[Kernel-packages] [Bug 1614789] [NEW] zfs.target should not require zfs-share.service
Public bug reported: Currently package zfsutils-linux contains systemd target file /lib/systemd/system/zfs.target that specifies following dependencies: Requires=zfs-mount.service Requires=zfs-share.service Wants=zed.service zfs-share.service is not essential in setups where file sharing is not used, or when it is configured without the use of the zfs utility. The user may therefore choose to mask this service. However, doing so has an unexpected and confusing effect, preventing zfs from starting on boot at all. This is because zfs.target is the only zfs-related unit that is wanted by multi-user.target, and if one of its required services is masked, zfs.target is skipped, together with zfs-mount.service. A solution is to replace "Requires=zfs-share.service" with "Wants=zfs- share.service". Steps to reproduce: systemctl mask zfs-share.service reboot Expected results: Module zfs is loaded zfs-mount.service is active and ZFS filesystems are mounted ZFS filesystems are not shared Observed results: Module zfs is not loaded ZFS filesystems are not mounted zpool status produces an error: "The ZFS modules are not loaded. Try running '/sbin/modprobe zfs' as root to load them." $ lsb_release -rd Description:Ubuntu 16.04.1 LTS Release:16.04 $ apt-cache policy zfsutils-linux zfsutils-linux: Installed: 0.6.5.6-0ubuntu10 ** Affects: zfs-linux (Ubuntu) Importance: Undecided Status: New ** Package changed: autofs (Ubuntu) => zfs-linux (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to zfs-linux in Ubuntu. https://bugs.launchpad.net/bugs/1614789 Title: zfs.target should not require zfs-share.service Status in zfs-linux package in Ubuntu: New Bug description: Currently package zfsutils-linux contains systemd target file /lib/systemd/system/zfs.target that specifies following dependencies: Requires=zfs-mount.service Requires=zfs-share.service Wants=zed.service zfs-share.service is not essential in setups where file sharing is not used, or when it is configured without the use of the zfs utility. The user may therefore choose to mask this service. However, doing so has an unexpected and confusing effect, preventing zfs from starting on boot at all. This is because zfs.target is the only zfs-related unit that is wanted by multi-user.target, and if one of its required services is masked, zfs.target is skipped, together with zfs- mount.service. A solution is to replace "Requires=zfs-share.service" with "Wants=zfs-share.service". Steps to reproduce: systemctl mask zfs-share.service reboot Expected results: Module zfs is loaded zfs-mount.service is active and ZFS filesystems are mounted ZFS filesystems are not shared Observed results: Module zfs is not loaded ZFS filesystems are not mounted zpool status produces an error: "The ZFS modules are not loaded. Try running '/sbin/modprobe zfs' as root to load them." $ lsb_release -rd Description:Ubuntu 16.04.1 LTS Release:16.04 $ apt-cache policy zfsutils-linux zfsutils-linux: Installed: 0.6.5.6-0ubuntu10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1614789/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1350480] Re: [REGRESSION] Kernel update renders Intel NUC (i5-3427) unbootable with USB devices plugged in
Joseph, thank you for pointing my attention to this bug. On my hardware (bug 1330530) the problem is not reproducible with kernel 3.13.y, so unfortunately I can neither confirm nor deny whether your test kernel fixes it. However, I would very much like to see the patch being backported to 3.2.y. i.e. Precise. I already tested the patch (modified to keep find_trb_seg) with the upstream (kernel.org) stable 3.2 kernel, and can confirm it fixes the regression. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1350480 Title: [REGRESSION] Kernel update renders Intel NUC (i5-3427) unbootable with USB devices plugged in Status in The Linux Kernel: Unknown Status in “linux” package in Ubuntu: In Progress Status in “linux” source package in Precise: In Progress Status in “linux” source package in Trusty: In Progress Status in “linux” source package in Utopic: In Progress Bug description: The latest kernel update in Ubuntu 14.04 LTS (3.13.0-32.57) renders our Intel NUCs unbootable, when we cold boot and have USB devices (keyboard, mouse, USB/Ethernet adapter) connected. The 3.13.0-24.47 kernel does not exhibit this behavior. Our particular NUCs have the i5-3427U processor, which is the D53427RKE board (DC53427HYE kit). These reports seem to be related: http://support.sundtek.com/index.php/topic,1600.0.html http://en.it-usenet.org/thread/19505/17700/ --- ApportVersion: 2.14.1-0ubuntu3.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1400 F pulseaudio DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=37e4ff56-b945-4604-a94d-557bdf83e0b2 InstallationDate: Installed on 2014-07-30 (0 days ago) InstallationMedia: Ubuntu 14.04 LTS Trusty Tahr - Release amd64 (20140417) Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=c0597da2-7d4a-4340-b85a-c7f96d8262d7 ro ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9 RelatedPackageVersions: linux-restricted-modules-3.13.0-24-generic N/A linux-backports-modules-3.13.0-24-generic N/A linux-firmware 1.127.5 Tags: trusty Uname: Linux 3.13.0-24-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 04/25/2013 dmi.bios.vendor: Intel Corp. dmi.bios.version: RKPPT10H.86A.0017.2013.0425.1251 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: D53427RKE dmi.board.vendor: Intel Corporation dmi.board.version: G87790-403 dmi.chassis.type: 3 dmi.modalias: dmi:bvnIntelCorp.:bvrRKPPT10H.86A.0017.2013.0425.1251:bd04/25/2013:svn:pn:pvr:rvnIntelCorporation:rnD53427RKE:rvrG87790-403:cvn:ct3:cvr: To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1350480/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1333229] Re: USB 3.0 regression after upgrading to 3.2.0-64 kernel
The patch has been added to the upstream mainline kernel 3.17-rc3, and to the 3.16-stable tree. Please see https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1330530/comments/16 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1333229 Title: USB 3.0 regression after upgrading to 3.2.0-64 kernel Status in “linux” package in Ubuntu: Confirmed Bug description: After upgrading to 3.2.0-64 kernel wireless mouse stopped working but keyboard still works Problem occurred with next Wireless Kit (keyboard+mouse): 04f2:1123 Chicony Electronics Co., Ltd Asus Wireless Keyboard and Mouse 04f2:0836 Chicony Electronics Co., Ltd Pleomax Wireless Keyboard and Mouse from dmesg: # dmesg |grep generic-usb [3.043949] generic-usb 0003:04F2:0963.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony 2.4G Multimedia Wireless Kit] on usb-:00:12.0-3/input0 [3.059228] generic-usb 0003:04F2:0963.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Chicony 2.4G Multimedia Wireless Kit] on usb-:00:12.0-3/input1 [ 635.024628] generic-usb 0003:04F2:0836.0003: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 655.024520] generic-usb: probe of 0003:04F2:0836.0004 failed with error -110 [ 680.024656] generic-usb: probe of 0003:04F2:0836.0005 failed with error -110 [ 686.324531] generic-usb 0003:04F2:0836.0006: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 706.324634] generic-usb: probe of 0003:04F2:0836.0007 failed with error -110 [ 731.328465] generic-usb: probe of 0003:04F2:0836.0008 failed with error -110 [ 732.155547] generic-usb 0003:04F2:0836.0009: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 752.156459] generic-usb: probe of 0003:04F2:0836.000A failed with error -110 [ 777.156718] generic-usb: probe of 0003:04F2:0836.000B failed with error -110 [ 1236.880527] generic-usb 0003:04F2:0836.000C: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 1256.880712] generic-usb: probe of 0003:04F2:0836.000D failed with error -110 [ 1281.880705] generic-usb: probe of 0003:04F2:0836.000E failed with error -110 With 3.2.0-63 kernel all works fine ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-64-generic-pae 3.2.0-64.97 ProcVersionSignature: Ubuntu 3.2.0-64.97-generic-pae 3.2.59 Uname: Linux 3.2.0-64-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 1: SB [HDA ATI SB], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC1', '/dev/snd/hwC1D0', '/dev/snd/pcmC1D0c', '/dev/snd/pcmC1D0p', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D3p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Generic'/'HD-Audio Generic at 0xfeb44000 irq 45' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 6 Simple ctrls : 1 Card0.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Card1.Amixer.info: Card hw:1 'SB'/'HDA ATI SB at 0xfeb4 irq 16' Mixer name : 'Realtek ALC269VB' Components : 'HDA:10ec0269,104384ff,00100100' Controls : 18 Simple ctrls : 10 Date: Mon Jun 23 14:48:34 2014 HibernationDevice: RESUME=UUID=f22f0450-8574-4bb3-9992-fde733b437eb MachineType: ASUSTeK Computer INC. ET2012A MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=ru_RU.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-64-generic-pae root=UUID=8e8ca8ab-ae5e-41bc-b008-7a15a613d9e0 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.2.0-64-generic-pae N/A linux-backports-modules-3.2.0-64-generic-pae N/A linux-firmware1.79.14 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/30/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0306 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: ET2012A dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.01G
[Kernel-packages] [Bug 1330530] Re: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller
The patch has been somewhat reworked and added to the upstream mainline kernel 3.17-rc3, and to the 3.16-stable tree. https://lkml.org/lkml/2014/8/29/386 http://www.spinics.net/lists/stable/msg59724.html -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1330530 Title: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller Status in “linux” package in Ubuntu: Confirmed Bug description: With a Dell Vostro 430, the HighPoint RocketU 1144C USB 3.0 controller, Areca ARC-5040 USB 3.0 RAID enclosure connected to it, and the following conditions are met: 1. System booted kernel 3.2.0-64, 2. HighPoint RocketU 1144C controller was installed, 3. Areca ARC-5040 was connected to that controller. An error loop during boot contains the following messages: [ 34.084469] usb 8-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 34.101825] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e000 [ 34.101918] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e040 This continues for about 18 minutes, after which the filesystem on the Areca drive is mounted, and boot process continues successfully, as if nothing had happened. Afterwards the affected drive works seemingly fine, although I experienced some system instability, causing a total system freeze. At this point I am not sure if this instability is related to the problem at hand. I've attached a file generated by apport-cli -f -p linux --save filename.apport . The problem did not appear if I booted an older kernel (e.g. 3.2.0-63), or if Areca enclosure was not attached, or if it was attached using another interface (USB2 or eSATA). The problem was also absent if I replaced the Areca enclosure with another USB3 device (a flash drive). The test machine's motherboard did not have a built-in USB3 controller, but I performed an additional test on yet another computer, equipped with a NEC USB3 controller. That test was done with kernel 3.2.0-64 and the Areca enclosure, and did not replicate the problem. Thus I assume that it is the combination of the RocketU controller and a specific USB3 device that triggers kernel regression. Similar effects happen if Areca enclosure is hot-plugged to the working system. In such a case OS boots fine (as the enclosure is absent during boot). After plugging the Areca, the drive is unavailable for 18 minutes, during which time numerous errors as above are logged. After 18 minutes elapse, drive is mounted and behaves normally. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1330530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1333229] Re: USB 3.0 regression after upgrading to 3.2.0-64 kernel
Problem has been identified and patch created. Please see the following link for details: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1330530/comments/15 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1333229 Title: USB 3.0 regression after upgrading to 3.2.0-64 kernel Status in “linux” package in Ubuntu: Confirmed Bug description: After upgrading to 3.2.0-64 kernel wireless mouse stopped working but keyboard still works Problem occurred with next Wireless Kit (keyboard+mouse): 04f2:1123 Chicony Electronics Co., Ltd Asus Wireless Keyboard and Mouse 04f2:0836 Chicony Electronics Co., Ltd Pleomax Wireless Keyboard and Mouse from dmesg: # dmesg |grep generic-usb [3.043949] generic-usb 0003:04F2:0963.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony 2.4G Multimedia Wireless Kit] on usb-:00:12.0-3/input0 [3.059228] generic-usb 0003:04F2:0963.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Chicony 2.4G Multimedia Wireless Kit] on usb-:00:12.0-3/input1 [ 635.024628] generic-usb 0003:04F2:0836.0003: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 655.024520] generic-usb: probe of 0003:04F2:0836.0004 failed with error -110 [ 680.024656] generic-usb: probe of 0003:04F2:0836.0005 failed with error -110 [ 686.324531] generic-usb 0003:04F2:0836.0006: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 706.324634] generic-usb: probe of 0003:04F2:0836.0007 failed with error -110 [ 731.328465] generic-usb: probe of 0003:04F2:0836.0008 failed with error -110 [ 732.155547] generic-usb 0003:04F2:0836.0009: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 752.156459] generic-usb: probe of 0003:04F2:0836.000A failed with error -110 [ 777.156718] generic-usb: probe of 0003:04F2:0836.000B failed with error -110 [ 1236.880527] generic-usb 0003:04F2:0836.000C: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 1256.880712] generic-usb: probe of 0003:04F2:0836.000D failed with error -110 [ 1281.880705] generic-usb: probe of 0003:04F2:0836.000E failed with error -110 With 3.2.0-63 kernel all works fine ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-64-generic-pae 3.2.0-64.97 ProcVersionSignature: Ubuntu 3.2.0-64.97-generic-pae 3.2.59 Uname: Linux 3.2.0-64-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 1: SB [HDA ATI SB], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC1', '/dev/snd/hwC1D0', '/dev/snd/pcmC1D0c', '/dev/snd/pcmC1D0p', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D3p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Generic'/'HD-Audio Generic at 0xfeb44000 irq 45' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 6 Simple ctrls : 1 Card0.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Card1.Amixer.info: Card hw:1 'SB'/'HDA ATI SB at 0xfeb4 irq 16' Mixer name : 'Realtek ALC269VB' Components : 'HDA:10ec0269,104384ff,00100100' Controls : 18 Simple ctrls : 10 Date: Mon Jun 23 14:48:34 2014 HibernationDevice: RESUME=UUID=f22f0450-8574-4bb3-9992-fde733b437eb MachineType: ASUSTeK Computer INC. ET2012A MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=ru_RU.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-64-generic-pae root=UUID=8e8ca8ab-ae5e-41bc-b008-7a15a613d9e0 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.2.0-64-generic-pae N/A linux-backports-modules-3.2.0-64-generic-pae N/A linux-firmware1.79.14 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/30/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0306 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: ET2012A dmi.board.vendor: ASUSTeK Computer INC. dmi.board.version: Rev 1.01G
[Kernel-packages] [Bug 1330530] Re: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller
Julius Werner, the author of the commit in question, has found the problem and created a patch. The problem is in the place that I identified, but specific regression-triggering details are different that I originally thought. The patch is available here: https://lkml.org/lkml/2014/7/8/571 I tested this patch and can confirm that it fixes the regression in kernel 3.2.x. Newer kernels have not been affected by the regression, as it is masked by another code change that has not been backported to 3.2. Here is the link for the discussion: http://thread.gmane.org/gmane.linux.usb.general/110685 As I understand it, we are now waiting for Julius' patch to be pulled to the mainline kernel. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1330530 Title: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller Status in “linux” package in Ubuntu: Confirmed Bug description: With a Dell Vostro 430, the HighPoint RocketU 1144C USB 3.0 controller, Areca ARC-5040 USB 3.0 RAID enclosure connected to it, and the following conditions are met: 1. System booted kernel 3.2.0-64, 2. HighPoint RocketU 1144C controller was installed, 3. Areca ARC-5040 was connected to that controller. An error loop during boot contains the following messages: [ 34.084469] usb 8-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 34.101825] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e000 [ 34.101918] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e040 This continues for about 18 minutes, after which the filesystem on the Areca drive is mounted, and boot process continues successfully, as if nothing had happened. Afterwards the affected drive works seemingly fine, although I experienced some system instability, causing a total system freeze. At this point I am not sure if this instability is related to the problem at hand. I've attached a file generated by apport-cli -f -p linux --save filename.apport . The problem did not appear if I booted an older kernel (e.g. 3.2.0-63), or if Areca enclosure was not attached, or if it was attached using another interface (USB2 or eSATA). The problem was also absent if I replaced the Areca enclosure with another USB3 device (a flash drive). The test machine's motherboard did not have a built-in USB3 controller, but I performed an additional test on yet another computer, equipped with a NEC USB3 controller. That test was done with kernel 3.2.0-64 and the Areca enclosure, and did not replicate the problem. Thus I assume that it is the combination of the RocketU controller and a specific USB3 device that triggers kernel regression. Similar effects happen if Areca enclosure is hot-plugged to the working system. In such a case OS boots fine (as the enclosure is absent during boot). After plugging the Areca, the drive is unavailable for 18 minutes, during which time numerous errors as above are logged. After 18 minutes elapse, drive is mounted and behaves normally. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1330530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1330530] Re: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller
I think that I may have found the bug, and since the newest upstream kernel 3.16.0-rc3 has the affected code essentially unmodified, I contacted the maintainer of the XHCI driver and the author of the problematic commit. I also asked for help on linux-usb kernel mailing list: http://permalink.gmane.org/gmane.linux.usb.general/110685 http://www.spinics.net/lists/linux-usb/msg109949.html -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1330530 Title: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller Status in “linux” package in Ubuntu: Confirmed Bug description: With a Dell Vostro 430, the HighPoint RocketU 1144C USB 3.0 controller, Areca ARC-5040 USB 3.0 RAID enclosure connected to it, and the following conditions are met: 1. System booted kernel 3.2.0-64, 2. HighPoint RocketU 1144C controller was installed, 3. Areca ARC-5040 was connected to that controller. An error loop during boot contains the following messages: [ 34.084469] usb 8-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 34.101825] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e000 [ 34.101918] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e040 This continues for about 18 minutes, after which the filesystem on the Areca drive is mounted, and boot process continues successfully, as if nothing had happened. Afterwards the affected drive works seemingly fine, although I experienced some system instability, causing a total system freeze. At this point I am not sure if this instability is related to the problem at hand. I've attached a file generated by apport-cli -f -p linux --save filename.apport . The problem did not appear if I booted an older kernel (e.g. 3.2.0-63), or if Areca enclosure was not attached, or if it was attached using another interface (USB2 or eSATA). The problem was also absent if I replaced the Areca enclosure with another USB3 device (a flash drive). The test machine's motherboard did not have a built-in USB3 controller, but I performed an additional test on yet another computer, equipped with a NEC USB3 controller. That test was done with kernel 3.2.0-64 and the Areca enclosure, and did not replicate the problem. Thus I assume that it is the combination of the RocketU controller and a specific USB3 device that triggers kernel regression. Similar effects happen if Areca enclosure is hot-plugged to the working system. In such a case OS boots fine (as the enclosure is absent during boot). After plugging the Areca, the drive is unavailable for 18 minutes, during which time numerous errors as above are logged. After 18 minutes elapse, drive is mounted and behaves normally. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1330530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1330530] Re: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller
Christopher, due to the nature of this bug, I cannot perform the reverse bisect. I explained it already in comment #8. Just to be clearer: the regression has not been fixed upstream. There is no 3.x kernel branch which would contain the regression and the subsequent fix. The regression either is not there at all (all branches except 3.2), or remains unfixed (3.2). Thus I have no target for the bisection. On somewhat happier news, I have spent last few days debugging the kernel, and I got some results. Specifically, I have a patch that fixes regression on 3.2.0-64 running on a particular hardware. The patch is rather ugly, and will probably cause problems on other hardware, but at least it shows some direction. I will gladly discuss this matter, but I will need a little more attention shown by Ubuntu maintainers. Each of my posts corresponds to many hours of my work, and while I am grateful for any attention, its current level does not permit a constructive dialogue. I am very sorry to say this, and I mean no offense, but I will put more effort into writing here only when I see a chance that someone will read it. ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed ** Tags removed: kernel-fixed-upstream-3.16-rc1 needs-reverse-bisect -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1330530 Title: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller Status in “linux” package in Ubuntu: Confirmed Bug description: With a Dell Vostro 430, the HighPoint RocketU 1144C USB 3.0 controller, Areca ARC-5040 USB 3.0 RAID enclosure connected to it, and the following conditions are met: 1. System booted kernel 3.2.0-64, 2. HighPoint RocketU 1144C controller was installed, 3. Areca ARC-5040 was connected to that controller. An error loop during boot contains the following messages: [ 34.084469] usb 8-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 34.101825] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e000 [ 34.101918] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e040 This continues for about 18 minutes, after which the filesystem on the Areca drive is mounted, and boot process continues successfully, as if nothing had happened. Afterwards the affected drive works seemingly fine, although I experienced some system instability, causing a total system freeze. At this point I am not sure if this instability is related to the problem at hand. I've attached a file generated by apport-cli -f -p linux --save filename.apport . The problem did not appear if I booted an older kernel (e.g. 3.2.0-63), or if Areca enclosure was not attached, or if it was attached using another interface (USB2 or eSATA). The problem was also absent if I replaced the Areca enclosure with another USB3 device (a flash drive). The test machine's motherboard did not have a built-in USB3 controller, but I performed an additional test on yet another computer, equipped with a NEC USB3 controller. That test was done with kernel 3.2.0-64 and the Areca enclosure, and did not replicate the problem. Thus I assume that it is the combination of the RocketU controller and a specific USB3 device that triggers kernel regression. Similar effects happen if Areca enclosure is hot-plugged to the working system. In such a case OS boots fine (as the enclosure is absent during boot). After plugging the Areca, the drive is unavailable for 18 minutes, during which time numerous errors as above are logged. After 18 minutes elapse, drive is mounted and behaves normally. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1330530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1333229] Re: USB 3.0 regression after upgrading to 3.2.0-64 kernel
This is interesting: [ 4650.205313] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep f3133600 [ 4650.205329] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep f313362c I am getting the same errors with most USB 3.0 devices that I tried. These errors come after a ~15 second delay, and this repeats in a loop for 18 minutes. Some other errors may also be thrown, usually related to udev or various timeouts. However, with the USB3 SD reader that I tested, the errors came only once during boot, with only ~15 second total delay, and the boot then proceeded successfully, although the device subsequently did not work. This matches your observations. This all suggests that we are experiencing the same root problem.. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1333229 Title: USB 3.0 regression after upgrading to 3.2.0-64 kernel Status in “linux” package in Ubuntu: Confirmed Bug description: After upgrading to 3.2.0-64 kernel wireless mouse stopped working but keyboard still works Problem occurred with next Wireless Kit (keyboard+mouse): 04f2:1123 Chicony Electronics Co., Ltd Asus Wireless Keyboard and Mouse 04f2:0836 Chicony Electronics Co., Ltd Pleomax Wireless Keyboard and Mouse from dmesg: # dmesg |grep generic-usb [3.043949] generic-usb 0003:04F2:0963.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony 2.4G Multimedia Wireless Kit] on usb-:00:12.0-3/input0 [3.059228] generic-usb 0003:04F2:0963.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Chicony 2.4G Multimedia Wireless Kit] on usb-:00:12.0-3/input1 [ 635.024628] generic-usb 0003:04F2:0836.0003: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 655.024520] generic-usb: probe of 0003:04F2:0836.0004 failed with error -110 [ 680.024656] generic-usb: probe of 0003:04F2:0836.0005 failed with error -110 [ 686.324531] generic-usb 0003:04F2:0836.0006: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 706.324634] generic-usb: probe of 0003:04F2:0836.0007 failed with error -110 [ 731.328465] generic-usb: probe of 0003:04F2:0836.0008 failed with error -110 [ 732.155547] generic-usb 0003:04F2:0836.0009: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 752.156459] generic-usb: probe of 0003:04F2:0836.000A failed with error -110 [ 777.156718] generic-usb: probe of 0003:04F2:0836.000B failed with error -110 [ 1236.880527] generic-usb 0003:04F2:0836.000C: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 1256.880712] generic-usb: probe of 0003:04F2:0836.000D failed with error -110 [ 1281.880705] generic-usb: probe of 0003:04F2:0836.000E failed with error -110 With 3.2.0-63 kernel all works fine ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-64-generic-pae 3.2.0-64.97 ProcVersionSignature: Ubuntu 3.2.0-64.97-generic-pae 3.2.59 Uname: Linux 3.2.0-64-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 1: SB [HDA ATI SB], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC1', '/dev/snd/hwC1D0', '/dev/snd/pcmC1D0c', '/dev/snd/pcmC1D0p', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D3p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Generic'/'HD-Audio Generic at 0xfeb44000 irq 45' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 6 Simple ctrls : 1 Card0.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Card1.Amixer.info: Card hw:1 'SB'/'HDA ATI SB at 0xfeb4 irq 16' Mixer name : 'Realtek ALC269VB' Components : 'HDA:10ec0269,104384ff,00100100' Controls : 18 Simple ctrls : 10 Date: Mon Jun 23 14:48:34 2014 HibernationDevice: RESUME=UUID=f22f0450-8574-4bb3-9992-fde733b437eb MachineType: ASUSTeK Computer INC. ET2012A MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=ru_RU.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-64-generic-pae root=UUID=8e8ca8ab-ae5e-41bc-b008-7a15a613d9e0 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code
[Kernel-packages] [Bug 1330530] Re: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller
** Tags removed: needs-reverse-bisect ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1330530 Title: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller Status in “linux” package in Ubuntu: Confirmed Bug description: With a Dell Vostro 430, the HighPoint RocketU 1144C USB 3.0 controller, Areca ARC-5040 USB 3.0 RAID enclosure connected to it, and the following conditions are met: 1. System booted kernel 3.2.0-64, 2. HighPoint RocketU 1144C controller was installed, 3. Areca ARC-5040 was connected to that controller. An error loop during boot contains the following messages: [ 34.084469] usb 8-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 34.101825] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e000 [ 34.101918] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e040 This continues for about 18 minutes, after which the filesystem on the Areca drive is mounted, and boot process continues successfully, as if nothing had happened. Afterwards the affected drive works seemingly fine, although I experienced some system instability, causing a total system freeze. At this point I am not sure if this instability is related to the problem at hand. I've attached a file generated by apport-cli -f -p linux --save filename.apport . The problem did not appear if I booted an older kernel (e.g. 3.2.0-63), or if Areca enclosure was not attached, or if it was attached using another interface (USB2 or eSATA). The problem was also absent if I replaced the Areca enclosure with another USB3 device (a flash drive). The test machine's motherboard did not have a built-in USB3 controller, but I performed an additional test on yet another computer, equipped with a NEC USB3 controller. That test was done with kernel 3.2.0-64 and the Areca enclosure, and did not replicate the problem. Thus I assume that it is the combination of the RocketU controller and a specific USB3 device that triggers kernel regression. Similar effects happen if Areca enclosure is hot-plugged to the working system. In such a case OS boots fine (as the enclosure is absent during boot). After plugging the Areca, the drive is unavailable for 18 minutes, during which time numerous errors as above are logged. After 18 minutes elapse, drive is mounted and behaves normally. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1330530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1333229] Re: USB 3.0 regression after upgrading to 3.2.0-64 kernel
Roman, compared to bugs 1330530 and 1328984, you have a similar USB 3.0 controller: ASM1042 (this bug) vs ASM1042A (other bugs). So this may be the same issue. Would you be able to test the regression with other USB devices? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1333229 Title: USB 3.0 regression after upgrading to 3.2.0-64 kernel Status in “linux” package in Ubuntu: Confirmed Bug description: After upgrading to 3.2.0-64 kernel wireless mouse stopped working but keyboard still works Problem occurred with next Wireless Kit (keyboard+mouse): 04f2:1123 Chicony Electronics Co., Ltd Asus Wireless Keyboard and Mouse 04f2:0836 Chicony Electronics Co., Ltd Pleomax Wireless Keyboard and Mouse from dmesg: # dmesg |grep generic-usb [3.043949] generic-usb 0003:04F2:0963.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony 2.4G Multimedia Wireless Kit] on usb-:00:12.0-3/input0 [3.059228] generic-usb 0003:04F2:0963.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Chicony 2.4G Multimedia Wireless Kit] on usb-:00:12.0-3/input1 [ 635.024628] generic-usb 0003:04F2:0836.0003: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 655.024520] generic-usb: probe of 0003:04F2:0836.0004 failed with error -110 [ 680.024656] generic-usb: probe of 0003:04F2:0836.0005 failed with error -110 [ 686.324531] generic-usb 0003:04F2:0836.0006: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 706.324634] generic-usb: probe of 0003:04F2:0836.0007 failed with error -110 [ 731.328465] generic-usb: probe of 0003:04F2:0836.0008 failed with error -110 [ 732.155547] generic-usb 0003:04F2:0836.0009: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 752.156459] generic-usb: probe of 0003:04F2:0836.000A failed with error -110 [ 777.156718] generic-usb: probe of 0003:04F2:0836.000B failed with error -110 [ 1236.880527] generic-usb 0003:04F2:0836.000C: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 1256.880712] generic-usb: probe of 0003:04F2:0836.000D failed with error -110 [ 1281.880705] generic-usb: probe of 0003:04F2:0836.000E failed with error -110 With 3.2.0-63 kernel all works fine ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-64-generic-pae 3.2.0-64.97 ProcVersionSignature: Ubuntu 3.2.0-64.97-generic-pae 3.2.59 Uname: Linux 3.2.0-64-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 1: SB [HDA ATI SB], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC1', '/dev/snd/hwC1D0', '/dev/snd/pcmC1D0c', '/dev/snd/pcmC1D0p', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D3p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Generic'/'HD-Audio Generic at 0xfeb44000 irq 45' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 6 Simple ctrls : 1 Card0.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Card1.Amixer.info: Card hw:1 'SB'/'HDA ATI SB at 0xfeb4 irq 16' Mixer name : 'Realtek ALC269VB' Components : 'HDA:10ec0269,104384ff,00100100' Controls : 18 Simple ctrls : 10 Date: Mon Jun 23 14:48:34 2014 HibernationDevice: RESUME=UUID=f22f0450-8574-4bb3-9992-fde733b437eb MachineType: ASUSTeK Computer INC. ET2012A MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=ru_RU.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-64-generic-pae root=UUID=8e8ca8ab-ae5e-41bc-b008-7a15a613d9e0 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.2.0-64-generic-pae N/A linux-backports-modules-3.2.0-64-generic-pae N/A linux-firmware1.79.14 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 12/30/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0306 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: ET2012A dmi.board.vendor: ASUSTeK
[Kernel-packages] [Bug 1333229] Re: USB 3.0 regression after upgrading to 3.2.0-64 kernel
I'm trying to find similarities between this bug and the bugs I reported. Speaking about the devices mentioned above, but only those that cause problems: 1. Is any a USB 3.0 device? 2. If you boot with any of the problematic devices plugged in, do you experience boot problems of any kind (stuck, long delay, dropped to boot console, etc.)? 3. Does any of the problematic devices work after you give it sufficient time (in my testing, most devices would work after being plugged in for 18 minutes). 4. Do the error messages differ among problematic devices? Thanks. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1333229 Title: USB 3.0 regression after upgrading to 3.2.0-64 kernel Status in “linux” package in Ubuntu: Confirmed Bug description: After upgrading to 3.2.0-64 kernel wireless mouse stopped working but keyboard still works Problem occurred with next Wireless Kit (keyboard+mouse): 04f2:1123 Chicony Electronics Co., Ltd Asus Wireless Keyboard and Mouse 04f2:0836 Chicony Electronics Co., Ltd Pleomax Wireless Keyboard and Mouse from dmesg: # dmesg |grep generic-usb [3.043949] generic-usb 0003:04F2:0963.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony 2.4G Multimedia Wireless Kit] on usb-:00:12.0-3/input0 [3.059228] generic-usb 0003:04F2:0963.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Chicony 2.4G Multimedia Wireless Kit] on usb-:00:12.0-3/input1 [ 635.024628] generic-usb 0003:04F2:0836.0003: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 655.024520] generic-usb: probe of 0003:04F2:0836.0004 failed with error -110 [ 680.024656] generic-usb: probe of 0003:04F2:0836.0005 failed with error -110 [ 686.324531] generic-usb 0003:04F2:0836.0006: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 706.324634] generic-usb: probe of 0003:04F2:0836.0007 failed with error -110 [ 731.328465] generic-usb: probe of 0003:04F2:0836.0008 failed with error -110 [ 732.155547] generic-usb 0003:04F2:0836.0009: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 752.156459] generic-usb: probe of 0003:04F2:0836.000A failed with error -110 [ 777.156718] generic-usb: probe of 0003:04F2:0836.000B failed with error -110 [ 1236.880527] generic-usb 0003:04F2:0836.000C: input,hidraw2: USB HID v1.11 Keyboard [Chicony Samsung 2.4GHz Transceiver] on usb-:05:00.0-2/input0 [ 1256.880712] generic-usb: probe of 0003:04F2:0836.000D failed with error -110 [ 1281.880705] generic-usb: probe of 0003:04F2:0836.000E failed with error -110 With 3.2.0-63 kernel all works fine ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-64-generic-pae 3.2.0-64.97 ProcVersionSignature: Ubuntu 3.2.0-64.97-generic-pae 3.2.59 Uname: Linux 3.2.0-64-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu17.6 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 1: SB [HDA ATI SB], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC1', '/dev/snd/hwC1D0', '/dev/snd/pcmC1D0c', '/dev/snd/pcmC1D0p', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D3p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Generic'/'HD-Audio Generic at 0xfeb44000 irq 45' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 6 Simple ctrls : 1 Card0.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Card1.Amixer.info: Card hw:1 'SB'/'HDA ATI SB at 0xfeb4 irq 16' Mixer name : 'Realtek ALC269VB' Components : 'HDA:10ec0269,104384ff,00100100' Controls : 18 Simple ctrls : 10 Date: Mon Jun 23 14:48:34 2014 HibernationDevice: RESUME=UUID=f22f0450-8574-4bb3-9992-fde733b437eb MachineType: ASUSTeK Computer INC. ET2012A MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=ru_RU.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-64-generic-pae root=UUID=8e8ca8ab-ae5e-41bc-b008-7a15a613d9e0 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-3.2.0-64-generic-pae N/A linux-backports-modules-3.2.0-64-generic-pae N/A
[Kernel-packages] [Bug 1330530] Re: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller
After testing this thoroughly, I am confident to say that the regression is caused by commit usb: xhci: Prefer endpoint context dequeue pointer over stopped_trb. In ubuntu-precise git repository this is commit f04e4b02bce3a0ce19f9673bbefde9b8c624c00a. However, an equivalent commit is part of mainline kernel v3.16-rc1, where it does not cause problems. My guess is that this commit revealed a bug hidden somewhere else, in a code that was modified since kernel 3.2. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1330530 Title: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller Status in “linux” package in Ubuntu: Incomplete Bug description: With a Dell Vostro 430, the HighPoint RocketU 1144C USB 3.0 controller, Areca ARC-5040 USB 3.0 RAID enclosure connected to it, and the following conditions are met: 1. System booted kernel 3.2.0-64, 2. HighPoint RocketU 1144C controller was installed, 3. Areca ARC-5040 was connected to that controller. An error loop during boot contains the following messages: [ 34.084469] usb 8-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 34.101825] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e000 [ 34.101918] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e040 This continues for about 18 minutes, after which the filesystem on the Areca drive is mounted, and boot process continues successfully, as if nothing had happened. Afterwards the affected drive works seemingly fine, although I experienced some system instability, causing a total system freeze. At this point I am not sure if this instability is related to the problem at hand. I've attached a file generated by apport-cli -f -p linux --save filename.apport . The problem did not appear if I booted an older kernel (e.g. 3.2.0-63), or if Areca enclosure was not attached, or if it was attached using another interface (USB2 or eSATA). The problem was also absent if I replaced the Areca enclosure with another USB3 device (a flash drive). The test machine's motherboard did not have a built-in USB3 controller, but I performed an additional test on yet another computer, equipped with a NEC USB3 controller. That test was done with kernel 3.2.0-64 and the Areca enclosure, and did not replicate the problem. Thus I assume that it is the combination of the RocketU controller and a specific USB3 device that triggers kernel regression. Similar effects happen if Areca enclosure is hot-plugged to the working system. In such a case OS boots fine (as the enclosure is absent during boot). After plugging the Areca, the drive is unavailable for 18 minutes, during which time numerous errors as above are logged. After 18 minutes elapse, drive is mounted and behaves normally. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1330530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1330530] Re: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller
I bisected commits between Ubuntu-3.2.0-63.95 and Ubuntu-3.2.0-64.97, and arrived at a specific xhci-related commit. However, manual modification of the relevant file to revert the effects of this commit yielded a kernel that still suffered from a regression. Further complicating the matter is the fact that the the code in question is modified by two commits. Since I was not able to verify the result of bisection, I am not posting it, to avoid confusion. Next week I will further debug the code, and post here when I get conclusive results. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1330530 Title: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller Status in “linux” package in Ubuntu: Incomplete Bug description: With a Dell Vostro 430, the HighPoint RocketU 1144C USB 3.0 controller, Areca ARC-5040 USB 3.0 RAID enclosure connected to it, and the following conditions are met: 1. System booted kernel 3.2.0-64, 2. HighPoint RocketU 1144C controller was installed, 3. Areca ARC-5040 was connected to that controller. An error loop during boot contains the following messages: [ 34.084469] usb 8-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 34.101825] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e000 [ 34.101918] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e040 This continues for about 18 minutes, after which the filesystem on the Areca drive is mounted, and boot process continues successfully, as if nothing had happened. Afterwards the affected drive works seemingly fine, although I experienced some system instability, causing a total system freeze. At this point I am not sure if this instability is related to the problem at hand. I've attached a file generated by apport-cli -f -p linux --save filename.apport . The problem did not appear if I booted an older kernel (e.g. 3.2.0-63), or if Areca enclosure was not attached, or if it was attached using another interface (USB2 or eSATA). The problem was also absent if I replaced the Areca enclosure with another USB3 device (a flash drive). The test machine's motherboard did not have a built-in USB3 controller, but I performed an additional test on yet another computer, equipped with a NEC USB3 controller. That test was done with kernel 3.2.0-64 and the Areca enclosure, and did not replicate the problem. Thus I assume that it is the combination of the RocketU controller and a specific USB3 device that triggers kernel regression. Similar effects happen if Areca enclosure is hot-plugged to the working system. In such a case OS boots fine (as the enclosure is absent during boot). After plugging the Areca, the drive is unavailable for 18 minutes, during which time numerous errors as above are logged. After 18 minutes elapse, drive is mounted and behaves normally. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1330530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1328984] Re: [Dell PowerEdge R510] Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card
tl;dr: This bug report is a duplicate of bug 1330530. I am going to focus my efforts on bug 1330530, and I do not intend to do any work on this bug report until bug 1330530 is resolved. This is because doing the same work twice is not a good use of time and effort of anybody involved. Please do not change the status to incomplete, and do not request same steps or actions as for bug 1330530. Instead, please mark this bug as a duplicate of 1330530. This will focus everybody's attention on the problem and minimize confusion. Thank you. ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1328984 Title: [Dell PowerEdge R510] Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card Status in “linux” package in Ubuntu: Confirmed Bug description: A routine system update of Ubuntu 12.04 LTS to kernel 3.2.0-64 resulted in unbootable system on two machines. Further testing revealed that kernel fails while initializing HighPoint RocketU 1144C USB 3.0 controller. This is a PCIe x4 add-in card that contains four USB 3.0 ports, each equipped with its own controller. The card did and does work without any problems with kernel 3.2.0-63 and earlier. Prior to installing kernel 3.2.0-64 there were neither hardware nor software problems with either of the machines. Steps to reproduce: apt-get dist-upgrade sync reboot Result: system fails to boot. The workaround is to revert to kernel 3.2.0-63 or to remove the RocketU card. Hardware description (same on both machines): Dell PowerEdge R510 PERC6/i RAID controller 64GB RAM DDR3 ECC registered Dual CPU: Intel Xeon X5660 2.80GHz HighPoint RocketU 1144C 4-Port USB 3.0 PCIe 2.0 x4 HBA Operating system (identical on both machines): Ubuntu 12.04.4 LTS Linux 3.2.0-64-generic x86_64 Drives: sda - logical drive on PERC6/i, OS sdb - logical drive on PERC6/i, data sdc - Areca 5040 external RAID connected by USB3 to RocketU card sdd - Areca 5040 external RAID connected by USB3 to RocketU card sde - Areca 5040 external RAID connected by USB3 to RocketU card Symptoms: System boots normally until initialization of Areca drives connected to the RocketU card. The following messages are displayed on screen when booting without quiet and with debug options. These are last messages of a typical part of the boot sequence. Following it is a ~2 minute lag when no messages are displayed. [Please note that no trace of the boot progress gets recorded in system logs, and messages on screen scroll very fast. I had to record the boot progress with a high framerate camera, and even so some messages scrolled too fast and were not recorded. The following is a manual transcript of fragments of these videos; please forgive inevitable typos.] [5.621523] scsi 5:0:0:0: Direct-Access Areca Areca5 PQ: 0 ANSI: 5 [5.622896] sd 5:0:0:0: Attached scsi generic sg4 type 0 [5.623230] sd 5:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16). [5.623668] sd 5:0:0:0: [sdc] 41015622144 512-byte logical blocks: (20.9 TB/19.0 TiB) [5.741152] scsi 6:0:0:0: Direct-Access Areca Areca3 PQ: 0 ANSI: 5 [5.744003] sd 6:0:0:0: Attached scsi generic sg5 type 0 [5.744545] sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). [5.744980] sd 6:0:0:0: [sdd] 41015622144 512-byte logical blocks: (20.9 TB/19.0 TiB) [6.004526] scsi76:0:0:0: Direct-Access Areca Areca7 PQ: 0 ANSI: 5 [6.006121] sd 7:0:0:0: Attached scsi generic sg6 type 0 [6.006488] sd 7:0:0:0: [sde] Very big device. Trying to use READ CAPACITY(16). [6.006834] sd 7:0:0:0: [sde] 35156217552 512-byte logical blocks: (17.9 TB/16.3 TiB) [7.133091] Adding 46874620k swap on /dev/sda3. Priority: -1 extents:1 across 46874620k After a two minute delay, the following messages appear in an infinite loop. Please note that these messages appear in a somewhat random sequence, and not all messages appear on every boot. The only thing that works at this point is Ctrl-Alt-Delete. udevd[632]: timeout: killing '/sbin/modprobe -bv acpi:ACPI000D:PMP0C01:' [774] udevd[703]: timeout: killing '/sbin/modprobe -bv acpi:PMP0C014:' [776] udevd[529]: timeout: killing '/sbin/modprobe -bv input:b0003v0557p2261e0110-e0,1,2,3,4,k110,111,112,r8,a0,1,m4,lsfw' [1642] udevd[630]: timeout: killing '/sbin/modprobe -bv serio:ty06pr00id00ex00' [655] udevd[508]: timeout: killing '/sbin/modprobe -bv pci:v80864342Esvsdbc00sc00i00' [512] udevd[494]: timeout: killing '/sbin/modprobe -bv input:b0019vp0001e-r0,1,k74,ramlsfw' [771] udevd[699]: timeout: killing '/sbin/modprobe -bv dmi:bvnDellInc.:bvr1.12.0:bd07/26/2013:svnDellInc.:pnPowerEdgeR510:pvr:rvnDellInc.:rm00HDP0:rvr002:cvnDellInc.:ct23:cvr:' [708] udevd[529]: timeout: killing
[Kernel-packages] [Bug 1330530] Re: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller
I have tested 28 mainline kernels from 9 branches currently maintained (3.2, 3.4, 3.10, 3.11, 3.12, 3.13, 3.14, 3.15, 3.16), focusing on those that were built around the time the problematic commit was introduced (May-June 2014). The bug appears to affect the 3.2 branch exclusively. Thus I will now try to forward bisect commits from 3.2.58 (last good) to 3.2.59 (first bad). Just for reference, here are results of my testing. Bad means that bug was reproducible in the given kernel, good that it was not. 3.2.58 good 3.2.59 bad 3.2.60 bad 3.4.89 good 3.4.90 good 3.4.91 good 3.4.92 good 3.4.93 good 3.4.94 good 3.10.44 good 3.11.10.11 good 3.13.22 good 3.13.11 good 3.13.11.1 good 3.13.11.2 good 3.13.11.3 good 3.14.8 good 3.15-rc1 good 3.15-rc2 good 3.15-rc3 good 3.15-rc4 good 3.15-rc5 good 3.15-rc6 good 3.15-rc7 good 3.15-rc8 good 3.15 good 3.15.1 good 3.16-rc1 good -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1330530 Title: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller Status in “linux” package in Ubuntu: Incomplete Bug description: With a Dell Vostro 430, the HighPoint RocketU 1144C USB 3.0 controller, Areca ARC-5040 USB 3.0 RAID enclosure connected to it, and the following conditions are met: 1. System booted kernel 3.2.0-64, 2. HighPoint RocketU 1144C controller was installed, 3. Areca ARC-5040 was connected to that controller. An error loop during boot contains the following messages: [ 34.084469] usb 8-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 34.101825] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e000 [ 34.101918] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e040 This continues for about 18 minutes, after which the filesystem on the Areca drive is mounted, and boot process continues successfully, as if nothing had happened. Afterwards the affected drive works seemingly fine, although I experienced some system instability, causing a total system freeze. At this point I am not sure if this instability is related to the problem at hand. I've attached a file generated by apport-cli -f -p linux --save filename.apport . The problem did not appear if I booted an older kernel (e.g. 3.2.0-63), or if Areca enclosure was not attached, or if it was attached using another interface (USB2 or eSATA). The problem was also absent if I replaced the Areca enclosure with another USB3 device (a flash drive). The test machine's motherboard did not have a built-in USB3 controller, but I performed an additional test on yet another computer, equipped with a NEC USB3 controller. That test was done with kernel 3.2.0-64 and the Areca enclosure, and did not replicate the problem. Thus I assume that it is the combination of the RocketU controller and a specific USB3 device that triggers kernel regression. Similar effects happen if Areca enclosure is hot-plugged to the working system. In such a case OS boots fine (as the enclosure is absent during boot). After plugging the Areca, the drive is unavailable for 18 minutes, during which time numerous errors as above are logged. After 18 minutes elapse, drive is mounted and behaves normally. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1330530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1328984] Re: [Dell PowerEdge R510] Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card
I have tested kernels 3.16.0-031600rc1-generic and 3.2.60-030260-generic. On the former, the problem does not appear, on the latter, the bug is replicated with similar symptoms as on 3.2.0-64. I used a flash drive with a vanilla Ubuntu 12.04 desktop install for all tests. To summarize kernels tested so far: Good kernels: 3.2.0-63, 3.16.0-031600rc1 Bad kernels: 3.2.0-64, 3.2.60-030260 I also tested this issue on three additional machines, and the results were the same. So I have now five different hardware configurations (including one from bug 1330530) that are affected by this problem and show very similar symptoms. In fact, I was not able to find a computer that would not replicate this regression. If we also take into account Bard Hemmer's hardware, we can reasonably conclude that the issue is not related to motherboard/chipset/CPU/BIOS. It is however related to HighPoint RocketU 1144C add-in adapter that I used in all my tests. I would like to note that symptoms are similar on various hardware, but not identical. The errors are generally similar (xhci, udev, modprobe), but it appears that timing differences cause the issue to occur at different parts of the boot process, depending on the hardware. So far I have seen: 1. Dropping to initramfs shell in the middle of the boot (Gave up waiting for root device. ... ALERT! [boot drive] does not exist! Dropping to shell!) 2. An error loop preventing system to boot (as described in this report). In this case I am not sure whether this is an infinite loop, or if the system would boot after a long delay. 3. Boot is delayed by 18 minutes, during which time numerous errors are thrown. After 18 minutes, OS boots fine. 4. System boots to text console, rather than the graphical login screen. It is possible to log on to the console. Within seconds, xhci and/or udev errors start appearing in the syslog. After two minutes, screen goes blank, and the console seems unresponsive for another 16 minutes. Following that, the graphical login screen appears, and from this point system behaves fine. 5. As in 4, but after two minutes in the text console, incomplete graphical login screen appears. Password box is missing and the background is not fully loaded. After another 16 minutes, login screen loads missing parts, and system behaves OK. In this case it is possible to switch between text and graphical consoles during these 16 minutes, but the graphical console becomes a purple empty screen after the switch. It is also worth noting that symptoms are highly dependent on the external device(s) attached to RocketU's ports. Here is a summary: 1. No device connected to RocletU adapter - no problems during boot 2. USB3 flash drives (tested two models) - no problems during boot 3. Areca ARC-5040 enclosure - bug is triggered 4. WD MyPassport 2TB US 3.0 drive - bug is triggered 5. Transcend USB 3.0 SD card reader (TS-RDF5K) - bug is triggered with different symptoms: only a small delay (~15 seconds) and small number of xhci errors occur during boot, but the device does not work when OS is fully booted. All the above devices work fine with good kernels. Note that I tested three RocketU controllers and five Areca enclosures, to rule out the possibility of a hardware problem on these devices. With a variety of hardware reliably triggering the bug on bad kernels, while working fine with good kernels, I think it is fully substantiated to consider this regression as not hardware-dependent (apart from the RocketU controller). I am changing tags as Christopher requested in comment #13, but I would like to ask that this bug is marked as duplicate of bug 1330530. That would allow me to debug the issue on my test machines, which would be substantially easier than doing it on production servers. I would prefer not to touch these servers until the fix is released and verified on test computers. ** Tags added: kernel-fixed-upstream kernel-fixed-upstream-3.16 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1328984 Title: [Dell PowerEdge R510] Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card Status in “linux” package in Ubuntu: Incomplete Bug description: A routine system update of Ubuntu 12.04 LTS to kernel 3.2.0-64 resulted in unbootable system on two machines. Further testing revealed that kernel fails while initializing HighPoint RocketU 1144C USB 3.0 controller. This is a PCIe x4 add-in card that contains four USB 3.0 ports, each equipped with its own controller. The card did and does work without any problems with kernel 3.2.0-63 and earlier. Prior to installing kernel 3.2.0-64 there were neither hardware nor software problems with either of the machines. Steps to reproduce: apt-get dist-upgrade sync reboot Result: system fails to boot. The workaround is to revert to kernel 3.2.0-63 or to remove the RocketU card.
[Kernel-packages] [Bug 1328984] Re: [Dell PowerEdge R510] Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card
** Tags removed: kernel-fixed-upstream-3.16 ** Tags added: kernel-fixed-upstream-3.16-rc1 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1328984 Title: [Dell PowerEdge R510] Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card Status in “linux” package in Ubuntu: Incomplete Bug description: A routine system update of Ubuntu 12.04 LTS to kernel 3.2.0-64 resulted in unbootable system on two machines. Further testing revealed that kernel fails while initializing HighPoint RocketU 1144C USB 3.0 controller. This is a PCIe x4 add-in card that contains four USB 3.0 ports, each equipped with its own controller. The card did and does work without any problems with kernel 3.2.0-63 and earlier. Prior to installing kernel 3.2.0-64 there were neither hardware nor software problems with either of the machines. Steps to reproduce: apt-get dist-upgrade sync reboot Result: system fails to boot. The workaround is to revert to kernel 3.2.0-63 or to remove the RocketU card. Hardware description (same on both machines): Dell PowerEdge R510 PERC6/i RAID controller 64GB RAM DDR3 ECC registered Dual CPU: Intel Xeon X5660 2.80GHz HighPoint RocketU 1144C 4-Port USB 3.0 PCIe 2.0 x4 HBA Operating system (identical on both machines): Ubuntu 12.04.4 LTS Linux 3.2.0-64-generic x86_64 Drives: sda - logical drive on PERC6/i, OS sdb - logical drive on PERC6/i, data sdc - Areca 5040 external RAID connected by USB3 to RocketU card sdd - Areca 5040 external RAID connected by USB3 to RocketU card sde - Areca 5040 external RAID connected by USB3 to RocketU card Symptoms: System boots normally until initialization of Areca drives connected to the RocketU card. The following messages are displayed on screen when booting without quiet and with debug options. These are last messages of a typical part of the boot sequence. Following it is a ~2 minute lag when no messages are displayed. [Please note that no trace of the boot progress gets recorded in system logs, and messages on screen scroll very fast. I had to record the boot progress with a high framerate camera, and even so some messages scrolled too fast and were not recorded. The following is a manual transcript of fragments of these videos; please forgive inevitable typos.] [5.621523] scsi 5:0:0:0: Direct-Access Areca Areca5 PQ: 0 ANSI: 5 [5.622896] sd 5:0:0:0: Attached scsi generic sg4 type 0 [5.623230] sd 5:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16). [5.623668] sd 5:0:0:0: [sdc] 41015622144 512-byte logical blocks: (20.9 TB/19.0 TiB) [5.741152] scsi 6:0:0:0: Direct-Access Areca Areca3 PQ: 0 ANSI: 5 [5.744003] sd 6:0:0:0: Attached scsi generic sg5 type 0 [5.744545] sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). [5.744980] sd 6:0:0:0: [sdd] 41015622144 512-byte logical blocks: (20.9 TB/19.0 TiB) [6.004526] scsi76:0:0:0: Direct-Access Areca Areca7 PQ: 0 ANSI: 5 [6.006121] sd 7:0:0:0: Attached scsi generic sg6 type 0 [6.006488] sd 7:0:0:0: [sde] Very big device. Trying to use READ CAPACITY(16). [6.006834] sd 7:0:0:0: [sde] 35156217552 512-byte logical blocks: (17.9 TB/16.3 TiB) [7.133091] Adding 46874620k swap on /dev/sda3. Priority: -1 extents:1 across 46874620k After a two minute delay, the following messages appear in an infinite loop. Please note that these messages appear in a somewhat random sequence, and not all messages appear on every boot. The only thing that works at this point is Ctrl-Alt-Delete. udevd[632]: timeout: killing '/sbin/modprobe -bv acpi:ACPI000D:PMP0C01:' [774] udevd[703]: timeout: killing '/sbin/modprobe -bv acpi:PMP0C014:' [776] udevd[529]: timeout: killing '/sbin/modprobe -bv input:b0003v0557p2261e0110-e0,1,2,3,4,k110,111,112,r8,a0,1,m4,lsfw' [1642] udevd[630]: timeout: killing '/sbin/modprobe -bv serio:ty06pr00id00ex00' [655] udevd[508]: timeout: killing '/sbin/modprobe -bv pci:v80864342Esvsdbc00sc00i00' [512] udevd[494]: timeout: killing '/sbin/modprobe -bv input:b0019vp0001e-r0,1,k74,ramlsfw' [771] udevd[699]: timeout: killing '/sbin/modprobe -bv dmi:bvnDellInc.:bvr1.12.0:bd07/26/2013:svnDellInc.:pnPowerEdgeR510:pvr:rvnDellInc.:rm00HDP0:rvr002:cvnDellInc.:ct23:cvr:' [708] udevd[529]: timeout: killing '/sbin/modprobe -bv input:b0003v0557p2261e0110-e0,1,2,3,4,k71,72,73,74,77,80,82,83,85,86,87,88,89,8A,8B,8C,8E,8F,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B1,B2,B5,CE,CF,D0,D1,D2,D4,D8,D9,DB,E4,EA,EB,F1,100,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,182,185,188,189,18C,18D,18E,18F,190,191,192,193,195,198,199,19A,1A9,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1B0,1B1,1B7,1BA,r6,a20,m4,lsfw' [1678] After pressing Ctrl-Alt-Delete, the above messages continue to
[Kernel-packages] [Bug 1328984] Re: [Dell PowerEdge R510] Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card
** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1328984 Title: [Dell PowerEdge R510] Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card Status in “linux” package in Ubuntu: Confirmed Bug description: A routine system update of Ubuntu 12.04 LTS to kernel 3.2.0-64 resulted in unbootable system on two machines. Further testing revealed that kernel fails while initializing HighPoint RocketU 1144C USB 3.0 controller. This is a PCIe x4 add-in card that contains four USB 3.0 ports, each equipped with its own controller. The card did and does work without any problems with kernel 3.2.0-63 and earlier. Prior to installing kernel 3.2.0-64 there were neither hardware nor software problems with either of the machines. Steps to reproduce: apt-get dist-upgrade sync reboot Result: system fails to boot. The workaround is to revert to kernel 3.2.0-63 or to remove the RocketU card. Hardware description (same on both machines): Dell PowerEdge R510 PERC6/i RAID controller 64GB RAM DDR3 ECC registered Dual CPU: Intel Xeon X5660 2.80GHz HighPoint RocketU 1144C 4-Port USB 3.0 PCIe 2.0 x4 HBA Operating system (identical on both machines): Ubuntu 12.04.4 LTS Linux 3.2.0-64-generic x86_64 Drives: sda - logical drive on PERC6/i, OS sdb - logical drive on PERC6/i, data sdc - Areca 5040 external RAID connected by USB3 to RocketU card sdd - Areca 5040 external RAID connected by USB3 to RocketU card sde - Areca 5040 external RAID connected by USB3 to RocketU card Symptoms: System boots normally until initialization of Areca drives connected to the RocketU card. The following messages are displayed on screen when booting without quiet and with debug options. These are last messages of a typical part of the boot sequence. Following it is a ~2 minute lag when no messages are displayed. [Please note that no trace of the boot progress gets recorded in system logs, and messages on screen scroll very fast. I had to record the boot progress with a high framerate camera, and even so some messages scrolled too fast and were not recorded. The following is a manual transcript of fragments of these videos; please forgive inevitable typos.] [5.621523] scsi 5:0:0:0: Direct-Access Areca Areca5 PQ: 0 ANSI: 5 [5.622896] sd 5:0:0:0: Attached scsi generic sg4 type 0 [5.623230] sd 5:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16). [5.623668] sd 5:0:0:0: [sdc] 41015622144 512-byte logical blocks: (20.9 TB/19.0 TiB) [5.741152] scsi 6:0:0:0: Direct-Access Areca Areca3 PQ: 0 ANSI: 5 [5.744003] sd 6:0:0:0: Attached scsi generic sg5 type 0 [5.744545] sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). [5.744980] sd 6:0:0:0: [sdd] 41015622144 512-byte logical blocks: (20.9 TB/19.0 TiB) [6.004526] scsi76:0:0:0: Direct-Access Areca Areca7 PQ: 0 ANSI: 5 [6.006121] sd 7:0:0:0: Attached scsi generic sg6 type 0 [6.006488] sd 7:0:0:0: [sde] Very big device. Trying to use READ CAPACITY(16). [6.006834] sd 7:0:0:0: [sde] 35156217552 512-byte logical blocks: (17.9 TB/16.3 TiB) [7.133091] Adding 46874620k swap on /dev/sda3. Priority: -1 extents:1 across 46874620k After a two minute delay, the following messages appear in an infinite loop. Please note that these messages appear in a somewhat random sequence, and not all messages appear on every boot. The only thing that works at this point is Ctrl-Alt-Delete. udevd[632]: timeout: killing '/sbin/modprobe -bv acpi:ACPI000D:PMP0C01:' [774] udevd[703]: timeout: killing '/sbin/modprobe -bv acpi:PMP0C014:' [776] udevd[529]: timeout: killing '/sbin/modprobe -bv input:b0003v0557p2261e0110-e0,1,2,3,4,k110,111,112,r8,a0,1,m4,lsfw' [1642] udevd[630]: timeout: killing '/sbin/modprobe -bv serio:ty06pr00id00ex00' [655] udevd[508]: timeout: killing '/sbin/modprobe -bv pci:v80864342Esvsdbc00sc00i00' [512] udevd[494]: timeout: killing '/sbin/modprobe -bv input:b0019vp0001e-r0,1,k74,ramlsfw' [771] udevd[699]: timeout: killing '/sbin/modprobe -bv dmi:bvnDellInc.:bvr1.12.0:bd07/26/2013:svnDellInc.:pnPowerEdgeR510:pvr:rvnDellInc.:rm00HDP0:rvr002:cvnDellInc.:ct23:cvr:' [708] udevd[529]: timeout: killing '/sbin/modprobe -bv input:b0003v0557p2261e0110-e0,1,2,3,4,k71,72,73,74,77,80,82,83,85,86,87,88,89,8A,8B,8C,8E,8F,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B1,B2,B5,CE,CF,D0,D1,D2,D4,D8,D9,DB,E4,EA,EB,F1,100,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,182,185,188,189,18C,18D,18E,18F,190,191,192,193,195,198,199,19A,1A9,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1B0,1B1,1B7,1BA,r6,a20,m4,lsfw' [1678] After pressing Ctrl-Alt-Delete, the above messages continue to appear for a few
[Kernel-packages] [Bug 1330530] Re: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller
I have tested the mainline kernel 3.2.60, and was able to reproduce the problem, with exactly the same symptoms as with kernel 3.2.0-64 (3.2.59). Kernel URL: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.2.60-precise/ I also tested Western Digital My Passport 2TB USB 3.0 drive (Part# WDBY8L0020BBL). This drive is causing the same problems as Areca ARC-5040 (with kernels 3.2.0-64 and 3.2.60). No problems with kernel 3.16.0-031600rc1. Thus I have two USB3 devices that trigger the bug. As of now, the only constant element required for the bug to appear is HighPoint RocketU 1144C USB3 controller. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1330530 Title: [Dell Vostro 430] Regression: Kernel 3.2.0-64 problems with USB3 controller Status in “linux” package in Ubuntu: Incomplete Bug description: With a Dell Vostro 430, the HighPoint RocketU 1144C USB 3.0 controller, Areca ARC-5040 USB 3.0 RAID enclosure connected to it, and the following conditions are met: 1. System booted kernel 3.2.0-64, 2. HighPoint RocketU 1144C controller was installed, 3. Areca ARC-5040 was connected to that controller. An error loop during boot contains the following messages: [ 34.084469] usb 8-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 34.101825] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e000 [ 34.101918] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e040 This continues for about 18 minutes, after which the filesystem on the Areca drive is mounted, and boot process continues successfully, as if nothing had happened. Afterwards the affected drive works seemingly fine, although I experienced some system instability, causing a total system freeze. At this point I am not sure if this instability is related to the problem at hand. I've attached a file generated by apport-cli -f -p linux --save filename.apport . The problem did not appear if I booted an older kernel (e.g. 3.2.0-63), or if Areca enclosure was not attached, or if it was attached using another interface (USB2 or eSATA). The problem was also absent if I replaced the Areca enclosure with another USB3 device (a flash drive). The test machine's motherboard did not have a built-in USB3 controller, but I performed an additional test on yet another computer, equipped with a NEC USB3 controller. That test was done with kernel 3.2.0-64 and the Areca enclosure, and did not replicate the problem. Thus I assume that it is the combination of the RocketU controller and a specific USB3 device that triggers kernel regression. Similar effects happen if Areca enclosure is hot-plugged to the working system. In such a case OS boots fine (as the enclosure is absent during boot). After plugging the Areca, the drive is unavailable for 18 minutes, during which time numerous errors as above are logged. After 18 minutes elapse, drive is mounted and behaves normally. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1330530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1330530] [NEW] Regression: Kernel 3.2.0-64 problems with USB3 controller
Public bug reported: This bug report is a follow-up to bug 1328984, describing a successful attempt to replicate that bug on another hardware. As advised, I am opening a new bug to avoid mixing information related to two hardware configurations. Conditions triggering this bug: As the original bug (1328984) was encountered on machines that are production servers, I attempted to replicate in on another machine that could be entirely devoted to testing this issue. I equipped this computer with the same USB3 hardware as the servers, that is the HighPoint RocketU 1144C USB 3.0 controller and Areca ARC-5040 USB 3.0 RAID enclosure connected to it. I was able to replicate the problem with ease, provided that all three following conditions were met: 1. System booted kernel 3.2.0-64, 2. HighPoint RocketU 1144C controller was installed, 3. Areca ARC-5040 was connected to that controller. The problem did not appear if I booted an older kernel (e.g. 3.2.0-63), or if Areca enclosure was not attached, or if it was attached using another interface (USB2 or eSATA). The problem was also absent if I replaced the Areca enclosure with another USB3 device (a flash drive). The test machine's motherboard did not have a built-in USB3 controller, but I performed an additional test on yet another computer, equipped with a NEC USB3 controller. That test was done with kernel 3.2.0-64 and the Areca enclosure, and did not replicate the problem. Thus I assume that it is the combination of the RocketU controller and a specific USB3 device that triggers kernel regression. In the original bug report (1328984) Bard Hemmer reported that he encountered a similar trouble with Western Digital My Passport 2TB USB 3.0 external drive. I happen to own this exact model, and I intend to test it as soon as possible. Symptoms: The symptoms on the test machine are somewhat different than those occurring on the production servers. The error loop during boot contains the following messages: [ 34.084469] usb 8-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 34.101825] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e000 [ 34.101918] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e040 This continues for about 18 minutes, after which the filesystem on the Areca drive is mounted, and boot process continues successfully, as if nothing had happened. Afterwards the affected drive works seemingly fine, although I experienced some system instability, causing a total system freeze. At this point I am not sure if this instability is related to the problem at hand. Similar effects happen if Areca enclosure is hot-plugged to the working system. In such a case OS boots fine (as the enclosure is absent during boot). After plugging the Areca, the drive is unavailable for 18 minutes, during which time numerous errors as above are logged. After 18 minutes elapse, drive is mounted and behaves normally. Hardware: Dell Vostro 430 CPU: Intel Core i7-860 RAM: 16GB DDR3 unbuffered non-ECC Add-on card: HighPoint RocketU 1144C 4-Port USB 3.0 PCIe 2.0 x4 HBA Software: Ubuntu 3.2.0-64.97-generic 3.2.59 x86_64 Note about apport collection: Due to problems described in bug 1328984, relevant to this setup as well, I am unable to run apport tools to submit system information. For this reason, I am attaching a file generated by apport-cli -f -p linux --save filename.apport ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1330530 Title: Regression: Kernel 3.2.0-64 problems with USB3 controller Status in “linux” package in Ubuntu: New Bug description: This bug report is a follow-up to bug 1328984, describing a successful attempt to replicate that bug on another hardware. As advised, I am opening a new bug to avoid mixing information related to two hardware configurations. Conditions triggering this bug: As the original bug (1328984) was encountered on machines that are production servers, I attempted to replicate in on another machine that could be entirely devoted to testing this issue. I equipped this computer with the same USB3 hardware as the servers, that is the HighPoint RocketU 1144C USB 3.0 controller and Areca ARC-5040 USB 3.0 RAID enclosure connected to it. I was able to replicate the problem with ease, provided that all three following conditions were met: 1. System booted kernel 3.2.0-64, 2. HighPoint RocketU 1144C controller was installed, 3. Areca ARC-5040 was connected to that controller. The problem did not appear if I booted an older kernel (e.g. 3.2.0-63), or if Areca enclosure was not attached, or if it was attached using another interface (USB2 or eSATA). The problem was also absent if I replaced the Areca enclosure with another USB3
[Kernel-packages] [Bug 1330530] Re: Regression: Kernel 3.2.0-64 problems with USB3 controller
** Attachment added: Result of apport-cli https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1330530/+attachment/4132664/+files/bug1330530.apport -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1330530 Title: Regression: Kernel 3.2.0-64 problems with USB3 controller Status in “linux” package in Ubuntu: Incomplete Bug description: This bug report is a follow-up to bug 1328984, describing a successful attempt to replicate that bug on another hardware. As advised, I am opening a new bug to avoid mixing information related to two hardware configurations. Conditions triggering this bug: As the original bug (1328984) was encountered on machines that are production servers, I attempted to replicate in on another machine that could be entirely devoted to testing this issue. I equipped this computer with the same USB3 hardware as the servers, that is the HighPoint RocketU 1144C USB 3.0 controller and Areca ARC-5040 USB 3.0 RAID enclosure connected to it. I was able to replicate the problem with ease, provided that all three following conditions were met: 1. System booted kernel 3.2.0-64, 2. HighPoint RocketU 1144C controller was installed, 3. Areca ARC-5040 was connected to that controller. The problem did not appear if I booted an older kernel (e.g. 3.2.0-63), or if Areca enclosure was not attached, or if it was attached using another interface (USB2 or eSATA). The problem was also absent if I replaced the Areca enclosure with another USB3 device (a flash drive). The test machine's motherboard did not have a built-in USB3 controller, but I performed an additional test on yet another computer, equipped with a NEC USB3 controller. That test was done with kernel 3.2.0-64 and the Areca enclosure, and did not replicate the problem. Thus I assume that it is the combination of the RocketU controller and a specific USB3 device that triggers kernel regression. In the original bug report (1328984) Bard Hemmer reported that he encountered a similar trouble with Western Digital My Passport 2TB USB 3.0 external drive. I happen to own this exact model, and I intend to test it as soon as possible. Symptoms: The symptoms on the test machine are somewhat different than those occurring on the production servers. The error loop during boot contains the following messages: [ 34.084469] usb 8-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 34.101825] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e000 [ 34.101918] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e040 This continues for about 18 minutes, after which the filesystem on the Areca drive is mounted, and boot process continues successfully, as if nothing had happened. Afterwards the affected drive works seemingly fine, although I experienced some system instability, causing a total system freeze. At this point I am not sure if this instability is related to the problem at hand. Similar effects happen if Areca enclosure is hot-plugged to the working system. In such a case OS boots fine (as the enclosure is absent during boot). After plugging the Areca, the drive is unavailable for 18 minutes, during which time numerous errors as above are logged. After 18 minutes elapse, drive is mounted and behaves normally. Hardware: Dell Vostro 430 CPU: Intel Core i7-860 RAM: 16GB DDR3 unbuffered non-ECC Add-on card: HighPoint RocketU 1144C 4-Port USB 3.0 PCIe 2.0 x4 HBA Software: Ubuntu 3.2.0-64.97-generic 3.2.59 x86_64 Note about apport collection: Due to problems described in bug 1328984, relevant to this setup as well, I am unable to run apport tools to submit system information. For this reason, I am attaching a file generated by apport-cli -f -p linux --save filename.apport To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1330530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1330530] Re: Regression: Kernel 3.2.0-64 problems with USB3 controller
A few notes regarding the contents of the apport file submitted above: 1. Times logged in syslog are incorrect and do not reflect the 18-minute delay. It appears that rsyslog is started after the delay and logs its startup time, not the real time of events. 2. Nouveau segfaults are not related to this bug report, and were occurring in older kernels as well. As this bug has been replicated on various hardware, affects more than one user, and requested system information has been provided, I am changing status to 'confirmed'. When the nature of this problem is better understood, this bug may possibly be marked as a duplicate of bug 1328984. ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1330530 Title: Regression: Kernel 3.2.0-64 problems with USB3 controller Status in “linux” package in Ubuntu: Confirmed Bug description: This bug report is a follow-up to bug 1328984, describing a successful attempt to replicate that bug on another hardware. As advised, I am opening a new bug to avoid mixing information related to two hardware configurations. Conditions triggering this bug: As the original bug (1328984) was encountered on machines that are production servers, I attempted to replicate in on another machine that could be entirely devoted to testing this issue. I equipped this computer with the same USB3 hardware as the servers, that is the HighPoint RocketU 1144C USB 3.0 controller and Areca ARC-5040 USB 3.0 RAID enclosure connected to it. I was able to replicate the problem with ease, provided that all three following conditions were met: 1. System booted kernel 3.2.0-64, 2. HighPoint RocketU 1144C controller was installed, 3. Areca ARC-5040 was connected to that controller. The problem did not appear if I booted an older kernel (e.g. 3.2.0-63), or if Areca enclosure was not attached, or if it was attached using another interface (USB2 or eSATA). The problem was also absent if I replaced the Areca enclosure with another USB3 device (a flash drive). The test machine's motherboard did not have a built-in USB3 controller, but I performed an additional test on yet another computer, equipped with a NEC USB3 controller. That test was done with kernel 3.2.0-64 and the Areca enclosure, and did not replicate the problem. Thus I assume that it is the combination of the RocketU controller and a specific USB3 device that triggers kernel regression. In the original bug report (1328984) Bard Hemmer reported that he encountered a similar trouble with Western Digital My Passport 2TB USB 3.0 external drive. I happen to own this exact model, and I intend to test it as soon as possible. Symptoms: The symptoms on the test machine are somewhat different than those occurring on the production servers. The error loop during boot contains the following messages: [ 34.084469] usb 8-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 34.101825] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e000 [ 34.101918] xhci_hcd :05:00.0: xHCI xhci_drop_endpoint called with disabled ep 88042102e040 This continues for about 18 minutes, after which the filesystem on the Areca drive is mounted, and boot process continues successfully, as if nothing had happened. Afterwards the affected drive works seemingly fine, although I experienced some system instability, causing a total system freeze. At this point I am not sure if this instability is related to the problem at hand. Similar effects happen if Areca enclosure is hot-plugged to the working system. In such a case OS boots fine (as the enclosure is absent during boot). After plugging the Areca, the drive is unavailable for 18 minutes, during which time numerous errors as above are logged. After 18 minutes elapse, drive is mounted and behaves normally. Hardware: Dell Vostro 430 CPU: Intel Core i7-860 RAM: 16GB DDR3 unbuffered non-ECC Add-on card: HighPoint RocketU 1144C 4-Port USB 3.0 PCIe 2.0 x4 HBA Software: Ubuntu 3.2.0-64.97-generic 3.2.59 x86_64 Note about apport collection: Due to problems described in bug 1328984, relevant to this setup as well, I am unable to run apport tools to submit system information. For this reason, I am attaching a file generated by apport-cli -f -p linux --save filename.apport To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1330530/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1328984] Re: [Dell PowerEdge R510] Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card
I have created a new bug report describing this problem replicated on another hardware: bug 1330530 As that is a test machine entirely devoted to this issue, I will test the upstream kernel on it and post the results in bug 1330530. Regarding testing of the upstream kernel on PowerEdge machines, these are production servers, and I need to schedule a maintenance window in order to take one of them offline. I am required to give an advance notification to users, so this is not something that can be done on a very short notice, or very often (once per week is max I can do). For this reason, may I ask if there are any other conceivable tests that I could run? It would speed things up considerably if I could use the maintenance window to do as many tests as possible, rather than do one at a time. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1328984 Title: [Dell PowerEdge R510] Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card Status in “linux” package in Ubuntu: Incomplete Bug description: A routine system update of Ubuntu 12.04 LTS to kernel 3.2.0-64 resulted in unbootable system on two machines. Further testing revealed that kernel fails while initializing HighPoint RocketU 1144C USB 3.0 controller. This is a PCIe x4 add-in card that contains four USB 3.0 ports, each equipped with its own controller. The card did and does work without any problems with kernel 3.2.0-63 and earlier. Prior to installing kernel 3.2.0-64 there were neither hardware nor software problems with either of the machines. Steps to reproduce: apt-get dist-upgrade sync reboot Result: system fails to boot. The workaround is to revert to kernel 3.2.0-63 or to remove the RocketU card. Hardware description (same on both machines): Dell PowerEdge R510 PERC6/i RAID controller 64GB RAM DDR3 ECC registered Dual CPU: Intel Xeon X5660 2.80GHz HighPoint RocketU 1144C 4-Port USB 3.0 PCIe 2.0 x4 HBA Operating system (identical on both machines): Ubuntu 12.04.4 LTS Linux 3.2.0-64-generic x86_64 Drives: sda - logical drive on PERC6/i, OS sdb - logical drive on PERC6/i, data sdc - Areca 5040 external RAID connected by USB3 to RocketU card sdd - Areca 5040 external RAID connected by USB3 to RocketU card sde - Areca 5040 external RAID connected by USB3 to RocketU card Symptoms: System boots normally until initialization of Areca drives connected to the RocketU card. The following messages are displayed on screen when booting without quiet and with debug options. These are last messages of a typical part of the boot sequence. Following it is a ~2 minute lag when no messages are displayed. [Please note that no trace of the boot progress gets recorded in system logs, and messages on screen scroll very fast. I had to record the boot progress with a high framerate camera, and even so some messages scrolled too fast and were not recorded. The following is a manual transcript of fragments of these videos; please forgive inevitable typos.] [5.621523] scsi 5:0:0:0: Direct-Access Areca Areca5 PQ: 0 ANSI: 5 [5.622896] sd 5:0:0:0: Attached scsi generic sg4 type 0 [5.623230] sd 5:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16). [5.623668] sd 5:0:0:0: [sdc] 41015622144 512-byte logical blocks: (20.9 TB/19.0 TiB) [5.741152] scsi 6:0:0:0: Direct-Access Areca Areca3 PQ: 0 ANSI: 5 [5.744003] sd 6:0:0:0: Attached scsi generic sg5 type 0 [5.744545] sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). [5.744980] sd 6:0:0:0: [sdd] 41015622144 512-byte logical blocks: (20.9 TB/19.0 TiB) [6.004526] scsi76:0:0:0: Direct-Access Areca Areca7 PQ: 0 ANSI: 5 [6.006121] sd 7:0:0:0: Attached scsi generic sg6 type 0 [6.006488] sd 7:0:0:0: [sde] Very big device. Trying to use READ CAPACITY(16). [6.006834] sd 7:0:0:0: [sde] 35156217552 512-byte logical blocks: (17.9 TB/16.3 TiB) [7.133091] Adding 46874620k swap on /dev/sda3. Priority: -1 extents:1 across 46874620k After a two minute delay, the following messages appear in an infinite loop. Please note that these messages appear in a somewhat random sequence, and not all messages appear on every boot. The only thing that works at this point is Ctrl-Alt-Delete. udevd[632]: timeout: killing '/sbin/modprobe -bv acpi:ACPI000D:PMP0C01:' [774] udevd[703]: timeout: killing '/sbin/modprobe -bv acpi:PMP0C014:' [776] udevd[529]: timeout: killing '/sbin/modprobe -bv input:b0003v0557p2261e0110-e0,1,2,3,4,k110,111,112,r8,a0,1,m4,lsfw' [1642] udevd[630]: timeout: killing '/sbin/modprobe -bv serio:ty06pr00id00ex00' [655] udevd[508]: timeout: killing '/sbin/modprobe -bv pci:v80864342Esvsdbc00sc00i00' [512] udevd[494]: timeout: killing '/sbin/modprobe -bv input:b0019vp0001e-r0,1,k74,ramlsfw' [771] udevd[699]:
[Kernel-packages] [Bug 1328984] Re: Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card
I'm attaching the file generated by command: apport-cli -f -p linux --save bug1328984.apport This was done with the machine running 12.04 Server with kernel 3.2.0-63. May I ask for the reply to my question about the results of testing the problem on a different hardware? (The regression has been reproduced, but symptoms are somewhat different, and I worry about confusion which may result from mixing discussion about two hardware configurations. On the other hand, I am reluctant to start a new bug report, as this appears to be a single bug.) ** Attachment added: Result of apport-cli https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1328984/+attachment/4130995/+files/bug1328984.apport -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1328984 Title: Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card Status in “linux” package in Ubuntu: Incomplete Bug description: A routine system update of Ubuntu 12.04 LTS to kernel 3.2.0-64 resulted in unbootable system on two machines. Further testing revealed that kernel fails while initializing HighPoint RocketU 1144C USB 3.0 controller. This is a PCIe x4 add-in card that contains four USB 3.0 ports, each equipped with its own controller. The card did and does work without any problems with kernel 3.2.0-63 and earlier. Prior to installing kernel 3.2.0-64 there were neither hardware nor software problems with either of the machines. Steps to reproduce: apt-get dist-upgrade sync reboot Result: system fails to boot. The workaround is to revert to kernel 3.2.0-63 or to remove the RocketU card. Hardware description (same on both machines): Dell PowerEdge R510 PERC6/i RAID controller 64GB RAM DDR3 ECC registered Dual CPU: Intel Xeon X5660 2.80GHz HighPoint RocketU 1144C 4-Port USB 3.0 PCIe 2.0 x4 HBA Operating system (identical on both machines): Ubuntu 12.04.4 LTS Linux 3.2.0-64-generic x86_64 Drives: sda - logical drive on PERC6/i, OS sdb - logical drive on PERC6/i, data sdc - Areca 5040 external RAID connected by USB3 to RocketU card sdd - Areca 5040 external RAID connected by USB3 to RocketU card sde - Areca 5040 external RAID connected by USB3 to RocketU card Symptoms: System boots normally until initialization of Areca drives connected to the RocketU card. The following messages are displayed on screen when booting without quiet and with debug options. These are last messages of a typical part of the boot sequence. Following it is a ~2 minute lag when no messages are displayed. [Please note that no trace of the boot progress gets recorded in system logs, and messages on screen scroll very fast. I had to record the boot progress with a high framerate camera, and even so some messages scrolled too fast and were not recorded. The following is a manual transcript of fragments of these videos; please forgive inevitable typos.] [5.621523] scsi 5:0:0:0: Direct-Access Areca Areca5 PQ: 0 ANSI: 5 [5.622896] sd 5:0:0:0: Attached scsi generic sg4 type 0 [5.623230] sd 5:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16). [5.623668] sd 5:0:0:0: [sdc] 41015622144 512-byte logical blocks: (20.9 TB/19.0 TiB) [5.741152] scsi 6:0:0:0: Direct-Access Areca Areca3 PQ: 0 ANSI: 5 [5.744003] sd 6:0:0:0: Attached scsi generic sg5 type 0 [5.744545] sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). [5.744980] sd 6:0:0:0: [sdd] 41015622144 512-byte logical blocks: (20.9 TB/19.0 TiB) [6.004526] scsi76:0:0:0: Direct-Access Areca Areca7 PQ: 0 ANSI: 5 [6.006121] sd 7:0:0:0: Attached scsi generic sg6 type 0 [6.006488] sd 7:0:0:0: [sde] Very big device. Trying to use READ CAPACITY(16). [6.006834] sd 7:0:0:0: [sde] 35156217552 512-byte logical blocks: (17.9 TB/16.3 TiB) [7.133091] Adding 46874620k swap on /dev/sda3. Priority: -1 extents:1 across 46874620k After a two minute delay, the following messages appear in an infinite loop. Please note that these messages appear in a somewhat random sequence, and not all messages appear on every boot. The only thing that works at this point is Ctrl-Alt-Delete. udevd[632]: timeout: killing '/sbin/modprobe -bv acpi:ACPI000D:PMP0C01:' [774] udevd[703]: timeout: killing '/sbin/modprobe -bv acpi:PMP0C014:' [776] udevd[529]: timeout: killing '/sbin/modprobe -bv input:b0003v0557p2261e0110-e0,1,2,3,4,k110,111,112,r8,a0,1,m4,lsfw' [1642] udevd[630]: timeout: killing '/sbin/modprobe -bv serio:ty06pr00id00ex00' [655] udevd[508]: timeout: killing '/sbin/modprobe -bv pci:v80864342Esvsdbc00sc00i00' [512] udevd[494]: timeout: killing '/sbin/modprobe -bv input:b0019vp0001e-r0,1,k74,ramlsfw' [771] udevd[699]: timeout: killing '/sbin/modprobe -bv
[Kernel-packages] [Bug 1328984] Re: Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card
I am unable to submit apport-collected data due to what appears to be numerous bugs in apport tools: 1. Submitting data directly from the affected machine is not possible due to apport not being able to connect through a proxy. 2. Following instructions on referenced page to submit previously created .apport file using ubuntu-bug does not work, because ubuntu-bug ignores file specified in -c or --crash-file parameter, and proceeds to gather system information from the machine on which it is running. As this is a wrong machine, I had no choice but to cancel the submission. 3. In addition, ubuntu-bug generates the following error: No packages found matching linux. ERROR: hook /usr/share/apport/general-hooks/cloud_archive.py crashed At this point debugging apport is not my priority. I would be grateful if you indicate an alternative way to proceed. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1328984 Title: Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card Status in “linux” package in Ubuntu: Incomplete Bug description: A routine system update of Ubuntu 12.04 LTS to kernel 3.2.0-64 resulted in unbootable system on two machines. Further testing revealed that kernel fails while initializing HighPoint RocketU 1144C USB 3.0 controller. This is a PCIe x4 add-in card that contains four USB 3.0 ports, each equipped with its own controller. The card did and does work without any problems with kernel 3.2.0-63 and earlier. Prior to installing kernel 3.2.0-64 there were neither hardware nor software problems with either of the machines. Steps to reproduce: apt-get dist-upgrade sync reboot Result: system fails to boot. The workaround is to revert to kernel 3.2.0-63 or to remove the RocketU card. Hardware description (same on both machines): Dell PowerEdge R510 PERC6/i RAID controller 64GB RAM DDR3 ECC registered Dual CPU: Intel Xeon X5660 2.80GHz HighPoint RocketU 1144C 4-Port USB 3.0 PCIe 2.0 x4 HBA Operating system (identical on both machines): Ubuntu 12.04.4 LTS Linux 3.2.0-64-generic x86_64 Drives: sda - logical drive on PERC6/i, OS sdb - logical drive on PERC6/i, data sdc - Areca 5040 external RAID connected by USB3 to RocketU card sdd - Areca 5040 external RAID connected by USB3 to RocketU card sde - Areca 5040 external RAID connected by USB3 to RocketU card Symptoms: System boots normally until initialization of Areca drives connected to the RocketU card. The following messages are displayed on screen when booting without quiet and with debug options. These are last messages of a typical part of the boot sequence. Following it is a ~2 minute lag when no messages are displayed. [Please note that no trace of the boot progress gets recorded in system logs, and messages on screen scroll very fast. I had to record the boot progress with a high framerate camera, and even so some messages scrolled too fast and were not recorded. The following is a manual transcript of fragments of these videos; please forgive inevitable typos.] [5.621523] scsi 5:0:0:0: Direct-Access Areca Areca5 PQ: 0 ANSI: 5 [5.622896] sd 5:0:0:0: Attached scsi generic sg4 type 0 [5.623230] sd 5:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16). [5.623668] sd 5:0:0:0: [sdc] 41015622144 512-byte logical blocks: (20.9 TB/19.0 TiB) [5.741152] scsi 6:0:0:0: Direct-Access Areca Areca3 PQ: 0 ANSI: 5 [5.744003] sd 6:0:0:0: Attached scsi generic sg5 type 0 [5.744545] sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). [5.744980] sd 6:0:0:0: [sdd] 41015622144 512-byte logical blocks: (20.9 TB/19.0 TiB) [6.004526] scsi76:0:0:0: Direct-Access Areca Areca7 PQ: 0 ANSI: 5 [6.006121] sd 7:0:0:0: Attached scsi generic sg6 type 0 [6.006488] sd 7:0:0:0: [sde] Very big device. Trying to use READ CAPACITY(16). [6.006834] sd 7:0:0:0: [sde] 35156217552 512-byte logical blocks: (17.9 TB/16.3 TiB) [7.133091] Adding 46874620k swap on /dev/sda3. Priority: -1 extents:1 across 46874620k After a two minute delay, the following messages appear in an infinite loop. Please note that these messages appear in a somewhat random sequence, and not all messages appear on every boot. The only thing that works at this point is Ctrl-Alt-Delete. udevd[632]: timeout: killing '/sbin/modprobe -bv acpi:ACPI000D:PMP0C01:' [774] udevd[703]: timeout: killing '/sbin/modprobe -bv acpi:PMP0C014:' [776] udevd[529]: timeout: killing '/sbin/modprobe -bv input:b0003v0557p2261e0110-e0,1,2,3,4,k110,111,112,r8,a0,1,m4,lsfw' [1642] udevd[630]: timeout: killing '/sbin/modprobe -bv serio:ty06pr00id00ex00' [655] udevd[508]: timeout: killing '/sbin/modprobe -bv pci:v80864342Esvsdbc00sc00i00' [512] udevd[494]: timeout: killing '/sbin/modprobe -bv
[Kernel-packages] [Bug 1328984] Re: Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card
** Project changed: software-center = linux-meta (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-meta in Ubuntu. https://bugs.launchpad.net/bugs/1328984 Title: Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card Status in “linux-meta” package in Ubuntu: New Bug description: A routine system update of Ubuntu 12.04 LTS to kernel 3.2.0-64 resulted in unbootable system on two machines. Further testing revealed that kernel fails while initializing HighPoint RocketU 1144C USB 3.0 controller. This is a PCIe x4 add-in card that contains four USB 3.0 ports, each equipped with its own controller. The card did and does work without any problems with kernel 3.2.0-63 and earlier. Prior to installing kernel 3.2.0-64 there were neither hardware nor software problems with either of the machines. Steps to reproduce: apt-get dist-upgrade sync reboot Result: system fails to boot. The workaround is to revert to kernel 3.2.0-63 or to remove the RocketU card. Hardware description (same on both machines): Dell PowerEdge R510 PERC6/i RAID controller 64GB RAM DDR3 ECC registered Dual CPU: Intel Xeon X5660 2.80GHz HighPoint RocketU 1144C 4-Port USB 3.0 PCIe 2.0 x4 HBA Operating system (identical on both machines): Ubuntu 12.04.4 LTS Linux 3.2.0-64-generic x86_64 Drives: sda - logical drive on PERC6/i, OS sdb - logical drive on PERC6/i, data sdc - Areca 5040 external RAID connected by USB3 to RocketU card sdd - Areca 5040 external RAID connected by USB3 to RocketU card sde - Areca 5040 external RAID connected by USB3 to RocketU card Symptoms: System boots normally until initialization of Areca drives connected to the RocketU card. The following messages are displayed on screen when booting without quiet and with debug options. These are last messages of a typical part of the boot sequence. Following it is a ~2 minute lag when no messages are displayed. [Please note that no trace of the boot progress gets recorded in system logs, and messages on screen scroll very fast. I had to record the boot progress with a high framerate camera, and even so some messages scrolled too fast and were not recorded. The following is a manual transcript of fragments of these videos; please forgive inevitable typos.] [5.621523] scsi 5:0:0:0: Direct-Access Areca Areca5 PQ: 0 ANSI: 5 [5.622896] sd 5:0:0:0: Attached scsi generic sg4 type 0 [5.623230] sd 5:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16). [5.623668] sd 5:0:0:0: [sdc] 41015622144 512-byte logical blocks: (20.9 TB/19.0 TiB) [5.741152] scsi 6:0:0:0: Direct-Access Areca Areca3 PQ: 0 ANSI: 5 [5.744003] sd 6:0:0:0: Attached scsi generic sg5 type 0 [5.744545] sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). [5.744980] sd 6:0:0:0: [sdd] 41015622144 512-byte logical blocks: (20.9 TB/19.0 TiB) [6.004526] scsi76:0:0:0: Direct-Access Areca Areca7 PQ: 0 ANSI: 5 [6.006121] sd 7:0:0:0: Attached scsi generic sg6 type 0 [6.006488] sd 7:0:0:0: [sde] Very big device. Trying to use READ CAPACITY(16). [6.006834] sd 7:0:0:0: [sde] 35156217552 512-byte logical blocks: (17.9 TB/16.3 TiB) [7.133091] Adding 46874620k swap on /dev/sda3. Priority: -1 extents:1 across 46874620k After a two minute delay, the following messages appear in an infinite loop. Please note that these messages appear in a somewhat random sequence, and not all messages appear on every boot. The only thing that works at this point is Ctrl-Alt-Delete. udevd[632]: timeout: killing '/sbin/modprobe -bv acpi:ACPI000D:PMP0C01:' [774] udevd[703]: timeout: killing '/sbin/modprobe -bv acpi:PMP0C014:' [776] udevd[529]: timeout: killing '/sbin/modprobe -bv input:b0003v0557p2261e0110-e0,1,2,3,4,k110,111,112,r8,a0,1,m4,lsfw' [1642] udevd[630]: timeout: killing '/sbin/modprobe -bv serio:ty06pr00id00ex00' [655] udevd[508]: timeout: killing '/sbin/modprobe -bv pci:v80864342Esvsdbc00sc00i00' [512] udevd[494]: timeout: killing '/sbin/modprobe -bv input:b0019vp0001e-r0,1,k74,ramlsfw' [771] udevd[699]: timeout: killing '/sbin/modprobe -bv dmi:bvnDellInc.:bvr1.12.0:bd07/26/2013:svnDellInc.:pnPowerEdgeR510:pvr:rvnDellInc.:rm00HDP0:rvr002:cvnDellInc.:ct23:cvr:' [708] udevd[529]: timeout: killing '/sbin/modprobe -bv input:b0003v0557p2261e0110-e0,1,2,3,4,k71,72,73,74,77,80,82,83,85,86,87,88,89,8A,8B,8C,8E,8F,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B1,B2,B5,CE,CF,D0,D1,D2,D4,D8,D9,DB,E4,EA,EB,F1,100,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,182,185,188,189,18C,18D,18E,18F,190,191,192,193,195,198,199,19A,1A9,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1B0,1B1,1B7,1BA,r6,a20,m4,lsfw' [1678] After pressing Ctrl-Alt-Delete, the above messages continue to appear for a few seconds, and after that the
[Kernel-packages] [Bug 1328984] Re: Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card
I am unable to run the apport-collect command for two reasons: 1. The bug in question renders the machine unbootable. To boot the machine and run apport-collect, it is necessary to change either the software or hardware configuration. This would create an environment in which bug is not reproducible. 2. Two affected machines are servers located behind a corporate proxy. Apport-collect does not allow transmission through a proxy. As instructed, I am changing the status to 'Confirmed'. ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1328984 Title: Regression: Kernel 3.2.0-64 fails to boot with USB3 controller card Status in “linux” package in Ubuntu: Confirmed Bug description: A routine system update of Ubuntu 12.04 LTS to kernel 3.2.0-64 resulted in unbootable system on two machines. Further testing revealed that kernel fails while initializing HighPoint RocketU 1144C USB 3.0 controller. This is a PCIe x4 add-in card that contains four USB 3.0 ports, each equipped with its own controller. The card did and does work without any problems with kernel 3.2.0-63 and earlier. Prior to installing kernel 3.2.0-64 there were neither hardware nor software problems with either of the machines. Steps to reproduce: apt-get dist-upgrade sync reboot Result: system fails to boot. The workaround is to revert to kernel 3.2.0-63 or to remove the RocketU card. Hardware description (same on both machines): Dell PowerEdge R510 PERC6/i RAID controller 64GB RAM DDR3 ECC registered Dual CPU: Intel Xeon X5660 2.80GHz HighPoint RocketU 1144C 4-Port USB 3.0 PCIe 2.0 x4 HBA Operating system (identical on both machines): Ubuntu 12.04.4 LTS Linux 3.2.0-64-generic x86_64 Drives: sda - logical drive on PERC6/i, OS sdb - logical drive on PERC6/i, data sdc - Areca 5040 external RAID connected by USB3 to RocketU card sdd - Areca 5040 external RAID connected by USB3 to RocketU card sde - Areca 5040 external RAID connected by USB3 to RocketU card Symptoms: System boots normally until initialization of Areca drives connected to the RocketU card. The following messages are displayed on screen when booting without quiet and with debug options. These are last messages of a typical part of the boot sequence. Following it is a ~2 minute lag when no messages are displayed. [Please note that no trace of the boot progress gets recorded in system logs, and messages on screen scroll very fast. I had to record the boot progress with a high framerate camera, and even so some messages scrolled too fast and were not recorded. The following is a manual transcript of fragments of these videos; please forgive inevitable typos.] [5.621523] scsi 5:0:0:0: Direct-Access Areca Areca5 PQ: 0 ANSI: 5 [5.622896] sd 5:0:0:0: Attached scsi generic sg4 type 0 [5.623230] sd 5:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16). [5.623668] sd 5:0:0:0: [sdc] 41015622144 512-byte logical blocks: (20.9 TB/19.0 TiB) [5.741152] scsi 6:0:0:0: Direct-Access Areca Areca3 PQ: 0 ANSI: 5 [5.744003] sd 6:0:0:0: Attached scsi generic sg5 type 0 [5.744545] sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). [5.744980] sd 6:0:0:0: [sdd] 41015622144 512-byte logical blocks: (20.9 TB/19.0 TiB) [6.004526] scsi76:0:0:0: Direct-Access Areca Areca7 PQ: 0 ANSI: 5 [6.006121] sd 7:0:0:0: Attached scsi generic sg6 type 0 [6.006488] sd 7:0:0:0: [sde] Very big device. Trying to use READ CAPACITY(16). [6.006834] sd 7:0:0:0: [sde] 35156217552 512-byte logical blocks: (17.9 TB/16.3 TiB) [7.133091] Adding 46874620k swap on /dev/sda3. Priority: -1 extents:1 across 46874620k After a two minute delay, the following messages appear in an infinite loop. Please note that these messages appear in a somewhat random sequence, and not all messages appear on every boot. The only thing that works at this point is Ctrl-Alt-Delete. udevd[632]: timeout: killing '/sbin/modprobe -bv acpi:ACPI000D:PMP0C01:' [774] udevd[703]: timeout: killing '/sbin/modprobe -bv acpi:PMP0C014:' [776] udevd[529]: timeout: killing '/sbin/modprobe -bv input:b0003v0557p2261e0110-e0,1,2,3,4,k110,111,112,r8,a0,1,m4,lsfw' [1642] udevd[630]: timeout: killing '/sbin/modprobe -bv serio:ty06pr00id00ex00' [655] udevd[508]: timeout: killing '/sbin/modprobe -bv pci:v80864342Esvsdbc00sc00i00' [512] udevd[494]: timeout: killing '/sbin/modprobe -bv input:b0019vp0001e-r0,1,k74,ramlsfw' [771] udevd[699]: timeout: killing '/sbin/modprobe -bv dmi:bvnDellInc.:bvr1.12.0:bd07/26/2013:svnDellInc.:pnPowerEdgeR510:pvr:rvnDellInc.:rm00HDP0:rvr002:cvnDellInc.:ct23:cvr:' [708] udevd[529]: timeout: killing '/sbin/modprobe -bv