[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
** Changed in: linux-oem-osp1 (Ubuntu) Status: New => Invalid ** Changed in: linux-oem (Ubuntu) Status: New => Invalid ** Changed in: hwe-next Status: New => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1847063 Title: Fix non-working Realtek USB ethernet after system resume Status in HWE Next: Fix Released Status in linux package in Ubuntu: Fix Released Status in linux-oem package in Ubuntu: Invalid Status in linux-oem-osp1 package in Ubuntu: Invalid Status in linux source package in Bionic: Fix Released Status in linux-oem source package in Bionic: Fix Released Status in linux-oem-osp1 source package in Bionic: Fix Released Status in linux source package in Disco: Fix Released Status in linux-oem source package in Disco: Fix Released Status in linux-oem-osp1 source package in Disco: Fix Released Status in linux source package in Eoan: Fix Released Status in linux-oem source package in Eoan: Fix Released Status in linux-oem-osp1 source package in Eoan: Fix Released Bug description: [Impact] If mac passthrough is enbled, Realtek USB ethernet (r8152) doesn't work under the following steps: 1. Connect to a Dell dock 2. Suspend the system 3. Re-plug the dock 4. Resume the system 5. Ethernet stops working [Fix] The USB port lose its power when the dock gets replugged, so we need to re-write the MAC address at reset_resume callback. [Test] The fix is succesfully tested on Dell WD15 dock and TB16 dock. [Regression Potential] Low. The fix limits to one single device and only take affect when MAC passthrough is enabled. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1847063/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
This bug was fixed in the package linux - 5.3.0-24.26 --- linux (5.3.0-24.26) eoan; urgency=medium * eoan/linux: 5.3.0-24.26 -proposed tracker (LP: #1852232) * Eoan update: 5.3.9 upstream stable release (LP: #1851550) - io_uring: fix up O_NONBLOCK handling for sockets - dm snapshot: introduce account_start_copy() and account_end_copy() - dm snapshot: rework COW throttling to fix deadlock - Btrfs: fix inode cache block reserve leak on failure to allocate data space - btrfs: qgroup: Always free PREALLOC META reserve in btrfs_delalloc_release_extents() - iio: adc: meson_saradc: Fix memory allocation order - iio: fix center temperature of bmc150-accel-core - libsubcmd: Make _FORTIFY_SOURCE defines dependent on the feature - perf tests: Avoid raising SEGV using an obvious NULL dereference - perf map: Fix overlapped map handling - perf script brstackinsn: Fix recovery from LBR/binary mismatch - perf jevents: Fix period for Intel fixed counters - perf tools: Propagate get_cpuid() error - perf annotate: Propagate perf_env__arch() error - perf annotate: Fix the signedness of failure returns - perf annotate: Propagate the symbol__annotate() error return - perf annotate: Fix arch specific ->init() failure errors - perf annotate: Return appropriate error code for allocation failures - perf annotate: Don't return -1 for error when doing BPF disassembly - staging: rtl8188eu: fix null dereference when kzalloc fails - RDMA/siw: Fix serialization issue in write_space() - RDMA/hfi1: Prevent memory leak in sdma_init - RDMA/iw_cxgb4: fix SRQ access from dump_qp() - RDMA/iwcm: Fix a lock inversion issue - HID: hyperv: Use in-place iterator API in the channel callback - kselftest: exclude failed TARGETS from runlist - selftests/kselftest/runner.sh: Add 45 second timeout per test - nfs: Fix nfsi->nrequests count error on nfs_inode_remove_request - arm64: cpufeature: Effectively expose FRINT capability to userspace - arm64: Fix incorrect irqflag restore for priority masking for compat - arm64: ftrace: Ensure synchronisation in PLT setup for Neoverse-N1 #1542419 - tty: serial: owl: Fix the link time qualifier of 'owl_uart_exit()' - tty: serial: rda: Fix the link time qualifier of 'rda_uart_exit()' - serial/sifive: select SERIAL_EARLYCON - tty: n_hdlc: fix build on SPARC - misc: fastrpc: prevent memory leak in fastrpc_dma_buf_attach - RDMA/core: Fix an error handling path in 'res_get_common_doit()' - RDMA/cm: Fix memory leak in cm_add/remove_one - RDMA/nldev: Reshuffle the code to avoid need to rebind QP in error path - RDMA/mlx5: Do not allow rereg of a ODP MR - RDMA/mlx5: Order num_pending_prefetch properly with synchronize_srcu - RDMA/mlx5: Add missing synchronize_srcu() for MW cases - gpio: max77620: Use correct unit for debounce times - fs: cifs: mute -Wunused-const-variable message - arm64: vdso32: Fix broken compat vDSO build warnings - arm64: vdso32: Detect binutils support for dmb ishld - serial: mctrl_gpio: Check for NULL pointer - serial: 8250_omap: Fix gpio check for auto RTS/CTS - arm64: Default to building compat vDSO with clang when CONFIG_CC_IS_CLANG - arm64: vdso32: Don't use KBUILD_CPPFLAGS unconditionally - efi/cper: Fix endianness of PCIe class code - efi/x86: Do not clean dummy variable in kexec path - MIPS: include: Mark __cmpxchg as __always_inline - riscv: avoid kernel hangs when trapped in BUG() - riscv: avoid sending a SIGTRAP to a user thread trapped in WARN() - riscv: Correct the handling of unexpected ebreak in do_trap_break() - x86/xen: Return from panic notifier - ocfs2: clear zero in unaligned direct IO - fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry() - fs: ocfs2: fix a possible null-pointer dereference in ocfs2_write_end_nolock() - fs: ocfs2: fix a possible null-pointer dereference in ocfs2_info_scan_inode_alloc() - btrfs: silence maybe-uninitialized warning in clone_range - arm64: armv8_deprecated: Checking return value for memory allocation - sched/fair: Scale bandwidth quota and period without losing quota/period ratio precision - sched/vtime: Fix guest/system mis-accounting on task switch - perf/core: Rework memory accounting in perf_mmap() - perf/core: Fix corner case in perf_rotate_context() - perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp - drm/amdgpu: fix memory leak - iio: imu: adis16400: release allocated memory on failure - iio: imu: adis16400: fix memory leak - iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller - MIPS: include: Mark __xchg as __always_inline - MIPS: fw: sni: Fix out of bounds init of o32 stack - s390/cio: fix virtio-ccw DMA without PV - virt: vbox: fix memory
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
This bug was fixed in the package linux - 5.3.0-22.24 --- linux (5.3.0-22.24) eoan; urgency=medium * [REGRESSION] md/raid0: cannot assemble multi-zone RAID0 with default_layout setting (LP: #1849682) - Revert "md/raid0: avoid RAID0 data corruption due to layout confusion." * refcount underflow and type confusion in shiftfs (LP: #1850867) // CVE-2019-15793 - SAUCE: shiftfs: Correct id translation for lower fs operations - SAUCE: shiftfs: prevent type confusion - SAUCE: shiftfs: Fix refcount underflow in btrfs ioctl handling * CVE-2018-12207 - kvm: x86, powerpc: do not allow clearing largepages debugfs entry - SAUCE: KVM: vmx, svm: always run with EFER.NXE=1 when shadow paging is active - SAUCE: x86: Add ITLB_MULTIHIT bug infrastructure - SAUCE: kvm: mmu: ITLB_MULTIHIT mitigation - SAUCE: kvm: Add helper function for creating VM worker threads - SAUCE: kvm: x86: mmu: Recovery of shattered NX large pages - SAUCE: cpu/speculation: Uninline and export CPU mitigations helpers - SAUCE: kvm: x86: mmu: Apply global mitigations knob to ITLB_MULTIHIT * CVE-2019-11135 - x86/msr: Add the IA32_TSX_CTRL MSR - x86/cpu: Add a helper function x86_read_arch_cap_msr() - x86/cpu: Add a "tsx=" cmdline option with TSX disabled by default - x86/speculation/taa: Add mitigation for TSX Async Abort - x86/speculation/taa: Add sysfs reporting for TSX Async Abort - kvm/x86: Export MDS_NO=0 to guests when TSX is enabled - x86/tsx: Add "auto" option to the tsx= cmdline parameter - x86/speculation/taa: Add documentation for TSX Async Abort - x86/tsx: Add config options to set tsx=on|off|auto - [Config] Disable TSX by default when possible * CVE-2019-0154 - SAUCE: drm/i915: Lower RM timeout to avoid DSI hard hangs - SAUCE: drm/i915/gen8+: Add RC6 CTX corruption WA * CVE-2019-0155 - SAUCE: drm/i915: Rename gen7 cmdparser tables - SAUCE: drm/i915: Disable Secure Batches for gen6+ - SAUCE: drm/i915: Remove Master tables from cmdparser - SAUCE: drm/i915: Add support for mandatory cmdparsing - SAUCE: drm/i915: Support ro ppgtt mapped cmdparser shadow buffers - SAUCE: drm/i915: Allow parsing of unsized batches - SAUCE: drm/i915: Add gen9 BCS cmdparsing - SAUCE: drm/i915/cmdparser: Use explicit goto for error paths - SAUCE: drm/i915/cmdparser: Add support for backward jumps - SAUCE: drm/i915/cmdparser: Ignore Length operands during command matching linux (5.3.0-21.22) eoan; urgency=medium * eoan/linux: 5.3.0-21.22 -proposed tracker (LP: #1850486) * Fix signing of staging modules in eoan (LP: #1850234) - [Packaging] Leave unsigned modules unsigned after adding .gnu_debuglink linux (5.3.0-20.21) eoan; urgency=medium * eoan/linux: 5.3.0-20.21 -proposed tracker (LP: #1849064) * eoan: alsa/sof: Enable SOF_HDA link and codec (LP: #1848490) - [Config] Enable SOF_HDA link and codec * Eoan update: 5.3.7 upstream stable release (LP: #1848750) - panic: ensure preemption is disabled during panic() - [Config] updateconfigs for USB_RIO500 - USB: rio500: Remove Rio 500 kernel driver - USB: yurex: Don't retry on unexpected errors - USB: yurex: fix NULL-derefs on disconnect - USB: usb-skeleton: fix runtime PM after driver unbind - USB: usb-skeleton: fix NULL-deref on disconnect - xhci: Fix false warning message about wrong bounce buffer write length - xhci: Prevent device initiated U1/U2 link pm if exit latency is too long - xhci: Check all endpoints for LPM timeout - xhci: Fix USB 3.1 capability detection on early xHCI 1.1 spec based hosts - usb: xhci: wait for CNR controller not ready bit in xhci resume - xhci: Prevent deadlock when xhci adapter breaks during init - xhci: Fix NULL pointer dereference in xhci_clear_tt_buffer_complete() - USB: adutux: fix use-after-free on disconnect - USB: adutux: fix NULL-derefs on disconnect - USB: adutux: fix use-after-free on release - USB: iowarrior: fix use-after-free on disconnect - USB: iowarrior: fix use-after-free on release - USB: iowarrior: fix use-after-free after driver unbind - USB: usblp: fix runtime PM after driver unbind - USB: chaoskey: fix use-after-free on release - USB: ldusb: fix NULL-derefs on driver unbind - serial: uartlite: fix exit path null pointer - serial: uartps: Fix uartps_major handling - USB: serial: keyspan: fix NULL-derefs on open() and write() - USB: serial: ftdi_sio: add device IDs for Sienna and Echelon PL-20 - USB: serial: option: add Telit FN980 compositions - USB: serial: option: add support for Cinterion CLS8 devices - USB: serial: fix runtime PM after driver unbind - USB: usblcd: fix I/O after disconnect - USB: microtek: fix info-leak at probe - USB: dummy-hcd: fix power budget for SuperSpeed mode - usb: renesas_usbhs: gadget: Do not discard queues
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
This bug was fixed in the package linux - 5.0.0-35.38 --- linux (5.0.0-35.38) disco; urgency=medium * [REGRESSION] md/raid0: cannot assemble multi-zone RAID0 with default_layout setting (LP: #1849682) - SAUCE: Fix revert "md/raid0: avoid RAID0 data corruption due to layout confusion." * refcount underflow and type confusion in shiftfs (LP: #1850867) // CVE-2019-15793 - SAUCE: shiftfs: Correct id translation for lower fs operations - SAUCE: shiftfs: prevent type confusion - SAUCE: shiftfs: Fix refcount underflow in btrfs ioctl handling * CVE-2018-12207 - kvm: Convert kvm_lock to a mutex - kvm: x86: Do not release the page inside mmu_set_spte() - KVM: x86: make FNAME(fetch) and __direct_map more similar - KVM: x86: remove now unneeded hugepage gfn adjustment - KVM: x86: change kvm_mmu_page_get_gfn BUG_ON to WARN_ON - KVM: x86: add tracepoints around __direct_map and FNAME(fetch) - kvm: x86, powerpc: do not allow clearing largepages debugfs entry - SAUCE: KVM: vmx, svm: always run with EFER.NXE=1 when shadow paging is active - SAUCE: x86: Add ITLB_MULTIHIT bug infrastructure - SAUCE: kvm: mmu: ITLB_MULTIHIT mitigation - SAUCE: kvm: Add helper function for creating VM worker threads - SAUCE: kvm: x86: mmu: Recovery of shattered NX large pages - SAUCE: cpu/speculation: Uninline and export CPU mitigations helpers - SAUCE: kvm: x86: mmu: Apply global mitigations knob to ITLB_MULTIHIT * CVE-2019-11135 - KVM: x86: use Intel speculation bugs and features as derived in generic x86 code - x86/msr: Add the IA32_TSX_CTRL MSR - x86/cpu: Add a helper function x86_read_arch_cap_msr() - x86/cpu: Add a "tsx=" cmdline option with TSX disabled by default - x86/speculation/taa: Add mitigation for TSX Async Abort - x86/speculation/taa: Add sysfs reporting for TSX Async Abort - kvm/x86: Export MDS_NO=0 to guests when TSX is enabled - x86/tsx: Add "auto" option to the tsx= cmdline parameter - x86/speculation/taa: Add documentation for TSX Async Abort - x86/tsx: Add config options to set tsx=on|off|auto - SAUCE: x86/speculation/taa: Call tsx_init() - [Config] Disable TSX by default when possible * CVE-2019-0154 - SAUCE: drm/i915: Lower RM timeout to avoid DSI hard hangs - SAUCE: drm/i915/gen8+: Add RC6 CTX corruption WA * CVE-2019-0155 - SAUCE: drm/i915: Rename gen7 cmdparser tables - SAUCE: drm/i915: Disable Secure Batches for gen6+ - SAUCE: drm/i915: Remove Master tables from cmdparser - SAUCE: drm/i915: Add support for mandatory cmdparsing - SAUCE: drm/i915: Support ro ppgtt mapped cmdparser shadow buffers - SAUCE: drm/i915: Allow parsing of unsized batches - SAUCE: drm/i915: Add gen9 BCS cmdparsing - SAUCE: drm/i915/cmdparser: Use explicit goto for error paths - SAUCE: drm/i915/cmdparser: Add support for backward jumps - SAUCE: drm/i915/cmdparser: Ignore Length operands during command matching linux (5.0.0-34.36) disco; urgency=medium * disco/linux: -proposed tracker (LP: #1850574) * [REGRESSION] md/raid0: cannot assemble multi-zone RAID0 with default_layout setting (LP: #1849682) - Revert "md/raid0: avoid RAID0 data corruption due to layout confusion." linux (5.0.0-33.35) disco; urgency=medium * disco/linux: 5.0.0-33.35 -proposed tracker (LP: #1849003) * Disco update: upstream stable patchset 2019-10-18 (LP: #1848817) - tpm: use tpm_try_get_ops() in tpm-sysfs.c. - drm/bridge: tc358767: Increase AUX transfer length limit - drm/panel: simple: fix AUO g185han01 horizontal blanking - video: ssd1307fb: Start page range at page_offset - drm/stm: attach gem fence to atomic state - drm/panel: check failure cases in the probe func - drm/rockchip: Check for fast link training before enabling psr - drm/radeon: Fix EEH during kexec - gpu: drm: radeon: Fix a possible null-pointer dereference in radeon_connector_set_property() - PCI: rpaphp: Avoid a sometimes-uninitialized warning - ipmi_si: Only schedule continuously in the thread in maintenance mode - clk: qoriq: Fix -Wunused-const-variable - clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks - drm/amd/display: fix issue where 252-255 values are clipped - drm/amd/display: reprogram VM config when system resume - powerpc/powernv/ioda2: Allocate TCE table levels on demand for default DMA window - clk: actions: Don't reference clk_init_data after registration - clk: sirf: Don't reference clk_init_data after registration - clk: sprd: Don't reference clk_init_data after registration - clk: zx296718: Don't reference clk_init_data after registration - powerpc/xmon: Check for HV mode when dumping XIVE info from OPAL - powerpc/rtas: use device model APIs and serialization during LPM - powerpc/futex: Fix warning: 'oldval' may be used
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
This bug was fixed in the package linux - 4.15.0-69.78 --- linux (4.15.0-69.78) bionic; urgency=medium * KVM NULL pointer deref (LP: #1851205) - KVM: nVMX: handle page fault in vmread fix * CVE-2018-12207 - KVM: MMU: drop vcpu param in gpte_access - kvm: Convert kvm_lock to a mutex - kvm: x86: Do not release the page inside mmu_set_spte() - KVM: x86: make FNAME(fetch) and __direct_map more similar - KVM: x86: remove now unneeded hugepage gfn adjustment - KVM: x86: change kvm_mmu_page_get_gfn BUG_ON to WARN_ON - KVM: x86: add tracepoints around __direct_map and FNAME(fetch) - kvm: x86, powerpc: do not allow clearing largepages debugfs entry - SAUCE: KVM: vmx, svm: always run with EFER.NXE=1 when shadow paging is active - SAUCE: x86: Add ITLB_MULTIHIT bug infrastructure - SAUCE: kvm: mmu: ITLB_MULTIHIT mitigation - SAUCE: kvm: Add helper function for creating VM worker threads - SAUCE: kvm: x86: mmu: Recovery of shattered NX large pages - SAUCE: cpu/speculation: Uninline and export CPU mitigations helpers - SAUCE: kvm: x86: mmu: Apply global mitigations knob to ITLB_MULTIHIT * CVE-2019-11135 - KVM: x86: use Intel speculation bugs and features as derived in generic x86 code - x86/msr: Add the IA32_TSX_CTRL MSR - x86/cpu: Add a helper function x86_read_arch_cap_msr() - x86/cpu: Add a "tsx=" cmdline option with TSX disabled by default - x86/speculation/taa: Add mitigation for TSX Async Abort - x86/speculation/taa: Add sysfs reporting for TSX Async Abort - kvm/x86: Export MDS_NO=0 to guests when TSX is enabled - x86/tsx: Add "auto" option to the tsx= cmdline parameter - x86/speculation/taa: Add documentation for TSX Async Abort - x86/tsx: Add config options to set tsx=on|off|auto - SAUCE: x86/speculation/taa: Call tsx_init() - SAUCE: x86/cpu: Include cpu header from bugs.c - [Config] Disable TSX by default when possible * CVE-2019-0154 - SAUCE: drm/i915: Lower RM timeout to avoid DSI hard hangs - SAUCE: drm/i915/gen8+: Add RC6 CTX corruption WA * CVE-2019-0155 - drm/i915/gtt: Add read only pages to gen8_pte_encode - drm/i915/gtt: Read-only pages for insert_entries on bdw+ - drm/i915/gtt: Disable read-only support under GVT - drm/i915: Prevent writing into a read-only object via a GGTT mmap - drm/i915/cmdparser: Check reg_table_count before derefencing. - drm/i915/cmdparser: Do not check past the cmd length. - drm/i915: Silence smatch for cmdparser - drm/i915: Move engine->needs_cmd_parser to engine->flags - SAUCE: drm/i915: Rename gen7 cmdparser tables - SAUCE: drm/i915: Disable Secure Batches for gen6+ - SAUCE: drm/i915: Remove Master tables from cmdparser - SAUCE: drm/i915: Add support for mandatory cmdparsing - SAUCE: drm/i915: Support ro ppgtt mapped cmdparser shadow buffers - SAUCE: drm/i915: Allow parsing of unsized batches - SAUCE: drm/i915: Add gen9 BCS cmdparsing - SAUCE: drm/i915/cmdparser: Use explicit goto for error paths - SAUCE: drm/i915/cmdparser: Add support for backward jumps - SAUCE: drm/i915/cmdparser: Ignore Length operands during command matching linux (4.15.0-68.77) bionic; urgency=medium * bionic/linux: 4.15.0-68.77 -proposed tracker (LP: #1849855) * [REGRESSION] md/raid0: cannot assemble multi-zone RAID0 with default_layout setting (LP: #1849682) - Revert "md/raid0: avoid RAID0 data corruption due to layout confusion." linux (4.15.0-67.76) bionic; urgency=medium * bionic/linux: 4.15.0-67.76 -proposed tracker (LP: #1849035) * Unexpected CFS throttling (LP: #1832151) - sched/fair: Add lsub_positive() and use it consistently - sched/fair: Fix low cpu usage with high throttling by removing expiration of cpu-local slices - sched/fair: Fix -Wunused-but-set-variable warnings * [CML] New device IDs for CML-U (LP: #1843774) - i2c: i801: Add support for Intel Comet Lake - spi: pxa2xx: Add support for Intel Comet Lake * CVE-2019-17666 - SAUCE: rtlwifi: rtl8822b: Fix potential overflow on P2P code - SAUCE: rtlwifi: Fix potential overflow on P2P code * md raid0/linear doesn't show error state if an array member is removed and allows successful writes (LP: #1847773) - md raid0/linear: Mark array as 'broken' and fail BIOs if a member is gone * Change Config Option CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE for s390x from yes to no (LP: #1848492) - [Config] Change Config Option CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE for s390x from yes to no * [Packaging] Support building Flattened Image Tree (FIT) kernels (LP: #1847969) - [Packaging] add rules to build FIT image - [Packaging] force creation of headers directory * bcache: Performance degradation when querying priority_stats (LP: #1840043) - bcache: add cond_resched() in __bch_cache_cmp() * Add installer support
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
** Tags removed: verification-needed-disco verification-needed-eoan ** Tags added: verification-done-disco verification-done-eoan -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1847063 Title: Fix non-working Realtek USB ethernet after system resume Status in HWE Next: New Status in linux package in Ubuntu: Fix Committed Status in linux-oem package in Ubuntu: New Status in linux-oem-osp1 package in Ubuntu: New Status in linux source package in Bionic: Fix Committed Status in linux-oem source package in Bionic: Fix Released Status in linux-oem-osp1 source package in Bionic: Fix Released Status in linux source package in Disco: Fix Committed Status in linux-oem source package in Disco: Fix Released Status in linux-oem-osp1 source package in Disco: Fix Released Status in linux source package in Eoan: Fix Committed Status in linux-oem source package in Eoan: Fix Released Status in linux-oem-osp1 source package in Eoan: Fix Released Bug description: [Impact] If mac passthrough is enbled, Realtek USB ethernet (r8152) doesn't work under the following steps: 1. Connect to a Dell dock 2. Suspend the system 3. Re-plug the dock 4. Resume the system 5. Ethernet stops working [Fix] The USB port lose its power when the dock gets replugged, so we need to re-write the MAC address at reset_resume callback. [Test] The fix is succesfully tested on Dell WD15 dock and TB16 dock. [Regression Potential] Low. The fix limits to one single device and only take affect when MAC passthrough is enabled. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1847063/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
This bug is awaiting verification that the kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed- eoan' to 'verification-done-eoan'. If the problem still exists, change the tag 'verification-needed-eoan' to 'verification-failed-eoan'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: verification-needed-eoan -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1847063 Title: Fix non-working Realtek USB ethernet after system resume Status in HWE Next: New Status in linux package in Ubuntu: Fix Committed Status in linux-oem package in Ubuntu: New Status in linux-oem-osp1 package in Ubuntu: New Status in linux source package in Bionic: Fix Committed Status in linux-oem source package in Bionic: Fix Released Status in linux-oem-osp1 source package in Bionic: Fix Released Status in linux source package in Disco: Fix Committed Status in linux-oem source package in Disco: Fix Released Status in linux-oem-osp1 source package in Disco: Fix Released Status in linux source package in Eoan: Fix Committed Status in linux-oem source package in Eoan: Fix Released Status in linux-oem-osp1 source package in Eoan: Fix Released Bug description: [Impact] If mac passthrough is enbled, Realtek USB ethernet (r8152) doesn't work under the following steps: 1. Connect to a Dell dock 2. Suspend the system 3. Re-plug the dock 4. Resume the system 5. Ethernet stops working [Fix] The USB port lose its power when the dock gets replugged, so we need to re-write the MAC address at reset_resume callback. [Test] The fix is succesfully tested on Dell WD15 dock and TB16 dock. [Regression Potential] Low. The fix limits to one single device and only take affect when MAC passthrough is enabled. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1847063/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
This bug is awaiting verification that the kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed- disco' to 'verification-done-disco'. If the problem still exists, change the tag 'verification-needed-disco' to 'verification-failed-disco'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: verification-needed-disco -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1847063 Title: Fix non-working Realtek USB ethernet after system resume Status in HWE Next: New Status in linux package in Ubuntu: Fix Committed Status in linux-oem package in Ubuntu: New Status in linux-oem-osp1 package in Ubuntu: New Status in linux source package in Bionic: Fix Committed Status in linux-oem source package in Bionic: Fix Released Status in linux-oem-osp1 source package in Bionic: Fix Released Status in linux source package in Disco: Fix Committed Status in linux-oem source package in Disco: Fix Released Status in linux-oem-osp1 source package in Disco: Fix Released Status in linux source package in Eoan: Fix Committed Status in linux-oem source package in Eoan: Fix Released Status in linux-oem-osp1 source package in Eoan: Fix Released Bug description: [Impact] If mac passthrough is enbled, Realtek USB ethernet (r8152) doesn't work under the following steps: 1. Connect to a Dell dock 2. Suspend the system 3. Re-plug the dock 4. Resume the system 5. Ethernet stops working [Fix] The USB port lose its power when the dock gets replugged, so we need to re-write the MAC address at reset_resume callback. [Test] The fix is succesfully tested on Dell WD15 dock and TB16 dock. [Regression Potential] Low. The fix limits to one single device and only take affect when MAC passthrough is enabled. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1847063/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
This bug was fixed in the package linux-oem - 4.15.0-1059.68 --- linux-oem (4.15.0-1059.68) bionic; urgency=medium * bionic/linux-oem: 4.15.0-1059.68 -proposed tracker (LP: #1847801) * Fix non-working Realtek USB ethernet after system resume (LP: #1847063) - r8152: remove extra action copying ethernet address - r8152: Refresh MAC address during USBDEVFS_RESET - r8152: Set macpassthru in reset_resume callback * [CML-U] Comet lake platform need ISH driver support (LP: #1843775) - HID: intel-ish-hid: Add Comet Lake PCI device ID * [SRU][OEM-B]UBUNTU: SAUCE: enable adjusting brightness on some samsung OLED panels (LP: #1844798) - SAUCE: i915: intel_dp_aux_backlight: Fix max backlight calculations - SAUCE: drm/i915: customize DPCD brightness control for specific panel -- Timo Aaltonen Fri, 11 Oct 2019 20:54:45 +0300 ** Changed in: linux-oem (Ubuntu Eoan) Status: Won't Fix => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1847063 Title: Fix non-working Realtek USB ethernet after system resume Status in HWE Next: New Status in linux package in Ubuntu: Fix Committed Status in linux-oem package in Ubuntu: New Status in linux-oem-osp1 package in Ubuntu: New Status in linux source package in Bionic: Fix Committed Status in linux-oem source package in Bionic: Fix Released Status in linux-oem-osp1 source package in Bionic: Fix Released Status in linux source package in Disco: Fix Committed Status in linux-oem source package in Disco: Fix Released Status in linux-oem-osp1 source package in Disco: Fix Released Status in linux source package in Eoan: Fix Committed Status in linux-oem source package in Eoan: Fix Released Status in linux-oem-osp1 source package in Eoan: Fix Released Bug description: [Impact] If mac passthrough is enbled, Realtek USB ethernet (r8152) doesn't work under the following steps: 1. Connect to a Dell dock 2. Suspend the system 3. Re-plug the dock 4. Resume the system 5. Ethernet stops working [Fix] The USB port lose its power when the dock gets replugged, so we need to re-write the MAC address at reset_resume callback. [Test] The fix is succesfully tested on Dell WD15 dock and TB16 dock. [Regression Potential] Low. The fix limits to one single device and only take affect when MAC passthrough is enabled. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1847063/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
This bug was fixed in the package linux-oem-osp1 - 5.0.0-1025.28 --- linux-oem-osp1 (5.0.0-1025.28) bionic; urgency=medium * bionic/linux-oem-osp1: 5.0.0-1025.28 -proposed tracker (LP: #1846095) * Fix non-working Realtek USB ethernet after system resume (LP: #1847063) - r8152: remove extra action copying ethernet address - r8152: Refresh MAC address during USBDEVFS_RESET - r8152: Set macpassthru in reset_resume callback * drm/i915: Fix the issue of "azx_get_response timeout" for hdmi audio on ICL platforms (LP: #1847192) - SAUCE: drm/i915: Fix audio power up sequence for gen10+ display - SAUCE: drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms * [CML-U] Comet lake platform need ISH driver support (LP: #1843775) - HID: intel-ish-hid: Add Comet Lake PCI device ID * [CML] New device IDs for CML-U (LP: #1843774) - spi-nor: intel-spi: Add support for Intel Comet Lake SPI serial flash * Add new pci-id's for CML-S, ICL (LP: #1845317) - drm/i915/icl: Add missing device ID - drm/i915/cml: Add Missing PCI IDs * Thunderbolt support for ICL (LP: #1844680) - thunderbolt: Drop duplicated get_switch_at_route() - thunderbolt: Move LC specific functionality into a separate file - thunderbolt: Cache adapter specific capability offset into struct port - thunderbolt: Rename tunnel_pci to tunnel - thunderbolt: Generalize tunnel creation functionality - thunderbolt: Add functions for allocating and releasing HopIDs - thunderbolt: Assign remote for both ports in case of dual link - thunderbolt: Add helper function to iterate from one port to another - thunderbolt: Extend tunnel creation to more than 2 adjacent switches - thunderbolt: Correct path indices for PCIe tunnel - thunderbolt: Move NVM upgrade support flag to struct icm - thunderbolt: Use 32-bit writes when writing ring producer/consumer - thunderbolt: Do not fail adding switch if some port is not implemented - thunderbolt: Hide switch attributes that are not set - thunderbolt: Expose active parts of NVM even if upgrade is not supported - thunderbolt: Add support for Intel Ice Lake - ACPI / property: Add two new Thunderbolt property GUIDs to the list * Intel 1650s/Wi-Fi 6 AX201 cannot connect to 802.11AX networks (LP: #1845138) - cfg80211: add and use strongly typed element iteration macros - mac80211: use element iteration macro in parsing - cfg80211: add various struct element finding helpers - nl80211: use for_each_element() in validate_ie_attr() - mac80211: pass bssids to elements parsing function - mac80211: move the bss update from elements to an helper - cfg80211: Parsing of Multiple BSSID information in scanning - cfg80211: use for_each_element() for multi-bssid parsing - cfg80211: Properly track transmitting and non-transmitting BSS - cfg80211: Move Multiple BSS info to struct cfg80211_bss to be visible - cfg80211: parse multi-bssid only if HW supports it - cfg80211: make BSSID generation function inline - cfg80211: save multi-bssid properties - mac80211: support multi-bssid - mac80211: indicate support for multiple BSSID - cfg80211: fix the IE inheritance of extension IEs - cfg80211: fix memory leak of new_ie - mac80211_hwsim: Declare support for Multi-BSSID - cfg80211: add missing kernel-doc for multi-BSSID fields - iwlwifi: mvm: support multiple BSSID - iwlwifi: mvm: support HE context cmd API change * Packaging resync (LP: #1786013) - [Packaging] update helper scripts [ Ubuntu: 5.0.0-32.34 ] * disco/linux: 5.0.0-32.34 -proposed tracker (LP: #1846097) * CVE-2019-14814 // CVE-2019-14815 // CVE-2019-14816 - mwifiex: Fix three heap overflow at parsing element in cfg80211_ap_settings * CVE-2019-15505 - media: technisat-usb2: break out of loop at end of buffer * CVE-2019-2181 - binder: check for overflow when alloc for security context * Support Hi1620 zip hw accelerator (LP: #1845355) - [Config] Enable HiSilicon QM/ZIP as modules - crypto: hisilicon - add queue management driver for HiSilicon QM module - crypto: hisilicon - add hardware SGL support - crypto: hisilicon - add HiSilicon ZIP accelerator support - crypto: hisilicon - add SRIOV support for ZIP - Documentation: Add debugfs doc for hisi_zip - crypto: hisilicon - add debugfs for ZIP and QM - MAINTAINERS: add maintainer for HiSilicon QM and ZIP controller driver - crypto: hisilicon - fix kbuild warnings - crypto: hisilicon - add dependency for CRYPTO_DEV_HISI_ZIP - crypto: hisilicon - init curr_sgl_dma to fix compile warning - crypto: hisilicon - add missing single_release - crypto: hisilicon - fix error handle in hisi_zip_create_req_q - crypto: hisilicon - Fix warning on printing %p with dma_addr_t - crypto: hisilicon - Fix return value check in hisi_zip_acompress()
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
This bug was fixed in the package linux-oem-osp1 - 5.0.0-1025.28 --- linux-oem-osp1 (5.0.0-1025.28) bionic; urgency=medium * bionic/linux-oem-osp1: 5.0.0-1025.28 -proposed tracker (LP: #1846095) * Fix non-working Realtek USB ethernet after system resume (LP: #1847063) - r8152: remove extra action copying ethernet address - r8152: Refresh MAC address during USBDEVFS_RESET - r8152: Set macpassthru in reset_resume callback * drm/i915: Fix the issue of "azx_get_response timeout" for hdmi audio on ICL platforms (LP: #1847192) - SAUCE: drm/i915: Fix audio power up sequence for gen10+ display - SAUCE: drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms * [CML-U] Comet lake platform need ISH driver support (LP: #1843775) - HID: intel-ish-hid: Add Comet Lake PCI device ID * [CML] New device IDs for CML-U (LP: #1843774) - spi-nor: intel-spi: Add support for Intel Comet Lake SPI serial flash * Add new pci-id's for CML-S, ICL (LP: #1845317) - drm/i915/icl: Add missing device ID - drm/i915/cml: Add Missing PCI IDs * Thunderbolt support for ICL (LP: #1844680) - thunderbolt: Drop duplicated get_switch_at_route() - thunderbolt: Move LC specific functionality into a separate file - thunderbolt: Cache adapter specific capability offset into struct port - thunderbolt: Rename tunnel_pci to tunnel - thunderbolt: Generalize tunnel creation functionality - thunderbolt: Add functions for allocating and releasing HopIDs - thunderbolt: Assign remote for both ports in case of dual link - thunderbolt: Add helper function to iterate from one port to another - thunderbolt: Extend tunnel creation to more than 2 adjacent switches - thunderbolt: Correct path indices for PCIe tunnel - thunderbolt: Move NVM upgrade support flag to struct icm - thunderbolt: Use 32-bit writes when writing ring producer/consumer - thunderbolt: Do not fail adding switch if some port is not implemented - thunderbolt: Hide switch attributes that are not set - thunderbolt: Expose active parts of NVM even if upgrade is not supported - thunderbolt: Add support for Intel Ice Lake - ACPI / property: Add two new Thunderbolt property GUIDs to the list * Intel 1650s/Wi-Fi 6 AX201 cannot connect to 802.11AX networks (LP: #1845138) - cfg80211: add and use strongly typed element iteration macros - mac80211: use element iteration macro in parsing - cfg80211: add various struct element finding helpers - nl80211: use for_each_element() in validate_ie_attr() - mac80211: pass bssids to elements parsing function - mac80211: move the bss update from elements to an helper - cfg80211: Parsing of Multiple BSSID information in scanning - cfg80211: use for_each_element() for multi-bssid parsing - cfg80211: Properly track transmitting and non-transmitting BSS - cfg80211: Move Multiple BSS info to struct cfg80211_bss to be visible - cfg80211: parse multi-bssid only if HW supports it - cfg80211: make BSSID generation function inline - cfg80211: save multi-bssid properties - mac80211: support multi-bssid - mac80211: indicate support for multiple BSSID - cfg80211: fix the IE inheritance of extension IEs - cfg80211: fix memory leak of new_ie - mac80211_hwsim: Declare support for Multi-BSSID - cfg80211: add missing kernel-doc for multi-BSSID fields - iwlwifi: mvm: support multiple BSSID - iwlwifi: mvm: support HE context cmd API change * Packaging resync (LP: #1786013) - [Packaging] update helper scripts [ Ubuntu: 5.0.0-32.34 ] * disco/linux: 5.0.0-32.34 -proposed tracker (LP: #1846097) * CVE-2019-14814 // CVE-2019-14815 // CVE-2019-14816 - mwifiex: Fix three heap overflow at parsing element in cfg80211_ap_settings * CVE-2019-15505 - media: technisat-usb2: break out of loop at end of buffer * CVE-2019-2181 - binder: check for overflow when alloc for security context * Support Hi1620 zip hw accelerator (LP: #1845355) - [Config] Enable HiSilicon QM/ZIP as modules - crypto: hisilicon - add queue management driver for HiSilicon QM module - crypto: hisilicon - add hardware SGL support - crypto: hisilicon - add HiSilicon ZIP accelerator support - crypto: hisilicon - add SRIOV support for ZIP - Documentation: Add debugfs doc for hisi_zip - crypto: hisilicon - add debugfs for ZIP and QM - MAINTAINERS: add maintainer for HiSilicon QM and ZIP controller driver - crypto: hisilicon - fix kbuild warnings - crypto: hisilicon - add dependency for CRYPTO_DEV_HISI_ZIP - crypto: hisilicon - init curr_sgl_dma to fix compile warning - crypto: hisilicon - add missing single_release - crypto: hisilicon - fix error handle in hisi_zip_create_req_q - crypto: hisilicon - Fix warning on printing %p with dma_addr_t - crypto: hisilicon - Fix return value check in hisi_zip_acompress()
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
This bug was fixed in the package linux-oem - 4.15.0-1059.68 --- linux-oem (4.15.0-1059.68) bionic; urgency=medium * bionic/linux-oem: 4.15.0-1059.68 -proposed tracker (LP: #1847801) * Fix non-working Realtek USB ethernet after system resume (LP: #1847063) - r8152: remove extra action copying ethernet address - r8152: Refresh MAC address during USBDEVFS_RESET - r8152: Set macpassthru in reset_resume callback * [CML-U] Comet lake platform need ISH driver support (LP: #1843775) - HID: intel-ish-hid: Add Comet Lake PCI device ID * [SRU][OEM-B]UBUNTU: SAUCE: enable adjusting brightness on some samsung OLED panels (LP: #1844798) - SAUCE: i915: intel_dp_aux_backlight: Fix max backlight calculations - SAUCE: drm/i915: customize DPCD brightness control for specific panel -- Timo Aaltonen Fri, 11 Oct 2019 20:54:45 +0300 ** Changed in: linux-oem (Ubuntu Disco) Status: Won't Fix => Fix Released ** Changed in: linux-oem-osp1 (Ubuntu Disco) Status: Won't Fix => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1847063 Title: Fix non-working Realtek USB ethernet after system resume Status in HWE Next: New Status in linux package in Ubuntu: Fix Committed Status in linux-oem package in Ubuntu: New Status in linux-oem-osp1 package in Ubuntu: New Status in linux source package in Bionic: Fix Committed Status in linux-oem source package in Bionic: Fix Released Status in linux-oem-osp1 source package in Bionic: Fix Released Status in linux source package in Disco: Fix Committed Status in linux-oem source package in Disco: Fix Released Status in linux-oem-osp1 source package in Disco: Fix Released Status in linux source package in Eoan: Fix Committed Status in linux-oem source package in Eoan: Won't Fix Status in linux-oem-osp1 source package in Eoan: Won't Fix Bug description: [Impact] If mac passthrough is enbled, Realtek USB ethernet (r8152) doesn't work under the following steps: 1. Connect to a Dell dock 2. Suspend the system 3. Re-plug the dock 4. Resume the system 5. Ethernet stops working [Fix] The USB port lose its power when the dock gets replugged, so we need to re-write the MAC address at reset_resume callback. [Test] The fix is succesfully tested on Dell WD15 dock and TB16 dock. [Regression Potential] Low. The fix limits to one single device and only take affect when MAC passthrough is enabled. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1847063/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
This bug was fixed in the package linux-oem - 4.15.0-1059.68 --- linux-oem (4.15.0-1059.68) bionic; urgency=medium * bionic/linux-oem: 4.15.0-1059.68 -proposed tracker (LP: #1847801) * Fix non-working Realtek USB ethernet after system resume (LP: #1847063) - r8152: remove extra action copying ethernet address - r8152: Refresh MAC address during USBDEVFS_RESET - r8152: Set macpassthru in reset_resume callback * [CML-U] Comet lake platform need ISH driver support (LP: #1843775) - HID: intel-ish-hid: Add Comet Lake PCI device ID * [SRU][OEM-B]UBUNTU: SAUCE: enable adjusting brightness on some samsung OLED panels (LP: #1844798) - SAUCE: i915: intel_dp_aux_backlight: Fix max backlight calculations - SAUCE: drm/i915: customize DPCD brightness control for specific panel -- Timo Aaltonen Fri, 11 Oct 2019 20:54:45 +0300 ** Changed in: linux-oem (Ubuntu Bionic) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1847063 Title: Fix non-working Realtek USB ethernet after system resume Status in HWE Next: New Status in linux package in Ubuntu: Fix Committed Status in linux-oem package in Ubuntu: New Status in linux-oem-osp1 package in Ubuntu: New Status in linux source package in Bionic: Fix Committed Status in linux-oem source package in Bionic: Fix Released Status in linux-oem-osp1 source package in Bionic: Fix Released Status in linux source package in Disco: Fix Committed Status in linux-oem source package in Disco: Won't Fix Status in linux-oem-osp1 source package in Disco: Won't Fix Status in linux source package in Eoan: Fix Committed Status in linux-oem source package in Eoan: Won't Fix Status in linux-oem-osp1 source package in Eoan: Won't Fix Bug description: [Impact] If mac passthrough is enbled, Realtek USB ethernet (r8152) doesn't work under the following steps: 1. Connect to a Dell dock 2. Suspend the system 3. Re-plug the dock 4. Resume the system 5. Ethernet stops working [Fix] The USB port lose its power when the dock gets replugged, so we need to re-write the MAC address at reset_resume callback. [Test] The fix is succesfully tested on Dell WD15 dock and TB16 dock. [Regression Potential] Low. The fix limits to one single device and only take affect when MAC passthrough is enabled. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1847063/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
This bug was fixed in the package linux-oem-osp1 - 5.0.0-1025.28 --- linux-oem-osp1 (5.0.0-1025.28) bionic; urgency=medium * bionic/linux-oem-osp1: 5.0.0-1025.28 -proposed tracker (LP: #1846095) * Fix non-working Realtek USB ethernet after system resume (LP: #1847063) - r8152: remove extra action copying ethernet address - r8152: Refresh MAC address during USBDEVFS_RESET - r8152: Set macpassthru in reset_resume callback * drm/i915: Fix the issue of "azx_get_response timeout" for hdmi audio on ICL platforms (LP: #1847192) - SAUCE: drm/i915: Fix audio power up sequence for gen10+ display - SAUCE: drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms * [CML-U] Comet lake platform need ISH driver support (LP: #1843775) - HID: intel-ish-hid: Add Comet Lake PCI device ID * [CML] New device IDs for CML-U (LP: #1843774) - spi-nor: intel-spi: Add support for Intel Comet Lake SPI serial flash * Add new pci-id's for CML-S, ICL (LP: #1845317) - drm/i915/icl: Add missing device ID - drm/i915/cml: Add Missing PCI IDs * Thunderbolt support for ICL (LP: #1844680) - thunderbolt: Drop duplicated get_switch_at_route() - thunderbolt: Move LC specific functionality into a separate file - thunderbolt: Cache adapter specific capability offset into struct port - thunderbolt: Rename tunnel_pci to tunnel - thunderbolt: Generalize tunnel creation functionality - thunderbolt: Add functions for allocating and releasing HopIDs - thunderbolt: Assign remote for both ports in case of dual link - thunderbolt: Add helper function to iterate from one port to another - thunderbolt: Extend tunnel creation to more than 2 adjacent switches - thunderbolt: Correct path indices for PCIe tunnel - thunderbolt: Move NVM upgrade support flag to struct icm - thunderbolt: Use 32-bit writes when writing ring producer/consumer - thunderbolt: Do not fail adding switch if some port is not implemented - thunderbolt: Hide switch attributes that are not set - thunderbolt: Expose active parts of NVM even if upgrade is not supported - thunderbolt: Add support for Intel Ice Lake - ACPI / property: Add two new Thunderbolt property GUIDs to the list * Intel 1650s/Wi-Fi 6 AX201 cannot connect to 802.11AX networks (LP: #1845138) - cfg80211: add and use strongly typed element iteration macros - mac80211: use element iteration macro in parsing - cfg80211: add various struct element finding helpers - nl80211: use for_each_element() in validate_ie_attr() - mac80211: pass bssids to elements parsing function - mac80211: move the bss update from elements to an helper - cfg80211: Parsing of Multiple BSSID information in scanning - cfg80211: use for_each_element() for multi-bssid parsing - cfg80211: Properly track transmitting and non-transmitting BSS - cfg80211: Move Multiple BSS info to struct cfg80211_bss to be visible - cfg80211: parse multi-bssid only if HW supports it - cfg80211: make BSSID generation function inline - cfg80211: save multi-bssid properties - mac80211: support multi-bssid - mac80211: indicate support for multiple BSSID - cfg80211: fix the IE inheritance of extension IEs - cfg80211: fix memory leak of new_ie - mac80211_hwsim: Declare support for Multi-BSSID - cfg80211: add missing kernel-doc for multi-BSSID fields - iwlwifi: mvm: support multiple BSSID - iwlwifi: mvm: support HE context cmd API change * Packaging resync (LP: #1786013) - [Packaging] update helper scripts [ Ubuntu: 5.0.0-32.34 ] * disco/linux: 5.0.0-32.34 -proposed tracker (LP: #1846097) * CVE-2019-14814 // CVE-2019-14815 // CVE-2019-14816 - mwifiex: Fix three heap overflow at parsing element in cfg80211_ap_settings * CVE-2019-15505 - media: technisat-usb2: break out of loop at end of buffer * CVE-2019-2181 - binder: check for overflow when alloc for security context * Support Hi1620 zip hw accelerator (LP: #1845355) - [Config] Enable HiSilicon QM/ZIP as modules - crypto: hisilicon - add queue management driver for HiSilicon QM module - crypto: hisilicon - add hardware SGL support - crypto: hisilicon - add HiSilicon ZIP accelerator support - crypto: hisilicon - add SRIOV support for ZIP - Documentation: Add debugfs doc for hisi_zip - crypto: hisilicon - add debugfs for ZIP and QM - MAINTAINERS: add maintainer for HiSilicon QM and ZIP controller driver - crypto: hisilicon - fix kbuild warnings - crypto: hisilicon - add dependency for CRYPTO_DEV_HISI_ZIP - crypto: hisilicon - init curr_sgl_dma to fix compile warning - crypto: hisilicon - add missing single_release - crypto: hisilicon - fix error handle in hisi_zip_create_req_q - crypto: hisilicon - Fix warning on printing %p with dma_addr_t - crypto: hisilicon - Fix return value check in hisi_zip_acompress()
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
** Changed in: linux (Ubuntu Disco) Status: Incomplete => Fix Committed ** Changed in: linux (Ubuntu Eoan) Status: Incomplete => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1847063 Title: Fix non-working Realtek USB ethernet after system resume Status in HWE Next: New Status in linux package in Ubuntu: Fix Committed Status in linux-oem package in Ubuntu: New Status in linux-oem-osp1 package in Ubuntu: New Status in linux source package in Bionic: Fix Committed Status in linux-oem source package in Bionic: Fix Committed Status in linux-oem-osp1 source package in Bionic: Fix Committed Status in linux source package in Disco: Fix Committed Status in linux-oem source package in Disco: Won't Fix Status in linux-oem-osp1 source package in Disco: Won't Fix Status in linux source package in Eoan: Fix Committed Status in linux-oem source package in Eoan: Won't Fix Status in linux-oem-osp1 source package in Eoan: Won't Fix Bug description: [Impact] If mac passthrough is enbled, Realtek USB ethernet (r8152) doesn't work under the following steps: 1. Connect to a Dell dock 2. Suspend the system 3. Re-plug the dock 4. Resume the system 5. Ethernet stops working [Fix] The USB port lose its power when the dock gets replugged, so we need to re-write the MAC address at reset_resume callback. [Test] The fix is succesfully tested on Dell WD15 dock and TB16 dock. [Regression Potential] Low. The fix limits to one single device and only take affect when MAC passthrough is enabled. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1847063/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
** Changed in: linux (Ubuntu Bionic) Status: Incomplete => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1847063 Title: Fix non-working Realtek USB ethernet after system resume Status in HWE Next: New Status in linux package in Ubuntu: Incomplete Status in linux-oem package in Ubuntu: New Status in linux-oem-osp1 package in Ubuntu: New Status in linux source package in Bionic: Fix Committed Status in linux-oem source package in Bionic: Fix Committed Status in linux-oem-osp1 source package in Bionic: Fix Committed Status in linux source package in Disco: Fix Committed Status in linux-oem source package in Disco: Won't Fix Status in linux-oem-osp1 source package in Disco: Won't Fix Status in linux source package in Eoan: Incomplete Status in linux-oem source package in Eoan: Won't Fix Status in linux-oem-osp1 source package in Eoan: Won't Fix Bug description: [Impact] If mac passthrough is enbled, Realtek USB ethernet (r8152) doesn't work under the following steps: 1. Connect to a Dell dock 2. Suspend the system 3. Re-plug the dock 4. Resume the system 5. Ethernet stops working [Fix] The USB port lose its power when the dock gets replugged, so we need to re-write the MAC address at reset_resume callback. [Test] The fix is succesfully tested on Dell WD15 dock and TB16 dock. [Regression Potential] Low. The fix limits to one single device and only take affect when MAC passthrough is enabled. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1847063/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
** Tags removed: verification-needed-bionic ** Tags added: verification-done-bionic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1847063 Title: Fix non-working Realtek USB ethernet after system resume Status in HWE Next: New Status in linux package in Ubuntu: Incomplete Status in linux-oem package in Ubuntu: New Status in linux-oem-osp1 package in Ubuntu: New Status in linux source package in Bionic: Incomplete Status in linux-oem source package in Bionic: Fix Committed Status in linux-oem-osp1 source package in Bionic: Fix Committed Status in linux source package in Disco: Incomplete Status in linux-oem source package in Disco: Won't Fix Status in linux-oem-osp1 source package in Disco: Won't Fix Status in linux source package in Eoan: Incomplete Status in linux-oem source package in Eoan: Won't Fix Status in linux-oem-osp1 source package in Eoan: Won't Fix Bug description: [Impact] If mac passthrough is enbled, Realtek USB ethernet (r8152) doesn't work under the following steps: 1. Connect to a Dell dock 2. Suspend the system 3. Re-plug the dock 4. Resume the system 5. Ethernet stops working [Fix] The USB port lose its power when the dock gets replugged, so we need to re-write the MAC address at reset_resume callback. [Test] The fix is succesfully tested on Dell WD15 dock and TB16 dock. [Regression Potential] Low. The fix limits to one single device and only take affect when MAC passthrough is enabled. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1847063/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
This bug is awaiting verification that the kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed- bionic' to 'verification-done-bionic'. If the problem still exists, change the tag 'verification-needed-bionic' to 'verification-failed- bionic'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: verification-needed-bionic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1847063 Title: Fix non-working Realtek USB ethernet after system resume Status in HWE Next: New Status in linux package in Ubuntu: Incomplete Status in linux-oem package in Ubuntu: New Status in linux-oem-osp1 package in Ubuntu: New Status in linux source package in Bionic: Incomplete Status in linux-oem source package in Bionic: Fix Committed Status in linux-oem-osp1 source package in Bionic: Fix Committed Status in linux source package in Disco: Incomplete Status in linux-oem source package in Disco: Won't Fix Status in linux-oem-osp1 source package in Disco: Won't Fix Status in linux source package in Eoan: Incomplete Status in linux-oem source package in Eoan: Won't Fix Status in linux-oem-osp1 source package in Eoan: Won't Fix Bug description: [Impact] If mac passthrough is enbled, Realtek USB ethernet (r8152) doesn't work under the following steps: 1. Connect to a Dell dock 2. Suspend the system 3. Re-plug the dock 4. Resume the system 5. Ethernet stops working [Fix] The USB port lose its power when the dock gets replugged, so we need to re-write the MAC address at reset_resume callback. [Test] The fix is succesfully tested on Dell WD15 dock and TB16 dock. [Regression Potential] Low. The fix limits to one single device and only take affect when MAC passthrough is enabled. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1847063/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
** Changed in: linux-oem (Ubuntu Bionic) Status: New => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1847063 Title: Fix non-working Realtek USB ethernet after system resume Status in HWE Next: New Status in linux package in Ubuntu: Incomplete Status in linux-oem package in Ubuntu: New Status in linux-oem-osp1 package in Ubuntu: New Status in linux source package in Bionic: Incomplete Status in linux-oem source package in Bionic: Fix Committed Status in linux-oem-osp1 source package in Bionic: Fix Committed Status in linux source package in Disco: Incomplete Status in linux-oem source package in Disco: Won't Fix Status in linux-oem-osp1 source package in Disco: Won't Fix Status in linux source package in Eoan: Incomplete Status in linux-oem source package in Eoan: Won't Fix Status in linux-oem-osp1 source package in Eoan: Won't Fix Bug description: [Impact] If mac passthrough is enbled, Realtek USB ethernet (r8152) doesn't work under the following steps: 1. Connect to a Dell dock 2. Suspend the system 3. Re-plug the dock 4. Resume the system 5. Ethernet stops working [Fix] The USB port lose its power when the dock gets replugged, so we need to re-write the MAC address at reset_resume callback. [Test] The fix is succesfully tested on Dell WD15 dock and TB16 dock. [Regression Potential] Low. The fix limits to one single device and only take affect when MAC passthrough is enabled. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1847063/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1847063] Re: Fix non-working Realtek USB ethernet after system resume
** Changed in: linux-oem-osp1 (Ubuntu Bionic) Status: New => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem in Ubuntu. https://bugs.launchpad.net/bugs/1847063 Title: Fix non-working Realtek USB ethernet after system resume Status in HWE Next: New Status in linux package in Ubuntu: Incomplete Status in linux-oem package in Ubuntu: New Status in linux-oem-osp1 package in Ubuntu: New Status in linux source package in Bionic: Incomplete Status in linux-oem source package in Bionic: New Status in linux-oem-osp1 source package in Bionic: Fix Committed Status in linux source package in Disco: Incomplete Status in linux-oem source package in Disco: Won't Fix Status in linux-oem-osp1 source package in Disco: Won't Fix Status in linux source package in Eoan: Incomplete Status in linux-oem source package in Eoan: Won't Fix Status in linux-oem-osp1 source package in Eoan: Won't Fix Bug description: [Impact] If mac passthrough is enbled, Realtek USB ethernet (r8152) doesn't work under the following steps: 1. Connect to a Dell dock 2. Suspend the system 3. Re-plug the dock 4. Resume the system 5. Ethernet stops working [Fix] The USB port lose its power when the dock gets replugged, so we need to re-write the MAC address at reset_resume callback. [Test] The fix is succesfully tested on Dell WD15 dock and TB16 dock. [Regression Potential] Low. The fix limits to one single device and only take affect when MAC passthrough is enabled. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1847063/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp