[Kernel-packages] [Bug 1279403] Re: udlfd video driver hangs " BUG: scheduling while atomic " iscsi booted initrd : (trusty)
** Changed in: linux (Ubuntu) Status: Triaged => Invalid ** Changed in: linux-ppc (Ubuntu) Status: Triaged => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279403 Title: udlfd video driver hangs " BUG: scheduling while atomic " iscsi booted initrd : (trusty) Status in linux package in Ubuntu: Invalid Status in linux-ppc package in Ubuntu: Invalid Bug description: Testing saucy iscsi target booted on e500mc default initrd hangs when tg3 driver started. saucy was installed to an iSCSI target using the interactive setup from: http://ports.ubuntu.com/dists/saucy/main/installer-powerpc/current/images/e500mc/netboot/vmlinux http://ports.ubuntu.com/dists/saucy/main/installer-powerpc/current/images/e500mc/netboot/initrd.gz Linux version 3.11.0-5-powerpc-e500mc initrd.img-3.11.0-5-powerpc-e500mc Booted from flash USB to simulate a pxe boot. svy-boot# svy-boot# mount /dev/sda1 /mnt svy-boot# cd /mnt/iscsi2 svy-boot# ./go.sh /sbin/kexec --command='root=/dev/ram ro UUID=1cfe9f29-e188-4e00-ac47-3bf2245b117f ro break debug interface=eth4 console=tty0 console=ttyS0,115200 dhcp ISCSI_INITIATOR=iqn.1993-08.org.debian:01:53694d75a62e ISCSI_TARGET_NAME=iqn.2001-04.com.jade:storage.disk0 ISCSI_TARGET_IP=192.168.1.140 ISCSI_TARGET_PORT=3260 ISCSI_TARGET_GROUP=1 ' --initrd=/mnt/iscsi2/initrd.img-3.11.0-5-powerpc-e500mc -l /mnt/iscsi2/vmlinux-3.11.0-5-powerpc-e500mc with break enabled I can enter cli in the initramfs -> This is embedded fsl eth1 ( 1Gbe ) with a cable : (initramfs) ipconfig -t 10 -c dhcp -d eth1 & (initramfs) IP-Config: eth1 hardware address 02:30:b0:00:10:01 mtu 1500 DHCP IP-Config: no response after 10 secs - giving up -> System is alive ( I have a prompt ) - The above SHOULD HAVE WORKED since it is an active port. This is embedded fsl eth1 - (10Gbe) - No cable (initramfs) ipconfig -t 10 -c dhcp -d eth0 & (initramfs) (initramfs) IP-Config: eth0 hardware address 02:30:b0:00:10:00 mtu 1500 DHCP IP-Config: no response after 10 secs - giving up -> System is alive ( I have a prompt) tg3 stand up card in pci-e slot: (initramfs) ipconfig -t 10 -c dhcp -d eth4 & (initramfs) (initramfs) [ 218.394187] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready (initramfs) (initramfs) [ 221.268533] tg3 :01:00.1 eth4: Link is up at 1000 Mbps, full duplex < hung > iSCSI target information: Server: CentOS 6.4 .x64 . #passwd setup # # tgtadm --lld iscsi --op new --mode account --user ronnie --password password # tgtadm --lld iscsi --op bind --mode account --tid 1 --user ronnie # # dd if=/dev/zero of=iscsi.disk0 bs=1024M count=10 tgtadm --lld iscsi --op delete --mode target --tid 1 tgtadm --lld iscsi --op new --mode target --tid 1 -T iqn.2001-04.com.jade:storage.disk0 tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 1 -b `pwd`/iscsi.disk0 tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL tgtadm --lld iscsi --op show --mode target To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279403/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279403] Re: udlfd video driver hangs " BUG: scheduling while atomic " iscsi booted initrd : (trusty)
Servergy closed in 2015 after SEC stock fraud scandal. This bug is no longer relevant. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279403 Title: udlfd video driver hangs " BUG: scheduling while atomic " iscsi booted initrd : (trusty) Status in linux package in Ubuntu: Triaged Status in linux-ppc package in Ubuntu: Triaged Bug description: Testing saucy iscsi target booted on e500mc default initrd hangs when tg3 driver started. saucy was installed to an iSCSI target using the interactive setup from: http://ports.ubuntu.com/dists/saucy/main/installer-powerpc/current/images/e500mc/netboot/vmlinux http://ports.ubuntu.com/dists/saucy/main/installer-powerpc/current/images/e500mc/netboot/initrd.gz Linux version 3.11.0-5-powerpc-e500mc initrd.img-3.11.0-5-powerpc-e500mc Booted from flash USB to simulate a pxe boot. svy-boot# svy-boot# mount /dev/sda1 /mnt svy-boot# cd /mnt/iscsi2 svy-boot# ./go.sh /sbin/kexec --command='root=/dev/ram ro UUID=1cfe9f29-e188-4e00-ac47-3bf2245b117f ro break debug interface=eth4 console=tty0 console=ttyS0,115200 dhcp ISCSI_INITIATOR=iqn.1993-08.org.debian:01:53694d75a62e ISCSI_TARGET_NAME=iqn.2001-04.com.jade:storage.disk0 ISCSI_TARGET_IP=192.168.1.140 ISCSI_TARGET_PORT=3260 ISCSI_TARGET_GROUP=1 ' --initrd=/mnt/iscsi2/initrd.img-3.11.0-5-powerpc-e500mc -l /mnt/iscsi2/vmlinux-3.11.0-5-powerpc-e500mc with break enabled I can enter cli in the initramfs -> This is embedded fsl eth1 ( 1Gbe ) with a cable : (initramfs) ipconfig -t 10 -c dhcp -d eth1 & (initramfs) IP-Config: eth1 hardware address 02:30:b0:00:10:01 mtu 1500 DHCP IP-Config: no response after 10 secs - giving up -> System is alive ( I have a prompt ) - The above SHOULD HAVE WORKED since it is an active port. This is embedded fsl eth1 - (10Gbe) - No cable (initramfs) ipconfig -t 10 -c dhcp -d eth0 & (initramfs) (initramfs) IP-Config: eth0 hardware address 02:30:b0:00:10:00 mtu 1500 DHCP IP-Config: no response after 10 secs - giving up -> System is alive ( I have a prompt) tg3 stand up card in pci-e slot: (initramfs) ipconfig -t 10 -c dhcp -d eth4 & (initramfs) (initramfs) [ 218.394187] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready (initramfs) (initramfs) [ 221.268533] tg3 :01:00.1 eth4: Link is up at 1000 Mbps, full duplex < hung > iSCSI target information: Server: CentOS 6.4 .x64 . #passwd setup # # tgtadm --lld iscsi --op new --mode account --user ronnie --password password # tgtadm --lld iscsi --op bind --mode account --tid 1 --user ronnie # # dd if=/dev/zero of=iscsi.disk0 bs=1024M count=10 tgtadm --lld iscsi --op delete --mode target --tid 1 tgtadm --lld iscsi --op new --mode target --tid 1 -T iqn.2001-04.com.jade:storage.disk0 tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 1 -b `pwd`/iscsi.disk0 tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL tgtadm --lld iscsi --op show --mode target To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279403/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1279403] Re: udlfd video driver hangs BUG: scheduling while atomic iscsi booted initrd : (trusty)
** Summary changed: - udlfd video driver hangs in iscsi booted initrd : (trusty) + udlfd video driver hangs BUG: scheduling while atomiciscsi booted initrd : (trusty) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1279403 Title: udlfd video driver hangs BUG: scheduling while atomiciscsi booted initrd : (trusty) Status in “linux” package in Ubuntu: Triaged Status in “linux-ppc” package in Ubuntu: Triaged Bug description: Testing saucy iscsi target booted on e500mc default initrd hangs when tg3 driver started. saucy was installed to an iSCSI target using the interactive setup from: http://ports.ubuntu.com/dists/saucy/main/installer-powerpc/current/images/e500mc/netboot/vmlinux http://ports.ubuntu.com/dists/saucy/main/installer-powerpc/current/images/e500mc/netboot/initrd.gz Linux version 3.11.0-5-powerpc-e500mc initrd.img-3.11.0-5-powerpc-e500mc Booted from flash USB to simulate a pxe boot. svy-boot# svy-boot# mount /dev/sda1 /mnt svy-boot# cd /mnt/iscsi2 svy-boot# ./go.sh /sbin/kexec --command='root=/dev/ram ro UUID=1cfe9f29-e188-4e00-ac47-3bf2245b117f ro break debug interface=eth4 console=tty0 console=ttyS0,115200 dhcp ISCSI_INITIATOR=iqn.1993-08.org.debian:01:53694d75a62e ISCSI_TARGET_NAME=iqn.2001-04.com.jade:storage.disk0 ISCSI_TARGET_IP=192.168.1.140 ISCSI_TARGET_PORT=3260 ISCSI_TARGET_GROUP=1 ' --initrd=/mnt/iscsi2/initrd.img-3.11.0-5-powerpc-e500mc -l /mnt/iscsi2/vmlinux-3.11.0-5-powerpc-e500mc with break enabled I can enter cli in the initramfs - This is embedded fsl eth1 ( 1Gbe ) with a cable : (initramfs) ipconfig -t 10 -c dhcp -d eth1 (initramfs) IP-Config: eth1 hardware address 02:30:b0:00:10:01 mtu 1500 DHCP IP-Config: no response after 10 secs - giving up - System is alive ( I have a prompt ) - The above SHOULD HAVE WORKED since it is an active port. This is embedded fsl eth1 - (10Gbe) - No cable (initramfs) ipconfig -t 10 -c dhcp -d eth0 (initramfs) (initramfs) IP-Config: eth0 hardware address 02:30:b0:00:10:00 mtu 1500 DHCP IP-Config: no response after 10 secs - giving up - System is alive ( I have a prompt) tg3 stand up card in pci-e slot: (initramfs) ipconfig -t 10 -c dhcp -d eth4 (initramfs) (initramfs) [ 218.394187] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready (initramfs) (initramfs) [ 221.268533] tg3 :01:00.1 eth4: Link is up at 1000 Mbps, full duplex hung iSCSI target information: Server: CentOS 6.4 .x64 . #passwd setup # # tgtadm --lld iscsi --op new --mode account --user ronnie --password password # tgtadm --lld iscsi --op bind --mode account --tid 1 --user ronnie # # dd if=/dev/zero of=iscsi.disk0 bs=1024M count=10 tgtadm --lld iscsi --op delete --mode target --tid 1 tgtadm --lld iscsi --op new --mode target --tid 1 -T iqn.2001-04.com.jade:storage.disk0 tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 1 -b `pwd`/iscsi.disk0 tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL tgtadm --lld iscsi --op show --mode target To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1279403/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
