[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug is awaiting verification that the linux-mtk/5.15.0-1030.34 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-jammy-linux-mtk' to 'verification-done-jammy- linux-mtk'. If the problem still exists, change the tag 'verification- needed-jammy-linux-mtk' to 'verification-failed-jammy-linux-mtk'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: kernel-spammed-jammy-linux-mtk-v2 verification-needed-jammy-linux-mtk -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Fix Released Status in linux source package in Jammy: Fix Released Status in linux source package in Kinetic: Fix Released Status in linux source package in Lunar: Fix Released Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug is awaiting verification that the linux- aws-6.5/6.5.0-1008.8~22.04.1 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-jammy-linux- aws-6.5' to 'verification-done-jammy-linux-aws-6.5'. If the problem still exists, change the tag 'verification-needed-jammy-linux-aws-6.5' to 'verification-failed-jammy-linux-aws-6.5'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: kernel-spammed-jammy-linux-aws-6.5-v2 verification-needed-jammy-linux-aws-6.5 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Fix Released Status in linux source package in Jammy: Fix Released Status in linux source package in Kinetic: Fix Released Status in linux source package in Lunar: Fix Released Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug is awaiting verification that the linux- azure-6.5/6.5.0-1007.7~22.04.1 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-jammy-linux- azure-6.5' to 'verification-done-jammy-linux-azure-6.5'. If the problem still exists, change the tag 'verification-needed-jammy-linux-azure-6.5' to 'verification-failed-jammy-linux-azure-6.5'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: kernel-spammed-jammy-linux-azure-6.5-v2 verification-needed-jammy-linux-azure-6.5 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Fix Released Status in linux source package in Jammy: Fix Released Status in linux source package in Kinetic: Fix Released Status in linux source package in Lunar: Fix Released Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug is awaiting verification that the linux- aws-5.15/5.15.0-1046.51~20.04.1 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-focal-linux- aws-5.15' to 'verification-done-focal-linux-aws-5.15'. If the problem still exists, change the tag 'verification-needed-focal-linux-aws-5.15' to 'verification-failed-focal-linux-aws-5.15'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: kernel-spammed-focal-linux-aws-5.15-v2 verification-needed-focal-linux-aws-5.15 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Fix Released Status in linux source package in Jammy: Fix Released Status in linux source package in Kinetic: Fix Released Status in linux source package in Lunar: Fix Released Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug is awaiting verification that the linux-aws/5.15.0-1041.46 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-jammy' to 'verification-done-jammy'. If the problem still exists, change the tag 'verification-needed-jammy' to 'verification-failed-jammy'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: kernel-spammed-jammy-linux-aws -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Fix Released Status in linux source package in Jammy: Fix Released Status in linux source package in Kinetic: Fix Released Status in linux source package in Lunar: Fix Released Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug is awaiting verification that the linux-azure/6.2.0-1009.9 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-lunar' to 'verification-done-lunar'. If the problem still exists, change the tag 'verification-needed-lunar' to 'verification-failed-lunar'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: kernel-spammed-lunar-linux-azure verification-needed-lunar -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Fix Released Status in linux source package in Jammy: Fix Released Status in linux source package in Kinetic: Fix Released Status in linux source package in Lunar: Fix Released Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug is awaiting verification that the linux-azure/5.15.0-1043.50 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-jammy' to 'verification-done-jammy'. If the problem still exists, change the tag 'verification-needed-jammy' to 'verification-failed-jammy'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: kernel-spammed-jammy-linux-azure -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Fix Released Status in linux source package in Jammy: Fix Released Status in linux source package in Kinetic: Fix Released Status in linux source package in Lunar: Fix Released Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug is awaiting verification that the linux-nvidia-tegra- igx/5.15.0-1001.1 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-jammy' to 'verification- done-jammy'. If the problem still exists, change the tag 'verification- needed-jammy' to 'verification-failed-jammy'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: kernel-spammed-jammy-linux-nvidia-tegra-igx -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Fix Released Status in linux source package in Jammy: Fix Released Status in linux source package in Kinetic: Fix Released Status in linux source package in Lunar: Fix Released Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug is awaiting verification that the linux-nvidia- tegra/5.15.0-1015.15 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-jammy' to 'verification- done-jammy'. If the problem still exists, change the tag 'verification- needed-jammy' to 'verification-failed-jammy'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags removed: verification-done-jammy ** Tags added: kernel-spammed-jammy-linux-nvidia-tegra verification-needed-jammy -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Fix Released Status in linux source package in Jammy: Fix Released Status in linux source package in Kinetic: Fix Released Status in linux source package in Lunar: Fix Released Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug was fixed in the package linux - 6.3.0-7.7 --- linux (6.3.0-7.7) mantic; urgency=medium * mantic/linux: 6.3.0-7.7 -proposed tracker (LP: #2023297) * Packaging resync (LP: #1786013) - debian/dkms-versions -- update from kernel-versions (main/master) -- Paolo Pisati Thu, 08 Jun 2023 16:44:41 +0200 ** Changed in: linux (Ubuntu) Status: Invalid => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Fix Released Status in linux source package in Jammy: Fix Released Status in linux source package in Kinetic: Fix Released Status in linux source package in Lunar: Fix Released Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug was fixed in the package linux - 6.2.0-23.23 --- linux (6.2.0-23.23) lunar; urgency=medium * lunar/linux: 6.2.0-23.23 -proposed tracker (LP: #2019845) * Packaging resync (LP: #1786013) - [Packaging] update helper scripts - debian/dkms-versions -- update from kernel-versions (main/2023.05.15) * Fix flicker display problem on some panels which support PSR2 (LP: #2002968) - drm/i915/psr: Add continuous full frame bit together with single * Kernel 6.1 bumped the disk consumption on default images by 15% (LP: #2015867) - [Packaging] introduce a separate linux-lib-rust package * Update I915 PSR calculation on Linux 6.2 (LP: #2018655) - drm/i915: Fix fast wake AUX sync len - drm/i915: Explain the magic numbers for AUX SYNC/precharge length * Computer with Intel Atom CPU will not boot with Kernel 6.2.0-20 (LP: #2017444) - [Config]: Disable CONFIG_INTEL_ATOMISP * udev fails to make prctl() syscall with apparmor=0 (as used by maas by default) (LP: #2016908) - SAUCE: (no-up) Stacking v38: Fix prctl() syscall with apparmor=0 * CVE-2023-32233 - netfilter: nf_tables: deactivate anonymous set from preparation phase * CVE-2023-2612 - SAUCE: shiftfs: prevent lock unbalance in shiftfs_create_object() * CVE-2023-31436 - net: sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg * CVE-2023-1380 - wifi: brcmfmac: slab-out-of-bounds read in brcmf_get_assoc_ies() * 5.19 not reporting cgroups v1 blkio.throttle.io_serviced (LP: #2016186) - SAUCE: blk-throttle: Fix io statistics for cgroup v1 * LSM stacking and AppArmor for 6.2: additional fixes (LP: #2017903) - SAUCE: (no-up) apparmor: fix policy_compat perms remap for file dfa - SAUCE: (no-up) apparmor: fix profile verification and enable it - SAUCE: (no-up) apparmor: fix: add missing failure check in compute_xmatch_perms - SAUCE: (no-up) apparmor: fix: kzalloc perms tables for shared dfas * Lunar update: v6.2.12 upstream stable release (LP: #2017219) - Revert "pinctrl: amd: Disable and mask interrupts on resume" - drm/amd/display: Pass the right info to drm_dp_remove_payload - drm/i915: Workaround ICL CSC_MODE sticky arming - ALSA: emu10k1: fix capture interrupt handler unlinking - ALSA: hda/sigmatel: add pin overrides for Intel DP45SG motherboard - ALSA: i2c/cs8427: fix iec958 mixer control deactivation - ALSA: hda: patch_realtek: add quirk for Asus N7601ZM - ALSA: hda/realtek: Add quirks for Lenovo Z13/Z16 Gen2 - ALSA: firewire-tascam: add missing unwind goto in snd_tscm_stream_start_duplex() - ALSA: emu10k1: don't create old pass-through playback device on Audigy - ALSA: hda/sigmatel: fix S/PDIF out on Intel D*45* motherboards - ALSA: hda/hdmi: disable KAE for Intel DG2 - Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp} - Bluetooth: Fix race condition in hidp_session_thread - bluetooth: btbcm: Fix logic error in forming the board name. - Bluetooth: Free potentially unfreed SCO connection - Bluetooth: hci_conn: Fix possible UAF - btrfs: restore the thread_pool= behavior in remount for the end I/O workqueues - btrfs: fix fast csum implementation detection - fbmem: Reject FB_ACTIVATE_KD_TEXT from userspace - mtdblock: tolerate corrected bit-flips - mtd: rawnand: meson: fix bitmask for length in command word - mtd: rawnand: stm32_fmc2: remove unsupported EDO mode - mtd: rawnand: stm32_fmc2: use timings.mode instead of checking tRC_min - KVM: arm64: PMU: Restore the guest's EL0 event counting after migration - fbcon: Fix error paths in set_con2fb_map - fbcon: set_con2fb_map needs to set con2fb_map! - drm/i915/dsi: fix DSS CTL register offsets for TGL+ - io_uring: complete request via task work in case of DEFER_TASKRUN - clk: sprd: set max_register according to mapping range - RDMA/irdma: Do not generate SW completions for NOPs - RDMA/irdma: Fix memory leak of PBLE objects - RDMA/irdma: Increase iWARP CM default rexmit count - RDMA/irdma: Add ipv4 check to irdma_find_listener() - IB/mlx5: Add support for 400G_8X lane speed - RDMA/erdma: Fix some typos - RDMA/erdma: Update default EQ depth to 4096 and max_send_wr to 8192 - RDMA/erdma: Inline mtt entries into WQE if supported - RDMA/erdma: Defer probing if netdevice can not be found - clk: rs9: Fix suspend/resume - RDMA/cma: Allow UD qp_type to join multicast only - bpf: tcp: Use sock_gen_put instead of sock_put in bpf_iter_tcp - LoongArch, bpf: Fix jit to skip speculation barrier opcode - dmaengine: apple-admac: Handle 'global' interrupt flags - dmaengine: apple-admac: Set src_addr_widths capability - dmaengine: apple-admac: Fix 'current_tx' not getting freed - 9p/xen : Fix use after free bug in xen_9pfs_front_remove due to race condition - bpf,
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug was fixed in the package linux - 5.19.0-45.46 --- linux (5.19.0-45.46) kinetic; urgency=medium * kinetic/linux: 5.19.0-45.46 -proposed tracker (LP: #2023057) * Kinetic update: upstream stable patchset 2023-05-23 (LP: #2020599) - wifi: cfg80211: Partial revert "wifi: cfg80211: Fix use after free for wext" linux (5.19.0-44.45) kinetic; urgency=medium * kinetic/linux: 5.19.0-44.45 -proposed tracker (LP: #2019827) * Linux 5.19 amdgpu: NULL pointer on GCN2 and invalid load on GCN1 (LP: #2018470) - drm/amdgpu: Fix for BO move issue * CVE-2023-32233 - netfilter: nf_tables: deactivate anonymous set from preparation phase * CVE-2023-2612 - SAUCE: shiftfs: prevent lock unbalance in shiftfs_create_object() * CVE-2023-31436 - net: sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg * CVE-2023-1380 - wifi: brcmfmac: slab-out-of-bounds read in brcmf_get_assoc_ies() * conntrack mark is not advertised via netlink (LP: #2016269) - netfilter: ctnetlink: revert to dumping mark regardless of event type * 5.19 not reporting cgroups v1 blkio.throttle.io_serviced (LP: #2016186) - SAUCE: blk-throttle: Fix io statistics for cgroup v1 * [SRU] Backport request for hpwdt from upstream 6.1 to Jammy (LP: #2008751) - watchdog/hpwdt: Enable HP_WATCHDOG for ARM64 systems. - watchdog/hpwdt: Include nmi.h only if CONFIG_HPWDT_NMI_DECODING - [Config] Add arm64 option to CONFIG_HP_WATCHDOG * vmwgfx fails to reserve graphics buffer on aarch64 leading to blank display (LP: #2007001) - SAUCE: Revert "video/aperture: Disable and unregister sysfb devices via aperture helpers" * Ubuntu 22.04 raise abnormal NIC MSI-X requests with larger CPU cores (256) (LP: #2012335) - ice: Allow operation with reduced device MSI-X * Dell: Enable speaker mute hotkey LED indicator (LP: #2015972) - platform/x86: dell-laptop: Register ctl-led for speaker-mute * [SRU]With "Performance per Watt (DAPC)" enabled in the BIOS, Bootup time is taking longer than expected (LP: #2008527) - cpufreq: ACPI: Defer setting boost MSRs * [SRU][Jammy] CONFIG_PCI_MESON is not enabled (LP: #2007745) - [Config] arm64: Enable PCI_MESON module * Kinetic update: upstream stable patchset 2023-05-08 (LP: #2018948) - HID: asus: use spinlock to protect concurrent accesses - HID: asus: use spinlock to safely schedule workers - powerpc/mm: Rearrange if-else block to avoid clang warning - ARM: OMAP2+: Fix memory leak in realtime_counter_init() - arm64: dts: qcom: qcs404: use symbol names for PCIe resets - arm64: dts: qcom: msm8996-tone: Fix USB taking 6 minutes to wake up - arm64: dts: qcom: sm8150-kumano: Panel framebuffer is 2.5k instead of 4k - arm64: dts: qcom: sm6125: Reorder HSUSB PHY clocks to match bindings - arm64: dts: imx8m: Align SoC unique ID node unit address - ARM: zynq: Fix refcount leak in zynq_early_slcr_init - arm64: dts: mediatek: mt8183: Fix systimer 13 MHz clock description - arm64: dts: qcom: sdm845-db845c: fix audio codec interrupt pin name - arm64: dts: qcom: sc7180: correct SPMI bus address cells - arm64: dts: qcom: sc7280: correct SPMI bus address cells - arm64: dts: meson-gx: Fix Ethernet MAC address unit name - arm64: dts: meson-g12a: Fix internal Ethernet PHY unit name - arm64: dts: meson-gx: Fix the SCPI DVFS node name and unit address - arm64: dts: msm8992-bullhead: add memory hole region - arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem size - arm64: dts: qcom: msm8992-bullhead: Disable dfps_data_mem - arm64: dts: qcom: ipq8074: correct USB3 QMP PHY-s clock output names - arm64: dts: qcom: ipq8074: fix Gen3 PCIe QMP PHY - arm64: dts: qcom: ipq8074: correct Gen2 PCIe ranges - arm64: dts: qcom: ipq8074: fix Gen3 PCIe node - arm64: dts: qcom: ipq8074: correct PCIe QMP PHY output clock names - arm64: dts: meson: remove CPU opps below 1GHz for G12A boards - ARM: OMAP1: call platform_device_put() in error case in omap1_dm_timer_init() - ARM: bcm2835_defconfig: Enable the framebuffer - ARM: s3c: fix s3c64xx_set_timer_source prototype - arm64: dts: ti: k3-j7200: Fix wakeup pinmux range - ARM: dts: exynos: correct wr-active property in Exynos3250 Rinato - ARM: imx: Call ida_simple_remove() for ida_simple_get - arm64: dts: amlogic: meson-gx: fix SCPI clock dvfs node name - arm64: dts: amlogic: meson-axg: fix SCPI clock dvfs node name - arm64: dts: amlogic: meson-gx: add missing SCPI sensors compatible - arm64: dts: amlogic: meson-gxl-s905d-sml5442tw: drop invalid clock-names property - arm64: dts: amlogic: meson-gx: add missing unit address to rng node name - arm64: dts: amlogic: meson-gxl: add missing unit address to eth-phy-mux node name - arm64: dts: amlogic: meson-gx-libretech-pc: fix update button name - arm64: dts:
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug was fixed in the package linux - 5.15.0-75.82 --- linux (5.15.0-75.82) jammy; urgency=medium * jammy/linux: 5.15.0-75.82 -proposed tracker (LP: #2023065) * Jammy update: v5.15.102 upstream stable release (LP: #2020393) - wifi: cfg80211: Partial revert "wifi: cfg80211: Fix use after free for wext" * Packaging resync (LP: #1786013) - [Packaging] resync git-ubuntu-log - [Packaging] resync getabis * fix typo in config-checks invocation (LP: #2020413) - [Packaging] fix typo when calling the old config-check - [Packaging] fix typo in 4-checks.mk * support python < 3.9 with annotations (LP: #2020531) - [Packaging] kconfig/annotations.py: support older way of merging dicts linux (5.15.0-74.81) jammy; urgency=medium * jammy/linux: 5.15.0-74.81 -proposed tracker (LP: #2019420) * smartpqi: Update 22.04 driver to include recent bug fixes and support current generation devices (LP: #1998643) - scsi: smartpqi: Switch to attribute groups - scsi: smartpqi: Fix rmmod stack trace - scsi: smartpqi: Add PCI IDs - scsi: smartpqi: Enable SATA NCQ priority in sysfs - scsi: smartpqi: Eliminate drive spin down on warm boot - scsi: smartpqi: Quickly propagate path failures to SCSI midlayer - scsi: smartpqi: Fix a name typo and cleanup code - scsi: smartpqi: Fix a typo in func pqi_aio_submit_io() - scsi: smartpqi: Resolve delay issue with PQI_HZ value - scsi: smartpqi: Avoid drive spin-down during suspend - scsi: smartpqi: Update volume size after expansion - scsi: smartpqi: Speed up RAID 10 sequential reads - scsi: smartpqi: Expose SAS address for SATA drives - scsi: smartpqi: Fix NUMA node not updated during init - scsi: smartpqi: Fix BUILD_BUG_ON() statements - scsi: smartpqi: Fix hibernate and suspend - scsi: smartpqi: Fix lsscsi -t SAS addresses - scsi: smartpqi: Update version to 2.1.14-035 - scsi: smartpqi: Fix unused variable pqi_pm_ops for clang - scsi: smartpqi: Stop using the SCSI pointer - scsi: smartpqi: Fix typo in comment - scsi: smartpqi: Shorten drive visibility after removal - scsi: smartpqi: Add controller fw version to console log - scsi: smartpqi: Add PCI IDs for ramaxel controllers - scsi: smartpqi: Close write read holes - scsi: smartpqi: Add driver support for multi-LUN devices - scsi: smartpqi: Fix PCI control linkdown system hang - scsi: smartpqi: Add PCI ID for Adaptec SmartHBA 2100-8i - scsi: smartpqi: Add PCI IDs for Lenovo controllers - scsi: smartpqi: Stop logging spurious PQI reset failures - scsi: smartpqi: Fix RAID map race condition - scsi: smartpqi: Add module param to disable managed ints - scsi: smartpqi: Update deleting a LUN via sysfs - scsi: smartpqi: Add ctrl ready timeout module parameter - scsi: smartpqi: Update copyright to current year - scsi: smartpqi: Update version to 2.1.18-045 - scsi: smartpqi: Convert to host_tagset - scsi: smartpqi: Add new controller PCI IDs - scsi: smartpqi: Correct max LUN number - scsi: smartpqi: Change sysfs raid_level attribute to N/A for controllers - scsi: smartpqi: Correct device removal for multi-actuator devices - scsi: smartpqi: Add controller cache flush during rmmod - scsi: smartpqi: Initialize feature section info - scsi: smartpqi: Change version to 2.1.20-035 * CVE-2023-32233 - netfilter: nf_tables: deactivate anonymous set from preparation phase * CVE-2023-2612 - SAUCE: shiftfs: prevent lock unbalance in shiftfs_create_object() * CVE-2023-31436 - net: sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg * CVE-2023-1380 - wifi: brcmfmac: slab-out-of-bounds read in brcmf_get_assoc_ies() * Add PPIN support for Intel EMR cpu (LP: #2019131) - x86/cpu: Merge Intel and AMD ppin_init() functions - x86/cpu: Add Xeon Emerald Rapids to list of CPUs that support PPIN * conntrack mark is not advertised via netlink (LP: #2016269) - netfilter: ctnetlink: revert to dumping mark regardless of event type * [SRU] Backport request for hpwdt from upstream 6.1 to Jammy (LP: #2008751) - watchdog/hpwdt: Enable HP_WATCHDOG for ARM64 systems. - watchdog/hpwdt: Include nmi.h only if CONFIG_HPWDT_NMI_DECODING - [Config] Add arm64 option to CONFIG_HP_WATCHDOG * Ubuntu 22.04 raise abnormal NIC MSI-X requests with larger CPU cores (256) (LP: #2012335) - ice: Allow operation with reduced device MSI-X * Dell: Enable speaker mute hotkey LED indicator (LP: #2015972) - platform/x86: dell-laptop: Register ctl-led for speaker-mute * [SRU]With "Performance per Watt (DAPC)" enabled in the BIOS, Bootup time is taking longer than expected (LP: #2008527) - cpufreq: ACPI: Defer setting boost MSRs * [SRU][Jammy] CONFIG_PCI_MESON is not enabled (LP: #2007745) - [Config] arm64: Enable PCI_MESON module * Jammy update: v5.15.99 upstream
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug is awaiting verification that the linux-intel- iotg-5.15/5.15.0-1033.38~20.04.1 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-focal' to 'verification-done-focal'. If the problem still exists, change the tag 'verification-needed-focal' to 'verification-failed-focal'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: kernel-spammed-focal-linux-intel-iotg-5.15 verification-needed-focal -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Invalid Status in linux source package in Jammy: Fix Committed Status in linux source package in Kinetic: Fix Committed Status in linux source package in Lunar: Fix Committed Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
Thank you @itrue for confirming its enabled. Marking verification done for both jammy and kinetic. ** Tags removed: verification-needed-jammy verification-needed-kinetic ** Tags added: verification-done-jammy verification-done-kinetic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Invalid Status in linux source package in Jammy: Fix Committed Status in linux source package in Kinetic: Fix Committed Status in linux source package in Lunar: Fix Committed Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug is awaiting verification that the linux- nvidia-6.2/6.2.0-1003.3~22.04.1 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-jammy' to 'verification-done-jammy'. If the problem still exists, change the tag 'verification-needed-jammy' to 'verification-failed-jammy'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: kernel-spammed-jammy-linux-nvidia-6.2 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Invalid Status in linux source package in Jammy: Fix Committed Status in linux source package in Kinetic: Fix Committed Status in linux source package in Lunar: Fix Committed Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug is awaiting verification that the linux- hwe-6.2/6.2.0-23.23~22.04.1 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-jammy' to 'verification-done-jammy'. If the problem still exists, change the tag 'verification-needed-jammy' to 'verification-failed-jammy'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: kernel-spammed-jammy-linux-hwe-6.2 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Invalid Status in linux source package in Jammy: Fix Committed Status in linux source package in Kinetic: Fix Committed Status in linux source package in Lunar: Fix Committed Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug is awaiting verification that the linux- nvidia-5.19/5.19.0-1014.14 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-jammy' to 'verification-done-jammy'. If the problem still exists, change the tag 'verification-needed-jammy' to 'verification-failed-jammy'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: kernel-spammed-jammy-linux-nvidia-5.19 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Invalid Status in linux source package in Jammy: Fix Committed Status in linux source package in Kinetic: Fix Committed Status in linux source package in Lunar: Fix Committed Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
Tested on 22.04: confirmed that pci-meson.ko is enabled and found in linux-modules-extra-5.15.0-74-generic $ find /lib/modules/ -name pci-meson.ko /lib/modules/5.15.0-74-generic/kernel/drivers/pci/controller/dwc/pci-meson.ko -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Invalid Status in linux source package in Jammy: Fix Committed Status in linux source package in Kinetic: Fix Committed Status in linux source package in Lunar: Fix Committed Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
Tested on 22.10: confirmed that pci-meson.ko is enabled and found in linux-modules-extra-5.19.0-44-generic $ find /lib/modules/ -name pci-meson.ko /lib/modules/5.19.0-44-generic/kernel/drivers/pci/controller/dwc/pci-meson.ko -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Invalid Status in linux source package in Jammy: Fix Committed Status in linux source package in Kinetic: Fix Committed Status in linux source package in Lunar: Fix Committed Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug is awaiting verification that the linux/5.19.0-44.45 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-kinetic' to 'verification-done-kinetic'. If the problem still exists, change the tag 'verification-needed-kinetic' to 'verification-failed-kinetic'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: kernel-spammed-kinetic-linux verification-needed-kinetic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Invalid Status in linux source package in Jammy: Fix Committed Status in linux source package in Kinetic: Fix Committed Status in linux source package in Lunar: Fix Committed Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
This bug is awaiting verification that the linux/5.15.0-74.81 kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-jammy' to 'verification-done-jammy'. If the problem still exists, change the tag 'verification-needed-jammy' to 'verification-failed-jammy'. If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you! ** Tags added: kernel-spammed-jammy-linux verification-needed-jammy -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Invalid Status in linux source package in Jammy: Fix Committed Status in linux source package in Kinetic: Fix Committed Status in linux source package in Lunar: Fix Committed Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
** Also affects: linux (Ubuntu Lunar) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Jammy) Importance: Undecided Status: New ** Also affects: linux (Ubuntu Kinetic) Importance: Undecided Status: New ** Changed in: linux (Ubuntu Jammy) Status: New => Fix Committed ** Changed in: linux (Ubuntu Kinetic) Status: New => Fix Committed ** Changed in: linux (Ubuntu Lunar) Status: New => Fix Committed ** Changed in: linux (Ubuntu) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Invalid Status in linux source package in Jammy: Fix Committed Status in linux source package in Kinetic: Fix Committed Status in linux source package in Lunar: Fix Committed Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2007745] Re: [SRU][Jammy] CONFIG_PCI_MESON is not enabled
** Summary changed: - [SRU] CONFIG_PCI_MESON is not enabled + [SRU][Jammy] CONFIG_PCI_MESON is not enabled -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2007745 Title: [SRU][Jammy] CONFIG_PCI_MESON is not enabled Status in linux package in Ubuntu: Confirmed Bug description: SRU justification: [ Impact ] The PCI driver for the amlogic-based Meson platforms (CONFIG_PCI_MESON) is not enabled as a module in the kernel configuration: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/focal/tree/debian.master/config/config.common.ubuntu?h=master#n7036 [ Test Plan ] Check if pci_meson.ko is compiled and present in the linux-modules package. [ Where problems could occur ] * Enabling the driver could enable undesired dependencies * Kernel module does not compile and breaks the build [ Other Info ] This driver is important for systems like the ODROID HC4, which uses a PCIE-SATA bridge to provide a storage interface. This system is fully supported by the kernel (including a device tree), except for the fact that this PCI driver is disabled. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2007745/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp