType: ASUSTeK COMPUTER INC. P9D-V Series NonfreeKernelModules: zfs zunicode zavl zcommon znvpair Package: linux (not installed) PciMultimedia: ProcFB: 0 astdrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=c61299e4-1f7f-4807-aff6-0a3b4028b88c ro ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 RfKill: Error: [Errno 2] No such file or directory Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 11/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0601 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P9D-V Series dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 17 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0601:bd11/13/2013:svnASUSTeKCOMPUTERINC.:pnP9D-VSeries:pvrRev1.xx:rvnASUSTeKCOMPUTERINC.:rnP9D-VSeries:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct17:cvrToBeFilledByO.E.M.: dmi.product.name: P9D-V Series dmi.product.version: Rev 1.xx dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1378434/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1378434] ProcModules.txt
apport information ** Attachment added: ProcModules.txt https://bugs.launchpad.net/bugs/1378434/+attachment/4227599/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1378434 Title: 14.04: libvirt-qemu/apparmor: missing permissions for 9p shares Status in “linux” package in Ubuntu: New Bug description: I have an asterisk server running in a KVM and give it access to the storage array of the host via 9p. /etc/apparmor.d/abstractions/libvirt-qemu was missing the permissions for capa fowner and capa fsetid which are necessary for full access to the shares and which I fixed myself. Now, additionally, it seems that the helper for the KVMs only sets r and w permissions for the 9p shares. For full access in this case, also the link permission is needed. Manually adding the l flag to /etc/apparmor.d/libvirt-qemu/UUID.files does NOT work. The permission structure seems to be hardcoded in the source of the helper. Typical log entry: Oct 7 19:04:14 nostromo kernel: [498751.395000] type=1400 audit(1412697854.669:203): apparmor=DENIED operation=link profile =libvirt-d2719da3-1869-9cee-b02f-8d86458bbea2 name=/storage/asterisk/spool/voicemail/default/1102/Old/.lock pid=7775 comm=pool requested_mask=l denied_mask=l fsuid=0 ouid=0 target=/storage/asterisk/spool/voicemail/default/1102/Old/.lock- 0fc30204 Possible solutions: a) Add l permission to the source of the helper b) Un-hardcode the permissions set by the helper and make them configurable through an /etc/default config or similar. This would be a preferable solution. --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Oct 2 00:29 seq crw-rw 1 root audio 116, 33 Oct 2 00:29 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=28b31865-bf30-4c40-a9a6-32d44abec88b InstallationDate: Installed on 2014-08-17 (50 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) MachineType: ASUSTeK COMPUTER INC. P9D-V Series NonfreeKernelModules: zfs zunicode zavl zcommon znvpair Package: linux (not installed) PciMultimedia: ProcFB: 0 astdrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=c61299e4-1f7f-4807-aff6-0a3b4028b88c ro ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 RfKill: Error: [Errno 2] No such file or directory Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 11/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0601 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P9D-V Series dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 17 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0601:bd11/13/2013:svnASUSTeKCOMPUTERINC.:pnP9D-VSeries:pvrRev1.xx:rvnASUSTeKCOMPUTERINC.:rnP9D-VSeries:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct17:cvrToBeFilledByO.E.M.: dmi.product.name: P9D-V Series dmi.product.version: Rev 1.xx dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1378434/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1378434] IwConfig.txt
apport information ** Attachment added: IwConfig.txt https://bugs.launchpad.net/bugs/1378434/+attachment/4227593/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1378434 Title: 14.04: libvirt-qemu/apparmor: missing permissions for 9p shares Status in “linux” package in Ubuntu: New Bug description: I have an asterisk server running in a KVM and give it access to the storage array of the host via 9p. /etc/apparmor.d/abstractions/libvirt-qemu was missing the permissions for capa fowner and capa fsetid which are necessary for full access to the shares and which I fixed myself. Now, additionally, it seems that the helper for the KVMs only sets r and w permissions for the 9p shares. For full access in this case, also the link permission is needed. Manually adding the l flag to /etc/apparmor.d/libvirt-qemu/UUID.files does NOT work. The permission structure seems to be hardcoded in the source of the helper. Typical log entry: Oct 7 19:04:14 nostromo kernel: [498751.395000] type=1400 audit(1412697854.669:203): apparmor=DENIED operation=link profile =libvirt-d2719da3-1869-9cee-b02f-8d86458bbea2 name=/storage/asterisk/spool/voicemail/default/1102/Old/.lock pid=7775 comm=pool requested_mask=l denied_mask=l fsuid=0 ouid=0 target=/storage/asterisk/spool/voicemail/default/1102/Old/.lock- 0fc30204 Possible solutions: a) Add l permission to the source of the helper b) Un-hardcode the permissions set by the helper and make them configurable through an /etc/default config or similar. This would be a preferable solution. --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Oct 2 00:29 seq crw-rw 1 root audio 116, 33 Oct 2 00:29 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=28b31865-bf30-4c40-a9a6-32d44abec88b InstallationDate: Installed on 2014-08-17 (50 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) MachineType: ASUSTeK COMPUTER INC. P9D-V Series NonfreeKernelModules: zfs zunicode zavl zcommon znvpair Package: linux (not installed) PciMultimedia: ProcFB: 0 astdrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=c61299e4-1f7f-4807-aff6-0a3b4028b88c ro ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 RfKill: Error: [Errno 2] No such file or directory Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 11/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0601 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P9D-V Series dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 17 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0601:bd11/13/2013:svnASUSTeKCOMPUTERINC.:pnP9D-VSeries:pvrRev1.xx:rvnASUSTeKCOMPUTERINC.:rnP9D-VSeries:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct17:cvrToBeFilledByO.E.M.: dmi.product.name: P9D-V Series dmi.product.version: Rev 1.xx dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1378434/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1378434] Lsusb.txt
apport information ** Attachment added: Lsusb.txt https://bugs.launchpad.net/bugs/1378434/+attachment/4227595/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1378434 Title: 14.04: libvirt-qemu/apparmor: missing permissions for 9p shares Status in “linux” package in Ubuntu: New Bug description: I have an asterisk server running in a KVM and give it access to the storage array of the host via 9p. /etc/apparmor.d/abstractions/libvirt-qemu was missing the permissions for capa fowner and capa fsetid which are necessary for full access to the shares and which I fixed myself. Now, additionally, it seems that the helper for the KVMs only sets r and w permissions for the 9p shares. For full access in this case, also the link permission is needed. Manually adding the l flag to /etc/apparmor.d/libvirt-qemu/UUID.files does NOT work. The permission structure seems to be hardcoded in the source of the helper. Typical log entry: Oct 7 19:04:14 nostromo kernel: [498751.395000] type=1400 audit(1412697854.669:203): apparmor=DENIED operation=link profile =libvirt-d2719da3-1869-9cee-b02f-8d86458bbea2 name=/storage/asterisk/spool/voicemail/default/1102/Old/.lock pid=7775 comm=pool requested_mask=l denied_mask=l fsuid=0 ouid=0 target=/storage/asterisk/spool/voicemail/default/1102/Old/.lock- 0fc30204 Possible solutions: a) Add l permission to the source of the helper b) Un-hardcode the permissions set by the helper and make them configurable through an /etc/default config or similar. This would be a preferable solution. --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Oct 2 00:29 seq crw-rw 1 root audio 116, 33 Oct 2 00:29 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=28b31865-bf30-4c40-a9a6-32d44abec88b InstallationDate: Installed on 2014-08-17 (50 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) MachineType: ASUSTeK COMPUTER INC. P9D-V Series NonfreeKernelModules: zfs zunicode zavl zcommon znvpair Package: linux (not installed) PciMultimedia: ProcFB: 0 astdrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=c61299e4-1f7f-4807-aff6-0a3b4028b88c ro ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 RfKill: Error: [Errno 2] No such file or directory Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 11/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0601 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P9D-V Series dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 17 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0601:bd11/13/2013:svnASUSTeKCOMPUTERINC.:pnP9D-VSeries:pvrRev1.xx:rvnASUSTeKCOMPUTERINC.:rnP9D-VSeries:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct17:cvrToBeFilledByO.E.M.: dmi.product.name: P9D-V Series dmi.product.version: Rev 1.xx dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1378434/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1378434] WifiSyslog.txt
apport information ** Attachment added: WifiSyslog.txt https://bugs.launchpad.net/bugs/1378434/+attachment/4227602/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1378434 Title: 14.04: libvirt-qemu/apparmor: missing permissions for 9p shares Status in “linux” package in Ubuntu: New Bug description: I have an asterisk server running in a KVM and give it access to the storage array of the host via 9p. /etc/apparmor.d/abstractions/libvirt-qemu was missing the permissions for capa fowner and capa fsetid which are necessary for full access to the shares and which I fixed myself. Now, additionally, it seems that the helper for the KVMs only sets r and w permissions for the 9p shares. For full access in this case, also the link permission is needed. Manually adding the l flag to /etc/apparmor.d/libvirt-qemu/UUID.files does NOT work. The permission structure seems to be hardcoded in the source of the helper. Typical log entry: Oct 7 19:04:14 nostromo kernel: [498751.395000] type=1400 audit(1412697854.669:203): apparmor=DENIED operation=link profile =libvirt-d2719da3-1869-9cee-b02f-8d86458bbea2 name=/storage/asterisk/spool/voicemail/default/1102/Old/.lock pid=7775 comm=pool requested_mask=l denied_mask=l fsuid=0 ouid=0 target=/storage/asterisk/spool/voicemail/default/1102/Old/.lock- 0fc30204 Possible solutions: a) Add l permission to the source of the helper b) Un-hardcode the permissions set by the helper and make them configurable through an /etc/default config or similar. This would be a preferable solution. --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Oct 2 00:29 seq crw-rw 1 root audio 116, 33 Oct 2 00:29 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=28b31865-bf30-4c40-a9a6-32d44abec88b InstallationDate: Installed on 2014-08-17 (50 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) MachineType: ASUSTeK COMPUTER INC. P9D-V Series NonfreeKernelModules: zfs zunicode zavl zcommon znvpair Package: linux (not installed) PciMultimedia: ProcFB: 0 astdrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=c61299e4-1f7f-4807-aff6-0a3b4028b88c ro ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 RfKill: Error: [Errno 2] No such file or directory Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 11/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0601 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P9D-V Series dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 17 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0601:bd11/13/2013:svnASUSTeKCOMPUTERINC.:pnP9D-VSeries:pvrRev1.xx:rvnASUSTeKCOMPUTERINC.:rnP9D-VSeries:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct17:cvrToBeFilledByO.E.M.: dmi.product.name: P9D-V Series dmi.product.version: Rev 1.xx dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1378434/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1378434] Lspci.txt
apport information ** Attachment added: Lspci.txt https://bugs.launchpad.net/bugs/1378434/+attachment/4227594/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1378434 Title: 14.04: libvirt-qemu/apparmor: missing permissions for 9p shares Status in “linux” package in Ubuntu: New Bug description: I have an asterisk server running in a KVM and give it access to the storage array of the host via 9p. /etc/apparmor.d/abstractions/libvirt-qemu was missing the permissions for capa fowner and capa fsetid which are necessary for full access to the shares and which I fixed myself. Now, additionally, it seems that the helper for the KVMs only sets r and w permissions for the 9p shares. For full access in this case, also the link permission is needed. Manually adding the l flag to /etc/apparmor.d/libvirt-qemu/UUID.files does NOT work. The permission structure seems to be hardcoded in the source of the helper. Typical log entry: Oct 7 19:04:14 nostromo kernel: [498751.395000] type=1400 audit(1412697854.669:203): apparmor=DENIED operation=link profile =libvirt-d2719da3-1869-9cee-b02f-8d86458bbea2 name=/storage/asterisk/spool/voicemail/default/1102/Old/.lock pid=7775 comm=pool requested_mask=l denied_mask=l fsuid=0 ouid=0 target=/storage/asterisk/spool/voicemail/default/1102/Old/.lock- 0fc30204 Possible solutions: a) Add l permission to the source of the helper b) Un-hardcode the permissions set by the helper and make them configurable through an /etc/default config or similar. This would be a preferable solution. --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Oct 2 00:29 seq crw-rw 1 root audio 116, 33 Oct 2 00:29 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=28b31865-bf30-4c40-a9a6-32d44abec88b InstallationDate: Installed on 2014-08-17 (50 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) MachineType: ASUSTeK COMPUTER INC. P9D-V Series NonfreeKernelModules: zfs zunicode zavl zcommon znvpair Package: linux (not installed) PciMultimedia: ProcFB: 0 astdrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=c61299e4-1f7f-4807-aff6-0a3b4028b88c ro ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 RfKill: Error: [Errno 2] No such file or directory Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 11/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0601 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P9D-V Series dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 17 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0601:bd11/13/2013:svnASUSTeKCOMPUTERINC.:pnP9D-VSeries:pvrRev1.xx:rvnASUSTeKCOMPUTERINC.:rnP9D-VSeries:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct17:cvrToBeFilledByO.E.M.: dmi.product.name: P9D-V Series dmi.product.version: Rev 1.xx dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1378434/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1378434] Re: 14.04: libvirt-qemu/apparmor: missing permissions for 9p shares
That is no kernel bug. It's a bug in libvirt-aa-helper. ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed ** Package changed: linux (Ubuntu) = libvirt (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1378434 Title: 14.04: libvirt-qemu/apparmor: missing permissions for 9p shares Status in “libvirt” package in Ubuntu: Confirmed Bug description: I have an asterisk server running in a KVM and give it access to the storage array of the host via 9p. /etc/apparmor.d/abstractions/libvirt-qemu was missing the permissions for capa fowner and capa fsetid which are necessary for full access to the shares and which I fixed myself. Now, additionally, it seems that the helper for the KVMs only sets r and w permissions for the 9p shares. For full access in this case, also the link permission is needed. Manually adding the l flag to /etc/apparmor.d/libvirt-qemu/UUID.files does NOT work. The permission structure seems to be hardcoded in the source of the helper. Typical log entry: Oct 7 19:04:14 nostromo kernel: [498751.395000] type=1400 audit(1412697854.669:203): apparmor=DENIED operation=link profile =libvirt-d2719da3-1869-9cee-b02f-8d86458bbea2 name=/storage/asterisk/spool/voicemail/default/1102/Old/.lock pid=7775 comm=pool requested_mask=l denied_mask=l fsuid=0 ouid=0 target=/storage/asterisk/spool/voicemail/default/1102/Old/.lock- 0fc30204 Possible solutions: a) Add l permission to the source of the helper b) Un-hardcode the permissions set by the helper and make them configurable through an /etc/default config or similar. This would be a preferable solution. --- AlsaDevices: total 0 crw-rw 1 root audio 116, 1 Oct 2 00:29 seq crw-rw 1 root audio 116, 33 Oct 2 00:29 timer AplayDevices: Error: [Errno 2] No such file or directory ApportVersion: 2.14.1-0ubuntu3.4 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=28b31865-bf30-4c40-a9a6-32d44abec88b InstallationDate: Installed on 2014-08-17 (50 days ago) InstallationMedia: Ubuntu-Server 14.04.1 LTS Trusty Tahr - Release amd64 (20140722.3) MachineType: ASUSTeK COMPUTER INC. P9D-V Series NonfreeKernelModules: zfs zunicode zavl zcommon znvpair Package: linux (not installed) PciMultimedia: ProcFB: 0 astdrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=c61299e4-1f7f-4807-aff6-0a3b4028b88c ro ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 RfKill: Error: [Errno 2] No such file or directory Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 11/13/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0601 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P9D-V Series dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 17 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0601:bd11/13/2013:svnASUSTeKCOMPUTERINC.:pnP9D-VSeries:pvrRev1.xx:rvnASUSTeKCOMPUTERINC.:rnP9D-VSeries:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct17:cvrToBeFilledByO.E.M.: dmi.product.name: P9D-V Series dmi.product.version: Rev 1.xx dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1378434/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1301721] Re: Bluetooth 04ca 300b not working Ubuntu 12.04
The problem persists in kubuntu 14.04. I have an Acer E1-572 laptop with the respective USB chipset and it doesn't work. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1301721 Title: Bluetooth 04ca 300b not working Ubuntu 12.04 Status in “linux” package in Ubuntu: Expired Bug description: Hi, 1. tied download with thelatest FW from below link and copied to /lib/firmware https://launchpad.net/ubuntu/+source/linux-firmware/1.79.2 2. download the compact wireless from belwo link and installed http://linuxwireless.org/en/users/Download/stable/#compat-wireless_3.6_stable_releases pls suggest for a solution. WIFI working but BT not working . Kernen version : 3.11.0 Wifi detected in lspci : AR9565/QCA9565 Regds, Bala S To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1301721/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377261] [NEW] Bluetooth 04ca:300b does not work in 14.04
Public bug reported: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-collected trusty ** Tags added: apport-collected trusty ** Description changed: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb + --- + ApportVersion: 2.14.1-0ubuntu3.5 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC1: sgofferj 2425 F pulseaudio + sgofferj 2632 F pulseaudio + /dev/snd/controlC0: sgofferj 2425 F pulseaudio + sgofferj 2632 F pulseaudio + DistroRelease: Ubuntu 14.04 + InstallationDate: Installed on 2014-07-24 (71 days ago) + InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) + MachineType: Acer Aspire E1-572 + Package: linux (not installed) + ProcFB: 0 inteldrmfb + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 + ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 + PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. + RelatedPackageVersions: + linux-restricted-modules-3.13.0-36-generic N/A + linux-backports-modules-3.13.0-36-generic N/A + linux-firmware 1.127.7 + Tags: trusty + Uname: Linux 3.13.0-36-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: + + _MarkForUpload: True + dmi.bios.date: 10/07/2013
[Kernel-packages] [Bug 1377261] RfKill.txt
apport information ** Attachment added: RfKill.txt https://bugs.launchpad.net/bugs/1377261/+attachment/4223769/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: New Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377261] BootDmesg.txt
apport information ** Attachment added: BootDmesg.txt https://bugs.launchpad.net/bugs/1377261/+attachment/4223759/+files/BootDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: New Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377261] CRDA.txt
apport information ** Attachment added: CRDA.txt https://bugs.launchpad.net/bugs/1377261/+attachment/4223760/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: New Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377261] CurrentDmesg.txt
apport information ** Attachment added: CurrentDmesg.txt https://bugs.launchpad.net/bugs/1377261/+attachment/4223761/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: New Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377261] Lsusb.txt
apport information ** Attachment added: Lsusb.txt https://bugs.launchpad.net/bugs/1377261/+attachment/4223764/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: New Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377261] Lspci.txt
apport information ** Attachment added: Lspci.txt https://bugs.launchpad.net/bugs/1377261/+attachment/4223763/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: New Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377261] ProcModules.txt
apport information ** Attachment added: ProcModules.txt https://bugs.launchpad.net/bugs/1377261/+attachment/4223768/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: New Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377261] ProcInterrupts.txt
apport information ** Attachment added: ProcInterrupts.txt https://bugs.launchpad.net/bugs/1377261/+attachment/4223767/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: New Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377261] IwConfig.txt
apport information ** Attachment added: IwConfig.txt https://bugs.launchpad.net/bugs/1377261/+attachment/4223762/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: New Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377261] AlsaInfo.txt
apport information ** Attachment added: AlsaInfo.txt https://bugs.launchpad.net/bugs/1377261/+attachment/4223758/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: New Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377261] UdevDb.txt
apport information ** Attachment added: UdevDb.txt https://bugs.launchpad.net/bugs/1377261/+attachment/4223770/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: New Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377261] ProcCpuinfo.txt
apport information ** Attachment added: ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1377261/+attachment/4223765/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: New Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377261] ProcEnviron.txt
apport information ** Attachment added: ProcEnviron.txt https://bugs.launchpad.net/bugs/1377261/+attachment/4223766/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: New Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377261] UdevLog.txt
apport information ** Attachment added: UdevLog.txt https://bugs.launchpad.net/bugs/1377261/+attachment/4223771/+files/UdevLog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: New Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377261] WifiSyslog.txt
apport information ** Attachment added: WifiSyslog.txt https://bugs.launchpad.net/bugs/1377261/+attachment/4223772/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: New Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377261] Re: Bluetooth 04ca:300b does not work in 14.04
Joseph: I just recently changed after 19 years from SuSE/Opensuse to Ubuntu. I'm not yet familiar with the Ubuntu biotope. If you need me to test something, please provide some specific instructions what to install and how to install and how to create the test reports you need. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: Confirmed Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377292] [NEW] Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC
Public bug reported: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: New Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G
[Kernel-packages] [Bug 1377261] Re: Bluetooth 04ca:300b does not work in 14.04
I got the Kernel installed and at first glance, bluetooth seems to be working. I will test a bit and report back. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377261 Title: Bluetooth 04ca:300b does not work in 14.04 Status in “linux” package in Ubuntu: Confirmed Bug description: According to system logs / dmesg it appears to be initialized correctly, however, any operation fails. Hardware: Acer Aspire E1-572 Note: That was alredy reported for 12.04 in #1301721 Apport-collect follows. dmeg: [ 15.387677] usb 2-5: New USB device found, idVendor=04ca, idProduct=300b [ 15.387681] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 15.396267] Bluetooth: Core ver 2.17 [ 15.396287] NET: Registered protocol family 31 [ 15.396289] Bluetooth: HCI device and connection manager initialized [ 15.396296] Bluetooth: HCI socket layer initialized [ 15.396298] Bluetooth: L2CAP socket layer initialized [ 15.396302] Bluetooth: SCO socket layer initialized [ 15.398331] usbcore: registered new interface driver btusb --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio /dev/snd/controlC0: sgofferj 2425 F pulseaudio sgofferj 2632 F pulseaudio DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name: EA50_HW dmi.board.vendor: Acer dmi.board.version: V2.10 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnInsydeCorp.:bvrV2.10:bd10/07/2013:svnAcer:pnAspireE1-572:pvrV2.10:rvnAcer:rnEA50_HW:rvrV2.10:cvnAcer:ct10:cvrChassisVersion: dmi.product.name: Aspire E1-572 dmi.product.version: V2.10 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1377261/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1377292] RfKill.txt
apport information ** Attachment added: RfKill.txt https://bugs.launchpad.net/bugs/1377292/+attachment/4223899/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Incomplete Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version:
[Kernel-packages] [Bug 1377292] ProcInterrupts.txt
apport information ** Attachment added: ProcInterrupts.txt https://bugs.launchpad.net/bugs/1377292/+attachment/4223897/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Incomplete Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp.
[Kernel-packages] [Bug 1377292] CurrentDmesg.txt
apport information ** Attachment added: CurrentDmesg.txt https://bugs.launchpad.net/bugs/1377292/+attachment/4223891/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Incomplete Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp.
[Kernel-packages] [Bug 1377292] AlsaInfo.txt
apport information ** Attachment added: AlsaInfo.txt https://bugs.launchpad.net/bugs/1377292/+attachment/4223887/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Incomplete Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp.
[Kernel-packages] [Bug 1377292] Lsusb.txt
apport information ** Attachment added: Lsusb.txt https://bugs.launchpad.net/bugs/1377292/+attachment/4223894/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Incomplete Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version:
[Kernel-packages] [Bug 1377292] CRDA.txt
apport information ** Attachment added: CRDA.txt https://bugs.launchpad.net/bugs/1377292/+attachment/4223890/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Incomplete Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version:
[Kernel-packages] [Bug 1377292] UdevDb.txt
apport information ** Attachment added: UdevDb.txt https://bugs.launchpad.net/bugs/1377292/+attachment/4223900/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Incomplete Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version:
[Kernel-packages] [Bug 1377292] Lspci.txt
apport information ** Attachment added: Lspci.txt https://bugs.launchpad.net/bugs/1377292/+attachment/4223893/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Incomplete Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version:
[Kernel-packages] [Bug 1377292] UdevLog.txt
apport information ** Attachment added: UdevLog.txt https://bugs.launchpad.net/bugs/1377292/+attachment/4223901/+files/UdevLog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Incomplete Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp.
[Kernel-packages] [Bug 1377292] IwConfig.txt
apport information ** Attachment added: IwConfig.txt https://bugs.launchpad.net/bugs/1377292/+attachment/4223892/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Incomplete Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp.
[Kernel-packages] [Bug 1377292] Re: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC
apport information ** Tags added: apport-collected trusty ** Description changed: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. + --- + ApportVersion: 2.14.1-0ubuntu3.5 + Architecture: amd64 + DistroRelease: Ubuntu 14.04 + InstallationDate: Installed on 2014-07-24 (71 days ago) + InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) + Package: linux (not installed) + Tags: trusty + Uname: Linux 3.17.0-031700rc7-generic x86_64 + UnreportableReason: The running kernel is not an Ubuntu kernel + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: + + _MarkForUpload: True ** Attachment added: ProcEnviron.txt https://bugs.launchpad.net/bugs/1377292/+attachment/4223856/+files/ProcEnviron.txt ** Description changed: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [
[Kernel-packages] [Bug 1377292] Re: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC
apport-collect wouldn't work properly with the upstream kernel, so I ran it again with the Ubuntu kernel, which also has the same issues... -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Incomplete Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp.
[Kernel-packages] [Bug 1377292] WifiSyslog.txt
apport information ** Attachment added: WifiSyslog.txt https://bugs.launchpad.net/bugs/1377292/+attachment/4223902/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Incomplete Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp.
[Kernel-packages] [Bug 1377292] ProcCpuinfo.txt
apport information ** Attachment added: ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1377292/+attachment/4223895/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Incomplete Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp.
[Kernel-packages] [Bug 1377292] ProcEnviron.txt
apport information ** Attachment added: ProcEnviron.txt https://bugs.launchpad.net/bugs/1377292/+attachment/4223896/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Incomplete Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp.
[Kernel-packages] [Bug 1377292] AudioDevicesInUse.txt
apport information ** Attachment added: AudioDevicesInUse.txt https://bugs.launchpad.net/bugs/1377292/+attachment/4223888/+files/AudioDevicesInUse.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Incomplete Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde
[Kernel-packages] [Bug 1377292] ProcModules.txt
apport information ** Attachment added: ProcModules.txt https://bugs.launchpad.net/bugs/1377292/+attachment/4223898/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Incomplete Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp.
[Kernel-packages] [Bug 1377292] BootDmesg.txt
apport information ** Attachment added: BootDmesg.txt https://bugs.launchpad.net/bugs/1377292/+attachment/4223889/+files/BootDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Incomplete Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp.
[Kernel-packages] [Bug 1377292] Re: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC
** Changed in: linux (Ubuntu) Status: Incomplete = New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Triaged Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board Asset Tag dmi.board.name:
[Kernel-packages] [Bug 1377292] Re: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC
Email sent to linux-mmc mailing list: http://article.gmane.org/gmane.linux.kernel.mmc/29278 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1377292 Title: Broadcom Corporation BCM57765/57785 SDXC/MMC Card Reader - does not read SDHC Status in “linux” package in Ubuntu: Triaged Bug description: This is a log output from inserting 2 different SDHC cards. Reading MMC and normal SD cards works fine. Oct 3 22:01:55 Andromeda kernel: [ 496.692464] mmc0: new ultra high speed SDR104 SDHC card at address 0007 Oct 3 22:01:55 Andromeda kernel: [ 496.720253] mmcblk0: mmc0:0007 SD8GB 7.42 GiB Oct 3 22:01:55 Andromeda kernel: [ 496.730780] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:05 Andromeda kernel: [ 506.734853] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:05 Andromeda kernel: [ 506.734921] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:05 Andromeda kernel: [ 506.736505] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:05 Andromeda kernel: [ 506.736512] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:05 Andromeda kernel: [ 506.736514] quiet_error: 12 callbacks suppressed Oct 3 22:02:05 Andromeda kernel: [ 506.736516] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737157] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:05 Andromeda kernel: [ 506.737172] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:05 Andromeda kernel: [ 506.737644] mmcblk0: unable to read partition table Oct 3 22:02:31 Andromeda kernel: [ 532.716634] mmc0: card 0007 removed Oct 3 22:02:38 Andromeda kernel: [ 539.648546] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock Oct 3 22:02:38 Andromeda kernel: [ 539.648557] mmc0: new ultra high speed SDR104 SDHC card at address e624 Oct 3 22:02:38 Andromeda kernel: [ 539.648909] mmcblk0: mmc0:e624 SE32G 29.7 GiB Oct 3 22:02:38 Andromeda kernel: [ 539.659087] mmc0: Controller never released inhibit bit(s). Oct 3 22:02:48 Andromeda kernel: [ 549.654964] mmc0: Timeout waiting for hardware interrupt. Oct 3 22:02:48 Andromeda kernel: [ 549.655051] mmcblk0: error -110 sending status command, retrying Oct 3 22:02:48 Andromeda kernel: [ 549.656284] mmcblk0: unknown error -5 sending read/write command, card status 0x900 Oct 3 22:02:48 Andromeda kernel: [ 549.656288] end_request: I/O error, dev mmcblk0, sector 0 Oct 3 22:02:48 Andromeda kernel: [ 549.656290] Buffer I/O error on device mmcblk0, logical block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665078] ldm_validate_partition_table(): Disk read failed. Oct 3 22:02:48 Andromeda kernel: [ 549.665084] Dev mmcblk0: unable to read RDB block 0 Oct 3 22:02:48 Andromeda kernel: [ 549.665399] mmcblk0: unable to read partition table Oct 3 22:02:59 Andromeda kernel: [ 560.661212] nfs: server nostromo OK Oct 3 22:02:59 Andromeda kernel: [ 561.128818] mmc0: card e624 removed Note: I'm already trying upstream kernel. Apport-collect follows. --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) Package: linux (not installed) Tags: trusty Uname: Linux 3.17.0-031700rc7-generic x86_64 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True --- ApportVersion: 2.14.1-0ubuntu3.5 Architecture: amd64 DistroRelease: Ubuntu 14.04 InstallationDate: Installed on 2014-07-24 (71 days ago) InstallationMedia: Kubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140416.1) MachineType: Acer Aspire E1-572 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=8fc8c727-e576-4aaf-b71b-b7d7c305ef4b ro quit splash acpi_osi=Linux acpi_backlight=vendor quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-36.63-generic 3.13.11.6 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.13.0-36-generic N/A linux-backports-modules-3.13.0-36-generic N/A linux-firmware 1.127.7 Tags: trusty Uname: Linux 3.13.0-36-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 10/07/2013 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V2.10 dmi.board.asset.tag: Type2 - Board