[Kernel-packages] [Bug 1491494] Comment bridged from LTC Bugzilla
--- Comment From cdead...@us.ibm.com 2018-12-07 12:55 EDT--- This CMVC defect is being cancelled by the CDE Bridge because the corresponding CQ Defect [SW317564] was transferred out of the bridge domain. Here are the additional details: New Subsystem = ppc_triage New Release = unspecified New Component = ubuntu_linux New OwnerInfo = Chavez, Luciano (cha...@us.ibm.com) To continue tracking this issue, please follow CQ defect [SW317564]. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1491494 Title: Ubuntu 14.04.03 LPAR hits kernel oops after serial adapter is removed from profile Status in linux package in Ubuntu: Triaged Bug description: -- Problem Description -- The failure related to the BELL-3 (2 port-Async EIA-232 adapter). Ubuntu always hit exception when the adapter is not present. See my test scenarios below. Test #1: Boot Ubuntu with BELL-3 adapter === - The Ubuntu LPAR was running with the BELL-3 (2 port-Async EIA-232 adapter) before. So I assigned the BELL-3 adapter to Ubuntu LPAR profile and powered on the LPAR. => Ubuntu boot fine this time. Test #2: Boot Ubuntu with BELL-3 adapter removed from LPAR profile === - I powered down the Ubuntu partition and removed the BELL-3 adapter from LPAR profile then powered on the LPAR. => Ubuntu hit the exception. Elapsed time since release of system processors: 0 mins 9 secs error: no suitable video mode found. OF stdout device is: /vdevice/vty@3000 Preparing to boot Linux version 3.19.0-23-generic (buildd@denneed03) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #24~14.04.1-Ubuntu SMP Wed Jul 8 11:17:19 UTC 2015 (Ubuntu 3.19.0-23.24~14.04.1-generic 3.19.8-ckt2) Detected machine type: 0101 Max number of cores passed to firmware: 256 (NR_CPUS = 2048) Calling ibm,client-architecture-support... done command line: BOOT_IMAGE=/boot/vmlinux-3.19.0-23-generic root=UUID=768190e7-f633-4c63-a1e3-588d12dea265 ro quiet splash vt.handoff=7 memory layout at init: memory_limit : (16 MB aligned) alloc_bottom : 0b42 alloc_top: 1000 alloc_top_hi : 1000 rmo_top : 1000 ram_top : 1000 instantiating rtas at 0x0ecb... done prom_hold_cpus: skipped copying OF device tree... Building dt strings... Building dt structure... Device tree strings 0x0b43 -> 0x0b4316b1 Device tree struct 0x0b44 -> 0x0b47 Calling quiesce... returning from prom_init -> smp_release_cpus() spinning_secondaries = 15 <- smp_release_cpus() <- setup_system() [0.661510] /build/linux-lts-vivid-uV14Ja/linux-lts-vivid-3.19.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [0.672826] sd 0:0:1:0: [sda] Assuming drive cache: write through [4.658302] device-mapper: table: 252:0: multipath: error getting device [4.691990] device-mapper: table: 252:0: multipath: error getting device [4.934034] device-mapper: table: 252:0: multipath: error getting device [4.951977] device-mapper: table: 252:0: multipath: error getting device * Discovering and coalescing multipaths... [ OK ] Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd * Starting AppArmor profiles[ OK ] Loading the saved-state of the serial devices... [5.109665] Unable to handle kernel paging request for data at address 0xd803 [5.109677] Faulting instruction address: 0xc060fec4 [5.109685] Oops: Kernel access of bad area, sig: 11 [#1] [5.109691] SMP NR_CPUS=2048 NUMA pSeries [5.109699] Modules linked in: dm_round_robin dm_multipath scsi_dh pseries_rng rtc_generic knem(OE) nfsd auth_rpcgss nfs_acl nfs lockd grace sunrpc fscache rdma_ucm(OE) ib_ucm(OE) rdma_cm(OE) iw_cm(OE) configfs ib_ipoib(OE) ib_cm(OE) ib_uverbs(OE) ib_umad(OE) mlx5_ib(OE) mlx5_core(OE) mlx4_ib(OE) ib_sa(OE) ib_mad(OE) ib_core(OE) ib_addr(OE) mlx4_en(OE) mlx4_core(OE) mlx_compat(OE) [5.109759] CPU: 1 PID: 1816 Comm: setserial Tainted: G OE 3.19.0-23-generic #24~14.04.1-Ubuntu [5.109769] task: c000f389c880 ti: c000f0528000 task.ti: c000f0528000 [5.109777] NIP: c060fec4 LR: c0617498 CTR: c060fe20 [5.109785] REGS: c000f052b6b0 TRAP: 0300 Tainted: G OE (3.19.0-23-generic) [5.109793] MSR: 80009033 CR: 84002022 XER: [5.109814] CFAR: c0008468 DAR: d803 DSISR: 4200 SOFTE: 1 GPR00: c0617498 c000f052b930 c144c700 00bf GPR04: d803 00bf c000f399 0141 GPR08: c0611d20
[Kernel-packages] [Bug 1491494] Comment bridged from LTC Bugzilla
--- Comment From bjki...@us.ibm.com 2018-12-07 12:38 EDT--- Rejecting this very old bug. Please reopen if this issue occurs on a current version of Ubuntu. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1491494 Title: Ubuntu 14.04.03 LPAR hits kernel oops after serial adapter is removed from profile Status in linux package in Ubuntu: Triaged Bug description: -- Problem Description -- The failure related to the BELL-3 (2 port-Async EIA-232 adapter). Ubuntu always hit exception when the adapter is not present. See my test scenarios below. Test #1: Boot Ubuntu with BELL-3 adapter === - The Ubuntu LPAR was running with the BELL-3 (2 port-Async EIA-232 adapter) before. So I assigned the BELL-3 adapter to Ubuntu LPAR profile and powered on the LPAR. => Ubuntu boot fine this time. Test #2: Boot Ubuntu with BELL-3 adapter removed from LPAR profile === - I powered down the Ubuntu partition and removed the BELL-3 adapter from LPAR profile then powered on the LPAR. => Ubuntu hit the exception. Elapsed time since release of system processors: 0 mins 9 secs error: no suitable video mode found. OF stdout device is: /vdevice/vty@3000 Preparing to boot Linux version 3.19.0-23-generic (buildd@denneed03) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #24~14.04.1-Ubuntu SMP Wed Jul 8 11:17:19 UTC 2015 (Ubuntu 3.19.0-23.24~14.04.1-generic 3.19.8-ckt2) Detected machine type: 0101 Max number of cores passed to firmware: 256 (NR_CPUS = 2048) Calling ibm,client-architecture-support... done command line: BOOT_IMAGE=/boot/vmlinux-3.19.0-23-generic root=UUID=768190e7-f633-4c63-a1e3-588d12dea265 ro quiet splash vt.handoff=7 memory layout at init: memory_limit : (16 MB aligned) alloc_bottom : 0b42 alloc_top: 1000 alloc_top_hi : 1000 rmo_top : 1000 ram_top : 1000 instantiating rtas at 0x0ecb... done prom_hold_cpus: skipped copying OF device tree... Building dt strings... Building dt structure... Device tree strings 0x0b43 -> 0x0b4316b1 Device tree struct 0x0b44 -> 0x0b47 Calling quiesce... returning from prom_init -> smp_release_cpus() spinning_secondaries = 15 <- smp_release_cpus() <- setup_system() [0.661510] /build/linux-lts-vivid-uV14Ja/linux-lts-vivid-3.19.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [0.672826] sd 0:0:1:0: [sda] Assuming drive cache: write through [4.658302] device-mapper: table: 252:0: multipath: error getting device [4.691990] device-mapper: table: 252:0: multipath: error getting device [4.934034] device-mapper: table: 252:0: multipath: error getting device [4.951977] device-mapper: table: 252:0: multipath: error getting device * Discovering and coalescing multipaths... [ OK ] Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd * Starting AppArmor profiles[ OK ] Loading the saved-state of the serial devices... [5.109665] Unable to handle kernel paging request for data at address 0xd803 [5.109677] Faulting instruction address: 0xc060fec4 [5.109685] Oops: Kernel access of bad area, sig: 11 [#1] [5.109691] SMP NR_CPUS=2048 NUMA pSeries [5.109699] Modules linked in: dm_round_robin dm_multipath scsi_dh pseries_rng rtc_generic knem(OE) nfsd auth_rpcgss nfs_acl nfs lockd grace sunrpc fscache rdma_ucm(OE) ib_ucm(OE) rdma_cm(OE) iw_cm(OE) configfs ib_ipoib(OE) ib_cm(OE) ib_uverbs(OE) ib_umad(OE) mlx5_ib(OE) mlx5_core(OE) mlx4_ib(OE) ib_sa(OE) ib_mad(OE) ib_core(OE) ib_addr(OE) mlx4_en(OE) mlx4_core(OE) mlx_compat(OE) [5.109759] CPU: 1 PID: 1816 Comm: setserial Tainted: G OE 3.19.0-23-generic #24~14.04.1-Ubuntu [5.109769] task: c000f389c880 ti: c000f0528000 task.ti: c000f0528000 [5.109777] NIP: c060fec4 LR: c0617498 CTR: c060fe20 [5.109785] REGS: c000f052b6b0 TRAP: 0300 Tainted: G OE (3.19.0-23-generic) [5.109793] MSR: 80009033 CR: 84002022 XER: [5.109814] CFAR: c0008468 DAR: d803 DSISR: 4200 SOFTE: 1 GPR00: c0617498 c000f052b930 c144c700 00bf GPR04: d803 00bf c000f399 0141 GPR08: c0611d20 c13539e0 d800 c1351ba8 GPR12: c060fe20 ce830900 GPR16: GPR20: 007d 0040
[Kernel-packages] [Bug 1491494] Comment bridged from LTC Bugzilla
--- Comment From cdead...@us.ibm.com 2016-12-07 15:36 EDT--- -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1491494 Title: Ubuntu 14.04.03 LPAR hits kernel oops after serial adapter is removed from profile Status in linux package in Ubuntu: Triaged Bug description: -- Problem Description -- The failure related to the BELL-3 (2 port-Async EIA-232 adapter). Ubuntu always hit exception when the adapter is not present. See my test scenarios below. Test #1: Boot Ubuntu with BELL-3 adapter === - The Ubuntu LPAR was running with the BELL-3 (2 port-Async EIA-232 adapter) before. So I assigned the BELL-3 adapter to Ubuntu LPAR profile and powered on the LPAR. => Ubuntu boot fine this time. Test #2: Boot Ubuntu with BELL-3 adapter removed from LPAR profile === - I powered down the Ubuntu partition and removed the BELL-3 adapter from LPAR profile then powered on the LPAR. => Ubuntu hit the exception. Elapsed time since release of system processors: 0 mins 9 secs error: no suitable video mode found. OF stdout device is: /vdevice/vty@3000 Preparing to boot Linux version 3.19.0-23-generic (buildd@denneed03) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #24~14.04.1-Ubuntu SMP Wed Jul 8 11:17:19 UTC 2015 (Ubuntu 3.19.0-23.24~14.04.1-generic 3.19.8-ckt2) Detected machine type: 0101 Max number of cores passed to firmware: 256 (NR_CPUS = 2048) Calling ibm,client-architecture-support... done command line: BOOT_IMAGE=/boot/vmlinux-3.19.0-23-generic root=UUID=768190e7-f633-4c63-a1e3-588d12dea265 ro quiet splash vt.handoff=7 memory layout at init: memory_limit : (16 MB aligned) alloc_bottom : 0b42 alloc_top: 1000 alloc_top_hi : 1000 rmo_top : 1000 ram_top : 1000 instantiating rtas at 0x0ecb... done prom_hold_cpus: skipped copying OF device tree... Building dt strings... Building dt structure... Device tree strings 0x0b43 -> 0x0b4316b1 Device tree struct 0x0b44 -> 0x0b47 Calling quiesce... returning from prom_init -> smp_release_cpus() spinning_secondaries = 15 <- smp_release_cpus() <- setup_system() [0.661510] /build/linux-lts-vivid-uV14Ja/linux-lts-vivid-3.19.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [0.672826] sd 0:0:1:0: [sda] Assuming drive cache: write through [4.658302] device-mapper: table: 252:0: multipath: error getting device [4.691990] device-mapper: table: 252:0: multipath: error getting device [4.934034] device-mapper: table: 252:0: multipath: error getting device [4.951977] device-mapper: table: 252:0: multipath: error getting device * Discovering and coalescing multipaths... [ OK ] Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd * Starting AppArmor profiles[ OK ] Loading the saved-state of the serial devices... [5.109665] Unable to handle kernel paging request for data at address 0xd803 [5.109677] Faulting instruction address: 0xc060fec4 [5.109685] Oops: Kernel access of bad area, sig: 11 [#1] [5.109691] SMP NR_CPUS=2048 NUMA pSeries [5.109699] Modules linked in: dm_round_robin dm_multipath scsi_dh pseries_rng rtc_generic knem(OE) nfsd auth_rpcgss nfs_acl nfs lockd grace sunrpc fscache rdma_ucm(OE) ib_ucm(OE) rdma_cm(OE) iw_cm(OE) configfs ib_ipoib(OE) ib_cm(OE) ib_uverbs(OE) ib_umad(OE) mlx5_ib(OE) mlx5_core(OE) mlx4_ib(OE) ib_sa(OE) ib_mad(OE) ib_core(OE) ib_addr(OE) mlx4_en(OE) mlx4_core(OE) mlx_compat(OE) [5.109759] CPU: 1 PID: 1816 Comm: setserial Tainted: G OE 3.19.0-23-generic #24~14.04.1-Ubuntu [5.109769] task: c000f389c880 ti: c000f0528000 task.ti: c000f0528000 [5.109777] NIP: c060fec4 LR: c0617498 CTR: c060fe20 [5.109785] REGS: c000f052b6b0 TRAP: 0300 Tainted: G OE (3.19.0-23-generic) [5.109793] MSR: 80009033CR: 84002022 XER: [5.109814] CFAR: c0008468 DAR: d803 DSISR: 4200 SOFTE: 1 GPR00: c0617498 c000f052b930 c144c700 00bf GPR04: d803 00bf c000f399 0141 GPR08: c0611d20 c13539e0 d800 c1351ba8 GPR12: c060fe20 ce830900 GPR16: GPR20: 007d 0040 GPR24: c000f53cbc00 0001
[Kernel-packages] [Bug 1491494] Comment bridged from LTC Bugzilla
--- Comment From cdead...@us.ibm.com 2015-10-27 13:55 EDT--- State: Assigned by: mgrosch on 27 October 2015 08:45:48 #=#=# 2015-10-27 08:45:46 (CDT) #=#=# New Fix_Potential = [GSI_HDW] New Priority_Justification = [Since there is a workaround not deeming stop ship but needs to be resolved in a future Ubuntu Linux release] #=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=# > -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1491494 Title: Ubuntu 14.04.03 LPAR hits kernel oops after serial adapter is removed from profile Status in linux package in Ubuntu: Triaged Bug description: -- Problem Description -- The failure related to the BELL-3 (2 port-Async EIA-232 adapter). Ubuntu always hit exception when the adapter is not present. See my test scenarios below. Test #1: Boot Ubuntu with BELL-3 adapter === - The Ubuntu LPAR was running with the BELL-3 (2 port-Async EIA-232 adapter) before. So I assigned the BELL-3 adapter to Ubuntu LPAR profile and powered on the LPAR. => Ubuntu boot fine this time. Test #2: Boot Ubuntu with BELL-3 adapter removed from LPAR profile === - I powered down the Ubuntu partition and removed the BELL-3 adapter from LPAR profile then powered on the LPAR. => Ubuntu hit the exception. Elapsed time since release of system processors: 0 mins 9 secs error: no suitable video mode found. OF stdout device is: /vdevice/vty@3000 Preparing to boot Linux version 3.19.0-23-generic (buildd@denneed03) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #24~14.04.1-Ubuntu SMP Wed Jul 8 11:17:19 UTC 2015 (Ubuntu 3.19.0-23.24~14.04.1-generic 3.19.8-ckt2) Detected machine type: 0101 Max number of cores passed to firmware: 256 (NR_CPUS = 2048) Calling ibm,client-architecture-support... done command line: BOOT_IMAGE=/boot/vmlinux-3.19.0-23-generic root=UUID=768190e7-f633-4c63-a1e3-588d12dea265 ro quiet splash vt.handoff=7 memory layout at init: memory_limit : (16 MB aligned) alloc_bottom : 0b42 alloc_top: 1000 alloc_top_hi : 1000 rmo_top : 1000 ram_top : 1000 instantiating rtas at 0x0ecb... done prom_hold_cpus: skipped copying OF device tree... Building dt strings... Building dt structure... Device tree strings 0x0b43 -> 0x0b4316b1 Device tree struct 0x0b44 -> 0x0b47 Calling quiesce... returning from prom_init -> smp_release_cpus() spinning_secondaries = 15 <- smp_release_cpus() <- setup_system() [0.661510] /build/linux-lts-vivid-uV14Ja/linux-lts-vivid-3.19.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [0.672826] sd 0:0:1:0: [sda] Assuming drive cache: write through [4.658302] device-mapper: table: 252:0: multipath: error getting device [4.691990] device-mapper: table: 252:0: multipath: error getting device [4.934034] device-mapper: table: 252:0: multipath: error getting device [4.951977] device-mapper: table: 252:0: multipath: error getting device * Discovering and coalescing multipaths... [ OK ] Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd * Starting AppArmor profiles[ OK ] Loading the saved-state of the serial devices... [5.109665] Unable to handle kernel paging request for data at address 0xd803 [5.109677] Faulting instruction address: 0xc060fec4 [5.109685] Oops: Kernel access of bad area, sig: 11 [#1] [5.109691] SMP NR_CPUS=2048 NUMA pSeries [5.109699] Modules linked in: dm_round_robin dm_multipath scsi_dh pseries_rng rtc_generic knem(OE) nfsd auth_rpcgss nfs_acl nfs lockd grace sunrpc fscache rdma_ucm(OE) ib_ucm(OE) rdma_cm(OE) iw_cm(OE) configfs ib_ipoib(OE) ib_cm(OE) ib_uverbs(OE) ib_umad(OE) mlx5_ib(OE) mlx5_core(OE) mlx4_ib(OE) ib_sa(OE) ib_mad(OE) ib_core(OE) ib_addr(OE) mlx4_en(OE) mlx4_core(OE) mlx_compat(OE) [5.109759] CPU: 1 PID: 1816 Comm: setserial Tainted: G OE 3.19.0-23-generic #24~14.04.1-Ubuntu [5.109769] task: c000f389c880 ti: c000f0528000 task.ti: c000f0528000 [5.109777] NIP: c060fec4 LR: c0617498 CTR: c060fe20 [5.109785] REGS: c000f052b6b0 TRAP: 0300 Tainted: G OE (3.19.0-23-generic) [5.109793] MSR: 80009033CR: 84002022 XER: [5.109814] CFAR: c0008468 DAR: d803 DSISR: 4200 SOFTE: 1 GPR00: c0617498 c000f052b930 c144c700 00bf GPR04: d803 00bf c000f399 0141 GPR08: c0611d20 c13539e0 d800 c1351ba8
[Kernel-packages] [Bug 1491494] Comment bridged from LTC Bugzilla
--- Comment From amda...@us.ibm.com 2015-10-12 17:12 EDT--- Externalizing Comment from Paul Nguyen 2015-10-12 13:09:36 EDT (In reply to comment #16) > Paul Nguyen, please respond to Adam's questions especially since this was > opened as a blocker issue. The adapter is completely removed from Ubuntu LPAR and it has no serial ports left. But when Ubuntu LPAR booting up, OS incorrectly sending syscalls wildly without checking. Please see comments #4 and #6 from Luciano that has the analysis. I also ran tests and confirmed his analysis in comment #9. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1491494 Title: Ubuntu 14.04.03 LPAR hits kernel oops after serial adapter is removed from profile Status in linux package in Ubuntu: Triaged Bug description: -- Problem Description -- The failure related to the BELL-3 (2 port-Async EIA-232 adapter). Ubuntu always hit exception when the adapter is not present. See my test scenarios below. Test #1: Boot Ubuntu with BELL-3 adapter === - The Ubuntu LPAR was running with the BELL-3 (2 port-Async EIA-232 adapter) before. So I assigned the BELL-3 adapter to Ubuntu LPAR profile and powered on the LPAR. => Ubuntu boot fine this time. Test #2: Boot Ubuntu with BELL-3 adapter removed from LPAR profile === - I powered down the Ubuntu partition and removed the BELL-3 adapter from LPAR profile then powered on the LPAR. => Ubuntu hit the exception. Elapsed time since release of system processors: 0 mins 9 secs error: no suitable video mode found. OF stdout device is: /vdevice/vty@3000 Preparing to boot Linux version 3.19.0-23-generic (buildd@denneed03) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #24~14.04.1-Ubuntu SMP Wed Jul 8 11:17:19 UTC 2015 (Ubuntu 3.19.0-23.24~14.04.1-generic 3.19.8-ckt2) Detected machine type: 0101 Max number of cores passed to firmware: 256 (NR_CPUS = 2048) Calling ibm,client-architecture-support... done command line: BOOT_IMAGE=/boot/vmlinux-3.19.0-23-generic root=UUID=768190e7-f633-4c63-a1e3-588d12dea265 ro quiet splash vt.handoff=7 memory layout at init: memory_limit : (16 MB aligned) alloc_bottom : 0b42 alloc_top: 1000 alloc_top_hi : 1000 rmo_top : 1000 ram_top : 1000 instantiating rtas at 0x0ecb... done prom_hold_cpus: skipped copying OF device tree... Building dt strings... Building dt structure... Device tree strings 0x0b43 -> 0x0b4316b1 Device tree struct 0x0b44 -> 0x0b47 Calling quiesce... returning from prom_init -> smp_release_cpus() spinning_secondaries = 15 <- smp_release_cpus() <- setup_system() [0.661510] /build/linux-lts-vivid-uV14Ja/linux-lts-vivid-3.19.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [0.672826] sd 0:0:1:0: [sda] Assuming drive cache: write through [4.658302] device-mapper: table: 252:0: multipath: error getting device [4.691990] device-mapper: table: 252:0: multipath: error getting device [4.934034] device-mapper: table: 252:0: multipath: error getting device [4.951977] device-mapper: table: 252:0: multipath: error getting device * Discovering and coalescing multipaths... [ OK ] Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd * Starting AppArmor profiles[ OK ] Loading the saved-state of the serial devices... [5.109665] Unable to handle kernel paging request for data at address 0xd803 [5.109677] Faulting instruction address: 0xc060fec4 [5.109685] Oops: Kernel access of bad area, sig: 11 [#1] [5.109691] SMP NR_CPUS=2048 NUMA pSeries [5.109699] Modules linked in: dm_round_robin dm_multipath scsi_dh pseries_rng rtc_generic knem(OE) nfsd auth_rpcgss nfs_acl nfs lockd grace sunrpc fscache rdma_ucm(OE) ib_ucm(OE) rdma_cm(OE) iw_cm(OE) configfs ib_ipoib(OE) ib_cm(OE) ib_uverbs(OE) ib_umad(OE) mlx5_ib(OE) mlx5_core(OE) mlx4_ib(OE) ib_sa(OE) ib_mad(OE) ib_core(OE) ib_addr(OE) mlx4_en(OE) mlx4_core(OE) mlx_compat(OE) [5.109759] CPU: 1 PID: 1816 Comm: setserial Tainted: G OE 3.19.0-23-generic #24~14.04.1-Ubuntu [5.109769] task: c000f389c880 ti: c000f0528000 task.ti: c000f0528000 [5.109777] NIP: c060fec4 LR: c0617498 CTR: c060fe20 [5.109785] REGS: c000f052b6b0 TRAP: 0300 Tainted: G OE (3.19.0-23-generic) [5.109793] MSR: 80009033CR: 84002022 XER: [5.109814] CFAR: c0008468 DAR: d803 DSISR: 4200 SOFTE: 1 GPR00: c0617498 c000f052b930
[Kernel-packages] [Bug 1491494] Comment bridged from LTC Bugzilla
--- Comment From amda...@us.ibm.com 2015-10-12 16:50 EDT--- Paul Nguyen, please respond to Adam's questions especially since this was opened as a blocker issue. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1491494 Title: Ubuntu 14.04.03 LPAR hits kernel oops after serial adapter is removed from profile Status in linux package in Ubuntu: Triaged Bug description: -- Problem Description -- The failure related to the BELL-3 (2 port-Async EIA-232 adapter). Ubuntu always hit exception when the adapter is not present. See my test scenarios below. Test #1: Boot Ubuntu with BELL-3 adapter === - The Ubuntu LPAR was running with the BELL-3 (2 port-Async EIA-232 adapter) before. So I assigned the BELL-3 adapter to Ubuntu LPAR profile and powered on the LPAR. => Ubuntu boot fine this time. Test #2: Boot Ubuntu with BELL-3 adapter removed from LPAR profile === - I powered down the Ubuntu partition and removed the BELL-3 adapter from LPAR profile then powered on the LPAR. => Ubuntu hit the exception. Elapsed time since release of system processors: 0 mins 9 secs error: no suitable video mode found. OF stdout device is: /vdevice/vty@3000 Preparing to boot Linux version 3.19.0-23-generic (buildd@denneed03) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #24~14.04.1-Ubuntu SMP Wed Jul 8 11:17:19 UTC 2015 (Ubuntu 3.19.0-23.24~14.04.1-generic 3.19.8-ckt2) Detected machine type: 0101 Max number of cores passed to firmware: 256 (NR_CPUS = 2048) Calling ibm,client-architecture-support... done command line: BOOT_IMAGE=/boot/vmlinux-3.19.0-23-generic root=UUID=768190e7-f633-4c63-a1e3-588d12dea265 ro quiet splash vt.handoff=7 memory layout at init: memory_limit : (16 MB aligned) alloc_bottom : 0b42 alloc_top: 1000 alloc_top_hi : 1000 rmo_top : 1000 ram_top : 1000 instantiating rtas at 0x0ecb... done prom_hold_cpus: skipped copying OF device tree... Building dt strings... Building dt structure... Device tree strings 0x0b43 -> 0x0b4316b1 Device tree struct 0x0b44 -> 0x0b47 Calling quiesce... returning from prom_init -> smp_release_cpus() spinning_secondaries = 15 <- smp_release_cpus() <- setup_system() [0.661510] /build/linux-lts-vivid-uV14Ja/linux-lts-vivid-3.19.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [0.672826] sd 0:0:1:0: [sda] Assuming drive cache: write through [4.658302] device-mapper: table: 252:0: multipath: error getting device [4.691990] device-mapper: table: 252:0: multipath: error getting device [4.934034] device-mapper: table: 252:0: multipath: error getting device [4.951977] device-mapper: table: 252:0: multipath: error getting device * Discovering and coalescing multipaths... [ OK ] Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd * Starting AppArmor profiles[ OK ] Loading the saved-state of the serial devices... [5.109665] Unable to handle kernel paging request for data at address 0xd803 [5.109677] Faulting instruction address: 0xc060fec4 [5.109685] Oops: Kernel access of bad area, sig: 11 [#1] [5.109691] SMP NR_CPUS=2048 NUMA pSeries [5.109699] Modules linked in: dm_round_robin dm_multipath scsi_dh pseries_rng rtc_generic knem(OE) nfsd auth_rpcgss nfs_acl nfs lockd grace sunrpc fscache rdma_ucm(OE) ib_ucm(OE) rdma_cm(OE) iw_cm(OE) configfs ib_ipoib(OE) ib_cm(OE) ib_uverbs(OE) ib_umad(OE) mlx5_ib(OE) mlx5_core(OE) mlx4_ib(OE) ib_sa(OE) ib_mad(OE) ib_core(OE) ib_addr(OE) mlx4_en(OE) mlx4_core(OE) mlx_compat(OE) [5.109759] CPU: 1 PID: 1816 Comm: setserial Tainted: G OE 3.19.0-23-generic #24~14.04.1-Ubuntu [5.109769] task: c000f389c880 ti: c000f0528000 task.ti: c000f0528000 [5.109777] NIP: c060fec4 LR: c0617498 CTR: c060fe20 [5.109785] REGS: c000f052b6b0 TRAP: 0300 Tainted: G OE (3.19.0-23-generic) [5.109793] MSR: 80009033CR: 84002022 XER: [5.109814] CFAR: c0008468 DAR: d803 DSISR: 4200 SOFTE: 1 GPR00: c0617498 c000f052b930 c144c700 00bf GPR04: d803 00bf c000f399 0141 GPR08: c0611d20 c13539e0 d800 c1351ba8 GPR12: c060fe20 ce830900 GPR16: GPR20: 007d 0040
[Kernel-packages] [Bug 1491494] Comment bridged from LTC Bugzilla
--- Comment From cdead...@us.ibm.com 2015-10-04 15:15 EDT--- State: Assigned by: bellivea on 04 October 2015 10:07:01 Any updates? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1491494 Title: Ubuntu 14.04.03 LPAR hits kernel oops after serial adapter is removed from profile Status in linux package in Ubuntu: Triaged Bug description: -- Problem Description -- The failure related to the BELL-3 (2 port-Async EIA-232 adapter). Ubuntu always hit exception when the adapter is not present. See my test scenarios below. Test #1: Boot Ubuntu with BELL-3 adapter === - The Ubuntu LPAR was running with the BELL-3 (2 port-Async EIA-232 adapter) before. So I assigned the BELL-3 adapter to Ubuntu LPAR profile and powered on the LPAR. => Ubuntu boot fine this time. Test #2: Boot Ubuntu with BELL-3 adapter removed from LPAR profile === - I powered down the Ubuntu partition and removed the BELL-3 adapter from LPAR profile then powered on the LPAR. => Ubuntu hit the exception. Elapsed time since release of system processors: 0 mins 9 secs error: no suitable video mode found. OF stdout device is: /vdevice/vty@3000 Preparing to boot Linux version 3.19.0-23-generic (buildd@denneed03) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #24~14.04.1-Ubuntu SMP Wed Jul 8 11:17:19 UTC 2015 (Ubuntu 3.19.0-23.24~14.04.1-generic 3.19.8-ckt2) Detected machine type: 0101 Max number of cores passed to firmware: 256 (NR_CPUS = 2048) Calling ibm,client-architecture-support... done command line: BOOT_IMAGE=/boot/vmlinux-3.19.0-23-generic root=UUID=768190e7-f633-4c63-a1e3-588d12dea265 ro quiet splash vt.handoff=7 memory layout at init: memory_limit : (16 MB aligned) alloc_bottom : 0b42 alloc_top: 1000 alloc_top_hi : 1000 rmo_top : 1000 ram_top : 1000 instantiating rtas at 0x0ecb... done prom_hold_cpus: skipped copying OF device tree... Building dt strings... Building dt structure... Device tree strings 0x0b43 -> 0x0b4316b1 Device tree struct 0x0b44 -> 0x0b47 Calling quiesce... returning from prom_init -> smp_release_cpus() spinning_secondaries = 15 <- smp_release_cpus() <- setup_system() [0.661510] /build/linux-lts-vivid-uV14Ja/linux-lts-vivid-3.19.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [0.672826] sd 0:0:1:0: [sda] Assuming drive cache: write through [4.658302] device-mapper: table: 252:0: multipath: error getting device [4.691990] device-mapper: table: 252:0: multipath: error getting device [4.934034] device-mapper: table: 252:0: multipath: error getting device [4.951977] device-mapper: table: 252:0: multipath: error getting device * Discovering and coalescing multipaths... [ OK ] Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd * Starting AppArmor profiles[ OK ] Loading the saved-state of the serial devices... [5.109665] Unable to handle kernel paging request for data at address 0xd803 [5.109677] Faulting instruction address: 0xc060fec4 [5.109685] Oops: Kernel access of bad area, sig: 11 [#1] [5.109691] SMP NR_CPUS=2048 NUMA pSeries [5.109699] Modules linked in: dm_round_robin dm_multipath scsi_dh pseries_rng rtc_generic knem(OE) nfsd auth_rpcgss nfs_acl nfs lockd grace sunrpc fscache rdma_ucm(OE) ib_ucm(OE) rdma_cm(OE) iw_cm(OE) configfs ib_ipoib(OE) ib_cm(OE) ib_uverbs(OE) ib_umad(OE) mlx5_ib(OE) mlx5_core(OE) mlx4_ib(OE) ib_sa(OE) ib_mad(OE) ib_core(OE) ib_addr(OE) mlx4_en(OE) mlx4_core(OE) mlx_compat(OE) [5.109759] CPU: 1 PID: 1816 Comm: setserial Tainted: G OE 3.19.0-23-generic #24~14.04.1-Ubuntu [5.109769] task: c000f389c880 ti: c000f0528000 task.ti: c000f0528000 [5.109777] NIP: c060fec4 LR: c0617498 CTR: c060fe20 [5.109785] REGS: c000f052b6b0 TRAP: 0300 Tainted: G OE (3.19.0-23-generic) [5.109793] MSR: 80009033CR: 84002022 XER: [5.109814] CFAR: c0008468 DAR: d803 DSISR: 4200 SOFTE: 1 GPR00: c0617498 c000f052b930 c144c700 00bf GPR04: d803 00bf c000f399 0141 GPR08: c0611d20 c13539e0 d800 c1351ba8 GPR12: c060fe20 ce830900 GPR16: GPR20: 007d 0040