Re: [Kicad-developers] 5.1.5 release tag

2019-11-27 Thread Wayne Stambaugh 
Hi Nick,

Thanks, I'm not planning on making any changes to the release
announcement so feel free to undraft it as is.  Are you going to be able
to complete this today?  I was also planning on making announcements on
some other platforms (Launcpad, User Forum, Twitter, etc.) as well so
please ping me when you undraft the release announcement.

Cheers,

Wayne

On 11/27/19 5:24 AM, Nick Østergaard wrote:
> I just need to make sure they are mirrored to the github tags, so please
> make it a pr and not mere it before the ci is green if you intend to
> make the website change. But I will undraft it when everything is good,
> so if you feed the need to add more info to the announcement please do
> so as a draft.
> 
> tir. 26. nov. 2019 20.37 skrev Wayne Stambaugh  >:
> 
> Perfect.  Thanks Adam!
> 
> On 11/26/19 2:30 PM, Adam Wolf wrote:
> > Not that I see. The macOS builds are uploading to S3 right now, should
> > be finished within a few minutes.
> >
> > Adam
> >
> > On Tue, Nov 26, 2019 at 1:15 PM Wayne Stambaugh
> mailto:[email protected]>> wrote:
> >>
> >> Is there any reason for me to postpone the release announcement I was
> >> planning for tomorrow?  It doesn't sound like it.
> >>
> >> On 11/25/19 9:02 PM, Adam Wolf wrote:
> >>> Andy, thank you so much for this.  I normally run through the
> releases
> >>> but I am quite behind on some work and you definitely prevented the
> >>> macOS release from holding everything up :)
> >>>
> >>> I'll trigger builds tonight--there already is a deep queue for
> >>> nightlies, and in the morning I'll upload them to downloads and let
> >>> Wayne know so we can announce.  Thanks everyone!
> >>>
> >>> Adam
> >>>
> >>> On Mon, Nov 25, 2019 at 7:05 PM Nick Østergaard
> mailto:[email protected]>
> >>> >> wrote:
> >>>
> >>>     That is not a but, it is the autoplace fields feature.
> >>>
> >>>     On Tue, 26 Nov 2019 at 01:58, Andy Peters  
> >>>     >> wrote:
> >>>
> >>>
>          On Nov 25, 2019, at 5:31 PM, Ian McInerney
>             >>
>          wrote:
> 
>          Andy, thank you for the feedback. None of these sound like
>          release stoppers though. Please file a bug report for the
>          first one, and the second one has been reported
>          already (https://bugs.launchpad.net/kicad/+bug/1850632).
> >>>
> >>>         Will do.
> >>>
> >>>         One more.
> >>>
> >>>         I’ve created a symbol in the Symbol Editor. In the
> editor, the
> >>>         Reference Designator is placed just above the top of the
> symbol
> >>>         and the Value (component name) is placed just below the
> bottom
> >>>         of the symbol. See screenshot:
> >>>
> >>>
> >>>
> >>>         But when the part is placed on the schematic, the reference
> >>>         designator is moved up to make room for the value field:
> >>>         I can’t figure out why it’s doing this.
> >>>
> >>>         ___
> >>>         Mailing list: https://launchpad.net/~kicad-developers
> >>>         Post to     : [email protected]
> 
> >>>          >
> >>>         Unsubscribe : https://launchpad.net/~kicad-developers
> >>>         More help   : https://help.launchpad.net/ListHelp
> >>>
> >>>     ___
> >>>     Mailing list: https://launchpad.net/~kicad-developers
> >>>     Post to     : [email protected]
> 
> >>>      >
> >>>     Unsubscribe : https://launchpad.net/~kicad-developers
> >>>     More help   : https://help.launchpad.net/ListHelp
> >>>
> >>>
> >>> ___
> >>> Mailing list: https://launchpad.net/~kicad-developers
> >>> Post to     : [email protected]
> 
> >>> Unsubscribe : https://launchpad.net/~kicad-developers
> >>> More help   : https://help.launchpad.net/ListHelp
> >>>
> >>
> >> ___
> >> Mailing list: https://launchpad.net/~kicad-developers
> >> Post to     : [email protected]

Re: [Kicad-developers] 5.1.5 release tag

2019-11-27 Thread Nick Østergaard 
Yes, late tonight in my timezone, tonight not that late in your timezone :)

ons. 27. nov. 2019 15.17 skrev Wayne Stambaugh :

> Hi Nick,
>
> Thanks, I'm not planning on making any changes to the release
> announcement so feel free to undraft it as is.  Are you going to be able
> to complete this today?  I was also planning on making announcements on
> some other platforms (Launcpad, User Forum, Twitter, etc.) as well so
> please ping me when you undraft the release announcement.
>
> Cheers,
>
> Wayne
>
> On 11/27/19 5:24 AM, Nick Østergaard wrote:
> > I just need to make sure they are mirrored to the github tags, so please
> > make it a pr and not mere it before the ci is green if you intend to
> > make the website change. But I will undraft it when everything is good,
> > so if you feed the need to add more info to the announcement please do
> > so as a draft.
> >
> > tir. 26. nov. 2019 20.37 skrev Wayne Stambaugh  > >:
> >
> > Perfect.  Thanks Adam!
> >
> > On 11/26/19 2:30 PM, Adam Wolf wrote:
> > > Not that I see. The macOS builds are uploading to S3 right now,
> should
> > > be finished within a few minutes.
> > >
> > > Adam
> > >
> > > On Tue, Nov 26, 2019 at 1:15 PM Wayne Stambaugh
> > mailto:[email protected]>> wrote:
> > >>
> > >> Is there any reason for me to postpone the release announcement I
> was
> > >> planning for tomorrow?  It doesn't sound like it.
> > >>
> > >> On 11/25/19 9:02 PM, Adam Wolf wrote:
> > >>> Andy, thank you so much for this.  I normally run through the
> > releases
> > >>> but I am quite behind on some work and you definitely prevented
> the
> > >>> macOS release from holding everything up :)
> > >>>
> > >>> I'll trigger builds tonight--there already is a deep queue for
> > >>> nightlies, and in the morning I'll upload them to downloads and
> let
> > >>> Wayne know so we can announce.  Thanks everyone!
> > >>>
> > >>> Adam
> > >>>
> > >>> On Mon, Nov 25, 2019 at 7:05 PM Nick Østergaard
> > mailto:[email protected]>
> > >>> >> wrote:
> > >>>
> > >>> That is not a but, it is the autoplace fields feature.
> > >>>
> > >>> On Tue, 26 Nov 2019 at 01:58, Andy Peters  > 
> > >>> >> wrote:
> > >>>
> > >>>
> >  On Nov 25, 2019, at 5:31 PM, Ian McInerney
> >   >   > >>
> >  wrote:
> > 
> >  Andy, thank you for the feedback. None of these sound
> like
> >  release stoppers though. Please file a bug report for
> the
> >  first one, and the second one has been reported
> >  already (https://bugs.launchpad.net/kicad/+bug/1850632
> ).
> > >>>
> > >>> Will do.
> > >>>
> > >>> One more.
> > >>>
> > >>> I’ve created a symbol in the Symbol Editor. In the
> > editor, the
> > >>> Reference Designator is placed just above the top of the
> > symbol
> > >>> and the Value (component name) is placed just below the
> > bottom
> > >>> of the symbol. See screenshot:
> > >>>
> > >>>
> > >>>
> > >>> But when the part is placed on the schematic, the
> reference
> > >>> designator is moved up to make room for the value field:
> > >>> I can’t figure out why it’s doing this.
> > >>>
> > >>> ___
> > >>> Mailing list: https://launchpad.net/~kicad-developers
> > >>> Post to : [email protected]
> > 
> > >>>  > >
> > >>> Unsubscribe : https://launchpad.net/~kicad-developers
> > >>> More help   : https://help.launchpad.net/ListHelp
> > >>>
> > >>> ___
> > >>> Mailing list: https://launchpad.net/~kicad-developers
> > >>> Post to : [email protected]
> > 
> > >>>  > >
> > >>> Unsubscribe : https://launchpad.net/~kicad-developers
> > >>> More help   : https://help.launchpad.net/ListHelp
> > >>>
> > >>>
> > >>> ___
> > >>> Mailing list: https://launchpad.net/~kicad-developers
> > >>> Post to : [email protected]
> >

Re: [Kicad-developers] 5.1.5 release tag

2019-11-27 Thread Nick Østergaard 
I just need to make sure they are mirrored to the github tags, so please
make it a pr and not mere it before the ci is green if you intend to make
the website change. But I will undraft it when everything is good, so if
you feed the need to add more info to the announcement please do so as a
draft.

tir. 26. nov. 2019 20.37 skrev Wayne Stambaugh :

> Perfect.  Thanks Adam!
>
> On 11/26/19 2:30 PM, Adam Wolf wrote:
> > Not that I see. The macOS builds are uploading to S3 right now, should
> > be finished within a few minutes.
> >
> > Adam
> >
> > On Tue, Nov 26, 2019 at 1:15 PM Wayne Stambaugh 
> wrote:
> >>
> >> Is there any reason for me to postpone the release announcement I was
> >> planning for tomorrow?  It doesn't sound like it.
> >>
> >> On 11/25/19 9:02 PM, Adam Wolf wrote:
> >>> Andy, thank you so much for this.  I normally run through the releases
> >>> but I am quite behind on some work and you definitely prevented the
> >>> macOS release from holding everything up :)
> >>>
> >>> I'll trigger builds tonight--there already is a deep queue for
> >>> nightlies, and in the morning I'll upload them to downloads and let
> >>> Wayne know so we can announce.  Thanks everyone!
> >>>
> >>> Adam
> >>>
> >>> On Mon, Nov 25, 2019 at 7:05 PM Nick Østergaard  >>> > wrote:
> >>>
> >>> That is not a but, it is the autoplace fields feature.
> >>>
> >>> On Tue, 26 Nov 2019 at 01:58, Andy Peters  >>> > wrote:
> >>>
> >>>
>  On Nov 25, 2019, at 5:31 PM, Ian McInerney
>  mailto:[email protected]>>
>  wrote:
> 
>  Andy, thank you for the feedback. None of these sound like
>  release stoppers though. Please file a bug report for the
>  first one, and the second one has been reported
>  already (https://bugs.launchpad.net/kicad/+bug/1850632).
> >>>
> >>> Will do.
> >>>
> >>> One more.
> >>>
> >>> I’ve created a symbol in the Symbol Editor. In the editor, the
> >>> Reference Designator is placed just above the top of the symbol
> >>> and the Value (component name) is placed just below the bottom
> >>> of the symbol. See screenshot:
> >>>
> >>>
> >>>
> >>> But when the part is placed on the schematic, the reference
> >>> designator is moved up to make room for the value field:
> >>> I can’t figure out why it’s doing this.
> >>>
> >>> ___
> >>> Mailing list: https://launchpad.net/~kicad-developers
> >>> Post to : [email protected]
> >>> 
> >>> Unsubscribe : https://launchpad.net/~kicad-developers
> >>> More help   : https://help.launchpad.net/ListHelp
> >>>
> >>> ___
> >>> Mailing list: https://launchpad.net/~kicad-developers
> >>> Post to : [email protected]
> >>> 
> >>> Unsubscribe : https://launchpad.net/~kicad-developers
> >>> More help   : https://help.launchpad.net/ListHelp
> >>>
> >>>
> >>> ___
> >>> Mailing list: https://launchpad.net/~kicad-developers
> >>> Post to : [email protected]
> >>> Unsubscribe : https://launchpad.net/~kicad-developers
> >>> More help   : https://help.launchpad.net/ListHelp
> >>>
> >>
> >> ___
> >> Mailing list: https://launchpad.net/~kicad-developers
> >> Post to : [email protected]
> >> Unsubscribe : https://launchpad.net/~kicad-developers
> >> More help   : https://help.launchpad.net/ListHelp
>
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : [email protected]
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
>
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-26 Thread Wayne Stambaugh 
Perfect.  Thanks Adam!

On 11/26/19 2:30 PM, Adam Wolf wrote:
> Not that I see. The macOS builds are uploading to S3 right now, should
> be finished within a few minutes.
> 
> Adam
> 
> On Tue, Nov 26, 2019 at 1:15 PM Wayne Stambaugh  wrote:
>>
>> Is there any reason for me to postpone the release announcement I was
>> planning for tomorrow?  It doesn't sound like it.
>>
>> On 11/25/19 9:02 PM, Adam Wolf wrote:
>>> Andy, thank you so much for this.  I normally run through the releases
>>> but I am quite behind on some work and you definitely prevented the
>>> macOS release from holding everything up :)
>>>
>>> I'll trigger builds tonight--there already is a deep queue for
>>> nightlies, and in the morning I'll upload them to downloads and let
>>> Wayne know so we can announce.  Thanks everyone!
>>>
>>> Adam
>>>
>>> On Mon, Nov 25, 2019 at 7:05 PM Nick Østergaard >> > wrote:
>>>
>>> That is not a but, it is the autoplace fields feature.
>>>
>>> On Tue, 26 Nov 2019 at 01:58, Andy Peters >> > wrote:
>>>
>>>
 On Nov 25, 2019, at 5:31 PM, Ian McInerney
 mailto:[email protected]>>
 wrote:

 Andy, thank you for the feedback. None of these sound like
 release stoppers though. Please file a bug report for the
 first one, and the second one has been reported
 already (https://bugs.launchpad.net/kicad/+bug/1850632).
>>>
>>> Will do.
>>>
>>> One more.
>>>
>>> I’ve created a symbol in the Symbol Editor. In the editor, the
>>> Reference Designator is placed just above the top of the symbol
>>> and the Value (component name) is placed just below the bottom
>>> of the symbol. See screenshot:
>>>
>>>
>>>
>>> But when the part is placed on the schematic, the reference
>>> designator is moved up to make room for the value field:
>>> I can’t figure out why it’s doing this.
>>>
>>> ___
>>> Mailing list: https://launchpad.net/~kicad-developers
>>> Post to : [email protected]
>>> 
>>> Unsubscribe : https://launchpad.net/~kicad-developers
>>> More help   : https://help.launchpad.net/ListHelp
>>>
>>> ___
>>> Mailing list: https://launchpad.net/~kicad-developers
>>> Post to : [email protected]
>>> 
>>> Unsubscribe : https://launchpad.net/~kicad-developers
>>> More help   : https://help.launchpad.net/ListHelp
>>>
>>>
>>> ___
>>> Mailing list: https://launchpad.net/~kicad-developers
>>> Post to : [email protected]
>>> Unsubscribe : https://launchpad.net/~kicad-developers
>>> More help   : https://help.launchpad.net/ListHelp
>>>
>>
>> ___
>> Mailing list: https://launchpad.net/~kicad-developers
>> Post to : [email protected]
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> More help   : https://help.launchpad.net/ListHelp

___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-26 Thread Adam Wolf 
Not that I see. The macOS builds are uploading to S3 right now, should
be finished within a few minutes.

Adam

On Tue, Nov 26, 2019 at 1:15 PM Wayne Stambaugh  wrote:
>
> Is there any reason for me to postpone the release announcement I was
> planning for tomorrow?  It doesn't sound like it.
>
> On 11/25/19 9:02 PM, Adam Wolf wrote:
> > Andy, thank you so much for this.  I normally run through the releases
> > but I am quite behind on some work and you definitely prevented the
> > macOS release from holding everything up :)
> >
> > I'll trigger builds tonight--there already is a deep queue for
> > nightlies, and in the morning I'll upload them to downloads and let
> > Wayne know so we can announce.  Thanks everyone!
> >
> > Adam
> >
> > On Mon, Nov 25, 2019 at 7:05 PM Nick Østergaard  > > wrote:
> >
> > That is not a but, it is the autoplace fields feature.
> >
> > On Tue, 26 Nov 2019 at 01:58, Andy Peters  > > wrote:
> >
> >
> >> On Nov 25, 2019, at 5:31 PM, Ian McInerney
> >> mailto:[email protected]>>
> >> wrote:
> >>
> >> Andy, thank you for the feedback. None of these sound like
> >> release stoppers though. Please file a bug report for the
> >> first one, and the second one has been reported
> >> already (https://bugs.launchpad.net/kicad/+bug/1850632).
> >
> > Will do.
> >
> > One more.
> >
> > I’ve created a symbol in the Symbol Editor. In the editor, the
> > Reference Designator is placed just above the top of the symbol
> > and the Value (component name) is placed just below the bottom
> > of the symbol. See screenshot:
> >
> >
> >
> > But when the part is placed on the schematic, the reference
> > designator is moved up to make room for the value field:
> > I can’t figure out why it’s doing this.
> >
> > ___
> > Mailing list: https://launchpad.net/~kicad-developers
> > Post to : [email protected]
> > 
> > Unsubscribe : https://launchpad.net/~kicad-developers
> > More help   : https://help.launchpad.net/ListHelp
> >
> > ___
> > Mailing list: https://launchpad.net/~kicad-developers
> > Post to : [email protected]
> > 
> > Unsubscribe : https://launchpad.net/~kicad-developers
> > More help   : https://help.launchpad.net/ListHelp
> >
> >
> > ___
> > Mailing list: https://launchpad.net/~kicad-developers
> > Post to : [email protected]
> > Unsubscribe : https://launchpad.net/~kicad-developers
> > More help   : https://help.launchpad.net/ListHelp
> >
>
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : [email protected]
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp

___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-26 Thread Wayne Stambaugh 
Is there any reason for me to postpone the release announcement I was
planning for tomorrow?  It doesn't sound like it.

On 11/25/19 9:02 PM, Adam Wolf wrote:
> Andy, thank you so much for this.  I normally run through the releases
> but I am quite behind on some work and you definitely prevented the
> macOS release from holding everything up :)
> 
> I'll trigger builds tonight--there already is a deep queue for
> nightlies, and in the morning I'll upload them to downloads and let
> Wayne know so we can announce.  Thanks everyone!
> 
> Adam
> 
> On Mon, Nov 25, 2019 at 7:05 PM Nick Østergaard  > wrote:
> 
> That is not a but, it is the autoplace fields feature.
> 
> On Tue, 26 Nov 2019 at 01:58, Andy Peters  > wrote:
> 
> 
>> On Nov 25, 2019, at 5:31 PM, Ian McInerney
>> mailto:[email protected]>>
>> wrote:
>>
>> Andy, thank you for the feedback. None of these sound like
>> release stoppers though. Please file a bug report for the
>> first one, and the second one has been reported
>> already (https://bugs.launchpad.net/kicad/+bug/1850632). 
> 
> Will do.
> 
> One more.
> 
> I’ve created a symbol in the Symbol Editor. In the editor, the
> Reference Designator is placed just above the top of the symbol
> and the Value (component name) is placed just below the bottom
> of the symbol. See screenshot:
> 
> 
> 
> But when the part is placed on the schematic, the reference
> designator is moved up to make room for the value field:
> I can’t figure out why it’s doing this.
> 
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to     : [email protected]
> 
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
> 
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to     : [email protected]
> 
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
> 
> 
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : [email protected]
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
> 

___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-26 Thread Andy Peters 


> On Nov 26, 2019, at 10:43 AM, Seth Hillbrand  wrote:
> 
> On 2019-11-26 08:47, Andy Peters wrote:
> 
>>> On Nov 25, 2019, at 7:02 PM, Adam Wolf  
>>> wrote:
>>> Andy, thank you so much for this.  I normally run through the releases but 
>>> I am quite behind on some work and you definitely prevented the macOS 
>>> release from holding everything up :)
>>> I'll trigger builds tonight--there already is a deep queue for nightlies, 
>>> and in the morning I'll upload them to downloads and let Wayne know so we 
>>> can announce.  Thanks everyone!
>> One more "bug," not sure if it's a bug or by design.
>> I use both Windows and macOS, and I set up Kicad 5.1.4 on a Windows machine. 
>> I wanted to copy my symbol table from the Mac to the PC, and I saw that for 
>> whatever reason my symbol table file didn't use $KICAD_SYMBOL_DIR, and 
>> instead it hardcoded the path to /Users/andy/Library/Application 
>> Support/kicad/library -- and that won't work on Windows. So I changed the 
>> entries to use the $KICAD_SYMBOL_DIR, and then I noticed that the 
>> environment variable on the Mac pointed to /Users/andy/Library/Application 
>> Support/kicad/library
>> I changed it (again, on the Mac) to the usual ~/Library/Application 
>> Support/kicad/library and Kicad didn't like that. I got a (broken) message 
>> box saying,
>> So the home-directory shortcut doesn't work. I honestly don't remember if it 
>> ever worked, or was meant to work.
> 
> Hi Andy-
> 
> Thank you for testing.  Please report all bugs to the bug tracker.  In thread 
> here will be lost and not tracked.

https://bugs.launchpad.net/kicad/+bug/1854087 


-A___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-26 Thread Seth Hillbrand 

On 2019-11-26 08:47, Andy Peters wrote:

On Nov 25, 2019, at 7:02 PM, Adam Wolf  
wrote:


Andy, thank you so much for this.  I normally run through the releases 
but I am quite behind on some work and you definitely prevented the 
macOS release from holding everything up :)


I'll trigger builds tonight--there already is a deep queue for 
nightlies, and in the morning I'll upload them to downloads and let 
Wayne know so we can announce.  Thanks everyone!


One more "bug," not sure if it's a bug or by design.

I use both Windows and macOS, and I set up Kicad 5.1.4 on a Windows 
machine. I wanted to copy my symbol table from the Mac to the PC, and I 
saw that for whatever reason my symbol table file didn't use 
$KICAD_SYMBOL_DIR, and instead it hardcoded the path to 
/Users/andy/Library/Application Support/kicad/library -- and that won't 
work on Windows. So I changed the entries to use the $KICAD_SYMBOL_DIR, 
and then I noticed that the environment variable on the Mac pointed to 
/Users/andy/Library/Application Support/kicad/library


I changed it (again, on the Mac) to the usual ~/Library/Application 
Support/kicad/library and Kicad didn't like that. I got a (broken) 
message box saying,


So the home-directory shortcut doesn't work. I honestly don't remember 
if it ever worked, or was meant to work.


Hi Andy-

Thank you for testing.  Please report all bugs to the bug tracker.  In 
thread here will be lost and not tracked.


Thanks-
Seth


Seth Hillbrand
KiCad Services Corporation
https://www.kipro-pcb.com
+1 530 302 5483 | +1 212 603 9372

___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-25 Thread Adam Wolf 
Does it sound like I can make this release?  While the application may
not be perfect, I haven't heard anything that makes me think the
packaging change is causing issues.

Adam

On Mon, Nov 25, 2019 at 9:48 AM Wayne Stambaugh  wrote:
>
> Hi Andy,
>
> On 11/22/19 2:21 PM, Andy Peters wrote:
> >
> >> On Nov 22, 2019, at 8:02 AM, Adam Wolf  >> > wrote:
> >>
> >> If folks on 10.14 or 10.15 could test
> >> https://kicad-downloads.s3.cern.ch/osx/stable/kicad-unified-5.1.5-rc1-10_14.dmg,
> >> and anyone still on 10.13 or lower could test
> >> https://kicad-downloads.s3.cern.ch/osx/stable/kicad-unified-5.1.5-rc2.dmg,
> >> that would be great.
> >
> > (On Catalina, not that I think it matters), one thing that popped up
> > immediately upon opening a schematic was a message box “Illegal t
> > entry found in project file symbol library.”
>
> This has nothing to do with your OS.  Somehow you have remapped an old
> project to use the symbol library table to look up symbol links and the
> library list in the project file did not get cleared.  There are several
> ways that this can happen.  Most of them involve manual operations like
> copying a file from another project or using version control to restore
> the project file.  The list of libraries is cleared after the dialog is
> dismissed so if you schematic doesn't have any broken symbol links,
> there is nothing to do.  This warning is there because an unexpected
> condition occurred that could cause broken symbol links when Eeschema
> attempts to repair the issue.
>
> >
> > “Symbol libraries defined in the project file symbol library list are no
> > longer supported and will be removed. This may cause broken
> > symbol library links under certain” and this sentence is not completed.
>
> This looks like an issue with the message dialog layout on macos.  The
> full string is shown on Linux.  Does resizing the dialog help?  If one
> of the macos devs wants to debug this, you have to add:
>
> [eeschema/libraries]
> LibName1=power
>
> to a project file then run Eeschema to show the dialog.  If the dialog
> doesn't show, you have to dig around the eeschem config file to enable it.
>
> >
> >
> >
> > The problem is that there’s no indication of what could be broken.
> >
> > When I looked at the design I didn’t see any missing symbols. I believe
> > the design was done in a 5.0.x Kicad, based on what I see in this
> > project’s kicad_pcb file.
> >
> > Also, oddly, in previous versions of Kicad — and this may be a Catalina
> > thing, not a Kicad thing, I’ll test on my Mojave machine — the various
> > application windows were all tabs under one Kicad window (the tabs could
> > be detached). Now the application windows are all separate. This is a
> > slight annoyance, in that the main Kicad menu doesn’t have a Window
> > menu, so you can’t mouse up to the top and choose Window -> PCB (or
> > whatever it would be). On a machine with more than one monitor this
> > isn’t really a problem, but on a single-display machine it’s annoying.
> > (Mousing down to the Dock, clicking-and-holding the Kicad icon and then
> > choosing “show all windows,” or using the equivalent hot-key, would
> > work.) Also you can’t do the various minimize/maximize things that are
> > standard window operations on macOS.
> >
> > -a
> >
> > ___
> > Mailing list: https://launchpad.net/~kicad-developers
> > Post to : [email protected]
> > Unsubscribe : https://launchpad.net/~kicad-developers
> > More help   : https://help.launchpad.net/ListHelp
> >
>
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : [email protected]
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp

___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-25 Thread Wayne Stambaugh 
Hi Andy,

On 11/22/19 2:21 PM, Andy Peters wrote:
> 
>> On Nov 22, 2019, at 8:02 AM, Adam Wolf > > wrote:
>>
>> If folks on 10.14 or 10.15 could test
>> https://kicad-downloads.s3.cern.ch/osx/stable/kicad-unified-5.1.5-rc1-10_14.dmg,
>> and anyone still on 10.13 or lower could test
>> https://kicad-downloads.s3.cern.ch/osx/stable/kicad-unified-5.1.5-rc2.dmg,
>> that would be great.
> 
> (On Catalina, not that I think it matters), one thing that popped up
> immediately upon opening a schematic was a message box “Illegal t
> entry found in project file symbol library.”

This has nothing to do with your OS.  Somehow you have remapped an old
project to use the symbol library table to look up symbol links and the
library list in the project file did not get cleared.  There are several
ways that this can happen.  Most of them involve manual operations like
copying a file from another project or using version control to restore
the project file.  The list of libraries is cleared after the dialog is
dismissed so if you schematic doesn't have any broken symbol links,
there is nothing to do.  This warning is there because an unexpected
condition occurred that could cause broken symbol links when Eeschema
attempts to repair the issue.

> 
> “Symbol libraries defined in the project file symbol library list are no
> longer supported and will be removed. This may cause broken
> symbol library links under certain” and this sentence is not completed.

This looks like an issue with the message dialog layout on macos.  The
full string is shown on Linux.  Does resizing the dialog help?  If one
of the macos devs wants to debug this, you have to add:

[eeschema/libraries]
LibName1=power

to a project file then run Eeschema to show the dialog.  If the dialog
doesn't show, you have to dig around the eeschem config file to enable it.

> 
> 
> 
> The problem is that there’s no indication of what could be broken.
> 
> When I looked at the design I didn’t see any missing symbols. I believe
> the design was done in a 5.0.x Kicad, based on what I see in this
> project’s kicad_pcb file.
> 
> Also, oddly, in previous versions of Kicad — and this may be a Catalina
> thing, not a Kicad thing, I’ll test on my Mojave machine — the various
> application windows were all tabs under one Kicad window (the tabs could
> be detached). Now the application windows are all separate. This is a
> slight annoyance, in that the main Kicad menu doesn’t have a Window
> menu, so you can’t mouse up to the top and choose Window -> PCB (or
> whatever it would be). On a machine with more than one monitor this
> isn’t really a problem, but on a single-display machine it’s annoying.
> (Mousing down to the Dock, clicking-and-holding the Kicad icon and then
> choosing “show all windows,” or using the equivalent hot-key, would
> work.) Also you can’t do the various minimize/maximize things that are
> standard window operations on macOS.
> 
> -a
> 
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : [email protected]
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
> 

___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-22 Thread Adam Wolf 
Of course, while there could be bugs in anything at any time :) the
main thing I'm concerned about is that I recently made a change to the
packager that builds release builds with a release version of
wxwidgets.   We were getting debug assertions popping up sometimes
(which are in Launchpad) on the nightlies, and Wayne and a few other
folks said let's make the releases not do that.  This is the first
release since then, so I'm just a little cautious.

Adam

On Fri, Nov 22, 2019 at 9:51 AM Andy Peters  wrote:
>
>
>
> > On Nov 22, 2019, at 8:02 AM, Adam Wolf  
> > wrote:
> >
> > If folks on 10.14 or 10.15 could test
> > https://kicad-downloads.s3.cern.ch/osx/stable/kicad-unified-5.1.5-rc1-10_14.dmg,
> > and anyone still on 10.13 or lower could test
> > https://kicad-downloads.s3.cern.ch/osx/stable/kicad-unified-5.1.5-rc2.dmg,
> > that would be great.
>
> I have all three. Will do so this weekend.
>
> -a
>
>
> >
> > Adam
> >
> > On Wed, Nov 20, 2019 at 7:11 PM Adam Wolf  
> > wrote:
> >>
> >> I set rc1 to build earlier today.  I can upload it when it finishes and if 
> >> folks can test it, I can easily rebuild as 5.1.5 tomorrow!
> >>
> >> On Wed, Nov 20, 2019, 4:59 PM Wayne Stambaugh  wrote:
> >>>
> >>> I'm willing to push the release date up if the MacOS package is ready.
> >>> Just let me know.
> >>>
> >>> Cheers,
> >>>
> >>> Wayne
> >>>
> >>> On 11/20/19 5:46 PM, Nick Østergaard wrote:
>  5.1.5 is fairly well rolled out now, thanks to various good people :)
> 
>  To make the release official, I think we are only needing the macos
>  build. @Adam Wolf  if you need any help, please speak up.
> 
> 
>  Nick
> 
>  On Wed, 20 Nov 2019 at 19:33, Steven A. Falco  
>  wrote:
> >
> > Fedora Rawhide has 5.1.5 now.  Fedora 30 and 31 will have 5.1.5 in a 
> > week or so, depending on whether we get any karma.
> >
> > Also of note - as of 5.1.5 we are now using OCC on all builds.  OCE is 
> > no longer needed for current Fedora releases.
> >
> >Steve
> >
> > On 11/17/19 11:56 AM, Rene Pöschl wrote:
> >> Libraries have been tagged.
> >>
> >> On 14/11/2019 18:36, Wayne Stambaugh wrote:
> >>> The 5.1 branch has been tagged for 5.1.5 and the source archive has be
> >>> uploaded to launchpad.  Please tag the library, doc, and translation
> >>> repos so we can fire up those packages builders.
> >>>
> >>> Thanks,
> >>>
> >>> Wayne
> >>>
> >>> On 11/13/19 3:55 PM, Wayne Stambaugh wrote:
>  It's been a couple of weeks since 5.1.5-rc1 was tagged and everything
>  seems to have stabilized nicely.  I'm going to tag 5.1.5 tomorrow 
>  around
>  noon EST unless something comes up.  I'm assuming the libraries,
>  documentation, and translations are ready to go and that it shouldn't
>  take too long to get most of the installer packages build and 
>  uploaded
>  to the KiCad website.  I would like to make the release announcement 
>  on
>  Wednesday, November 27th.  It would be something to be thankful for
>  leading into the US Thanksgiving Holiday.  If there are any issues 
>  with
>  this date, please let me know.  Thank you everyone for your continued
>  support of the KiCad project.
> 
>  Cheers,
> 
>  Wayne
> 
> >>> ___
> >>> Mailing list: https://launchpad.net/~kicad-developers
> >>> Post to : [email protected]
> >>> Unsubscribe : https://launchpad.net/~kicad-developers
> >>> More help   : https://help.launchpad.net/ListHelp
> >>
> >>
> >>
> >> ___
> >> Mailing list: https://launchpad.net/~kicad-developers
> >> Post to : [email protected]
> >> Unsubscribe : https://launchpad.net/~kicad-developers
> >> More help   : https://help.launchpad.net/ListHelp
> >
> >
> > ___
> > Mailing list: https://launchpad.net/~kicad-developers
> > Post to : [email protected]
> > Unsubscribe : https://launchpad.net/~kicad-developers
> > More help   : https://help.launchpad.net/ListHelp
> 
>  ___
>  Mailing list: https://launchpad.net/~kicad-developers
>  Post to : [email protected]
>  Unsubscribe : https://launchpad.net/~kicad-developers
>  More help   : https://help.launchpad.net/ListHelp
> 
> >>>
> >>> ___
> >>> Mailing list: https://launchpad.net/~kicad-developers
> >>> Post to : [email protected]
> >>> Unsubscribe : https://launchpad.net/~kicad-developers
> >>> More help   : https://help.launchpad.net/ListHelp
> >
> > __

Re: [Kicad-developers] 5.1.5 release tag

2019-11-22 Thread Andy Peters 


> On Nov 22, 2019, at 8:02 AM, Adam Wolf  wrote:
> 
> If folks on 10.14 or 10.15 could test
> https://kicad-downloads.s3.cern.ch/osx/stable/kicad-unified-5.1.5-rc1-10_14.dmg,
> and anyone still on 10.13 or lower could test
> https://kicad-downloads.s3.cern.ch/osx/stable/kicad-unified-5.1.5-rc2.dmg,
> that would be great.

I have all three. Will do so this weekend.

-a


> 
> Adam
> 
> On Wed, Nov 20, 2019 at 7:11 PM Adam Wolf  
> wrote:
>> 
>> I set rc1 to build earlier today.  I can upload it when it finishes and if 
>> folks can test it, I can easily rebuild as 5.1.5 tomorrow!
>> 
>> On Wed, Nov 20, 2019, 4:59 PM Wayne Stambaugh  wrote:
>>> 
>>> I'm willing to push the release date up if the MacOS package is ready.
>>> Just let me know.
>>> 
>>> Cheers,
>>> 
>>> Wayne
>>> 
>>> On 11/20/19 5:46 PM, Nick Østergaard wrote:
 5.1.5 is fairly well rolled out now, thanks to various good people :)
 
 To make the release official, I think we are only needing the macos
 build. @Adam Wolf  if you need any help, please speak up.
 
 
 Nick
 
 On Wed, 20 Nov 2019 at 19:33, Steven A. Falco  
 wrote:
> 
> Fedora Rawhide has 5.1.5 now.  Fedora 30 and 31 will have 5.1.5 in a week 
> or so, depending on whether we get any karma.
> 
> Also of note - as of 5.1.5 we are now using OCC on all builds.  OCE is no 
> longer needed for current Fedora releases.
> 
>Steve
> 
> On 11/17/19 11:56 AM, Rene Pöschl wrote:
>> Libraries have been tagged.
>> 
>> On 14/11/2019 18:36, Wayne Stambaugh wrote:
>>> The 5.1 branch has been tagged for 5.1.5 and the source archive has be
>>> uploaded to launchpad.  Please tag the library, doc, and translation
>>> repos so we can fire up those packages builders.
>>> 
>>> Thanks,
>>> 
>>> Wayne
>>> 
>>> On 11/13/19 3:55 PM, Wayne Stambaugh wrote:
 It's been a couple of weeks since 5.1.5-rc1 was tagged and everything
 seems to have stabilized nicely.  I'm going to tag 5.1.5 tomorrow 
 around
 noon EST unless something comes up.  I'm assuming the libraries,
 documentation, and translations are ready to go and that it shouldn't
 take too long to get most of the installer packages build and uploaded
 to the KiCad website.  I would like to make the release announcement on
 Wednesday, November 27th.  It would be something to be thankful for
 leading into the US Thanksgiving Holiday.  If there are any issues with
 this date, please let me know.  Thank you everyone for your continued
 support of the KiCad project.
 
 Cheers,
 
 Wayne
 
>>> ___
>>> Mailing list: https://launchpad.net/~kicad-developers
>>> Post to : [email protected]
>>> Unsubscribe : https://launchpad.net/~kicad-developers
>>> More help   : https://help.launchpad.net/ListHelp
>> 
>> 
>> 
>> ___
>> Mailing list: https://launchpad.net/~kicad-developers
>> Post to : [email protected]
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> More help   : https://help.launchpad.net/ListHelp
> 
> 
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : [email protected]
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
 
 ___
 Mailing list: https://launchpad.net/~kicad-developers
 Post to : [email protected]
 Unsubscribe : https://launchpad.net/~kicad-developers
 More help   : https://help.launchpad.net/ListHelp
 
>>> 
>>> ___
>>> Mailing list: https://launchpad.net/~kicad-developers
>>> Post to : [email protected]
>>> Unsubscribe : https://launchpad.net/~kicad-developers
>>> More help   : https://help.launchpad.net/ListHelp
> 
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : [email protected]
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp

Andy Peters
5511 E Rosewood St
Tucson, AZ 85711
520-907-2262
[email protected]




___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-22 Thread Adam Wolf 
If folks on 10.14 or 10.15 could test
https://kicad-downloads.s3.cern.ch/osx/stable/kicad-unified-5.1.5-rc1-10_14.dmg,
and anyone still on 10.13 or lower could test
https://kicad-downloads.s3.cern.ch/osx/stable/kicad-unified-5.1.5-rc2.dmg,
that would be great.

Adam

On Wed, Nov 20, 2019 at 7:11 PM Adam Wolf  wrote:
>
> I set rc1 to build earlier today.  I can upload it when it finishes and if 
> folks can test it, I can easily rebuild as 5.1.5 tomorrow!
>
> On Wed, Nov 20, 2019, 4:59 PM Wayne Stambaugh  wrote:
>>
>> I'm willing to push the release date up if the MacOS package is ready.
>> Just let me know.
>>
>> Cheers,
>>
>> Wayne
>>
>> On 11/20/19 5:46 PM, Nick Østergaard wrote:
>> > 5.1.5 is fairly well rolled out now, thanks to various good people :)
>> >
>> > To make the release official, I think we are only needing the macos
>> > build. @Adam Wolf  if you need any help, please speak up.
>> >
>> >
>> > Nick
>> >
>> > On Wed, 20 Nov 2019 at 19:33, Steven A. Falco  
>> > wrote:
>> >>
>> >> Fedora Rawhide has 5.1.5 now.  Fedora 30 and 31 will have 5.1.5 in a week 
>> >> or so, depending on whether we get any karma.
>> >>
>> >> Also of note - as of 5.1.5 we are now using OCC on all builds.  OCE is no 
>> >> longer needed for current Fedora releases.
>> >>
>> >> Steve
>> >>
>> >> On 11/17/19 11:56 AM, Rene Pöschl wrote:
>> >>> Libraries have been tagged.
>> >>>
>> >>> On 14/11/2019 18:36, Wayne Stambaugh wrote:
>>  The 5.1 branch has been tagged for 5.1.5 and the source archive has be
>>  uploaded to launchpad.  Please tag the library, doc, and translation
>>  repos so we can fire up those packages builders.
>> 
>>  Thanks,
>> 
>>  Wayne
>> 
>>  On 11/13/19 3:55 PM, Wayne Stambaugh wrote:
>> > It's been a couple of weeks since 5.1.5-rc1 was tagged and everything
>> > seems to have stabilized nicely.  I'm going to tag 5.1.5 tomorrow 
>> > around
>> > noon EST unless something comes up.  I'm assuming the libraries,
>> > documentation, and translations are ready to go and that it shouldn't
>> > take too long to get most of the installer packages build and uploaded
>> > to the KiCad website.  I would like to make the release announcement on
>> > Wednesday, November 27th.  It would be something to be thankful for
>> > leading into the US Thanksgiving Holiday.  If there are any issues with
>> > this date, please let me know.  Thank you everyone for your continued
>> > support of the KiCad project.
>> >
>> > Cheers,
>> >
>> > Wayne
>> >
>>  ___
>>  Mailing list: https://launchpad.net/~kicad-developers
>>  Post to : [email protected]
>>  Unsubscribe : https://launchpad.net/~kicad-developers
>>  More help   : https://help.launchpad.net/ListHelp
>> >>>
>> >>>
>> >>>
>> >>> ___
>> >>> Mailing list: https://launchpad.net/~kicad-developers
>> >>> Post to : [email protected]
>> >>> Unsubscribe : https://launchpad.net/~kicad-developers
>> >>> More help   : https://help.launchpad.net/ListHelp
>> >>
>> >>
>> >> ___
>> >> Mailing list: https://launchpad.net/~kicad-developers
>> >> Post to : [email protected]
>> >> Unsubscribe : https://launchpad.net/~kicad-developers
>> >> More help   : https://help.launchpad.net/ListHelp
>> >
>> > ___
>> > Mailing list: https://launchpad.net/~kicad-developers
>> > Post to : [email protected]
>> > Unsubscribe : https://launchpad.net/~kicad-developers
>> > More help   : https://help.launchpad.net/ListHelp
>> >
>>
>> ___
>> Mailing list: https://launchpad.net/~kicad-developers
>> Post to : [email protected]
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> More help   : https://help.launchpad.net/ListHelp

___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-20 Thread Adam Wolf 
I set rc1 to build earlier today.  I can upload it when it finishes and if
folks can test it, I can easily rebuild as 5.1.5 tomorrow!

On Wed, Nov 20, 2019, 4:59 PM Wayne Stambaugh  wrote:

> I'm willing to push the release date up if the MacOS package is ready.
> Just let me know.
>
> Cheers,
>
> Wayne
>
> On 11/20/19 5:46 PM, Nick Østergaard wrote:
> > 5.1.5 is fairly well rolled out now, thanks to various good people :)
> >
> > To make the release official, I think we are only needing the macos
> > build. @Adam Wolf  if you need any help, please speak up.
> >
> >
> > Nick
> >
> > On Wed, 20 Nov 2019 at 19:33, Steven A. Falco 
> wrote:
> >>
> >> Fedora Rawhide has 5.1.5 now.  Fedora 30 and 31 will have 5.1.5 in a
> week or so, depending on whether we get any karma.
> >>
> >> Also of note - as of 5.1.5 we are now using OCC on all builds.  OCE is
> no longer needed for current Fedora releases.
> >>
> >> Steve
> >>
> >> On 11/17/19 11:56 AM, Rene Pöschl wrote:
> >>> Libraries have been tagged.
> >>>
> >>> On 14/11/2019 18:36, Wayne Stambaugh wrote:
>  The 5.1 branch has been tagged for 5.1.5 and the source archive has be
>  uploaded to launchpad.  Please tag the library, doc, and translation
>  repos so we can fire up those packages builders.
> 
>  Thanks,
> 
>  Wayne
> 
>  On 11/13/19 3:55 PM, Wayne Stambaugh wrote:
> > It's been a couple of weeks since 5.1.5-rc1 was tagged and everything
> > seems to have stabilized nicely.  I'm going to tag 5.1.5 tomorrow
> around
> > noon EST unless something comes up.  I'm assuming the libraries,
> > documentation, and translations are ready to go and that it shouldn't
> > take too long to get most of the installer packages build and
> uploaded
> > to the KiCad website.  I would like to make the release announcement
> on
> > Wednesday, November 27th.  It would be something to be thankful for
> > leading into the US Thanksgiving Holiday.  If there are any issues
> with
> > this date, please let me know.  Thank you everyone for your continued
> > support of the KiCad project.
> >
> > Cheers,
> >
> > Wayne
> >
>  ___
>  Mailing list: https://launchpad.net/~kicad-developers
>  Post to : [email protected]
>  Unsubscribe : https://launchpad.net/~kicad-developers
>  More help   : https://help.launchpad.net/ListHelp
> >>>
> >>>
> >>>
> >>> ___
> >>> Mailing list: https://launchpad.net/~kicad-developers
> >>> Post to : [email protected]
> >>> Unsubscribe : https://launchpad.net/~kicad-developers
> >>> More help   : https://help.launchpad.net/ListHelp
> >>
> >>
> >> ___
> >> Mailing list: https://launchpad.net/~kicad-developers
> >> Post to : [email protected]
> >> Unsubscribe : https://launchpad.net/~kicad-developers
> >> More help   : https://help.launchpad.net/ListHelp
> >
> > ___
> > Mailing list: https://launchpad.net/~kicad-developers
> > Post to : [email protected]
> > Unsubscribe : https://launchpad.net/~kicad-developers
> > More help   : https://help.launchpad.net/ListHelp
> >
>
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : [email protected]
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
>
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-20 Thread Brüns , Stefan 
On Mittwoch, 20. November 2019 19:33:53 CET Steven A. Falco wrote:
> Fedora Rawhide has 5.1.5 now.  Fedora 30 and 31 will have 5.1.5 in a week or
> so, depending on whether we get any karma.
> 
> Also of note - as of 5.1.5 we are now using OCC on all builds.  OCE is no
> longer needed for current Fedora releases.
> 

openSUSE provides 5.1.5 for all stable (Leap) and rolling (Tumbleweed) 
distribution versions in the "electronics" project, and Tumbleweed users will 
receive it automatically in a few days.

electronics repo:

https://software.opensuse.org/download/package?
package=kicad&project=electronics

Kind regards,

Stefan
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-20 Thread Wayne Stambaugh 
I'm willing to push the release date up if the MacOS package is ready.
Just let me know.

Cheers,

Wayne

On 11/20/19 5:46 PM, Nick Østergaard wrote:
> 5.1.5 is fairly well rolled out now, thanks to various good people :)
> 
> To make the release official, I think we are only needing the macos
> build. @Adam Wolf  if you need any help, please speak up.
> 
> 
> Nick
> 
> On Wed, 20 Nov 2019 at 19:33, Steven A. Falco  wrote:
>>
>> Fedora Rawhide has 5.1.5 now.  Fedora 30 and 31 will have 5.1.5 in a week or 
>> so, depending on whether we get any karma.
>>
>> Also of note - as of 5.1.5 we are now using OCC on all builds.  OCE is no 
>> longer needed for current Fedora releases.
>>
>> Steve
>>
>> On 11/17/19 11:56 AM, Rene Pöschl wrote:
>>> Libraries have been tagged.
>>>
>>> On 14/11/2019 18:36, Wayne Stambaugh wrote:
 The 5.1 branch has been tagged for 5.1.5 and the source archive has be
 uploaded to launchpad.  Please tag the library, doc, and translation
 repos so we can fire up those packages builders.

 Thanks,

 Wayne

 On 11/13/19 3:55 PM, Wayne Stambaugh wrote:
> It's been a couple of weeks since 5.1.5-rc1 was tagged and everything
> seems to have stabilized nicely.  I'm going to tag 5.1.5 tomorrow around
> noon EST unless something comes up.  I'm assuming the libraries,
> documentation, and translations are ready to go and that it shouldn't
> take too long to get most of the installer packages build and uploaded
> to the KiCad website.  I would like to make the release announcement on
> Wednesday, November 27th.  It would be something to be thankful for
> leading into the US Thanksgiving Holiday.  If there are any issues with
> this date, please let me know.  Thank you everyone for your continued
> support of the KiCad project.
>
> Cheers,
>
> Wayne
>
 ___
 Mailing list: https://launchpad.net/~kicad-developers
 Post to : [email protected]
 Unsubscribe : https://launchpad.net/~kicad-developers
 More help   : https://help.launchpad.net/ListHelp
>>>
>>>
>>>
>>> ___
>>> Mailing list: https://launchpad.net/~kicad-developers
>>> Post to : [email protected]
>>> Unsubscribe : https://launchpad.net/~kicad-developers
>>> More help   : https://help.launchpad.net/ListHelp
>>
>>
>> ___
>> Mailing list: https://launchpad.net/~kicad-developers
>> Post to : [email protected]
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> More help   : https://help.launchpad.net/ListHelp
> 
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : [email protected]
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
> 

___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-20 Thread Nick Østergaard 
5.1.5 is fairly well rolled out now, thanks to various good people :)

To make the release official, I think we are only needing the macos
build. @Adam Wolf  if you need any help, please speak up.


Nick

On Wed, 20 Nov 2019 at 19:33, Steven A. Falco  wrote:
>
> Fedora Rawhide has 5.1.5 now.  Fedora 30 and 31 will have 5.1.5 in a week or 
> so, depending on whether we get any karma.
>
> Also of note - as of 5.1.5 we are now using OCC on all builds.  OCE is no 
> longer needed for current Fedora releases.
>
> Steve
>
> On 11/17/19 11:56 AM, Rene Pöschl wrote:
> > Libraries have been tagged.
> >
> > On 14/11/2019 18:36, Wayne Stambaugh wrote:
> >> The 5.1 branch has been tagged for 5.1.5 and the source archive has be
> >> uploaded to launchpad.  Please tag the library, doc, and translation
> >> repos so we can fire up those packages builders.
> >>
> >> Thanks,
> >>
> >> Wayne
> >>
> >> On 11/13/19 3:55 PM, Wayne Stambaugh wrote:
> >>> It's been a couple of weeks since 5.1.5-rc1 was tagged and everything
> >>> seems to have stabilized nicely.  I'm going to tag 5.1.5 tomorrow around
> >>> noon EST unless something comes up.  I'm assuming the libraries,
> >>> documentation, and translations are ready to go and that it shouldn't
> >>> take too long to get most of the installer packages build and uploaded
> >>> to the KiCad website.  I would like to make the release announcement on
> >>> Wednesday, November 27th.  It would be something to be thankful for
> >>> leading into the US Thanksgiving Holiday.  If there are any issues with
> >>> this date, please let me know.  Thank you everyone for your continued
> >>> support of the KiCad project.
> >>>
> >>> Cheers,
> >>>
> >>> Wayne
> >>>
> >> ___
> >> Mailing list: https://launchpad.net/~kicad-developers
> >> Post to : [email protected]
> >> Unsubscribe : https://launchpad.net/~kicad-developers
> >> More help   : https://help.launchpad.net/ListHelp
> >
> >
> >
> > ___
> > Mailing list: https://launchpad.net/~kicad-developers
> > Post to : [email protected]
> > Unsubscribe : https://launchpad.net/~kicad-developers
> > More help   : https://help.launchpad.net/ListHelp
>
>
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : [email protected]
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp

___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-20 Thread Steven A. Falco 
Fedora Rawhide has 5.1.5 now.  Fedora 30 and 31 will have 5.1.5 in a week or 
so, depending on whether we get any karma.

Also of note - as of 5.1.5 we are now using OCC on all builds.  OCE is no 
longer needed for current Fedora releases.

Steve

On 11/17/19 11:56 AM, Rene Pöschl wrote:
> Libraries have been tagged.
> 
> On 14/11/2019 18:36, Wayne Stambaugh wrote:
>> The 5.1 branch has been tagged for 5.1.5 and the source archive has be
>> uploaded to launchpad.  Please tag the library, doc, and translation
>> repos so we can fire up those packages builders.
>>
>> Thanks,
>>
>> Wayne
>>
>> On 11/13/19 3:55 PM, Wayne Stambaugh wrote:
>>> It's been a couple of weeks since 5.1.5-rc1 was tagged and everything
>>> seems to have stabilized nicely.  I'm going to tag 5.1.5 tomorrow around
>>> noon EST unless something comes up.  I'm assuming the libraries,
>>> documentation, and translations are ready to go and that it shouldn't
>>> take too long to get most of the installer packages build and uploaded
>>> to the KiCad website.  I would like to make the release announcement on
>>> Wednesday, November 27th.  It would be something to be thankful for
>>> leading into the US Thanksgiving Holiday.  If there are any issues with
>>> this date, please let me know.  Thank you everyone for your continued
>>> support of the KiCad project.
>>>
>>> Cheers,
>>>
>>> Wayne
>>>
>> ___
>> Mailing list: https://launchpad.net/~kicad-developers
>> Post to : [email protected]
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> More help   : https://help.launchpad.net/ListHelp
> 
> 
> 
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : [email protected]
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp


___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-20 Thread Jean-Samuel Reynaud 

And there is already 1200 downloads since yesterday...

Le 20/11/2019 à 17:17, Jean-Samuel Reynaud a écrit :
> Hi All,
> 
> Version 5.1.5 are now available on the PPA (ubuntu).
> 
> 
> Le 18/11/2019 à 12:06, Nick Østergaard a écrit :
>> Everything is tagged.
>>
>> @adam, you should be able to bump the macos releases as well.
>>
>> søn. 17. nov. 2019 17.57 skrev Rene Pöschl > >:
>>
>> Libraries have been tagged.
>>
>> On 14/11/2019 18:36, Wayne Stambaugh wrote:
>> > The 5.1 branch has been tagged for 5.1.5 and the source archive has be
>> > uploaded to launchpad.  Please tag the library, doc, and translation
>> > repos so we can fire up those packages builders.
>> >
>> > Thanks,
>> >
>> > Wayne
>> >
>> > On 11/13/19 3:55 PM, Wayne Stambaugh wrote:
>> >> It's been a couple of weeks since 5.1.5-rc1 was tagged and everything
>> >> seems to have stabilized nicely.  I'm going to tag 5.1.5 tomorrow
>> around
>> >> noon EST unless something comes up.  I'm assuming the libraries,
>> >> documentation, and translations are ready to go and that it shouldn't
>> >> take too long to get most of the installer packages build and
>> uploaded
>> >> to the KiCad website.  I would like to make the release
>> announcement on
>> >> Wednesday, November 27th.  It would be something to be thankful for
>> >> leading into the US Thanksgiving Holiday.  If there are any
>> issues with
>> >> this date, please let me know.  Thank you everyone for your continued
>> >> support of the KiCad project.
>> >>
>> >> Cheers,
>> >>
>> >> Wayne
>> >>
>> > ___
>> > Mailing list: https://launchpad.net/~kicad-developers
>> > Post to     : [email protected]
>> 
>> > Unsubscribe : https://launchpad.net/~kicad-developers
>> > More help   : https://help.launchpad.net/ListHelp
>>
>>
>>
>> ___
>> Mailing list: https://launchpad.net/~kicad-developers
>> Post to     : [email protected]
>> 
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> More help   : https://help.launchpad.net/ListHelp
>>
>>
>> ___
>> Mailing list: https://launchpad.net/~kicad-developers
>> Post to : [email protected]
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> More help   : https://help.launchpad.net/ListHelp
>>
> 


___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-20 Thread Jean-Samuel Reynaud 
Hi All,

Version 5.1.5 are now available on the PPA (ubuntu).


Le 18/11/2019 à 12:06, Nick Østergaard a écrit :
> Everything is tagged.
> 
> @adam, you should be able to bump the macos releases as well.
> 
> søn. 17. nov. 2019 17.57 skrev Rene Pöschl  >:
> 
> Libraries have been tagged.
> 
> On 14/11/2019 18:36, Wayne Stambaugh wrote:
> > The 5.1 branch has been tagged for 5.1.5 and the source archive has be
> > uploaded to launchpad.  Please tag the library, doc, and translation
> > repos so we can fire up those packages builders.
> >
> > Thanks,
> >
> > Wayne
> >
> > On 11/13/19 3:55 PM, Wayne Stambaugh wrote:
> >> It's been a couple of weeks since 5.1.5-rc1 was tagged and everything
> >> seems to have stabilized nicely.  I'm going to tag 5.1.5 tomorrow
> around
> >> noon EST unless something comes up.  I'm assuming the libraries,
> >> documentation, and translations are ready to go and that it shouldn't
> >> take too long to get most of the installer packages build and
> uploaded
> >> to the KiCad website.  I would like to make the release
> announcement on
> >> Wednesday, November 27th.  It would be something to be thankful for
> >> leading into the US Thanksgiving Holiday.  If there are any
> issues with
> >> this date, please let me know.  Thank you everyone for your continued
> >> support of the KiCad project.
> >>
> >> Cheers,
> >>
> >> Wayne
> >>
> > ___
> > Mailing list: https://launchpad.net/~kicad-developers
> > Post to     : [email protected]
> 
> > Unsubscribe : https://launchpad.net/~kicad-developers
> > More help   : https://help.launchpad.net/ListHelp
> 
> 
> 
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to     : [email protected]
> 
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
> 
> 
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : [email protected]
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
> 


___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-18 Thread Nick Østergaard 
Everything is tagged.

@adam, you should be able to bump the macos releases as well.

søn. 17. nov. 2019 17.57 skrev Rene Pöschl :

> Libraries have been tagged.
>
> On 14/11/2019 18:36, Wayne Stambaugh wrote:
> > The 5.1 branch has been tagged for 5.1.5 and the source archive has be
> > uploaded to launchpad.  Please tag the library, doc, and translation
> > repos so we can fire up those packages builders.
> >
> > Thanks,
> >
> > Wayne
> >
> > On 11/13/19 3:55 PM, Wayne Stambaugh wrote:
> >> It's been a couple of weeks since 5.1.5-rc1 was tagged and everything
> >> seems to have stabilized nicely.  I'm going to tag 5.1.5 tomorrow around
> >> noon EST unless something comes up.  I'm assuming the libraries,
> >> documentation, and translations are ready to go and that it shouldn't
> >> take too long to get most of the installer packages build and uploaded
> >> to the KiCad website.  I would like to make the release announcement on
> >> Wednesday, November 27th.  It would be something to be thankful for
> >> leading into the US Thanksgiving Holiday.  If there are any issues with
> >> this date, please let me know.  Thank you everyone for your continued
> >> support of the KiCad project.
> >>
> >> Cheers,
> >>
> >> Wayne
> >>
> > ___
> > Mailing list: https://launchpad.net/~kicad-developers
> > Post to : [email protected]
> > Unsubscribe : https://launchpad.net/~kicad-developers
> > More help   : https://help.launchpad.net/ListHelp
>
>
>
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : [email protected]
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
>
___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-17 Thread Rene Pöschl 

Libraries have been tagged.

On 14/11/2019 18:36, Wayne Stambaugh wrote:

The 5.1 branch has been tagged for 5.1.5 and the source archive has be
uploaded to launchpad.  Please tag the library, doc, and translation
repos so we can fire up those packages builders.

Thanks,

Wayne

On 11/13/19 3:55 PM, Wayne Stambaugh wrote:

It's been a couple of weeks since 5.1.5-rc1 was tagged and everything
seems to have stabilized nicely.  I'm going to tag 5.1.5 tomorrow around
noon EST unless something comes up.  I'm assuming the libraries,
documentation, and translations are ready to go and that it shouldn't
take too long to get most of the installer packages build and uploaded
to the KiCad website.  I would like to make the release announcement on
Wednesday, November 27th.  It would be something to be thankful for
leading into the US Thanksgiving Holiday.  If there are any issues with
this date, please let me know.  Thank you everyone for your continued
support of the KiCad project.

Cheers,

Wayne


___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp




___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-14 Thread Wayne Stambaugh 
Oops!  I forgot a few things.  Please run the launchpad script to set
the 5.1.5 bugs to "Fix Released".  The 5.1 branch is now open for
merging 5.1.6 bug fixes.

On 11/14/19 12:36 PM, Wayne Stambaugh wrote:
> The 5.1 branch has been tagged for 5.1.5 and the source archive has be
> uploaded to launchpad.  Please tag the library, doc, and translation
> repos so we can fire up those packages builders.
> 
> Thanks,
> 
> Wayne
> 
> On 11/13/19 3:55 PM, Wayne Stambaugh wrote:
>> It's been a couple of weeks since 5.1.5-rc1 was tagged and everything
>> seems to have stabilized nicely.  I'm going to tag 5.1.5 tomorrow around
>> noon EST unless something comes up.  I'm assuming the libraries,
>> documentation, and translations are ready to go and that it shouldn't
>> take too long to get most of the installer packages build and uploaded
>> to the KiCad website.  I would like to make the release announcement on
>> Wednesday, November 27th.  It would be something to be thankful for
>> leading into the US Thanksgiving Holiday.  If there are any issues with
>> this date, please let me know.  Thank you everyone for your continued
>> support of the KiCad project.
>>
>> Cheers,
>>
>> Wayne
>>

___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-14 Thread Wayne Stambaugh 
The 5.1 branch has been tagged for 5.1.5 and the source archive has be
uploaded to launchpad.  Please tag the library, doc, and translation
repos so we can fire up those packages builders.

Thanks,

Wayne

On 11/13/19 3:55 PM, Wayne Stambaugh wrote:
> It's been a couple of weeks since 5.1.5-rc1 was tagged and everything
> seems to have stabilized nicely.  I'm going to tag 5.1.5 tomorrow around
> noon EST unless something comes up.  I'm assuming the libraries,
> documentation, and translations are ready to go and that it shouldn't
> take too long to get most of the installer packages build and uploaded
> to the KiCad website.  I would like to make the release announcement on
> Wednesday, November 27th.  It would be something to be thankful for
> leading into the US Thanksgiving Holiday.  If there are any issues with
> this date, please let me know.  Thank you everyone for your continued
> support of the KiCad project.
> 
> Cheers,
> 
> Wayne
> 

___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-14 Thread Wayne Stambaugh 
Hi Marco,

There will be at least one more.  There are already a few minor bug
fixes that are queued up in master until after the 5.1.5 release.  After
that, it's hard to say.

Cheers,

Wayne

On 11/14/19 1:36 AM, Marco Ciampa wrote:
> On Wed, Nov 13, 2019 at 03:55:18PM -0500, Wayne Stambaugh wrote:
>> It's been a couple of weeks since 5.1.5-rc1 was tagged and everything
>> seems to have stabilized nicely.  I'm going to tag 5.1.5 tomorrow around
>> noon EST unless something comes up.  I'm assuming the libraries,
>> documentation, and translations are ready to go and that it shouldn't
>> take too long to get most of the installer packages build and uploaded
>> to the KiCad website.  I would like to make the release announcement on
>> Wednesday, November 27th.  It would be something to be thankful for
>> leading into the US Thanksgiving Holiday.  If there are any issues with
>> this date, please let me know.  Thank you everyone for your continued
>> support of the KiCad project.
> 
> Hi Wayne,
> do you think it will be last of the 5.* branch?
> 
> --
> 
> Saluton,
> Marco Ciampa
> 
> ___
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : [email protected]
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp
> 

___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp

Re: [Kicad-developers] 5.1.5 release tag

2019-11-13 Thread Marco Ciampa 
On Wed, Nov 13, 2019 at 03:55:18PM -0500, Wayne Stambaugh wrote:
> It's been a couple of weeks since 5.1.5-rc1 was tagged and everything
> seems to have stabilized nicely.  I'm going to tag 5.1.5 tomorrow around
> noon EST unless something comes up.  I'm assuming the libraries,
> documentation, and translations are ready to go and that it shouldn't
> take too long to get most of the installer packages build and uploaded
> to the KiCad website.  I would like to make the release announcement on
> Wednesday, November 27th.  It would be something to be thankful for
> leading into the US Thanksgiving Holiday.  If there are any issues with
> this date, please let me know.  Thank you everyone for your continued
> support of the KiCad project.

Hi Wayne,
do you think it will be last of the 5.* branch?

--

Saluton,
Marco Ciampa

___
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help   : https://help.launchpad.net/ListHelp