Look like this issue has been fixed for Ubuntu 22.04: linux-image-
generic-hwe-22.04 @ 6.5.0.14.14~22.04.7
TPM is working again as expected.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-signed-hwe-6.2 in Ubuntu.
So I repeated the setup sequence ... and no segfaults. All is working
without any problems.
So ... close as a fluke?
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-meta-allwinner-5.17 in Ubuntu.
problem (or that it was just a
fluke).
On Wed, Oct 26, 2022 at 1:57 PM Heinrich Schuchardt <
1994...@bugs.launchpad.net> wrote:
> Sander, as you mentioned Armbian just for clarification: Did you
> experience the problem with a fresh install using Ubuntu's LicheeRV
> image or with some Armb
File attached: syslog from around the Oops-es
ubuntu@ubuntu:/var/log$ cat syslog | grep Oops
Oct 25 18:27:24 ubuntu kernel: [ 4377.869176] Oops [#1]
Oct 25 18:27:53 ubuntu kernel: [ 4406.955407] Oops [#2]
Oct 25 18:27:57 ubuntu kernel: [ 4411.224132] Oops [#3]
Oct 25 18:28:06 ubuntu kernel: [
apport says the below ...
$ apport-collect 1994490
Package linux-meta-allwinner-5.17 not installed and no hook available, ignoring
*** Updating problem report
No additional information collected.
Press any key to continue...
No pending crash reports. Try --help for more information.
--
You
Oct 25 18:27:53 ubuntu kernel: [ 4406.926779] Unable to handle kernel paging
request at virtual address ff983a94d92e
Oct 25 18:27:53 ubuntu kernel: [ 4406.955407] Oops [#2]
Oct 25 18:27:53 ubuntu kernel: [ 4406.978035] Modules linked in: tls(+) sr9700
dm9601 usbnet input_leds joydev
Public bug reported:
Hardware: Licheee RV Dock RISC-V Allwinner D1. Has been rockstable for
months with an image from Armbian person
Followed https://wiki.ubuntu.com/RISC-V/LicheeRV . After "sudo apt-get
install licheerv-rtl8723ds-dkms" (but without reboot), I got segfaults
for normal commands
ApportVersion: 2.20.11-0ubuntu82.1
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 1329 F pulseaudio
CRDA: N/A
CasperMD5CheckResult: pass
CurrentDesktop: ubuntu:GNOME
Date: Tue May 31 19:24:02 2022
InstallationDate: Installed
esg ... so the i8042 driver
already something was fishy, and hinted what I should do ... ?
sander@zwart2204:~$ sudo dmesg | grep i8042
[0.00] Command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-33-generic
root=UUID=1e423543-e174-4d68-9250-1707c248963c ro quiet splash i8042.nopnp
vt
Only i8042.direct ... not good. Keyboard not working for x seconds
Only i8042.dumbkbd ... yes, works! Keyboard working immediatly.
So my /etc/default/grub now contains:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i8042.dumbkbd"
And stuff from dmesg:
sander@zwart2204:~$ sudo dmesg |
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 1329 F pulseaudio
CRDA: N/A
CasperMD5CheckResult: pass
CurrentDesktop: ubuntu:GNOME
Date: Tue May 31 19:24:02 2022
InstallationDate: Installed on 2022-05-31 (0 days ago
ProcVersionSignature: Ubuntu 5.15.0-33.34-generic 5.15.30
Uname: Linux 5.15.0-33-generic x86_64
ApportVersion: 2.20.11-0ubuntu82.1
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 1329 F pulseaudio
CRDA: N/A
CasperMD5Chec
Package: linux-image-5.15.0-33-generic 5.15.0-33.34
ProcVersionSignature: Ubuntu 5.15.0-33.34-generic 5.15.30
Uname: Linux 5.15.0-33-generic x86_64
ApportVersion: 2.20.11-0ubuntu82.1
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander
Use:
USER PID ACCESS COMMAND
/dev/snd/controlC0: sander 1329 F pulseaudio
CRDA: N/A
CasperMD5CheckResult: pass
CurrentDesktop: ubuntu:GNOME
Date: Tue May 31 19:24:02 2022
InstallationDate: Installed on 2022-05-31 (0 days ago)
InstallationMedia: Ubuntu 22.04 LTS &qu
Linux 5.15.0-18-generic x86_64
ApportVersion: 2.20.11-0ubuntu76
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 1230 F pipewire
sander 1231 F pipewire-media-
sande
ProcVersionSignature: Ubuntu 5.15.0-33.34-generic 5.15.30
Uname: Linux 5.15.0-33-generic x86_64
ApportVersion: 2.20.11-0ubuntu82.1
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 1329 F pulseaudio
CRDA: N
-33-generic x86_64
ApportVersion: 2.20.11-0ubuntu82.1
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 1329 F pulseaudio
CRDA: N/A
CasperMD5CheckResult: pass
CurrentDesktop: ubuntu:GNOME
Date: Tue May 31 19:24:02 2022
InstallationDate: Instal
2.04
Package: linux-image-5.15.0-18-generic 5.15.0-18.18
ProcVersionSignature: Ubuntu 5.15.0-18.18-generic 5.15.12
Uname: Linux 5.15.0-18-generic x86_64
ApportVersion: 2.20.11-0ubuntu76
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 1230 F.
x86_64
ApportVersion: 2.20.11-0ubuntu76
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 1239 F pulseaudio
/dev/snd/pcmC0D0p: sander 1239 F...m pulseaudio
/dev/snd/seq:sander 1237 F pipewire
CasperMD5CheckResult
help me solve the
issue.
Happy to perform additional debugging if required.
---
ProblemType: Bug
ApportVersion: 2.20.10-0ubuntu27
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: san
CESS COMMAND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: sander 1527 F pulseaudio
CurrentDesktop: KDE
DistroRelease: Ubuntu 19.04
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
IpRoute:
defa
ND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: sander 1527 F pulseaudio
CurrentDesktop: KDE
DistroRelease: Ubuntu 19.04
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
IpRoute:
default via
ID ACCESS COMMAND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: sander 1527 F pulseaudio
CurrentDesktop: KDE
DistroRelease: Ubuntu 19.04
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
IpRout
standby works perfectly
Of course i want to be able to use the 1525, so please help me solve the
issue.
Happy to perform additional debugging if required.
---
ProblemType: Bug
ApportVersion: 2.20.10-0ubuntu27
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/de
ND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: sander 1527 F pulseaudio
CurrentDesktop: KDE
DistroRelease: Ubuntu 19.04
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
IpRoute:
defa
ND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: sander 1527 F pulseaudio
CurrentDesktop: KDE
DistroRelease: Ubuntu 19.04
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
IpRoute:
default via
standby works perfectly
Of course i want to be able to use the 1525, so please help me solve the
issue.
Happy to perform additional debugging if required.
---
ProblemType: Bug
ApportVersion: 2.20.10-0ubuntu27
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/de
standby works perfectly
Of course i want to be able to use the 1525, so please help me solve the
issue.
Happy to perform additional debugging if required.
---
ProblemType: Bug
ApportVersion: 2.20.10-0ubuntu27
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/de
ND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: sander 1527 F pulseaudio
CurrentDesktop: KDE
DistroRelease: Ubuntu 19.04
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
IpRoute:
default via
PID ACCESS COMMAND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: sander 1527 F pulseaudio
CurrentDesktop: KDE
DistroRelease: Ubuntu 19.04
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
CESS COMMAND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: sander 1527 F pulseaudio
CurrentDesktop: KDE
DistroRelease: Ubuntu 19.04
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
IpRoute:
defa
ND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: sander 1527 F pulseaudio
CurrentDesktop: KDE
DistroRelease: Ubuntu 19.04
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
IpRoute:
defa
ND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: sander 1527 F pulseaudio
CurrentDesktop: KDE
DistroRelease: Ubuntu 19.04
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
IpRoute:
default via
standby works perfectly
Of course i want to be able to use the 1525, so please help me solve the
issue.
Happy to perform additional debugging if required.
---
ProblemType: Bug
ApportVersion: 2.20.10-0ubuntu27
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/de
standby works perfectly
Of course i want to be able to use the 1525, so please help me solve the
issue.
Happy to perform additional debugging if required.
---
ProblemType: Bug
ApportVersion: 2.20.10-0ubuntu27
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/de
PID ACCESS COMMAND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: sander 1527 F pulseaudio
CurrentDesktop: KDE
DistroRelease: Ubuntu 19.04
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
D ACCESS COMMAND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: sander 1527 F pulseaudio
CurrentDesktop: KDE
DistroRelease: Ubuntu 19.04
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
CESS COMMAND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: sander 1527 F pulseaudio
CurrentDesktop: KDE
DistroRelease: Ubuntu 19.04
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
IpRoute:
defa
CESS COMMAND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: sander 1527 F pulseaudio
CurrentDesktop: KDE
DistroRelease: Ubuntu 19.04
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
IpRoute:
defa
orm additional debugging if required.
+ ---
+ ProblemType: Bug
+ ApportVersion: 2.20.10-0ubuntu27
+ Architecture: amd64
+ AudioDevicesInUse:
+ USERPID ACCESS COMMAND
+ /dev/snd/controlC1: sander 1527 F pulseaudio
+ /dev/snd/controlC0: sander 1527 F pulseaudio
+ Curre
CESS COMMAND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: sander 1527 F pulseaudio
CurrentDesktop: KDE
DistroRelease: Ubuntu 19.04
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
IpRoute:
D ACCESS COMMAND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: sander 1527 F pulseaudio
CurrentDesktop: KDE
DistroRelease: Ubuntu 19.04
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
CESS COMMAND
/dev/snd/controlC1: sander 1527 F pulseaudio
/dev/snd/controlC0: sander 1527 F pulseaudio
CurrentDesktop: KDE
DistroRelease: Ubuntu 19.04
IfupdownConfig:
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
IpRoute:
defa
standby works perfectly
Of course i want to be able to use the 1525, so please help me solve the
issue.
Happy to perform additional debugging if required.
---
ProblemType: Bug
ApportVersion: 2.20.10-0ubuntu27
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/de
** Changed in: iptables (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1820114
Title:
iptables v1.6.1: can't initialize iptables table `filter':
I get sometimes the memory allocation error and sometimes a "no chain by
that name":
root@ubu1904:/etc/ctdb# iptables -L
iptables v1.6.1: can't initialize iptables table `filter': Memory allocation
problem
Perhaps iptables or your kernel needs to be upgraded.
root@ubu1904:/etc/ctdb# iptables -L
Confirmed, 4.4.0-119-generic #143 does not solve this problem, still a
hard freeze during boot. Adding "noibpb" to GRUB_CMDLINE_LINUX= in
/etc/default/grub allowed the machine to boot. Interestingly enough my
server is on VMware, so the problem exists there too
--
You received this bug
Unfortunately, this fix breaks Dell XPS 9550 with Samsung PM951 drives.
I now get a hung system due to the Samsung controller getting reset.
Please see https://bugzilla.kernel.org/show_bug.cgi?id=195039 for a
discussion of this issue.
The quirk detection is not complete, I fear
** Bug watch
can not reproduce anymore
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1609107
Title:
Ota13
Status in bluez package in Ubuntu:
New
Bug description:
Without ota13 bluetooth
Public bug reported:
Without ota13 bluetooth doesn't work anymore in my m10 tablet anymore.
Keyboard and mouse donut connct and bluetooth switches itself off all the time.
** Affects: bluez (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because
ere for the last 3 to 4
years accept
for an endless stream of duplicates being appended.
--
Sander
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-lts-raring in Ubuntu.
https://bugs.launchpad.net/bugs/1140716
Title:
[regression] 3.5.0
ere for the last 3 to 4
years accept
for an endless stream of duplicates being appended.
--
Sander
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1041790
Title:
[snb] GPU lockup IPEHR: 0x0
The attachment contains the complete dmesg with drm turned on.
Snippet from around the flip message:
[ 7538.988560] [drm:valleyview_update_wm] Setting FIFO watermarks - A:
plane=111, cursor=2, B: plane=2, cursor=2, SR: plane=60, cursor=2
[ 7538.988565] [drm:intel_set_memory_cxsr] memory
dmesg with drm-debu and flip switch problem
** Attachment added: dmesg with drm-debu and flip switch problem
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1420290/+attachment/4396622/+files/dmesg.with-flip-problem-and-drm-debug.txt
--
You received this bug notification because you
drm.debug=0xe added kernel command line:
$ dmesg | head
[0.00] Initializing cgroup subsys cpuset
[0.00] Initializing cgroup subsys cpu
[0.00] Initializing cgroup subsys cpuacct
[0.00] Linux version 3.19.0-16-generic (buildd@komainu) (gcc version
4.9.2 (Ubuntu
: Ubuntu 3.19.0-12.12-generic 3.19.3
Uname: Linux 3.19.0-12-generic x86_64
ApportVersion: 2.17-0ubuntu1
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 1576 F pulseaudio
CurrentDesktop: Unity
Date: Sun Apr 5 14:13:35 2015
HibernationDevice
-12.12-generic 3.19.3
Uname: Linux 3.19.0-12-generic x86_64
ApportVersion: 2.17-0ubuntu1
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 1612 F pulseaudio
CurrentDesktop: Unity
Date: Sat Apr 4 23:39:09 2015
HibernationDevice
: sander 1612 F pulseaudio
CurrentDesktop: Unity
Date: Sat Apr 4 23:39:09 2015
HibernationDevice: RESUME=UUID=1cce7297-b185-4592-a4a0-dfdc069ad5a1
InstallationDate: Installed on 2015-02-03 (59 days ago)
InstallationMedia: Ubuntu 15.04 Vivid Vervet - Alpha amd64 (20150203)
MachineType
: sander 1612 F pulseaudio
CurrentDesktop: Unity
Date: Sat Apr 4 23:39:09 2015
HibernationDevice: RESUME=UUID=1cce7297-b185-4592-a4a0-dfdc069ad5a1
InstallationDate: Installed on 2015-02-03 (59 days ago)
InstallationMedia: Ubuntu 15.04 Vivid Vervet - Alpha amd64 (20150203)
MachineType: Hewlett
Still (again?) happening with 3.19.0-12-generic
[ 5578.584172] [ cut here ]
[ 5578.584230] WARNING: CPU: 0 PID: 15321 at
/build/buildd/linux-3.19.0/drivers/gpu/drm/i915/intel_display.c:9713
intel_check_page_flip+0xda/0xf0 [i915]()
[ 5578.584233] Kicking stuck page flip:
The error occured twice in the last 24 hours:
$ cat /var/log/kern.log | grep -i flip
Mar 2 23:13:04 superstreamer kernel: [ 3283.556389] WARNING: CPU: 0 PID: 0 at
/home/kernel/COD/linux/drivers/gpu/drm/i915/intel_display.c:9698
intel_check_page_flip+0xe6/0xf0 [i915]()
Mar 2 23:13:04
I never close the lid immediately after booting, so in my case that
cannot have been the cause.
So far I have not found a correlation between the intel drm flip error
and things I did. Sometimes the error occurs after an hour, sometimes
not for two days. Now it is even 5 days ago:
$ cat
FWIW: I searched for [drm:intel_pipe_update_end [i915]] *ERROR* Atomic
update failure on pipe A (start=76355 end=76356) and found this source
code on http://lists.freedesktop.org/archives/intel-
gfx/2014-February/040161.html doing the Atomic update failure on pipe:
115 static void
FWIW: 12 seconds before the described problem, there is this line in
dmesg:
[drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe
A (start=76355 end=76356)
which I can't find on Google.
More from dmesg:
$ dmesg | grep Linux version
[0.00] Linux version
After 24 hours of use, still no slub.c error message in dmesg.
$ dmesg | grep -i slub
[0.00] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[0.00] Linux version 3.18.0-13-generic (root@gloin) (gcc version
4.9.2 (Ubuntu 4.9.2-10ubuntu5) ) #14 SMP Tue Feb 17 11:13:29
Thanks! I'll do that tonight.
Question: should I install all four debs, so also the linux-image-extra?
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1418286
Title:
kernel BUG at
OK, now running that new kernel. Well, at least I think it is, but it
says:
$ uname -a
Linux superstreamer 3.18.0-13-generic #14-Ubuntu SMP Fri Feb 6 09:55:14 UTC
2015 x86_64 x86_64 x86_64 GNU/Linux
Made on Feb 6? Can that be right? There was no sign of
3.18.0-13.14~lp1418286v1 in my Grub menu,
Thanks.
Current situtation:
sander@superstreamer:~$ uptime dmesg | grep -i -e Linux version -e slub
22:22:32 up 2:59, 1 user, load average: 1,74, 0,90, 0,70
[0.00] Linux version 3.18.0-13-generic (buildd@komainu) (gcc version
4.9.2 (Ubuntu 4.9.2-10ubuntu5) ) #14-Ubuntu SMP Fri Feb
Rebooted, and same result
sander@superstreamer:~$ uname -a
Linux superstreamer 3.18.0-13-generic #14-Ubuntu SMP Fri Feb 6 09:55:14 UTC
2015 x86_64 x86_64 x86_64 GNU/Linux
sander@superstreamer:~$
sander@superstreamer:~$ dpkg -l | grep -e linux-image- -e ^|
| Status=Not/Inst/Conf-files/Unpacked
After the autoremove purge, reboot into 3.19, and a fresh install of
your kernel debs, things look better:
sander@superstreamer:~$ dmesg | grep -i -e Linux version -e slub
[0.00] Linux version 3.18.0-13-generic (root@gloin) (gcc version 4.9.2
(Ubuntu 4.9.2-10ubuntu5) ) #14 SMP Tue Feb
Ouch, it's still there in 3.18.0-13-generic:
sander@superstreamer:~$ uname -a
Linux superstreamer 3.18.0-13-generic #14-Ubuntu SMP Fri Feb 6 09:55:14 UTC
2015 x86_64 x86_64 x86_64 GNU/Linux
sander@superstreamer:~$
sander@superstreamer:~$ dmesg | grep -i slub
[0.00] SLUB: HWalign=64
full dmesg
** Attachment added: dmesg-3.18.0-13-generic.txt
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1418286/+attachment/4319682/+files/dmesg-3.18.0-13-generic.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in
Running 3.19.0-994-generic #201502112105 from http://kernel.ubuntu.com
/~kernel-ppa/mainline/drm-intel-nightly/2015-02-12-vivid/ and now dmesg
shows a warning in a different line of intel_display.c:
[ 2702.807816] WARNING: CPU: 0 PID: 3 at
Solved by installing the kernel from http://kernel.ubuntu.com/~kernel-
ppa/mainline/daily/2015-02-10-vivid/ leading to 3.19.0-999-generic
#201502092105
According to https://bugzilla.kernel.org/show_bug.cgi?id=92981 the
kernel on http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.19-vivid/ was
built
Public bug reported:
Running Vivid with kernel 3.19 (debs from http://kernel.ubuntu.com
/~kernel-ppa/mainline/v3.19-vivid/), I get the warning below in dmesg.
I can't use ubuntu-bug linux because I get It appears you are
currently running a mainline kernel. It would be better to report this
bug
** Attachment added: lspci-vnvn.log
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1420290/+attachment/4316320/+files/lspci-vnvn.log
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
These seem the same bug reports on Redhat, since january
https://bugzilla.redhat.com/show_bug.cgi?id=1190511
https://bugzilla.redhat.com/show_bug.cgi?id=1181071
https://bugzilla.redhat.com/show_bug.cgi?id=1184161
https://bugzilla.redhat.com/show_bug.cgi?id=1183209
** Bug watch added: Red Hat
FWIW:
I'm now running the latest 3.18 (3.18.0-13-generic) which arrived today
(Feb 10), and no more slub.c messages in dmesg.
So ... was it solved in 3.18.0-13-generic?
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
FWIW:
I also installed the lowlatency version of kernel 3.19, and that dmesg
doesn't show the lines Request for unknown module key 'Magrathea:
Glacier signing key:
sander@superstreamer:~$ uname -a
Linux superstreamer 3.19.0-031900-lowlatency #201502091451 SMP PREEMPT Mon Feb
9 14:58:45 UTC 2015
I just installed kernel 3.19 on vivid (source: http://kernel.ubuntu.com
/~kernel-ppa/mainline/v3.19-vivid/), and dmesg shows 129 lines with
Request for unknown module key 'Magrathea: Glacier signing key:
007271576a09d86ef244371b0633e47abb75b89d' err -11
So ... is this a regression bug? Or
@myself:
It was a noob thing indeed:
I had
linux-headers-3.19.0-031900rc7-generic_3.19.0-031900rc7.201502020035_amd64.deb
linux-image-3.19.0-031900rc7-generic_3.19.0-031900rc7.201502020035_amd64.deb
and needed the all.deb file too:
dpkg -i *031900rc7-generic_3.19.0*deb
and the kernel itself went OK, but the headers didn't:
Errors were encountered while processing:
linux-headers-3.19.0-031900rc7-generic
But could be a noob thing, but I can't find it. Tips welcome
Full log:
sander@superstreamer:~/Downloads/3.19.0
Happens on my system too. I did a fresh install of Vivid daily two days
ago (Feb 3), did a update/upgrade today (Feb 5), and after the reboot
dmesg shows:
[ 11.252422] [ cut here ]
[ 11.252475] kernel BUG at /build/buildd/linux-3.18.0/mm/slub.c:3334!
[ 11.252526]
ProcVersionSignature: Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13
Uname: Linux 3.13.0-45-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.6
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 1876 F pulseaudio
CurrentDesktop: Unity
Date
FWIW: the Read-only file system error occured again. See below.
Nothing special in dmesg nor /var/log/syslog
sander@superstream:~$ pwd
/home/sander
sander@superstream:~$ touch blabla
touch: cannot touch ‘blabla’: Read-only file system
sander@superstream:~$ mount
/dev/mmcblk0p5 on / type ext4
-generic 3.13.0-45.74
ProcVersionSignature: Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13
Uname: Linux 3.13.0-45-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.6
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 1876 F pulseaudio
-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.6
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 1876 F pulseaudio
CurrentDesktop: Unity
Date: Mon Feb 2 21:41:26 2015
HibernationDevice: RESUME=UUID=1cce7297-b185-4592-a4a0
Uname: Linux 3.13.0-45-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.6
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 1876 F pulseaudio
CurrentDesktop: Unity
Date: Mon Feb 2 21:41:26 2015
HibernationDevice: RESUME=UUID=1cce7297-b185-4592
ACCESS COMMAND
/dev/snd/controlC0: sander 4909 F pulseaudio
CRDA:
country BE:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 40), (N/A, 20)
(5250 - 5330 @ 40), (N/A, 20), DFS
(5490 - 5710 @ 40), (N/A, 27), DFS
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 4909 F pulseaudio
CRDA:
country BE:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 40), (N/A, 20)
(5250 - 5330 @ 40), (N/A, 20), DFS
(5490 - 5710 @ 40), (N/A, 27), DFS
Card0.Amixer.info
card 0: Intel [HDA Intel], device 0: ALC269 Analog [ALC269 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 4909 F pulseaudio
CRDA:
country BE:
(2402 - 2482 @ 40), (N/A, 20
card 0: Intel [HDA Intel], device 0: ALC269 Analog [ALC269 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 4909 F pulseaudio
CRDA:
country BE:
(2402 - 2482 @ 40), (N/A, 20
COMMAND
/dev/snd/controlC0: sander 4909 F pulseaudio
CRDA:
country BE:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 40), (N/A, 20)
(5250 - 5330 @ 40), (N/A, 20), DFS
(5490 - 5710 @ 40), (N/A, 27), DFS
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xf7eb8000
Architecture: i386
ArecordDevices:
List of CAPTURE Hardware Devices
card 0: Intel [HDA Intel], device 0: ALC269 Analog [ALC269 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sander 4909 F pulseaudio
CRDA
-0ubuntu3.6
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC1: sander 2545 F pulseaudio
/dev/snd/controlC0: sander 2545 F pulseaudio
/dev/snd/pcmC0D0p: sander 2545 F...m pulseaudio
CRDA: Error: [Errno 2] Bestand of map
by:
http://forum.xbmc.org/printthread.php?tid=71490
---
ApportVersion: 2.14.1-0ubuntu3.6
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC1: sander 2545 F pulseaudio
/dev/snd/controlC0: sander 2545 F pulseaudio
/dev/snd
What is your question? I can suspend/resume with this old computer with
this stick inserted but not in playing mode, but I can't install a newer
Ubuntu release on it.
--
Kind Regards,
Sander Devrieze.
Op 22 dec. 2014 02:45 schreef Christopher M. Penalver
christopher.m.penal...@gmail.com
This solution was inspired by:
http://forum.xbmc.org/printthread.php?tid=71490
---
ApportVersion: 2.14.1-0ubuntu3.6
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC1: sander 2545 F pulseaudio
/dev/snd/controlC0: sander 2545 F
I will check later this week when I have time.
You changed the summary. I'm not sure if this makes a difference, but I
think something goes wrong during suspending and not from waking up from
suspension state.
--
Mvg, Sander Devrieze.
2014-12-14 20:58 GMT+01:00 Christopher M. Penalver
localhost 4212 -q 1 /dev/null
;;
*) exit $NA
;;
esac
This solution was inspired by:
http://forum.xbmc.org/printthread.php?tid=71490
---
ApportVersion: 2.14.1-0ubuntu3.6
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC1: sander 2545
1 - 100 of 151 matches
Mail list logo
