[Kernel-packages] [Bug 1709123] Re: [SRU][Zesty] [QDF2400] pl011 E44 erratum patch needed for 2.0 firmware and 1.1 silicon

[Launchpad Bug Tracker]

This bug was fixed in the package linux - 4.10.0-35.39

---
linux (4.10.0-35.39) zesty; urgency=low

  * linux: 4.10.0-35.39 -proposed tracker (LP: #1716606)

  * kernel panic -not syncing: Fatal exception: panic_on_oops (LP: #1708399)
- SAUCE: s390/mm: fix local TLB flushing vs. detach of an mm address space
- SAUCE: s390/mm: fix race on mm->context.flush_mm

  * CVE-2017-1000251
- Bluetooth: Properly check L2CAP config option output buffer length

linux (4.10.0-34.38) zesty; urgency=low

  * linux: 4.10.0-34.38 -proposed tracker (LP: #1713470)

  * Ubuntu 16.04.03: perf tool does not count pm_run_inst_cmpl with rcode on
POWER9 DD2.0 (LP: #1709964)
- powerpc/perf: Fix Power9 test_adder fields

  * HID: multitouch: Support ALPS PTP Stick and Touchpad devices (LP: #1712481)
- HID: multitouch: Support PTP Stick and Touchpad device
- SAUCE: HID: multitouch: Support ALPS PTP stick with pid 0x120A

  * igb: Support using Broadcom 54616 as PHY (LP: #1712024)
- SAUCE: igb: add support for using Broadcom 54616 as PHY

  * RPT related fixes missing in Ubuntu 16.04.3 (LP: #1709220)
- powerpc/mm/radix: Optimise tlbiel flush all case
- powerpc/mm/radix: Improve _tlbiel_pid to be usable for PWC flushes
- powerpc/mm/radix: Improve TLB/PWC flushes
- powerpc/mm/radix: Avoid flushing the PWC on every flush_tlb_range

  * AMD RV platforms with SNPS 3.1 USB controller stop responding (S3 issue)
(LP: #1711098)
- usb: xhci: Issue stop EP command only when the EP state is running

  * dma-buf: performance issue when looking up the fence status (LP: #1711096)
- dma-buf: avoid scheduling on fence status query v2

  * IPR driver causes multipath to fail paths/stuck IO on Medium Errors
(LP: #1682644)
- scsi: ipr: do not set DID_PASSTHROUGH on CHECK CONDITION

  * Disable CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE (LP: #1709171)
- [Config] CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=n for ppc64el

  * memory-hotplug test needs to be fixed (LP: #1710868)
- selftests: typo correction for memory-hotplug test
- selftests: check hot-pluggagble memory for memory-hotplug test
- selftests: check percentage range for memory-hotplug test
- selftests: add missing test name in memory-hotplug test
- selftests: fix memory-hotplug test

  * Ubuntu 16.04.3: Qemu fails on P9 (LP: #1686019)
- KVM: PPC: Pass kvm* to kvmppc_find_table()
- KVM: PPC: Use preregistered memory API to access TCE list
- KVM: PPC: VFIO: Add in-kernel acceleration for VFIO
- powerpc/powernv/iommu: Add real mode version of 
iommu_table_ops::exchange()
- powerpc/powernv/ioda2: Update iommu table base on ownership change
- powerpc/iommu/vfio_spapr_tce: Cleanup iommu_table disposal
- powerpc/vfio_spapr_tce: Add reference counting to iommu_table
- powerpc/mmu: Add real mode support for IOMMU preregistered memory
- KVM: PPC: Reserve KVM_CAP_SPAPR_TCE_VFIO capability number
- KVM: PPC: Book3S HV: Add radix checks in real-mode hypercall handlers

  * [SRU][Zesty] [QDF2400] pl011 E44 erratum patch needed for 2.0 firmware and
1.1 silicon (LP: #1709123)
- tty: pl011: fix initialization order of QDF2400 E44

  * Docker hangs with xfs using aufs storage driver (LP: #1709749)
- SAUCE: aufs: for v4.5, use vfs_clone_file_range() in copy-up
- SAUCE: aufs: bugfix, for v4.10, copy-up on XFS branch

  * ACPI ID for Hip07/08 I2C controller has typo (LP: #1711182)
- ACPI: APD: Fix HID for Hisilicon Hip07/08

  * Avoid spurious PMU interrupts after idle (LP: #1709352)
- powerpc/perf: Avoid spurious PMU interrupts after idle

  * [SRU][ZESTY]kernel BUG at
/build/linux-H5UzH8/linux-4.10.0/drivers/nvme/host/pci.c:567! (LP: #1709073)
- block: fix bio_will_gap() for first bvec with offset

  * CVE-2017-7541
- brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx()

  * sort ABI files with C.UTF-8 locale (LP: #1712345)
- [Packaging] sort ABI files with C.UTF-8 locale

  * Please only recommend or suggest initramfs-tools | linux-initramfs-tool for
kernels able to boot without initramfs (LP: #1700972)
- [Debian] Don't depend on initramfs-tools

 -- Juerg Haefliger   Wed, 13 Sep 2017
08:15:17 +0200

** Changed in: linux (Ubuntu Zesty)
   Status: Fix Committed => Fix Released

** CVE added: https://cve.mitre.org/cgi-
bin/cvename.cgi?name=2017-1000251

** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2017-7541

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1709123

Title:
  [SRU][Zesty] [QDF2400] pl011 E44 erratum patch needed for 2.0 firmware
  and 1.1 silicon

Status in linux package in Ubuntu:
  Fix Released
Status in linux source package in Zesty:
  Fix Released

Bug description:
  [Impact]
  Another bug was found in the pl011/spcr code that implements the 

[Kernel-packages] [Bug 1709123] Re: [SRU][Zesty] [QDF2400] pl011 E44 erratum patch needed for 2.0 firmware and 1.1 silicon

[Jeffrey Hugo]

Validated

** Tags removed: verification-needed-zesty
** Tags added: verification-done-zesty

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1709123

Title:
  [SRU][Zesty] [QDF2400] pl011 E44 erratum patch needed for 2.0 firmware
  and 1.1 silicon

Status in linux package in Ubuntu:
  Fix Released
Status in linux source package in Zesty:
  Fix Committed

Bug description:
  [Impact]
  Another bug was found in the pl011/spcr code that implements the work-around 
for erratum E44. This erratum affects QDF2400 v1.1 silicon. The software bug is 
only exposed when using Firmware 2.0 or later (estimated release October 2017).

  To ensure compatibility with future firmware, the Ubuntu kernel should
  apply the aforementioned patch. Without this patch, customers using
  the 2.0 firmware and 1.1 silicon might not have a functional UART
  console, either sometimes or always.

  It is expected that this problem does not occur with 2.0 or later
  silicon.

  [Test Case]
  Upgrade firmware to v2.0 on a QDF2400 server with 1.1 silicon, and the kernel 
should fail to boot, with the patch applied, we should see no boot failure.

  [Fix]
  Following patch in linux-next fixes this issue:
  37ef38f3f838 tty: pl011: fix initialization order of QDF2400 E44

  [Regression Potential]
  This is a bug fix to tty driver and limited to qdf2400. Low risk.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709123/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1709123] Re: [SRU][Zesty] [QDF2400] pl011 E44 erratum patch needed for 2.0 firmware and 1.1 silicon

[Kleber Sacilotto de Souza]

Hi Manoj,

Could you please verify the fix with the latest zesty kernel in
-proposed?

Thanks.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1709123

Title:
  [SRU][Zesty] [QDF2400] pl011 E44 erratum patch needed for 2.0 firmware
  and 1.1 silicon

Status in linux package in Ubuntu:
  Fix Released
Status in linux source package in Zesty:
  Fix Committed

Bug description:
  [Impact]
  Another bug was found in the pl011/spcr code that implements the work-around 
for erratum E44. This erratum affects QDF2400 v1.1 silicon. The software bug is 
only exposed when using Firmware 2.0 or later (estimated release October 2017).

  To ensure compatibility with future firmware, the Ubuntu kernel should
  apply the aforementioned patch. Without this patch, customers using
  the 2.0 firmware and 1.1 silicon might not have a functional UART
  console, either sometimes or always.

  It is expected that this problem does not occur with 2.0 or later
  silicon.

  [Test Case]
  Upgrade firmware to v2.0 on a QDF2400 server with 1.1 silicon, and the kernel 
should fail to boot, with the patch applied, we should see no boot failure.

  [Fix]
  Following patch in linux-next fixes this issue:
  37ef38f3f838 tty: pl011: fix initialization order of QDF2400 E44

  [Regression Potential]
  This is a bug fix to tty driver and limited to qdf2400. Low risk.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709123/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1709123] Re: [SRU][Zesty] [QDF2400] pl011 E44 erratum patch needed for 2.0 firmware and 1.1 silicon

[Launchpad Bug Tracker]

This bug was fixed in the package linux - 4.12.0-12.13

---
linux (4.12.0-12.13) artful; urgency=low

  * Artful update to v4.12.8 stable release (LP: #1711368)
- mm: ratelimit PFNs busy info message
- mm: fix list corruptions on shmem shrinklist
- futex: Remove unnecessary warning from get_futex_key
- xtensa: fix cache aliasing handling code for WT cache
- xtensa: mm/cache: add missing EXPORT_SYMBOLs
- xtensa: don't limit csum_partial export by CONFIG_NET
- xfs: Fix leak of discard bio
- pinctrl: armada-37xx: Fix number of pin in south bridge
- mtd: nand: atmel: Fix DT backward compatibility in pmecc.c
- mtd: nand: Fix timing setup for NANDs that do not support SET FEATURES
- mtd: nand: Declare tBERS, tR and tPROG as u64 to avoid integer overflow
- iscsi-target: fix memory leak in iscsit_setup_text_cmd()
- iscsi-target: Fix iscsi_np reset hung task during parallel delete
- usb-storage: fix deadlock involving host lock and scsi_done
- target: Fix node_acl demo-mode + uncached dynamic shutdown regression
- fuse: initialize the flock flag in fuse_file on allocation
- i2c: designware: Some broken DSTDs use 1MiHz instead of 1MHz
- nand: fix wrong default oob layout for small pages using soft ecc
- mmc: mmc: correct the logic for setting HS400ES signal voltage
- nfs/flexfiles: fix leak of nfs4_ff_ds_version arrays
- drm/bridge: tc358767: fix probe without attached output node
- drm/etnaviv: Fix off-by-one error in reloc checking
- drm/i915: Fix out-of-bounds array access in bdw_load_gamma_lut
- USB: serial: option: add D-Link DWM-222 device ID
- USB: serial: cp210x: add support for Qivicon USB ZigBee dongle
- USB: serial: pl2303: add new ATEN device id
- usb: musb: fix tx fifo flush handling again
- USB: hcd: Mark secondary HCD as dead if the primary one died
- staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read
- iio: aspeed-adc: wait for initial sequence.
- iio: accel: st_accel: add SPI-3wire support
- iio: accel: bmc150: Always restore device to normal mode after suspend-
  resume
- iio: pressure: st_pressure_core: disable multiread by default for LPS22HB
- iio: light: tsl2563: use correct event code
- iio: adc: Revert "axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register
  modifications"
- staging: comedi: comedi_fops: do not call blocking ops when !TASK_RUNNING
- uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069
- firmware: fix batched requests - wake all waiters
- firmware: fix batched requests - send wake up on failure on direct lookups
- firmware: avoid invalid fallback aborts by using killable wait
- block: Make blk_mq_delay_kick_requeue_list() rerun the queue at a quiet 
time
- usb: gadget: udc: renesas_usb3: Fix usb_gadget_giveback_request() calling
- usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3
- USB: Check for dropped connection before switching to full speed
- usb: core: unlink urbs from the tail of the endpoint's urb_list
- usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter
- usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume
- PCI: Protect pci_error_handlers->reset_notify() usage with device_lock()
- PCI: Remove __pci_dev_reset() and pci_dev_reset()
- PCI: Add pci_reset_function_locked()
- xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue
- iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits
- pnfs/blocklayout: require 64-bit sector_t
- pinctrl: cherryview: Add Setzer models to the Chromebook DMI quirk
- pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver
- pinctrl: intel: merrifield: Correct UART pin lists
- pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
- pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20
- pinctrl: samsung: Remove bogus irq_[un]mask from resource management
- pinctrl: meson-gxbb: Add missing GPIODV_18 pin entry
- pinctrl: meson-gxl: Add missing GPIODV_18 pin entry
- MIPS: DEC: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression
- Revert "MIPS: Don't unnecessarily include kmalloc.h into ."
- MIPS: Octeon: Fix broken EDAC driver.
- Linux 4.12.8

  * Artful: 4.12.0-11.12: Boot panic in vlv2_plat_configure_clock+0x3b/0xa0
(LP: #1711298)
- [Config] CONFIG_INTEL_ATOMISP=n

  * ACPI ID for Hip07/08 I2C controller has typo (LP: #1711182)
- ACPI: APD: Fix HID for Hisilicon Hip07/08

  * Ubuntu17.10 - perf: Update Power9 PMU event JSON files (LP: #1708630)
- perf pmu-events: Support additional POWER8+ PVR in mapfile
- perf vendor events: Add POWER9 PMU events
- perf vendor events: Add POWER9 PVRs to mapfile
- SAUCE: perf vendor events powerpc: remove suffix in mapfile
- SAUCE: perf vendor events powerpc: Update POWER9 events

  * Disable 

[Kernel-packages] [Bug 1709123] Re: [SRU][Zesty] [QDF2400] pl011 E44 erratum patch needed for 2.0 firmware and 1.1 silicon

[Kleber Sacilotto de Souza]

This bug is awaiting verification that the kernel in -proposed solves
the problem. Please test the kernel and update this bug with the
results. If the problem is solved, change the tag 'verification-needed-
zesty' to 'verification-done-zesty'. If the problem still exists, change
the tag 'verification-needed-zesty' to 'verification-failed-zesty'.

If verification is not done by 5 working days from today, this fix will
be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how
to enable and use -proposed. Thank you!


** Tags added: verification-needed-zesty

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1709123

Title:
  [SRU][Zesty] [QDF2400] pl011 E44 erratum patch needed for 2.0 firmware
  and 1.1 silicon

Status in linux package in Ubuntu:
  Fix Committed
Status in linux source package in Zesty:
  Fix Committed

Bug description:
  [Impact]
  Another bug was found in the pl011/spcr code that implements the work-around 
for erratum E44. This erratum affects QDF2400 v1.1 silicon. The software bug is 
only exposed when using Firmware 2.0 or later (estimated release October 2017).

  To ensure compatibility with future firmware, the Ubuntu kernel should
  apply the aforementioned patch. Without this patch, customers using
  the 2.0 firmware and 1.1 silicon might not have a functional UART
  console, either sometimes or always.

  It is expected that this problem does not occur with 2.0 or later
  silicon.

  [Test Case]
  Upgrade firmware to v2.0 on a QDF2400 server with 1.1 silicon, and the kernel 
should fail to boot, with the patch applied, we should see no boot failure.

  [Fix]
  Following patch in linux-next fixes this issue:
  37ef38f3f838 tty: pl011: fix initialization order of QDF2400 E44

  [Regression Potential]
  This is a bug fix to tty driver and limited to qdf2400. Low risk.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709123/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1709123] Re: [SRU][Zesty] [QDF2400] pl011 E44 erratum patch needed for 2.0 firmware and 1.1 silicon

[Kleber Sacilotto de Souza]

** Changed in: linux (Ubuntu Zesty)
   Status: New => Fix Committed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1709123

Title:
  [SRU][Zesty] [QDF2400] pl011 E44 erratum patch needed for 2.0 firmware
  and 1.1 silicon

Status in linux package in Ubuntu:
  Fix Committed
Status in linux source package in Zesty:
  Fix Committed

Bug description:
  [Impact]
  Another bug was found in the pl011/spcr code that implements the work-around 
for erratum E44. This erratum affects QDF2400 v1.1 silicon. The software bug is 
only exposed when using Firmware 2.0 or later (estimated release October 2017).

  To ensure compatibility with future firmware, the Ubuntu kernel should
  apply the aforementioned patch. Without this patch, customers using
  the 2.0 firmware and 1.1 silicon might not have a functional UART
  console, either sometimes or always.

  It is expected that this problem does not occur with 2.0 or later
  silicon.

  [Test Case]
  Upgrade firmware to v2.0 on a QDF2400 server with 1.1 silicon, and the kernel 
should fail to boot, with the patch applied, we should see no boot failure.

  [Fix]
  Following patch in linux-next fixes this issue:
  37ef38f3f838 tty: pl011: fix initialization order of QDF2400 E44

  [Regression Potential]
  This is a bug fix to tty driver and limited to qdf2400. Low risk.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709123/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1709123] Re: [SRU][Zesty] [QDF2400] pl011 E44 erratum patch needed for 2.0 firmware and 1.1 silicon

[Seth Forshee]

** Also affects: linux (Ubuntu Zesty)
   Importance: Undecided
   Status: New

** Changed in: linux (Ubuntu)
   Status: Triaged => Fix Committed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1709123

Title:
  [SRU][Zesty] [QDF2400] pl011 E44 erratum patch needed for 2.0 firmware
  and 1.1 silicon

Status in linux package in Ubuntu:
  Fix Committed
Status in linux source package in Zesty:
  New

Bug description:
  [Impact]
  Another bug was found in the pl011/spcr code that implements the work-around 
for erratum E44. This erratum affects QDF2400 v1.1 silicon. The software bug is 
only exposed when using Firmware 2.0 or later (estimated release October 2017).

  To ensure compatibility with future firmware, the Ubuntu kernel should
  apply the aforementioned patch. Without this patch, customers using
  the 2.0 firmware and 1.1 silicon might not have a functional UART
  console, either sometimes or always.

  It is expected that this problem does not occur with 2.0 or later
  silicon.

  [Test Case]
  Upgrade firmware to v2.0 on a QDF2400 server with 1.1 silicon, and the kernel 
should fail to boot, with the patch applied, we should see no boot failure.

  [Fix]
  Following patch in linux-next fixes this issue:
  37ef38f3f838 tty: pl011: fix initialization order of QDF2400 E44

  [Regression Potential]
  This is a bug fix to tty driver and limited to qdf2400. Low risk.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709123/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

[Kernel-packages] [Bug 1709123] Re: [SRU][Zesty] [QDF2400] pl011 E44 erratum patch needed for 2.0 firmware and 1.1 silicon

[Manoj Iyer]

SRU submitted.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1709123

Title:
  [SRU][Zesty] [QDF2400] pl011 E44 erratum patch needed for 2.0 firmware
  and 1.1 silicon

Status in linux package in Ubuntu:
  Triaged

Bug description:
  [Impact]
  Another bug was found in the pl011/spcr code that implements the work-around 
for erratum E44. This erratum affects QDF2400 v1.1 silicon. The software bug is 
only exposed when using Firmware 2.0 or later (estimated release October 2017).

  To ensure compatibility with future firmware, the Ubuntu kernel should
  apply the aforementioned patch. Without this patch, customers using
  the 2.0 firmware and 1.1 silicon might not have a functional UART
  console, either sometimes or always.

  It is expected that this problem does not occur with 2.0 or later
  silicon.

  [Test Case]
  Upgrade firmware to v2.0 on a QDF2400 server with 1.1 silicon, and the kernel 
should fail to boot, with the patch applied, we should see no boot failure.

  [Fix]
  Following patch in linux-next fixes this issue:
  37ef38f3f838 tty: pl011: fix initialization order of QDF2400 E44

  [Regression Potential]
  This is a bug fix to tty driver and limited to qdf2400. Low risk.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1709123/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp