[Kernel-packages] [Bug 1711298] Re: Artful: 4.12.0-11.12: Boot panic in vlv2_plat_configure_clock+0x3b/0xa0
This bug was fixed in the package linux - 4.12.0-12.13 --- linux (4.12.0-12.13) artful; urgency=low * Artful update to v4.12.8 stable release (LP: #1711368) - mm: ratelimit PFNs busy info message - mm: fix list corruptions on shmem shrinklist - futex: Remove unnecessary warning from get_futex_key - xtensa: fix cache aliasing handling code for WT cache - xtensa: mm/cache: add missing EXPORT_SYMBOLs - xtensa: don't limit csum_partial export by CONFIG_NET - xfs: Fix leak of discard bio - pinctrl: armada-37xx: Fix number of pin in south bridge - mtd: nand: atmel: Fix DT backward compatibility in pmecc.c - mtd: nand: Fix timing setup for NANDs that do not support SET FEATURES - mtd: nand: Declare tBERS, tR and tPROG as u64 to avoid integer overflow - iscsi-target: fix memory leak in iscsit_setup_text_cmd() - iscsi-target: Fix iscsi_np reset hung task during parallel delete - usb-storage: fix deadlock involving host lock and scsi_done - target: Fix node_acl demo-mode + uncached dynamic shutdown regression - fuse: initialize the flock flag in fuse_file on allocation - i2c: designware: Some broken DSTDs use 1MiHz instead of 1MHz - nand: fix wrong default oob layout for small pages using soft ecc - mmc: mmc: correct the logic for setting HS400ES signal voltage - nfs/flexfiles: fix leak of nfs4_ff_ds_version arrays - drm/bridge: tc358767: fix probe without attached output node - drm/etnaviv: Fix off-by-one error in reloc checking - drm/i915: Fix out-of-bounds array access in bdw_load_gamma_lut - USB: serial: option: add D-Link DWM-222 device ID - USB: serial: cp210x: add support for Qivicon USB ZigBee dongle - USB: serial: pl2303: add new ATEN device id - usb: musb: fix tx fifo flush handling again - USB: hcd: Mark secondary HCD as dead if the primary one died - staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read - iio: aspeed-adc: wait for initial sequence. - iio: accel: st_accel: add SPI-3wire support - iio: accel: bmc150: Always restore device to normal mode after suspend- resume - iio: pressure: st_pressure_core: disable multiread by default for LPS22HB - iio: light: tsl2563: use correct event code - iio: adc: Revert "axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications" - staging: comedi: comedi_fops: do not call blocking ops when !TASK_RUNNING - uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069 - firmware: fix batched requests - wake all waiters - firmware: fix batched requests - send wake up on failure on direct lookups - firmware: avoid invalid fallback aborts by using killable wait - block: Make blk_mq_delay_kick_requeue_list() rerun the queue at a quiet time - usb: gadget: udc: renesas_usb3: Fix usb_gadget_giveback_request() calling - usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3 - USB: Check for dropped connection before switching to full speed - usb: core: unlink urbs from the tail of the endpoint's urb_list - usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter - usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume - PCI: Protect pci_error_handlers->reset_notify() usage with device_lock() - PCI: Remove __pci_dev_reset() and pci_dev_reset() - PCI: Add pci_reset_function_locked() - xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue - iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits - pnfs/blocklayout: require 64-bit sector_t - pinctrl: cherryview: Add Setzer models to the Chromebook DMI quirk - pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver - pinctrl: intel: merrifield: Correct UART pin lists - pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11 - pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20 - pinctrl: samsung: Remove bogus irq_[un]mask from resource management - pinctrl: meson-gxbb: Add missing GPIODV_18 pin entry - pinctrl: meson-gxl: Add missing GPIODV_18 pin entry - MIPS: DEC: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression - Revert "MIPS: Don't unnecessarily include kmalloc.h into ." - MIPS: Octeon: Fix broken EDAC driver. - Linux 4.12.8 * Artful: 4.12.0-11.12: Boot panic in vlv2_plat_configure_clock+0x3b/0xa0 (LP: #1711298) - [Config] CONFIG_INTEL_ATOMISP=n * ACPI ID for Hip07/08 I2C controller has typo (LP: #1711182) - ACPI: APD: Fix HID for Hisilicon Hip07/08 * Ubuntu17.10 - perf: Update Power9 PMU event JSON files (LP: #1708630) - perf pmu-events: Support additional POWER8+ PVR in mapfile - perf vendor events: Add POWER9 PMU events - perf vendor events: Add POWER9 PVRs to mapfile - SAUCE: perf vendor events powerpc: remove suffix in mapfile - SAUCE: perf vendor events powerpc: Update POWER9 events * Disable
[Kernel-packages] [Bug 1711298] Re: Artful: 4.12.0-11.12: Boot panic in vlv2_plat_configure_clock+0x3b/0xa0
This is a staging driver that can only be built into the kernel, and it's unconditionally registering a platform device for physical hw that may not be present. That is a bad behavior, so I've disabled this option until the driver is in better shape. ** Changed in: linux (Ubuntu) Importance: Undecided => High ** Changed in: linux (Ubuntu) Status: Confirmed => Fix Committed ** Changed in: linux (Ubuntu) Assignee: (unassigned) => Seth Forshee (sforshee) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1711298 Title: Artful: 4.12.0-11.12: Boot panic in vlv2_plat_configure_clock+0x3b/0xa0 Status in linux package in Ubuntu: Fix Committed Bug description: Environment: Xen PV guest (64bit) The 4.11.0-10 kernel did still boot. But after upgrading to the 4.12.0-11 kernel the following panic is observed: [1.262361] device-mapper: uevent: version 1.0.3 [1.262465] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-de...@redhat.com [1.262581] ledtrig-cpu: registered to indicate activity on CPUs [1.262696] BUG: unable to handle kernel paging request at c90040635060 [1.262719] IP: vlv2_plat_configure_clock+0x3b/0xa0 [1.262731] PGD ff805067 [1.262732] P4D ff805067 [1.262742] PUD fa93c067 [1.262752] PMD fa352067 [1.262761] PTE 0 [1.262771] [1.262790] Oops: [#1] SMP [1.262801] Modules linked in: [1.262814] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.12.0-11-generic #12-Ubuntu [1.262825] task: 8800fa39aa80 task.stack: c90040628000 [1.262833] RIP: e030:vlv2_plat_configure_clock+0x3b/0xa0 [1.262840] RSP: e02b:c9004062bb58 EFLAGS: 00010246 [1.262847] RAX: RBX: c90040635060 RCX: 02523fff [1.262855] RDX: 8800fa39aa80 RSI: 0002 RDI: 81ff7340 [1.262862] RBP: c9004062bb68 R08: 0067 R09: fff13000 [1.262870] R10: 7ff0 R11: 3000 R12: 0002 [1.262877] R13: R14: R15: [1.262890] FS: () GS:8800fac8() knlGS: [1.262902] CS: e033 DS: ES: CR0: 80050033 [1.262908] CR2: c90040635060 CR3: 01e09000 CR4: 0660 [1.262917] Call Trace: [1.262926] vlv2_plat_clk_probe+0x3f/0x70 [1.262936] platform_drv_probe+0x3b/0xa0 [1.262944] driver_probe_device+0x2ff/0x450 [1.262952] __device_attach_driver+0x83/0x100 [1.262959] ? __driver_attach+0xe0/0xe0 [1.262967] bus_for_each_drv+0x69/0xb0 [1.262974] __device_attach+0xdd/0x160 [1.262982] device_initial_probe+0x13/0x20 [1.262989] bus_probe_device+0x92/0xa0 [1.262997] device_add+0x451/0x690 [1.263003] platform_device_add+0x10d/0x270 [1.263012] ? set_debug_rodata+0x17/0x17 [1.263019] platform_device_register_full+0xfe/0x110 [1.263029] ? vlv2_plat_clk_init+0x19/0x19 [1.263036] vlv2_plat_clk_init+0x48/0x82 [1.263044] do_one_initcall+0x50/0x1a0 [1.263052] kernel_init_freeable+0x1bd/0x25f [1.263060] ? rest_init+0x80/0x80 [1.263067] kernel_init+0xe/0x100 [1.263074] ret_from_fork+0x25/0x30 [1.263081] Code: 47 83 fe 02 41 89 f4 77 67 48 8b 05 00 1b d9 00 48 85 c0 74 48 c1 e7 02 48 63 ff 48 8d 1c 38 48 c7 c7 40 73 ff 81 e8 35 b5 16 00 <8b> 03 83 e0 fc 44 09 e0 89 03 48 c7 c7 40 73 ff 81 e8 5f af 16 [1.263138] RIP: vlv2_plat_configure_clock+0x3b/0xa0 RSP: c9004062bb58 [1.263145] CR2: c90040635060 [1.263157] ---[ end trace e3dd450c61676c8a ]--- [1.263177] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0009 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711298/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1711298] Re: Artful: 4.12.0-11.12: Boot panic in vlv2_plat_configure_clock+0x3b/0xa0
Crash is caused by parts of a staging driver which is supposed to enable Intel MIPI Cameras: CONFIG_INTEL_ATOMISP -> drivers/staging/media/atomisp/clock This is a new driver introduced in 4.12. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1711298 Title: Artful: 4.12.0-11.12: Boot panic in vlv2_plat_configure_clock+0x3b/0xa0 Status in linux package in Ubuntu: Confirmed Bug description: Environment: Xen PV guest (64bit) The 4.11.0-10 kernel did still boot. But after upgrading to the 4.12.0-11 kernel the following panic is observed: [1.262361] device-mapper: uevent: version 1.0.3 [1.262465] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-de...@redhat.com [1.262581] ledtrig-cpu: registered to indicate activity on CPUs [1.262696] BUG: unable to handle kernel paging request at c90040635060 [1.262719] IP: vlv2_plat_configure_clock+0x3b/0xa0 [1.262731] PGD ff805067 [1.262732] P4D ff805067 [1.262742] PUD fa93c067 [1.262752] PMD fa352067 [1.262761] PTE 0 [1.262771] [1.262790] Oops: [#1] SMP [1.262801] Modules linked in: [1.262814] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.12.0-11-generic #12-Ubuntu [1.262825] task: 8800fa39aa80 task.stack: c90040628000 [1.262833] RIP: e030:vlv2_plat_configure_clock+0x3b/0xa0 [1.262840] RSP: e02b:c9004062bb58 EFLAGS: 00010246 [1.262847] RAX: RBX: c90040635060 RCX: 02523fff [1.262855] RDX: 8800fa39aa80 RSI: 0002 RDI: 81ff7340 [1.262862] RBP: c9004062bb68 R08: 0067 R09: fff13000 [1.262870] R10: 7ff0 R11: 3000 R12: 0002 [1.262877] R13: R14: R15: [1.262890] FS: () GS:8800fac8() knlGS: [1.262902] CS: e033 DS: ES: CR0: 80050033 [1.262908] CR2: c90040635060 CR3: 01e09000 CR4: 0660 [1.262917] Call Trace: [1.262926] vlv2_plat_clk_probe+0x3f/0x70 [1.262936] platform_drv_probe+0x3b/0xa0 [1.262944] driver_probe_device+0x2ff/0x450 [1.262952] __device_attach_driver+0x83/0x100 [1.262959] ? __driver_attach+0xe0/0xe0 [1.262967] bus_for_each_drv+0x69/0xb0 [1.262974] __device_attach+0xdd/0x160 [1.262982] device_initial_probe+0x13/0x20 [1.262989] bus_probe_device+0x92/0xa0 [1.262997] device_add+0x451/0x690 [1.263003] platform_device_add+0x10d/0x270 [1.263012] ? set_debug_rodata+0x17/0x17 [1.263019] platform_device_register_full+0xfe/0x110 [1.263029] ? vlv2_plat_clk_init+0x19/0x19 [1.263036] vlv2_plat_clk_init+0x48/0x82 [1.263044] do_one_initcall+0x50/0x1a0 [1.263052] kernel_init_freeable+0x1bd/0x25f [1.263060] ? rest_init+0x80/0x80 [1.263067] kernel_init+0xe/0x100 [1.263074] ret_from_fork+0x25/0x30 [1.263081] Code: 47 83 fe 02 41 89 f4 77 67 48 8b 05 00 1b d9 00 48 85 c0 74 48 c1 e7 02 48 63 ff 48 8d 1c 38 48 c7 c7 40 73 ff 81 e8 35 b5 16 00 <8b> 03 83 e0 fc 44 09 e0 89 03 48 c7 c7 40 73 ff 81 e8 5f af 16 [1.263138] RIP: vlv2_plat_configure_clock+0x3b/0xa0 RSP: c9004062bb58 [1.263145] CR2: c90040635060 [1.263157] ---[ end trace e3dd450c61676c8a ]--- [1.263177] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0009 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711298/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1711298] Re: Artful: 4.12.0-11.12: Boot panic in vlv2_plat_configure_clock+0x3b/0xa0
CONFIG_INTEL_ATOMISP -> drivers/staging/media/atomisp/platform/clock is the correct path. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1711298 Title: Artful: 4.12.0-11.12: Boot panic in vlv2_plat_configure_clock+0x3b/0xa0 Status in linux package in Ubuntu: Confirmed Bug description: Environment: Xen PV guest (64bit) The 4.11.0-10 kernel did still boot. But after upgrading to the 4.12.0-11 kernel the following panic is observed: [1.262361] device-mapper: uevent: version 1.0.3 [1.262465] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-de...@redhat.com [1.262581] ledtrig-cpu: registered to indicate activity on CPUs [1.262696] BUG: unable to handle kernel paging request at c90040635060 [1.262719] IP: vlv2_plat_configure_clock+0x3b/0xa0 [1.262731] PGD ff805067 [1.262732] P4D ff805067 [1.262742] PUD fa93c067 [1.262752] PMD fa352067 [1.262761] PTE 0 [1.262771] [1.262790] Oops: [#1] SMP [1.262801] Modules linked in: [1.262814] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.12.0-11-generic #12-Ubuntu [1.262825] task: 8800fa39aa80 task.stack: c90040628000 [1.262833] RIP: e030:vlv2_plat_configure_clock+0x3b/0xa0 [1.262840] RSP: e02b:c9004062bb58 EFLAGS: 00010246 [1.262847] RAX: RBX: c90040635060 RCX: 02523fff [1.262855] RDX: 8800fa39aa80 RSI: 0002 RDI: 81ff7340 [1.262862] RBP: c9004062bb68 R08: 0067 R09: fff13000 [1.262870] R10: 7ff0 R11: 3000 R12: 0002 [1.262877] R13: R14: R15: [1.262890] FS: () GS:8800fac8() knlGS: [1.262902] CS: e033 DS: ES: CR0: 80050033 [1.262908] CR2: c90040635060 CR3: 01e09000 CR4: 0660 [1.262917] Call Trace: [1.262926] vlv2_plat_clk_probe+0x3f/0x70 [1.262936] platform_drv_probe+0x3b/0xa0 [1.262944] driver_probe_device+0x2ff/0x450 [1.262952] __device_attach_driver+0x83/0x100 [1.262959] ? __driver_attach+0xe0/0xe0 [1.262967] bus_for_each_drv+0x69/0xb0 [1.262974] __device_attach+0xdd/0x160 [1.262982] device_initial_probe+0x13/0x20 [1.262989] bus_probe_device+0x92/0xa0 [1.262997] device_add+0x451/0x690 [1.263003] platform_device_add+0x10d/0x270 [1.263012] ? set_debug_rodata+0x17/0x17 [1.263019] platform_device_register_full+0xfe/0x110 [1.263029] ? vlv2_plat_clk_init+0x19/0x19 [1.263036] vlv2_plat_clk_init+0x48/0x82 [1.263044] do_one_initcall+0x50/0x1a0 [1.263052] kernel_init_freeable+0x1bd/0x25f [1.263060] ? rest_init+0x80/0x80 [1.263067] kernel_init+0xe/0x100 [1.263074] ret_from_fork+0x25/0x30 [1.263081] Code: 47 83 fe 02 41 89 f4 77 67 48 8b 05 00 1b d9 00 48 85 c0 74 48 c1 e7 02 48 63 ff 48 8d 1c 38 48 c7 c7 40 73 ff 81 e8 35 b5 16 00 <8b> 03 83 e0 fc 44 09 e0 89 03 48 c7 c7 40 73 ff 81 e8 5f af 16 [1.263138] RIP: vlv2_plat_configure_clock+0x3b/0xa0 RSP: c9004062bb58 [1.263145] CR2: c90040635060 [1.263157] ---[ end trace e3dd450c61676c8a ]--- [1.263177] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0009 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711298/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1711298] Re: Artful: 4.12.0-11.12: Boot panic in vlv2_plat_configure_clock+0x3b/0xa0
Still the same crash using a 4.13 kernel: [1.251126] BUG: unable to handle kernel paging request at c90040635060 [1.251144] IP: vlv2_plat_configure_clock+0x3b/0xa0 [1.251152] PGD ff805067 [1.251153] P4D ff805067 [1.251159] PUD fa93e067 [1.251166] PMD fa354067 [1.251172] PTE 0 [1.251178] [1.251189] Oops: [#1] SMP [1.251198] Modules linked in: [1.251208] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-5-generic #6-Ubuntu [1.251220] task: 8800fa39ac00 task.stack: c90040628000 [1.251230] RIP: e030:vlv2_plat_configure_clock+0x3b/0xa0 [1.251239] RSP: e02b:c9004062bb58 EFLAGS: 00010246 [1.251248] RAX: RBX: c90040635060 RCX: 02523fff [1.251256] RDX: 8800fa39ac00 RSI: 0002 RDI: 81fe7dc0 [1.251265] RBP: c9004062bb68 R08: 0067 R09: fff13000 [1.251273] R10: 7ff0 R11: 3000 R12: 0002 [1.251282] R13: R14: R15: [1.251295] FS: () GS:8800fac0() knlGS: [1.251307] CS: e033 DS: ES: CR0: 80050033 [1.251315] CR2: c90040635060 CR3: 01e09000 CR4: 0660 [1.251324] Call Trace: [1.251334] vlv2_plat_clk_probe+0x3f/0x70 [1.251345] platform_drv_probe+0x3b/0xa0 [1.251353] driver_probe_device+0x2ff/0x450 [1.251362] __device_attach_driver+0x83/0x100 [1.251371] ? __driver_attach+0xe0/0xe0 [1.251379] bus_for_each_drv+0x69/0xb0 [1.251387] __device_attach+0xdd/0x160 [1.251395] device_initial_probe+0x13/0x20 [1.251403] bus_probe_device+0x92/0xa0 [1.251411] device_add+0x448/0x680 [1.251420] platform_device_add+0x10d/0x270 [1.251430] ? set_debug_rodata+0x17/0x17 [1.251437] platform_device_register_full+0xfe/0x110 [1.251447] ? vlv2_plat_clk_init+0x19/0x19 [1.251456] vlv2_plat_clk_init+0x48/0x82 [1.251465] do_one_initcall+0x50/0x1a0 [1.251474] kernel_init_freeable+0x1ae/0x250 [1.251483] ? rest_init+0xc0/0xc0 [1.251491] kernel_init+0xe/0xfc [1.251499] ret_from_fork+0x25/0x30 [1.251506] Code: 47 83 fe 02 41 89 f4 77 67 48 8b 05 f8 ea d8 00 48 85 c0 74 48 c1 e7 02 48 63 ff 48 8d 1c 38 48 c7 c7 c0 7d fe 81 e8 85 f4 17 00 <8b> 03 83 e0 fc 44 09 e0 89 03 48 c7 c7 c0 7d fe 81 e8 af ee 17 [1.251565] RIP: vlv2_plat_configure_clock+0x3b/0xa0 RSP: c9004062bb58 [1.251573] CR2: c90040635060 [1.251586] ---[ end trace 0b77e5f33603697e ]--- -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1711298 Title: Artful: 4.12.0-11.12: Boot panic in vlv2_plat_configure_clock+0x3b/0xa0 Status in linux package in Ubuntu: Confirmed Bug description: Environment: Xen PV guest (64bit) The 4.11.0-10 kernel did still boot. But after upgrading to the 4.12.0-11 kernel the following panic is observed: [1.262361] device-mapper: uevent: version 1.0.3 [1.262465] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-de...@redhat.com [1.262581] ledtrig-cpu: registered to indicate activity on CPUs [1.262696] BUG: unable to handle kernel paging request at c90040635060 [1.262719] IP: vlv2_plat_configure_clock+0x3b/0xa0 [1.262731] PGD ff805067 [1.262732] P4D ff805067 [1.262742] PUD fa93c067 [1.262752] PMD fa352067 [1.262761] PTE 0 [1.262771] [1.262790] Oops: [#1] SMP [1.262801] Modules linked in: [1.262814] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.12.0-11-generic #12-Ubuntu [1.262825] task: 8800fa39aa80 task.stack: c90040628000 [1.262833] RIP: e030:vlv2_plat_configure_clock+0x3b/0xa0 [1.262840] RSP: e02b:c9004062bb58 EFLAGS: 00010246 [1.262847] RAX: RBX: c90040635060 RCX: 02523fff [1.262855] RDX: 8800fa39aa80 RSI: 0002 RDI: 81ff7340 [1.262862] RBP: c9004062bb68 R08: 0067 R09: fff13000 [1.262870] R10: 7ff0 R11: 3000 R12: 0002 [1.262877] R13: R14: R15: [1.262890] FS: () GS:8800fac8() knlGS: [1.262902] CS: e033 DS: ES: CR0: 80050033 [1.262908] CR2: c90040635060 CR3: 01e09000 CR4: 0660 [1.262917] Call Trace: [1.262926] vlv2_plat_clk_probe+0x3f/0x70 [1.262936] platform_drv_probe+0x3b/0xa0 [1.262944] driver_probe_device+0x2ff/0x450 [1.262952] __device_attach_driver+0x83/0x100 [1.262959] ? __driver_attach+0xe0/0xe0 [1.262967] bus_for_each_drv+0x69/0xb0 [1.262974]
[Kernel-packages] [Bug 1711298] Re: Artful: 4.12.0-11.12: Boot panic in vlv2_plat_configure_clock+0x3b/0xa0
Modifying the boot config to boot the previous kernel allows to boot again. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1711298 Title: Artful: 4.12.0-11.12: Boot panic in vlv2_plat_configure_clock+0x3b/0xa0 Status in linux package in Ubuntu: Confirmed Bug description: Environment: Xen PV guest (64bit) The 4.11.0-10 kernel did still boot. But after upgrading to the 4.12.0-11 kernel the following panic is observed: [1.262361] device-mapper: uevent: version 1.0.3 [1.262465] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-de...@redhat.com [1.262581] ledtrig-cpu: registered to indicate activity on CPUs [1.262696] BUG: unable to handle kernel paging request at c90040635060 [1.262719] IP: vlv2_plat_configure_clock+0x3b/0xa0 [1.262731] PGD ff805067 [1.262732] P4D ff805067 [1.262742] PUD fa93c067 [1.262752] PMD fa352067 [1.262761] PTE 0 [1.262771] [1.262790] Oops: [#1] SMP [1.262801] Modules linked in: [1.262814] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.12.0-11-generic #12-Ubuntu [1.262825] task: 8800fa39aa80 task.stack: c90040628000 [1.262833] RIP: e030:vlv2_plat_configure_clock+0x3b/0xa0 [1.262840] RSP: e02b:c9004062bb58 EFLAGS: 00010246 [1.262847] RAX: RBX: c90040635060 RCX: 02523fff [1.262855] RDX: 8800fa39aa80 RSI: 0002 RDI: 81ff7340 [1.262862] RBP: c9004062bb68 R08: 0067 R09: fff13000 [1.262870] R10: 7ff0 R11: 3000 R12: 0002 [1.262877] R13: R14: R15: [1.262890] FS: () GS:8800fac8() knlGS: [1.262902] CS: e033 DS: ES: CR0: 80050033 [1.262908] CR2: c90040635060 CR3: 01e09000 CR4: 0660 [1.262917] Call Trace: [1.262926] vlv2_plat_clk_probe+0x3f/0x70 [1.262936] platform_drv_probe+0x3b/0xa0 [1.262944] driver_probe_device+0x2ff/0x450 [1.262952] __device_attach_driver+0x83/0x100 [1.262959] ? __driver_attach+0xe0/0xe0 [1.262967] bus_for_each_drv+0x69/0xb0 [1.262974] __device_attach+0xdd/0x160 [1.262982] device_initial_probe+0x13/0x20 [1.262989] bus_probe_device+0x92/0xa0 [1.262997] device_add+0x451/0x690 [1.263003] platform_device_add+0x10d/0x270 [1.263012] ? set_debug_rodata+0x17/0x17 [1.263019] platform_device_register_full+0xfe/0x110 [1.263029] ? vlv2_plat_clk_init+0x19/0x19 [1.263036] vlv2_plat_clk_init+0x48/0x82 [1.263044] do_one_initcall+0x50/0x1a0 [1.263052] kernel_init_freeable+0x1bd/0x25f [1.263060] ? rest_init+0x80/0x80 [1.263067] kernel_init+0xe/0x100 [1.263074] ret_from_fork+0x25/0x30 [1.263081] Code: 47 83 fe 02 41 89 f4 77 67 48 8b 05 00 1b d9 00 48 85 c0 74 48 c1 e7 02 48 63 ff 48 8d 1c 38 48 c7 c7 40 73 ff 81 e8 35 b5 16 00 <8b> 03 83 e0 fc 44 09 e0 89 03 48 c7 c7 40 73 ff 81 e8 5f af 16 [1.263138] RIP: vlv2_plat_configure_clock+0x3b/0xa0 RSP: c9004062bb58 [1.263145] CR2: c90040635060 [1.263157] ---[ end trace e3dd450c61676c8a ]--- [1.263177] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0009 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711298/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp